From: Ioana Ciornei Date: Wed, 15 Feb 2023 15:31:19 +0000 (+0200) Subject: board: freescale: ls1088a: remove code under !CONFIG_DM_ETH X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=a33b8baf20c571657f9fac75a48e1196fb576d52;p=u-boot.git board: freescale: ls1088a: remove code under !CONFIG_DM_ETH Now that DM_ETH is enabled by default, there is no point in keeping the non-DM_ETH code which initialized the ethernet interfaces. Signed-off-by: Ioana Ciornei Signed-off-by: Peng Fan --- diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c index 8fe643f70b..f62f5fd274 100644 --- a/board/freescale/ls1088a/eth_ls1088aqds.c +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -3,742 +3,9 @@ * Copyright 2017 NXP */ -#include -#include -#include -#include -#include -#include #include #include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include - -#include "../common/qixis.h" - -#include "ls1088a_qixis.h" - -#ifndef CONFIG_DM_ETH -#ifdef CONFIG_FSL_MC_ENET - -#define SFP_TX 0 - - /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks. - * Bank 1 -> Lanes A, B, C, D, - * Bank 2 -> Lanes A,B, C, D, - */ - - /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here - * means that the mapping must be determined dynamically, or that the lane - * maps to something other than a board slot. - */ - -static u8 lane_to_slot_fsm1[] = { - 0, 0, 0, 0, 0, 0, 0, 0 -}; - -/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs - * housed. - */ - -static int xqsgii_riser_phy_addr[] = { - XQSGMII_CARD_PHY1_PORT0_ADDR, - XQSGMII_CARD_PHY2_PORT0_ADDR, - XQSGMII_CARD_PHY3_PORT0_ADDR, - XQSGMII_CARD_PHY4_PORT0_ADDR, - XQSGMII_CARD_PHY3_PORT2_ADDR, - XQSGMII_CARD_PHY1_PORT2_ADDR, - XQSGMII_CARD_PHY4_PORT2_ADDR, - XQSGMII_CARD_PHY2_PORT2_ADDR, -}; - -static int sgmii_riser_phy_addr[] = { - SGMII_CARD_PORT1_PHY_ADDR, - SGMII_CARD_PORT2_PHY_ADDR, - SGMII_CARD_PORT3_PHY_ADDR, - SGMII_CARD_PORT4_PHY_ADDR, -}; - -/* Slot2 does not have EMI connections */ -#define EMI_NONE 0xFF -#define EMI1_RGMII1 0 -#define EMI1_RGMII2 1 -#define EMI1_SLOT1 2 - -static const char * const mdio_names[] = { - "LS1088A_QDS_MDIO0", - "LS1088A_QDS_MDIO1", - "LS1088A_QDS_MDIO2", - DEFAULT_WRIOP_MDIO2_NAME, -}; - -struct ls1088a_qds_mdio { - u8 muxval; - struct mii_dev *realbus; -}; - -struct reg_pair { - uint addr; - u8 *val; -}; - -static void sgmii_configure_repeater(int dpmac) -{ - struct mii_dev *bus; - uint8_t a = 0xf; - int i, j, k, ret; - unsigned short value; - const char *dev = "LS1088A_QDS_MDIO2"; - int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; - int i2c_phy_addr = 0; - int phy_addr = 0; - - uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; - uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; - uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - - u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20}; - struct reg_pair reg_pair[10] = { - {6, ®_val[0]}, {4, ®_val[1]}, - {8, ®_val[2]}, {0xf, NULL}, - {0x11, NULL}, {0x16, NULL}, - {0x18, NULL}, {0x23, ®_val[3]}, - {0x2d, ®_val[4]}, {4, ®_val[5]}, - }; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *udev; -#endif - - /* Set I2c to Slot 1 */ -#if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(0x77, 0, 0, &a, 1); -#else - ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev); - if (!ret) - ret = dm_i2c_write(udev, 0, &a, 1); -#endif - if (ret) - goto error; - - switch (dpmac) { - case 1: - i2c_phy_addr = i2c_addr[1]; - phy_addr = 4; - break; - case 2: - i2c_phy_addr = i2c_addr[0]; - phy_addr = 0; - break; - case 3: - i2c_phy_addr = i2c_addr[3]; - phy_addr = 0xc; - break; - case 7: - i2c_phy_addr = i2c_addr[2]; - phy_addr = 8; - break; - } - - /* Check the PHY status */ - ret = miiphy_set_current_dev(dev); - if (ret > 0) - goto error; - - bus = mdio_get_current_dev(); - debug("Reading from bus %s\n", bus->name); - - ret = miiphy_write(dev, phy_addr, 0x1f, 3); - if (ret > 0) - goto error; - - mdelay(10); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - if (ret > 0) - goto error; - - mdelay(10); - - if ((value & 0xfff) == 0x401) { - miiphy_write(dev, phy_addr, 0x1f, 0); - printf("DPMAC %d:PHY is ..... Configured\n", dpmac); - return; - } - -#if CONFIG_IS_ENABLED(DM_I2C) - i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev); -#endif - - for (i = 0; i < 4; i++) { - for (j = 0; j < 4; j++) { - reg_pair[3].val = &ch_a_eq[i]; - reg_pair[4].val = &ch_a_ctl2[j]; - reg_pair[5].val = &ch_b_eq[i]; - reg_pair[6].val = &ch_b_ctl2[j]; - for (k = 0; k < 10; k++) { -#if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(i2c_phy_addr, - reg_pair[k].addr, - 1, reg_pair[k].val, 1); -#else - ret = i2c_get_chip_for_busnum(0, - i2c_phy_addr, - 1, &udev); - if (!ret) - ret = dm_i2c_write(udev, - reg_pair[k].addr, - reg_pair[k].val, 1); -#endif - if (ret) - goto error; - } - - mdelay(100); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - if (ret > 0) - goto error; - - mdelay(100); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - if (ret > 0) - goto error; - - if ((value & 0xfff) == 0x401) { - printf("DPMAC %d :PHY is configured ", - dpmac); - printf("after setting repeater 0x%x\n", - value); - i = 5; - j = 5; - } else { - printf("DPMAC %d :PHY is failed to ", - dpmac); - printf("configure the repeater 0x%x\n", value); - } - } - } - miiphy_write(dev, phy_addr, 0x1f, 0); -error: - if (ret) - printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac); - return; -} - -static void qsgmii_configure_repeater(int dpmac) -{ - uint8_t a = 0xf; - int i, j, k; - int i2c_phy_addr = 0; - int phy_addr = 0; - int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; - - uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; - uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; - uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - - u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20}; - struct reg_pair reg_pair[10] = { - {6, ®_val[0]}, {4, ®_val[1]}, - {8, ®_val[2]}, {0xf, NULL}, - {0x11, NULL}, {0x16, NULL}, - {0x18, NULL}, {0x23, ®_val[3]}, - {0x2d, ®_val[4]}, {4, ®_val[5]}, - }; - - const char *dev = mdio_names[EMI1_SLOT1]; - int ret = 0; - unsigned short value; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *udev; -#endif - - /* Set I2c to Slot 1 */ -#if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(0x77, 0, 0, &a, 1); -#else - ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev); - if (!ret) - ret = dm_i2c_write(udev, 0, &a, 1); -#endif - if (ret) - goto error; - - switch (dpmac) { - case 7: - case 8: - case 9: - case 10: - i2c_phy_addr = i2c_addr[2]; - phy_addr = 8; - break; - - case 3: - case 4: - case 5: - case 6: - i2c_phy_addr = i2c_addr[3]; - phy_addr = 0xc; - break; - } - - /* Check the PHY status */ - ret = miiphy_set_current_dev(dev); - ret = miiphy_write(dev, phy_addr, 0x1f, 3); - mdelay(10); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - mdelay(10); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - mdelay(10); - if ((value & 0xf) == 0xf) { - miiphy_write(dev, phy_addr, 0x1f, 0); - printf("DPMAC %d :PHY is ..... Configured\n", dpmac); - return; - } - -#if CONFIG_IS_ENABLED(DM_I2C) - i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev); -#endif - - for (i = 0; i < 4; i++) { - for (j = 0; j < 4; j++) { - reg_pair[3].val = &ch_a_eq[i]; - reg_pair[4].val = &ch_a_ctl2[j]; - reg_pair[5].val = &ch_b_eq[i]; - reg_pair[6].val = &ch_b_ctl2[j]; - - for (k = 0; k < 10; k++) { -#if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(i2c_phy_addr, - reg_pair[k].addr, - 1, reg_pair[k].val, 1); -#else - ret = i2c_get_chip_for_busnum(0, - i2c_addr[dpmac], - 1, &udev); - if (!ret) - ret = dm_i2c_write(udev, - reg_pair[k].addr, - reg_pair[k].val, 1); -#endif - if (ret) - goto error; - } - - ret = miiphy_read(dev, phy_addr, 0x11, &value); - if (ret > 0) - goto error; - mdelay(1); - ret = miiphy_read(dev, phy_addr, 0x11, &value); - if (ret > 0) - goto error; - mdelay(10); - if ((value & 0xf) == 0xf) { - miiphy_write(dev, phy_addr, 0x1f, 0); - printf("DPMAC %d :PHY is ..... Configured\n", - dpmac); - return; - } - } - } -error: - printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac); - return; -} - -static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval) -{ - return mdio_names[muxval]; -} - -struct mii_dev *mii_dev_for_muxval(u8 muxval) -{ - struct mii_dev *bus; - const char *name = ls1088a_qds_mdio_name_for_muxval(muxval); - - if (!name) { - printf("No bus for muxval %x\n", muxval); - return NULL; - } - - bus = miiphy_get_dev_by_name(name); - - if (!bus) { - printf("No bus by name %s\n", name); - return NULL; - } - - return bus; -} - -static void ls1088a_qds_enable_SFP_TX(u8 muxval) -{ - u8 brdcfg9; - - brdcfg9 = QIXIS_READ(brdcfg[9]); - brdcfg9 &= ~BRDCFG9_SFPTX_MASK; - brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT); - QIXIS_WRITE(brdcfg[9], brdcfg9); -} - -static void ls1088a_qds_mux_mdio(u8 muxval) -{ - u8 brdcfg4; - - if (muxval <= 5) { - brdcfg4 = QIXIS_READ(brdcfg[4]); - brdcfg4 &= ~BRDCFG4_EMISEL_MASK; - brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); - QIXIS_WRITE(brdcfg[4], brdcfg4); - } -} - -static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr, - int devad, int regnum) -{ - struct ls1088a_qds_mdio *priv = bus->priv; - - ls1088a_qds_mux_mdio(priv->muxval); - - return priv->realbus->read(priv->realbus, addr, devad, regnum); -} - -static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, - int regnum, u16 value) -{ - struct ls1088a_qds_mdio *priv = bus->priv; - - ls1088a_qds_mux_mdio(priv->muxval); - - return priv->realbus->write(priv->realbus, addr, devad, regnum, value); -} - -static int ls1088a_qds_mdio_reset(struct mii_dev *bus) -{ - struct ls1088a_qds_mdio *priv = bus->priv; - - return priv->realbus->reset(priv->realbus); -} - -static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval) -{ - struct ls1088a_qds_mdio *pmdio; - struct mii_dev *bus = mdio_alloc(); - - if (!bus) { - printf("Failed to allocate ls1088a_qds MDIO bus\n"); - return -1; - } - - pmdio = malloc(sizeof(*pmdio)); - if (!pmdio) { - printf("Failed to allocate ls1088a_qds private data\n"); - free(bus); - return -1; - } - - bus->read = ls1088a_qds_mdio_read; - bus->write = ls1088a_qds_mdio_write; - bus->reset = ls1088a_qds_mdio_reset; - sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval)); - - pmdio->realbus = miiphy_get_dev_by_name(realbusname); - - if (!pmdio->realbus) { - printf("No bus with name %s\n", realbusname); - free(bus); - free(pmdio); - return -1; - } - - pmdio->muxval = muxval; - bus->priv = pmdio; - - return mdio_register(bus); -} - -/* - * Initialize the dpmac_info array. - * - */ -static void initialize_dpmac_to_slot(void) -{ - struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - u32 serdes1_prtcl, cfg; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); - - switch (serdes1_prtcl) { - case 0x12: - printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); - lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; - break; - case 0x15: - case 0x1D: - printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); - lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[2] = EMI_NONE; - lane_to_slot_fsm1[3] = EMI_NONE; - break; - case 0x1E: - printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); - lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[3] = EMI_NONE; - break; - case 0x3A: - printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); - lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[1] = EMI_NONE; - lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; - lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; - break; - - default: - printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", - __func__, serdes1_prtcl); - break; - } -} - -void ls1088a_handle_phy_interface_sgmii(int dpmac_id) -{ - struct mii_dev *bus; - struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - u32 serdes1_prtcl, cfg; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); - - int *riser_phy_addr; - char *env_hwconfig = env_get("hwconfig"); - - if (hwconfig_f("xqsgmii", env_hwconfig)) - riser_phy_addr = &xqsgii_riser_phy_addr[0]; - else - riser_phy_addr = &sgmii_riser_phy_addr[0]; - - switch (serdes1_prtcl) { - case 0x12: - case 0x15: - case 0x1E: - case 0x3A: - switch (dpmac_id) { - case 1: - wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]); - break; - case 2: - wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]); - break; - case 3: - wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]); - break; - case 7: - wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]); - break; - default: - printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id); - break; - } - break; - default: - printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", - __func__, serdes1_prtcl); - return; - } - dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; - bus = mii_dev_for_muxval(EMI1_SLOT1); - wriop_set_mdio(dpmac_id, bus); -} - -void ls1088a_handle_phy_interface_qsgmii(int dpmac_id) -{ - struct mii_dev *bus; - struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - u32 serdes1_prtcl, cfg; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); - - switch (serdes1_prtcl) { - case 0x1D: - case 0x1E: - switch (dpmac_id) { - case 3: - case 4: - case 5: - case 6: - wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9); - break; - case 7: - case 8: - case 9: - case 10: - wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1); - break; - } - - dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; - bus = mii_dev_for_muxval(EMI1_SLOT1); - wriop_set_mdio(dpmac_id, bus); - break; - default: - printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", - serdes1_prtcl); - break; - } -} - -void ls1088a_handle_phy_interface_xsgmii(int i) -{ - struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - u32 serdes1_prtcl, cfg; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); - - switch (serdes1_prtcl) { - case 0x15: - case 0x1D: - case 0x1E: - wriop_set_phy_address(i, 0, i + 26); - ls1088a_qds_enable_SFP_TX(SFP_TX); - break; - default: - printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", - serdes1_prtcl); - break; - } -} - -static void ls1088a_handle_phy_interface_rgmii(int dpmac_id) -{ - struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - u32 serdes1_prtcl, cfg; - struct mii_dev *bus; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); - - switch (dpmac_id) { - case 4: - wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR); - dpmac_info[dpmac_id].board_mux = EMI1_RGMII1; - bus = mii_dev_for_muxval(EMI1_RGMII1); - wriop_set_mdio(dpmac_id, bus); - break; - case 5: - wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR); - dpmac_info[dpmac_id].board_mux = EMI1_RGMII2; - bus = mii_dev_for_muxval(EMI1_RGMII2); - wriop_set_mdio(dpmac_id, bus); - break; - default: - printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n", - serdes1_prtcl); - break; - } -} -#endif - -int board_eth_init(struct bd_info *bis) -{ - int error = 0, i; -#ifdef CONFIG_FSL_MC_ENET - struct memac_mdio_info *memac_mdio0_info; - char *env_hwconfig = env_get("hwconfig"); - - initialize_dpmac_to_slot(); - - memac_mdio0_info = (struct memac_mdio_info *)malloc( - sizeof(struct memac_mdio_info)); - memac_mdio0_info->regs = - (struct memac_mdio_controller *) - CFG_SYS_FSL_WRIOP1_MDIO1; - memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME; - - /* Register the real MDIO1 bus */ - fm_memac_mdio_init(bis, memac_mdio0_info); - /* Register the muxing front-ends to the MDIO buses */ - ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1); - ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2); - ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); - - for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { - switch (wriop_get_enet_if(i)) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - ls1088a_handle_phy_interface_rgmii(i); - break; - case PHY_INTERFACE_MODE_QSGMII: - ls1088a_handle_phy_interface_qsgmii(i); - break; - case PHY_INTERFACE_MODE_SGMII: - ls1088a_handle_phy_interface_sgmii(i); - break; - case PHY_INTERFACE_MODE_XGMII: - ls1088a_handle_phy_interface_xsgmii(i); - break; - default: - break; - - if (i == 16) - i = NUM_WRIOP_PORTS; - } - } - - error = cpu_eth_init(bis); - - if (hwconfig_f("xqsgmii", env_hwconfig)) { - for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { - switch (wriop_get_enet_if(i)) { - case PHY_INTERFACE_MODE_QSGMII: - qsgmii_configure_repeater(i); - break; - case PHY_INTERFACE_MODE_SGMII: - sgmii_configure_repeater(i); - break; - default: - break; - } - - if (i == 16) - i = NUM_WRIOP_PORTS; - } - } -#endif - error = pci_eth_init(bis); - return error; -} -#endif // !CONFIG_DM_ETH #if defined(CONFIG_RESET_PHY_R) void reset_phy(void) @@ -747,10 +14,10 @@ void reset_phy(void) } #endif /* CONFIG_RESET_PHY_R */ -#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT) +#if defined(CONFIG_MULTI_DTB_FIT) -/* Structure to hold SERDES protocols supported in case of - * CONFIG_DM_ETH enabled (network interfaces are described in the DTS). +/* Structure to hold SERDES protocols supported (network interfaces are + * described in the DTS). * * @serdes_block: the index of the SERDES block * @serdes_protocol: the decimal value of the protocol supported diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c index 5792070f93..fb6f9c1a81 100644 --- a/board/freescale/ls1088a/eth_ls1088ardb.c +++ b/board/freescale/ls1088a/eth_ls1088ardb.c @@ -3,100 +3,7 @@ * Copyright 2017 NXP */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include -#include - -#ifndef CONFIG_DM_ETH -int board_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_FSL_MC_ENET) - int i, interface; - struct memac_mdio_info mdio_info; - struct mii_dev *dev; - struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR); - struct memac_mdio_controller *reg; - u32 srds_s1, cfg; - - cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & - FSL_CHASSIS3_SRDS1_PRTCL_MASK; - cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; - - srds_s1 = serdes_get_number(FSL_SRDS_1, cfg); - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; - - /* Register the EMI 1 */ - fm_memac_mdio_init(bis, &mdio_info); - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; - - /* Register the EMI 2 */ - fm_memac_mdio_init(bis, &mdio_info); - - switch (srds_s1) { - case 0x1D: - /* - * 10GBase-R does not need a PHY to work, but to avoid U-boot - * use default PHY address which is zero to a MAC when it found - * a MAC has no PHY address, we give a PHY address to 10GBase-R - * MAC error. - */ - wriop_set_phy_address(WRIOP1_DPMAC1, 0, 0x0a); - wriop_set_phy_address(WRIOP1_DPMAC2, 0, AQ_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC3, 0, QSGMII1_PORT1_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC4, 0, QSGMII1_PORT2_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC5, 0, QSGMII1_PORT3_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC6, 0, QSGMII1_PORT4_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC7, 0, QSGMII2_PORT1_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC8, 0, QSGMII2_PORT2_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC9, 0, QSGMII2_PORT3_PHY_ADDR); - wriop_set_phy_address(WRIOP1_DPMAC10, 0, - QSGMII2_PORT4_PHY_ADDR); - - break; - default: - printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n", - srds_s1); - break; - } - - for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) { - interface = wriop_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_QSGMII: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); - wriop_set_mdio(i, dev); - break; - default: - break; - } - } - - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); - wriop_set_mdio(WRIOP1_DPMAC2, dev); - - cpu_eth_init(bis); -#endif /* CONFIG_FMAN_ENET */ - - return pci_eth_init(bis); -} -#endif #if defined(CONFIG_RESET_PHY_R) void reset_phy(void) diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 0d3f22ce2b..7a1047a77f 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -824,7 +824,7 @@ int board_init(void) ppa_init(); #endif -#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) pci_init(); #endif