arm64: dts: rockchip: add NanoPC-T6 LTS

In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.

There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector

The top USB 2.0 connector comes directly from the SoC.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-4-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: db1dcbe5f752d423421f77d54d246398b196f670 ]

(cherry picked from commit f4a834fbc8cdb40fddd63d083e8d1c6189ba62dc)
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/dts/upstream/src/arm64/rockchip/rk3588-nanopc-t6-lts.dts b/dts/upstream/src/arm64/rockchip/rk3588-nanopc-t6-lts.dts
new file mode 100644 (file)
index 0000000..2d92bbb
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-nanopc-t6-lts.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "rk3588-nanopc-t6.dtsi"
+
+/ {
+       model = "FriendlyElec NanoPC-T6 LTS";
+       compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588";
+
+       /* provide power for on-board USB 2.0 hub */
+       vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+               pinctrl-0 = <&usb20_host_pwren>;
+               pinctrl-names = "default";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "vcc5v0_usb20_host";
+               vin-supply = <&vcc5v0_sys>;
+       };
+};
+
+&pinctrl {
+       usb {
+               usb20_host_pwren: usb20-host-pwren {
+                       rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&u2phy1 {
+       status = "okay";
+};
+
+&u2phy1_otg {
+       status = "okay";
+};
+
+&u2phy2_host {
+       phy-supply = <&vcc5v0_usb20_host>;
+};
+
+&usbdp_phy1 {
+       status = "okay";
+};
+
+&usb_host1_xhci {
+       dr_mode = "host";
+       status = "okay";
+};