find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-name 'processed-schema*' \)
-find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+find_cmd = $(find_all_cmd) | \
+ sed 's|^$(srctree)/||' | \
+ grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
+ sed 's|^|$(srctree)/|'
CHK_DT_DOCS := $(shell $(find_cmd))
quiet_cmd_yamllint = LINT $(src)
properties:
compatible:
- const: "calxeda,hb-sregs-l2-ecc"
+ const: calxeda,hb-sregs-l2-ecc
reg:
maxItems: 1
- qcom,kryo660
- qcom,kryo685
- qcom,kryo780
+ - qcom,oryon
- qcom,scorpion
enable-method:
- menlo,mx8menlo # Verdin iMX8M Mini Module on i.MX8MM Menlo board
- toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
- toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board
+ - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow
- toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia
- const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- enum:
- toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
- toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+ - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow
- toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
- const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- description: Variscite VAR-SOM-MX8MN based boards
items:
- - const: variscite,var-som-mx8mn-symphony
+ - enum:
+ - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
+ - rve,rve-gateway # i.MX8MN RVE Gateway Board
+ - variscite,var-som-mx8mn-symphony
- const: variscite,var-som-mx8mn
- const: fsl,imx8mn
- gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+ - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
+ - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
+ - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
- toradex,verdin-imx8mp # Verdin iMX8M Plus Modules
- toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT
- toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules
- enum:
- toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
- toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board
+ - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
- toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia
- const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
- enum:
- toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
- toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+ - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
- toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
- const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module
- const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
- const: solidrun,lx2162a-som
- const: fsl,lx2160a
+ - description:
+ TQ-Systems TQMLX2160A is a series of socketable SOM featuring
+ LX2160A system-on-chip variants. MBLX2160A mainboard can be used a
+ starterkit.
+ items:
+ - enum:
+ - tq,lx2160a-tqmlx2160a-mblx2160a
+ - const: tq,lx2160a-tqmlx2160a
+ - const: fsl,lx2160a
+
- description: S32G2 based Boards
items:
- enum:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/google.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Tensor platforms
+
+maintainers:
+ - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+ ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel
+ devices.
+
+ Currently upstream this is devices using "gs101" SoC which is found in Pixel
+ 6, Pixel 6 Pro and Pixel 6a.
+
+ Google have a few different names for the SoC:
+ - Marketing name ("Tensor")
+ - Codename ("Whitechapel")
+ - SoC ID ("gs101")
+ - Die ID ("S5P9845")
+
+ Likewise there are a couple of names for the actual device
+ - Marketing name ("Pixel 6")
+ - Codename ("Oriole")
+
+ Devicetrees should use the lowercased SoC ID and lowercased board codename,
+ e.g. gs101 and gs101-oriole.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Google Pixel 6 / Oriole
+ items:
+ - enum:
+ - google,gs101-oriole
+ - const: google,gs101
+
+ # Bootloader requires empty ect node to be present
+ ect:
+ type: object
+ additionalProperties: false
+
+required:
+ - ect
+
+additionalProperties: true
+
+...
ranges: true
+patternProperties:
+ '^clock@':
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - hisilicon,hi3620-clock
+ - hisilicon,hi3620-mmc-clock
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
required:
- compatible
- reg
- const: marvell,armada-ap807-quad
- const: marvell,armada-ap807
+ - description:
+ Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+ Armada CN9130 COM Express CPU module
+ items:
+ - const: marvell,cn9130-ac5x-carrier
+ - const: marvell,rd-ac5x-carrier
+ - const: marvell,cn9130-cpu-module
+ - const: marvell,cn9130
+ - const: marvell,armada-ap807-quad
+ - const: marvell,armada-ap807
+
+ - description:
+ Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+ Armada CN9131 COM Express CPU module
+ items:
+ - const: marvell,cn9131-ac5x-carrier
+ - const: marvell,rd-ac5x-carrier
+ - const: marvell,cn9131-cpu-module
+ - const: marvell,cn9131
+ - const: marvell,armada-ap807-quad
+ - const: marvell,armada-ap807
+
additionalProperties: true
- enum:
- mediatek,mt8186-evb
- const: mediatek,mt8186
+ - items:
+ - enum:
+ - mediatek,mt8188-evb
+ - const: mediatek,mt8188
- items:
- enum:
- mediatek,mt8192-evb
items:
- const: google,kappa
- const: mediatek,mt8183
+ - description: Google Katsu (ASUS Chromebook Detachable CZ1)
+ items:
+ - enum:
+ - google,katsu-sku32
+ - google,katsu-sku38
+ - const: google,katsu
+ - const: mediatek,mt8183
- description: Google Kodama (Lenovo 10e Chromebook Tablet)
items:
- enum:
- google,kodama-sku32
- const: google,kodama
- const: mediatek,mt8183
+ - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
+ items:
+ - enum:
+ - google,makomo-sku0
+ - google,makomo-sku1
+ - const: google,makomo
+ - const: mediatek,mt8183
+ - description: Google Pico (Acer Chromebook Spin 311)
+ items:
+ - enum:
+ - google,pico-sku1
+ - google,pico-sku2
+ - const: google,pico
+ - const: mediatek,mt8183
- description: Google Willow (Acer Chromebook 311 C722/C722T)
items:
- enum:
+++ /dev/null
-MediaTek AUDSYS controller
-============================
-
-The MediaTek AUDSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
- - "mediatek,mt2701-audsys", "syscon"
- - "mediatek,mt6765-audsys", "syscon"
- - "mediatek,mt6779-audio", "syscon"
- - "mediatek,mt7622-audsys", "syscon"
- - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
- - "mediatek,mt8167-audiosys", "syscon"
- - "mediatek,mt8183-audiosys", "syscon"
- - "mediatek,mt8192-audsys", "syscon"
- - "mediatek,mt8516-audsys", "syscon"
-- #clock-cells: Must be 1
-
-The AUDSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Required sub-nodes:
--------
-For common binding part and usage, refer to
-../sonud/mt2701-afe-pcm.txt.
-
-Example:
-
- audsys: clock-controller@11220000 {
- compatible = "mediatek,mt7622-audsys", "syscon";
- reg = <0 0x11220000 0 0x2000>;
- #clock-cells = <1>;
-
- afe: audio-controller {
- ...
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AUDSYS controller
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@collabora.com>
+
+description:
+ The MediaTek AUDSYS controller provides various clocks to the system.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-audsys
+ - mediatek,mt6765-audsys
+ - mediatek,mt6779-audsys
+ - mediatek,mt7622-audsys
+ - mediatek,mt8167-audsys
+ - mediatek,mt8173-audsys
+ - mediatek,mt8183-audsys
+ - mediatek,mt8186-audsys
+ - mediatek,mt8192-audsys
+ - mediatek,mt8516-audsys
+ - const: syscon
+ - items:
+ # Special case for mt7623 for backward compatibility
+ - const: mediatek,mt7623-audsys
+ - const: mediatek,mt2701-audsys
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ audio-controller:
+ $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
+ type: object
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mt2701-power.h>
+ #include <dt-bindings/clock/mt2701-clk.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ audsys: clock-controller@11220000 {
+ compatible = "mediatek,mt7622-audsys", "syscon";
+ reg = <0 0x11220000 0 0x2000>;
+ #clock-cells = <1>;
+
+ afe: audio-controller {
+ compatible = "mediatek,mt2701-audio";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "afe", "asys";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+ <&audsys CLK_AUD_I2SO1>,
+ <&audsys CLK_AUD_I2SO2>,
+ <&audsys CLK_AUD_I2SO3>,
+ <&audsys CLK_AUD_I2SO4>,
+ <&audsys CLK_AUD_I2SIN1>,
+ <&audsys CLK_AUD_I2SIN2>,
+ <&audsys CLK_AUD_I2SIN3>,
+ <&audsys CLK_AUD_I2SIN4>,
+ <&audsys CLK_AUD_ASRCO1>,
+ <&audsys CLK_AUD_ASRCO2>,
+ <&audsys CLK_AUD_ASRCO3>,
+ <&audsys CLK_AUD_ASRCO4>,
+ <&audsys CLK_AUD_AFE>,
+ <&audsys CLK_AUD_AFE_CONN>,
+ <&audsys CLK_AUD_A1SYS>,
+ <&audsys CLK_AUD_A2SYS>,
+ <&audsys CLK_AUD_AFE_MRGIF>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_a1sys_hp",
+ "top_audio_a2sys_hp",
+ "i2s0_src_sel",
+ "i2s1_src_sel",
+ "i2s2_src_sel",
+ "i2s3_src_sel",
+ "i2s0_src_div",
+ "i2s1_src_div",
+ "i2s2_src_div",
+ "i2s3_src_div",
+ "i2s0_mclk_en",
+ "i2s1_mclk_en",
+ "i2s2_mclk_en",
+ "i2s3_mclk_en",
+ "i2so0_hop_ck",
+ "i2so1_hop_ck",
+ "i2so2_hop_ck",
+ "i2so3_hop_ck",
+ "i2si0_hop_ck",
+ "i2si1_hop_ck",
+ "i2si2_hop_ck",
+ "i2si3_hop_ck",
+ "asrc0_out_ck",
+ "asrc1_out_ck",
+ "asrc2_out_ck",
+ "asrc3_out_ck",
+ "audio_afe_pd",
+ "audio_afe_conn_pd",
+ "audio_a1sys_pd",
+ "audio_a2sys_pd",
+ "audio_mrgif_pd";
+
+ assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+ assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+ <&topckgen CLK_TOP_AUD2PLL_90M>;
+ assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+ };
+ };
+ };
+++ /dev/null
-Mediatek ethsys controller
-============================
-
-The Mediatek ethsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
- - "mediatek,mt2701-ethsys", "syscon"
- - "mediatek,mt7622-ethsys", "syscon"
- - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- - "mediatek,mt7629-ethsys", "syscon"
- - "mediatek,mt7981-ethsys", "syscon"
- - "mediatek,mt7986-ethsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The ethsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ethsys: clock-controller@1b000000 {
- compatible = "mediatek,mt2701-ethsys", "syscon";
- reg = <0 0x1b000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-};
- mediatek,mt7629-infracfg
- mediatek,mt7981-infracfg
- mediatek,mt7986-infracfg
+ - mediatek,mt7988-infracfg
- mediatek,mt8135-infracfg
- mediatek,mt8167-infracfg
- mediatek,mt8173-infracfg
- mediatek,mt8183-mmsys
- mediatek,mt8186-mmsys
- mediatek,mt8188-vdosys0
+ - mediatek,mt8188-vdosys1
+ - mediatek,mt8188-vppsys0
+ - mediatek,mt8188-vppsys1
- mediatek,mt8192-mmsys
- mediatek,mt8195-vdosys1
- mediatek,mt8195-vppsys0
- mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg
- mediatek,mt8186-pericfg
+ - mediatek,mt8188-pericfg
- mediatek,mt8195-pericfg
- mediatek,mt8516-pericfg
- const: syscon
+++ /dev/null
-QCOM Idle States for cpuidle driver
-
-ARM provides idle-state node to define the cpuidle states, as defined in [1].
-cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
-states. Idle states have different enter/exit latency and residency values.
-The idle states supported by the QCOM SoC are defined as -
-
- * Standby
- * Retention
- * Standalone Power Collapse (Standalone PC or SPC)
- * Power Collapse (PC)
-
-Standby: Standby does a little more in addition to architectural clock gating.
-When the WFI instruction is executed the ARM core would gate its internal
-clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
-trigger to execute the SPM state machine. The SPM state machine waits for the
-interrupt to trigger the core back in to active. This triggers the cache
-hierarchy to enter standby states, when all cpus are idle. An interrupt brings
-the SPM state machine out of its wait, the next step is to ensure that the
-cache hierarchy is also out of standby, and then the cpu is allowed to resume
-execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
-driver and is not defined in the DT. The SPM state machine should be
-configured to execute this state by default and after executing every other
-state below.
-
-Retention: Retention is a low power state where the core is clock gated and
-the memory and the registers associated with the core are retained. The
-voltage may be reduced to the minimum value needed to keep the processor
-registers active. The SPM should be configured to execute the retention
-sequence and would wait for interrupt, before restoring the cpu to execution
-state. Retention may have a slightly higher latency than Standby.
-
-Standalone PC: A cpu can power down and warmboot if there is a sufficient time
-between the time it enters idle and the next known wake up. SPC mode is used
-to indicate a core entering a power down state without consulting any other
-cpu or the system resources. This helps save power only on that core. The SPM
-sequence for this idle state is programmed to power down the supply to the
-core, wait for the interrupt, restore power to the core, and ensure the
-system state including cache hierarchy is ready before allowing core to
-resume. Applying power and resetting the core causes the core to warmboot
-back into Elevation Level (EL) which trampolines the control back to the
-kernel. Entering a power down state for the cpu, needs to be done by trapping
-into a EL. Failing to do so, would result in a crash enforced by the warm boot
-code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
-be flushed in s/w, before powering down the core.
-
-Power Collapse: This state is similar to the SPC mode, but distinguishes
-itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
-modes. In a hierarchical power domain SoC, this means L2 and other caches can
-be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
-voltages reduced, provided all cpus enter this state. Since the span of low
-power modes possible at this state is vast, the exit latency and the residency
-of this low power mode would be considered high even though at a cpu level,
-this essentially is cpu power down. The SPM in this state also may handshake
-with the Resource power manager (RPM) processor in the SoC to indicate a
-complete application processor subsystem shut down.
-
-The idle-state for QCOM SoCs are distinguished by the compatible property of
-the idle-states device node.
-
-The devicetree representation of the idle state should be -
-
-Required properties:
-
-- compatible: Must be one of -
- "qcom,idle-state-ret",
- "qcom,idle-state-spc",
- "qcom,idle-state-pc",
- and "arm,idle-state".
-
-Other required and optional properties are specified in [1].
-
-Example:
-
- idle-states {
- CPU_SPC: spc {
- compatible = "qcom,idle-state-spc", "arm,idle-state";
- entry-latency-us = <150>;
- exit-latency-us = <200>;
- min-residency-us = <2000>;
- };
- };
-
-[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell)
+
+maintainers:
+ - Jinlong Mao <quic_jinlmao@quicinc.com>
+ - Tao Zhang <quic_taozha@quicinc.com>
+
+description:
+ Support for ETM trace collection on remote processor using coresight
+ framework. Enabling this will allow turning on ETM tracing on remote
+ processor like modem processor via sysfs and collecting the trace
+ via coresight TMC sinks.
+
+properties:
+ compatible:
+ const: qcom,coresight-remote-etm
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Output connection to the CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - out-ports
+
+additionalProperties: false
+
+examples:
+ - |
+ etm {
+ compatible = "qcom,coresight-remote-etm";
+
+ out-ports {
+ port {
+ modem_etm0_out_funnel_modem: endpoint {
+ remote-endpoint = <&funnel_modem_in_modem_etm0>;
+ };
+ };
+ };
+ };
+...
minItems: 1
maxItems: 2
+ qcom,dsb-element-size:
+ description:
+ Specifies the DSB(Discrete Single Bit) element size supported by
+ the monitor. The associated aggregator will read this size before it
+ is enabled. DSB element size currently only supports 32-bit and 64-bit.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [32, 64]
+
+ qcom,dsb-msrs-num:
+ description:
+ Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
+ registers supported by the monitor. If this property is not configured
+ or set to 0, it means this DSB TPDM doesn't support MSR.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 32
+
clocks:
maxItems: 1
compatible = "qcom,coresight-tpdm", "arm,primecell";
reg = <0x0684c000 0x1000>;
+ qcom,dsb-element-size = /bits/ 8 <32>;
+ qcom,dsb-msrs-num = <16>;
+
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
select:
properties:
compatible:
- pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
required:
- compatible
compatible:
oneOf:
# Preferred naming style for compatibles of SoC components:
- - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$"
+ - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$"
- pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
# Legacy namings - variations of existing patterns/compatibles are OK,
# but do not add completely new entries to these:
- - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
- - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
- - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
- - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
- - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
- - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+ - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+ - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+ - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
+ - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+ - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$"
- enum:
- qcom,dsi-ctrl-6g-qcm2290
- qcom,gpucc-sdm630
sm8350
sm8450
sm8550
+ sm8650
+ x1e80100
The 'board' element must be one of the following strings:
adp
- ap-al02-c2
- ap-al02-c6
- ap-al02-c7
- ap-al02-c8
- ap-al02-c9
- ap-mi01.2
- ap-mi01.3
- ap-mi01.6
- ap-mi01.9
cdp
- cp01-c1
dragonboard
- hk01
- hk10-c1
- hk10-c2
idp
liquid
- rdp432-c2
mtp
+ qcp
qrd
rb2
ride
There are many devices in the list below that run the standard ChromeOS
bootloader setup and use the open source depthcharge bootloader to boot the
OS. These devices do not use the scheme described above. For details, see:
- https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+ https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
properties:
$nodename:
- items:
- enum:
+ - microsoft,dempsey
+ - microsoft,makepeace
+ - microsoft,moneypenny
- samsung,s3ve3g
- const: qcom,msm8226
- items:
- enum:
+ - htc,memul
+ - microsoft,superman-lte
+ - microsoft,tesla
+ - motorola,peregrine
+ - const: qcom,msm8926
+ - const: qcom,msm8226
+
+ - items:
+ - enum:
+ - huawei,kiwi
- longcheer,l9100
- samsung,a7
- sony,kanuti-tulip
- items:
- enum:
- fairphone,fp5
+ - qcom,qcm6490-idp
+ - qcom,qcs6490-rb3gen2
- const: qcom,qcm6490
- description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
- sony,pdx203-generic
- sony,pdx206-generic
- xiaomi,elish
+ - xiaomi,pipa
- const: qcom,sm8250
- items:
- qcom,sm8550-qrd
- const: qcom,sm8550
+ - items:
+ - enum:
+ - qcom,sm8650-mtp
+ - qcom,sm8650-qrd
+ - const: qcom,sm8650
+
+ - items:
+ - enum:
+ - qcom,x1e80100-crd
+ - qcom,x1e80100-qcp
+ - const: qcom,x1e80100
+
# Board compatibles go above
qcom,msm-id:
- const: amarula,vyasa-rk3288
- const: rockchip,rk3288
- - description: Anbernic RG351M
+ - description: Anbernic RK3326 Handheld Gaming Console
items:
- - const: anbernic,rg351m
+ - enum:
+ - anbernic,rg351m
+ - anbernic,rg351v
- const: rockchip,rk3326
- description: Anbernic RG353P
- const: chipspark,rayeager-px2
- const: rockchip,rk3066a
+ - description: Cool Pi Compute Module 5(CM5) EVB
+ items:
+ - enum:
+ - coolpi,pi-cm5-evb
+ - const: coolpi,pi-cm5
+ - const: rockchip,rk3588
+
+ - description: Cool Pi 4 Model B
+ items:
+ - const: coolpi,pi-4b
+ - const: rockchip,rk3588s
+
- description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
items:
- const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board
- const: edgeble,neural-compute-module-2 # Edgeble Neural Compute Module 2 SoM
- const: rockchip,rv1126
- - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
- items:
- - const: edgeble,neural-compute-module-6a-io # Edgeble Neural Compute Module 6A IO Board
- - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
- - const: rockchip,rk3588
-
- - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
+ - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards
items:
- - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board
- - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
+ - const: edgeble,neural-compute-module-6a-io # Edgeble NCM6A-IO Board
+ - enum:
+ - edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
+ - edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
- const: rockchip,rk3588
- description: Elgin RV1108 R1
- const: geekbuying,geekbox
- const: rockchip,rk3368
+ - description: Geniatech XPI-3128
+ items:
+ - const: geniatech,xpi-3128
+ - const: rockchip,rk3128
+
- description: Google Bob (Asus Chromebook Flip C101PA)
items:
- const: google,bob-rev13
- const: pine64,soquartz
- const: rockchip,rk3566
- - description: Powkiddy RGB30
+ - description: Powkiddy RK3566 Handheld Gaming Console
items:
- - const: powkiddy,rgb30
+ - enum:
+ - powkiddy,rgb30
+ - powkiddy,rk2023
+ - powkiddy,x55
- const: rockchip,rk3566
- description: Radxa Compute Module 3(CM3)
- const: tsd,rk3399-puma-haikou
- const: rockchip,rk3399
+ - description: Theobroma Systems RK3588-SBC Jaguar
+ items:
+ - const: tsd,rk3588-jaguar
+ - const: rockchip,rk3588
+
- description: Tronsmart Orion R68 Meta
items:
- const: tronsmart,orion-r68-meta
- const: rockchip,rk3568-bpi-r2pro
- const: rockchip,rk3568
+ - description: Sonoff iHost Smart Home Hub
+ items:
+ - const: itead,sonoff-ihost
+ - enum:
+ - rockchip,rv1126
+ - rockchip,rv1109
+
additionalProperties: true
...
- samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK
- const: samsung,exynosautov9
+ - description: Exynos Auto v920 based boards
+ items:
+ - enum:
+ - samsung,exynosautov920-sadk # Samsung Exynos Auto v920 SADK
+ - const: samsung,exynosautov920
+
required:
- compatible
- sprd,ums512-1h10
- const: sprd,ums512
+ - items:
+ - enum:
+ - sprd,ums9620-2h10
+ - const: sprd,ums9620
+
additionalProperties: true
...
- shiratech,stm32mp157a-iot-box # IoT Box
- shiratech,stm32mp157a-stinger96 # Stinger96
- st,stm32mp157c-ed1
+ - st,stm32mp157c-ed1-scmi
- st,stm32mp157a-dk1
+ - st,stm32mp157a-dk1-scmi
- st,stm32mp157c-dk2
+ - st,stm32mp157c-dk2-scmi
- const: st,stm32mp157
- - items:
- - const: st,stm32mp157a-dk1-scmi
- - const: st,stm32mp157a-dk1
- - const: st,stm32mp157
- - items:
- - const: st,stm32mp157c-dk2-scmi
- - const: st,stm32mp157c-dk2
- - const: st,stm32mp157
- - items:
- - const: st,stm32mp157c-ed1-scmi
- - const: st,stm32mp157c-ed1
- - const: st,stm32mp157
- items:
- const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
- items:
- const: st,stm32mp157c-ev1-scmi
- - const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
- const: topwise,a721
- const: allwinner,sun4i-a10
+ - description: Transpeed 8K618-T
+ items:
+ - const: transpeed,8k618-t
+ - const: allwinner,sun50i-h618
+
- description: Utoo P66
items:
- const: utoo,p66
- const: xunlong,orangepi-zero2
- const: allwinner,sun50i-h616
+ - description: Xunlong OrangePi Zero 2W
+ items:
+ - const: xunlong,orangepi-zero2w
+ - const: allwinner,sun50i-h618
+
- description: Xunlong OrangePi Zero 3
items:
- const: xunlong,orangepi-zero3
- enum:
- toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
- toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board
+ - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow
- toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia
- const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT
- const: toradex,verdin-am62 # Verdin AM62 Module
- enum:
- toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
- toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+ - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow
- toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia
- const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module
- const: toradex,verdin-am62 # Verdin AM62 Module
- amazon,omap4-kc1 # Amazon Kindle Fire (first generation)
- motorola,droid4 # Motorola Droid 4 XT894
- motorola,droid-bionic # Motorola Droid Bionic XT875
+ - motorola,xyboard-mz609
+ - motorola,xyboard-mz617
- ti,omap4-panda
- ti,omap4-sdp
- const: ti,omap4430
title: Ceva AHCI SATA Controller
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
description: |
The Ceva SATA controller mostly conforms to the AHCI interface with some
hd44780 {
compatible = "hit,hd44780";
display-height-chars = <2>;
- display-width-chars = <16>;
+ display-width-chars = <16>;
data-gpios = <&pcf8574 4 0>,
<&pcf8574 5 0>,
<&pcf8574 6 0>,
- qcom,sm8350-llcc
- qcom,sm8450-llcc
- qcom,sm8550-llcc
+ - qcom,sm8650-llcc
+ - qcom,x1e80100-llcc
reg:
minItems: 2
compatible:
contains:
enum:
+ - qcom,qdu1000-llcc
- qcom,sc7180-llcc
- qcom,sm6350-llcc
then:
compatible:
contains:
enum:
- - qcom,qdu1000-llcc
- qcom,sc8180x-llcc
- qcom,sc8280xp-llcc
+ - qcom,x1e80100-llcc
then:
properties:
reg:
- sifive,fu740-c000-ccache
- const: cache
- items:
- - const: starfive,jh7110-ccache
+ - enum:
+ - starfive,jh7100-ccache
+ - starfive,jh7110-ccache
- const: sifive,ccache0
- const: cache
- items:
contains:
enum:
- sifive,fu740-c000-ccache
+ - starfive,jh7100-ccache
- starfive,jh7110-ccache
- microchip,mpfs-ccache
contains:
enum:
- sifive,fu740-c000-ccache
+ - starfive,jh7100-ccache
- starfive,jh7110-ccache
then:
clk25m: clock-oscillator-25m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <25000000>;
+ clock-frequency = <25000000>;
clock-output-names = "clk25m";
};
...
+++ /dev/null
-Broadcom Kona Family Clocks
-
-This binding is associated with Broadcom SoCs having "Kona" style
-clock control units (CCUs). A CCU is a clock provider that manages
-a set of clock signals. Each CCU is represented by a node in the
-device tree.
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible
- Shall have a value of the form "brcm,<model>-<which>-ccu",
- where <model> is a Broadcom SoC model number and <which> is
- the name of a defined CCU. For example:
- "brcm,bcm11351-root-ccu"
- The compatible strings used for each supported SoC family
- are defined below.
-- reg
- Shall define the base and range of the address space
- containing clock control registers
-- #clock-cells
- Shall have value <1>. The permitted clock-specifier values
- are defined below.
-- clock-output-names
- Shall be an ordered list of strings defining the names of
- the clocks provided by the CCU.
-
-Device tree example:
-
- slave_ccu: slave_ccu {
- compatible = "brcm,bcm11351-slave-ccu";
- reg = <0x3e011000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "uartb",
- "uartb2",
- "uartb3",
- "uartb4";
- };
-
- ref_crystal_clk: ref_crystal {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
-
- uart@3e002000 {
- compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- reg = <0x3e002000 0x1000>;
- clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
-
-BCM281XX family
----------------
-CCU compatible string values for SoCs in the BCM281XX family are:
- "brcm,bcm11351-root-ccu"
- "brcm,bcm11351-aon-ccu"
- "brcm,bcm11351-hub-ccu"
- "brcm,bcm11351-master-ccu"
- "brcm,bcm11351-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM281XX family clocks. When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used. These specifiers are defined in:
- "include/dt-bindings/clock/bcm281xx.h"
-
- CCU Clock Type Index Specifier
- --- ----- ---- ----- ---------
- root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M
-
- aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER
- aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC
- aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR
-
- hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M
-
- master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1
- master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2
- master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3
- master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4
- master dmac peri 4 BCM281XX_MASTER_CCU_DMAC
- master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC
- master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M
- master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M
-
- slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB
- slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2
- slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3
- slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4
- slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0
- slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2
- slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1
- slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
- slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
- slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
-
-
-BCM21664 family
----------------
-CCU compatible string values for SoCs in the BCM21664 family are:
- "brcm,bcm21664-root-ccu"
- "brcm,bcm21664-aon-ccu"
- "brcm,bcm21664-master-ccu"
- "brcm,bcm21664-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM21664 family clocks. When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used. These specifiers are defined in:
- "include/dt-bindings/clock/bcm21664.h"
-
- CCU Clock Type Index Specifier
- --- ----- ---- ----- ---------
- root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
-
- aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
-
- master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
- master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
- master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
- master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
- master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
- master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
- master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
- master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
-
- slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
- slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
- slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
- slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
- slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
- slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
- slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
- slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,kona-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family clock control units (CCU)
+
+maintainers:
+ - Florian Fainelli <florian.fainelli@broadcom.com>
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+description: |
+ Broadcom "Kona" style clock control unit (CCU) is a clock provider that
+ manages a set of clock signals.
+
+ All available clock IDs are defined in
+ - include/dt-bindings/clock/bcm281xx.h for BCM281XX family
+ - include/dt-bindings/clock/bcm21664.h for BCM21664 family
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm11351-aon-ccu
+ - brcm,bcm11351-hub-ccu
+ - brcm,bcm11351-master-ccu
+ - brcm,bcm11351-root-ccu
+ - brcm,bcm11351-slave-ccu
+ - brcm,bcm21664-aon-ccu
+ - brcm,bcm21664-master-ccu
+ - brcm,bcm21664-root-ccu
+ - brcm,bcm21664-slave-ccu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 10
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clock-output-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm11351-aon-ccu
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: hub_timer
+ - const: pmu_bsc
+ - const: pmu_bsc_var
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm11351-hub-ccu
+ then:
+ properties:
+ clock-output-names:
+ const: tmon_1m
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm11351-master-ccu
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: sdio1
+ - const: sdio2
+ - const: sdio3
+ - const: sdio4
+ - const: usb_ic
+ - const: hsic2_48m
+ - const: hsic2_12m
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm11351-root-ccu
+ - brcm,bcm21664-root-ccu
+ then:
+ properties:
+ clock-output-names:
+ const: frac_1m
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm11351-slave-ccu
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: uartb
+ - const: uartb2
+ - const: uartb3
+ - const: uartb4
+ - const: ssp0
+ - const: ssp2
+ - const: bsc1
+ - const: bsc2
+ - const: bsc3
+ - const: pwm
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm21664-aon-ccu
+ then:
+ properties:
+ clock-output-names:
+ const: hub_timer
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm21664-master-ccu
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: sdio1
+ - const: sdio2
+ - const: sdio3
+ - const: sdio4
+ - const: sdio1_sleep
+ - const: sdio2_sleep
+ - const: sdio3_sleep
+ - const: sdio4_sleep
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm21664-slave-ccu
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: uartb
+ - const: uartb2
+ - const: uartb3
+ - const: bsc1
+ - const: bsc2
+ - const: bsc3
+ - const: bsc4
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@3e011000 {
+ compatible = "brcm,bcm11351-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "uartb4",
+ "ssp0",
+ "ssp2",
+ "bsc1",
+ "bsc2",
+ "bsc3",
+ "pwm";
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx93-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 ANATOP Clock Module
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+description: |
+ NXP i.MX93 ANATOP module which contains PLL and OSC to Clock Controller
+ Module.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx93-anatop
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@44480000 {
+ compatible = "fsl,imx93-anatop";
+ reg = <0x44480000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+ - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+ Google GS101 clock controller is comprised of several CMU units, generating
+ clocks for different domains. Those CMU units are modeled as separate device
+ tree nodes, and might depend on each other. The root clock in that clock tree
+ is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+ clock in dts.
