From: Patrick Delaunay Date: Mon, 24 Apr 2023 14:21:10 +0000 (+0200) Subject: ARM: dts: stm32mp: alignment with v6.3 X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=08002ffd083d0caf8eea9c038a308dd45e2fb59c;p=u-boot.git ARM: dts: stm32mp: alignment with v6.3 Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay Reviewed-by: Marek Vasut Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi index d2472cd8f1..b2dce3a29f 100644 --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi @@ -6,6 +6,114 @@ #include &pinctrl { + adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 { + pins { + pinmux = , /* ADC1 in6 */ + ; /* ADC1 in12 */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_sleep_pins_a: i2c1-sleep-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_a: i2c5-sleep-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + }; + }; + + mcp23017_pins_a: mcp23017-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = ; /* TIM3_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = ; /* TIM3_CH4 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = ; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = ; /* TIM4_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = ; /* TIM8_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = ; /* TIM8_CH3 */ + }; + }; + + pwm14_pins_a: pwm14-0 { + pins { + pinmux = ; /* TIM14_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm14_sleep_pins_a: pwm14-sleep-0 { + pins { + pinmux = ; /* TIM14_CH1 */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = , /* SDMMC1_D0 */ @@ -108,6 +216,36 @@ }; }; + spi5_pins_a: spi5-0 { + pins1 { + pinmux = , /* SPI5_SCK */ + ; /* SPI5_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI5_MISO */ + bias-disable; + }; + }; + + spi5_sleep_pins_a: spi5-sleep-0 { + pins { + pinmux = , /* SPI5_SCK */ + , /* SPI5_MISO */ + ; /* SPI5_MOSI */ + }; + }; + + stm32g0_intn_pins_a: stm32g0-intn-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index 6d82bf646d..d94ba25472 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -77,6 +77,28 @@ always-on; }; + /* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */ + reg11: reg11 { + compatible = "regulator-fixed"; + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + compatible = "regulator-fixed"; + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -97,6 +119,284 @@ }; }; + timers2: timer@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32h7-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers3: timer@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM3_K>; + clock-names = "int"; + dmas = <&dmamux1 23 0x400 0x1>, + <&dmamux1 24 0x400 0x1>, + <&dmamux1 25 0x400 0x1>, + <&dmamux1 26 0x400 0x1>, + <&dmamux1 27 0x400 0x1>, + <&dmamux1 28 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32h7-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers4: timer@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM4_K>; + clock-names = "int"; + dmas = <&dmamux1 29 0x400 0x1>, + <&dmamux1 30 0x400 0x1>, + <&dmamux1 31 0x400 0x1>, + <&dmamux1 32 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "up"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32h7-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers5: timer@40003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40003000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM5_K>; + clock-names = "int"; + dmas = <&dmamux1 55 0x400 0x1>, + <&dmamux1 56 0x400 0x1>, + <&dmamux1 57 0x400 0x1>, + <&dmamux1 58 0x400 0x1>, + <&dmamux1 59 0x400 0x1>, + <&dmamux1 60 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32h7-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers6: timer@40004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40004000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM6_K>; + clock-names = "int"; + dmas = <&dmamux1 69 0x400 0x1>; + dma-names = "up"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32h7-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40005000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM7_K>; + clock-names = "int"; + dmas = <&dmamux1 70 0x400 0x1>; + dma-names = "up"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32h7-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + lptimer1: timer@40009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40009000 0x400>; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM1_K>; + clock-names = "mux"; + wakeup-source; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + reg = <0x4000b000 0x400>; + #sound-dai-cells = <0>; + interrupts = ; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi2: spi@4000b000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = ; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + reg = <0x4000c000 0x400>; + #sound-dai-cells = <0>; + interrupts = ; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = ; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spdifrx: audio-controller@4000d000 { + compatible = "st,stm32h7-spdifrx"; + reg = <0x4000d000 0x400>; + #sound-dai-cells = <0>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = ; + dmas = <&dmamux1 93 0x400 0x01>, + <&dmamux1 94 0x400 0x01>; + dma-names = "rx", "rx-ctrl"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; @@ -106,6 +406,241 @@ status = "disabled"; }; + i2c1: i2c@40012000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 33 0x400 0x1>, + <&dmamux1 34 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x1>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 35 0x400 0x1>, + <&dmamux1 36 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + i2c-analog-filter; + status = "disabled"; + }; + + timers1: timer@44000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44000000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc TIM1_K>; + clock-names = "int"; + dmas = <&dmamux1 11 0x400 0x1>, + <&dmamux1 12 0x400 0x1>, + <&dmamux1 13 0x400 0x1>, + <&dmamux1 14 0x400 0x1>, + <&dmamux1 15 0x400 0x1>, + <&dmamux1 16 0x400 0x1>, + <&dmamux1 17 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32h7-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + timers8: timer@44001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44001000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc TIM8_K>; + clock-names = "int"; + dmas = <&dmamux1 47 0x400 0x1>, + <&dmamux1 48 0x400 0x1>, + <&dmamux1 49 0x400 0x1>, + <&dmamux1 50 0x400 0x1>, + <&dmamux1 51 0x400 0x1>, + <&dmamux1 52 0x400 0x1>, + <&dmamux1 53 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32h7-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; + }; + + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + reg = <0x44004000 0x400>; + #sound-dai-cells = <0>; + interrupts = ; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi1: spi@44004000 { + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = ; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + ranges = <0 0x4400a000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = ; + resets = <&rcc SAI1_R>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x20>; + #sound-dai-cells = <0>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + #sound-dai-cells = <0>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + ranges = <0 0x4400b000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = ; + resets = <&rcc SAI2_R>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x20>; + #sound-dai-cells = <0>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x20>; + #sound-dai-cells = <0>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + reg = <0>; + #io-channel-cells = <1>; + interrupts = ; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + reg = <1>; + #io-channel-cells = <1>; + interrupts = ; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -153,6 +688,314 @@ dma-channels = <16>; }; + adc_2: adc@48004000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48004000 0x400>; + interrupts = ; + clocks = <&rcc ADC2>, <&rcc ADC2_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc2: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_2>; + interrupts = <0>; + dmas = <&dmamux1 10 0x400 0x80000001>; + dma-names = "rx"; + status = "disabled"; + + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; + channel@16 { + reg = <16>; + label = "vddcpu"; + }; + channel@17 { + reg = <17>; + label = "vddq_ddr"; + }; + }; + }; + + usbotg_hs: usb@49000000 { + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; + reg = <0x49000000 0x40000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = ; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 16 16 16 16 16 16 16>; + dr_mode = "otg"; + otg-rev = <0x200>; + usb33d-supply = <&usb33>; + status = "disabled"; + }; + + i2s4: audio-controller@4c002000 { + compatible = "st,stm32h7-i2s"; + reg = <0x4c002000 0x400>; + #sound-dai-cells = <0>; + interrupts = ; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi4: spi@4c002000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c002000 0x400>; + interrupts = ; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 83 0x400 0x01>, + <&dmamux1 84 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi5: spi@4c003000 { + compatible = "st,stm32h7-spi"; + reg = <0x4c003000 0x400>; + interrupts = ; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 85 0x400 0x01>, + <&dmamux1 86 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c3: i2c@4c004000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c004000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 73 0x400 0x1>, + <&dmamux1 74 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x4>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c4: i2c@4c005000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c005000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 75 0x400 0x1>, + <&dmamux1 76 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x8>; + i2c-analog-filter; + status = "disabled"; + }; + + i2c5: i2c@4c006000 { + compatible = "st,stm32mp13-i2c"; + reg = <0x4c006000 0x400>; + interrupt-names = "event", "error"; + interrupts = , + ; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmamux1 115 0x400 0x1>, + <&dmamux1 116 0x400 0x1>; + dma-names = "rx", "tx"; + st,syscfg-fmp = <&syscfg 0x4 0x10>; + i2c-analog-filter; + status = "disabled"; + }; + + timers12: timer@4c007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c007000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM12_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32h7-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@4c008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c008000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM13_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32h7-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@4c009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c009000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM14_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32h7-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + + timers15: timer@4c00a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00a000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM15_K>; + clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32h7-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@4c00b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00b000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM16_K>; + clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@15 { + compatible = "st,stm32h7-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@4c00c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x4c00c000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc TIM17_K>; + clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32h7-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp13-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -181,6 +1024,111 @@ clocks = <&rcc SYSCFG>; }; + lptimer2: timer@50021000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50021000 0x400>; + interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM2_K>; + clock-names = "mux"; + wakeup-source; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + lptimer3: timer@50022000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50022000 0x400>; + interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM3_K>; + clock-names = "mux"; + wakeup-source; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + lptimer4: timer@50023000 { + compatible = "st,stm32-lptimer"; + reg = <0x50023000 0x400>; + interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM4_K>; + clock-names = "mux"; + wakeup-source; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + + lptimer5: timer@50024000 { + compatible = "st,stm32-lptimer"; + reg = <0x50024000 0x400>; + interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LPTIM5_K>; + clock-names = "mux"; + wakeup-source; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer { + compatible = "st,stm32-lptimer-timer"; + status = "disabled"; + }; + }; + mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; @@ -261,13 +1209,31 @@ clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC2_R>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; status = "disabled"; }; + usbh_ohci: usb@5800c000 { + compatible = "generic-ohci"; + reg = <0x5800c000 0x1000>; + clocks = <&usbphyc>, <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = ; + status = "disabled"; + }; + + usbh_ehci: usb@5800d000 { + compatible = "generic-ehci"; + reg = <0x5800d000 0x1000>; + clocks = <&usbphyc>, <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = ; + companion = <&usbh_ohci>; + status = "disabled"; + }; + iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; @@ -276,6 +1242,29 @@ status = "disabled"; }; + usbphyc: usbphyc@5a006000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc USBPHY_K>; + resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; + status = "disabled"; + + usbphyc_port0: usb-phy@0 { + #phy-cells = <0>; + reg = <0>; + }; + + usbphyc_port1: usb-phy@1 { + #phy-cells = <1>; + reg = <1>; + }; + }; + rtc: rtc@5c004000 { compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; @@ -294,6 +1283,7 @@ part_number_otp: part_number_otp@4 { reg = <0x4 0x2>; + bits = <0 12>; }; ts_cal1: calib@5c { reg = <0x5c 0x2>; @@ -314,7 +1304,6 @@ ranges = <0 0x50002000 0x8400>; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; gpioa: gpio@50002000 { gpio-controller; diff --git a/arch/arm/dts/stm32mp133.dtsi b/arch/arm/dts/stm32mp133.dtsi index 531c263c9f..df451c3c2a 100644 --- a/arch/arm/dts/stm32mp133.dtsi +++ b/arch/arm/dts/stm32mp133.dtsi @@ -33,5 +33,36 @@ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; + + adc_1: adc@48003000 { + compatible = "st,stm32mp13-adc-core"; + reg = <0x48003000 0x400>; + interrupts = ; + clocks = <&rcc ADC1>, <&rcc ADC1_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp13-adc"; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + interrupt-parent = <&adc_1>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x80000001>; + dma-names = "rx"; + status = "disabled"; + + channel@18 { + reg = <18>; + label = "vrefint"; + }; + }; + }; }; }; diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts index 52f86596ce..c40686cb2b 100644 --- a/arch/arm/dts/stm32mp135f-dk.dts +++ b/arch/arm/dts/stm32mp135f-dk.dts @@ -40,7 +40,7 @@ gpio-keys { compatible = "gpio-keys"; - user-pa13 { + button-user { label = "User-PA13"; linux,code = ; gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; @@ -59,6 +59,22 @@ }; }; + v3v3_sw: v3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "v3v3_sw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc: vdd-adc { + compatible = "regulator-fixed"; + regulator-name = "vdd_adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -66,6 +82,101 @@ regulator-max-microvolt = <2900000>; regulator-always-on; }; + + vdd_usb: vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_usb_cc_pins_a>; + vdda-supply = <&vdd_adc>; + vref-supply = <&vdd_adc>; + status = "okay"; + adc1: adc@0 { + status = "okay"; + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + */ + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <1000000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + mcp23017: pinctrl@21 { + compatible = "microchip,mcp23017"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default"; + pinctrl-0 = <&mcp23017_pins_a>; + interrupt-controller; + #interrupt-cells = <2>; + microchip,irq-mirror; + }; + + typec@53 { + compatible = "st,stm32g0-typec"; + reg = <0x53>; + /* Alert pin on PI2 */ + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + /* Internal pull-up on PI2 */ + pinctrl-names = "default"; + pinctrl-0 = <&stm32g0_intn_pins_a>; + firmware-name = "stm32g0-ucsi.mp135f-dk.fw"; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + con_usb_c_g0_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <170>; + i2c-scl-falling-time-ns = <5>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; }; &iwdg2 { @@ -90,8 +201,130 @@ status = "okay"; }; +&spi5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_pins_a>; + pinctrl-1 = <&spi5_sleep_pins_a>; + status = "disabled"; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a>; + pinctrl-1 = <&pwm4_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers8 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers14 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm14_pins_a>; + pinctrl-1 = <&pwm14_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@13 { + status = "okay"; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&v3v3_sw>; + }; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb-role-switch; + status = "okay"; + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usb_c_g0_ep>; + }; + }; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; +}; diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index 2cc9341d43..a9d2bec990 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -1261,7 +1261,7 @@ }; qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { + pins { pinmux = , /* QSPI_BK1_IO0 */ , /* QSPI_BK1_IO1 */ , /* QSPI_BK1_IO2 */ @@ -1270,12 +1270,6 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { - pinmux = ; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; }; qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { @@ -1283,13 +1277,12 @@ pinmux = , /* QSPI_BK1_IO0 */ , /* QSPI_BK1_IO1 */ , /* QSPI_BK1_IO2 */ - , /* QSPI_BK1_IO3 */ - ; /* QSPI_BK1_NCS */ + ; /* QSPI_BK1_IO3 */ }; }; qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { + pins { pinmux = , /* QSPI_BK2_IO0 */ , /* QSPI_BK2_IO1 */ , /* QSPI_BK2_IO2 */ @@ -1298,7 +1291,34 @@ drive-push-pull; slew-rate = <1>; }; - pins2 { + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + ; /* QSPI_BK2_IO3 */ + }; + }; + + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = ; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = ; /* QSPI_BK1_NCS */ + }; + }; + + qspi_cs2_pins_a: qspi-cs2-0 { + pins { pinmux = ; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; @@ -1306,13 +1326,9 @@ }; }; - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 { pins { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - , /* QSPI_BK2_IO3 */ - ; /* QSPI_BK2_NCS */ + pinmux = ; /* QSPI_BK2_NCS */ }; }; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index 5d178b5d3c..b3baacbb26 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -1693,7 +1693,6 @@ ranges = <0 0x50002000 0xa400>; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; gpioa: gpio@50002000 { gpio-controller; @@ -1822,7 +1821,6 @@ #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; ranges = <0 0x54004000 0x400>; - pins-are-numbered; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 2d5db41ed6..542226cfcf 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -8,6 +8,7 @@ #include "stm32mp157c-ed1.dts" #include #include +#include / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -90,7 +91,7 @@ port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; - bus-type = <5>; + bus-type = ; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; @@ -144,7 +145,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -255,8 +256,16 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a + &qspi_bk2_pins_a + &qspi_cs2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a + &qspi_bk2_sleep_pins_a + &qspi_cs2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; @@ -393,6 +402,7 @@ st,tune-squelch-level = <3>; st,tune-hs-rx-offset = <2>; st,no-lsfs-sc; + connector { compatible = "usb-a-connector"; vbus-supply = <&vbus_sw>; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi index 83e2c87713..de761743b2 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi @@ -429,8 +429,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi index 98033b5147..f36eec1b4a 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-som.dtsi @@ -191,8 +191,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x200000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index 34af90195d..49b3e768c8 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -72,7 +72,7 @@ sound { compatible = "audio-graph-card"; - label = "STM32MP1-DK"; + label = "STM32MP15-DK"; routing = "Playback" , "MCLK", "Capture" , "MCLK", @@ -149,7 +149,7 @@ max-speed = <1000>; phy-handle = <&phy0>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -509,14 +509,12 @@ sai2a: audio-controller@4400b004 { #clock-cells = <0>; dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; status = "okay"; sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; @@ -534,7 +532,7 @@ sai2b_port: port { sai2b_endpoint: endpoint { remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; diff --git a/include/dt-bindings/clock/stm32mp13-clks.h b/include/dt-bindings/clock/stm32mp13-clks.h index 799dee5b80..da4cb75674 100644 --- a/include/dt-bindings/clock/stm32mp13-clks.h +++ b/include/dt-bindings/clock/stm32mp13-clks.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ /* - * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Copyright (C) STMicroelectronics 2020 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. */ diff --git a/include/dt-bindings/reset/stm32mp13-resets.h b/include/dt-bindings/reset/stm32mp13-resets.h index 18ccb05db6..1b83a01de8 100644 --- a/include/dt-bindings/reset/stm32mp13-resets.h +++ b/include/dt-bindings/reset/stm32mp13-resets.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ /* - * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. */