imx: imx8mn_evk: enable CONFIG_DM_SERIAL

Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

move the preloader_console_init() call after spl_init() to
avoid board hang

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index dfa81a0d652c86bfde55684244686d4f28c003f4..63f335be3b0fa3346a8a626f74455b010d280cb4 100644 (file)
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -115,14 +115,8 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-#define UART_PAD_CTRL  (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL  (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
-static iomux_v3_cfg_t const uart_pads[] = {
-       IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-       IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const wdog_pads[] = {
        IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -135,8 +129,6 @@ int board_early_init_f(void)
 
        set_wdog_reset(wdog);
 
-       imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
        return 0;
 }
 
@@ -152,8 +144,6 @@ void board_init_f(ulong dummy)
 
        timer_init();
 
-       preloader_console_init();
-
        /* Clear the BSS. */
        memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -163,6 +153,8 @@ void board_init_f(ulong dummy)
                hang();
        }
 
+       preloader_console_init();
+
        enable_tzc380();
 
        /* DDR initialization */

diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 917cdb5aa9d939a6dc34456dcaed6db8b8936ad9..474d9cfa4d2ecf22e8139d1a01adba451d4f0f49 100644 (file)
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -76,6 +76,7 @@ CONFIG_PINCTRL_IMX8M=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y

diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index b2981d1e3692f2a50df3c4fae161ffd3b0bf5fa4..5bc175154ba352f1c710a7924a77fa13f5a5caeb 100644 (file)
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -84,7 +84,6 @@ CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
-# CONFIG_SPL_DM_SERIAL is not set
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y