From: Philipp Tomsich Date: Fri, 23 Feb 2018 16:38:52 +0000 (+0100) Subject: rockchip: video: rk_vop: migrate to livetree X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=5de0b5a36a173e7fe311951ba115dec569cc0c8d;p=u-boot.git rockchip: video: rk_vop: migrate to livetree This migrates rk_vop (the shared functions used by multiple VOP mini-drivers) to be compatible with a live tree. Unfortunately, there's (i) a lot of tree traversal needed for a VOP (as each active VOP vnode references back to the endpoints in the encoders and vice versa) to configure the connection between VOPs and encoders; (ii) the DTS binding is not too sane and one needs to walk a node's parents (the original code just assumed that the device would live 3 levels above the property linked through a phandle) until a UCLASS_DISPLAY device can be found. As part of the migration, the code for finding the enclosing display device has been changed to not assume a specific depth of nesting (i.e. we walk until we reach the root or find a matching device) and to use the newly introduced (in the same series) ofnode_get_parent() function. Signed-off-by: Philipp Tomsich Tested-by: Klaus Goger Reviewed-by: Anatolij Gustschin --- diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c index c979049b5b..1288608207 100644 --- a/drivers/video/rockchip/rk_vop.c +++ b/drivers/video/rockchip/rk_vop.c @@ -218,41 +218,67 @@ static void rkvop_mode_set(struct udevice *dev, * node within the VOP's 'port' list. * @return 0 if OK, -ve if something went wrong */ -static int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node) +static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node) { struct video_priv *uc_priv = dev_get_uclass_priv(dev); - const void *blob = gd->fdt_blob; struct rk_vop_priv *priv = dev_get_priv(dev); int vop_id, remote_vop_id; struct rk3288_vop *regs = priv->regs; struct display_timing timing; struct udevice *disp; - int ret, remote, i, offset; + int ret; + u32 remote_phandle; struct display_plat *disp_uc_plat; struct clk clk; enum video_log2_bpp l2bpp; + ofnode remote; - vop_id = fdtdec_get_int(blob, ep_node, "reg", -1); + debug("%s(%s, %lu, %s)\n", __func__, + dev_read_name(dev), fbbase, ofnode_get_name(ep_node)); + + vop_id = ofnode_read_s32_default(ep_node, "reg", -1); debug("vop_id=%d\n", vop_id); - remote = fdtdec_lookup_phandle(blob, ep_node, "remote-endpoint"); - if (remote < 0) - return -EINVAL; - remote_vop_id = fdtdec_get_int(blob, remote, "reg", -1); - debug("remote vop_id=%d\n", remote_vop_id); + ret = ofnode_read_u32(ep_node, "remote-endpoint", &remote_phandle); + if (ret) + return ret; - for (i = 0, offset = remote; i < 3 && offset > 0; i++) - offset = fdt_parent_offset(blob, offset); - if (offset < 0) { - debug("%s: Invalid remote-endpoint position\n", dev->name); + remote = ofnode_get_by_phandle(remote_phandle); + if (!ofnode_valid(remote)) return -EINVAL; - } + remote_vop_id = ofnode_read_u32_default(remote, "reg", -1); + debug("remote vop_id=%d\n", remote_vop_id); - ret = uclass_find_device_by_of_offset(UCLASS_DISPLAY, offset, &disp); - if (ret) { - debug("%s: device '%s' display not found (ret=%d)\n", __func__, - dev->name, ret); - return ret; - } + /* + * The remote-endpoint references into a subnode of the encoder + * (i.e. HDMI, MIPI, etc.) with the DTS looking something like + * the following (assume 'hdmi_in_vopl' to be referenced): + * + * hdmi: hdmi@ff940000 { + * ports { + * hdmi_in: port { + * hdmi_in_vopb: endpoint@0 { ... }; + * hdmi_in_vopl: endpoint@1 { ... }; + * } + * } + * } + * + * The original code had 3 steps of "walking the parent", but + * a much better (as in: less likely to break if the DTS + * changes) way of doing this is to "find the enclosing device + * of UCLASS_DISPLAY". + */ + while (ofnode_valid(remote)) { + remote = ofnode_get_parent(remote); + if (!ofnode_valid(remote)) { + debug("%s(%s): no UCLASS_DISPLAY for remote-endpoint\n", + __func__, dev_read_name(dev)); + return -EINVAL; + } + + uclass_find_device_by_ofnode(UCLASS_DISPLAY, remote, &disp); + if (disp) + break; + }; disp_uc_plat = dev_get_uclass_platdata(disp); debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat); @@ -334,16 +360,15 @@ void rk_vop_probe_regulators(struct udevice *dev, int rk_vop_probe(struct udevice *dev) { struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); - const void *blob = gd->fdt_blob; struct rk_vop_priv *priv = dev_get_priv(dev); int ret = 0; - int port, node; + ofnode port, node; /* Before relocation we don't need to do anything */ if (!(gd->flags & GD_FLG_RELOC)) return 0; - priv->regs = (struct rk3288_vop *)devfdt_get_addr(dev); + priv->regs = (struct rk3288_vop *)dev_read_addr(dev); /* * Try all the ports until we find one that works. In practice this @@ -353,12 +378,16 @@ int rk_vop_probe(struct udevice *dev) * clock so it is currently not possible to use more than one display * device simultaneously. */ - port = fdt_subnode_offset(blob, dev_of_offset(dev), "port"); - if (port < 0) + port = dev_read_subnode(dev, "port"); + if (!ofnode_valid(port)) { + debug("%s(%s): 'port' subnode not found\n", + __func__, dev_read_name(dev)); return -EINVAL; - for (node = fdt_first_subnode(blob, port); - node > 0; - node = fdt_next_subnode(blob, node)) { + } + + for (node = ofnode_first_subnode(port); + ofnode_valid(node); + node = dev_read_next_subnode(node)) { ret = rk_display_init(dev, plat->base, node); if (ret) debug("Device failed: ret=%d\n", ret);