+
+ CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+ dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All clocks available for usage
+ in clock consumer nodes are defined as preprocessor macros in
+ 'dt-bindings/clock/gs101.h' header.
+
+properties:
+ compatible:
+ enum:
+ - google,gs101-cmu-top
+ - google,gs101-cmu-apm
+ - google,gs101-cmu-misc
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ "#clock-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - google,gs101-cmu-top
+ - google,gs101-cmu-apm
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (24.576 MHz)
+
+ clock-names:
+ items:
+ - const: oscclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: google,gs101-cmu-misc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Misc bus clock (from CMU_TOP)
+ - description: Misc sss clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: bus
+ - const: sss
+
+additionalProperties: false
+
+examples:
+ # Clock controller node for CMU_TOP
+ - |
+ #include <dt-bindings/clock/google,gs101.h>
+
+ cmu_top: clock-controller@1e080000 {
+ compatible = "google,gs101-cmu-top";
+ reg = <0x1e080000 0x8000>;
+ #clock-cells = <1>;
+ clocks = <&ext_24_5m>;
+ clock-names = "oscclk";
+ };
+
+...
+++ /dev/null
-* Hisilicon Hi3620 Clock Controller
-
-The Hi3620 clock controller generates and supplies clock to various
-controllers within the Hi3620 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
- - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
- - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
- mediatek,mt7622-apmixedsys
- mediatek,mt7981-apmixedsys
- mediatek,mt7986-apmixedsys
+ - mediatek,mt7988-apmixedsys
- mediatek,mt8135-apmixedsys
- mediatek,mt8173-apmixedsys
- mediatek,mt8516-apmixedsys
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ethsys controller
+
+description:
+ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+maintainers:
+ - James Liao <jamesjj.liao@mediatek.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-ethsys
+ - mediatek,mt7622-ethsys
+ - mediatek,mt7629-ethsys
+ - mediatek,mt7981-ethsys
+ - mediatek,mt7986-ethsys
+ - mediatek,mt7988-ethsys
+ - const: syscon
+ - items:
+ - const: mediatek,mt7623-ethsys
+ - const: mediatek,mt2701-ethsys
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - reg
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@1b000000 {
+ compatible = "mediatek,mt2701-ethsys", "syscon";
+ reg = <0x1b000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-ethwarp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 ethwarp Controller
+
+maintainers:
+ - Daniel Golle <daniel@makrotopia.org>
+
+description:
+ The Mediatek MT7988 ethwarp controller provides clocks and resets for the
+ Ethernet related subsystems found the MT7988 SoC.
+ The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+ compatible:
+ items:
+ - const: mediatek,mt7988-ethwarp
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/ti-syscon.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@15031000 {
+ compatible = "mediatek,mt7988-ethwarp";
+ reg = <0 0x15031000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-xfi-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI PLL Clock Controller
+
+maintainers:
+ - Daniel Golle <daniel@makrotopia.org>
+
+description:
+ The MediaTek XFI PLL controller provides the 156.25MHz clock for the
+ Ethernet SerDes PHY from the 40MHz top_xtal clock.
+
+properties:
+ compatible:
+ const: mediatek,mt7988-xfi-pll
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - resets
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ clock-controller@11f40000 {
+ compatible = "mediatek,mt7988-xfi-pll";
+ reg = <0 0x11f40000 0 0x1000>;
+ resets = <&watchdog 16>;
+ #clock-cells = <1>;
+ };
+ };
- mediatek,mt8188-vdecsys
- mediatek,mt8188-vdecsys-soc
- mediatek,mt8188-vencsys
- - mediatek,mt8188-vppsys0
- - mediatek,mt8188-vppsys1
- mediatek,mt8188-wpesys
- mediatek,mt8188-wpesys-vpp0
- mediatek,mt7629-topckgen
- mediatek,mt7981-topckgen
- mediatek,mt7986-topckgen
+ - mediatek,mt7988-mcusys
+ - mediatek,mt7988-topckgen
- mediatek,mt8167-topckgen
- mediatek,mt8183-topckgen
- const: syscon
properties:
compatible:
enum:
+ - qcom,ipq5018-a53pll
- qcom,ipq5332-a53pll
- qcom,ipq6018-a53pll
- qcom,ipq8074-a53pll
See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
+allOf:
+ - $ref: qcom,gcc.yaml#
+
properties:
compatible:
const: qcom,sm8250-camcc
- const: bi_tcxo_ao
- const: sleep_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
power-domains:
items:
- description: MMCX power domain
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ6018
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+ - Taniya Das <quic_tdas@quicinc.com>
+ - Robert Marko <robimarko@gmail.com>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on IPQ6018.
+
+ See also::
+ include/dt-bindings/clock/qcom,gcc-ipq6018.h
+ include/dt-bindings/reset/qcom,gcc-ipq6018.h
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+properties:
+ compatible:
+ const: qcom,gcc-ipq6018
+
+ clocks:
+ items:
+ - description: board XO clock
+ - description: sleep clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep_clk
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq6018";
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo>, <&sleep_clk>;
+ clock-names = "xo", "sleep_clk";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
items:
- description: board XO clock
- description: sleep clock
+ - description: Gen3 QMP PCIe PHY PIPE clock
+ - description: Gen2 QMP PCIe PHY PIPE clock
clock-names:
items:
- const: xo
- const: sleep_clk
+ - const: pcie0_pipe
+ - const: pcie1_pipe
required:
- compatible
domains.
See also::
- include/dt-bindings/clock/qcom,gcc-ipq6018.h
- include/dt-bindings/reset/qcom,gcc-ipq6018.h
include/dt-bindings/clock/qcom,gcc-msm8953.h
include/dt-bindings/clock/qcom,gcc-mdm9607.h
properties:
compatible:
enum:
- - qcom,gcc-ipq6018
- qcom,gcc-mdm9607
required:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-ecpricc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ECPRI Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+ - Taniya Das <quic_tdas@quicinc.com>
+ - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+ Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control
+ module which supports the clocks, resets on QDU1000 and QRU1000
+
+ See also:: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,qdu1000-ecpricc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 source from GCC
+ - description: GPLL1 source from GCC
+ - description: GPLL2 source from GCC
+ - description: GPLL3 source from GCC
+ - description: GPLL4 source from GCC
+ - description: GPLL5 source from GCC
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@280000 {
+ compatible = "qcom,qdu1000-ecpricc";
+ reg = <0x00280000 0x31c00>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
- qcom,sm8350-rpmh-clk
- qcom,sm8450-rpmh-clk
- qcom,sm8550-rpmh-clk
+ - qcom,sm8650-rpmh-clk
+ - qcom,x1e80100-rpmh-clk
clocks:
maxItems: 1
See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
+allOf:
+ - $ref: qcom,gcc.yaml#
+
properties:
compatible:
const: qcom,sc7180-camcc
- const: iface
- const: xo
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
reg:
maxItems: 1
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+allOf:
+ - $ref: qcom,gcc.yaml#
+
properties:
compatible:
const: qcom,sc7280-camcc
- const: bi_tcxo_ao
- const: sleep_clk
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
reg:
maxItems: 1
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
+allOf:
+ - $ref: qcom,gcc.yaml#
+
properties:
compatible:
const: qcom,sdm845-camcc
items:
- const: bi_tcxo
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
reg:
maxItems: 1
required:
- compatible
- - reg
- clocks
- clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
See also::
include/dt-bindings/clock/qcom,sm8450-camcc.h
include/dt-bindings/clock/qcom,sm8550-camcc.h
+ include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+
+allOf:
+ - $ref: qcom,gcc.yaml#
properties:
compatible:
enum:
+ - qcom,sc8280xp-camcc
- qcom,sm8450-camcc
- qcom,sm8550-camcc
description:
A phandle to an OPP node describing required MMCX performance point.
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
reg:
maxItems: 1
required:
- compatible
- - reg
- clocks
- power-domains
- required-opps
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
include/dt-bindings/clock/qcom,sm8450-gpucc.h
include/dt-bindings/clock/qcom,sm8550-gpucc.h
include/dt-bindings/reset/qcom,sm8450-gpucc.h
+ include/dt-bindings/reset/qcom,sm8650-gpucc.h
properties:
compatible:
enum:
- qcom,sm8450-gpucc
- qcom,sm8550-gpucc
+ - qcom,sm8650-gpucc
clocks:
items:
Qualcomm TCSR clock control module provides the clocks, resets and
power domains on SM8550
- See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+ See also:
+ - include/dt-bindings/clock/qcom,sm8550-tcsr.h
+ - include/dt-bindings/clock/qcom,sm8650-tcsr.h
properties:
compatible:
items:
- - const: qcom,sm8550-tcsr
+ - enum:
+ - qcom,sm8550-tcsr
+ - qcom,sm8650-tcsr
- const: syscon
clocks:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8650
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ Qualcomm display clock control module provides the clocks, resets and power
+ domains on SM8650.
+
+ See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8650-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board Always On XO source
+ - description: Display's AHB clock
+ - description: sleep clock
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Byte clock from DSI PHY1
+ - description: Pixel clock from DSI PHY1
+ - description: Link clock from DP PHY0
+ - description: VCO DIV clock from DP PHY0
+ - description: Link clock from DP PHY1
+ - description: VCO DIV clock from DP PHY1
+ - description: Link clock from DP PHY2
+ - description: VCO DIV clock from DP PHY2
+ - description: Link clock from DP PHY3
+ - description: VCO DIV clock from DP PHY3
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8650-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ clock-controller@af00000 {
+ compatible = "qcom,sm8650-dispcc";
+ reg = <0x0af00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <&dp0_phy 0>,
+ <&dp0_phy 1>,
+ <&dp1_phy 0>,
+ <&dp1_phy 1>,
+ <&dp2_phy 0>,
+ <&dp2_phy 1>,
+ <&dp3_phy 0>,
+ <&dp3_phy 1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8650
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on SM8650
+
+ See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h
+
+properties:
+ compatible:
+ const: qcom,sm8650-gcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board Always On XO source
+ - description: Sleep clock source
+ - description: PCIE 0 Pipe clock source
+ - description: PCIE 1 Pipe clock source
+ - description: PCIE 1 Phy Auxiliary clock source
+ - description: UFS Phy Rx symbol 0 clock source
+ - description: UFS Phy Rx symbol 1 clock source
+ - description: UFS Phy Tx symbol 0 clock source
+ - description: USB3 Phy wrapper pipe clock source
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,sm8650-gcc";
+ reg = <0x00100000 0x001f4200>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <&pcie_1_phy_aux_clk>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
+ <&usb_1_qmpphy>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on X1E80100
+
+maintainers:
+ - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on X1E80100
+
+ See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h
+
+properties:
+ compatible:
+ const: qcom,x1e80100-gcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: PCIe 3 pipe clock
+ - description: PCIe 4 pipe clock
+ - description: PCIe 5 pipe clock
+ - description: PCIe 6a pipe clock
+ - description: PCIe 6b pipe clock
+ - description: USB QMP Phy 0 clock source
+ - description: USB QMP Phy 1 clock source
+ - description: USB QMP Phy 2 clock source
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the CX power domain.
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ clock-controller@100000 {
+ compatible = "qcom,x1e80100-gcc";
+ reg = <0x00100000 0x200000>;
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <&pcie3_phy>,
+ <&pcie4_phy>,
+ <&pcie5_phy>,
+ <&pcie6a_phy>,
+ <&pcie6b_phy>,
+ <&usb_1_ss0_qmpphy 0>,
+ <&usb_1_ss1_qmpphy 1>,
+ <&usb_1_ss2_qmpphy 2>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
1 -- DIF1
2 -- DIF2
3 -- DIF3
+ - 9FGV0841:
+ 0 -- DIF0
+ 1 -- DIF1
+ 2 -- DIF2
+ 3 -- DIF3
+ 4 -- DIF4
+ 5 -- DIF5
+ 6 -- DIF6
+ 7 -- DIF7
maintainers:
- Marek Vasut <marex@denx.de>
enum:
- renesas,9fgv0241
- renesas,9fgv0441
+ - renesas,9fgv0841
reg:
description: I2C device address
+++ /dev/null
-Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
-
-Reference
-[1] Si5351A/B/C Data Sheet
- https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
-
-The Si5351a/b/c are programmable i2c clock generators with up to 8 output
-clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
-3 output clocks are accessible. The internal structure of the clock
-generators can be found in [1].
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
- "silabs,si5351a" - Si5351a, QFN20 package
- "silabs,si5351a-msop" - Si5351a, MSOP10 package
- "silabs,si5351b" - Si5351b, QFN20 package
- "silabs,si5351c" - Si5351c, QFN20 package
-- reg: i2c device address, shall be 0x60 or 0x61.
-- #clock-cells: from common clock binding; shall be set to 1.
-- clocks: from common clock binding; list of parent clock
- handles, shall be xtal reference clock or xtal and clkin for
- si5351c only. Corresponding clock input names are "xtal" and
- "clkin" respectively.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-Optional properties:
-- silabs,pll-source: pair of (number, source) for each pll. Allows
- to overwrite clock source of pll A (number=0) or B (number=1).
-
-==Child nodes==
-
-Each of the clock outputs can be overwritten individually by
-using a child node to the I2C device node. If a child node for a clock
-output is not set, the eeprom configuration is not overwritten.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,clock-source: source clock of the output divider stage N, shall be
- 0 = multisynth N
- 1 = multisynth 0 for output clocks 0-3, else multisynth4
- 2 = xtal
- 3 = clkin (si5351c only)
-- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
-- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
- divider.
-- silabs,pll-master: boolean, multisynth can change pll frequency.
-- silabs,pll-reset: boolean, clock output can reset its pll.
-- silabs,disable-state : clock output disable state, shall be
- 0 = clock output is driven LOW when disabled
- 1 = clock output is driven HIGH when disabled
- 2 = clock output is FLOATING (HIGH-Z) when disabled
- 3 = clock output is NEVER disabled
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25M {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
- /* Si5351a msop10 i2c clock generator */
- si5351a: clock-generator@60 {
- compatible = "silabs,si5351a-msop";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
- #clock-cells = <1>;
-
- /* connect xtal input to 25MHz reference */
- clocks = <&ref25>;
- clock-names = "xtal";
-
- /* connect xtal input as source of pll0 and pll1 */
- silabs,pll-source = <0 0>, <1 0>;
-
- /*
- * overwrite clkout0 configuration with:
- * - 8mA output drive strength
- * - pll0 as clock source of multisynth0
- * - multisynth0 as clock source of output divider
- * - multisynth0 can change pll0
- * - set initial clock frequency of 74.25MHz
- */
- clkout0 {
- reg = <0>;
- silabs,drive-strength = <8>;
- silabs,multisynth-source = <0>;
- silabs,clock-source = <0>;
- silabs,pll-master;
- clock-frequency = <74250000>;
- };
-
- /*
- * overwrite clkout1 configuration with:
- * - 4mA output drive strength
- * - pll1 as clock source of multisynth1
- * - multisynth1 as clock source of output divider
- * - multisynth1 can change pll1
- */
- clkout1 {
- reg = <1>;
- silabs,drive-strength = <4>;
- silabs,multisynth-source = <1>;
- silabs,clock-source = <0>;
- pll-master;
- };
-
- /*
- * overwrite clkout2 configuration with:
- * - xtal as clock source of output divider
- */
- clkout2 {
- reg = <2>;
- silabs,clock-source = <2>;
- };
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si5351A/B/C programmable I2C clock generators
+
+description: |
+ The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to
+ 8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3
+ output clocks are accessible. The internal structure of the clock generators
+ can be found in [1].
+
+ [1] Si5351A/B/C Data Sheet
+ https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+maintainers:
+ - Alvin Šipraga <alsi@bang-olufsen.dk>
+
+properties:
+ compatible:
+ enum:
+ - silabs,si5351a # Si5351A, 20-QFN package
+ - silabs,si5351a-msop # Si5351A, 10-MSOP package
+ - silabs,si5351b # Si5351B, 20-QFN package
+ - silabs,si5351c # Si5351C, 20-QFN package
+
+ reg:
+ enum:
+ - 0x60
+ - 0x61
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: xtal
+ - const: clkin
+
+ silabs,pll-source:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ A list of cell pairs containing a PLL index and its source. Allows to
+ overwrite clock source of the internal PLLs.
+ items:
+ items:
+ - description: PLL A (0) or PLL B (1)
+ enum: [ 0, 1 ]
+ - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only).
+ enum: [ 0, 1 ]
+
+ silabs,pll-reset-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 1
+ maxItems: 2
+ description: A list of cell pairs containing a PLL index and its reset mode.
+ items:
+ items:
+ - description: PLL A (0) or PLL B (1)
+ enum: [ 0, 1 ]
+ - description: |
+ Reset mode for the PLL. Mode can be one of:
+
+ 0 - reset whenever PLL rate is adjusted (default mode)
+ 1 - do not reset when PLL rate is adjusted
+
+ In mode 1, the PLL is only reset if the silabs,pll-reset is
+ specified in one of the clock output child nodes that also sources
+ the PLL. This mode may be preferable if output clocks are expected
+ to be adjusted without glitches.
+ enum: [ 0, 1 ]
+
+patternProperties:
+ "^clkout@[0-7]$":
+ type: object
+
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: Clock output number.
+
+ clock-frequency: true
+
+ silabs,clock-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Source clock of the this output's divider stage.
+
+ 0 - use multisynth N for this output, where N is the output number
+ 1 - use either multisynth 0 (if output number is 0-3) or multisynth 4
+ (otherwise) for this output
+ 2 - use XTAL for this output
+ 3 - use CLKIN for this output (Si5351C only)
+
+ silabs,drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 2, 4, 6, 8 ]
+ description: Output drive strength in mA.
+
+ silabs,multisynth-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Source PLL A (0) or B (1) for the corresponding multisynth divider.
+
+ silabs,pll-master:
+ type: boolean
+ description: |
+ The frequency of the source PLL is allowed to be changed by the
+ multisynth when setting the rate of this clock output.
+
+ silabs,pll-reset:
+ type: boolean
+ description: Reset the source PLL when enabling this clock output.
+
+ silabs,disable-state:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+ description: |
+ Clock output disable state. The state can be one of:
+
+ 0 - clock output is driven LOW when disabled
+ 1 - clock output is driven HIGH when disabled
+ 2 - clock output is FLOATING (HIGH-Z) when disabled
+ 3 - clock output is never disabled
+
+ allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: silabs,si5351a-msop
+ then:
+ properties:
+ reg:
+ maximum: 2
+ else:
+ properties:
+ reg:
+ maximum: 7
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: silabs,si5351c
+ then:
+ properties:
+ silabs,clock-source:
+ enum: [ 0, 1, 2, 3 ]
+ else:
+ properties:
+ silabs,clock-source:
+ enum: [ 0, 1, 2 ]
+
+ required:
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - silabs,si5351a
+ - silabs,si5351a-msop
+ - silabs,si5351b
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+
+required:
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-generator@60 {
+ compatible = "silabs,si5351a-msop";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ /* Connect XTAL input to 25MHz reference */
+ clocks = <&ref25>;
+ clock-names = "xtal";
+
+ /* Use XTAL input as source of PLL0 and PLL1 */
+ silabs,pll-source = <0 0>, <1 0>;
+
+ /* Don't reset PLL1 on rate adjustment */
+ silabs,pll-reset-mode = <1 1>;
+
+ /*
+ * Overwrite CLK0 configuration with:
+ * - 8 mA output drive strength
+ * - PLL0 as clock source of multisynth 0
+ * - Multisynth 0 as clock source of output divider
+ * - Multisynth 0 can change PLL0
+ * - Set initial clock frequency of 74.25MHz
+ */
+ clkout@0 {
+ reg = <0>;
+ silabs,drive-strength = <8>;
+ silabs,multisynth-source = <0>;
+ silabs,clock-source = <0>;
+ silabs,pll-master;
+ clock-frequency = <74250000>;
+ };
+
+ /*
+ * Overwrite CLK1 configuration with:
+ * - 4 mA output drive strength
+ * - PLL1 as clock source of multisynth 1
+ * - Multisynth 1 as clock source of output divider
+ * - Multisynth 1 can change PLL1
+ * - Reset PLL1 when enabling this clock output
+ */
+ clkout@1 {
+ reg = <1>;
+ silabs,drive-strength = <4>;
+ silabs,multisynth-source = <1>;
+ silabs,clock-source = <0>;
+ silabs,pll-master;
+ silabs,pll-reset;
+ };
+
+ /*
+ * Overwrite CLK2 configuration with:
+ * - XTAL as clock source of output divider
+ */
+ clkout@2 {
+ reg = <2>;
+ silabs,clock-source = <2>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Series Clock Controller
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ enum:
+ - sophgo,cv1800-clk
+ - sophgo,cv1810-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+ description:
+ See <dt-bindings/clock/sophgo,cv1800.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@3002000 {
+ compatible = "sophgo,cv1800-clk";
+ reg = <0x03002000 0x1000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 Reset Clock Controller
+
+maintainers:
+ - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+ The RCC hardware block is both a reset and a clock controller.
+ RCC makes also power management (resume/supend).
+
+ See also::
+ include/dt-bindings/clock/st,stm32mp25-rcc.h
+ include/dt-bindings/reset/st,stm32mp25-rcc.h
+
+properties:
+ compatible:
+ enum:
+ - st,stm32mp25-rcc
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: CK_SCMI_HSE High Speed External oscillator (8 to 48 MHz)
+ - description: CK_SCMI_HSI High Speed Internal oscillator (~ 64 MHz)
+ - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
+ - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
+ - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+
+ clock-names:
+ items:
+ - const: hse
+ - const: hsi
+ - const: msi
+ - const: lse
+ - const: lsi
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+
+ rcc: clock-controller@44200000 {
+ compatible = "st,stm32mp25-rcc";
+ reg = <0x44200000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-names = "hse", "hsi", "msi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_MSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+ };
+...
- xlnx,clocking-wizard
- xlnx,clocking-wizard-v5.2
- xlnx,clocking-wizard-v6.0
+ - xlnx,versal-clk-wizard
reg:
clocks:
description: List of clock specifiers which are external input
clocks to the given clock controller.
- minItems: 3
+ minItems: 2
maxItems: 8
clock-names:
- minItems: 3
+ minItems: 2
maxItems: 8
required:
clocks:
items:
- description: reference clock
- - description: alternate reference clock
- description: alternate reference clock for programmable logic
clock-names:
items:
- const: ref
- - const: alt_ref
- const: pl_alt_ref
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,versal-net-clk
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: reference clock
+ - description: alternate reference clock for programmable logic
+ - description: alternate reference clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: pl_alt_ref
+ - const: alt_ref
+
- if:
properties:
compatible:
versal_clk: clock-controller {
#clock-cells = <1>;
compatible = "xlnx,versal-clk";
- clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
- clock-names = "ref", "alt_ref", "pl_alt_ref";
+ clocks = <&ref>, <&pl_alt_ref>;
+ clock-names = "ref", "pl_alt_ref";
};
};
};
Particularly, if use an output GPIO to control a VBUS regulator, should
model it as a regulator. See bindings/regulator/fixed-regulator.yaml
- # The following are optional properties for "usb-c-connector".
power-role:
description: Determines the power role that the Type C connector will
support. "dual" refers to Dual Role Port (DRP).
# The following are optional properties for "usb-c-connector" with power
# delivery support.
- source-pdos:
- description: An array of u32 with each entry providing supported power
- source data object(PDO), the detailed bit definitions of PDO can be found
- in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
- Source_Capabilities Message, the order of each entry(PDO) should follow
- the PD spec chapter 6.4.1. Required for power source and power dual role.
- User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
- defined in dt-bindings/usb/pd.h.
- minItems: 1
- maxItems: 7
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
- sink-pdos:
- description: An array of u32 with each entry providing supported power sink
- data object(PDO), the detailed bit definitions of PDO can be found in
- "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
- Sink Capabilities Message, the order of each entry(PDO) should follow the
- PD spec chapter 6.4.1. Required for power sink and power dual role. User
- can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
- in dt-bindings/usb/pd.h.
- minItems: 1
- maxItems: 7
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
sink-vdos:
description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
providing additional information corresponding to the product, the detailed bit
maxItems: 6
$ref: /schemas/types.yaml#/definitions/uint32-array
- op-sink-microwatt:
- description: Sink required operating power in microwatt, if source can't
- offer the power, Capability Mismatch is set. Required for power sink and
- power dual role.
+ accessory-mode-audio:
+ type: boolean
+ description: Whether the device supports Audio Adapter Accessory Mode. This
+ is only necessary if there are no other means to discover supported
+ alternative modes (e.g. through the UCSI firmware interface).
+
+ accessory-mode-debug:
+ type: boolean
+ description: Whether the device supports Debug Accessory Mode. This
+ is only necessary if there are no other means to discover supported
+ alternative modes (e.g. through the UCSI firmware interface).
+
+ altmodes:
+ type: object
+ description: List of Alternative Modes supported by the schematics on the
+ particular device. This is only necessary if there are no other means to
+ discover supported alternative modes (e.g. through the UCSI firmware
+ interface).
+
+ additionalProperties: false
+
+ patternProperties:
+ "^(displayport)$":
+ type: object
+ description:
+ A single USB-C Alternative Mode as supported by the USB-C connector logic.
+
+ additionalProperties: false
+
+ properties:
+ svid:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description: Unique value assigned by USB-IF to the Vendor / AltMode.
+ enum: [ 0xff01 ]
+ vdo:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: VDO returned by Discover Modes USB PD command.
port:
$ref: /schemas/graph.yaml#/properties/port
SNK_READY for non-pd link.
type: boolean
+ capabilities:
+ description: A child node to contain all the selectable USB Power Delivery capabilities.
+ type: object
+
+ patternProperties:
+ "^caps-[0-9]+$":
+ description: Child nodes under "capabilities" node. Each node contains a selectable USB
+ Power Delivery capability.
+ type: object
+ $ref: "#/$defs/capabilities"
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
dependencies:
sink-vdos-v1: [ sink-vdos ]
sink-vdos: [ sink-vdos-v1 ]
required:
- compatible
+$defs:
+ capabilities:
+ type: object
+
+ properties:
+ source-pdos:
+ description: An array of u32 with each entry providing supported power
+ source data object(PDO), the detailed bit definitions of PDO can be found
+ in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+ Source_Capabilities Message, the order of each entry(PDO) should follow
+ the PD spec chapter 6.4.1. Required for power source and power dual role.
+ User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+ defined in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ sink-pdos:
+ description: An array of u32 with each entry providing supported power sink
+ data object(PDO), the detailed bit definitions of PDO can be found in
+ "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+ Sink Capabilities Message, the order of each entry(PDO) should follow the
+ PD spec chapter 6.4.1. Required for power sink and power dual role. User
+ can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+ in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ op-sink-microwatt:
+ description: Sink required operating power in microwatt, if source can't
+ offer the power, Capability Mismatch is set. Required for power sink and
+ power dual role.
+
allOf:
+ - $ref: "#/$defs/capabilities"
- if:
properties:
compatible:
- typec-power-opmode
- new-source-frs-typec-current
-additionalProperties: false
+unevaluatedProperties: false
examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
compatible = "usb-c-connector";
label = "USB-C";
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
just supports idle_standby, an idle-states node is not required.
===========================================
- 6 - References
+ 6 - Qualcomm specific STATES
+ ===========================================
+
+ Idle states have different enter/exit latency and residency values.
+ The idle states supported by the QCOM SoC are defined as -
+
+ * Standby
+ * Retention
+ * Standalone Power Collapse (Standalone PC or SPC)
+ * Power Collapse (PC)
+
+ Standby: Standby does a little more in addition to architectural clock gating.
+ When the WFI instruction is executed the ARM core would gate its internal
+ clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+ trigger to execute the SPM state machine. The SPM state machine waits for the
+ interrupt to trigger the core back in to active. This triggers the cache
+ hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+ the SPM state machine out of its wait, the next step is to ensure that the
+ cache hierarchy is also out of standby, and then the cpu is allowed to resume
+ execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+ driver and is not defined in the DT. The SPM state machine should be
+ configured to execute this state by default and after executing every other
+ state below.
+
+ Retention: Retention is a low power state where the core is clock gated and
+ the memory and the registers associated with the core are retained. The
+ voltage may be reduced to the minimum value needed to keep the processor
+ registers active. The SPM should be configured to execute the retention
+ sequence and would wait for interrupt, before restoring the cpu to execution
+ state. Retention may have a slightly higher latency than Standby.
+
+ Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+ between the time it enters idle and the next known wake up. SPC mode is used
+ to indicate a core entering a power down state without consulting any other
+ cpu or the system resources. This helps save power only on that core. The SPM
+ sequence for this idle state is programmed to power down the supply to the
+ core, wait for the interrupt, restore power to the core, and ensure the
+ system state including cache hierarchy is ready before allowing core to
+ resume. Applying power and resetting the core causes the core to warmboot
+ back into Elevation Level (EL) which trampolines the control back to the
+ kernel. Entering a power down state for the cpu, needs to be done by trapping
+ into a EL. Failing to do so, would result in a crash enforced by the warm boot
+ code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+ be flushed in s/w, before powering down the core.
