From: Jim Liu Date: Mon, 29 Apr 2024 06:38:03 +0000 (+0800) Subject: crypto: nuvoton: npcm_sha: Support SHA 384/512 X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=3a9f642ca94;p=u-boot.git crypto: nuvoton: npcm_sha: Support SHA 384/512 1. Use vendor naming rule to rename each function 2. add SHA 384/512 support Signed-off-by: Jim Liu --- diff --git a/drivers/crypto/nuvoton/npcm_sha.c b/drivers/crypto/nuvoton/npcm_sha.c index f06be86ca5..6da162069a 100644 --- a/drivers/crypto/nuvoton/npcm_sha.c +++ b/drivers/crypto/nuvoton/npcm_sha.c @@ -1,867 +1,344 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (c) 2022 Nuvoton Technology Corp. + * Copyright (c) 2024 Nuvoton Technology Corp. */ #include #include #include -#include #include +#include -#define HASH_DIG_H_NUM 8 +#define SHA512_BLOCK_LENGTH (1024 / 8) +/* Register fields */ #define HASH_CTR_STS_SHA_EN BIT(0) #define HASH_CTR_STS_SHA_BUSY BIT(1) #define HASH_CTR_STS_SHA_RST BIT(2) #define HASH_CFG_SHA1_SHA2 BIT(0) - -/* SHA type */ -enum npcm_sha_type { - npcm_sha_type_sha2 = 0, - npcm_sha_type_sha1, - npcm_sha_type_num +#define SHA512_CMD_SHA_512 BIT(3) +#define SHA512_CMD_INTERNAL_ROUND BIT(2) +#define SHA512_CMD_WRITE BIT(1) +#define SHA512_CMD_READ BIT(0) + +enum { + type_sha1 = 0, + type_sha256, + type_sha384, + type_sha512, }; struct npcm_sha_regs { - unsigned int hash_data_in; - unsigned char hash_ctr_sts; - unsigned char reserved_0[0x03]; - unsigned char hash_cfg; - unsigned char reserved_1[0x03]; - unsigned char hash_ver; - unsigned char reserved_2[0x13]; - unsigned int hash_dig[HASH_DIG_H_NUM]; + u8 data_in; + u8 data_out; + u8 ctr_sts; + u8 hash_cfg; + u8 sha512_cmd; }; -struct npcm_sha_priv { - struct npcm_sha_regs *regs; +struct hash_info { + u32 block_sz; + u32 digest_len; + u8 length_bytes; + u8 type; }; -static struct npcm_sha_priv *sha_priv; +struct message_block { + u64 length[2]; + u64 nonhash_sz; + u8 buffer[SHA512_BLOCK_LENGTH * 2]; +}; -#ifdef SHA_DEBUG_MODULE -#define sha_print(fmt, args...) printf(fmt, ##args) -#else -#define sha_print(fmt, args...) (void)0 -#endif - -#define SHA_BLOCK_LENGTH (512 / 8) -#define SHA_2_HASH_LENGTH (256 / 8) -#define SHA_1_HASH_LENGTH (160 / 8) -#define SHA_HASH_LENGTH(type) ((type == npcm_sha_type_sha2) ? \ - (SHA_2_HASH_LENGTH) : (SHA_1_HASH_LENGTH)) - -#define SHA_SECRUN_BUFF_SIZE 64 -#define SHA_TIMEOUT 100 -#define SHA_DATA_LAST_BYTE 0x80 - -#define SHA2_NUM_OF_SELF_TESTS 3 -#define SHA1_NUM_OF_SELF_TESTS 4 - -#define NUVOTON_ALIGNMENT 4 - -/*-----------------------------------------------------------------------------*/ -/* SHA instance struct handler */ -/*-----------------------------------------------------------------------------*/ -struct SHA_HANDLE_T { - u32 hv[SHA_2_HASH_LENGTH / sizeof(u32)]; - u32 length0; - u32 length1; - u32 block[SHA_BLOCK_LENGTH / sizeof(u32)]; - u8 type; - bool active; +struct npcm_sha_priv { + void *base; + struct npcm_sha_regs *regs; + struct hash_info *hash; + struct message_block block; + bool internal_round; + bool support_sha512; }; -// The # of bytes currently in the sha block buffer -#define SHA_BUFF_POS(length) ((length) & (SHA_BLOCK_LENGTH - 1)) - -// The # of free bytes in the sha block buffer -#define SHA_BUFF_FREE(length) (SHA_BLOCK_LENGTH - SHA_BUFF_POS(length)) - -static void SHA_FlushLocalBuffer_l(const u32 *buff); -static int SHA_BusyWait_l(void); -static void SHA_GetShaDigest_l(u8 *hashdigest, u8 type); -static void SHA_SetShaDigest_l(const u32 *hashdigest, u8 type); -static void SHA_SetBlock_l(const u8 *data, u32 len, u16 position, u32 *block); -static void SHA_ClearBlock_l(u16 len, u16 position, u32 *block); -static void SHA_SetLength32_l(struct SHA_HANDLE_T *handleptr, u32 *block); - -static int SHA_Init(struct SHA_HANDLE_T *handleptr); -static int SHA_Start(struct SHA_HANDLE_T *handleptr, u8 type); -static int SHA_Update(struct SHA_HANDLE_T *handleptr, const u8 *buffer, u32 len); -static int SHA_Finish(struct SHA_HANDLE_T *handleptr, u8 *hashdigest); -static int SHA_Reset(void); -static int SHA_Power(bool on); -#ifdef SHA_PRINT -static void SHA_PrintRegs(void); -static void SHA_PrintVersion(void); -#endif - -static struct SHA_HANDLE_T sha_handle; - -/*----------------------------------------------------------------------------*/ -/* Checks if give function returns int error, and returns the error */ -/* immediately after SHA disabling */ -/*----------------------------------------------------------------------------*/ -int npcm_sha_check(int status) -{ - if (status != 0) { - SHA_Power(false); - return status; - } - return 0; -} +static struct npcm_sha_regs npcm_sha_reg_tbl[] = { + { .data_in = 0x0, .data_out = 0x20, .ctr_sts = 0x4, .hash_cfg = 0x8 }, + { .data_in = 0x10, .data_out = 0x1c, .ctr_sts = 0x14, .sha512_cmd = 0x18 }, +}; -/*----------------------------------------------------------------------------*/ -/* Function: npcm_sha_calc */ -/* */ -/* Parameters: type - SHA module type */ -/* inBuff - Pointer to a buffer containing the data to */ -/* be hashed */ -/* len - Length of the data to hash */ -/* hashDigest - Pointer to a buffer where the reseulting */ -/* digest will be copied to */ -/* */ -/* Returns: 0 on success or other int error code on error */ -/* Side effects: */ -/* Description: */ -/* This routine performs complete SHA calculation in one */ -/* step */ -/*----------------------------------------------------------------------------*/ -int npcm_sha_calc(u8 type, const u8 *inbuff, u32 len, u8 *hashdigest) -{ - int status; - struct SHA_HANDLE_T handle; - - SHA_Init(&handle); - SHA_Power(true); - SHA_Reset(); - SHA_Start(&handle, type); - status = SHA_Update(&handle, inbuff, len); - npcm_sha_check(status); - status = SHA_Finish(&handle, hashdigest); - npcm_sha_check(status); - SHA_Power(false); +static struct hash_info npcm_hash_tbl[] = { + { .type = type_sha1, .block_sz = 64, .digest_len = 160, .length_bytes = 8 }, + { .type = type_sha256, .block_sz = 64, .digest_len = 256, .length_bytes = 8 }, + { .type = type_sha384, .block_sz = 128, .digest_len = 384, .length_bytes = 16 }, + { .type = type_sha512, .block_sz = 128, .digest_len = 512, .length_bytes = 16 }, +}; - return 0; -} +static struct npcm_sha_priv *sha_priv; -/* - * Computes hash value of input pbuf using h/w acceleration - * - * @param in_addr A pointer to the input buffer - * @param bufleni Byte length of input buffer - * @param out_addr A pointer to the output buffer. When complete - * 32 bytes are copied to pout[0]...pout[31]. Thus, a user - * should allocate at least 32 bytes at pOut in advance. - * @param chunk_size chunk size for sha256 - */ -void hw_sha256(const uchar *in_addr, uint buflen, uchar *out_addr, uint chunk_size) +static int npcm_sha_init(u8 type) { - puts("\nhw_sha256 using BMC HW accelerator\t"); - npcm_sha_calc(npcm_sha_type_sha2, (u8 *)in_addr, buflen, (u8 *)out_addr); -} + struct message_block *block = &sha_priv->block; -/* - * Computes hash value of input pbuf using h/w acceleration - * - * @param in_addr A pointer to the input buffer - * @param bufleni Byte length of input buffer - * @param out_addr A pointer to the output buffer. When complete - * 32 bytes are copied to pout[0]...pout[31]. Thus, a user - * should allocate at least 32 bytes at pOut in advance. - * @param chunk_size chunk_size for sha1 - */ -void hw_sha1(const uchar *in_addr, uint buflen, uchar *out_addr, uint chunk_size) -{ - puts("\nhw_sha1 using BMC HW accelerator\t"); - npcm_sha_calc(npcm_sha_type_sha1, (u8 *)in_addr, buflen, (u8 *)out_addr); -} + if (type > type_sha512 || + (!sha_priv->support_sha512 && + (type == type_sha384 || type == type_sha512))) + return -ENOTSUPP; -/* - * Create the context for sha progressive hashing using h/w acceleration - * - * @algo: Pointer to the hash_algo struct - * @ctxp: Pointer to the pointer of the context for hashing - * @return 0 if ok, -ve on error - */ -int hw_sha_init(struct hash_algo *algo, void **ctxp) -{ - const char *algo_name1 = "sha1"; - const char *algo_name2 = "sha256"; - - SHA_Init(&sha_handle); - SHA_Power(true); - SHA_Reset(); - if (!strcmp(algo_name1, algo->name)) - return SHA_Start(&sha_handle, npcm_sha_type_sha1); - else if (!strcmp(algo_name2, algo->name)) - return SHA_Start(&sha_handle, npcm_sha_type_sha2); - else - return -EPROTO; -} + sha_priv->regs = &npcm_sha_reg_tbl[type / 2]; + sha_priv->hash = &npcm_hash_tbl[type]; + block->length[0] = 0; + block->length[1] = 0; + block->nonhash_sz = 0; + sha_priv->internal_round = false; -/* - * Update buffer for sha progressive hashing using h/w acceleration - * - * The context is freed by this function if an error occurs. - * - * @algo: Pointer to the hash_algo struct - * @ctx: Pointer to the context for hashing - * @buf: Pointer to the buffer being hashed - * @size: Size of the buffer being hashed - * @is_last: 1 if this is the last update; 0 otherwise - * @return 0 if ok, -ve on error - */ -int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, - unsigned