From: Bhupesh Sharma Date: Tue, 10 Sep 2024 09:50:13 +0000 (+0200) Subject: ufs: Add Support for Qualcomm UFS HC driver X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=0c9c501a87e0070b944ffcd8f0d9942353048f41;p=u-boot.git ufs: Add Support for Qualcomm UFS HC driver Add Support for the Host Controller driver for UFS HC present on Qualcomm Snapdragon SoCs. It has been successfully tested on SDM845, SM8250, SM8550 ant SM8650 SoCs. Signed-off-by: Bhupesh Sharma Tested-by: Julius Lehmann Tested-by: Caleb Connolly #rb3gen2 Link: https://lore.kernel.org/r/20240910-topic-ufs-qcom-controller-v1-4-54c0d2231b10@linaro.org Signed-off-by: Neil Armstrong --- diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig index ad5d0316f6..b08ca08b07 100644 --- a/drivers/ufs/Kconfig +++ b/drivers/ufs/Kconfig @@ -26,6 +26,13 @@ config UFS_PCI If unsure, say N. +config QCOM_UFS + bool "Qualcomm Host Controller driver for UFS" + depends on UFS && ARCH_SNAPDRAGON + help + This selects the platform driver for the UFS host + controller present on Qualcomm Snapdragon SoCs. + config TI_J721E_UFS bool "Glue Layer driver for UFS on TI J721E devices" help diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile index 745de5c3db..2a378e4511 100644 --- a/drivers/ufs/Makefile +++ b/drivers/ufs/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_UFS) += ufs.o ufs-uclass.o obj-$(CONFIG_CADENCE_UFS) += cdns-platform.o +obj-$(CONFIG_QCOM_UFS) += ufs-qcom.o obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o obj-$(CONFIG_UFS_PCI) += ufs-pci.o obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o diff --git a/drivers/ufs/ufs-qcom.c b/drivers/ufs/ufs-qcom.c new file mode 100644 index 0000000000..843585726c --- /dev/null +++ b/drivers/ufs/ufs-qcom.c @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. + * Copyright (C) 2023-2024 Linaro Limited + * Authors: + * - Bhupesh Sharma + * - Neil Armstrong + * + * Based on Linux driver + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ufs.h" +#include "ufs-qcom.h" + +#define ceil(freq, div) ((freq) % (div) == 0 ? ((freq) / (div)) : ((freq) / (div) + 1)) + +static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_hba *hba, bool enable); + +static int ufs_qcom_enable_clks(struct ufs_qcom_priv *priv) +{ + int err; + + if (priv->is_clks_enabled) + return 0; + + err = clk_enable_bulk(&priv->clks); + if (err) + return err; + + priv->is_clks_enabled = true; + + return 0; +} + +static int ufs_qcom_init_clks(struct ufs_qcom_priv *priv) +{ + int err; + struct udevice *dev = priv->hba->dev; + + err = clk_get_bulk(dev, &priv->clks); + if (err) + return err; + + return 0; +} + +static int ufs_qcom_check_hibern8(struct ufs_hba *hba) +{ + int err, retry_count = 50; + u32 tx_fsm_val = 0; + + do { + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + if (err || tx_fsm_val == TX_FSM_HIBERN8) + break; + + /* max. 200us */ + udelay(200); + retry_count--; + } while (retry_count != 0); + + /* Check the state again */ + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + + if (err) { + dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", + __func__, err); + } else if (tx_fsm_val != TX_FSM_HIBERN8) { + err = tx_fsm_val; + dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", + __func__, err); + } + + return err; +} + +static void ufs_qcom_select_unipro_mode(struct ufs_qcom_priv *priv) +{ + ufshcd_rmwl(priv->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1); + + if (priv->hw_ver.major >= 0x05) + ufshcd_rmwl(priv->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); +} + +/* + * ufs_qcom_reset - reset host controller and PHY + */ +static int ufs_qcom_reset(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int ret; + + ret = reset_assert(&priv->core_reset); + if (ret) { + dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", + __func__, ret); + return ret; + } + + /* + * The hardware requirement for delay between assert/deassert + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to + * ~125us (4/32768). To be on the safe side add 200us delay. + */ + udelay(210); + + ret = reset_deassert(&priv->core_reset); + if (ret) + dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", + __func__, ret); + + udelay(1100); + + return 0; +} + +/** + * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks + * @hba: host controller instance + * + * QCOM UFS host controller might have some non standard behaviours (quirks) + * than what is specified by UFSHCI specification. Advertise all such + * quirks to standard UFS host controller driver so standard takes them into + * account. + */ +static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (priv->hw_ver.major == 0x2) + hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; + + if (priv->hw_ver.major > 0x3) + hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; +} + +/** + * ufs_qcom_setup_clocks - enables/disable clocks + * @hba: host controller instance + * @on: If true, enable clocks else disable them. + * @status: PRE_CHANGE or POST_CHANGE notify + * + * Returns 0 on success, non-zero on failure. + */ +static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, + enum ufs_notify_change_status status) +{ + switch (status) { + case PRE_CHANGE: + if (!on) + /* disable device ref_clk */ + ufs_qcom_dev_ref_clk_ctrl(hba, false); + break; + case POST_CHANGE: + if (on) + /* enable the device ref clock for HS mode*/ + ufs_qcom_dev_ref_clk_ctrl(hba, true); + break; + } + + return 0; +} + +static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + /* + * TOFIX: v4 controllers *should* be able to support HS Gear 4 + * but so far pwr_mode switch is failing on v4 controllers and HS Gear 4. + * only enable HS Gear > 3 for Controlers major version 5 and later. + */ + if (priv->hw_ver.major > 0x4) + return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); + + /* Default is HS-G3 */ + return UFS_HS_G3; +} + +static int ufs_get_max_pwr_mode(struct ufs_hba *hba, + struct ufs_pwr_mode_info *max_pwr_info) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 max_gear = ufs_qcom_get_hs_gear(hba); + + max_pwr_info->info.gear_rx = min(max_pwr_info->info.gear_rx, max_gear); + /* Qualcomm UFS only support symmetric Gear */ + max_pwr_info->info.gear_tx = max_pwr_info->info.gear_rx; + + if (priv->hw_ver.major >= 0x4 && max_pwr_info->info.gear_rx > UFS_HS_G3) + ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_TXHSADAPTTYPE), + PA_INITIAL_ADAPT); + + dev_info(hba->dev, "Max HS Gear: %d\n", max_pwr_info->info.gear_rx); + + return 0; +} + +static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + struct phy phy; + int ret; + + /* Reset UFS Host Controller and PHY */ + ret = ufs_qcom_reset(hba); + if (ret) + dev_warn(hba->dev, "%s: host reset returned %d\n", + __func__, ret); + + /* get phy */ + ret = generic_phy_get_by_name(hba->dev, "ufsphy", &phy); + if (ret) { + dev_warn(hba->dev, "%s: Unable to get QMP ufs phy, ret = %d\n", + __func__, ret); + return ret; + } + + /* phy initialization */ + ret = generic_phy_init(&phy); + if (ret) { + dev_err(hba->dev, "%s: phy init failed, ret = %d\n", + __func__, ret); + return ret; + } + + /* power on phy */ + ret = generic_phy_power_on(&phy); + if (ret) { + dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", + __func__, ret); + goto out_disable_phy; + } + + ufs_qcom_select_unipro_mode(priv); + + return 0; + +out_disable_phy: + generic_phy_exit(&phy); + + return ret; +} + +/* + * The UTP