+
+ Power Collapse: This state is similar to the SPC mode, but distinguishes
+ itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+ modes. In a hierarchical power domain SoC, this means L2 and other caches can
+ be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+ voltages reduced, provided all cpus enter this state. Since the span of low
+ power modes possible at this state is vast, the exit latency and the residency
+ of this low power mode would be considered high even though at a cpu level,
+ this essentially is cpu power down. The SPM in this state also may handshake
+ with the Resource power manager (RPM) processor in the SoC to indicate a
+ complete application processor subsystem shut down.
+
+ ===========================================
+ 7 - References
===========================================
[1] ARM Linux Kernel documentation - CPUs bindings
properties:
compatible:
- enum:
- - arm,idle-state
- - riscv,idle-state
+ oneOf:
+ - items:
+ - enum:
+ - qcom,idle-state-ret
+ - qcom,idle-state-spc
+ - qcom,idle-state-pc
+ - const: arm,idle-state
+ - enum:
+ - arm,idle-state
+ - riscv,idle-state
arm,psci-suspend-param:
$ref: /schemas/types.yaml#/definitions/uint32
};
};
+ // Example 4 - Qualcomm SPC
+ idle-states {
+ cpu_spc: cpu-spc {
+ compatible = "qcom,idle-state-spc", "arm,idle-state";
+ entry-latency-us = <150>;
+ exit-latency-us = <200>;
+ min-residency-us = <2000>;
+ };
+ };
...
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Inside Secure SafeXcel cryptographic engine
+
+maintainers:
+ - Antoine Tenart <atenart@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: inside-secure,safexcel-eip197b
+ - const: inside-secure,safexcel-eip197d
+ - const: inside-secure,safexcel-eip97ies
+ - const: inside-secure,safexcel-eip197
+ description: Equivalent of inside-secure,safexcel-eip197b
+ deprecated: true
+ - const: inside-secure,safexcel-eip97
+ description: Equivalent of inside-secure,safexcel-eip97ies
+ deprecated: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 6
+
+ interrupt-names:
+ items:
+ - const: ring0
+ - const: ring1
+ - const: ring2
+ - const: ring3
+ - const: eip
+ - const: mem
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: reg
+
+required:
+ - reg
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - if:
+ properties:
+ clocks:
+ minItems: 2
+ then:
+ properties:
+ clock-names:
+ minItems: 2
+ required:
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ crypto@800000 {
+ compatible = "inside-secure,safexcel-eip197b";
+ reg = <0x800000 0x200000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem";
+ clocks = <&cpm_syscon0 1 26>;
+ clock-names = "core";
+ };
+++ /dev/null
-Inside Secure SafeXcel cryptographic engine
-
-Required properties:
-- compatible: Should be "inside-secure,safexcel-eip197b",
- "inside-secure,safexcel-eip197d" or
- "inside-secure,safexcel-eip97ies".
-- reg: Base physical address of the engine and length of memory mapped region.
-- interrupts: Interrupt numbers for the rings and engine.
-- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
-
-Optional properties:
-- clocks: Reference to the crypto engine clocks, the second clock is
- needed for the Armada 7K/8K SoCs.
-- clock-names: mandatory if there is a second clock, in this case the
- name must be "core" for the first clock and "reg" for
- the second one.
-
-Backward compatibility:
-Two compatibles are kept for backward compatibility, but shouldn't be used for
-new submissions:
-- "inside-secure,safexcel-eip197" is equivalent to
- "inside-secure,safexcel-eip197b".
-- "inside-secure,safexcel-eip97" is equivalent to
- "inside-secure,safexcel-eip97ies".
-
-Example:
-
- crypto: crypto@800000 {
- compatible = "inside-secure,safexcel-eip197b";
- reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
- "eip";
- clocks = <&cpm_syscon0 1 26>;
- };
- qcom,sa8775p-inline-crypto-engine
- qcom,sm8450-inline-crypto-engine
- qcom,sm8550-inline-crypto-engine
+ - qcom,sm8650-inline-crypto-engine
- const: qcom,inline-crypto-engine
reg:
- qcom,sc7280-trng
- qcom,sm8450-trng
- qcom,sm8550-trng
+ - qcom,sm8650-trng
- const: qcom,trng
reg:
- items:
- enum:
+ - qcom,sc7280-qce
- qcom,sm8250-qce
- qcom,sm8350-qce
- qcom,sm8450-qce
- qcom,sm8550-qce
+ - qcom,sm8650-qce
- const: qcom,sm8150-qce
- const: qcom,qce
- qcom,crypto-v5.4
- qcom,ipq6018-qce
- qcom,ipq8074-qce
+ - qcom,ipq9574-qce
- qcom,msm8996-qce
- qcom,sdm845-qce
then:
- clocks
- clock-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8150-qce
+ then:
+ properties:
+ clocks: false
+ clock-names: false
+
required:
- compatible
- reg
- port@0
- port@1
+ vcchdmipll-supply:
+ description: A 1.8V supply that powers the HDMI PLL.
+
+ vcchdmitx-supply:
+ description: A 1.8V supply that powers the HDMI TX part.
+
+ vcclvdspll-supply:
+ description: A 1.8V supply that powers the LVDS PLL.
+
+ vcclvdstx-supply:
+ description: A 1.8V supply that powers the LVDS TX part.
+
+ vccmipirx-supply:
+ description: A 1.8V supply that powers the MIPI RX part.
+
+ vccsysclk-supply:
+ description: A 1.8V supply that powers the SYSCLK.
+
+ vdd-supply:
+ description: A 1.8V supply that powers the digital part.
+
required:
- compatible
- reg
audio-ports:
description:
- Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+ Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
The implementation allows one or two DAIs.
If two DAIs are defined, they must be of different type.
$ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 1
+ maxItems: 2
items:
- minItems: 1
items:
- description: |
The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
(see include/dt-bindings/display/tda998x.h).
+ enum: [ 1, 2 ]
- description:
The second value defines the tda998x AP_ENA reg content when the
DAI in question is used.
+ maximum: 0xff
'#sound-dai-cells':
enum: [ 0, 1 ]
- enum:
- mediatek,mt8173-disp-aal
- mediatek,mt8183-disp-aal
+ - mediatek,mt8195-mdp3-aal
- items:
- enum:
- mediatek,mt2712-disp-aal
- mediatek,mt2701-disp-color
- mediatek,mt8167-disp-color
- mediatek,mt8173-disp-color
+ - mediatek,mt8195-mdp3-color
- items:
- enum:
- mediatek,mt7623-disp-color
- enum:
- mediatek,mt6795-dsi
- const: mediatek,mt8173-dsi
+ - items:
+ - enum:
+ - mediatek,mt8195-dsi
+ - const: mediatek,mt8183-dsi
reg:
maxItems: 1
properties:
compatible:
- const: mediatek,mt8195-disp-ethdr
+ oneOf:
+ - const: mediatek,mt8195-disp-ethdr
+ - items:
+ - const: mediatek,mt8188-disp-ethdr
+ - const: mediatek,mt8195-disp-ethdr
reg:
maxItems: 7
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek MDP RDMA
-
-maintainers:
- - Chun-Kuang Hu <chunkuang.hu@kernel.org>
- - Philipp Zabel <p.zabel@pengutronix.de>
-
-description:
- The MediaTek MDP RDMA stands for Read Direct Memory Access.
- It provides real time data to the back-end panel driver, such as DSI,
- DPI and DP_INTF.
- It contains one line buffer to store the sufficient pixel data.
- RDMA device node must be siblings to the central MMSYS_CONFIG node.
- For a description of the MMSYS_CONFIG binding, see
- Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
-
-properties:
- compatible:
- const: mediatek,mt8195-vdo1-rdma
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: RDMA Clock
-
- iommus:
- maxItems: 1
-
- mediatek,gce-client-reg:
- description:
- The register of display function block to be set by gce. There are 4 arguments,
- such as gce node, subsys id, offset and register size. The subsys id that is
- mapping to the register of display function blocks is defined in the gce header
- include/dt-bindings/gce/<chip>-gce.h of each chips.
- $ref: /schemas/types.yaml#/definitions/phandle-array
- items:
- items:
- - description: phandle of GCE
- - description: GCE subsys id
- - description: register offset
- - description: register size
- maxItems: 1
-
-required:
- - compatible
- - reg
- - power-domains
- - clocks
- - iommus
- - mediatek,gce-client-reg
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt8195-clk.h>
- #include <dt-bindings/power/mt8195-power.h>
- #include <dt-bindings/gce/mt8195-gce.h>
- #include <dt-bindings/memory/mt8195-memory-port.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- rdma@1c104000 {
- compatible = "mediatek,mt8195-vdo1-rdma";
- reg = <0 0x1c104000 0 0x1000>;
- interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
- power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
- iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
- mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
- };
- };
- enum:
- mediatek,mt8173-disp-merge
- mediatek,mt8195-disp-merge
+ - mediatek,mt8195-mdp3-merge
- items:
- const: mediatek,mt6795-disp-merge
- const: mediatek,mt8173-disp-merge
+ - items:
+ - const: mediatek,mt8188-disp-merge
+ - const: mediatek,mt8195-disp-merge
reg:
maxItems: 1
- mediatek,mt8173-disp-ovl
- mediatek,mt8183-disp-ovl
- mediatek,mt8192-disp-ovl
+ - mediatek,mt8195-mdp3-ovl
- items:
- enum:
- mediatek,mt7623-disp-ovl
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+ Padding provides ability to add pixels to width and height of a layer with
+ specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+ width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+ we need Padding to deal with odd width.
+ Please notice that even if the Padding is in bypass mode, settings in
+ register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8188-disp-padding
+ - mediatek,mt8195-mdp3-padding
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Padding's clocks
+
+ mediatek,gce-client-reg:
+ description:
+ GCE (Global Command Engine) is a multi-core micro processor that helps
+ its clients to execute commands without interrupting CPU. This property
+ describes GCE client's information that is composed by 4 fields.
+ 1. Phandle of the GCE (there may be several GCE processors)
+ 2. Sub-system ID defined in the dt-binding like a user ID
+ (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+ 3. Offset from base address of the subsys you are at
+ 4. Size of the register the client needs
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: Phandle of the GCE
+ - description: Subsys ID defined in the dt-binding
+ - description: Offset from base address of the subsys
+ - description: Size of register
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+ #include <dt-bindings/power/mediatek,mt8188-power.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ padding0: padding@1c11d000 {
+ compatible = "mediatek,mt8188-disp-padding";
+ reg = <0 0x1c11d000 0 0x1000>;
+ clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+ power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+ };
+ };
oneOf:
- enum:
- mediatek,mt8173-disp-split
+ - mediatek,mt8195-mdp3-split
- items:
- const: mediatek,mt6795-disp-split
- const: mediatek,mt8173-disp-split
the power controller specified by phandle. See
Documentation/devicetree/bindings/power/power-domain.yaml for details.
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
clocks:
items:
- description: SPLIT Clock
- power-domains
- clocks
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8195-mdp3-split
+
+ then:
+ required:
+ - mediatek,gce-client-reg
+
additionalProperties: false
examples:
- qcom,sc8280xp-edp
- qcom,sdm845-dp
- qcom,sm8350-dp
+ - qcom,sm8650-dp
- items:
- enum:
+ - qcom,sm8150-dp
- qcom,sm8250-dp
- qcom,sm8450-dp
- qcom,sm8550-dp
- qcom,sc7180-dsi-ctrl
- qcom,sc7280-dsi-ctrl
- qcom,sdm660-dsi-ctrl
+ - qcom,sdm670-dsi-ctrl
- qcom,sdm845-dsi-ctrl
- qcom,sm6115-dsi-ctrl
- qcom,sm6125-dsi-ctrl
- qcom,sm8350-dsi-ctrl
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
+ - qcom,sm8650-dsi-ctrl
- const: qcom,mdss-dsi-ctrl
- enum:
- qcom,dsi-ctrl-6g-qcm2290
- qcom,sm8350-dsi-ctrl
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
+ - qcom,sm8650-dsi-ctrl
then:
properties:
clocks:
- qcom,sm8350-dsi-phy-5nm
- qcom,sm8450-dsi-phy-5nm
- qcom,sm8550-dsi-phy-4nm
+ - qcom,sm8650-dsi-phy-4nm
reg:
items:
ranges: true
+ # This is not a perfect description, but it's impossible to discern and match
+ # the entries like we do with interconnect-names
interconnects:
minItems: 1
items:
- description: Interconnect path from mdp0 (or a single mdp) port to the data bus
- description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- minItems: 1
- items:
- - const: mdp0-mem
- - const: mdp1-mem
+ oneOf:
+ - minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
+ - minItems: 2
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: cpu-cfg
resets:
items:
maxItems: 2
interconnects:
- maxItems: 1
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 1
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
properties:
compatible:
- const: qcom,dsi-ctrl-6g-qcm2290
+ items:
+ - const: qcom,qcm2290-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
"^phy@[0-9a-f]+$":
type: object
interrupt-controller;
#interrupt-cells = <1>;
- interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
+ interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>,
+ <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
iommus = <&apps_smmu 0x420 0x2>,
<&apps_smmu 0x421 0x0>;
};
dsi@5e94000 {
- compatible = "qcom,dsi-ctrl-6g-qcm2290";
+ compatible = "qcom,qcm2290-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
reg = <0x05e94000 0x400>;
reg-names = "dsi_ctrl";
maxItems: 1
interconnects:
- maxItems: 1
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 1
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
interrupt-controller;
#interrupt-cells = <1>;
- interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
iommus = <&apps_smmu 0x800 0x2>;
ranges;
maxItems: 1
interconnects:
- maxItems: 1
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 1
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
interrupt-controller;
#interrupt-cells = <1>;
- interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
iommus = <&apps_smmu 0x900 0x402>;
ranges;
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+ - Richard Acayan <mailingradian@gmail.com>
+
+description:
+ SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdm670-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ iommus:
+ maxItems: 2
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sdm670-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sdm670-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ contains:
+ const: qcom,sdm670-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sdm670-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x880 0x8>,
+ <&apps_smmu 0xc80 0x8>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sdm670-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SDM670_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM670_CX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM670_CX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
properties:
compatible:
- const: qcom,sdm845-dpu
+ enum:
+ - qcom,sdm670-dpu
+ - qcom,sdm845-dpu
reg:
items:
iommus:
maxItems: 2
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
maxItems: 1
interconnects:
- maxItems: 2
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 2
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
maxItems: 1
interconnects:
- maxItems: 2
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 2
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
maxItems: 1
interconnects:
- maxItems: 2
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
interconnect-names:
- maxItems: 2
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
patternProperties:
"^display-controller@[0-9a-f]+$":
properties:
compatible:
- const: qcom,dsi-phy-7nm
+ const: qcom,dsi-phy-7nm-8150
unevaluatedProperties: false
};
dsi0_phy: phy@ae94400 {
- compatible = "qcom,dsi-phy-7nm";
+ compatible = "qcom,dsi-phy-7nm-8150";
reg = <0x0ae94400 0x200>,
<0x0ae94600 0x280>,
<0x0ae94900 0x260>;
};
dsi1_phy: phy@ae96400 {
- compatible = "qcom,dsi-phy-7nm";
+ compatible = "qcom,dsi-phy-7nm-8150";
reg = <0x0ae96400 0x200>,
<0x0ae96600 0x280>,
<0x0ae96900 0x260>;
compatible:
const: qcom,sm8250-dpu
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8250-dp
+ - const: qcom,sm8350-dp
+
"^dsi@[0-9a-f]+$":
type: object
additionalProperties: true
maxItems: 1
interconnects:
- maxItems: 2
+ maxItems: 3
interconnect-names:
- maxItems: 2
+ maxItems: 3
patternProperties:
"^display-controller@[0-9a-f]+$":
reg = <0x0ae00000 0x1000>;
reg-names = "mdss";
- interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
- <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
- interconnect-names = "mdp0-mem", "mdp1-mem";
+ interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+ <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display DPU
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8650-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi
+ - description: Display MDSS ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8650-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_axi_clk>,
+ <&dispcc_ahb_clk>,
+ <&dispcc_mdp_lut_clk>,
+ <&dispcc_mdp_clk>,
+ <&dispcc_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display MDSS
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8650-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8650-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8650-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8650-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8650-dsi-phy-4nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8650-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ resets = <&dispcc_core_bcr>;
+
+ power-domains = <&dispcc_gdsc>;
+
+ clocks = <&gcc_ahb_clk>,
+ <&gcc_axi_clk>,
+ <&dispcc_mdp_clk>;
+ clock-names = "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8650-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_axi_clk>,
+ <&dispcc_ahb_clk>,
+ <&dispcc_mdp_lut_clk>,
+ <&dispcc_mdp_clk>,
+ <&dispcc_mdp_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdp_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispc_byte_clk>,
+ <&dispcc_intf_clk>,
+ <&dispcc_pclk>,
+ <&dispcc_esc_clk>,
+ <&dispcc_ahb_clk>,
+ <&gcc_bus_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_byte_clk>,
+ <&dispcc_pclk>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_iface_clk>,
+ <&rpmhcc_ref_clk>;
+ clock-names = "iface", "ref";
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispc_byte_clk>,
+ <&dispcc_intf_clk>,
+ <&dispcc_pclk>,
+ <&dispcc_esc_clk>,
+ <&dispcc_ahb_clk>,
+ <&gcc_bus_clk>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc_byte_clk>,
+ <&dispcc_pclk>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc_iface_clk>,
+ <&rpmhcc_ref_clk>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - John Watts <contact@jookia.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: fascontek,fs035vg158
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - port
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "fascontek,fs035vg158";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
items:
- enum:
- hannstar,hsd060bhw4
+ - powkiddy,x55-panel
- const: himax,hx8394
reg: true
backlight: true
+ rotation: true
+
port: true
vcc-supply:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+ - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - giantplus,gpm1790a0
+ - tianma,tm041xdhg01
+ - const: ilitek,ili9805
+
+ avdd-supply: true
+ dvdd-supply: true
+ reg: true
+
+required:
+ - compatible
+ - avdd-supply
+ - dvdd-supply
+ - reg
+ - reset-gpios
+ - port
+ - backlight
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+ reg = <0>;
+ avdd-supply = <&avdd_display>;
+ dvdd-supply = <&dvdd_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+ };
+
+...
compatible:
items:
- enum:
+ - ampire,am8001280g
- bananapi,lhr050h41
- feixin,k101-im2byl02
- tdo,tl050hdv35
compatible:
const: leadtek,ltk035c5444t
- backlight: true
- port: true
- power-supply: true
- reg: true
- reset-gpios: true
-
spi-3wire: true
required:
- compatible
+ - reg
+ - port
- power-supply
- reset-gpios
- enum:
- anbernic,rg351v-panel
- anbernic,rg353p-panel
- - anbernic,rg353v-panel
+ - powkiddy,rk2023-panel
- const: newvision,nv3051d
reg: true
# AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
- auo,g133han01
+ # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+ - auo,g156han04
# AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
- auo,g185han01
# AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
- auo,t215hvn01
# Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
- avic,tm070ddh03
+ # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
+ - boe,bp101wx1-100
# BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
- boe,ev121wxm-n10-1850
# BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
- edt,etmv570g2dhu
# E Ink VB3300-KCA
- eink,vb3300-kca
+ # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel
+ - evervision,vgg644804
# Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
- evervision,vgg804821
# Foxlink Group 5" WVGA TFT LCD panel
compatible:
items:
- enum:
+ - anbernic,rg-arc-panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+ - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sharp,ls068b3sx02
+ - const: syna,r63353
+
+ avdd-supply: true
+ dvdd-supply: true
+ reg: true
+
+required:
+ - compatible
+ - avdd-supply
+ - dvdd-supply
+ - reg
+ - reset-gpios
+ - port
+ - backlight
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls068b3sx02", "syna,r63353";
+ reg = <0>;
+ avdd-supply = <&avdd_display>;
+ dvdd-supply = <&dvdd_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+ };
+
+...
+++ /dev/null
-Rockchip specific extensions to the Innosilicon HDMI
-================================
-
-Required properties:
-- compatible:
- "rockchip,rk3036-inno-hdmi";
-- reg:
- Physical base address and length of the controller's registers.
-- clocks, clock-names:
- Phandle to hdmi controller clock, name should be "pclk"
-- interrupts:
- HDMI interrupt number
-- ports:
- Contain one port node with endpoint definitions as defined in
- Documentation/devicetree/bindings/graph.txt.
-- pinctrl-0, pinctrl-name:
- Switch the iomux of HPD/CEC pins to HDMI function.
-
-Example:
-hdmi: hdmi@20034000 {
- compatible = "rockchip,rk3036-inno-hdmi";
- reg = <0x20034000 0x4000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_HDMI>;
- clock-names = "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_ctl>;
-
- hdmi_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
- hdmi_in_lcdc: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&lcdc_out_hdmi>;
- };
- };
-};
-
-&pinctrl {
- hdmi {
- hdmi_ctl: hdmi-ctl {
- rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
- <1 9 RK_FUNC_1 &pcfg_pull_none>,
- <1 10 RK_FUNC_1 &pcfg_pull_none>,
- <1 11 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
-};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Innosilicon HDMI controller
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3036-inno-hdmi
+ - rockchip,rk3128-inno-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: The HDMI controller main clock
+ - description: The HDMI PHY reference clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: pclk
+ - const: ref
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a vop node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a hdmi-connector node.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pinctrl-0
+ - pinctrl-names
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3036-inno-hdmi
+
+ then:
+ properties:
+ power-domains: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3128-inno-hdmi
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ minItems: 2
+ required:
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3036-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+ hdmi: hdmi@20034000 {
+ compatible = "rockchip,rk3036-inno-hdmi";
+ reg = <0x20034000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>;
+ clock-names = "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ctl>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ hdmi {
+ hdmi_ctl: hdmi-ctl {
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+ <1 RK_PB1 1 &pcfg_pull_none>,
+ <1 RK_PB2 1 &pcfg_pull_none>,
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+ };
+ };
description:
VOP2 (Video Output Processor v2) is the display controller for the Rockchip
- series of SoCs which transfers the image data from a video memory
- buffer to an external LCD interface.
+ series of SoCs which transfers the image data from a video memory buffer to
+ an external LCD interface.
maintainers:
- Sandy Huang <hjc@rock-chips.com>
enum:
- rockchip,rk3566-vop
- rockchip,rk3568-vop
+ - rockchip,rk3588-vop
reg:
items:
Must contain one entry corresponding to the base address and length
of the register space.
- description:
- Can optionally contain a second entry corresponding to
- the CRTC gamma LUT address.
+ Can optionally contain a second entry corresponding to the CRTC gamma
+ LUT address.
reg-names:
items:
The VOP interrupt is shared by several interrupt sources, such as
frame start (VSYNC), line flag and other status interrupts.
+ # See compatible-specific constraints below.
clocks:
+ minItems: 5
items:
- - description: Clock for ddr buffer transfer.
- - description: Clock for the ahb bus to R/W the phy regs.
+ - description: Clock for ddr buffer transfer via axi.
+ - description: Clock for the ahb bus to R/W the regs.
- description: Pixel clock for video port 0.
- description: Pixel clock for video port 1.
- description: Pixel clock for video port 2.
+ - description: Pixel clock for video port 3.
+ - description: Peripheral(vop grf/dsi) clock.
clock-names:
+ minItems: 5
items:
- const: aclk
- const: hclk
- const: dclk_vp0
- const: dclk_vp1
- const: dclk_vp2
+ - const: dclk_vp3
+ - const: pclk_vop
rockchip,grf:
$ref: /schemas/types.yaml#/definitions/phandle
description:
- Phandle to GRF regs used for misc control
+ Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+ also used for query vop memory bisr enable status, etc.
+
+ rockchip,vo1-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+ on rk3588.
+
+ rockchip,vop-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+ rockchip,pmu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to PMU GRF used for query vop memory bisr status on rk3588.
ports:
$ref: /schemas/graph.yaml#/properties/ports
- properties:
- port@0:
+ patternProperties:
+ "^port@[0-3]$":
$ref: /schemas/graph.yaml#/properties/port
- description:
- Output endpoint of VP0
+ description: Output endpoint of VP0/1/2/3.
- port@1:
- $ref: /schemas/graph.yaml#/properties/port
- description:
- Output endpoint of VP1
+ required:
+ - port@0
- port@2:
- $ref: /schemas/graph.yaml#/properties/port
- description:
- Output endpoint of VP2
+ unevaluatedProperties: false
iommus:
maxItems: 1
- clock-names
- ports
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3588-vop
+ then:
+ properties:
+ clocks:
+ minItems: 7
+ clock-names:
+ minItems: 7
+
+ ports:
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+
+ required:
+ - rockchip,grf
+ - rockchip,vo1-grf
+ - rockchip,vop-grf
+ - rockchip,pmu
+
+ else:
+ properties:
+ rockchip,vo1-grf: false
+ rockchip,vop-grf: false
+ rockchip,pmu: false
+
+ clocks:
+ maxItems: 5
+ clock-names:
+ maxItems: 5
+
+ ports:
+ required:
+ - port@0
+ - port@1
+ - port@2
+
additionalProperties: false
examples:
clocks:
minItems: 6
maxItems: 6
- regs:
+ reg:
minItems: 2
maxItems: 2
clocks:
minItems: 4
maxItems: 4
- regs:
+ reg:
minItems: 2
maxItems: 2
clocks:
minItems: 3
maxItems: 3
- regs:
+ reg:
minItems: 1
maxItems: 1
compatible:
enum:
- ti,am625-dss
+ - ti,am62a7,dss
- ti,am65x-dss
reg:
For AM65x DSS, the OLDI output port node from video port 1.
For AM625 DSS, the internal DPI output port node from video
port 1.
+ For AM62A7 DSS, the port is tied off inside the SoC.
port@1:
$ref: /schemas/graph.yaml#/properties/port
Input memory (from main memory to dispc) bandwidth limit in
bytes per second
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am62a7-dss
+ then:
+ properties:
+ ports:
+ properties:
+ port@0: false
+
required:
- compatible
- reg
additionalProperties: true
-examples:
- - |
- dma: dma-controller@48000000 {
- compatible = "ti,omap-sdma";
- reg = <0x48000000 0x1000>;
- interrupts = <0 12 0x4>,
- <0 13 0x4>,
- <0 14 0x4>,
- <0 15 0x4>;
- #dma-cells = <1>;
- dma-channels = <32>;
- dma-requests = <127>;
- dma-channel-mask = <0xfffe>;
- };
-
...
additionalProperties: true
-examples:
- - |
- sdma_xbar: dma-router@4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
- };
-
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X APB DMA controller
+
+description:
+ The Loongson LS2X APB DMA controller is used for transferring data
+ between system memory and the peripherals on the APB bus.
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: loongson,ls2k1000-apbdma
+ - items:
+ - const: loongson,ls2k0500-apbdma
+ - const: loongson,ls2k1000-apbdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#dma-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+ dma-controller@1fe00c00 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x1fe00c00 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ };
+
+...
ADMA_CHn_CTRL register.
const: 1
+ dma-channel-mask:
+ maxItems: 1
+
required:
- compatible
- reg
- qcom,sm8350-gpi-dma
- qcom,sm8450-gpi-dma
- qcom,sm8550-gpi-dma
+ - qcom,sm8650-gpi-dma
+ - qcom,x1e80100-gpi-dma
- const: qcom,sm6350-gpi-dma
- items:
- enum:
compatible:
items:
- enum:
- - renesas,r9a07g043-dmac # RZ/G2UL
+ - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
- renesas,r9a07g044-dmac # RZ/G2{L,LC}
- renesas,r9a07g054-dmac # RZ/V2L
- const: renesas,rz-dmac
compatible:
items:
- enum:
+ - microchip,mpfs-pdma
- sifive,fu540-c000-pdma
- const: sifive,pdma0
description:
reg:
minItems: 3
- maxItems: 5
+ maxItems: 9
reg-names:
minItems: 3
- maxItems: 5
+ maxItems: 9
"#dma-cells":
const: 3
ti,sci-rm-range-tchan: false
reg:
- maxItems: 3
+ items:
+ - description: BCDMA Control /Status Registers region
+ - description: RX Channel Realtime Registers region
+ - description: Ring Realtime Registers region
reg-names:
items:
properties:
reg:
minItems: 5
+ items:
+ - description: BCDMA Control /Status Registers region
+ - description: Block Copy Channel Realtime Registers region
+ - description: RX Channel Realtime Registers region
+ - description: TX Channel Realtime Registers region
+ - description: Ring Realtime Registers region
+ - description: Ring Configuration Registers region
+ - description: TX Channel Configuration Registers region
+ - description: RX Channel Configuration Registers region
+ - description: Block Copy Channel Configuration Registers region
reg-names:
+ minItems: 5
items:
- const: gcfg
- const: bchanrt
- const: rchanrt
- const: tchanrt
- const: ringrt
+ - const: ring
+ - const: tchan
+ - const: rchan
+ - const: bchan
required:
- ti,sci-rm-range-bchan
ti,sci-rm-range-bchan: false
reg:
- maxItems: 4
+ items:
+ - description: BCDMA Control /Status Registers region
+ - description: RX Channel Realtime Registers region
+ - description: TX Channel Realtime Registers region
+ - description: Ring Realtime Registers region
reg-names:
items:
<0x0 0x4c000000 0x0 0x20000>,
<0x0 0x4a820000 0x0 0x20000>,
<0x0 0x4aa40000 0x0 0x20000>,
- <0x0 0x4bc00000 0x0 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x0 0x4bc00000 0x0 0x100000>,
+ <0x0 0x48600000 0x0 0x8000>,
+ <0x0 0x484a4000 0x0 0x2000>,
+ <0x0 0x484c2000 0x0 0x2000>,
+ <0x0 0x48420000 0x0 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
The second cell is the ASEL value for the channel
reg:
- maxItems: 4
+ minItems: 4
+ items:
+ - description: Packet DMA Control /Status Registers region
+ - description: RX Channel Realtime Registers region
+ - description: TX Channel Realtime Registers region
+ - description: Ring Realtime Registers region
+ - description: Ring Configuration Registers region
+ - description: TX Configuration Registers region
+ - description: RX Configuration Registers region
+ - description: RX Flow Configuration Registers region
reg-names:
+ minItems: 4
items:
- const: gcfg
- const: rchanrt
- const: tchanrt
- const: ringrt
+ - const: ring
+ - const: tchan
+ - const: rchan
+ - const: rflow
msi-parent: true
reg = <0x0 0x485c0000 0x0 0x100>,
<0x0 0x4a800000 0x0 0x20000>,
<0x0 0x4aa00000 0x0 0x40000>,
- <0x0 0x4b800000 0x0 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x0 0x4b800000 0x0 0x400000>,
+ <0x0 0x485e0000 0x0 0x20000>,
+ <0x0 0x484a0000 0x0 0x4000>,
+ <0x0 0x484c0000 0x0 0x2000>,
+ <0x0 0x48430000 0x0 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
+
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
- ti,j721e-navss-mcu-udmap
reg:
- maxItems: 3
+ minItems: 3
+ items:
+ - description: UDMA-P Control /Status Registers region
+ - description: RX Channel Realtime Registers region
+ - description: TX Channel Realtime Registers region
+ - description: TX Configuration Registers region
+ - description: RX Configuration Registers region
+ - description: RX Flow Configuration Registers region
reg-names:
+ minItems: 3
items:
- const: gcfg
- const: rchanrt
- const: tchanrt
+ - const: tchan
+ - const: rchan
+ - const: rflow
msi-parent: true
compatible = "ti,am654-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x100000>,
+ <0x0 0x30b00000 0x0 0x20000>,
+ <0x0 0x30c00000 0x0 0x8000>,
+ <0x0 0x30d00000 0x0 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow";
#dma-cells = <1>;
ti,ringacc = <&ringacc>;
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Devicetree Sources (DTS) Coding Style
+=====================================
+
+When writing Devicetree Sources (DTS) please observe below guidelines. They
+should be considered complementary to any rules expressed already in
+the Devicetree Specification and the dtc compiler (including W=1 and W=2
+builds).
