From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Mon, 25 Mar 2019 10:34:00 +0000 (+0000)
Subject: pinctrl: at91: add slewrate support for SAM9X60
X-Git-Url: http://git.dujemihanovic.xyz/%22/img/sics.gif/%22/static/git-favicon.png?a=commitdiff_plain;h=068d4c0a11e43cce6e819e19884b49a8bc4e1722;p=u-boot.git

pinctrl: at91: add slewrate support for SAM9X60

Add slew rate support for SAM9X60 pin controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 62ee7668ab..27f274ff02 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -37,6 +37,9 @@ struct at91_pinctrl_priv {
 #define OUTPUT			BIT(7)
 #define OUTPUT_VAL_SHIFT	8
 #define OUTPUT_VAL		(0x1 << OUTPUT_VAL_SHIFT)
+#define SLEWRATE_SHIFT	9
+#define SLEWRATE_MASK	0x1
+#define SLEWRATE	(SLEWRATE_MASK << SLEWRATE_SHIFT)
 #define DEBOUNCE		BIT(16)
 #define DEBOUNCE_VAL_SHIFT	17
 #define DEBOUNCE_VAL		(0x3fff << DEBOUNCE_VAL_SHIFT)
@@ -60,6 +63,13 @@ enum drive_strength_bit {
 #define DRIVE_STRENGTH_BIT_MSK(name)	(DRIVE_STRENGTH_BIT_##name << \
 					 DRIVE_STRENGTH_SHIFT)
 
+enum slewrate_bit {
+	SLEWRATE_BIT_DIS,
+	SLEWRATE_BIT_ENA,
+};
+
+#define SLEWRATE_BIT_MSK(name)		(SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
+
 enum at91_mux {
 	AT91_MUX_GPIO = 0,
 	AT91_MUX_PERIPH_A = 1,
@@ -95,6 +105,7 @@ struct at91_pinctrl_mux_ops {
 	void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask);
 	void (*set_drivestrength)(struct at91_port *pio, u32 pin,
 				  u32 strength);
+	void (*set_slewrate)(struct at91_port *pio, u32 pin, u32 slewrate);
 };
 
 static u32 two_bit_pin_value_shift_amount(u32 pin)
@@ -270,6 +281,25 @@ static void at91_mux_sam9x60_set_drivestrength(struct at91_port *pio, u32 pin,
 	writel(tmp, reg);
 }
 
+static void at91_mux_sam9x60_set_slewrate(struct at91_port *pio, u32 pin,
+					  u32 setting)
+{
+	void *reg = &pio->reserved12[3];
+	u32 tmp;
+
+	if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA)
+		return;
+
+	tmp = readl(reg);
+
+	if (setting == SLEWRATE_BIT_DIS)
+		tmp &= ~BIT(pin);
+	else
+		tmp |= BIT(pin);
+
+	writel(tmp, reg);
+}
+
 static struct at91_pinctrl_mux_ops at91rm9200_ops = {
 	.mux_A_periph	= at91_mux_set_A_periph,
 	.mux_B_periph	= at91_mux_set_B_periph,
@@ -310,6 +340,7 @@ static struct at91_pinctrl_mux_ops sam9x60_ops = {
 	.set_pulldown	= at91_mux_pio3_set_pulldown,
 	.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
 	.set_drivestrength = at91_mux_sam9x60_set_drivestrength,
+	.set_slewrate   = at91_mux_sam9x60_set_slewrate,
 };
 
 static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask)
@@ -378,6 +409,9 @@ static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops,
 	if (ops->set_drivestrength)
 		ops->set_drivestrength(pio, pin,
 			(config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT);
+	if (ops->set_slewrate)
+		ops->set_slewrate(pio, pin,
+			(config & SLEWRATE) >> SLEWRATE_SHIFT);
 
 	return 0;
 }
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 2732d6c0fb..616f5ce400 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -17,6 +17,7 @@
 #define AT91_PINCTRL_DIS_SCHMIT		(1 << 4)
 #define AT91_PINCTRL_OUTPUT		(1 << 7)
 #define AT91_PINCTRL_OUTPUT_VAL(x)	((x & 0x1) << 8)
+#define AT91_PINCTRL_SLEWRATE		(1 << 9)
 #define AT91_PINCTRL_DEBOUNCE		(1 << 16)
 #define AT91_PINCTRL_DEBOUNCE_VAL(x)	(x << 17)
 
@@ -27,6 +28,9 @@
 #define AT91_PINCTRL_DRIVE_STRENGTH_MED			(0x2 << 5)
 #define AT91_PINCTRL_DRIVE_STRENGTH_HI			(0x3 << 5)
 
+#define AT91_PINCTRL_SLEWRATE_DIS	(0x0 << 9)
+#define AT91_PINCTRL_SLEWRATE_ENA	(0x1 << 9)
+
 #define AT91_PIOA	0
 #define AT91_PIOB	1
 #define AT91_PIOC	2