controller has a number of internal clock gating cells (CGCs). + * Internal hardware sub-modules within the UTP controller control the CGCs. + * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved + * in a specific operation, UTP controller CGCs are by default disabled and + * this function enables them (after every UFS link startup) to save some power + * leakage. + */ +static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) +{ + ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL, + REG_UFS_CFG2); + + /* Ensure that HW clock gating is enabled before next operations */ + ufshcd_readl(hba, REG_UFS_CFG2); +} + +static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int err; + + switch (status) { + case PRE_CHANGE: + ufs_qcom_power_up_sequence(hba); + /* + * The PHY PLL output is the source of tx/rx lane symbol + * clocks, hence, enable the lane clocks only after PHY + * is initialized. + */ + err = ufs_qcom_enable_clks(priv); + break; + case POST_CHANGE: + /* check if UFS PHY moved from DISABLED to HIBERN8 */ + err = ufs_qcom_check_hibern8(hba); + ufs_qcom_enable_hw_clk_gating(hba); + break; + default: + dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); + err = -EINVAL; + break; + } + + return err; +} + +/* Look for the maximum core_clk_unipro clock value */ +static u32 ufs_qcom_get_core_clk_unipro_max_freq(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + ofnode node = dev_ofnode(priv->hba->dev); + struct ofnode_phandle_args opp_table; + int pos, ret; + u32 clk = 0; + + /* Get core_clk_unipro clock index */ + pos = ofnode_stringlist_search(node, "clock-names", "core_clk_unipro"); + if (pos < 0) + goto fallback; + + /* Try parsing the opps */ + if (!ofnode_parse_phandle_with_args(node, "required-opps", + NULL, 0, 0, &opp_table) && + ofnode_device_is_compatible(opp_table.node, "operating-points-v2")) { + ofnode opp_node; + + ofnode_for_each_subnode(opp_node, opp_table.node) { + u64 opp_clk; + /* opp-hw contains the OPP frequency */ + ret = ofnode_read_u64_index(opp_node, "opp-hz", pos, &opp_clk); + if (ret) + continue; + + /* We don't handle larger clock values, ignore */ + if (opp_clk > U32_MAX) + continue; + + /* Only keep the largest value */ + if (opp_clk > clk) + clk = opp_clk; + } + + /* If we get a valid clock, return it or check legacy*/ + if (clk) + return clk; + } + + /* Legacy freq-table-hz has a pair of u32 per clocks entry, min then max */ + if (!ofnode_read_u32_index(node, "freq-table-hz", pos * 2 + 1, &clk) && + clk > 0) + return clk; + +fallback: + /* default for backwards compatibility */ + return UNIPRO_CORE_CLK_FREQ_150_MHZ * 1000 * 1000; +}; + +static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba, + u32 cycles_in_1us) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 cycles_in_40ns; + int err; + u32 reg; + + /* + * UFS host controller V4.0.0 onwards needs to program + * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed + * frequency of unipro core clk of UFS host controller. + */ + if (priv->hw_ver.major < 4) + return 0; + + /* + * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not + * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will + * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware + * specification expect to be 16. Hence use exact hardware spec + * mandated value for cycles_in_40ns instead of calculating using + * generic formulae. + */ + switch (cycles_in_1us) { + case UNIPRO_CORE_CLK_FREQ_403_MHZ: + cycles_in_40ns = 16; + break; + case UNIPRO_CORE_CLK_FREQ_300_MHZ: + cycles_in_40ns = 12; + break; + case UNIPRO_CORE_CLK_FREQ_201_5_MHZ: + cycles_in_40ns = 8; + break; + case UNIPRO_CORE_CLK_FREQ_150_MHZ: + cycles_in_40ns = 6; + break; + case UNIPRO_CORE_CLK_FREQ_100_MHZ: + cycles_in_40ns = 4; + break; + case UNIPRO_CORE_CLK_FREQ_75_MHZ: + cycles_in_40ns = 3; + break; + case UNIPRO_CORE_CLK_FREQ_37_5_MHZ: + cycles_in_40ns = 2; + break; + default: + dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n", + cycles_in_1us); + return -EINVAL; + } + + err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), ®); + if (err) + return err; + + reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK; + reg |= cycles_in_40ns; + + return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg); +} + +static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 core_clk_ctrl_reg; + u32 cycles_in_1us; + int err; + + cycles_in_1us = ceil(ufs_qcom_get_core_clk_unipro_max_freq(hba), + (1000 * 1000)); + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + &core_clk_ctrl_reg); + if (err) + return err; + + /* Bit mask is different for UFS host controller V4.0.0 onwards */ + if (priv->hw_ver.major >= 4) { + core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4; + core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us); + } else { + core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK; + core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us); + } + + /* Clear CORE_CLK_DIV_EN */ + core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; + + err = ufshcd_dme_set(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + core_clk_ctrl_reg); + if (err) + return err; + + /* Configure unipro core clk 40ns attribute */ + return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us); +} + +static u32 ufs_qcom_get_local_unipro_ver(struct ufs_hba *hba) +{ + /* HCI version 1.0 and 1.1 supports UniPro 1.41 */ + switch (hba->version) { + case UFSHCI_VERSION_10: + case UFSHCI_VERSION_11: + return UFS_UNIPRO_VER_1_41; + + case UFSHCI_VERSION_20: + case UFSHCI_VERSION_21: + default: + return UFS_UNIPRO_VER_1_6; + } +} + +static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + + switch (status) { + case PRE_CHANGE: + err = ufs_qcom_set_core_clk_ctrl(hba); + if (err) + dev_err(hba->dev, "cfg core clk ctrl failed\n"); + /* + * Some UFS devices (and may be host) have issues if LCC is + * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 + * before link startup which will make sure that both host + * and device TX LCC are disabled once link startup is + * completed. + */ + if (ufs_qcom_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) + err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); + + break; + default: + break; + } + + return err; +} + +static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_hba *hba, bool enable) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (enable ^ priv->is_dev_ref_clk_enabled) { + u32 temp = readl_relaxed(hba->mmio_base + REG_UFS_CFG1); + + if (enable) + temp |= BIT(26); + else + temp &= ~BIT(26); + + /* + * If we are here to disable this clock it might be immediately + * after entering into hibern8 in which case we need to make + * sure that device ref_clk is active for specific time after + * hibern8 enter. + */ + if (!enable) + udelay(10); + + writel_relaxed(temp, hba->mmio_base + REG_UFS_CFG1); + + /* + * Make sure the write to ref_clk reaches the destination and + * not stored in a Write Buffer (WB). + */ + readl(hba->mmio_base + REG_UFS_CFG1); + + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for at least 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + priv->is_dev_ref_clk_enabled = enable; + } +} + +/** + * ufs_qcom_init - bind phy with controller + * @hba: host controller instance + * + * Powers up PHY enabling clocks and regulators. + * + * Returns -EPROBE_DEFER if binding fails, returns negative error + * on phy power up failure and returns zero on success. + */ +static int ufs_qcom_init(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int err; + + priv->hba = hba; + + /* setup clocks */ + ufs_qcom_setup_clocks(hba, true, PRE_CHANGE); + + if (priv->hw_ver.major >= 0x4) + ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_TXHSADAPTTYPE), + PA_NO_ADAPT); + + ufs_qcom_setup_clocks(hba, true, POST_CHANGE); + + ufs_qcom_get_controller_revision(hba, &priv->hw_ver.major, + &priv->hw_ver.minor, + &priv->hw_ver.step); + dev_info(hba->dev, "Qcom UFS HC version: %d.