+
+Individual architectures and subarchitectures can define additional rules,
+making the coding style stricter.
+
+Naming and Valid Characters
+---------------------------
+
+The Devicetree Specification allows a broad range of characters in node
+and property names, but this coding style narrows the range down to achieve
+better code readability.
+
+1. Node and property names can use only the following characters:
+
+ * Lowercase characters: [a-z]
+ * Digits: [0-9]
+ * Dash: -
+
+2. Labels can use only the following characters:
+
+ * Lowercase characters: [a-z]
+ * Digits: [0-9]
+ * Underscore: _
+
+3. Unless a bus defines differently, unit addresses shall use lowercase
+ hexadecimal digits, without leading zeros (padding).
+
+4. Hex values in properties, e.g. "reg", shall use lowercase hex. The address
+ part can be padded with leading zeros.
+
+Example::
+
+ gpi_dma2: dma-controller@a00000 {
+ compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0x0 0x00a00000 0x0 0x60000>;
+ }
+
+Order of Nodes
+--------------
+
+1. Nodes on any bus, thus using unit addresses for children, shall be
+ ordered by unit address in ascending order.
+ Alternatively for some subarchitectures, nodes of the same type can be
+ grouped together, e.g. all I2C controllers one after another even if this
+ breaks unit address ordering.
+
+2. Nodes without unit addresses shall be ordered alpha-numerically by the node
+ name. For a few node types, they can be ordered by the main property, e.g.
+ pin configuration states ordered by value of "pins" property.
+
+3. When extending nodes in the board DTS via &label, the entries shall be
+ ordered either alpha-numerically or by keeping the order from DTSI, where
+ the choice depends on the subarchitecture.
+
+The above-described ordering rules are easy to enforce during review, reduce
+chances of conflicts for simultaneous additions of new nodes to a file and help
+in navigating through the DTS source.
+
+Example::
+
+ /* SoC DTSI */
+
+ / {
+ cpus {
+ /* ... */
+ };
+
+ psci {
+ /* ... */
+ };
+
+ soc@0 {
+ dma: dma-controller@10000 {
+ /* ... */
+ };
+
+ clk: clock-controller@80000 {
+ /* ... */
+ };
+ };
+ };
+
+ /* Board DTS - alphabetical order */
+
+ &clk {
+ /* ... */
+ };
+
+ &dma {
+ /* ... */
+ };
+
+ /* Board DTS - alternative order, keep as DTSI */
+
+ &dma {
+ /* ... */
+ };
+
+ &clk {
+ /* ... */
+ };
+
+Order of Properties in Device Node
+----------------------------------
+
+The following order of properties in device nodes is preferred:
+
+1. "compatible"
+2. "reg"
+3. "ranges"
+4. Standard/common properties (defined by common bindings, e.g. without
+ vendor-prefixes)
+5. Vendor-specific properties
+6. "status" (if applicable)
+7. Child nodes, where each node is preceded with a blank line
+
+The "status" property is by default "okay", thus it can be omitted.
+
+The above-described ordering follows this approach:
+
+1. Most important properties start the node: compatible then bus addressing to
+ match unit address.
+2. Each node will have common properties in similar place.
+3. Status is the last information to annotate that device node is or is not
+ finished (board resources are needed).
+
+Example::
+
+ /* SoC DTSI */
+
+ device_node: device-class@6789abc {
+ compatible = "vendor,device";
+ reg = <0x0 0x06789abc 0x0 0xa123>;
+ ranges = <0x0 0x0 0x06789abc 0x1000>;
+ #dma-cells = <1>;
+ clocks = <&clock_controller 0>, <&clock_controller 1>;
+ clock-names = "bus", "host";
+ vendor,custom-property = <2>;
+ status = "disabled";
+
+ child_node: child-class@100 {
+ reg = <0x100 0x200>;
+ /* ... */
+ };
+ };
+
+ /* Board DTS */
+
+ &device_node {
+ vdd-supply = <&board_vreg1>;
+ status = "okay";
+ }
+
+Indentation
+-----------
+
+1. Use indentation according to Documentation/process/coding-style.rst.
+2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses,
+ shall be enclosed in <>.
+3. For arrays spanning across lines, it is preferred to align the continued
+ entries with opening < from the first line.
+
+Example::
+
+ thermal-sensor@c271000 {
+ compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c271000 0x0 0x1000>,
+ <0x0 0x0c222000 0x0 0x1000>;
+ };
+
+Organizing DTSI and DTS
+-----------------------
+
+The DTSI and DTS files shall be organized in a way representing the common,
+reusable parts of hardware. Typically, this means organizing DTSI and DTS files
+into several files:
+
+1. DTSI with contents of the entire SoC, without nodes for hardware not present
+ on the SoC.
+2. If applicable: DTSI with common or re-usable parts of the hardware, e.g.
+ entire System-on-Module.
+3. DTS representing the board.
+
+Hardware components that are present on the board shall be placed in the
+board DTS, not in the SoC or SoM DTSI. A partial exception is a common
+external reference SoC input clock, which could be coded as a fixed-clock in
+the SoC DTSI with its frequency provided by each board DTS.
- enum:
- onnn,cat24c04
- onnn,cat24c05
+ - rohm,br24g04
- const: atmel,24c04
- items:
- const: renesas,r1ex24016
- qcom,scm-sm8350
- qcom,scm-sm8450
- qcom,scm-sm8550
+ - qcom,scm-sm8650
- qcom,scm-qcs404
+ - qcom,scm-x1e80100
- const: qcom,scm
clocks:
minItems: 3
maxItems: 3
- # Interconnects
- - if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - qcom,scm-qdu1000
- - qcom,scm-sc8280xp
- - qcom,scm-sm8450
- - qcom,scm-sm8550
- then:
- properties:
- interconnects: false
-
# Interrupts
- if:
not:
enum:
- qcom,scm-sm8450
- qcom,scm-sm8550
+ - qcom,scm-sm8650
then:
properties:
interrupts: false
versal_clk: clock-controller {
#clock-cells = <1>;
compatible = "xlnx,versal-clk";
- clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
- clock-names = "ref", "alt_ref", "pl_alt_ref";
+ clocks = <&ref>, <&pl_alt_ref>;
+ clock-names = "ref", "pl_alt_ref";
};
};
+++ /dev/null
-Altera FPGA To SDRAM Bridge Driver
-
-Required properties:
-- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
- fpga_bridge3: fpga-bridge@ffc25080 {
- compatible = "altr,socfpga-fpga2sdram-bridge";
- reg = <0xffc25080 0x4>;
- bridge-enable = <0>;
- };
+++ /dev/null
-Altera Freeze Bridge Controller Driver
-
-The Altera Freeze Bridge Controller manages one or more freeze bridges.
-The controller can freeze/disable the bridges which prevents signal
-changes from passing through the bridge. The controller can also
-unfreeze/enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Required properties:
-- compatible : Should contain "altr,freeze-bridge-controller"
-- regs : base address and size for freeze bridge module
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
- freeze-controller@100000450 {
- compatible = "altr,freeze-bridge-controller";
- regs = <0x1000 0x10>;
- bridge-enable = <0>;
- };
+++ /dev/null
-Altera FPGA/HPS Bridge Driver
-
-Required properties:
-- regs : base address and size for AXI bridge module
-- compatible : Should contain one of:
- "altr,socfpga-lwhps2fpga-bridge",
- "altr,socfpga-hps2fpga-bridge", or
- "altr,socfpga-fpga2hps-bridge"
-- resets : Phandle and reset specifier for this bridge's reset
-- clocks : Clocks used by this module.
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
- fpga_bridge0: fpga-bridge@ff400000 {
- compatible = "altr,socfpga-lwhps2fpga-bridge";
- reg = <0xff400000 0x100000>;
- resets = <&rst LWHPS2FPGA_RESET>;
- clocks = <&l4_main_clk>;
- bridge-enable = <0>;
- };
-
- fpga_bridge1: fpga-bridge@ff500000 {
- compatible = "altr,socfpga-hps2fpga-bridge";
- reg = <0xff500000 0x10000>;
- resets = <&rst HPS2FPGA_RESET>;
- clocks = <&l4_main_clk>;
- bridge-enable = <1>;
- };
-
- fpga_bridge2: fpga-bridge@ff600000 {
- compatible = "altr,socfpga-fpga2hps-bridge";
- reg = <0xff600000 0x100000>;
- resets = <&rst FPGA2HPS_RESET>;
- clocks = <&l4_main_clk>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,freeze-bridge-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Freeze Bridge Controller
+
+description:
+ The Altera Freeze Bridge Controller manages one or more freeze bridges.
+ The controller can freeze/disable the bridges which prevents signal
+ changes from passing through the bridge. The controller can also
+ unfreeze/enable the bridges which allows traffic to pass through the bridge
+ normally.
+
+maintainers:
+ - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+ - $ref: fpga-bridge.yaml#
+
+properties:
+ compatible:
+ const: altr,freeze-bridge-controller
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fpga-bridge@100000450 {
+ compatible = "altr,freeze-bridge-controller";
+ reg = <0x1000 0x10>;
+ bridge-enable = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-fpga2sdram-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA To SDRAM Bridge
+
+maintainers:
+ - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+ - $ref: fpga-bridge.yaml#
+
+properties:
+ compatible:
+ const: altr,socfpga-fpga2sdram-bridge
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fpga-bridge@ffc25080 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ reg = <0xffc25080 0x4>;
+ bridge-enable = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-hps2fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA/HPS Bridge
+
+maintainers:
+ - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+ - $ref: fpga-bridge.yaml#
+
+properties:
+ compatible:
+ enum:
+ - altr,socfpga-lwhps2fpga-bridge
+ - altr,socfpga-hps2fpga-bridge
+ - altr,socfpga-fpga2hps-bridge
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/altr,rst-mgr.h>
+
+ fpga-bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ bridge-enable = <0>;
+ clocks = <&l4_main_clk>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ };
+++ /dev/null
-FPGA Bridge Device Tree Binding
-
-Optional properties:
-- bridge-enable : 0 if driver should disable bridge at startup
- 1 if driver should enable bridge at startup
- Default is to leave bridge in current state.
-
-Example:
- fpga_bridge3: fpga-bridge@ffc25080 {
- compatible = "altr,socfpga-fpga2sdram-bridge";
- reg = <0xffc25080 0x4>;
- bridge-enable = <0>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Bridge
+
+maintainers:
+ - Michal Simek <michal.simek@amd.com>
+
+properties:
+ $nodename:
+ pattern: "^fpga-bridge(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+ bridge-enable:
+ description: |
+ 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+
+additionalProperties: true
+
+examples:
+ - |
+ fpga-bridge {
+ bridge-enable = <0>;
+ };
maintainers:
- Nava kishore Manne <nava.kishore.manne@amd.com>
+allOf:
+ - $ref: fpga-bridge.yaml#
+
description: |
The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
decouplers/fpga bridges. The controller can decouple/disable the bridges
- clocks
- clock-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
port or the USB host-controller port to which this device is attached,
depending on the bus used. Required for the DDC, SPI or USB busses.
+ reset-gpios:
+ maxItems: 1
+
vcc-supply:
description: >
Main voltage regulator
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+
serial {
gnss {
compatible = "u-blox,neo-8";
v-bckp-supply = <&gnss_v_bckp_reg>;
vcc-supply = <&gnss_vcc_reg>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
- reg
- gpio-controller
- "#gpio-cells"
- - "brcm,gpio-bank-widths"
+ - brcm,gpio-bank-widths
additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+ - Jim LIU <JJLIU0@nuvoton.com>
+
+description: |
+ This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed
+ information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section.
+ Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595)
+ and a parallel to serial IC (HC165).
+ Clock is a division of the APB3 clock.
+ This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+ NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up
+ to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO.
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity options (level-high, level-low, edge-high, edge-low)
+ - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+ nuvoton,input-ngpios GPIO lines is only for GPI.
+ nuvoton,output-ngpios GPIO lines is only for GPO.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-sgpio
+ - nuvoton,npcm845-sgpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,input-ngpios:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The numbers of GPIO's exposed. GPIO lines are only for GPI.
+ minimum: 0
+ maximum: 64
+
+ nuvoton,output-ngpios:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The numbers of GPIO's exposed. GPIO lines are only for GPO.
+ minimum: 0
+ maximum: 64
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - nuvoton,input-ngpios
+ - nuvoton,output-ngpios
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio8: gpio@101000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x101000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ nuvoton,input-ngpios = <64>;
+ nuvoton,output-ngpios = <64>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC GPIO controller
+
+maintainers:
+ - Tzuyi Chang <tychang@realtek.com>
+
+description:
+ The GPIO controller is designed for the Realtek DHC (Digital Home Center)
+ RTD series SoC family, which are high-definition media processor SoCs.
+
+properties:
+ compatible:
+ enum:
+ - realtek,rtd1295-misc-gpio
+ - realtek,rtd1295-iso-gpio
+ - realtek,rtd1315e-iso-gpio
+ - realtek,rtd1319-iso-gpio
+ - realtek,rtd1319d-iso-gpio
+ - realtek,rtd1395-iso-gpio
+ - realtek,rtd1619-iso-gpio
+ - realtek,rtd1619b-iso-gpio
+
+ reg:
+ items:
+ - description: GPIO controller registers
+ - description: GPIO interrupt registers
+
+ interrupts:
+ items:
+ - description: Interrupt number of the assert GPIO interrupt, which is
+ triggered when there is a rising edge.
+ - description: Interrupt number of the deassert GPIO interrupt, which is
+ triggered when there is a falling edge.
+
+ gpio-ranges: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-ranges
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@100 {
+ compatible = "realtek,rtd1319d-iso-gpio";
+ reg = <0x100 0x100>,
+ <0x0 0xb0>;
+ interrupt-parent = <&iso_irq_mux>;
+ interrupts = <19>, <20>;
+ gpio-ranges = <&pinctrl 0 0 82>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
"#interrupt-cells":
const: 2
+patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
required:
- compatible
- reg
minItems: 1
maxItems: 32
+ gpio-ranges: true
+
ngpios:
default: 32
minimum: 1
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- gpio@e000a000 {
+ gpio@a0020000 {
compatible = "xlnx,xps-gpio-1.00.a";
reg = <0xa0020000 0x10000>;
#gpio-cells = <2>;
PS_MODE). Every pin can be configured as input/output.
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
properties:
compatible:
"#gpio-cells":
const: 2
+ label: true
+
required:
- compatible
- gpio-controller
compatible = "xlnx,zynqmp-gpio-modepin";
gpio-controller;
#gpio-cells = <2>;
+ label = "modepin";
};
};
- rockchip,rk3288-mali
- samsung,exynos5433-mali
- const: arm,mali-t760
+ - items:
+ - enum:
+ - samsung,exynos7-mali
+ - const: samsung,exynos5433-mali
+ - const: arm,mali-t760
- items:
- enum:
- rockchip,rk3399-mali
- allwinner,sun50i-a64-mali
- rockchip,rk3036-mali
- rockchip,rk3066-mali
+ - rockchip,rk3128-mali
- rockchip,rk3188-mali
- rockchip,rk3228-mali
- samsung,exynos4210-mali
compatible:
enum:
- brcm,2711-v3d
+ - brcm,2712-v3d
- brcm,7268-v3d
- brcm,7278-v3d
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR and IMG GPU
+
+maintainers:
+ - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ti,am62-gpu
+ - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: core
+ - const: mem
+ - const: sys
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am62-gpu
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ gpu@fd00000 {
+ compatible = "ti,am62-gpu", "img,img-axe";
+ reg = <0x0fd00000 0x20000>;
+ clocks = <&k3_clks 187 0>;
+ clock-names = "core";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+ };
interrupts:
maxItems: 1
- clocks: {}
- clock-names: {}
- iommus: {}
- power-domains: {}
-
-if:
- properties:
- compatible:
- contains:
- const: samsung,exynos5250-g2d
-
-then:
- properties:
- clocks:
- items:
- - description: fimg2d clock
- clock-names:
- items:
- - const: fimg2d
-
-else:
- properties:
- clocks:
- items:
- - description: sclk_fimg2d clock
- - description: fimg2d clock
- clock-names:
- items:
- - const: sclk_fimg2d
- - const: fimg2d
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
required:
- compatible
- clocks
- clock-names
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5250-g2d
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: fimg2d clock
+ clock-names:
+ items:
+ - const: fimg2d
+
+ else:
+ properties:
+ clocks:
+ items:
+ - description: sclk_fimg2d clock
+ - description: fimg2d clock
+ clock-names:
+ items:
+ - const: sclk_fimg2d
+ - const: fimg2d
+
additionalProperties: false
examples:
properties:
compatible:
enum:
- - "samsung,s5pv210-rotator"
- - "samsung,exynos4210-rotator"
- - "samsung,exynos4212-rotator"
- - "samsung,exynos5250-rotator"
+ - samsung,s5pv210-rotator
+ - samsung,exynos4210-rotator
+ - samsung,exynos4212-rotator
+ - samsung,exynos5250-rotator
+
reg:
maxItems: 1
interrupts:
maxItems: 1
- clocks: {}
- clock-names: {}
- iommus: {}
- power-domains: {}
-
-if:
- properties:
- compatible:
- contains:
- const: samsung,exynos5420-scaler
-
-then:
- properties:
- clocks:
- items:
- - description: mscl clock
-
- clock-names:
- items:
- - const: mscl
-
-else:
- properties:
- clocks:
- items:
- - description: pclk clock
- - description: aclk clock
- - description: aclk_xiu clock
-
- clock-names:
- items:
- - const: pclk
- - const: aclk
- - const: aclk_xiu
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
required:
- compatible
- clocks
- clock-names
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5420-scaler
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: mscl clock
+ clock-names:
+ items:
+ - const: mscl
+ iommus:
+ minItems: 2
+
+ else:
+ properties:
+ clocks:
+ items:
+ - description: pclk clock
+ - description: aclk clock
+ - description: aclk_xiu clock
+ clock-names:
+ items:
+ - const: pclk
+ - const: aclk
+ - const: aclk_xiu
+ iommus:
+ maxItems: 1
+
additionalProperties: false
examples:
properties:
compatible:
- enum:
- - samsung,exynos4210-chipid
- - samsung,exynos850-chipid
+ oneOf:
+ - enum:
+ - samsung,exynos4210-chipid
+ - samsung,exynos850-chipid
+ - items:
+ - enum:
+ - samsung,exynos5433-chipid
+ - samsung,exynos7-chipid
+ - const: samsung,exynos4210-chipid
+ - items:
+ - enum:
+ - samsung,exynos7885-chipid
+ - samsung,exynosautov9-chipid
+ - samsung,exynosautov920-chipid
+ - const: samsung,exynos850-chipid
reg:
maxItems: 1
+++ /dev/null
-Bindings for fan connected to GPIO lines
-
-Required properties:
-- compatible : "gpio-fan"
-
-Optional properties:
-- gpios: Specifies the pins that map to bits in the control value,
- ordered MSB-->LSB.
-- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
- control value that should be set to achieve them. This array
- must have the RPM values in ascending order.
-- alarm-gpios: This pin going active indicates something is wrong with
- the fan, and a udev event will be fired.
-- #cooling-cells: If used as a cooling device, must be <2>
- Also see:
- Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
- min and max states are derived from the speed-map of the fan.
-
-Note: At least one the "gpios" or "alarm-gpios" properties must be set.
-
-Examples:
-
- gpio_fan {
- compatible = "gpio-fan";
- gpios = <&gpio1 14 1
- &gpio1 13 1>;
- gpio-fan,speed-map = <0 0
- 3000 1
- 6000 2>;
- alarm-gpios = <&gpio1 15 1>;
- };
- gpio_fan_cool: gpio_fan {
- compatible = "gpio-fan";
- gpios = <&gpio2 14 1
- &gpio2 13 1>;
- gpio-fan,speed-map = <0 0>,
- <3000 1>,
- <6000 2>;
- alarm-gpios = <&gpio2 15 1>;
- #cooling-cells = <2>; /* min followed by max */
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to GPIO lines
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ compatible:
+ const: gpio-fan
+
+ gpios:
+ description: |
+ Specifies the pins that map to bits in the control value,
+ ordered MSB-->LSB.
+ minItems: 1
+ maxItems: 7
+
+ alarm-gpios:
+ maxItems: 1
+
+ gpio-fan,speed-map:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 127
+ items:
+ items:
+ - description: fan speed in RPMs
+ - description: control value
+ description: |
+ A mapping of possible fan RPM speeds and the
+ control value that should be set to achieve them. This array
+ must have the RPM values in ascending order.
+
+ '#cooling-cells':
+ const: 2
+
+required:
+ - compatible
+ - gpios
+ - gpio-fan,speed-map
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio2 14 1
+ &gpio2 13 1>;
+ gpio-fan,speed-map = < 0 0>,
+ <3000 1>,
+ <6000 2>;
+ alarm-gpios = <&gpio2 15 1>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
io-channels:
minItems: 1
- maxItems: 8 # Should be enough
+ maxItems: 51 # Should be enough
description: >
List of phandles to ADC channels to read the monitoring values
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+ - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc4286
+ - lltc,ltc4287
+
+ reg:
+ maxItems: 1
+
+ adi,vrange-low-enable:
+ description:
+ This property is a bool parameter to represent the
+ voltage range is 25.6 volts or 102.4 volts for this chip.
+ The default is 102.4 volts.
+ type: boolean
+
+ shunt-resistor-micro-ohms:
+ description:
+ Resistor value micro-ohms.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "lltc,ltc4286";
+ reg = <0x40>;
+ adi,vrange-low-enable;
+ shunt-resistor-micro-ohms = <300>;
+ };
+ };
compatible:
enum:
- adi,adt75
+ - ams,as6200
- atmel,at30ts74
- dallas,ds1775
- dallas,ds75
vs-supply:
description: phandle to the regulator that provides the +VS supply
+ interrupts:
+ maxItems: 1
+
required:
- compatible
- reg
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ams,as6200
+ - ti,tmp100
+ - ti,tmp101
+ - ti,tmp112
+ then:
+ properties:
+ interrupts: false
+
additionalProperties: false
examples:
vs-supply = <&vs>;
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@48 {
+ compatible = "ams,as6200";
+ reg = <0x48>;
+ vs-supply = <&vs>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
- samsung,exynos5250-hsi2c # Exynos5250 and Exynos5420
- samsung,exynos5260-hsi2c # Exynos5260
- samsung,exynos7-hsi2c # Exynos7
- - samsung,exynosautov9-hsi2c # ExynosAutoV9 and Exynos850
+ - samsung,exynosautov9-hsi2c
+ - items:
+ - enum:
+ - samsung,exynos5433-hsi2c
+ - tesla,fsd-hsi2c
+ - const: samsung,exynos7-hsi2c
+ - items:
+ - enum:
+ - samsung,exynos850-hsi2c
+ - const: samsung,exynosautov9-hsi2c
- const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420
deprecated: true
properties:
compatible:
- enum:
- - samsung,s3c2410-i2c
- - samsung,s3c2440-i2c
- # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
- - samsung,s3c2440-hdmiphy-i2c
- # For s3c2440-like I2C used as a host to SATA PHY controller on an
- # internal bus:
- - samsung,exynos5-sata-phy-i2c
+ oneOf:
+ - enum:
+ - samsung,s3c2410-i2c
+ - samsung,s3c2440-i2c
+ # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+ - samsung,s3c2440-hdmiphy-i2c
+ # For s3c2440-like I2C used as a host to SATA PHY controller on an
+ # internal bus:
+ - samsung,exynos5-sata-phy-i2c
+ - items:
+ - enum:
+ - samsung,exynos7885-i2c
+ - samsung,exynos850-i2c
+ - const: samsung,s3c2440-i2c
'#address-cells':
const: 1
- st,stm32f7-i2c
- st,stm32mp13-i2c
- st,stm32mp15-i2c
+ - st,stm32mp25-i2c
then:
properties:
i2c-scl-rising-time-ns:
clock-frequency:
enum: [100000, 400000]
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32f4-i2c
+ - st,stm32f7-i2c
+ - st,stm32mp13-i2c
+ - st,stm32mp15-i2c
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+
+ interrupt-names:
+ minItems: 2
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
properties:
compatible:
enum:
- st,stm32f7-i2c
- st,stm32mp13-i2c
- st,stm32mp15-i2c
+ - st,stm32mp25-i2c
reg:
maxItems: 1
items:
- description: interrupt ID for I2C event
- description: interrupt ID for I2C error
+ minItems: 1
interrupt-names:
items:
- const: event
- const: error
+ minItems: 1
resets:
maxItems: 1
$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
description: |
- Analog Devices AD7091R5 4-Channel 12-Bit ADC
+ Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+ Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs
+ supporting SPI interface
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
properties:
compatible:
enum:
+ - adi,ad7091r2
+ - adi,ad7091r4
- adi,ad7091r5
+ - adi,ad7091r8
reg:
maxItems: 1
+ vdd-supply:
+ description:
+ Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V).
+
+ vdrive-supply:
+ description:
+ Determines the voltage level at which the interface logic will operate.
+ The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by
+ more than 0.3V.
+
vref-supply:
description:
Phandle to the vref power supply
- interrupts:
+ convst-gpios:
+ description:
+ GPIO connected to the CONVST pin.
+ This logic input is used to initiate conversions on the analog
+ input channels.
maxItems: 1
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt for signaling when conversion results exceed the high limit for
+ ADC readings or fall below the low limit for them. Interrupt source must
+ be attached to ALERT/BUSY/GPO0 pin.
+ maxItems: 1
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ # AD7091R-2 does not have ALERT/BUSY/GPO pin
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7091r2
+ then:
+ properties:
+ interrupts: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7091r2
+ - adi,ad7091r4
+ - adi,ad7091r8
+ then:
+ required:
+ - convst-gpios
+
+unevaluatedProperties: false
examples:
- |
interrupt-parent = <&gpio>;
};
};
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7091r8";
+ reg = <0x0>;
+ spi-max-frequency = <1000000>;
+ vref-supply = <&adc_vref>;
+ convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
...
compatible = "adi,ad7780";
reg = <0>;
- avdd-supply = <&vdd_supply>;
- powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&vdd_supply>;
+ powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX34408/MAX34409 current monitors with overcurrent control
+
+maintainers:
+ - Ivan Mikhaylov <fr0st61te@gmail.com>
+
+description: |
+ The MAX34408/MAX34409 are two- and four-channel current monitors that are
+ configured and monitored with a standard I2C/SMBus serial interface. Each
+ unidirectional current sensor offers precision high-side operation with a
+ low full-scale sense voltage. The devices automatically sequence through
+ two or four channels and collect the current-sense samples and average them
+ to reduce the effect of impulse noise. The raw ADC samples are compared to
+ user-programmable digital thresholds to indicate overcurrent conditions.
+ Overcurrent conditions trigger a hardware output to provide an immediate
+ indication to shut down any necessary external circuitry.
+
+ Specifications about the devices can be found at:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max34408
+ - maxim,max34409
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ powerdown-gpios:
+ description:
+ Shutdown Output. Open-drain output. This output transitions to high impedance
+ when any of the digital comparator thresholds are exceeded as long as the ENA
+ pin is high.
+ maxItems: 1
+
+ powerdown-status-gpios:
+ description:
+ SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+ unconditionally deassert (force low) the SHTDN output and reset the shutdown
+ delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+ maxItems: 1
+
+ vdd-supply: true
+
+patternProperties:
+ "^channel@[0-3]$":
+ $ref: adc.yaml
+ type: object
+ description:
+ Represents the internal channels of the ADC.
