From: Jagan Teki Date: Mon, 28 Dec 2015 16:54:08 +0000 (+0530) Subject: spi: Use BIT macro X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=29ee0262e11d73c3602d9f0a5a8f1030e76008c1;p=u-boot.git spi: Use BIT macro Used BIT macro like 1 << nr as BIT(nr) where nr is 0...n Cc: Simon Glass Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Tested-by: Mugunthan V N Tested-by: Bin Meng Tested-by: Jagan Teki Reviewed-by: Bin Meng Signed-off-by: Jagan Teki --- diff --git a/include/spi.h b/include/spi.h index 82e72ab38b..dbd0df89a7 100644 --- a/include/spi.h +++ b/include/spi.h @@ -11,26 +11,26 @@ #define _SPI_H_ /* SPI mode flags */ -#define SPI_CPHA 0x01 /* clock phase */ -#define SPI_CPOL 0x02 /* clock polarity */ +#define SPI_CPHA BIT(0) /* clock phase */ +#define SPI_CPOL BIT(1) /* clock polarity */ #define SPI_MODE_0 (0|0) /* (original MicroWire) */ #define SPI_MODE_1 (0|SPI_CPHA) #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) -#define SPI_CS_HIGH 0x04 /* CS active high */ -#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ -#define SPI_3WIRE 0x10 /* SI/SO signals shared */ -#define SPI_LOOP 0x20 /* loopback mode */ -#define SPI_SLAVE 0x40 /* slave mode */ -#define SPI_PREAMBLE 0x80 /* Skip preamble bytes */ -#define SPI_TX_BYTE 0x100 /* transmit with 1 wire byte */ -#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */ +#define SPI_CS_HIGH BIT(2) /* CS active high */ +#define SPI_LSB_FIRST BIT(3) /* per-word bits-on-wire */ +#define SPI_3WIRE BIT(4) /* SI/SO signals shared */ +#define SPI_LOOP BIT(5) /* loopback mode */ +#define SPI_SLAVE BIT(6) /* slave mode */ +#define SPI_PREAMBLE BIT(7) /* Skip preamble bytes */ +#define SPI_TX_BYTE BIT(8) /* transmit with 1 wire byte */ +#define SPI_TX_QUAD BIT(9) /* transmit with 4 wires */ /* SPI mode_rx flags */ -#define SPI_RX_SLOW (1 << 0) -#define SPI_RX_FAST (1 << 1) -#define SPI_RX_DUAL (1 << 2) -#define SPI_RX_QUAD (1 << 4) +#define SPI_RX_SLOW BIT(0) +#define SPI_RX_FAST BIT(1) +#define SPI_RX_DUAL BIT(2) +#define SPI_RX_QUAD BIT(4) /* SPI bus connection options - see enum spi_dual_flash */ #define SPI_CONN_DUAL_SHARED (1 << 0) @@ -116,12 +116,12 @@ struct spi_slave { u8 option; u8 flags; -#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */ -#define SPI_XFER_END 0x02 /* Deassert CS after transfer */ +#define SPI_XFER_BEGIN BIT(0) /* Assert CS before transfer */ +#define SPI_XFER_END BIT(1) /* Deassert CS after transfer */ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) -#define SPI_XFER_MMAP 0x04 /* Memory Mapped start */ -#define SPI_XFER_MMAP_END 0x08 /* Memory Mapped End */ -#define SPI_XFER_U_PAGE 0x10 +#define SPI_XFER_MMAP BIT(2) /* Memory Mapped start */ +#define SPI_XFER_MMAP_END BIT(3) /* Memory Mapped End */ +#define SPI_XFER_U_PAGE BIT(4) }; /**