From: Sergiu Moga <sergiu.moga@microchip.com>
Date: Wed, 4 Jan 2023 14:04:11 +0000 (+0200)
Subject: ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=445ff8bb5aeec98df356c4a474a54fb42af8c674;p=u-boot.git

ARM: dts: sam9x60_curiosity: Add pinctrl and gpio properties for USB

Add the required pinctrl and gpio properties needed by the USB DT nodes
of the sam9x60_curiosity boards.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---

diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
index 7c5b6ae2b8..d6ae3d648d 100644
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -49,6 +49,13 @@
 						atmel,pins =
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
+
+					usb1 {
+						pinctrl_usb_default: usb_default {
+							atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+									AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+						};
+					};
 			};
 		};
 	};
@@ -89,3 +96,17 @@
 	phy-mode = "rmii";
 	status = "okay";
 };
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 18 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};