+
+ properties:
+ reg:
+ items:
+ - minimum: 0
+ maximum: 3
+
+ maxim,rsense-val-micro-ohms:
+ description:
+ Adjust the Rsense value to monitor higher or lower current levels for
+ input.
+ enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+ default: 1000
+
+ required:
+ - reg
+ - maxim,rsense-val-micro-ohms
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max34408
+ then:
+ patternProperties:
+ "^channel@[2-3]$": false
+ "^channel@[0-1]$":
+ properties:
+ reg:
+ maximum: 1
+ else:
+ patternProperties:
+ "^channel@[0-3]$":
+ properties:
+ reg:
+ maximum: 3
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1e {
+ compatible = "maxim,max34409";
+ reg = <0x1e>;
+ powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ maxim,rsense-val-micro-ohms = <5000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ maxim,rsense-val-micro-ohms = <10000>;
+ };
+ };
+ };
- const: qcom,spmi-iadc
reg:
- description: IADC base address and length in the SPMI PMIC register map
+ description: IADC base address in the SPMI PMIC register map
maxItems: 1
qcom,external-resistor-micro-ohms:
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spmi {
+
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
- pmic_iadc: adc@3600 {
+
+ adc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
...
#address-cells = <1>;
#size-cells = <0>;
- pmic_rradc: adc@4500 {
+ adc@4500 {
compatible = "qcom,pmi8998-rradc";
reg = <0x4500>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
examples:
- |
- spmi {
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
- /* VADC node */
- pmic_vadc: adc@3100 {
+
+ adc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 0x1>;
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spmi {
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
+
adc@3100 {
reg = <0x3100>;
compatible = "qcom,spmi-adc7";
properties:
compatible:
- enum:
- - samsung,exynos-adc-v1 # Exynos5250
- - samsung,exynos-adc-v2
- - samsung,exynos3250-adc
- - samsung,exynos4212-adc # Exynos4212 and Exynos4412
- - samsung,exynos7-adc
- - samsung,s3c2410-adc
- - samsung,s3c2416-adc
- - samsung,s3c2440-adc
- - samsung,s3c2443-adc
- - samsung,s3c6410-adc
- - samsung,s5pv210-adc
+ oneOf:
+ - enum:
+ - samsung,exynos-adc-v1 # Exynos5250
+ - samsung,exynos-adc-v2
+ - samsung,exynos3250-adc
+ - samsung,exynos4212-adc # Exynos4212 and Exynos4412
+ - samsung,exynos7-adc
+ - samsung,s3c2410-adc
+ - samsung,s3c2416-adc
+ - samsung,s3c2440-adc
+ - samsung,s3c2443-adc
+ - samsung,s3c6410-adc
+ - samsung,s5pv210-adc
+ - items:
+ - enum:
+ - samsung,exynos5433-adc
+ - const: samsung,exynos7-adc
reg:
maxItems: 1
- compatible
- "#io-channel-cells"
-examples:
- - |
- #include <dt-bindings/clock/mt8183-clk.h>
- pmic {
- compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
- adc {
- compatible = "ti,palmas-gpadc";
- interrupts = <18 0>,
- <16 0>,
- <17 0>;
- #io-channel-cells = <1>;
- ti,channel0-current-microamp = <5>;
- ti,channel3-current-microamp = <10>;
- };
- };
...
description: |
Digital Step Attenuator IIO devices with gpio interface.
Offer various frequency and attenuation ranges.
+ ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
+
HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
properties:
compatible:
enum:
+ - adi,adrf5740
- adi,hmc425a
- adi,hmc540s
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aosong AGS02MA VOC Sensor
+
+description: |
+ AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default
+ address of 0x1a.
+
+ Datasheet:
+ https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - aosong,ags02ma
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voc-sensor@1a {
+ compatible = "aosong,ags02ma";
+ reg = <0x1a>;
+ vdd-supply = <&vdd_regulator>;
+ };
+ };
vdd-supply: true
vss-supply: true
+ adi,rbuf-gain2-en:
+ description: Specify to allow an external amplifier to be connected in a
+ gain of two configuration.
+ type: boolean
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4821 and similar DACs
+
+description: |
+ Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs.
+ Device supports simplex communication over SPI in Mode 0 and Mode 3.
+
+ +---------+--------------+-------------+
+ | Device | Resolution | Channels |
+ |---------|--------------|-------------|
+ | MCP4801 | 8-bit | 1 |
+ | MCP4802 | 8-bit | 2 |
+ | MCP4811 | 10-bit | 1 |
+ | MCP4812 | 10-bit | 2 |
+ | MCP4821 | 12-bit | 1 |
+ | MCP4822 | 12-bit | 2 |
+ +---------+--------------+-------------+
+
+ Datasheet:
+ MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf
+ MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - microchip,mcp4801
+ - microchip,mcp4802
+ - microchip,mcp4811
+ - microchip,mcp4812
+ - microchip,mcp4821
+ - microchip,mcp4822
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ ldac-gpios:
+ description: |
+ Active Low LDAC (Latch DAC Input) pin used to update the DAC output.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: |
+ Active Low SHDN pin used to enter the shutdown mode.
+ maxItems: 1
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dac@0 {
+ compatible = "microchip,mcp4821";
+ reg = <0>;
+ vdd-supply = <&vdd_regulator>;
+ ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ spi-cpha;
+ spi-cpol;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors
+
+maintainers:
+ - Li peiyu <579lpy@gmail.com>
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description:
+ https://www.ti.com/lit/ds/symlink/hdc3020.pdf
+
+ The HDC302x is an integrated capacitive based relative humidity (RH)
+ and temperature sensor.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,hdc3021
+ - ti,hdc3022
+ - const: ti,hdc3020
+ - const: ti,hdc3020
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ humidity-sensor@47 {
+ compatible = "ti,hdc3021", "ti,hdc3020";
+ reg = <0x47>;
+ vdd-supply = <&vcc_3v3>;
+ };
+ };
spi-cpol: true
+ spi-cs-inactive-delay-ns:
+ minimum: 16000
+ default: 16000
+
interrupts:
maxItems: 1
spi-max-frequency:
maximum: 2000000
+ spi-cs-inactive-delay-ns:
+ minimum: 16000
+ default: 16000
+
interrupts:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI323 6-Axis IMU
+
+maintainers:
+ - Jagath Jog J <jagathjog1996@gmail.com>
+
+description:
+ BMI323 is a 6-axis inertial measurement unit that supports acceleration and
+ gyroscopic measurements with hardware fifo buffering. Sensor also provides
+ events information such as motion, steps, orientation, single and double
+ tap detection.
+
+properties:
+ compatible:
+ const: bosch,bmi323
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+ vddio-supply: true
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - INT1
+ - INT2
+
+ drive-open-drain:
+ description:
+ set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
+
+ mount-matrix:
+ description:
+ an optional 3x3 mounting rotation matrix.
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ // Example for I2C
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imu@68 {
+ compatible = "bosch,bmi323";
+ reg = <0x68>;
+ vddio-supply = <&vddio>;
+ vdd-supply = <&vdd>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lite-On LTR390 ALS and UV Sensor
+
+description: |
+ The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a
+ single package with i2c address of 0x53.
+
+ Datasheet:
+ https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - liteon,ltr390
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Level interrupt pin with open drain output.
+ The sensor pulls this pin low when the measured reading is greater than
+ some configured threshold.
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@53 {
+ compatible = "liteon,ltr390";
+ reg = <0x53>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd_regulator>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vishay VEML6075 UVA and UVB sensor
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+ compatible:
+ const: vishay,veml6075
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uv-sensor@10 {
+ compatible = "vishay,veml6075";
+ reg = <0x10>;
+ vdd-supply = <&vdd_reg>;
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+ support for Honeywell TruStability HSC and SSC digital pressure sensor
+ series.
+
+ These sensors have either an I2C, an SPI or an analog interface. Only the
+ digital versions are supported by this driver.
+
+ There are 118 models with different pressure ranges available in each family.
+ The vendor calls them "HSC series" and "SSC series". All of them have an
+ identical programming model but differ in pressure range, unit and transfer
+ function.
+
+ To support different models one needs to specify the pressure range as well
+ as the transfer function. Pressure range can either be provided via
+ pressure-triplet (directly extracted from the part number) or in case it's
+ a custom chip via numerical range limits converted to pascals.
+
+ The transfer function defines the ranges of raw conversion values delivered
+ by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+ maximum pressure that can be measured.
+
+ Please note that in case of an SPI-based sensor, the clock signal should not
+ exceed 800kHz and the MOSI signal is not required.
+
+ Specifications about the devices can be found at:
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+ - Petre Rodan <petre.rodan@subdimension.ro>
+
+properties:
+ compatible:
+ const: honeywell,hsc030pa
+
+ reg:
+ maxItems: 1
+
+ honeywell,transfer-function:
+ description: |
+ Transfer function which defines the range of valid values delivered by
+ the sensor.
+ 0 - A, 10% to 90% of 2^14
+ 1 - B, 5% to 95% of 2^14
+ 2 - C, 5% to 85% of 2^14
+ 3 - F, 4% to 94% of 2^14
+ enum: [0, 1, 2, 3]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,pressure-triplet:
+ description: |
+ Case-sensitive five character string that defines pressure range, unit
+ and type as part of the device nomenclature. In the unlikely case of a
+ custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+ enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+ 006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+ 400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+ 010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+ 600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+ 250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+ 1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+ 100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+ 2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+ 160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+ 150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+ 001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+ 010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+ 150PG, NA]
+ $ref: /schemas/types.yaml#/definitions/string
+
+ honeywell,pmin-pascal:
+ description: |
+ Minimum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
+
+ honeywell,pmax-pascal:
+ description: |
+ Maximum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
+
+ vdd-supply:
+ description:
+ Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+ spi-max-frequency:
+ maximum: 800000
+
+required:
+ - compatible
+ - reg
+ - honeywell,transfer-function
+ - honeywell,pressure-triplet
+
+additionalProperties: false
+
+dependentSchemas:
+ honeywell,pmin-pascal:
+ properties:
+ honeywell,pressure-triplet:
+ const: NA
+ honeywell,pmax-pascal:
+ properties:
+ honeywell,pressure-triplet:
+ const: NA
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@28 {
+ compatible = "honeywell,hsc030pa";
+ reg = <0x28>;
+ honeywell,transfer-function = <0>;
+ honeywell,pressure-triplet = "030PA";
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@0 {
+ compatible = "honeywell,hsc030pa";
+ reg = <0>;
+ spi-max-frequency = <800000>;
+ honeywell,transfer-function = <0>;
+ honeywell,pressure-triplet = "NA";
+ honeywell,pmin-pascal = <0>;
+ honeywell,pmax-pascal = <200000>;
+ };
+ };
+...
honeywell,pmin-pascal:
description:
Minimum pressure value the sensor can measure in pascal.
- $ref: /schemas/types.yaml#/definitions/uint32
honeywell,pmax-pascal:
description:
Maximum pressure value the sensor can measure in pascal.
- $ref: /schemas/types.yaml#/definitions/uint32
honeywell,transfer-function:
description: |
$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Melexis MLX90632 contactless Infra Red temperature sensor
+title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor
maintainers:
- Crt Mori <cmo@melexis.com>
Since measured object emissivity effects Infra Red energy emitted,
emissivity should be set before requesting the object temperature.
+ https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635
+
+ MLX90635 is most suitable for consumer applications where
+ measured object temperature is in range between -20 to 100 degrees
+ Celsius with relative error of measurement 2 degree Celsius in
+ object temperature range for industrial applications, while just 0.2
+ degree Celsius for human body measurement applications. Since it can
+ operate and measure ambient temperature in range of -20 to 85 degrees
+ Celsius it is suitable also for outdoor use.
+
+ Since measured object emissivity effects Infra Red energy emitted,
+ emissivity should be set before requesting the object temperature.
+
properties:
compatible:
- const: melexis,mlx90632
+ enum:
+ - melexis,mlx90632
+ - melexis,mlx90635
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP9600 thermocouple EMF converter
+
+maintainers:
+ - Andrew Hepp <andrew.hepp@ahepp.dev>
+
+description:
+ https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
+
+properties:
+ compatible:
+ const: microchip,mcp9600
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 6
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 6
+ items:
+ enum:
+ - open-circuit
+ - short-circuit
+ - alert1
+ - alert2
+ - alert3
+ - alert4
+
+ thermocouple-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+ Use defines in dt-bindings/iio/temperature/thermocouple.h.
+ Supported types are B, E, J, K, N, R, S, T.
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/temperature/thermocouple.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@60 {
+ compatible = "microchip,mcp9600";
+ reg = <0x60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "open-circuit";
+ thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+ vdd-supply = <&vdd>;
+ };
+ };
:maxdepth: 1
ABI
+ dts-coding-style
writing-bindings
writing-schema
submitting-patches
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+description: |
+ Adafruit Mini I2C Gamepad
+
+ +-----------------------------+
+ | ___ |
+ | / \ (X) |
+ | | S | __ __ (Y) (A) |
+ | \___/ |ST| |SE| (B) |
+ | |
+ +-----------------------------+
+
+ S -> 10-bit precision bidirectional analog joystick
+ ST -> Start
+ SE -> Select
+ X, A, B, Y -> Digital action buttons
+
+ Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+ Product page: https://www.adafruit.com/product/5743
+ Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+ compatible:
+ const: adafruit,seesaw-gamepad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description:
+ The gamepad's IRQ pin triggers a rising edge if interrupts are enabled.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ joystick@50 {
+ compatible = "adafruit,seesaw-gamepad";
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x50>;
+ };
+ };
properties:
compatible:
- items:
- - const: elan,ekth6915
+ enum:
+ - elan,ekth6915
+ - ilitek,ili2901
reg:
const: 0x10
maxItems: 1
interrupts:
- maxItems: 1
+ oneOf:
+ - items:
+ - description: Optional key interrupt or wakeup interrupt
+ - items:
+ - description: Key interrupt
+ - description: Wakeup interrupt
+
+ interrupt-names:
+ description:
+ Optional interrupt names, can be used to specify a separate dedicated
+ wake-up interrupt in addition to the gpio irq
+ oneOf:
+ - items:
+ - enum: [ irq, wakeup ]
+ - items:
+ - const: irq
+ - const: wakeup
label:
description: Descriptive name of the key.
- required:
- gpios
+ allOf:
+ - if:
+ properties:
+ interrupts:
+ minItems: 2
+ required:
+ - interrupts
+ then:
+ properties:
+ interrupt-names:
+ minItems: 2
+ required:
+ - interrupt-names
+
dependencies:
wakeup-event-action: [ wakeup-source ]
linux,input-value: [ gpios ]
linux,code = <108>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
+
+ key-wakeup {
+ label = "GPIO Key WAKEUP";
+ linux,code = <143>;
+ interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+ <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
};
...
+++ /dev/null
-Device-Tree bindings for GPIO attached mice
-
-This simply uses standard GPIO handles to define a simple mouse connected
-to 5-7 GPIO lines.
-
-Required properties:
- - compatible: must be "gpio-mouse"
- - scan-interval-ms: The scanning interval in milliseconds
- - up-gpios: GPIO line phandle to the line indicating "up"
- - down-gpios: GPIO line phandle to the line indicating "down"
- - left-gpios: GPIO line phandle to the line indicating "left"
- - right-gpios: GPIO line phandle to the line indicating "right"
-
-Optional properties:
- - button-left-gpios: GPIO line handle to the left mouse button
- - button-middle-gpios: GPIO line handle to the middle mouse button
- - button-right-gpios: GPIO line handle to the right mouse button
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-gpio-mouse {
- compatible = "gpio-mouse";
- scan-interval-ms = <50>;
- up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-mouse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached mouse
+
+description: |
+ This simply uses standard GPIO handles to define a simple mouse connected
+ to 5-7 GPIO lines.
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ const: gpio-mouse
+
+ scan-interval-ms:
+ maxItems: 1
+
+ up-gpios:
+ maxItems: 1
+
+ down-gpios:
+ maxItems: 1
+
+ left-gpios:
+ maxItems: 1
+
+ right-gpios:
+ maxItems: 1
+
+ button-left-gpios:
+ maxItems: 1
+
+ button-middle-gpios:
+ maxItems: 1
+
+ button-right-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - scan-interval-ms
+ - up-gpios
+ - down-gpios
+ - left-gpios
+ - right-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ gpio-mouse {
+ compatible = "gpio-mouse";
+ scan-interval-ms = <50>;
+ up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
maintainers:
- Jeff LaBundy <jeff@labundy.com>
+allOf:
+ - $ref: input.yaml#
+
description: |
The Azoteq IQS269A is an 8-channel capacitive touch controller that features
additional Hall-effect and inductive sensing capabilities.
properties:
compatible:
- const: azoteq,iqs269a
+ enum:
+ - azoteq,iqs269a
+ - azoteq,iqs269a-00
+ - azoteq,iqs269a-d0
reg:
maxItems: 1
default: 1
description: Specifies the slider coordinate filter strength.
+ azoteq,touch-hold-ms:
+ multipleOf: 256
+ minimum: 256
+ maximum: 65280
+ default: 5120
+ description:
+ Specifies the length of time (in ms) for which the channel selected by
+ 'azoteq,gpio3-select' must be held in a state of touch in order for an
+ approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Specifies the numeric keycodes associated with each available gesture in
+ the following order (enter 0 for unused gestures):
+ 0: Slider 0 tap
+ 1: Slider 0 hold
+ 2: Slider 0 positive flick or swipe
+ 3: Slider 0 negative flick or swipe
+ 4: Slider 1 tap
+ 5: Slider 1 hold
+ 6: Slider 1 positive flick or swipe
+ 7: Slider 1 negative flick or swipe
+
+ azoteq,gesture-swipe:
+ type: boolean
+ description:
+ Directs the device to interpret axial gestures as a swipe (finger remains
+ on slider) instead of a flick (finger leaves slider).
+
+ azoteq,timeout-tap-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 400
+ description:
+ Specifies the length of time (in ms) within which a slider touch must be
+ released in order to be interpreted as a tap. Default and maximum values
+ as well as step size are reduced by a factor of 4 with device version 2.
+
+ azoteq,timeout-swipe-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 2000
+ description:
+ Specifies the length of time (in ms) within which an axial gesture must be
+ completed in order to be interpreted as a flick or swipe. Default and max-
+ imum values as well as step size are reduced by a factor of 4 with device
+ version 2.
+
+ azoteq,thresh-swipe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 128
+ description:
+ Specifies the number of points across which an axial gesture must travel
+ in order to be interpreted as a flick or swipe.
+
+dependencies:
+ azoteq,gesture-swipe: ["linux,keycodes"]
+ azoteq,timeout-tap-ms: ["linux,keycodes"]
+ azoteq,timeout-swipe-ms: ["linux,keycodes"]
+ azoteq,thresh-swipe: ["linux,keycodes"]
+
patternProperties:
"^channel@[0-7]$":
type: object
additionalProperties: false
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - azoteq,iqs269a-d0
+then:
+ patternProperties:
+ "^channel@[0-7]$":
+ properties:
+ azoteq,slider1-select: false
+else:
+ properties:
+ azoteq,touch-hold-ms: false
+
required:
- compatible
- reg
azoteq,hall-enable;
azoteq,suspend-mode = <2>;
+ linux,keycodes = <KEY_PLAYPAUSE>,
+ <KEY_STOPCD>,
+ <KEY_NEXTSONG>,
+ <KEY_PREVIOUSSONG>;
+
+ azoteq,timeout-tap-ms = <400>;
+ azoteq,timeout-swipe-ms = <800>;
+
channel@0 {
reg = <0x0>;
unevaluatedProperties: false
-examples:
- - |
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-
- pmic {
- compatible = "mediatek,mt6397";
-
- keys {
- compatible = "mediatek,mt6397-keys";
- mediatek,long-press-mode = <1>;
- power-off-time-sec = <0>;
-
- key-power {
- linux,keycodes = <KEY_POWER>;
- wakeup-source;
- };
-
- key-home {
- linux,keycodes = <KEY_VOLUMEDOWN>;
- };
- };
- };
+...
Enables the Linux input system's autorepeat feature on the input device.
linux,keycodes:
- minItems: 6
- maxItems: 6
+ minItems: 3
+ maxItems: 8
description: |
Specifies an array of numeric keycode values to
be used for the channels. If this property is
omitted, KEY_A, KEY_B, etc are used as defaults.
- The array must have exactly six entries.
+ The number of entries must correspond to the number of channels.
microchip,sensor-gain:
$ref: /schemas/types.yaml#/definitions/uint32
open drain. This property allows using the active
high push-pull output.
+ microchip,sensitivity-delta-sense:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 32
+ enum: [1, 2, 4, 8, 16, 32, 64, 128]
+ description:
+ Controls the sensitivity multiplier of a touch detection.
+ Higher value means more sensitive settings.
+ At the more sensitive settings, touches are detected for a smaller delta
+ capacitance corresponding to a "lighter" touch.
+
+ microchip,signal-guard:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 8
+ items:
+ enum: [0, 1]
+ description: |
+ 0 - off
+ 1 - on
+ The signal guard isolates the signal from virtual grounds.
+ If enabled then the behavior of the channel is changed to signal guard.
+ The number of entries must correspond to the number of channels.
+
+ microchip,input-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 127
+ description:
+ Specifies the delta threshold that is used to determine if a touch has
+ been detected. A higher value means a larger difference in capacitance
+ is required for a touch to be registered, making the touch sensor less
+ sensitive.
+ The number of entries must correspond to the number of channels.
+
+ microchip,calib-sensitivity:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 8
+ items:
+ enum: [1, 2, 4]
+ description: |
+ Specifies an array of numeric values that controls the gain
+ used by the calibration routine to enable sensor inputs
+ to be more sensitive for proximity detection.
+ Gain is based on touch pad capacitance range
+ 1 - 5-50pF
+ 2 - 0-25pF
+ 4 - 0-12.5pF
+ The number of entries must correspond to the number of channels.
+
patternProperties:
"^led@[0-7]$":
type: object
contains:
enum:
- microchip,cap1106
+ - microchip,cap1203
+ - microchip,cap1206
+ - microchip,cap1293
+ - microchip,cap1298
then:
patternProperties:
"^led@[0-7]$": false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,cap1106
+ - microchip,cap1126
+ - microchip,cap1188
+ - microchip,cap1203
+ - microchip,cap1206
+ then:
+ properties:
+ microchip,signal-guard: false
+ microchip,calib-sensitivity: false
+
required:
- compatible
- interrupts
reg = <0x28>;
autorepeat;
microchip,sensor-gain = <2>;
+ microchip,sensitivity-delta-sense = <16>;
+ microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>;
linux,keycodes = <103>, /* KEY_UP */
<106>, /* KEY_RIGHT */
additionalProperties: false
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- sc2731_pmic: pmic@0 {
- compatible = "sprd,sc2731";
- reg = <0 0>;
- spi-max-frequency = <26000000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- vibrator@eb4 {
- compatible = "sprd,sc2731-vibrator";
- reg = <0xeb4>;
- };
- };
+...
+++ /dev/null
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2665" - DRV2665
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2665";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665
+++ /dev/null
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
- - compatible - "ti,drv2667" - DRV2667
- - reg - I2C slave address
- - vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
- compatible = "ti,drv2667";
- reg = <0x59>;
- vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+ Product Page:
+ http://www.ti.com/product/drv2665
+ http://www.ti.com/product/drv2667
+
+maintainers:
+ - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,drv2665
+ - ti,drv2667
+
+ reg:
+ maxItems: 1
+
+ vbat-supply:
+ description: Required supply regulator
+
+required:
+ - compatible
+ - reg
+ - vbat-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ haptics@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
+ vbat-supply = <&vbat>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Neonode infrared touchscreen controller
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: neonode,zforce
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ irq-gpios:
+ maxItems: 1
+
+ x-size:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ y-size:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@50 {
+ compatible = "neonode,zforce";
+ reg = <0x50>;
+ interrupts = <2 0>;
+ vdd-supply = <®_zforce_vdd>;
+
+ reset-gpios = <&gpio5 9 0>; /* RST */
+ irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+ touchscreen-min-x = <0>;
+ touchscreen-size-x = <800>;
+ touchscreen-min-y = <0>;
+ touchscreen-size-y = <600>;
+ };
+ };
+...
+++ /dev/null
-* Samsung S6SY761 touchscreen controller
-
-Required properties:
-- compatible : must be "samsung,s6sy761"
-- reg : I2C slave address, (e.g. 0x48)
-- interrupts : interrupt specification
-- avdd-supply : analogic power supply
-- vdd-supply : power supply
-
-Optional properties:
-- touchscreen-size-x : see touchscreen.txt. This property is embedded in the
- device. If defined it forces a different x resolution.
-- touchscreen-size-y : see touchscreen.txt. This property is embedded in the
- device. If defined it forces a different y resolution.
-
-Example:
-
-i2c@00000000 {
-
- /* ... */
-
- touchscreen@48 {
- compatible = "samsung,s6sy761";
- reg = <0x48>;
- interrupt-parent = <&gpa1>;
- interrupts = <1 IRQ_TYPE_NONE>;
- avdd-supply = <&ldo30_reg>;
- vdd-supply = <&ldo31_reg>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6SY761 touchscreen controller
+
+maintainers:
+ - Andi Shyti <andi.shyti@kernel.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6sy761
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ avdd-supply: true
+ vdd-supply: true
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - avdd-supply
+ - vdd-supply
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ avdd-supply = <&ldo30_reg>;
+ vdd-supply = <&ldo31_reg>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ };
+ };
+++ /dev/null
-* Neonode infrared touchscreen controller
-
-Required properties:
-- compatible: must be "neonode,zforce"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- reset-gpios: reset gpio the chip is connected to
-- x-size: horizontal resolution of touchscreen
-- y-size: vertical resolution of touchscreen
-
-Optional properties:
-- irq-gpios : interrupt gpio the chip is connected to
-- vdd-supply: Regulator controlling the controller supply
-
-Example:
-
- i2c@00000000 {
- /* ... */
-
- zforce_ts@50 {
- compatible = "neonode,zforce";
- reg = <0x50>;
- interrupts = <2 0>;
- vdd-supply = <®_zforce_vdd>;
-
- reset-gpios = <&gpio5 9 0>; /* RST */
- irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
-
- x-size = <800>;
- y-size = <600>;
- };
-
- /* ... */
- };
- const: qcom,msm8998-bwmon # BWMON v4
- items:
- enum:
+ - qcom,qcm2290-cpu-bwmon
- qcom,sc7180-cpu-bwmon
- qcom,sc7280-cpu-bwmon
- qcom,sc8280xp-cpu-bwmon
- qcom,sdm845-cpu-bwmon
+ - qcom,sm6115-cpu-bwmon
- qcom,sm6350-llcc-bwmon
- qcom,sm8250-cpu-bwmon
- qcom,sm8550-cpu-bwmon
+ - qcom,sm8650-cpu-bwmon
- const: qcom,sdm845-bwmon # BWMON v4, unified register space
- items:
- enum:
- qcom,sm6350-cpu-bwmon
- qcom,sm8250-llcc-bwmon
- qcom,sm8550-llcc-bwmon
+ - qcom,sm8650-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon # BWMON v5
- const: qcom,sdm845-llcc-bwmon # BWMON v5
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Network-On-Chip interconnect
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+ The Qualcomm SM6115 interconnect providers support adjusting the
+ bandwidth requirements between the various NoC fabrics.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm6115-bimc
+ - qcom,sm6115-cnoc
+ - qcom,sm6115-snoc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+
+# Child node's properties
+patternProperties:
+ '^interconnect-[a-z0-9]+$':
+ type: object
+ description:
+ The interconnect providers do not have a separate QoS register space,
+ but share parent's space.
+
+ $ref: qcom,rpm-common.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6115-clk-virt
+ - qcom,sm6115-mmrt-virt
+ - qcom,sm6115-mmnrt-virt
+
+ required:
+ - compatible
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: qcom,rpm-common.yaml#
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm6115-cnoc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: USB-NoC AXI clock
+
+ clock-names:
+ items:
+ - const: usb_axi
+
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm6115-snoc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: CPU-NoC AXI clock.
+ - description: UFS-NoC AXI clock.
+ - description: USB-NoC AXI clock.
+ - description: IPA clock.
+
+ clock-names:
+ items:
+ - const: cpu_axi
+ - const: ufs_axi
+ - const: usb_axi
+ - const: ipa
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6115-bimc
+ - qcom,sm6115-clk-virt
+ - qcom,sm6115-mmrt-virt
+ - qcom,sm6115-mmnrt-virt
+
+ then:
+ properties:
+ clocks: false
+ clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+
+ snoc: interconnect@1880000 {
+ compatible = "qcom,sm6115-snoc";
+ reg = <0x01880000 0x60200>;
+ clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&rpmcc RPM_SMD_IPA_CLK>;
+ clock-names = "cpu_axi",
+ "ufs_axi",
+ "usb_axi",
+ "ipa";
+ #interconnect-cells = <1>;
+
+ qup_virt: interconnect-clk {
+ compatible = "qcom,sm6115-clk-virt";
+ #interconnect-cells = <1>;
+ };
+
+ mmnrt_virt: interconnect-mmnrt {
+ compatible = "qcom,sm6115-mmnrt-virt";
+ #interconnect-cells = <1>;
+ };
+
+ mmrt_virt: interconnect-mmrt {
+ compatible = "qcom,sm6115-mmrt-virt";
+ #interconnect-cells = <1>;
+ };
+ };
+
+ cnoc: interconnect@1900000 {
+ compatible = "qcom,sm6115-cnoc";
+ reg = <0x01900000 0x8200>;
+ #interconnect-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650
+
+maintainers:
+ - Abel Vesa <abel.vesa@linaro.org>
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ RPMh interconnect providers support system bandwidth requirements through
+ RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+ able to communicate with the BCM through the Resource State Coordinator (RSC)
+ associated with each execution environment. Provider nodes must point to at
+ least one RPMh device child node pertaining to their RSC and each provider
+ can map to multiple RPMh resources.