int size, int is_last) -{ - return SHA_Update(&sha_handle, buf, size); + return 0; } -/* - * Copy sha hash result at destination location - * - * The context is freed after completion of hash operation or after an error. - * - * @algo: Pointer to the hash_algo struct - * @ctx: Pointer to the context for hashing - * @dest_buf: Pointer to the destination buffer where hash is to be copied - * @size: Size of the buffer being hashed - * @return 0 if ok, -ve on error - */ -int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, int size) +static void npcm_sha_reset(void) { - int status; - - status = SHA_Finish(&sha_handle, dest_buf); - npcm_sha_check(status); - return SHA_Power(false); + struct npcm_sha_regs *regs = sha_priv->regs; + struct hash_info *hash = sha_priv->hash; + u8 val; + + if (hash->type == type_sha1) + writeb(HASH_CFG_SHA1_SHA2, sha_priv->base + regs->hash_cfg); + else if (hash->type == type_sha256) + writeb(0, sha_priv->base + regs->hash_cfg); + else if (hash->type == type_sha384) + writeb(0, sha_priv->base + regs->sha512_cmd); + else if (hash->type == type_sha512) + writeb(SHA512_CMD_SHA_512, sha_priv->base + regs->sha512_cmd); + + val = readb(sha_priv->base + regs->ctr_sts) & ~HASH_CTR_STS_SHA_EN; + writeb(val | HASH_CTR_STS_SHA_RST, sha_priv->base + regs->ctr_sts); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Init */ -/* */ -/* Parameters: handlePtr - SHA processing handle pointer */ -/* Returns: 0 on success or other int error code on error. */ -/* Side effects: */ -/* Description: */ -/* This routine initialize the SHA module */ -/*----------------------------------------------------------------------------*/ -static int SHA_Init(struct SHA_HANDLE_T *handleptr) +static void npcm_sha_enable(bool on) { - handleptr->active = false; + struct npcm_sha_regs *regs = sha_priv->regs; + u8 val; - return 0; + val = readb(sha_priv->base + regs->ctr_sts) & ~HASH_CTR_STS_SHA_EN; + val |= on; + writeb(val | on, sha_priv->base + regs->ctr_sts); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Start */ -/* */ -/* Parameters: handlePtr - SHA processing handle pointer */ -/* type - SHA module type */ -/* */ -/* Returns: 0 on success or other int error code on error. */ -/* Side effects: */ -/* Description: */ -/* This routine start a single SHA process */ -/*----------------------------------------------------------------------------*/ -static int SHA_Start(struct SHA_HANDLE_T *handleptr, u8 type) +static int npcm_sha_flush_block(u8 *block) { struct npcm_sha_regs *regs = sha_priv->regs; + struct hash_info *hash = sha_priv->hash; + u32 *blk_dw = (u32 *)block; + u8 val; + int i; + + if (readb_poll_timeout(sha_priv->base + regs->ctr_sts, val, + !(val & HASH_CTR_STS_SHA_BUSY), 100)) + return -ETIMEDOUT; + + if (hash->type == type_sha384 || hash->type == type_sha512) { + val = SHA512_CMD_WRITE; + if (hash->type == type_sha512) + val |= SHA512_CMD_SHA_512; + if (sha_priv->internal_round) + val |= SHA512_CMD_INTERNAL_ROUND; + writeb(val, sha_priv->base + regs->sha512_cmd); + } + for (i = 0; i < (hash->block_sz / sizeof(u32)); i++) + writel(blk_dw[i], sha_priv->base + regs->data_in); - // Initialize handle - handleptr->length0 = 0; - handleptr->length1 = 0; - handleptr->type = type; - handleptr->active = true; - - // Set SHA type - writeb(handleptr->type & HASH_CFG_SHA1_SHA2, ®s->hash_cfg); - - // Reset SHA hardware - SHA_Reset(); - - /* The handlePtr->hv is initialized with the correct IV as the SHA engine - * automatically fill the HASH_DIG_Hn registers according to SHA spec - * (following SHA_RST assertion) - */ - SHA_GetShaDigest_l((u8 *)handleptr->hv, type); - - // Init block with zeros - memset(handleptr->block, 0, sizeof(handleptr->block)); + sha_priv->internal_round = true; return 0; } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Update */ -/* */ -/* Parameters: handlePtr - SHA processing handle pointer */ -/* buffer - Pointer to the data that will be added to */ -/* the hash calculation */ -/* len - Length of data to add to SHA calculation */ -/* */ -/* */ -/* Returns: 0 on success or other int error code on error */ -/* Side effects: */ -/* Description: */ -/* This routine adds data to previously started SHA */ -/* calculation */ -/*----------------------------------------------------------------------------*/ -static int SHA_Update(struct SHA_HANDLE_T *handleptr, const u8 *buffer, u32 len) +static int npcm_sha_update_block(const u8 *in, u32 