From: Po Liu <po.liu@freescale.com>
Date: Thu, 26 Sep 2013 01:40:11 +0000 (+0800)
Subject: powerpc/c29xpcie: add DDR ECC on off config setting
X-Git-Tag: v2025.01-rc5-pxa1908~15783
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=9c25ee6d3a63d450a89ed5bb35002210a91699a2;p=u-boot.git

powerpc/c29xpcie: add DDR ECC on off config setting

c29xpcie REV_A board DDR ECC chip has bad impedance in hardware,
force that kind of board to be DDR ECC off when booting.
Other version board config ECC on/off by hwconfig=fsl_ddr:ecc=on
in uboot enviroment.

Signed-off-by: Po Liu <Po.Liu@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
---

diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c
index 804ea1916d..57a9b610ea 100644
--- a/board/freescale/c29xpcie/ddr.c
+++ b/board/freescale/c29xpcie/ddr.c
@@ -9,6 +9,9 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
+#include "cpld.h"
+
+#define C29XPCIE_HARDWARE_REVA	0x40
 /*
  * Micron MT41J128M16HA-15E
  * */
@@ -61,7 +64,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
 {
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 	int i;
+
 	popts->clk_adjust = 4;
 	popts->cpo_override = 0x1f;
 	popts->write_data_delay = 4;
@@ -79,6 +84,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	popts->trwt_override = 1;
 	popts->trwt = 0;
 
+	if (in_8(&cpld_data->hwver) == C29XPCIE_HARDWARE_REVA)
+		popts->ecc_mode = 0;
+
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index cce2288da8..913e626b31 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -433,6 +433,8 @@
 
 #define CONFIG_BAUDRATE		115200
 
+#define CONFIG_DEF_HWCONFIG	fsl_ddr:ecc=on
+
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\
 	"netdev=eth0\0"						\