+
+ See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8650-aggre1-noc
+ - qcom,sm8650-aggre2-noc
+ - qcom,sm8650-clk-virt
+ - qcom,sm8650-cnoc-main
+ - qcom,sm8650-config-noc
+ - qcom,sm8650-gem-noc
+ - qcom,sm8650-lpass-ag-noc
+ - qcom,sm8650-lpass-lpiaon-noc
+ - qcom,sm8650-lpass-lpicx-noc
+ - qcom,sm8650-mc-virt
+ - qcom,sm8650-mmss-noc
+ - qcom,sm8650-nsp-noc
+ - qcom,sm8650-pcie-anoc
+ - qcom,sm8650-system-noc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+
+allOf:
+ - $ref: qcom,rpmh-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-clk-virt
+ - qcom,sm8650-mc-virt
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-pcie-anoc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: aggre-NOC PCIe AXI clock
+ - description: cfg-NOC PCIe a-NOC AHB clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-aggre1-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: aggre UFS PHY AXI clock
+ - description: aggre USB3 PRIM AXI clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-aggre2-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: RPMH CC IPA clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-aggre1-noc
+ - qcom,sm8650-aggre2-noc
+ - qcom,sm8650-pcie-anoc
+ then:
+ required:
+ - clocks
+ else:
+ properties:
+ clocks: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ clk_virt: interconnect-0 {
+ compatible = "qcom,sm8650-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sm8650-aggre1-noc";
+ reg = <0x016e0000 0x14400>;
+ #interconnect-cells = <2>;
+ clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100
+
+maintainers:
+ - Rajendra Nayak <quic_rjendra@quicinc.com>
+ - Abel Vesa <abel.vesa@linaro.org>
+
+description: |
+ RPMh interconnect providers support system bandwidth requirements through
+ RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+ able to communicate with the BCM through the Resource State Coordinator (RSC)
+ associated with each execution environment. Provider nodes must point to at
+ least one RPMh device child node pertaining to their RSC and each provider
+ can map to multiple RPMh resources.
+
+ See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,x1e80100-aggre1-noc
+ - qcom,x1e80100-aggre2-noc
+ - qcom,x1e80100-clk-virt
+ - qcom,x1e80100-cnoc-cfg
+ - qcom,x1e80100-cnoc-main
+ - qcom,x1e80100-gem-noc
+ - qcom,x1e80100-lpass-ag-noc
+ - qcom,x1e80100-lpass-lpiaon-noc
+ - qcom,x1e80100-lpass-lpicx-noc
+ - qcom,x1e80100-mc-virt
+ - qcom,x1e80100-mmss-noc
+ - qcom,x1e80100-nsp-noc
+ - qcom,x1e80100-pcie-center-anoc
+ - qcom,x1e80100-pcie-north-anoc
+ - qcom,x1e80100-pcie-south-anoc
+ - qcom,x1e80100-system-noc
+ - qcom,x1e80100-usb-center-anoc
+ - qcom,x1e80100-usb-north-anoc
+ - qcom,x1e80100-usb-south-anoc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+
+allOf:
+ - $ref: qcom,rpmh-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,x1e80100-clk-virt
+ - qcom,x1e80100-mc-virt
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ clk_virt: interconnect-0 {
+ compatible = "qcom,x1e80100-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,x1e80100-aggre1-noc";
+ reg = <0x016e0000 0x14400>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
description: |
This interrupt controller is found in the Loongson-3 family of chips and
- Loongson-2K1000 chip, as the primary package interrupt controller which
+ Loongson-2K series chips, as the primary package interrupt controller which
can route local I/O interrupt to interrupt lines of cores.
+ Be aware of the following points.
+ 1.The Loongson-2K0500 is a single core CPU;
+ 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we
+ need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt
+ sources respectively.
allOf:
- $ref: /schemas/interrupt-controller.yaml#
- const: main
- const: isr0
- const: isr1
+ minItems: 2
interrupt-controller: true
interrupt-names:
description: List of names for the parent interrupts.
items:
- - const: int0
- - const: int1
- - const: int2
- - const: int3
+ pattern: int[0-3]
minItems: 1
+ maxItems: 4
'#interrupt-cells':
const: 2
- compatible
- reg
- interrupts
+ - interrupt-names
- interrupt-controller
- '#interrupt-cells'
- loongson,parent_int_map
then:
properties:
reg:
- minItems: 3
+ minItems: 2
+ maxItems: 3
required:
- reg-names
maxItems: 1
description:
Specifies the base address and size of vMPM registers in RPM MSG RAM.
+ deprecated: true
+
+ qcom,rpm-msg-ram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the APSS MPM slice of the RPM Message RAM
interrupts:
maxItems: 1
required:
- compatible
- - reg
- interrupts
- mboxes
- interrupt-controller
- '#interrupt-cells'
- qcom,mpm-pin-count
- qcom,mpm-pin-map
+ - qcom,rpm-msg-ram
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- mpm: interrupt-controller@45f01b8 {
- compatible = "qcom,mpm";
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- reg = <0x45f01b8 0x1000>;
- mboxes = <&apcs_glb 1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- qcom,mpm-pin-count = <96>;
- qcom,mpm-pin-map = <2 275>,
- <5 296>,
- <12 422>,
- <24 79>,
- <86 183>,
- <90 260>,
- <91 260>;
- #power-domain-cells = <0>;
+
+ remoteproc-rpm {
+ compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+ };
+
+ mpm: interrupt-controller {
+ compatible = "qcom,mpm";
+ qcom,rpm-msg-ram = <&apss_mpm>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <2 275>,
+ <5 296>,
+ <12 422>,
+ <24 79>,
+ <86 183>,
+ <91 260>;
+ #power-domain-cells = <0>;
+ };
};
- qcom,sdm845-pdc
- qcom,sdx55-pdc
- qcom,sdx65-pdc
+ - qcom,sdx75-pdc
- qcom,sm4450-pdc
- qcom,sm6350-pdc
- qcom,sm8150-pdc
- qcom,sm8250-pdc
- qcom,sm8350-pdc
- qcom,sm8450-pdc
+ - qcom,sm8550-pdc
+ - qcom,sm8650-pdc
+ - qcom,x1e80100-pdc
- const: qcom,pdc
reg:
- renesas,r9a07g043u-irqc # RZ/G2UL
- renesas,r9a07g044-irqc # RZ/G2{L,LC}
- renesas,r9a07g054-irqc # RZ/V2L
+ - renesas,r9a08g045-irqc # RZ/G3S
- const: renesas,rzg2l-irqc
'#interrupt-cells':
properties:
compatible:
contains:
- const: renesas,r9a07g043u-irqc
+ enum:
+ - renesas,r9a07g043u-irqc
+ - renesas,r9a08g045-irqc
then:
properties:
interrupts:
- enum:
- allwinner,sun20i-d1-plic
- sophgo,cv1800b-plic
+ - sophgo,cv1812h-plic
- sophgo,sg2042-plic
- thead,th1520-plic
- const: thead,c900-plic
- |
#include <dt-bindings/interrupt-controller/irq-st.h>
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_cpu>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
compatible:
enum:
- apple,t8103-dart
+ - apple,t8103-usb4-dart
- apple,t8110-dart
- apple,t6000-dart
- qcom,sm8350-smmu-500
- qcom,sm8450-smmu-500
- qcom,sm8550-smmu-500
+ - qcom,sm8650-smmu-500
+ - qcom,x1e80100-smmu-500
- const: qcom,smmu-500
- const: arm,mmu-500
- qcom,sm8150-smmu-500
- qcom,sm8250-smmu-500
- qcom,sm8350-smmu-500
+ - qcom,sm8450-smmu-500
+ - qcom,sm8550-smmu-500
- const: qcom,adreno-smmu
- const: qcom,smmu-500
- const: arm,mmu-500
- description: interface clock required to access smmu's registers
through the TCU's programming interface.
+ - if:
+ properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sm8350-smmu-500
+ - const: qcom,adreno-smmu
+ - const: qcom,smmu-500
+ - const: arm,mmu-500
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: ahb
+ - const: hlos1_vote_gpu_smmu
+ - const: cx_gmu
+ - const: hub_cx_int
+ - const: hub_aon
+ clocks:
+ minItems: 7
+ maxItems: 7
+
- if:
properties:
compatible:
- description: Voter clock required for HLOS SMMU access
- description: Interface clock required for register access
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm8450-smmu-500
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: gmu
+ - const: hub
+ - const: hlos
+ - const: bus
+ - const: iface
+ - const: ahb
+
+ clocks:
+ items:
+ - description: GMU clock
+ - description: GPU HUB clock
+ - description: HLOS vote clock
+ - description: GPU memory bus clock
+ - description: GPU SNoC bus clock
+ - description: GPU AHB clock
+
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm8550-smmu-500
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: hlos
+ - const: bus
+ - const: iface
+ - const: ahb
+
+ clocks:
+ items:
+ - description: HLOS vote clock
+ - description: GPU memory bus clock
+ - description: GPU SNoC bus clock
+ - description: GPU AHB clock
+
# Disallow clocks for all other platforms with specific compatibles
- if:
properties:
- qcom,sdx65-smmu-500
- qcom,sm6350-smmu-500
- qcom,sm6375-smmu-500
- - qcom,sm8350-smmu-500
- - qcom,sm8450-smmu-500
- - qcom,sm8550-smmu-500
+ - qcom,sm8650-smmu-500
+ - qcom,x1e80100-smmu-500
then:
properties:
clock-names: false
properties:
compatible:
- enum:
- - rockchip,iommu
- - rockchip,rk3568-iommu
+ oneOf:
+ - enum:
+ - rockchip,iommu
+ - rockchip,rk3568-iommu
+ - items:
+ - enum:
+ - rockchip,rk3588-iommu
+ - const: rockchip,rk3568-iommu
reg:
items:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller
+
+maintainers:
+ - Samuel Holland <samuel@sholland.org>
+
+description:
+ The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+ interface to drive up to 1024 RGB LEDs.
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun50i-a100-ledc
+ - items:
+ - enum:
+ - allwinner,sun20i-d1-ledc
+ - allwinner,sun50i-r329-ledc
+ - const: allwinner,sun50i-a100-ledc
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus clock
+ - description: Module clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+ description: TX DMA channel
+
+ dma-names:
+ const: tx
+
+ allwinner,pixel-format:
+ description: Pixel format (subpixel transmission order), default is "grb"
+ enum:
+ - bgr
+ - brg
+ - gbr
+ - grb
+ - rbg
+ - rgb
+
+ allwinner,t0h-ns:
+ default: 336
+ description: Length of high pulse when transmitting a "0" bit
+
+ allwinner,t0l-ns:
+ default: 840
+ description: Length of low pulse when transmitting a "0" bit
+
+ allwinner,t1h-ns:
+ default: 882
+ description: Length of high pulse when transmitting a "1" bit
+
+ allwinner,t1l-ns:
+ default: 294
+ description: Length of low pulse when transmitting a "1" bit
+
+ allwinner,treset-ns:
+ default: 300000
+ description: Minimum delay between transmission frames
+
+patternProperties:
+ "^multi-led@[0-9a-f]+$":
+ type: object
+ $ref: leds-class-multicolor.yaml#
+ unevaluatedProperties: false
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1023
+ description: Index of the LED in the series (must be contiguous)
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ ledc: led-controller@2008000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu 12>, <&ccu 34>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 12>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
+
+...
- Martin Kurbanov <mmkurbanov@sberdevices.ru>
description: |
- This controller is present on AW20036/AW20054/AW20072.
- It is a 3x12/6x9/6x12 matrix LED programmed via
- an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
- 3 pattern controllers for auto breathing or group dimming control.
+ It is a matrix LED driver programmed via an I2C interface. Devices have
+ a set of individually controlled leds and support 3 pattern controllers
+ for auto breathing or group dimming control. Supported devices:
+ - AW20036 (3x12) 36 LEDs
+ - AW20054 (6x9) 54 LEDs
+ - AW20072 (6x12) 72 LEDs
+ - AW20108 (9x12) 108 LEDs
For more product information please see the link below:
aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+ aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs
properties:
compatible:
- awinic,aw20036
- awinic,aw20054
- awinic,aw20072
+ - awinic,aw20108
reg:
maxItems: 1
"#size-cells":
const: 0
- awinic,display-rows:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Leds matrix size
+ enable-gpios:
+ maxItems: 1
patternProperties:
- "^led@[0-9a-f]$":
+ "^led@[0-9a-f]+$":
type: object
$ref: common.yaml#
unevaluatedProperties: false
since the chip has a single global setting.
The maximum output current of each LED is calculated by the
following formula:
- IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+ IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
And the minimum output current formula:
- IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
-
-required:
- - compatible
- - reg
- - "#address-cells"
- - "#size-cells"
- - awinic,display-rows
+ IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+ where max-current-switch-number is determinated by led configuration
+ and depends on how leds are physically connected to the led driver.
allOf:
- if:
contains:
const: awinic,aw20036
then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 36
+
+ - if:
properties:
- awinic,display-rows:
- enum: [1, 2, 3]
- else:
+ compatible:
+ contains:
+ const: awinic,aw20054
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 54
+
+ - if:
properties:
- awinic,display-rows:
- enum: [1, 2, 3, 4, 5, 6, 7]
+ compatible:
+ contains:
+ const: awinic,aw20072
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 72
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: awinic,aw20108
+ then:
+ patternProperties:
+ "^led@[0-9a-f]+$":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 108
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
additionalProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
i2c {
reg = <0x3a>;
#address-cells = <1>;
#size-cells = <0>;
- awinic,display-rows = <3>;
+ enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
led@0 {
reg = <0x0>;
programmable switching frequency to optimize efficiency.
It supports two different dimming modes:
- - analog mode, via I2C commands (default)
- - PWM controlled mode.
+ - analog mode, via I2C commands, as default mode (32 dimming levels)
+ - PWM controlled mode (optional)
The datasheet is available at:
https://www.monolithicpower.com/en/mp3309c.html
required:
- compatible
- reg
- - max-brightness
- - default-brightness
unevaluatedProperties: false
compatible = "mps,mp3309c";
reg = <0x17>;
pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
- max-brightness = <100>;
- default-brightness = <80>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness = <6>;
mps,overvoltage-protection-microvolt = <24000000>;
};
};
Note that this flag is mainly used for PWM-LEDs, where it is not possible
to map brightness to current. Drivers for other controllers should use
led-max-microamp.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
panic-indicator:
description:
examples:
- |
#include <dt-bindings/leds/common.h>
- spmi {
+
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
+
led-controller@ee00 {
compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
reg = <0xee00>;
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPUs
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description:
+ This document describes the list of LoongArch CPU cores that support FDT,
+ it describe the layout of CPUs in a system through the "cpus" node.
+
+allOf:
+ - $ref: /schemas/cpu.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,la264
+ - loongson,la364
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu@0 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
+ };
+
+ cpu@1 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
+ };
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SoC-based boards
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Loongson-2K0500 processor based boards
+ items:
+ - const: loongson,ls2k0500-ref
+ - const: loongson,ls2k0500
+
+ - description: Loongson-2K1000 processor based boards
+ items:
+ - const: loongson,ls2k1000-ref
+ - const: loongson,ls2k1000
+
+ - description: Loongson-2K2000 processor based boards
+ items:
+ - const: loongson,ls2k2000-ref
+ - const: loongson,ls2k2000
+
+additionalProperties: true
+
+...
- qcom,ipq8074-apcs-apps-global
- qcom,ipq9574-apcs-apps-global
- const: qcom,ipq6018-apcs-apps-global
+ - items:
+ - enum:
+ - qcom,qcs404-apcs-apps-global
+ - const: qcom,msm8916-apcs-kpss-global
+ - const: syscon
+ - items:
+ - enum:
+ - qcom,msm8976-apcs-kpss-global
+ - const: qcom,msm8994-apcs-kpss-global
+ - const: syscon
+ - items:
+ - enum:
+ - qcom,msm8998-apcs-hmss-global
+ - qcom,sdm660-apcs-hmss-global
+ - qcom,sm4250-apcs-hmss-global
+ - qcom,sm6115-apcs-hmss-global
+ - qcom,sm6125-apcs-hmss-global
+ - const: qcom,msm8994-apcs-kpss-global
- items:
- enum:
- qcom,sc7180-apss-shared
- qcom,msm8916-apcs-kpss-global
- qcom,msm8939-apcs-kpss-global
- qcom,msm8953-apcs-kpss-global
- - qcom,msm8976-apcs-kpss-global
- qcom,msm8994-apcs-kpss-global
- - qcom,qcs404-apcs-apps-global
- qcom,sdx55-apcs-gcc
- const: syscon
- enum:
- qcom,ipq6018-apcs-apps-global
- - qcom,ipq8074-apcs-apps-global
- qcom,msm8996-apcs-hmss-global
- - qcom,msm8998-apcs-hmss-global
- qcom,qcm2290-apcs-hmss-global
- - qcom,sdm660-apcs-hmss-global
- qcom,sdm845-apss-shared
- - qcom,sm4250-apcs-hmss-global
- - qcom,sm6115-apcs-hmss-global
- - qcom,sm6125-apcs-hmss-global
reg:
maxItems: 1
- if:
properties:
compatible:
- enum:
- - qcom,msm8916-apcs-kpss-global
- - qcom,msm8939-apcs-kpss-global
- - qcom,qcs404-apcs-apps-global
+ contains:
+ enum:
+ - qcom,msm8916-apcs-kpss-global
+ then:
+ properties:
+ clocks:
+ items:
+ - description: primary pll parent of the clock driver
+ - description: auxiliary parent
+ clock-names:
+ items:
+ - const: pll
+ - const: aux
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8939-apcs-kpss-global
then:
properties:
clocks:
items:
- description: primary pll parent of the clock driver
- description: auxiliary parent
+ - description: reference clock
clock-names:
items:
- const: pll
- const: aux
+ - const: ref
- if:
properties:
- const: ref
- const: pll
- const: aux
+
- if:
properties:
compatible:
compatible:
enum:
- qcom,msm8953-apcs-kpss-global
- - qcom,msm8976-apcs-kpss-global
- qcom,msm8994-apcs-kpss-global
- qcom,msm8996-apcs-hmss-global
- - qcom,msm8998-apcs-hmss-global
- qcom,qcm2290-apcs-hmss-global
- - qcom,sdm660-apcs-hmss-global
- qcom,sdm845-apss-shared
- - qcom,sm4250-apcs-hmss-global
- - qcom,sm6115-apcs-hmss-global
- - qcom,sm6125-apcs-hmss-global
then:
properties:
clocks: false
#define GCC_APSS_AHB_CLK_SRC 1
#define GCC_GPLL0_AO_OUT_MAIN 123
apcs: mailbox@b011000 {
- compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+ compatible = "qcom,qcs404-apcs-apps-global",
+ "qcom,msm8916-apcs-kpss-global", "syscon";
reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
- qcom,sm8450-ipcc
- qcom,sm8550-ipcc
- qcom,sm8650-ipcc
+ - qcom,x1e80100-ipcc
- const: qcom,ipcc
reg:
properties:
compatible:
- const: xlnx,zynqmp-ipi-mailbox
+ enum:
+ - xlnx,zynqmp-ipi-mailbox
+ - xlnx,versal-ipi-mailbox
method:
description: |
'#size-cells':
const: 2
+ reg:
+ maxItems: 2
+
+ reg-names:
+ maxItems: 2
+
xlnx,ipi-id:
description: |
Remote Xilinx IPI agent ID of which the mailbox is connected to.
properties:
compatible:
- const: xlnx,zynqmp-ipi-dest-mailbox
+ enum:
+ - xlnx,zynqmp-ipi-dest-mailbox
+ - xlnx,versal-ipi-dest-mailbox
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
xlnx,ipi-id:
description:
description:
It contains tx(0) or rx(1) channel IPI id number.
- reg:
- maxItems: 4
-
- reg-names:
- items:
- - const: local_request_region
- - const: local_response_region
- - const: remote_request_region
- - const: remote_response_region
+ allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-ipi-dest-mailbox
+ then:
+ properties:
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: local_request_region
+ - const: local_response_region
+ - const: remote_request_region
+ - const: remote_response_region
+ else:
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: Remote IPI agent control register region
+ - description: Remote IPI agent optional message buffers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: ctrl
+ - const: msg
required:
- compatible
- reg
- reg-names
- "#mbox-cells"
-
-additionalProperties: false
+ - xlnx,ipi-id
required:
- compatible
- '#size-cells'
- xlnx,ipi-id
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-ipi-mailbox
+ then:
+ properties:
+ reg: false
+ reg-names: false
+
+ else:
+ properties:
+ reg:
+ items:
+ - description: Host IPI agent control register region
+ - description: Host IPI agent optional message buffers
+
+ reg-names:
+ items:
+ - const: ctrl
+ - const: msg
+
+ required:
+ - reg
+ - reg-names
+
+additionalProperties: false
+
examples:
- |
#include<dt-bindings/interrupt-controller/arm-gic.h>
};
};
+ - |
+ #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ mailbox@ff300000 {
+ compatible = "xlnx,versal-ipi-mailbox";
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0xff300000 0x0 0x1000>,
+ <0x0 0xff990000 0x0 0x1ff>;
+ reg-names = "ctrl", "msg";
+ xlnx,ipi-id = <0>;
+ ranges;
+
+ /* buffered IPI */
+ mailbox@ff340000 {
+ compatible = "xlnx,versal-ipi-dest-mailbox";
+ reg = <0x0 0xff340000 0x0 0x1000>,
+ <0x0 0xff990400 0x0 0x1ff>;
+ reg-names = "ctrl", "msg";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <4>;
+ };
+
+ /* bufferless IPI */
+ mailbox@ff370000 {
+ compatible = "xlnx,versal-ipi-dest-mailbox";
+ reg = <0x0 0xff370000 0x0 0x1000>;
+ reg-names = "ctrl";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <7>;
+ };
+ };
+ };
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Wave 5 Series multi-standard codec IP
+
+maintainers:
+ - Nas Chung <nas.chung@chipsnmedia.com>
+ - Jackson Lee <jackson.lee@chipsnmedia.com>
+
+description:
+ The Chips&Media WAVE codec IP is a multi format video encoder/decoder
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ti,j721s2-wave521c
+ - const: cnm,wave521c
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: VCODEC clock
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The VPU uses the SRAM to store some of the reference data instead of
+ storing it on DMA memory. It is mainly used for the purpose of reducing
+ bandwidth.
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ vpu: video-codec@12345678 {
+ compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+ reg = <0x12345678 0x1000>;
+ clocks = <&clks 42>;
+ interrupts = <42>;
+ sram = <&sram>;
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allied Vision Alvium Camera
+
+maintainers:
+ - Tommaso Merciai <tomm.merciai@gmail.com>
+ - Martin Hecht <martin.hecht@avnet.eu>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: alliedvision,alvium-csi2
+
+ reg:
+ maxItems: 1
+
+ vcc-ext-in-supply:
+ description: |
+ The regulator that supplies power to the VCC_EXT_IN pins.
+
+ port:
+ description: Digital Output Port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies: true
+
+ data-lanes:
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - vcc-ext-in-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ alvium: camera@3c {
+ compatible = "alliedvision,alvium-csi2";
+ reg = <0x3c>;
+ vcc-ext-in-supply = <®_vcc_ext_in>;
+
+ port {
+ alvium_out: endpoint {
+ remote-endpoint = <&mipi_csi_0_in>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <681250000>;
+ };
+ };
+ };
+ };
+
+...
properties:
compatible:
- const: asahi-kasei,ak7375
+ enum:
+ - asahi-kasei,ak7345
+ - asahi-kasei,ak7375
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxycore GC0308 and GC0309 Image Sensors
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors
+ programmable through an I2C interface and connected via parallel bus.
+ They include an ISP capable of auto exposure and auto white balance.
+
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: galaxycore,gc0308
+ - items:
+ - const: galaxycore,gc0309
+ - const: galaxycore,gc0308
+
+ reg:
+ const: 0x21
+
+ clocks:
+ description: Reference to the xclk clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO descriptor for the reset pin.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO descriptor for the powerdown pin.
+ maxItems: 1
+
+ vdd28-supply:
+ description: 2.8V supply
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: |
+ Video output port.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-width: true
+ data-shift: true
+ hsync-active: true
+ vsync-active: true
+ data-active: true
+ pclk-sample: true
+
+ required:
+ - bus-width
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - powerdown-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera-sensor@21 {
+ compatible = "galaxycore,gc0308";
+ reg = <0x21>;
+ clocks = <&camera_clk>;
+ powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ vdd28-supply = <&vdd28>;
+
+ port {
+ gc0308_ep: endpoint {
+ remote-endpoint = <¶llel_from_gc0308>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <1>; /* active high */
+ vsync-active = <1>; /* active high */
+ data-active = <1>; /* active high */
+ pclk-sample = <1>; /* sample on rising edge */
+ };
+ };
+ };
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+ - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+ The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+ phone camera applications and digital camera products. GC2145 incorporates a
+ 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+ processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+ gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+ sensor. It is programmable through an I2C interface. Image data is sent
+ either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: galaxycore,gc2145
+
+ reg:
+ const: 0x3c
+
+ clocks:
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ iovdd-supply:
+ description: Power Supply for I/O circuits (1.7 - 3V).
+
+ avdd-supply:
+ description: Power for analog circuit/sensor array (2.7 - 3V).
+
+ dvdd-supply:
+ description: Power for digital core (1.7 - 1.9V).
+
+ orientation: true
+
+ rotation: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies: true
+
+ required:
+ - link-frequencies
+
+ required:
+ - endpoint
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - powerdown-gpios
+ - reset-gpios
+ - iovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@3c {
+ compatible = "galaxycore,gc2145";
+ reg = <0x3c>;
+ clocks = <&clk_ext_camera>;
+ iovdd-supply = <&scmi_v3v3_sw>;
+ avdd-supply = <&scmi_v3v3_sw>;
+ dvdd-supply = <&scmi_v3v3_sw>;
+ powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+ reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mipid02_0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+ };
+ };
+ };
+ };
+
+...
properties:
data-lanes:
- description: |-
- The driver only supports four-lane operation.
- items:
- - const: 1
- - const: 2
- - const: 3
- - const: 4
-
- link-frequencies:
- description: Frequencies listed are driver, not h/w limitations.
- maxItems: 2
- items:
- enum: [ 360000000, 180000000 ]
+ oneOf:
+ - items:
+ - const: 1
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
required:
- link-frequencies
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV64A40 Image Sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: ovti,ov64a40
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog voltage supply, 2.8 volts
+
+ dvdd-supply:
+ description: Digital core voltage supply, 1.1 volts
+
+ dovdd-supply:
+ description: Digital I/O voltage supply, 1.8 volts
+
+ powerdown-gpios:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ additionalProperties: false
+
+ properties:
+ bus-type:
+ enum:
+ - 1 # MIPI CSI-2 C-PHY
+ - 4 # MIPI CSI-2 D-PHY
+ data-lanes: true
+ link-frequencies: true
+ clock-noncontinuous: true
+ remote-endpoint: true
+
+ required:
+ - bus-type
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@36 {
+ compatible = "ovti,ov64a40";
+ reg = <0x36>;
+ clocks = <&camera_clk>;
+ dovdd-supply = <&vgen4_reg>;
+ avdd-supply = <&vgen3_reg>;
+ dvdd-supply = <&vgen2_reg>;
+ powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ rotation = <180>;
+ orientation = <2>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ bus-type = <4>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+ };
+
+...
description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
maxItems: 1
+ avdd-supply:
+ description: Analog power supply (2.9V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ dvdd-supply:
+ description: Digital power supply (1.2V)
+
reset-gpios:
description: Reference to the GPIO connected to the XCLR pin, if any.
maxItems: 1
assigned-clock-parents = <&imx335_clk_parent>;
assigned-clock-rates = <24000000>;
+ avdd-supply = <&camera_vdda_2v9>;
+ ovdd-supply = <&camera_vddo_1v8>;
+ dvdd-supply = <&camera_vddd_1v2>;
+
port {
imx335: endpoint {
remote-endpoint = <&cam>;
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Techwell TW9900 NTSC/PAL video decoder
+
+maintainers:
+ - Mehdi Djait <mehdi.djait@bootlin.com>
+
+description:
+ The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards
+ with auto-detection features.
+
+properties:
+ compatible:
+ const: techwell,tw9900
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: VDD power supply
+
+ reset-gpios:
+ description: GPIO descriptor for the RESET input pin
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO descriptor for the POWERDOWN input pin
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: Analog input port
+
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: CVBS over MUX0
+
+ endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: CVBS over MUX1
+
+ endpoint@2:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Chroma over CIN0 and Y over MUX0
+
+ endpoint@3:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Chroma over CIN0 and Y over MUX1
+
+ oneOf:
+ - required:
+ - endpoint@0
+ - required:
+ - endpoint@1
+ - required:
+ - endpoint@2
+ - required:
+ - endpoint@3
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for the decoder output.