%d.%d\n", + priv->hw_ver.major, + priv->hw_ver.minor, + priv->hw_ver.step); + + err = ufs_qcom_init_clks(priv); + if (err) { + dev_err(hba->dev, "failed to initialize clocks, err:%d\n", err); + return err; + } + + ufs_qcom_advertise_quirks(hba); + ufs_qcom_setup_clocks(hba, true, POST_CHANGE); + + return 0; +} + +/** + * ufs_qcom_device_reset() - toggle the (optional) device reset line + * @hba: per-adapter instance + * + * Toggles the (optional) reset line to reset the attached device. + */ +static int ufs_qcom_device_reset(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (!dm_gpio_is_valid(&priv->reset)) + return 0; + + /* + * The UFS device shall detect reset pulses of 1us, sleep for 10us to + * be on the safe side. + */ + dm_gpio_set_value(&priv->reset, true); + udelay(10); + + dm_gpio_set_value(&priv->reset, false); + udelay(10); + + return 0; +} + +static struct ufs_hba_ops ufs_qcom_hba_ops = { + .init = ufs_qcom_init, + .get_max_pwr_mode = ufs_get_max_pwr_mode, + .hce_enable_notify = ufs_qcom_hce_enable_notify, + .link_startup_notify = ufs_qcom_link_startup_notify, + .device_reset = ufs_qcom_device_reset, +}; + +static int ufs_qcom_probe(struct udevice *dev) +{ + struct ufs_qcom_priv *priv = dev_get_priv(dev); + int ret; + + /* get resets */ + ret = reset_get_by_name(dev, "rst", &priv->core_reset); + if (ret) { + dev_err(dev, "failed to get reset, ret:%d\n", ret); + return ret; + } + + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, GPIOD_IS_OUT); + if (ret) { + dev_err(dev, "Warning: cannot get reset GPIO\n"); + } + + ret = ufshcd_probe(dev, &ufs_qcom_hba_ops); + if (ret) { + dev_err(dev, "ufshcd_probe() failed, ret:%d\n", ret); + return ret; + } + + return 0; +} + +static int ufs_qcom_bind(struct udevice *dev) +{ + struct udevice *scsi_dev; + + return ufs_scsi_bind(dev, &scsi_dev); +} + +static const struct udevice_id ufs_qcom_ids[] = { + { .compatible = "qcom,ufshc" }, + {}, +}; + +U_BOOT_DRIVER(qcom_ufshcd) = { + .name = "qcom-ufshcd", + .id = UCLASS_UFS, + .of_match = ufs_qcom_ids, + .probe = ufs_qcom_probe, + .bind = ufs_qcom_bind, + .priv_auto = sizeof(struct ufs_qcom_priv), +}; diff --git a/drivers/ufs/ufs-qcom.h b/drivers/ufs/ufs-qcom.h new file mode 100644 index 0000000000..de957ae60f --- /dev/null +++ b/drivers/ufs/ufs-qcom.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +#ifndef UFS_QCOM_H_ +#define UFS_QCOM_H_ + +#include +#include + +#define MPHY_TX_FSM_STATE 0x41 +#define TX_FSM_HIBERN8 0x1 +#define DEFAULT_CLK_RATE_HZ 1000000 + +#define UFS_HW_VER_MAJOR_MASK GENMASK(31, 28) +#define UFS_HW_VER_MINOR_MASK GENMASK(27, 16) +#define UFS_HW_VER_STEP_MASK GENMASK(15, 0) + +/* QCOM UFS host controller vendor specific registers */ +enum { + REG_UFS_SYS1CLK_1US = 0xC0, + REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4, + REG_UFS_LOCAL_PORT_ID_REG = 0xC8, + REG_UFS_PA_ERR_CODE = 0xCC, + /* On older UFS revisions, this register is called "RETRY_TIMER_REG" */ + REG_UFS_PARAM0 = 0xD0, + /* On older UFS revisions, this register is called "REG_UFS_PA_LINK_STARTUP_TIMER" */ + REG_UFS_CFG0 = 0xD8, + REG_UFS_CFG1 = 0xDC, + REG_UFS_CFG2 = 0xE0, + REG_UFS_HW_VERSION = 0xE4, + + UFS_TEST_BUS = 0xE8, + UFS_TEST_BUS_CTRL_0 = 0xEC, + UFS_TEST_BUS_CTRL_1 = 0xF0, + UFS_TEST_BUS_CTRL_2 = 0xF4, + UFS_UNIPRO_CFG = 0xF8, + + /* + * QCOM UFS host controller vendor specific registers + * added in HW Version 3.0.0 + */ + UFS_AH8_CFG = 0xFC, + + REG_UFS_CFG3 = 0x271C, +}; + +/* bit definitions for REG_UFS_CFG0 register */ +#define QUNIPRO_G4_SEL BIT(5) + +/* bit definitions for REG_UFS_CFG1 register */ +#define QUNIPRO_SEL BIT(0) +#define UFS_PHY_SOFT_RESET BIT(1) +#define UTP_DBG_RAMS_EN BIT(17) +#define TEST_BUS_EN BIT(18) +#define TEST_BUS_SEL GENMASK(22, 19) +#define UFS_REG_TEST_BUS_EN BIT(30) + +#define UFS_PHY_RESET_ENABLE 1 +#define UFS_PHY_RESET_DISABLE 0 + +/* bit definitions for REG_UFS_CFG2 register */ +#define UAWM_HW_CGC_EN BIT(0) +#define UARM_HW_CGC_EN BIT(1) +#define TXUC_HW_CGC_EN BIT(2) +#define RXUC_HW_CGC_EN BIT(3) +#define DFC_HW_CGC_EN BIT(4) +#define TRLUT_HW_CGC_EN BIT(5) +#define TMRLUT_HW_CGC_EN BIT(6) +#define OCSC_HW_CGC_EN BIT(7) + +/* bit definitions for REG_UFS_PARAM0 */ +#define MAX_HS_GEAR_MASK GENMASK(6, 4) +#define UFS_QCOM_MAX_GEAR(x) FIELD_GET(MAX_HS_GEAR_MASK, (x)) + +/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */ +#define TEST_BUS_SUB_SEL_MASK GENMASK(4, 0) /* All XXX_SEL fields are 5 bits wide */ + +#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\ + TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\ + DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\ + TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN) + +/* bit offset */ +#define OFFSET_CLK_NS_REG 0xa + +/* bit masks */ +#define MASK_TX_SYMBOL_CLK_1US_REG GENMASK(9, 0) +#define MASK_CLK_NS_REG GENMASK(23, 10) + +/* QUniPro Vendor specific attributes */ +#define PA_VS_CONFIG_REG1 0x9000 +#define DME_VS_CORE_CLK_CTRL 0xD002 +/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */ +#define CLK_1US_CYCLES_MASK_V4 GENMASK(27, 16) +#define CLK_1US_CYCLES_MASK GENMASK(7, 0) +#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8) +#define PA_VS_CORE_CLK_40NS_CYCLES 0x9007 +#define PA_VS_CORE_CLK_40NS_CYCLES_MASK GENMASK(6, 0) + +/* QCOM UFS host controller core clk frequencies */ +#define UNIPRO_CORE_CLK_FREQ_37_5_MHZ 38 +#define UNIPRO_CORE_CLK_FREQ_75_MHZ 75 +#define UNIPRO_CORE_CLK_FREQ_100_MHZ 100 +#define UNIPRO_CORE_CLK_FREQ_150_MHZ 150 +#define UNIPRO_CORE_CLK_FREQ_300_MHZ 300 +#define UNIPRO_CORE_CLK_FREQ_201_5_MHZ 202 +#define UNIPRO_CORE_CLK_FREQ_403_MHZ 403 + +static inline void +ufs_qcom_get_controller_revision(struct ufs_hba *hba, + u8 *major, u16 *minor, u16 *step) +{ + u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION); + + *major = FIELD_GET(UFS_HW_VER_MAJOR_MASK, ver); + *minor = FIELD_GET(UFS_HW_VER_MINOR_MASK, ver); + *step = FIELD_GET(UFS_HW_VER_STEP_MASK, ver); +}; + +/* Host controller hardware version: major.minor.step */ +struct ufs_hw_version { + u16 step; + u16 minor; + u8 major; +}; + +struct gpio_desc; + +struct ufs_qcom_priv { + struct phy *generic_phy; + struct ufs_hba *hba; + + struct clk_bulk clks; + bool is_clks_enabled; + + struct ufs_hw_version hw_ver; + + /* Reset control of HCI */ + struct reset_ctl core_reset; + + struct gpio_desc reset; + + bool is_dev_ref_clk_enabled; +}; + +#endif /* UFS_QCOM_H_ */ diff --git a/drivers/ufs/unipro.h b/drivers/ufs/unipro.h index 2f5726d4d3..6df953e6e6 100644 --- a/drivers/ufs/unipro.h +++ b/drivers/ufs/unipro.h @@ -140,6 +140,12 @@ #define PA_SLEEPNOCONFIGTIME 0x15A2 #define PA_STALLNOCONFIGTIME 0x15A3 #define PA_SAVECONFIGTIME 0x15A4 +#define PA_TXHSADAPTTYPE 0x15D4 + +/* Adapt type for PA_TXHSADAPTTYPE attribute */ +#define PA_REFRESH_ADAPT 0x00 +#define PA_INITIAL_ADAPT 0x01 +#define PA_NO_ADAPT 0x03 #define PA_TACTIVATE_TIME_UNIT_US 10 #define PA_HIBERN8_TIME_UNIT_US 100