From: Wenyou Yang Date: Tue, 18 Apr 2017 05:49:39 +0000 (+0800) Subject: ARM: dts: at91: Add dts files for at91sam9263ek X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=6cb2a7fe81c024fe88ea5e83927c1cc2ff26ee59;p=u-boot.git ARM: dts: at91: Add dts files for at91sam9263ek The device tree source files of at91sam9263ek boards are copied from the Linux v4.10, do the changes as below. - Add the reg property for the pinctrl node. - Move the gpio (pioA, pioB, pioC, pioD, pioE) nodes as the pinctrl's slibling nodes, instead of the child nodes. - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used in board_init_f stage. - Fix the compilation warnings. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 916958e4dc..02836f1679 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -352,6 +352,8 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2e-evm.dtb \ keystone-k2g-evm.dtb +dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb + dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \ diff --git a/arch/arm/dts/at91sam9263.dtsi b/arch/arm/dts/at91sam9263.dtsi index 93446420af..e899fd3f6a 100644 --- a/arch/arm/dts/at91sam9263.dtsi +++ b/arch/arm/dts/at91sam9263.dtsi @@ -77,12 +77,14 @@ #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + u-boot,dm-pre-reloc; aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; @@ -100,6 +102,7 @@ #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; + u-boot,dm-pre-reloc; main_osc: main_osc { compatible = "atmel,at91rm9200-clk-main-osc"; @@ -114,7 +117,7 @@ clocks = <&main_osc>; }; - plla: pllack { + plla: pllack@0 { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_LOCKA>; @@ -126,7 +129,7 @@ <190000000 240000000 2 1>; }; - pllb: pllbck { + pllb: pllbck@1 { compatible = "atmel,at91rm9200-clk-pll"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_LOCKB>; @@ -145,6 +148,7 @@ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 120000000>; atmel,clk-divisors = <1 2 4 0>; + u-boot,dm-pre-reloc; }; usb: usbck { @@ -161,25 +165,25 @@ interrupt-parent = <&pmc>; clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - prog0: prog0 { + prog0: prog@0 { #clock-cells = <0>; reg = <0>; interrupts = ; }; - prog1: prog1 { + prog1: prog@1 { #clock-cells = <0>; reg = <1>; interrupts = ; }; - prog2: prog2 { + prog2: prog@2 { #clock-cells = <0>; reg = <2>; interrupts = ; }; - prog3: prog3 { + prog3: prog@3 { #clock-cells = <0>; reg = <3>; interrupts = ; @@ -191,37 +195,37 @@ #address-cells = <1>; #size-cells = <0>; - uhpck: uhpck { + uhpck: uhpck@6 { #clock-cells = <0>; reg = <6>; clocks = <&usb>; }; - udpck: udpck { + udpck: udpck@7 { #clock-cells = <0>; reg = <7>; clocks = <&usb>; }; - pck0: pck0 { + pck0: pck0@8 { #clock-cells = <0>; reg = <8>; clocks = <&prog0>; }; - pck1: pck1 { + pck1: pck1@9 { #clock-cells = <0>; reg = <9>; clocks = <&prog1>; }; - pck2: pck2 { + pck2: pck2@10 { #clock-cells = <0>; reg = <10>; clocks = <&prog2>; }; - pck3: pck3 { + pck3: pck3@11 { #clock-cells = <0>; reg = <11>; clocks = <&prog3>; @@ -233,123 +237,127 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mck>; + u-boot,dm-pre-reloc; - pioA_clk: pioA_clk { + pioA_clk: pioA_clk@2 { #clock-cells = <0>; reg = <2>; + u-boot,dm-pre-reloc; }; - pioB_clk: pioB_clk { + pioB_clk: pioB_clk@3 { #clock-cells = <0>; reg = <3>; + u-boot,dm-pre-reloc; }; - pioCDE_clk: pioCDE_clk { + pioCDE_clk: pioCDE_clk@4 { #clock-cells = <0>; reg = <4>; + u-boot,dm-pre-reloc; }; - usart0_clk: usart0_clk { + usart0_clk: usart0_clk@7 { #clock-cells = <0>; reg = <7>; }; - usart1_clk: usart1_clk { + usart1_clk: usart1_clk@8 { #clock-cells = <0>; reg = <8>; }; - usart2_clk: usart2_clk { + usart2_clk: usart2_clk@9 { #clock-cells = <0>; reg = <9>; }; - mci0_clk: mci0_clk { + mci0_clk: mci0_clk@10 { #clock-cells = <0>; reg = <10>; }; - mci1_clk: mci1_clk { + mci1_clk: mci1_clk@11 { #clock-cells = <0>; reg = <11>; }; - can_clk: can_clk { + can_clk: can_clk@12 { #clock-cells = <0>; reg = <12>; }; - twi0_clk: twi0_clk { + twi0_clk: twi0_clk@13 { #clock-cells = <0>; reg = <13>; }; - spi0_clk: spi0_clk { + spi0_clk: spi0_clk@14 { #clock-cells = <0>; reg = <14>; }; - spi1_clk: spi1_clk { + spi1_clk: spi1_clk@15 { #clock-cells = <0>; reg = <15>; }; - ssc0_clk: ssc0_clk { + ssc0_clk: ssc0_clk@16 { #clock-cells = <0>; reg = <16>; }; - ssc1_clk: ssc1_clk { + ssc1_clk: ssc1_clk@17 { #clock-cells = <0>; reg = <17>; }; - ac97_clk: ac97_clk { + ac97_clk: ac97_clk@18 { #clock-cells = <0>; reg = <18>; }; - tcb_clk: tcb_clk { + tcb_clk: tcb_clk@19 { #clock-cells = <0>; reg = <19>; }; - pwm_clk: pwm_clk { + pwm_clk: pwm_clk@20 { #clock-cells = <0>; reg = <20>; }; - macb0_clk: macb0_clk { + macb0_clk: macb0_clk@21 { #clock-cells = <0>; reg = <21>; }; - g2de_clk: g2de_clk { + g2de_clk: g2de_clk@23 { #clock-cells = <0>; reg = <23>; }; - udc_clk: udc_clk { + udc_clk: udc_clk@24 { #clock-cells = <0>; reg = <24>; }; - isi_clk: isi_clk { + isi_clk: isi_clk@25 { #clock-cells = <0>; reg = <25>; }; - lcd_clk: lcd_clk { + lcd_clk: lcd_clk@26 { #clock-cells = <0>; reg = <26>; }; - dma_clk: dma_clk { + dma_clk: dma_clk@27 { #clock-cells = <0>; reg = <27>; }; - ohci_clk: ohci_clk { + ohci_clk: ohci_clk@29 { #clock-cells = <0>; reg = <29>; }; @@ -398,6 +406,12 @@ #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; + reg = <0xfffff200 0x200 + 0xfffff400 0x200 + 0xfffff600 0x200 + 0xfffff800 0x200 + 0xfffffa00 0x200 + >; atmel,mux-mask = < /* A B */ @@ -412,8 +426,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - ; /* PC31 periph with pullup */ + ; }; }; @@ -707,60 +721,66 @@ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioA_clk>; - }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioB_clk>; - }; + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + u-boot,dm-pre-reloc; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; - }; + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + u-boot,dm-pre-reloc; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; - }; + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; + u-boot,dm-pre-reloc; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x200>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; - }; + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; + u-boot,dm-pre-reloc; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; + u-boot,dm-pre-reloc; }; dbgu: serial@ffffee00 { @@ -1019,7 +1039,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/dts/at91sam9263ek.dts b/arch/arm/dts/at91sam9263ek.dts new file mode 100644 index 0000000000..8cd7fada4f --- /dev/null +++ b/arch/arm/dts/at91sam9263ek.dts @@ -0,0 +1,229 @@ +/* + * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2 only + */ +/dts-v1/; +#include "at91sam9263.dtsi" + +/ { + model = "Atmel at91sam9263ek"; + compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; + u-boot,dm-pre-reloc; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16367660>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fff78000 { + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + ; /* PE19 gpio WP pin pull up */ + }; + }; + }; + + spi0: spi@fffa4000 { + status = "okay"; + cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + fb0: fb@0x00700000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + + usb0: ohci@00a00000 { + num-ports = <2>; + status = "okay"; + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH + >; + }; + }; + + leds { + compatible = "gpio-leds"; + + d3 { + label = "d3"; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + d2 { + label = "d2"; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; + linux,default-trigger = "nand-disk"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + left_click { + label = "left_click"; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; + linux,code = <272>; + wakeup-source; + }; + + right_click { + label = "right_click"; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; + linux,code = <273>; + wakeup-source; + }; + }; + + i2c-gpio-0 { + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; +};