From: Guillaume La Roque <glaroque@baylibre.com>
Date: Tue, 4 Jun 2019 11:53:07 +0000 (+0200)
Subject: pinctrl: meson: add support of drive-strength-microamp
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=478c563b400e0ddf8438ac57e2ecc1cedd9d072a;p=u-boot.git

pinctrl: meson: add support of drive-strength-microamp

drive-strength-microamp is a new feature needed for G12A SoC.
the default DS setting after boot is usually 500uA and it is not enough for
many functions. We need to be able to set the drive strength to reliably
enable things like MMC, I2C, etc ...

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---

diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
index 10b070ea06..b5d74068c5 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
@@ -142,6 +142,7 @@ const struct pinconf_param meson_axg_pinconf_params[] = {
 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
 	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
 	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
+	{ "drive-strength-microamp", PIN_CONFIG_DRIVE_STRENGTH_UA, 0 },
 };
 
 const struct pinctrl_ops meson_axg_pinctrl_ops = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index eb40a84ed1..f664d76b54 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -222,6 +222,47 @@ static int meson_pinconf_bias_set(struct udevice *dev, unsigned int pin,
 	return 0;
 }
 
+static int meson_pinconf_drive_strength_set(struct udevice *dev,
+					    unsigned int pin,
+					    unsigned int drive_strength_ua)
+{
+	struct meson_pinctrl *priv = dev_get_priv(dev);
+	unsigned int offset = pin - priv->data->pin_base;
+	unsigned int reg, bit;
+	unsigned int ds_val;
+	int ret;
+
+	if (!priv->reg_ds) {
+		dev_err(dev, "drive-strength-microamp not supported\n");
+		return -ENOTSUPP;
+	}
+
+	ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DS, &reg, &bit);
+	if (ret)
+		return ret;
+
+	bit = bit << 1;
+
+	if (drive_strength_ua <= 500) {
+		ds_val = MESON_PINCONF_DRV_500UA;
+	} else if (drive_strength_ua <= 2500) {
+		ds_val = MESON_PINCONF_DRV_2500UA;
+	} else if (drive_strength_ua <= 3000) {
+		ds_val = MESON_PINCONF_DRV_3000UA;
+	} else if (drive_strength_ua <= 4000) {
+		ds_val = MESON_PINCONF_DRV_4000UA;
+	} else {
+		dev_warn(dev,
+			 "pin %u: invalid drive-strength-microamp : %d , default to 4mA\n",
+			 pin, drive_strength_ua);
+		ds_val = MESON_PINCONF_DRV_4000UA;
+	}
+
+	clrsetbits_le32(priv->reg_ds + reg, 0x3 << bit, ds_val << bit);
+
+	return 0;
+}
+
 int meson_pinconf_set(struct udevice *dev, unsigned int pin,
 		      unsigned int param, unsigned int arg)
 {
@@ -233,7 +274,9 @@ int meson_pinconf_set(struct udevice *dev, unsigned int pin,
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		ret = meson_pinconf_bias_set(dev, pin, param);
 		break;
-
+	case PIN_CONFIG_DRIVE_STRENGTH_UA:
+		ret = meson_pinconf_drive_strength_set(dev, pin, arg);
+		break;
 	default:
 		dev_err(dev, "unsupported configuration parameter %u\n", param);
 		return -EINVAL;
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 0882dfe713..98010cdaf9 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -58,6 +58,16 @@ struct meson_reg_desc {
 	unsigned int bit;
 };
 
+/**
+ * enum meson_pinconf_drv - value of drive-strength supported
+ */
+enum meson_pinconf_drv {
+	MESON_PINCONF_DRV_500UA,
+	MESON_PINCONF_DRV_2500UA,
+	MESON_PINCONF_DRV_3000UA,
+	MESON_PINCONF_DRV_4000UA,
+};
+
 /**
  * enum meson_reg_type - type of registers encoded in @meson_reg_desc
  */
@@ -67,6 +77,7 @@ enum meson_reg_type {
 	REG_DIR,
 	REG_OUT,
 	REG_IN,
+	REG_DS,
 	NUM_REG,
 };
 
@@ -99,19 +110,24 @@ struct meson_bank {
 		.num_groups = ARRAY_SIZE(fn ## _groups),		\
 	}
 
-#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib)		\
-	{								\
-		.name	= n,						\
-		.first	= f,						\
-		.last	= l,						\
-		.regs	= {						\
-			[REG_PULLEN]	= { per, peb },			\
-			[REG_PULL]	= { pr, pb },			\
-			[REG_DIR]	= { dr, db },			\
-			[REG_OUT]	= { or, ob },			\
-			[REG_IN]	= { ir, ib },			\
-		},							\
-	 }
+#define BANK_DS(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib, \
+		dsr, dsb)                                                  \
+	{                                                                  \
+		.name = n,                                                 \
+		.first = f,                                                \
+		.last = l,                                                 \
+		.regs = {                                                  \
+		    [REG_PULLEN] = {per, peb},                             \
+		    [REG_PULL] = {pr, pb},                                 \
+		    [REG_DIR] = {dr, db},                                  \
+		    [REG_OUT] = { or, ob},                                 \
+		    [REG_IN] = {ir, ib},                                   \
+		    [REG_DS] = {dsr, dsb},                                 \
+		},                                                         \
+	}
+
+#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+	BANK_DS(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib, 0, 0)
 
 #define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)