From: Caleb Connolly Date: Tue, 7 Nov 2023 12:41:04 +0000 (+0000) Subject: clk/qcom: add mnd_width to clk_rcg_set_rate_mnd() X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=6acc44319bba5e4f5bcdacaa6412d617815472ed;p=u-boot.git clk/qcom: add mnd_width to clk_rcg_set_rate_mnd() This property is needed on some platforms to ensure that only the relevant bits are set in the M/N/D registers. Reviewed-by: Sumit Garg Signed-off-by: Caleb Connolly --- diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index 3f44252c45..498e8ef678 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -86,7 +86,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot)); /* 800Mhz/div, gpll0 */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); @@ -109,7 +109,7 @@ static int clk_init_uart(struct msm_clk_priv *priv) /* 7372800 uart block clock @ GPLL0 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(priv->base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index 75633a7c2a..367c0f06ae 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -69,7 +69,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) clk_enable_cbc(priv->base + SDCC2_AHB_CBCR); clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC2_APPS_CBCR); @@ -91,7 +91,7 @@ static int clk_init_uart(struct msm_clk_priv *priv) /* 7372800 uart block clock @ GPLL0 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(priv->base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 77bcaacd15..fc478554f9 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -83,7 +83,7 @@ void clk_bcr_update(phys_addr_t apps_cmd_rcgr) /* root set rate for clocks with half integer and MND divider */ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, - int div, int m, int n, int source) + int div, int m, int n, int source, u8 mnd_width) { u32 cfg; /* M value for MND divider. */ @@ -92,11 +92,14 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, u32 n_val = ~((n) - (m)) * !!(n); /* NOT 2D value for MND divider. */ u32 d_val = ~(n); + u32 mask = BIT(mnd_width) - 1; + + debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask); /* Program MND values */ - writel(m_val, base + regs->M); - writel(n_val, base + regs->N); - writel(d_val, base + regs->D); + writel(m_val & mask, base + regs->M); + writel(n_val & mask, base + regs->N); + writel(d_val & mask, base + regs->D); /* setup src select and divider */ cfg = readl(base + regs->cfg_rcgr); diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 86f9ff6eb2..24a32cb966 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -72,7 +72,7 @@ void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, - int div, int m, int n, int source); + int div, int m, int n, int source, u8 mnd_width); void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, int source); diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index 9ad580b50f..f234ab5d65 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -195,7 +195,7 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) case GCC_BLSP1_UART2_APPS_CLK: /* UART: 115200 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125, - CFG_CLK_SRC_CXO); + CFG_CLK_SRC_CXO, 16); clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); break; case GCC_BLSP1_AHB_CLK: @@ -204,7 +204,7 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) case GCC_SDCC1_APPS_CLK: /* SDCC1: 200MHz */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 4, 0, 0, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1)); break; @@ -214,16 +214,16 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) case GCC_ETH_RGMII_CLK: if (rate == 250000000) clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); else if (rate == 125000000) clk_rcg_set_rate_mnd(priv->base, &emac_regs, 4, 0, 0, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); else if (rate == 50000000) clk_rcg_set_rate_mnd(priv->base, &emac_regs, 10, 0, 0, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); else if (rate == 5000000) clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 1, 50, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); break; default: return 0; @@ -240,7 +240,7 @@ static int qcs404_clk_enable(struct clk *clk) case GCC_USB30_MASTER_CLK: clk_enable_cbc(priv->base + USB30_MASTER_CBCR); clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 4, 0, 0, - CFG_CLK_SRC_GPLL0); + CFG_CLK_SRC_GPLL0, 8); break; case GCC_SYS_NOC_USB3_CLK: clk_enable_cbc(priv->base + SYS_NOC_USB3_CBCR); @@ -262,14 +262,14 @@ static int qcs404_clk_enable(struct clk *clk) clk_enable_cbc(priv->base + ETH_PTP_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 2, 0, 0, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_RGMII_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_RGMII_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0, - CFG_CLK_SRC_GPLL1); + CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_SLAVE_AHB_CLK: clk_enable_cbc(priv->base + ETH_SLAVE_AHB_CBCR); diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index fc9a783f73..6af1f38302 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -89,8 +89,7 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); clk_rcg_set_rate_mnd(priv->base, &uart2_regs, - freq->pre_div, freq->m, freq->n, freq->src); - + freq->pre_div, freq->m, freq->n, freq->src, 16); return freq->freq; default: return 0;