From: Marek Vasut Date: Wed, 25 Mar 2020 16:02:51 +0000 (+0100) Subject: net: ks8851: Use 16bit RXQCR access X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=6a457313642525feacdfea973dbabd639f5b3261;p=u-boot.git net: ks8851: Use 16bit RXQCR access Per KS8851-16MLL, the RXQCR is a 16bit register. Use 16bit accessors to it consistently and drop the ks_wrreg8() function altogether, as it is not used anymore. Signed-off-by: Marek Vasut Cc: Eugen Hristev Cc: Joe Hershberger --- diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 03b8d7c9fd..c1c143dbaa 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -119,15 +119,6 @@ static u16 ks_rdreg16(struct eth_device *dev, u16 offset) return readw(dev->iobase); } -static void ks_wrreg8(struct eth_device *dev, u16 offset, u8 val) -{ - u8 shift_bit = (offset & 0x03); - u16 value_write = (u16)(val << ((offset & 1) << 3)); - - writew(offset | (BE0 << shift_bit), dev->iobase + 2); - writew(value_write, dev->iobase); -} - static void ks_wrreg16(struct eth_device *dev, u16 offset, u16 val) { writew(offset | ((BE1 | BE0) << (offset & 0x02)), dev->iobase + 2); @@ -275,7 +266,7 @@ static inline void ks_read_qmu(struct eth_device *dev, u16 *buf, u32 len) /* 1. set sudo DMA mode */ ks_wrreg16(dev, KS_RXFDPR, RXFDPR_RXFPAI); - ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); /* * 2. read prepend data @@ -293,7 +284,7 @@ static inline void ks_read_qmu(struct eth_device *dev, u16 *buf, u32 len) ks_inblk(dev, buf, ALIGN(len, 4)); /* 4. reset sudo DMA Mode */ - ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL); } static void ks_rcv(struct eth_device *dev, uchar **pv_data) @@ -518,13 +509,13 @@ static void ks_write_qmu(struct eth_device *dev, u8 *pdata, u16 len) /* 1. set sudo-DMA mode */ ks_wrreg16(dev, KS_TXFDPR, TXFDPR_TXFPAI); - ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL | RXQCR_SDA); /* 2. write status/lenth info */ ks_outblk(dev, ks->txh.txw, 4); /* 3. write pkt data */ ks_outblk(dev, (u16 *)pdata, ALIGN(len, 4)); /* 4. reset sudo-DMA mode */ - ks_wrreg8(dev, KS_RXQCR, RXQCR_CMD_CNTL); + ks_wrreg16(dev, KS_RXQCR, RXQCR_CMD_CNTL); /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ ks_wrreg16(dev, KS_TXQCR, TXQCR_METFE); /* 6. wait until TXQCR_METFE is auto-cleared */