+
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - ports
+ - reg
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/display/sdtv-standards.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ composite_connector {
+ compatible = "composite-video-connector";
+ label = "tv";
+ sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+ port {
+ composite_to_tw9900: endpoint {
+ remote-endpoint = <&tw9900_to_composite>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ video-decoder@44 {
+ compatible = "techwell,tw9900";
+ reg = <0x44>;
+
+ vdd-supply = <&tw9900_supply>;
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+ tw9900_to_composite: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&composite_to_tw9900>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&cif_in>;
+ };
+ };
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Ideas on Board
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: THine THP7312
+
+maintainers:
+ - Paul Elder <paul.elder@@ideasonboard.com>
+
+description:
+ The THP7312 is a standalone ISP controlled over i2c, and is capable of
+ various image processing and correction functions, including 3A control. It
+ can be connected to CMOS image sensors from various vendors, supporting both
+ MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
+ or parallel. The hardware is capable of transmitting and receiving MIPI
+ interlaved data strams with data types or multiple virtual channel
+ identifiers.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: thine,thp7312
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: CLKI clock input
+
+ thine,boot-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1
+ default: 1
+ description:
+ Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
+ 0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
+ external flash ROM).
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Reference to the GPIO connected to the RESET_N pin, if any.
+ Must be released (set high) after all supplies are applied.
+
+ vddcore-supply:
+ description:
+ 1.2V supply for core, PLL, MIPI rx and MIPI tx.
+
+ vhtermrx-supply:
+ description:
+ Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+ vddtx-supply:
+ description:
+ Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+ vddhost-supply:
+ description:
+ Supply for host interface. 1.8V, 2.8V, or 3.3V.
+
+ vddcmos-supply:
+ description:
+ Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
+
+ vddgpio-0-supply:
+ description:
+ Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
+
+ vddgpio-1-supply:
+ description:
+ Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
+
+ orientation: true
+ rotation: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-type:
+ const: 4 # CSI-2 D-PHY
+
+ data-lanes:
+ description:
+ This property is for lane reordering between the THP7312 and the
+ SoC. The sensor supports either two-lane, or four-lane operation.
+ If this property is omitted four-lane operation is assumed. For
+ two-lane operation the property must be set to <1 2>.
+ minItems: 2
+ maxItems: 4
+ items:
+ maximum: 4
+
+ sensors:
+ type: object
+ description: List of connected sensors
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^sensor@[01]$":
+ type: object
+ description:
+ Sensors connected to the first and second input, with one node per
+ sensor.
+
+ properties:
+ thine,model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Model of the connected sensors. Must be a valid compatible string.
+
+ reg:
+ description: THP7312 input port number
+ items:
+ - maximum: 1
+
+ data-lanes:
+ $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
+ items:
+ maxItems: 4
+ description:
+ This property is for lane reordering between the THP7312 and the imaging
+ sensor that it is connected to.
+
+ required:
+ - reg
+ - data-lanes
+
+ additionalProperties: false
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - clocks
+ - vddcore-supply
+ - vhtermrx-supply
+ - vddtx-supply
+ - vddhost-supply
+ - vddcmos-supply
+ - vddgpio-0-supply
+ - vddgpio-1-supply
+ - sensors
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@61 {
+ compatible = "thine,thp7312";
+ reg = <0x61>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam1_pins_default>;
+
+ reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+ clocks = <&camera61_clk>;
+
+ vddcore-supply = <&vsys_v4p2>;
+ vhtermrx-supply = <&vsys_v4p2>;
+ vddtx-supply = <&vsys_v4p2>;
+ vddhost-supply = <&vsys_v4p2>;
+ vddcmos-supply = <&vsys_v4p2>;
+ vddgpio-0-supply = <&vsys_v4p2>;
+ vddgpio-1-supply = <&vsys_v4p2>;
+
+ orientation = <0>;
+ rotation = <0>;
+
+ sensors {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@0 {
+ thine,model = "sony,imx258";
+ reg = <0>;
+
+ data-lanes = <4 1 3 2>;
+ };
+ };
+
+ port {
+ thp7312_2_endpoint: endpoint {
+ remote-endpoint = <&mipi_thp7312_2>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <4 2 1 3>;
+ };
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Film Grain
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+ Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add
+ the film grain according to the AOMedia Video 1 (AV1) standard.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-mdp3-fg
+
+ reg:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - mediatek,gce-client-reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ display@14002000 {
+ compatible = "mediatek,mt8195-mdp3-fg";
+ reg = <0x14002000 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 HDR
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+ A Media Data Path 3 (MDP3) component used to perform conversion from
+ High Dynamic Range (HDR) to Standard Dynamic Range (SDR).
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-mdp3-hdr
+
+ reg:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - mediatek,gce-client-reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ display@14004000 {
+ compatible = "mediatek,mt8195-mdp3-hdr";
+ reg = <0x14004000 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+ };
properties:
compatible:
- items:
- - const: mediatek,mt8183-mdp3-rdma
+ oneOf:
+ - enum:
+ - mediatek,mt8183-mdp3-rdma
+ - mediatek,mt8195-mdp3-rdma
+ - mediatek,mt8195-vdo1-rdma
+ - items:
+ - const: mediatek,mt8188-vdo1-rdma
+ - const: mediatek,mt8195-vdo1-rdma
reg:
maxItems: 1
include/dt-bindings/gce/<chip>-gce.h of each chips.
$ref: /schemas/types.yaml#/definitions/uint32-array
+ mediatek,scp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the System Control Processor (SCP) used for initializing
+ and stopping the MDP3, for sending frame data locations to the MDP3's
+ VPU and to install Inter-Processor Interrupt handlers to control
+ processing states.
+
power-domains:
maxItems: 1
items:
- description: RDMA clock
- description: RSZ clock
+ minItems: 1
iommus:
maxItems: 1
items:
- description: used for 1st data pipe from RDMA
- description: used for 2nd data pipe from RDMA
+ - description: used for 3rd data pipe from RDMA
+ - description: used for 4th data pipe from RDMA
+ - description: used for the data pipe from SPLIT
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#dma-cells':
+ const: 1
required:
- compatible
- reg
- mediatek,gce-client-reg
- - mediatek,gce-events
- power-domains
- clocks
- iommus
- - mboxes
+ - '#dma-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8183-mdp3-rdma
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ mboxes:
+ minItems: 2
+
+ required:
+ - mboxes
+ - mediatek,gce-events
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8195-mdp3-rdma
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ mboxes:
+ minItems: 5
+
+ required:
+ - mediatek,gce-events
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8195-vdo1-rdma
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
additionalProperties: false
#include <dt-bindings/power/mt8183-power.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
- mdp3_rdma0: mdp3-rdma0@14001000 {
- compatible = "mediatek,mt8183-mdp3-rdma";
- reg = <0x14001000 0x1000>;
- mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
- mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
- <CMDQ_EVENT_MDP_RDMA0_EOF>;
- power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
- clocks = <&mmsys CLK_MM_MDP_RDMA0>,
- <&mmsys CLK_MM_MDP_RSZ1>;
- iommus = <&iommu>;
- mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
- <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+ dma-controller@14001000 {
+ compatible = "mediatek,mt8183-mdp3-rdma";
+ reg = <0x14001000 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+ <CMDQ_EVENT_MDP_RDMA0_EOF>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+ <&mmsys CLK_MM_MDP_RSZ1>;
+ iommus = <&iommu>;
+ mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+ <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+ #dma-cells = <1>;
};
properties:
compatible:
- items:
+ oneOf:
- enum:
- mediatek,mt8183-mdp3-rsz
+ - items:
+ - enum:
+ - mediatek,mt8195-mdp3-rsz
+ - const: mediatek,mt8183-mdp3-rsz
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 STITCH
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+ One of Media Data Path 3 (MDP3) components used to combine multiple video frame
+ with overlapping fields of view to produce a segmented panorame.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-mdp3-stitch
+
+ reg:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - mediatek,gce-client-reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ display@14003000 {
+ compatible = "mediatek,mt8195-mdp3-stitch";
+ reg = <0x14003000 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_STITCH>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Tone Curve Conversion
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+ Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components.
+ It is used to handle the tone mapping of various gamma curves in order to
+ achieve HDR10 effects. This helps adapt the content to the color and
+ brightness range that standard display devices typically support.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-mdp3-tcc
+
+ reg:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - mediatek,gce-client-reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ display@1400b000 {
+ compatible = "mediatek,mt8195-mdp3-tcc";
+ reg = <0x1400b000 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Two-Dimensional Sharpness
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+ - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+ Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component
+ used to perform image edge sharpening and enhance vividness and contrast.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8195-mdp3-tdshp
+
+ reg:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - mediatek,gce-client-reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ display@14007000 {
+ compatible = "mediatek,mt8195-mdp3-tdshp";
+ reg = <0x14007000 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+ };
properties:
compatible:
- items:
+ oneOf:
- enum:
- mediatek,mt8183-mdp3-wrot
+ - items:
+ - enum:
+ - mediatek,mt8195-mdp3-wrot
+ - const: mediatek,mt8183-mdp3-wrot
reg:
maxItems: 1
iommus:
maxItems: 1
+ '#dma-cells':
+ const: 1
+
required:
- compatible
- reg
- power-domains
- clocks
- iommus
+ - '#dma-cells'
additionalProperties: false
#include <dt-bindings/power/mt8183-power.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
- mdp3_wrot0: mdp3-wrot0@14005000 {
- compatible = "mediatek,mt8183-mdp3-wrot";
- reg = <0x14005000 0x1000>;
- mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
- mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
- <CMDQ_EVENT_MDP_WROT0_EOF>;
- power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
- clocks = <&mmsys CLK_MM_MDP_WROT0>;
- iommus = <&iommu>;
+ dma-controller@14005000 {
+ compatible = "mediatek,mt8183-mdp3-wrot";
+ reg = <0x14005000 0x1000>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+ <CMDQ_EVENT_MDP_WROT0_EOF>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_MDP_WROT0>;
+ iommus = <&iommu>;
+ #dma-cells = <1>;
};
description: connection point for input on the parallel interface
properties:
- bus-type:
- enum: [5, 6]
-
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
- required:
- - bus-type
+ properties:
+ bus-type:
+ enum: [5, 6]
+
+ required:
+ - bus-type
anyOf:
- required:
- samsung,mfc-v7 # Exynos5420
- samsung,mfc-v8 # Exynos5800
- samsung,mfc-v10 # Exynos7880
+ - tesla,fsd-mfc # Tesla FSD
- items:
- enum:
- samsung,exynos3250-mfc # Exynos3250
iommu-names:
minItems: 1
- maxItems: 2
+ items:
+ - const: left
+ - const: right
power-domains:
maxItems: 1
- const: sclk_mfc
iommus:
maxItems: 1
- iommus-names: false
+ iommu-names: false
- if:
properties:
- const: aclk
- const: aclk_xiu
iommus:
- maxItems: 2
- iommus-names:
- items:
- - const: left
- - const: right
+ minItems: 2
+ iommu-names:
+ minItems: 2
- if:
properties:
- const: mfc
- const: sclk_mfc
iommus:
- maxItems: 2
- iommus-names:
- items:
- - const: left
- - const: right
+ minItems: 2
+ iommu-names:
+ minItems: 2
- if:
properties:
items:
- const: mfc
iommus:
- maxItems: 2
- iommus-names:
- items:
- - const: left
- - const: right
+ minItems: 2
+ iommu-names:
+ minItems: 2
- if:
properties:
clocks:
minItems: 1
maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - tesla,fsd-mfc
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: mfc
iommus:
- minItems: 1
maxItems: 2
+ iommus-names: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor
+
+maintainers:
+ - Hugues Fruchet <hugues.fruchet@foss.st.com>
+ - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+ compatible:
+ const: st,stm32mp13-dcmipp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ DCMIPP supports a single port node with parallel bus.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-type:
+ enum: [5, 6]
+ default: 5
+
+ bus-width:
+ enum: [8, 10, 12, 14]
+ default: 8
+
+ pclk-sample: true
+ hsync-active: true
+ vsync-active: true
+
+ required:
+ - pclk-sample
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp13-clks.h>
+ #include <dt-bindings/reset/stm32mp13-resets.h>
+ dcmipp@5a000000 {
+ compatible = "st,stm32mp13-dcmipp";
+ reg = <0x5a000000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc DCMIPP_R>;
+ clocks = <&rcc DCMIPP_K>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mipid02_2>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC CAMSS ISP
+
+maintainers:
+ - Jack Zhu <jack.zhu@starfivetech.com>
+ - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+ The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
+ consists of a VIN controller (Video In Controller, a top-level control unit)
+ and an ISP.
+
+properties:
+ compatible:
+ const: starfive,jh7110-camss
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: syscon
+ - const: isp
+
+ clocks:
+ maxItems: 7
+
+ clock-names:
+ items:
+ - const: apb_func
+ - const: wrapper_clk_c
+ - const: dvp_inv
+ - const: axiwr
+ - const: mipi_rx0_pxl
+ - const: ispcore_2x
+ - const: isp_axi
+
+ resets:
+ maxItems: 6
+
+ reset-names:
+ items:
+ - const: wrapper_p
+ - const: wrapper_c
+ - const: axird
+ - const: axiwr
+ - const: isp_top_n
+ - const: isp_top_axi
+
+ power-domains:
+ items:
+ - description: JH7110 ISP Power Domain Switch Controller.
+
+ interrupts:
+ maxItems: 4
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Input port for receiving DVP data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-type:
+ enum: [5, 6]
+
+ bus-width:
+ enum: [8, 10, 12]
+
+ data-shift:
+ enum: [0, 2]
+ default: 0
+
+ hsync-active:
+ enum: [0, 1]
+ default: 1
+
+ vsync-active:
+ enum: [0, 1]
+ default: 1
+
+ required:
+ - bus-type
+ - bus-width
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port for receiving CSI data.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - interrupts
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ isp@19840000 {
+ compatible = "starfive,jh7110-camss";
+ reg = <0x19840000 0x10000>,
+ <0x19870000 0x30000>;
+ reg-names = "syscon", "isp";
+ clocks = <&ispcrg 0>,
+ <&ispcrg 13>,
+ <&ispcrg 2>,
+ <&ispcrg 12>,
+ <&ispcrg 1>,
+ <&syscrg 51>,
+ <&syscrg 52>;
+ clock-names = "apb_func",
+ "wrapper_clk_c",
+ "dvp_inv",
+ "axiwr",
+ "mipi_rx0_pxl",
+ "ispcore_2x",
+ "isp_axi";
+ resets = <&ispcrg 0>,
+ <&ispcrg 1>,
+ <&ispcrg 10>,
+ <&ispcrg 11>,
+ <&syscrg 41>,
+ <&syscrg 42>;
+ reset-names = "wrapper_p",
+ "wrapper_c",
+ "axird",
+ "axiwr",
+ "isp_top_n",
+ "isp_top_axi";
+ power-domains = <&pwrc 5>;
+ interrupts = <92>, <87>, <88>, <90>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ vin_from_sc2235: endpoint {
+ remote-endpoint = <&sc2235_to_vin>;
+ bus-type = <5>;
+ bus-width = <8>;
+ data-shift = <2>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ vin_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_vin>;
+ };
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger
+
+maintainers:
+ - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
+
+description:
+ AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
+ power supplies, a battery charger and an RTC. So far only bindings for the
+ two step-up DC/DC converters are defined.
+
+properties:
+ compatible:
+ const: ams,as3711
+
+ reg:
+ maxItems: 1
+
+ backlight:
+ description:
+ Step-up converter configuration, to be used as a backlight source
+ type: object
+ additionalProperties: false
+ properties:
+ compatible:
+ const: ams,as3711-bl
+
+ su1-dev:
+ description: Framebuffer phandle for the first step-up converter
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ su1-max-uA:
+ description: Maximum current for the first step-up converter
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ su2-dev:
+ description: Framebuffer phandle for the second step-up converter
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ su2-max-uA:
+ description: Maximum current for the second step-up converter
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ su2-feedback-voltage:
+ description: Second step-up converter uses voltage feedback
+ type: boolean
+
+ su2-feedback-curr1:
+ description:
+ Second step-up converter uses CURR1 input for current feedback
+ type: boolean
+
+ su2-feedback-curr2:
+ description:
+ Second step-up converter uses CURR2 input for current feedback
+ type: boolean
+
+ su2-feedback-curr3:
+ description:
+ Second step-up converter uses CURR3 input for current feedback
+ type: boolean
+
+ su2-feedback-curr-auto:
+ description:
+ Second step-up converter uses automatic current feedback selection
+ type: boolean
+
+ su2-fbprot-lx-sd4:
+ description:
+ Second step-up converter uses LX_SD4 for over-voltage protection
+ type: boolean
+
+ su2-fbprot-gpio2:
+ description:
+ Second step-up converter uses GPIO2 for over-voltage protection
+ type: boolean
+
+ su2-fbprot-gpio3:
+ description:
+ Second step-up converter uses GPIO3 for over-voltage protection
+ type: boolean
+
+ su2-fbprot-gpio4:
+ description:
+ Second step-up converter uses GPIO4 for over-voltage protection
+ type: boolean
+
+ su2-auto-curr1:
+ description:
+ Second step-up converter uses CURR1 input for automatic current
+ feedback
+ type: boolean
+
+ su2-auto-curr2:
+ description:
+ Second step-up converter uses CURR2 input for automatic current
+ feedback
+ type: boolean
+
+ su2-auto-curr3:
+ description:
+ Second step-up converter uses CURR3 input for automatic current
+ feedback
+ type: boolean
+
+ required:
+ - compatible
+
+ dependentRequired:
+ # To use the SU1 converter as a backlight source the following two
+ # properties must be provided:
+ su1-dev: [ su1-max-uA ]
+ su1-max-uA: [ su1-dev ]
+
+ # To use the SU2 converter as a backlight source the following two
+ # properties must be provided:
+ su2-dev: [ su2-max-uA ]
+ su2-max-uA: [ su2-dev ]
+
+ su2-feedback-voltage: [ su2-dev ]
+ su2-feedback-curr1: [ su2-dev ]
+ su2-feedback-curr2: [ su2-dev ]
+ su2-feedback-curr3: [ su2-dev ]
+ su2-feedback-curr-auto: [ su2-dev ]
+ su2-fbprot-lx-sd4: [ su2-dev ]
+ su2-fbprot-gpio2: [ su2-dev ]
+ su2-fbprot-gpio3: [ su2-dev ]
+ su2-fbprot-gpio4: [ su2-dev ]
+ su2-auto-curr1: [ su2-feedback-curr-auto ]
+ su2-auto-curr2: [ su2-feedback-curr-auto ]
+ su2-auto-curr3: [ su2-feedback-curr-auto ]
+
+ dependentSchemas:
+ su2-dev:
+ allOf:
+ - oneOf:
+ - required:
+ - su2-feedback-voltage
+ - required:
+ - su2-feedback-curr1
+ - required:
+ - su2-feedback-curr2
+ - required:
+ - su2-feedback-curr3
+ - required:
+ - su2-feedback-curr-auto
+ - oneOf:
+ - required:
+ - su2-fbprot-lx-sd4
+ - required:
+ - su2-fbprot-gpio2
+ - required:
+ - su2-fbprot-gpio3
+ - required:
+ - su2-fbprot-gpio4
+
+ su2-feedback-curr-auto:
+ anyOf:
+ - required:
+ - su2-auto-curr1
+ - required:
+ - su2-auto-curr2
+ - required:
+ - su2-auto-curr3
+
+ regulators:
+ description: Other DC/DC and LDO supplies
+ type: object
+ unevaluatedProperties: false
+ patternProperties:
+ "^(sd[1-4]|ldo[1-8])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ backlight {
+ compatible = "ams,as3711-bl";
+ su2-dev = <&lcdc>;
+ su2-max-uA = <36000>;
+ su2-feedback-curr-auto;
+ su2-fbprot-gpio4;
+ su2-auto-curr1;
+ su2-auto-curr2;
+ su2-auto-curr3;
+ };
+ };
+ };
+++ /dev/null
-AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
-supplies, a battery charger and an RTC. So far only bindings for the two stepup
-DCDC converters are defined. Other DCDC and LDO supplies are configured, using
-standard regulator properties, they must belong to a sub-node, called
-"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
-configuration should be placed in a subnode, called "backlight."
-
-Compulsory properties:
-- compatible : must be "ams,as3711"
-- reg : specifies the I2C address
-
-To use the SU1 converter as a backlight source the following two properties must
-be provided:
-- su1-dev : framebuffer phandle
-- su1-max-uA : maximum current
-
-To use the SU2 converter as a backlight source the following two properties must
-be provided:
-- su2-dev : framebuffer phandle
-- su1-max-uA : maximum current
-
-Additionally one of these properties must be provided to select the type of
-feedback used:
-- su2-feedback-voltage : voltage feedback is used
-- su2-feedback-curr1 : CURR1 input used for current feedback
-- su2-feedback-curr2 : CURR2 input used for current feedback
-- su2-feedback-curr3 : CURR3 input used for current feedback
-- su2-feedback-curr-auto: automatic current feedback selection
-
-and one of these to select the over-voltage protection pin
-- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection
-- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection
-- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection
-- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection
-
-If "su2-feedback-curr-auto" is selected, one or more of the following properties
-have to be specified:
-- su2-auto-curr1 : use CURR1 input for current feedback
-- su2-auto-curr2 : use CURR2 input for current feedback
-- su2-auto-curr3 : use CURR3 input for current feedback
-
-Example:
-
-as3711@40 {
- compatible = "ams,as3711";
- reg = <0x40>;
-
- regulators {
- sd4 {
- regulator-name = "1.215V";
- regulator-min-microvolt = <1215000>;
- regulator-max-microvolt = <1235000>;
- };
- ldo2 {
- regulator-name = "2.8V CPU";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-
- backlight {
- compatible = "ams,as3711-bl";
- su2-dev = <&lcdc>;
- su2-max-uA = <36000>;
- su2-feedback-curr-auto;
- su2-fbprot-gpio4;
- su2-auto-curr1;
- su2-auto-curr2;
- su2-auto-curr3;
- };
-};
node.
The SPMI controller part is provided by
- Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+ Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
properties:
$nodename:
additionalProperties: false
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
patternProperties:
'^ldo[0-9]+$':
type: object
examples:
- |
+ #include <dt-bindings/spmi/spmi.h>
- pmic: pmic@0 {
- compatible = "hisilicon,hi6421v600-spmi";
- reg = <0 0>;
-
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gpio28>;
- interrupts = <0 0>;
-
- regulators {
- #address-cells = <1>;
+ spmi {
+ #address-cells = <2>;
#size-cells = <0>;
- ldo3: ldo3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2000000>;
- regulator-boot-on;
- };
-
- ldo4: ldo4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <1900000>;
- regulator-boot-on;
- };
-
- ldo9: ldo9 {
- regulator-name = "ldo9";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo15: ldo15 {
- regulator-name = "ldo15";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo16: ldo16 {
- regulator-name = "ldo16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldo17: ldo17 {
- regulator-name = "ldo17";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo33: ldo33 {
- regulator-name = "ldo33";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo34: ldo34 {
- regulator-name = "ldo34";
- regulator-min-microvolt = <2600000>;
- regulator-max-microvolt = <3300000>;
+ pmic@0 {
+ compatible = "hisilicon,hi6421v600-spmi";
+ reg = <0 SPMI_USID>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio28>;
+ interrupts = <0 0>;
+
+ regulators {
+ ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
- };
};
- |
#include <dt-bindings/mfd/qcom-pm8008.h>
#include <dt-bindings/interrupt-controller/irq.h>
- qupv3_se13_i2c {
+
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- pm8008i@8 {
+
+ pmic@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
#address-cells = <1>;
- qcom,pm8841
- qcom,pm8909
- qcom,pm8916
+ - qcom,pm8937
- qcom,pm8941
- qcom,pm8950
- qcom,pm8953
type: object
$ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+ "^battery@[0-9a-f]+$":
+ type: object
+ oneOf:
+ - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml#
+
"^charger@[0-9a-f]+$":
type: object
oneOf:
+ - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml#
- $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
- $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
- $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
- qcom,sdx65-tcsr
- qcom,sm4450-tcsr
- qcom,sm8150-tcsr
+ - qcom,sm8250-tcsr
+ - qcom,sm8350-tcsr
- qcom,sm8450-tcsr
- qcom,tcsr-apq8064
- qcom,tcsr-apq8084
};
i2s@11440000 {
- compatible = "samsung,exynos7-i2s";
+ compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
reg = <0x11440000 0x100>;
dmas = <&adma 0>, <&adma 2>;
dma-names = "tx", "rx";
properties:
compatible:
items:
- - const: sprd,ums512-glbregs
+ - enum:
+ - sprd,ums512-glbregs
+ - sprd,ums9620-glbregs
- const: syscon
- const: simple-mfd
- interrupts
- clocks
- clock-names
- - dmas
- - dma-names
additionalProperties: false
properties:
compatible:
- const: "fsl,dpaa2-console"
+ const: fsl,dpaa2-console
reg:
maxItems: 1
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0xff160000 0x1000>;
- clocks = <&clk200>, <&clk200>;
- clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clk200>, <&clk200>, <&clk1200>;
+ clock-names = "clk_xin", "clk_ahb", "gate";
clock-output-names = "clk_out_sd0", "clk_in_sd0";
#clock-cells = <1>;
clk-phase-sd-hs = <63>, <72>;
interrupt-parent = <&gic>;
interrupts = <0 126 4>;
reg = <0xf1040000 0x10000>;
- clocks = <&clk200>, <&clk200>;
- clock-names = "clk_xin", "clk_ahb";
+ clocks = <&clk200>, <&clk200>, <&clk1200>;
+ clock-names = "clk_xin", "clk_ahb", "gate";
clock-output-names = "clk_out_sd0", "clk_in_sd0";
#clock-cells = <1>;
clk-phase-sd-hs = <132>, <60>;
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- cd-gpios = <&gpio2 31 0x4>;
+ cd-gpios = <&gpio2 31 0x4>;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
- const: brcm,sdhci-brcmstb
- items:
- enum:
+ - brcm,bcm74165b0-sdhci
- brcm,bcm7445-sdhci
- - const: brcm,sdhci-brcmstb
- - items:
- - enum:
- brcm,bcm7425-sdhci
- const: brcm,sdhci-brcmstb
- marvell,armada-ap806-sdhci
- items:
- - const: marvell,armada-ap807-sdhci
+ - enum:
+ - marvell,armada-ap807-sdhci
+ - marvell,ac5-sdhci
- const: marvell,armada-ap806-sdhci
- items:
minimum: 0
maximum: 7
+ mediatek,tuning-step:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Some SoCs need extend tuning step for better delay value to avoid CRC issue.
+ If not present, default tuning step is 32. For eMMC and SD, this can yield
+ satisfactory calibration results in most cases.
+ enum: [32, 64]
+ default: 32
+
resets:
maxItems: 1
- renesas,sdhi-r8a77980 # R-Car V3H
- renesas,sdhi-r8a77990 # R-Car E3
- renesas,sdhi-r8a77995 # R-Car D3
- - renesas,sdhi-r9a07g043 # RZ/G2UL
+ - renesas,sdhi-r9a07g043 # RZ/G2UL and RZ/Five
- renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
- renesas,sdhi-r9a07g054 # RZ/V2L
- renesas,sdhi-r9a08g045 # RZ/G3S
properties:
compatible:
- enum:
- - samsung,exynos4210-dw-mshc
- - samsung,exynos4412-dw-mshc
- - samsung,exynos5250-dw-mshc
- - samsung,exynos5420-dw-mshc
- - samsung,exynos5420-dw-mshc-smu
- - samsung,exynos7-dw-mshc
- - samsung,exynos7-dw-mshc-smu
- - axis,artpec8-dw-mshc
+ oneOf:
+ - enum:
+ - axis,artpec8-dw-mshc
+ - samsung,exynos4210-dw-mshc
+ - samsung,exynos4412-dw-mshc
+ - samsung,exynos5250-dw-mshc
+ - samsung,exynos5420-dw-mshc
+ - samsung,exynos5420-dw-mshc-smu
+ - samsung,exynos7-dw-mshc
+ - samsung,exynos7-dw-mshc-smu
+ - items:
+ - enum:
+ - samsung,exynos5433-dw-mshc-smu
+ - samsung,exynos7885-dw-mshc-smu
+ - samsung,exynos850-dw-mshc-smu
+ - const: samsung,exynos7-dw-mshc-smu
reg:
maxItems: 1
- items:
- enum:
- qcom,apq8084-sdhci
+ - qcom,ipq4019-sdhci
+ - qcom,ipq8074-sdhci
- qcom,msm8226-sdhci
- qcom,msm8953-sdhci
- qcom,msm8974-sdhci
const: marvell,armada-380-sdhci
then:
properties:
- regs:
+ reg:
minItems: 3
reg-names:
minItems: 3
- reg-names
else:
properties:
- regs:
+ reg:
maxItems: 1
reg-names:
maxItems: 1
- rockchip,rk3568-dwcmshc
- rockchip,rk3588-dwcmshc
- snps,dwcmshc-sdhci
+ - thead,th1520-dwcmshc
reg:
maxItems: 1
- const: biu
- const: ciu
+ iommus:
+ maxItems: 1
+
altr,sysmgr-syscon:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
altr,sysmgr-syscon: true
else:
properties:
+ iommus: false
altr,sysmgr-syscon: false
required:
title: U-Boot bootloader partition
description: |
- U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+ U-Boot is a bootloader commonly used in embedded devices. It's almost always
located on some kind of flash device.
Device configuration is stored as a set of environment variables that are
$ref: dsa-port.yaml#
unevaluatedProperties: false
+oneOf:
+ - required:
+ - ports
+ - required:
+ - ethernet-ports
+
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6060 DSA switch
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+
+description:
+ The Marvell MV88E6060 switch has been produced and sold by Marvell
+ since at least 2008. The switch has one pin ADDR4 that controls the
+ MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
+ connected to the switch, the PHYs inside the switch appear as
+ independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
+ from many other DSA switches this switch does not have an internal
+ MDIO bus for the PHY devices.
+
+properties:
+ compatible:
+ const: marvell,mv88e6060
+ description:
+ The MV88E6060 is the oldest Marvell DSA switch product, and
+ as such a bit limited in features compared to later hardware.
