From: Bryan O'Donoghue Date: Fri, 12 Jan 2018 12:39:58 +0000 (+0000) Subject: arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=53c8a510e72a87aa1d6eda48c5462b01a215e518;p=u-boot.git arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail The current code disjoins an entire block of code on hab_entry pass/fail resulting in a large chunk of authenticate_image being offset to the right. Fix this by checking hab_entry() pass/failure and exiting the function directly if in an error state. Signed-off-by: Bryan O'Donoghue Cc: Stefano Babic Cc: Fabio Estevam Cc: Peng Fan Cc: Albert Aribaud Cc: Sven Ebenfeld Cc: George McCollister Cc: Breno Matheus Lima Tested-by: Breno Lima Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 6f86c02efb..f878b7bf9d 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -438,75 +438,77 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size) hab_caam_clock_enable(1); - if (hab_rvt_entry() == HAB_SUCCESS) { - /* If not already aligned, Align to ALIGN_SIZE */ - ivt_offset = (image_size + ALIGN_SIZE - 1) & - ~(ALIGN_SIZE - 1); + if (hab_rvt_entry() != HAB_SUCCESS) { + puts("hab entry function fail\n"); + goto hab_caam_clock_disable; + } - start = ddr_start; - bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; + /* If not already aligned, Align to ALIGN_SIZE */ + ivt_offset = (image_size + ALIGN_SIZE - 1) & + ~(ALIGN_SIZE - 1); + + start = ddr_start; + bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; #ifdef DEBUG - printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", - ivt_offset, ddr_start + ivt_offset); - puts("Dumping IVT\n"); - print_buffer(ddr_start + ivt_offset, - (void *)(ddr_start + ivt_offset), - 4, 0x8, 0); - - puts("Dumping CSF Header\n"); - print_buffer(ddr_start + ivt_offset + IVT_SIZE, - (void *)(ddr_start + ivt_offset + IVT_SIZE), - 4, 0x10, 0); + printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", + ivt_offset, ddr_start + ivt_offset); + puts("Dumping IVT\n"); + print_buffer(ddr_start + ivt_offset, + (void *)(ddr_start + ivt_offset), + 4, 0x8, 0); + + puts("Dumping CSF Header\n"); + print_buffer(ddr_start + ivt_offset + IVT_SIZE, + (void *)(ddr_start + ivt_offset + IVT_SIZE), + 4, 0x10, 0); #if !defined(CONFIG_SPL_BUILD) - get_hab_status(); + get_hab_status(); #endif - puts("\nCalling authenticate_image in ROM\n"); - printf("\tivt_offset = 0x%x\n", ivt_offset); - printf("\tstart = 0x%08lx\n", start); - printf("\tbytes = 0x%x\n", bytes); + puts("\nCalling authenticate_image in ROM\n"); + printf("\tivt_offset = 0x%x\n", ivt_offset); + printf("\tstart = 0x%08lx\n", start); + printf("\tbytes = 0x%x\n", bytes); #endif - /* - * If the MMU is enabled, we have to notify the ROM - * code, or it won't flush the caches when needed. - * This is done, by setting the "pu_irom_mmu_enabled" - * word to 1. You can find its address by looking in - * the ROM map. This is critical for - * authenticate_image(). If MMU is enabled, without - * setting this bit, authentication will fail and may - * crash. - */ - /* Check MMU enabled */ - if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { - if (is_mx6dq()) { - /* - * This won't work on Rev 1.0.0 of - * i.MX6Q/D, since their ROM doesn't - * do cache flushes. don't think any - * exist, so we ignore them. - */ - if (!is_mx6dqp()) - writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); - } else if (is_mx6sdl()) { - writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); - } else if (is_mx6sl()) { - writel(1, MX6SL_PU_IROM_MMU_EN_VAR); - } + /* + * If the MMU is enabled, we have to notify the ROM + * code, or it won't flush the caches when needed. + * This is done, by setting the "pu_irom_mmu_enabled" + * word to 1. You can find its address by looking in + * the ROM map. This is critical for + * authenticate_image(). If MMU is enabled, without + * setting this bit, authentication will fail and may + * crash. + */ + /* Check MMU enabled */ + if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { + if (is_mx6dq()) { + /* + * This won't work on Rev 1.0.0 of + * i.MX6Q/D, since their ROM doesn't + * do cache flushes. don't think any + * exist, so we ignore them. + */ + if (!is_mx6dqp()) + writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); + } else if (is_mx6sdl()) { + writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); + } else if (is_mx6sl()) { + writel(1, MX6SL_PU_IROM_MMU_EN_VAR); } + } - load_addr = (uint32_t)hab_rvt_authenticate_image( - HAB_CID_UBOOT, - ivt_offset, (void **)&start, - (size_t *)&bytes, NULL); - if (hab_rvt_exit() != HAB_SUCCESS) { - puts("hab exit function fail\n"); - load_addr = 0; - } - } else { - puts("hab entry function fail\n"); + load_addr = (uint32_t)hab_rvt_authenticate_image( + HAB_CID_UBOOT, + ivt_offset, (void **)&start, + (size_t *)&bytes, NULL); + if (hab_rvt_exit() != HAB_SUCCESS) { + puts("hab exit function fail\n"); + load_addr = 0; } +hab_caam_clock_disable: hab_caam_clock_enable(0); #if !defined(CONFIG_SPL_BUILD)