i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE

This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE
and set it default to 0.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 1c8b8f7b3e1f77dd652e745920846eda95c38c79..6200f1c1e1012df92ac9e83e78ce9bd7be84063f 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -274,6 +274,13 @@ config SYS_I2C_ZYNQ
        help
          Support for Xilinx I2C controller.
 
+config SYS_I2C_ZYNQ_SLAVE
+       hex "Set slave addr"
+       depends on SYS_I2C_ZYNQ
+       default 0
+       help
+         Set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr.
+
 config SYS_I2C_IHS
         bool "gdsys IHS I2C driver"
         depends on DM_I2C

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 52baa42a2f11aed8861053c63898ca04e557888f..20ff1136bab3da9bf2e1b68956916520eaff278c 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -127,7 +127,6 @@
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
 # define CONFIG_SYS_I2C_ZYNQ_SPEED             100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE             0
 #endif
 
 /* EEPROM */

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 07b121d7d67b6eb23d37e857427f6d6e0313a825..cf37f84e283b8f43481ca77d76968203855d638f 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -121,7 +121,6 @@
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
 # define CONFIG_SYS_I2C_ZYNQ_SPEED             100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE             0
 #endif
 
 /* EEPROM */