len) { - struct npcm_sha_regs *regs = sha_priv->regs; - u32 localbuffer[SHA_SECRUN_BUFF_SIZE / sizeof(u32)]; - u32 bufferlen = len; - u16 pos = 0; - u8 *blockptr; - int status; - - // Error check - if (!handleptr->active) - return -EPROTO; - - // Wait till SHA is not busy - status = SHA_BusyWait_l(); - npcm_sha_check(status); - - // Set SHA type - writeb(handleptr->type & HASH_CFG_SHA1_SHA2, ®s->hash_cfg); - - // Write SHA latest digest into SHA module - SHA_SetShaDigest_l(handleptr->hv, handleptr->type); - - // Set number of unhashed bytes which remained from last update - pos = SHA_BUFF_POS(handleptr->length0); - - // Copy unhashed bytes which remained from last update to secrun buffer - SHA_SetBlock_l((u8 *)handleptr->block, pos, 0, localbuffer); - - while (len) { - // Wait for the hardware to be available (in case we are hashing) - status = SHA_BusyWait_l(); - npcm_sha_check(status); - - // Move as much bytes as we can into the secrun buffer - bufferlen = min(len, SHA_BUFF_FREE(handleptr->length0)); - - // Copy current given buffer to the secrun buffer - SHA_SetBlock_l((u8 *)buffer, bufferlen, pos, localbuffer); - - // Update size of hashed bytes - handleptr->length0 += bufferlen; - - if (handleptr->length0 < bufferlen) - handleptr->length1++; - - // Update length of data left to digest - len -= bufferlen; - - // Update given buffer pointer - buffer += bufferlen; - - // If secrun buffer is full - if (SHA_BUFF_POS(handleptr->length0) == 0) { - /* We just filled up the buffer perfectly, so let it hash (we'll - * unload the hash only when we are done with all hashing) - */ - SHA_FlushLocalBuffer_l(localbuffer); - - pos = 0; - bufferlen = 0; - } + struct message_block *block = &sha_priv->block; + struct hash_info *hash = sha_priv->hash; + u8 *buffer = &block->buffer[0]; + u32 block_sz = hash->block_sz; + u32 hash_sz; + + hash_sz = (block->nonhash_sz + len) > block_sz ? + (block_sz - block->nonhash_sz) : len; + memcpy(buffer + block->nonhash_sz, in, hash_sz); + block->nonhash_sz += hash_sz; + block->length[0] += hash_sz; + if (block->length[0] < hash_sz) + block->length[1]++; + + if (block->nonhash_sz == block_sz) { + block->nonhash_sz = 0; + if (npcm_sha_flush_block(buffer)) + return -EBUSY; } - // Wait till SHA is not busy - status = SHA_BusyWait_l(); - npcm_sha_check(status); - - /* Copy unhashed bytes from given buffer to handle block for next update/finish */ - blockptr = (u8 *)handleptr->block; - while (bufferlen) - blockptr[--bufferlen + pos] = *(--buffer); - - // Save SHA current digest - SHA_GetShaDigest_l((u8 *)handleptr->hv, handleptr->type); - - return 0; + return hash_sz; } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Finish */ -/* */ -/* Parameters: handlePtr - SHA processing handle pointer */ -/* hashDigest - Pointer to a buffer where the final digest */ -/* will be copied to */ -/* */ -/* Returns: 0 on success or other int error code on error */ -/* Side effects: */ -/* Description: */ -/* This routine finish SHA calculation and get */ -/* the resulting SHA digest */ -/*----------------------------------------------------------------------------*/ -static int SHA_Finish(struct SHA_HANDLE_T *handleptr, u8 *hashdigest) +static int npcm_sha_update(const u8 *input, u32 len) { - struct npcm_sha_regs *regs = sha_priv->regs; - u32 localbuffer[SHA_SECRUN_BUFF_SIZE / sizeof(u32)]; - const u8 lastbyte = SHA_DATA_LAST_BYTE; - u16 pos; - int status; - - // Error check - if (!handleptr->active) - return -EPROTO; - - // Set SHA type - writeb(handleptr->type & HASH_CFG_SHA1_SHA2, ®s->hash_cfg); - - // Wait till SHA is not busy - status = SHA_BusyWait_l(); - npcm_sha_check(status); - - // Finish off the current buffer with the SHA spec'ed padding - pos = SHA_BUFF_POS(handleptr->length0); - - // Init SHA digest - SHA_SetShaDigest_l(handleptr->hv, handleptr->type); - - // Load data into secrun buffer - SHA_SetBlock_l((u8 *)handleptr->block, pos, 0, localbuffer); - - // Set data last byte as in SHA algorithm spec - SHA_SetBlock_l(&lastbyte, 1, pos++, localbuffer); + int hash_sz; - // If the remainder of data is longer then one block - if (pos > (SHA_BLOCK_LENGTH - 8)) { - /* The length will be in the next block Pad the rest of the last block with 0's */ - SHA_ClearBlock_l((SHA_BLOCK_LENGTH - pos), pos, localbuffer); - - // Hash the current block - SHA_FlushLocalBuffer_l(localbuffer); - - pos = 0; - - // Wait till SHA is not busy - status = SHA_BusyWait_l(); - npcm_sha_check(status); + while (len) { + hash_sz = npcm_sha_update_block(input, len); + if (hash_sz < 0) { + printf("SHA512 module busy\n"); + return -EBUSY; + } + len -= hash_sz; + input += hash_sz; } - // Pad the rest of the last block with 0's except for the last 8-3 bytes - SHA_ClearBlock_l((SHA_BLOCK_LENGTH - (8 - 3)) - pos, pos, localbuffer); - - /* The last 8-3 bytes are set to the bit-length of the message in big-endian form */ - SHA_SetLength32_l(handleptr, localbuffer); - - // Hash all that, and save the hash for the caller - SHA_FlushLocalBuffer_l(localbuffer); - - // Wait till SHA is not busy - status = SHA_BusyWait_l(); - npcm_sha_check(status); - - // Save SHA final digest into given buffer - SHA_GetShaDigest_l(hashdigest, handleptr->type); - - // Free handle - handleptr->active = false; - return 0; } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Reset */ -/* */ -/* Parameters: none */ -/* Returns: none */ -/* Side effects: */ -/* Description: */ -/* This routine reset SHA module */ -/*----------------------------------------------------------------------------*/ -static int SHA_Reset(void) +static int npcm_sha_finish(u8 *out) { struct npcm_sha_regs *regs = sha_priv->regs; - - writel(readl(®s->hash_ctr_sts) | HASH_CTR_STS_SHA_RST, ®s->hash_ctr_sts); + struct message_block *block = &sha_priv->block; + struct hash_info *hash = sha_priv->hash; + u8 *buffer = &block->buffer[0]; + u32 block_sz = hash->block_sz; + u32 *out32 = (u32 *)out; + u32 zero_len, val; + u64 *length; + u8 reg_data_out; + int i; + + /* Padding, minimal padding size is last_byte+length_bytes */ + if ((block_sz - block->nonhash_sz) >= (hash->length_bytes + 1)) + zero_len = block_sz - block->nonhash_sz - (hash->length_bytes + 1); + else + zero_len = block_sz * 2 - block->nonhash_sz - (hash->length_bytes + 1); + /* Last byte */ + buffer[block->nonhash_sz++] = 0x80; + /* Zero bits padding */ + memset(&buffer[block->nonhash_sz], 0, zero_len); + block->nonhash_sz += zero_len; + /* Message length */ + length = (u64 *)&buffer[block->nonhash_sz]; + if (hash->length_bytes == 16) { + *length++ = cpu_to_be64(block->length[1] << 3 | block->length[0] >> 61); + block->nonhash_sz += 8; + } + *length = cpu_to_be64(block->length[0] << 3); + block->nonhash_sz += 8; + if (npcm_sha_flush_block(&block->buffer[0])) + return -ETIMEDOUT; + + /* After padding, the last message may produce 2 blocks */ + if (block->nonhash_sz > block_sz) { + if (npcm_sha_flush_block(&block->buffer[block_sz])) + return -ETIMEDOUT; + } + /* Read digest */ + if (readb_poll_timeout(sha_priv->base + regs->ctr_sts, val, + !(val & HASH_CTR_STS_SHA_BUSY), 100)) + return -ETIMEDOUT; + if (hash->type == type_sha384) + writeb(SHA512_CMD_READ, sha_priv->base + regs->sha512_cmd); + else if (hash->type == type_sha512) + writeb(SHA512_CMD_SHA_512 | SHA512_CMD_READ, + sha_priv->base + regs->sha512_cmd); + + reg_data_out = regs->data_out; + for (i = 0; i < (hash->digest_len / 32); i++) { + *out32 = readl(sha_priv->base + reg_data_out); + out32++; + if (hash->type == type_sha1 || hash->type == type_sha256) + reg_data_out += 4; + } return 0; } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_Power */ -/* */ -/* Parameters: on - true enable the module, false disable the module */ -/* Returns: none */ -/* Side effects: */ -/* Description: */ -/* This routine set SHA module power on/off */ -/*----------------------------------------------------------------------------*/ -static int SHA_Power(bool on) +int npcm_sha_calc(const u8 *input, u32 len, u8 *output, u8 type) { - struct npcm_sha_regs *regs = sha_priv->regs; - u8 hash_sts; - - hash_sts = readb(®s->hash_ctr_sts) & ~HASH_CTR_STS_SHA_EN; - writeb(hash_sts | (on & HASH_CTR_STS_SHA_EN), ®s->hash_ctr_sts); + if (npcm_sha_init(type)) + return -ENOTSUPP; + npcm_sha_reset(); + npcm_sha_enable(true); + npcm_sha_update(input, len); + npcm_sha_finish(output); + npcm_sha_enable(false); return 0; } -#ifdef SHA_PRINT -/*----------------------------------------------------------------------------*/ -/* Function: SHA_PrintRegs */ -/* */ -/* Parameters: none */ -/* Returns: none */ -/* Side effects: */ -/* Description: */ -/* This routine prints the module registers */ -/*----------------------------------------------------------------------------*/ -static void SHA_PrintRegs(void) +void hw_sha512(const unsigned char *input, unsigned int len, + unsigned char *output, unsigned int chunk_sz) { -#ifdef SHA_DEBUG_MODULE - struct npcm_sha_regs *regs = sha_priv->regs; -#endif - unsigned int i; - - sha_print("/*--------------*/\n"); - sha_print("/* SHA */\n"); - sha_print("/*--------------*/\n\n"); - - sha_print("HASH_CTR_STS = 0x%02X\n", readb(®s->hash_ctr_sts)); - sha_print("HASH_CFG = 0x%02X\n", readb(®s->hash_cfg)); - - for (i = 0; i < HASH_DIG_H_NUM; i++) - sha_print("HASH_DIG_H%d = 0x%08X\n", i, readl(®s->hash_dig[i])); - - sha_print("HASH_VER = 0x%08X\n", readb(®s->hash_ver)); - - sha_print("\n"); + if (!sha_priv->support_sha512) { + puts(" HW accelerator not support\n"); + return; + } + puts(" using BMC HW accelerator\n"); + npcm_sha_calc(input, len, output, type_sha512); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_PrintVersion */ -/* */ -/* Parameters: none */ -/* Returns: none */ -/* Side effects: */ -/* Description: */ -/* This routine prints the module version */ -/*----------------------------------------------------------------------------*/ -static void SHA_PrintVersion(void) -{ - struct npcm_sha_regs *regs = sha_priv->regs; - - printf("SHA MODULE VER = %d\n", readb(®s->hash_ver)); -} -#endif - -/*----------------------------------------------------------------------------*/ -/* Function: npcm_sha_selftest */ -/* */ -/* Parameters: type - SHA module type */ -/* Returns: 0 on success or other int error code on error */ -/* Side effects: */ -/* Description: */ -/* This routine performs various tests on the SHA HW and SW */ -/*----------------------------------------------------------------------------*/ -int npcm_sha_selftest(u8 type) +void hw_sha384(const unsigned char *input, unsigned int len, + unsigned char *output, unsigned int chunk_sz) { - int status; - struct SHA_HANDLE_T handle; - u8 hashdigest[max(SHA_1_HASH_LENGTH, SHA_2_HASH_LENGTH)]; - u16 i, j; - - /*------------------------------------------------------------------------*/ - /* SHA1 tests info */ - /*------------------------------------------------------------------------*/ - - static const u8 sha1selftestbuff[SHA1_NUM_OF_SELF_TESTS][94] = { - {"abc"}, - {"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq"}, - {"0123456789012345678901234567890123456789012345678901234567890123"}, - {0x30, 0x5c, 0x30, 0x2c, 0x02, 0x01, 0x00, 0x30, 0x09, 0x06, 0x05, 0x2b, - 0x0e, 0x03, 0x02, 0x1a, 0x05, 0x00, 0x30, 0x06, 0x06, 0x04, 0x67, 0x2a, - 0x01, 0x0c, 0x04, 0x14, 0xe1, 0xb6, 0x93, 0xfe, 0x33, 0x43, 0xc1, 0x20, - 0x5d, 0x4b, 0xaa, 0xb8, 0x63, 0xfb, 0xcf, 0x6c, 0x46, 0x1e, 0x88, 0x04, - 0x30, 0x2c, 0x02, 0x01, 0x00, 0x30, 0x09, 0x06, 0x05, 0x2b, 0x0e, 0x03, - 0x02, 0x1a, 0x05, 0x00, 0x30, 0x06, 0x06, 0x04, 0x67, 0x2a, 0x01, 0x0c, - 0x04, 0x14, 0x13, 0xc1, 0x0c, 0xfc, 0xc8, 0x92, 0xd7, 0xde, 0x07, 0x1c, - 0x40, 0xde, 0x4f, 0xcd, 0x07, 0x5b, 0x68, 0x20, 0x5a, 0x6c} - }; - - static const u8 sha1selftestbufflen[SHA1_NUM_OF_SELF_TESTS] = { - 3, 56, 64, 94 - }; - - static const u8 sha1selftestexpres[SHA1_NUM_OF_SELF_TESTS][SHA_1_HASH_LENGTH] = { - {0xA9, 0x99, 0x3E, 0x36, - 0x47, 0x06, 0x81, 0x6A, - 0xBA, 0x3E, 0x25, 0x71, - 0x78, 0x50, 0xC2, 0x6C, - 0x9C, 0xD0, 0xD8, 0x9D}, - {0x84, 0x98, 0x3E, 0x44, - 0x1C, 0x3B, 0xD2, 0x6E, - 0xBA, 0xAE, 0x4A, 0xA1, - 0xF9, 0x51, 0x29, 0xE5, - 0xE5, 0x46, 0x70, 0xF1}, - {0xCF, 0x08, 0x00, 0xF7, - 0x64, 0x4A, 0xCE, 0x3C, - 0xB4, 0xC3, 0xFA, 0x33, - 0x38, 0x8D, 0x3B, 0xA0, - 0xEA, 0x3C, 0x8B, 0x6E}, - {0xc9, 0x84, 0x45, 0xc8, - 0x64, 0x04, 0xb1, 0xe3, - 0x3c, 0x6b, 0x0a, 0x8c, - 0x8b, 0x80, 0x94, 0xfc, - 0xf3, 0xc9, 0x98, 0xab} - }; - - /*------------------------------------------------------------------------*/ - /* SHA2 tests info */ - /*------------------------------------------------------------------------*/ - - static const u8 sha2selftestbuff[SHA2_NUM_OF_SELF_TESTS][100] = { - { "abc" }, - { "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" }, - {'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', - 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a', 'a'} - }; - - static const u8 sha2selftestbufflen[SHA2_NUM_OF_SELF_TESTS] = { - 3, 56, 100 - }; - - static const u8 sha2selftestexpres[SHA2_NUM_OF_SELF_TESTS][SHA_2_HASH_LENGTH] = { - /* - * SHA-256 test vectors - */ - { 0xBA, 0x78, 0x16, 0xBF, 0x8F, 0x01, 0xCF, 0xEA, - 0x41, 0x41, 0x40, 0xDE, 0x5D, 0xAE, 0x22, 0x23, - 0xB0, 0x03, 0x61, 0xA3, 0x96, 0x17, 0x7A, 0x9C, - 0xB4, 0x10, 0xFF, 0x61, 0xF2, 0x00, 0x15, 0xAD }, - { 0x24, 0x8D, 0x6A, 0x61, 0xD2, 0x06, 0x38, 0xB8, - 0xE5, 0xC0, 0x26, 0x93, 0x0C, 0x3E, 0x60, 0x39, - 0xA3, 0x3C, 0xE4, 0x59, 0x64, 0xFF, 0x21, 0x67, - 