Syncup with the latest DT from the Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
/*
* Xilinx ZC702 board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2011 - 2015 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "zynq-7000.dtsi"
/ {
- model = "Zynq ZC702 Board";
+ model = "Zynq ZC702 Development Board";
compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
serial0 = &uart1;
};
memory {
device_type = "memory";
- reg = <0 0x40000000>;
+ reg = <0x0 0x40000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds23 {
+ label = "ds23";
+ gpios = <&gpio0 10 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&amba {
+ ocm: sram@fffc0000 {
+ compatible = "mmio-sram";
+ reg = <0xfffc0000 0x10000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ hwmon@52 {
+ compatible = "ti,ucd9248";
+ reg = <52>;
+ };
+ hwmon@53 {
+ compatible = "ti,ucd9248";
+ reg = <53>;
+ };
+ hwmon@54 {
+ compatible = "ti,ucd9248";
+ reg = <54>;
+ };
+ };
+ };
+};
+
+&pinctrl0 {
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_9_grp";
+ };
+
+ conf {
+ groups = "can0_9_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO46";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO47";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-pull-up {
+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO7", "MIO8";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_10_grp";
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_0_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_0_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ mux-wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "gpio0_15_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
};
/*
* Xilinx ZC706 board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2011 - 2015 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "zynq-7000.dtsi"
/ {
- model = "Zynq ZC706 Board";
+ model = "Zynq ZC706 Development Board";
compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
serial0 = &uart1;
};
memory {
device_type = "memory";
- reg = <0 0x40000000>;
+ reg = <0x0 0x40000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
+
+ ethernet_phy: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ ucd90120@65 {
+ compatible = "ti,ucd90120";
+ reg = <0x65>;
+ };
+ };
+ };
+};
+
+&pinctrl0 {
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ low-power-enable;
+ bias-disable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-pull-up {
+ pins = "MIO46", "MIO47";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO7";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_10_grp";
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_14_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_14_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ mux-wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "gpio0_15_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
};
/*
* Xilinx ZED board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2011 - 2015 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "zynq-7000.dtsi"
/ {
- model = "Zynq ZED Board";
+ model = "Zynq Zed Development Board";
compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
aliases {
+ ethernet0 = &gem0;
serial0 = &uart1;
};
memory {
device_type = "memory";
- reg = <0 0x20000000>;
+ reg = <0x0 0x20000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
};
/*
* Digilent ZYBO board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2011 - 2015 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "zynq-7000.dtsi"
/ {
- model = "Zynq ZYBO Board";
- compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000";
+ model = "Zynq ZYBO Development Board";
+ compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
aliases {
+ ethernet0 = &gem0;
serial0 = &uart1;
};
memory {
device_type = "memory";
- reg = <0 0x20000000>;
+ reg = <0x0 0x20000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+};
+
+&clkc {
+ ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
};
projects / u-boot.git / commitdiff