0xF6, 0xEC, 0xED, 0xD4, 0x19, 0xDB, 0x06, 0xC1 }, - { 0xCD, 0xC7, 0x6E, 0x5C, 0x99, 0x14, 0xFB, 0x92, - 0x81, 0xA1, 0xC7, 0xE2, 0x84, 0xD7, 0x3E, 0x67, - 0xF1, 0x80, 0x9A, 0x48, 0xA4, 0x97, 0x20, 0x0E, - 0x04, 0x6D, 0x39, 0xCC, 0xC7, 0x11, 0x2C, 0xD0 }, - }; - - if (type == npcm_sha_type_sha1) { - /*--------------------------------------------------------------------*/ - /* SHA 1 TESTS */ - /*--------------------------------------------------------------------*/ - for (i = 0; i < SHA1_NUM_OF_SELF_TESTS; i++) { - if (i != 3) { - status = npcm_sha_calc(npcm_sha_type_sha1, sha1selftestbuff[i], sha1selftestbufflen[i], hashdigest); - npcm_sha_check(status); - } else { - SHA_Power(true); - SHA_Reset(); - status = SHA_Start(&handle, npcm_sha_type_sha1); - npcm_sha_check(status); - status = SHA_Update(&handle, sha1selftestbuff[i], 73); - npcm_sha_check(status); - status = SHA_Update(&handle, &sha1selftestbuff[i][73], sha1selftestbufflen[i] - 73); - npcm_sha_check(status); - status = SHA_Finish(&handle, hashdigest); - npcm_sha_check(status); - SHA_Power(false); - } - - if (memcmp(hashdigest, sha1selftestexpres[i], SHA_1_HASH_LENGTH)) - return -1; - } - - } else { - /*--------------------------------------------------------------------*/ - /* SHA 2 TESTS */ - /*--------------------------------------------------------------------*/ - for (i = 0; i < SHA2_NUM_OF_SELF_TESTS; i++) { - SHA_Power(true); - SHA_Reset(); - status = SHA_Start(&handle, npcm_sha_type_sha2); - npcm_sha_check(status); - if (i == 2) { - for (j = 0; j < 10000; j++) { //not working - status = SHA_Update(&handle, sha2selftestbuff[i], sha2selftestbufflen[i]); - npcm_sha_check(status); - } - } else { - status = SHA_Update(&handle, sha2selftestbuff[i], sha2selftestbufflen[i]); - npcm_sha_check(status); - } - - status = SHA_Finish(&handle, hashdigest); - npcm_sha_check(status); - SHA_Power(false); - if (memcmp(hashdigest, sha2selftestexpres[i], SHA_2_HASH_LENGTH)) - return -1; - - npcm_sha_calc(npcm_sha_type_sha2, sha2selftestbuff[i], sha2selftestbufflen[i], hashdigest); - if (memcmp(hashdigest, sha2selftestexpres[i], SHA_2_HASH_LENGTH)) - return -1; - } + if (!sha_priv->support_sha512) { + puts(" HW accelerator not support\n"); + return; } - - return 0; + puts(" using BMC HW accelerator\n"); + npcm_sha_calc(input, len, output, type_sha384); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_FlushLocalBuffer_l */ -/* */ -/* Parameters: */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine flush secrun buffer to SHA module */ -/*----------------------------------------------------------------------------*/ -static void SHA_FlushLocalBuffer_l(const u32 *buff) +void hw_sha256(const unsigned char *input, unsigned int len, + unsigned char *output, unsigned int chunk_sz) { - struct npcm_sha_regs *regs = sha_priv->regs; - u32 i; - - for (i = 0; i < (SHA_BLOCK_LENGTH / sizeof(u32)); i++) - writel(buff[i], ®s->hash_data_in); + puts(" using BMC HW accelerator\n"); + npcm_sha_calc(input, len, output, type_sha256); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_BusyWait_l */ -/* */ -/* Parameters: */ -/* Returns: 0 if no error was found or DEFS_STATUS_ERROR otherwise */ -/* Side effects: */ -/* Description: This routine wait for SHA unit to no longer be busy */ -/*----------------------------------------------------------------------------*/ -static int SHA_BusyWait_l(void) +void hw_sha1(const unsigned char *input, unsigned int len, + unsigned char *output, unsigned int chunk_sz) { - struct npcm_sha_regs *regs = sha_priv->regs; - u32 timeout = SHA_TIMEOUT; - - do { - if (timeout-- == 0) - return -ETIMEDOUT; - } while ((readb(®s->hash_ctr_sts) & HASH_CTR_STS_SHA_BUSY) - == HASH_CTR_STS_SHA_BUSY); - - return 0; + puts(" using BMC HW accelerator\n"); + npcm_sha_calc(input, len, output, type_sha1); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_GetShaDigest_l */ -/* */ -/* Parameters: hashDigest - buffer for the hash output. */ -/* type - SHA module type */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine copy the hash digest from the hardware */ -/* and into given buffer (in ram) */ -/*----------------------------------------------------------------------------*/ -static void SHA_GetShaDigest_l(u8 *hashdigest, u8 type) +int hw_sha_init(struct hash_algo *algo, void **ctxp) { - struct npcm_sha_regs *regs = sha_priv->regs; - u16 j; - u8 len = SHA_HASH_LENGTH(type) / sizeof(u32); - - // Copy Bytes from SHA module to given buffer - for (j = 0; j < len; j++) - ((u32 *)hashdigest)[j] = readl(®s->hash_dig[j]); -} + if (!strcmp("sha1", algo->name)) { + npcm_sha_init(type_sha1); + } else if (!strcmp("sha256", algo->name)) { + npcm_sha_init(type_sha256); + } else if (!strcmp("sha384", algo->name)) { + if (!sha_priv->support_sha512) + return -ENOTSUPP; + npcm_sha_init(type_sha384); + } else if (!strcmp("sha512", algo->name)) { + if (!sha_priv->support_sha512) + return -ENOTSUPP; + npcm_sha_init(type_sha512); + } else { + return -ENOTSUPP; + } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_SetShaDigest_l */ -/* */ -/* Parameters: hashDigest - input buffer to set as hash digest */ -/* type - SHA module type */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine set the hash digest in the hardware from */ -/* a given buffer (in ram) */ -/*----------------------------------------------------------------------------*/ -static void SHA_SetShaDigest_l(const u32 *hashdigest, u8 type) -{ - struct npcm_sha_regs *regs = sha_priv->regs; - u16 j; - u8 len = SHA_HASH_LENGTH(type) / sizeof(u32); + printf("Using npcm SHA engine\n"); + npcm_sha_reset(); + npcm_sha_enable(true); - // Copy Bytes from given buffer to SHA module - for (j = 0; j < len; j++) - writel(hashdigest[j], ®s->hash_dig[j]); + return 0; } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_SetBlock_l */ -/* */ -/* Parameters: data - data to copy */ -/* len - size of data */ -/* position - byte offset into the block at which data */ -/* should be placed */ -/* block - block buffer */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine load bytes into block buffer */ -/*----------------------------------------------------------------------------*/ -static void SHA_SetBlock_l(const u8 *data, u32 len, u16 position, u32 *block) +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last) { - u8 *dest = (u8 *)block; - - memcpy(dest + position, data, len); + return npcm_sha_update(buf, size); } -/*----------------------------------------------------------------------------*/ -/* Function: SHA_SetBlock_l */ -/* */ -/* Parameters: */ -/* len - size of data */ -/* position - byte offset into the block at which data */ -/* should be placed */ -/* block - block buffer */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine load zero's into the block buffer */ -/*----------------------------------------------------------------------------*/ -static void SHA_ClearBlock_l(u16 len, u16 position, u32 *block) +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size) { - u8 *dest = (u8 *)block; + int ret; - memset(dest + position, 0, len); -} + ret = npcm_sha_finish(dest_buf); + npcm_sha_enable(false); -/*----------------------------------------------------------------------------*/ -/* Function: SHA_SetLength32_l */ -/* */ -/* Parameters: */ -/* handlePtr - SHA processing handle pointer */ -/* block - block buffer */ -/* Returns: none */ -/* Side effects: */ -/* Description: This routine set the length of the hash's data */ -/* len is the 32-bit byte length of the message */ -/*lint -efunc(734,SHA_SetLength32_l) Supperess loss of percision lint warning */ -/*----------------------------------------------------------------------------*/ -static void SHA_SetLength32_l(struct SHA_HANDLE_T *handleptr, u32 *block) -{ - u16 *secrunbufferswappedptr = (u16 *)(void *)(block); - - secrunbufferswappedptr[(SHA_BLOCK_LENGTH / sizeof(u16)) - 1] = (u16) - ((handleptr->length0 << 3) << 8) | ((u16)(handleptr->length0 << 3) >> 8); - secrunbufferswappedptr[(SHA_BLOCK_LENGTH / sizeof(u16)) - 2] = (u16) - ((handleptr->length0 >> (16 - 3)) >> 8) | ((u16)(handleptr->length0 >> (16 - 3)) << 8); - secrunbufferswappedptr[(SHA_BLOCK_LENGTH / sizeof(u16)) - 3] = (u16) - ((handleptr->length1 << 3) << 8) | ((u16)(handleptr->length1 << 3) >> 8); - secrunbufferswappedptr[(SHA_BLOCK_LENGTH / sizeof(u16)) - 4] = (u16) - ((handleptr->length1 >> (16 - 3)) >> 8) | ((u16)(handleptr->length1 >> (16 - 3)) << 8); + return ret; } static int npcm_sha_bind(struct udevice *dev) @@ -870,12 +347,15 @@ static int npcm_sha_bind(struct udevice *dev) if (!sha_priv) return -ENOMEM; - sha_priv->regs = dev_remap_addr_index(dev, 0); - if (!sha_priv->regs) { + sha_priv->base = dev_read_addr_ptr(dev); + if (!sha_priv->base) { printf("Cannot find sha reg address, binding failed\n"); return -EINVAL; } + if (IS_ENABLED(CONFIG_ARCH_NPCM8XX)) + sha_priv->support_sha512 = true; + printf("SHA: NPCM SHA module bind OK\n"); return 0;