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO to be used to reset the whole device
+ maxItems: 1
+
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-switch@16 {
+ compatible = "marvell,mv88e6060";
+ reg = <16>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ ethernet-port@5 {
+ reg = <5>;
+ phy-mode = "rev-mii";
+ ethernet = <ðc>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6xxx DSA switch family
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+
+description:
+ The Marvell MV88E6xxx switch series has been produced and sold
+ by Marvell since at least 2008. The switch has a few compatibles which
+ just indicate the base address of the switch, then operating systems
+ can investigate switch ID registers to find out which actual version
+ of the switch it is dealing with.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - marvell,mv88e6085
+ - marvell,mv88e6190
+ - marvell,mv88e6250
+ description: |
+ marvell,mv88e6085: This switch uses base address 0x10.
+ This switch and its siblings will be autodetected from
+ ID registers found in the switch, so only "marvell,mv88e6085" should be
+ specified. This includes the following list of MV88Exxxx switches:
+ 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176,
+ 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352
+ marvell,mv88e6190: This switch uses base address 0x00.
+ This switch and its siblings will be autodetected from
+ ID registers found in the switch, so only "marvell,mv88e6190" should be
+ specified. This includes the following list of MV88Exxxx switches:
+ 6190, 6190X, 6191, 6290, 6361, 6390, 6390X
+ marvell,mv88e6250: This switch uses base address 0x08 or 0x18.
+ This switch and its siblings will be autodetected from
+ ID registers found in the switch, so only "marvell,mv88e6250" should be
+ specified. This includes the following list of MV88Exxxx switches:
+ 6220, 6250
+ - items:
+ - const: marvell,turris-mox-mv88e6085
+ - const: marvell,mv88e6085
+ - items:
+ - const: marvell,turris-mox-mv88e6190
+ - const: marvell,mv88e6190
+
+ reg:
+ maxItems: 1
+
+ eeprom-length:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Set to the length of an EEPROM connected to the switch. Must be
+ set if the switch can not detect the presence and/or size of a connected
+ EEPROM, otherwise optional.
+
+ reset-gpios:
+ description:
+ GPIO to be used to reset the whole device
+ maxItems: 1
+
+ interrupts:
+ description: The switch provides an external interrupt line, but it is
+ not always used by target systems.
+ maxItems: 1
+
+ interrupt-controller:
+ description: The switch has an internal interrupt controller used by
+ the different sub-blocks.
+
+ '#interrupt-cells':
+ description: The internal interrupt controller only supports triggering
+ on active high level interrupts so the second cell must alway be set to
+ IRQ_TYPE_LEVEL_HIGH.
+ const: 2
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ description: Marvell MV88E6xxx switches have an varying combination of
+ internal and external MDIO buses, in some cases a combined bus that
+ can be used both internally and externally. This node is for the
+ primary bus, used internally and sometimes also externally.
+
+ mdio-external:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ description: Marvell MV88E6xxx switches that have a separate external
+ MDIO bus use this port to access external components on the MDIO bus.
+
+ properties:
+ compatible:
+ const: marvell,mv88e6xxx-mdio-external
+
+ required:
+ - compatible
+
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-switch@0 {
+ compatible = "marvell,mv88e6085";
+ reg = <0>;
+ reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sw_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ sw_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ sw_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sw_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan4";
+ phy-handle = <&sw_phy0>;
+ phy-mode = "internal";
+ };
+
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&sw_phy1>;
+ phy-mode = "internal";
+ };
+
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&sw_phy2>;
+ phy-mode = "internal";
+ };
+
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&sw_phy3>;
+ phy-mode = "internal";
+ };
+
+ ethernet-port@5 {
+ reg = <5>;
+ ethernet = <&fec>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-switch@0 {
+ compatible = "marvell,mv88e6190";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&switch_interrupt_pins>;
+ pinctrl-names = "default";
+ reg = <0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ switch0phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ switch0phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ switch0phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ switch0phy6: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ switch0phy7: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ switch0phy8: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ };
+
+ mdio-external {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@b {
+ reg = <0xb>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ phy2: ethernet-phy@c {
+ reg = <0xc>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ ethernet = <ð0>;
+ phy-mode = "rgmii";
+ reg = <0>;
+
+ fixed-link {
+ full-duplex;
+ pause;
+ speed = <1000>;
+ };
+ };
+
+ ethernet-port@1 {
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ reg = <1>;
+ };
+
+ ethernet-port@2 {
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ reg = <2>;
+ };
+
+ ethernet-port@3 {
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ reg = <3>;
+ };
+
+ ethernet-port@4 {
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ reg = <4>;
+ };
+
+ ethernet-port@5 {
+ label = "lan5";
+ phy-handle = <&switch0phy5>;
+ reg = <5>;
+ };
+
+ ethernet-port@6 {
+ label = "lan6";
+ phy-handle = <&switch0phy6>;
+ reg = <6>;
+ };
+
+ ethernet-port@7 {
+ label = "lan7";
+ phy-handle = <&switch0phy7>;
+ reg = <7>;
+ };
+
+ ethernet-port@8 {
+ label = "lan8";
+ phy-handle = <&switch0phy8>;
+ reg = <8>;
+ };
+
+ ethernet-port@9 {
+ /* 88X3310P external phy */
+ label = "lan9";
+ phy-handle = <&phy1>;
+ phy-mode = "xaui";
+ reg = <9>;
+ };
+
+ ethernet-port@a {
+ /* 88X3310P external phy */
+ label = "lan10";
+ phy-handle = <&phy2>;
+ phy-mode = "xaui";
+ reg = <0xa>;
+ };
+ };
+ };
+ };
+++ /dev/null
-Marvell DSA Switch Device Tree Bindings
----------------------------------------
-
-WARNING: This binding is currently unstable. Do not program it into a
-FLASH never to be changed again. Once this binding is stable, this
-warning will be removed.
-
-If you need a stable binding, use the old dsa.txt binding.
-
-Marvell Switches are MDIO devices. The following properties should be
-placed as a child node of an mdio device.
-
-The properties described here are those specific to Marvell devices.
-Additional required and optional properties can be found in dsa.txt.
-
-The compatibility string is used only to find an identification register,
-which is at a different MDIO base address in different switch families.
-- "marvell,mv88e6085" : Switch has base address 0x10. Use with models:
- 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
- 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
- 6341, 6350, 6351, 6352
-- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
- 6190, 6190X, 6191, 6290, 6361, 6390, 6390X
-- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
- 6220, 6250
-
-Required properties:
-- compatible : Should be one of "marvell,mv88e6085",
- "marvell,mv88e6190" or "marvell,mv88e6250" as
- indicated above
-- reg : Address on the MII bus for the switch.
-
-Optional properties:
-
-- reset-gpios : Should be a gpio specifier for a reset line
-- interrupts : Interrupt from the switch
-- interrupt-controller : Indicates the switch is itself an interrupt
- controller. This is used for the PHY interrupts.
-#interrupt-cells = <2> : Controller uses two cells, number and flag
-- eeprom-length : Set to the length of an EEPROM connected to the
- switch. Must be set if the switch can not detect
- the presence and/or size of a connected EEPROM,
- otherwise optional.
-- mdio : Container of PHY and devices on the switches MDIO
- bus.
-- mdio? : Container of PHYs and devices on the external MDIO
- bus. The node must contains a compatible string of
- "marvell,mv88e6xxx-mdio-external"
-
-Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- switch0: switch@0 {
- compatible = "marvell,mv88e6085";
- reg = <0>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- switch0: switch@0 {
- compatible = "marvell,mv88e6190";
- reg = <0>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- mdio1 {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy9: switch1phy0@9 {
- reg = <9>;
- };
- };
- };
- };
- Woojung Huh <Woojung.Huh@microchip.com>
allOf:
- - $ref: dsa.yaml#/$defs/ethernet-ports
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
- compatible
- reg
+if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - microchip,ksz8863
+ - microchip,ksz8873
+then:
+ $ref: dsa.yaml#/$defs/ethernet-ports
+else:
+ patternProperties:
+ "^(ethernet-)?ports$":
+ patternProperties:
+ "^(ethernet-)?port@[0-2]$":
+ $ref: dsa-port.yaml#
+ unevaluatedProperties: false
+ properties:
+ microchip,rmii-clk-internal:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When ksz88x3 is acting as clock provier (via REFCLKO) it
+ can select between internal and external RMII reference
+ clock. Internal reference clock means that the clock for
+ the RMII of ksz88x3 is provided by the ksz88x3 internally
+ and the REFCLKI pin is unconnected. For the external
+ reference clock, the clock needs to be fed back to ksz88x3
+ via REFCLKI.
+ If microchip,rmii-clk-internal is set, ksz88x3 will provide
+ rmii reference clock internally, otherwise reference clock
+ should be provided externally.
+ dependencies:
+ microchip,rmii-clk-internal: [ethernet]
+
unevaluatedProperties: false
examples:
select: false
-properties:
- $nodename:
- pattern: "^(ethernet-)?switch(@.*)?$"
+allOf:
+ # This condition is here to satisfy the case where certain device
+ # nodes have to preserve non-standard names because of
+ # backward-compatibility with boot loaders inspecting certain
+ # node names.
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,turris-mox-mv88e6085
+ - marvell,turris-mox-mv88e6190
+ then:
+ properties:
+ $nodename:
+ pattern: "switch[0-3]@[0-3]+$"
+ else:
+ properties:
+ $nodename:
+ pattern: "^(ethernet-)?switch(@.*)?$"
patternProperties:
"^(ethernet-)?ports$":
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+ line interface component designed to fulfill all required interfacing between
+ an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+ compatible:
+ items:
+ - const: lantiq,pef2256
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Master Clock
+ - description: System Clock Receive
+ - description: System Clock Transmit
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: sclkr
+ - const: sclkx
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO used to reset the device.
+ maxItems: 1
+
+ pinctrl:
+ $ref: /schemas/pinctrl/pinctrl.yaml#
+ additionalProperties: false
+
+ patternProperties:
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ pins:
+ enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+ function:
+ enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+ SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+ GPI, GPOH, GPOL ]
+
+ required:
+ - pins
+ - function
+
+ lantiq,data-rate-bps:
+ enum: [2048000, 4096000, 8192000, 16384000]
+ default: 2048000
+ description:
+ Data rate (bit per seconds) on the system highway.
+
+ lantiq,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data is sent on falling edge of the clock (and received on the rising
+ edge). If 'clock-falling-edge' is not present, data is sent on the
+ rising edge (and received on the falling edge).
+
+ lantiq,channel-phase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description: |
+ The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit
+ time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data
+ rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+ bit/s, the data (all 32 8-bit) present in the frame are interleave with
+ unused time-slots. The lantiq,channel-phase property allows to set the
+ correct alignment of the interleave mechanism.
+ For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+ lantiq,channel-phase = 2, the interleave schema with unused time-slots
+ (nu) and used time-slots (XX) for TSi is
+ nu nu XX nu nu nu XX nu nu nu XX nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+ interleave schema is
+ nu XX nu nu nu XX nu nu nu XX nu nu
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+ With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+ lantiq,channel-phase = 1, the interleave schema is
+ nu XX nu XX nu XX
+ <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+patternProperties:
+ '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$':
+ type: object
+ $ref: /schemas/sound/dai-common.yaml
+ unevaluatedProperties: false
+ description:
+ Codec provided by the pef2256. This codec allows to use some of the PCM
+ system highway time-slots as audio channels to transport audio data over
+ the E1/T1/J1 lines.
+ The time-slots used by the codec must be set and so, the properties
+ 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+ 'dai-tdm-slot-rx-mask' must be present in the sound card node for
+ sub-nodes that involve the codec. The codec uses 8-bit time-slots.
+ 'dai-tdm-tdm-slot-with' must be set to 8.
+ The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+ properties:
+ compatible:
+ const: lantiq,pef2256-codec
+
+ '#sound-dai-cells':
+ const: 0
+
+ required:
+ - compatible
+ - '#sound-dai-cells'
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pef2256: framer@2000000 {
+ compatible = "lantiq,pef2256";
+ reg = <0x2000000 0x100>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&intc>;
+ clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+ clock-names = "mclk", "sclkr", "sclkx";
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ lantiq,data-rate-bps = <4096000>;
+
+ pinctrl {
+ pef2256_rpa_sypr: rpa-pins {
+ pins = "RPA";
+ function = "SYPR";
+ };
+ pef2256_xpa_sypx: xpa-pins {
+ pins = "XPA";
+ function = "SYPX";
+ };
+ };
+
+ pef2256_codec0: codec-0 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_0";
+ };
+
+ pef2256_codec1: codec-1 {
+ compatible = "lantiq,pef2256-codec";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PEF2256_1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+ reg = <0>;
+ cpu {
+ sound-dai = <&cpu_dai1>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec0>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 1, 2, 3, 4 */
+ dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+ reg = <1>;
+ cpu {
+ sound-dai = <&cpu_dai2>;
+ };
+ codec {
+ sound-dai = <&pef2256_codec1>;
+ dai-tdm-slot-num = <4>;
+ dai-tdm-slot-width = <8>;
+ /* TS 5, 6, 7, 8 */
+ dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+ dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Aquantia Ethernet PHY
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+ Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually
+ work.
+
+ This can be done and is implemented by OEM in 3 different way:
+ - Attached SPI flash directly to the PHY with the firmware. The PHY
+ will self load the firmware in the presence of this configuration.
+ - Read from a dedicated partition on system NAND declared in an
+ NVMEM cell, and loaded to the PHY using its mailbox interface.
+ - Manually provided firmware loaded from a file in the filesystem.
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ethernet-phy-id03a1.b445
+ - ethernet-phy-id03a1.b460
+ - ethernet-phy-id03a1.b4a2
+ - ethernet-phy-id03a1.b4d0
+ - ethernet-phy-id03a1.b4e0
+ - ethernet-phy-id03a1.b5c2
+ - ethernet-phy-id03a1.b4b0
+ - ethernet-phy-id03a1.b662
+ - ethernet-phy-id03a1.b712
+ - ethernet-phy-id31c3.1c12
+ required:
+ - compatible
+
+properties:
+ reg:
+ maxItems: 1
+
+ firmware-name:
+ description: specify the name of PHY firmware to load
+
+ nvmem-cells:
+ description: phandle to the firmware nvmem cell
+ maxItems: 1
+
+ nvmem-cell-names:
+ const: firmware
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-id31c3.1c12",
+ "ethernet-phy-ieee802.3-c45";
+
+ reg = <0>;
+ firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
+ };
+
+ ethernet-phy@1 {
+ compatible = "ethernet-phy-id31c3.1c12",
+ "ethernet-phy-ieee802.3-c45";
+
+ reg = <1>;
+ nvmem-cells = <&aqr_fw>;
+ nvmem-cell-names = "firmware";
+ };
+ };
+
+ flash {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* ... */
+
+ partition@650000 {
+ compatible = "nvmem-cells";
+ label = "0:ethphyfw";
+ reg = <0x650000 0x80000>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aqr_fw: aqr_fw@0 {
+ reg = <0x0 0x5f42a>;
+ };
+ };
+
+ /* ... */
+
+ };
+ };
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0x0>;
- ports {
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
/* Port definitions */
};
allOf:
- $ref: mdio.yaml#
- - if:
- required:
- - interrupts
-
- then:
- properties:
- reg:
- items:
- - items:
- - $ref: /schemas/types.yaml#/definitions/cell
- - const: 0x84
-
- else:
- properties:
- reg:
- items:
- - items:
- - $ref: /schemas/types.yaml#/definitions/cell
- - enum:
- - 0x4
- - 0x10
-
unevaluatedProperties: false
examples:
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
- reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>;
+ reg = <0x0 0x1000>;
device_type = "pci";
switch@0,0 {
properties:
compatible:
- items:
- - enum:
- - mediatek,mt7622-sgmiisys
- - mediatek,mt7629-sgmiisys
- - mediatek,mt7981-sgmiisys_0
- - mediatek,mt7981-sgmiisys_1
- - mediatek,mt7986-sgmiisys_0
- - mediatek,mt7986-sgmiisys_1
- - const: syscon
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt7622-sgmiisys
+ - mediatek,mt7629-sgmiisys
+ - mediatek,mt7981-sgmiisys_0
+ - mediatek,mt7981-sgmiisys_1
+ - mediatek,mt7986-sgmiisys_0
+ - mediatek,mt7986-sgmiisys_1
+ - const: syscon
+ - items:
+ - enum:
+ - mediatek,mt7988-sgmiisys0
+ - mediatek,mt7988-sgmiisys1
+ - const: simple-mfd
+ - const: syscon
reg:
maxItems: 1
description: Invert polarity of the SGMII data lanes
type: boolean
+ pcs:
+ type: object
+ description: MediaTek LynxI HSGMII PCS
+ properties:
+ compatible:
+ const: mediatek,mt7988-sgmii
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: sgmii_sel
+ - const: sgmii_tx
+ - const: sgmii_rx
+
+ required:
+ - compatible
+ - clocks
+ - clock-names
+
+ additionalProperties: false
+
required:
- compatible
- reg
- '#clock-cells'
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt7988-sgmiisys0
+ - mediatek,mt7988-sgmiisys1
+
+ then:
+ required:
+ - pcs
+
+ else:
+ properties:
+ pcs: false
+
additionalProperties: false
examples:
properties:
compatible:
- enum:
- - qcom,msm8998-ipa
- - qcom,sc7180-ipa
- - qcom,sc7280-ipa
- - qcom,sdm845-ipa
- - qcom,sdx55-ipa
- - qcom,sdx65-ipa
- - qcom,sm6350-ipa
- - qcom,sm8350-ipa
+ oneOf:
+ - enum:
+ - qcom,msm8998-ipa
+ - qcom,sc7180-ipa
+ - qcom,sc7280-ipa
+ - qcom,sdm845-ipa
+ - qcom,sdx55-ipa
+ - qcom,sdx65-ipa
+ - qcom,sm6350-ipa
+ - qcom,sm8350-ipa
+ - qcom,sm8550-ipa
+ - items:
+ - enum:
+ - qcom,sm8650-ipa
+ - const: qcom,sm8550-ipa
reg:
items:
- items:
- enum:
- - renesas,r9a07g043-gbeth # RZ/G2UL
+ - renesas,r9a07g043-gbeth # RZ/G2UL and RZ/Five
- renesas,r9a07g044-gbeth # RZ/G2{L,LC}
- renesas,r9a07g054-gbeth # RZ/V2L
+ - renesas,r9a08g045-gbeth # RZ/G3S
- const: renesas,rzg2l-gbeth # RZ/{G2L,G2UL,V2L} family
reg: true
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ethertsn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet TSN End-station
+
+maintainers:
+ - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+ The RTSN device provides Ethernet network using a 10 Mbps, 100 Mbps, or 1
+ Gbps full-duplex link via MII/GMII/RMII/RGMII. Depending on the connected PHY.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a779g0-ethertsn # R-Car V4H
+ - const: renesas,rcar-gen4-ethertsn
+
+ reg:
+ items:
+ - description: TSN End Station target
+ - description: generalized Precision Time Protocol target
+
+ reg-names:
+ items:
+ - const: tsnes
+ - const: gptp
+
+ interrupts:
+ items:
+ - description: TX data interrupt
+ - description: RX data interrupt
+
+ interrupt-names:
+ items:
+ - const: tx
+ - const: rx
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ phy-mode:
+ contains:
+ enum:
+ - mii
+ - rgmii
+
+ phy-handle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Specifies a reference to a node representing a PHY device.
+
+ rx-internal-delay-ps:
+ enum: [0, 1800]
+ default: 0
+
+ tx-internal-delay-ps:
+ enum: [0, 2000]
+ default: 0
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^ethernet-phy@[0-9a-f]$":
+ type: object
+ $ref: ethernet-phy.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - clocks
+ - power-domains
+ - resets
+ - phy-mode
+ - phy-handle
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a779g0-sysc.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ tsn0: ethernet@e6460000 {
+ compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn";
+ reg = <0xe6460000 0x7000>,
+ <0xe6449000 0x500>;
+ reg-names = "tsnes", "gptp";
+ interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ clocks = <&cpg CPG_MOD 2723>;
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 2723>;
+
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+ phy-handle = <&phy3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ };
+ };
pinctrl-names = "default";
pinctrl-0 = <&cps_sfpp0_pins>;
tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
};
mdio {
and "phy-handle" should point to an external PHY if exists.
maxItems: 1
+ dmas:
+ minItems: 2
+ maxItems: 32
+ description: TX and RX DMA channel phandle
+
+ dma-names:
+ items:
+ pattern: "^[tr]x_chan([0-9]|1[0-5])$"
+ description:
+ Should be "tx_chan0", "tx_chan1" ... "tx_chan15" for DMA Tx channel
+ Should be "rx_chan0", "rx_chan1" ... "rx_chan15" for DMA Rx channel
+ minItems: 2
+ maxItems: 32
+
required:
- compatible
- interrupts
clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
phy-mode = "mii";
reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+ dmas = <&xilinx_dma 0>, <&xilinx_dma 1>;
+ dma-names = "tx_chan0", "rx_chan0";
xlnx,rxcsum = <0x2>;
xlnx,rxmem = <0x800>;
xlnx,txcsum = <0x2>;
- st,stm32f4-otp
- st,stm32mp13-bsec
- st,stm32mp15-bsec
+ - st,stm32mp25-bsec
reg:
maxItems: 1
aspm-no-l0s: true
+ brcm,clkreq-mode:
+ description: A string that determines the operating
+ clkreq mode of the PCIe RC HW with respect to controlling the refclk
+ signal. There are three different modes -- "safe", which drives the
+ refclk signal unconditionally and will work for all devices but does
+ not provide any power savings; "no-l1ss" -- which provides Clock
+ Power Management, L0s, and L1, but cannot provide L1 substate (L1SS)
+ power savings. If the downstream device connected to the RC is L1SS
+ capable AND the OS enables L1SS, all PCIe traffic may abruptly halt,
+ potentially hanging the system; "default" -- which provides L0s, L1,
+ and L1SS, but not compliant to provide Clock Power Management;
+ specifically, may not be able to meet the T_CLRon max timing of 400ns
+ as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI
+ Express Mini CEM 2.1 specification. This situation is atypical and
+ should happen only with older devices.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ safe, no-l1ss, default ]
+
brcm,scb-sizes:
description: u64 giving the 64bit PCIe memory
viewport size of a memory controller. There may be up to
- qcom,pcie-sm8450-pcie0
- qcom,pcie-sm8450-pcie1
- qcom,pcie-sm8550
+ - items:
+ - enum:
+ - qcom,pcie-sm8650
+ - const: qcom,pcie-sm8550
- items:
- const: qcom,pcie-msm8998
- const: qcom,pcie-msm8996
maxItems: 8
iommu-map:
- maxItems: 2
+ minItems: 1
+ maxItems: 16
# Common definitions for clocks, clock-names and reset.
# Platform constraints are described later.
minItems: 1
maxItems: 12
- resets-names:
+ reset-names:
minItems: 1
maxItems: 12
items:
- const: pci # PCIe core reset
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc8180x
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ maxItems: 8
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+ - const: tbu # PCIe TBU clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
- if:
properties:
compatible:
compatible:
contains:
enum:
- - qcom,pcie-sc8180x
- qcom,pcie-sm8150
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ maxItems: 8
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ref # REFERENCE clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,pcie-sm8250
then:
oneOf:
phy-names:
const: pcie
+ vpcie1v5-supply:
+ description: The 1.5v regulator to use for PCIe.
+
+ vpcie3v3-supply:
+ description: The 3.3v regulator to use for PCIe.
+
+ vpcie12v-supply:
+ description: The 12v regulator to use for PCIe.
+
required:
- compatible
- reg
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 319>;
+ vpcie3v3-supply = <&pcie_3v3>;
+ vpcie12v-supply = <&pcie_12v>;
};
};
- description: APB clock for PCIe
- description: Auxiliary clock for PCIe
- description: PIPE clock
+ - description: Reference clock for PCIe
clock-names:
minItems: 5
- const: pclk
- const: aux
- const: pipe
+ - const: ref
interrupts:
items:
maintainers:
- Kishon Vijay Abraham I <kishon@ti.com>
-allOf:
- - $ref: cdns-pcie-ep.yaml#
-
properties:
compatible:
oneOf:
- const: ti,j721e-pcie-ep
+ - const: ti,j784s4-pcie-ep
- description: PCIe EP controller in AM64
items:
- const: ti,am64-pcie-ep
items:
- const: link_state
+allOf:
+ - $ref: cdns-pcie-ep.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am64-pcie-ep
+ then:
+ properties:
+ num-lanes:
+ const: 1
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,j7200-pcie-ep
+ - ti,j721e-pcie-ep
+ then:
+ properties:
+ num-lanes:
+ minimum: 1
+ maximum: 2
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,j784s4-pcie-ep
+ then:
+ properties:
+ num-lanes:
+ minimum: 1
+ maximum: 4
+
required:
- compatible
- reg
maintainers:
- Kishon Vijay Abraham I <kishon@ti.com>
-allOf:
- - $ref: cdns-pcie-host.yaml#
-
properties:
compatible:
oneOf:
- const: ti,j721e-pcie-host
+ - const: ti,j784s4-pcie-host
- description: PCIe controller in AM64
items:
- const: ti,am64-pcie-host
interrupts:
maxItems: 1
+allOf:
+ - $ref: cdns-pcie-host.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,am64-pcie-host
+ then:
+ properties:
+ num-lanes:
+ const: 1
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,j7200-pcie-host
+ - ti,j721e-pcie-host
+ then:
+ properties:
+ num-lanes:
+ minimum: 1
+ maximum: 2
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - ti,j784s4-pcie-host
+ then:
+ properties:
+ num-lanes:
+ minimum: 1
+ maximum: 4
+
required:
- compatible
- reg
<0x0 0x28050000 0x0 0x00010000>,
<0x0 0x24200000 0x0 0x00002000>,
<0x0 0x24162000 0x0 0x00001000>;
- reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+ reg-names = "dbi", "config", "ulreg", "smu", "mpu";
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <2>;
- fsl,imx8mq-ddr-pmu
- fsl,imx8mp-ddr-pmu
- const: fsl,imx8m-ddr-pmu
+ - items:
+ - const: fsl,imx8dxl-ddr-pmu
+ - const: fsl,imx8-ddr-pmu
reg:
maxItems: 1
"#phy-cells":
const: 0
- reg:
- maxItems: 1
-
required:
- compatible
- - reg
- "#phy-cells"
additionalProperties: false
-
-examples:
- - |
- phy@0 {
- compatible = "amlogic,g12a-mipi-dphy-analog";
- reg = <0x0 0xc>;
- #phy-cells = <0>;
- };
maintainers:
- Remi Pommarel <repk@triplefau.lt>
-description: |+
- The Everything-Else Power Domains node should be the child of a syscon
- node with the required property:
-
- - compatible: Should be the following:
- "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
-
- Refer to the bindings described in
- Documentation/devicetree/bindings/mfd/syscon.yaml
-
properties:
compatible:
const: amlogic,axg-mipi-pcie-analog-phy
- "#phy-cells"
additionalProperties: false
-
-examples:
- - |
- mpphy: phy {
- compatible = "amlogic,axg-mipi-pcie-analog-phy";
- #phy-cells = <0>;
- };
- items:
- enum:
- mediatek,mt8188-mipi-tx
+ - mediatek,mt8195-mipi-tx
- mediatek,mt8365-mipi-tx
- const: mediatek,mt8183-mipi-tx
- const: mediatek,mt2701-mipi-tx
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,force-mode:
+ description:
+ The force mode is used to manually switch the shared phy mode between
+ USB3 and PCIe, when USB3 phy type is selected by the consumer, and
+ force-mode is set, will cause phy's power and pipe toggled and force
+ phy as USB3 mode which switched from default PCIe mode. But perfer to
+ use the property "mediatek,syscon-type" for newer SoCs that support it.
+ type: boolean
+
mediatek,syscon-type:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
- qcom,sm8450-qmp-gen4x2-pcie-phy
- qcom,sm8550-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen4x2-pcie-phy
+ - qcom,sm8650-qmp-gen3x2-pcie-phy
+ - qcom,sm8650-qmp-gen4x2-pcie-phy
reg:
minItems: 1
- qcom,sm8450-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen3x2-pcie-phy
- qcom,sm8550-qmp-gen4x2-pcie-phy
+ - qcom,sm8650-qmp-gen3x2-pcie-phy
+ - qcom,sm8650-qmp-gen4x2-pcie-phy
then:
properties:
clocks:
contains:
enum:
- qcom,sm8550-qmp-gen4x2-pcie-phy
+ - qcom,sm8650-qmp-gen4x2-pcie-phy
then:
properties:
resets:
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8450-qmp-ufs-phy
- qcom,sm8550-qmp-ufs-phy
+ - qcom,sm8650-qmp-ufs-phy
reg:
maxItems: 1
- qcom,sm8250-qmp-ufs-phy
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8550-qmp-ufs-phy
+ - qcom,sm8650-qmp-ufs-phy
then:
properties:
clocks:
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-usb3-uni-phy
- qcom,sm8350-qmp-usb3-uni-phy
+ - qcom,x1e80100-qmp-usb3-uni-phy
reg:
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-usb3-uni-phy
- qcom,sm8350-qmp-usb3-uni-phy
+ - qcom,x1e80100-qmp-usb3-uni-phy
then:
properties:
clocks:
enum:
- qcom,sa8775p-qmp-usb3-uni-phy
- qcom,sc8280xp-qmp-usb3-uni-phy
+ - qcom,x1e80100-qmp-usb3-uni-phy
then:
required:
- power-domains
- qcom,sm8350-qmp-usb3-dp-phy
- qcom,sm8450-qmp-usb3-dp-phy
- qcom,sm8550-qmp-usb3-dp-phy
+ - qcom,sm8650-qmp-usb3-dp-phy
+ - qcom,x1e80100-qmp-usb3-dp-phy
reg:
maxItems: 1
"#clock-cells":
const: 1
description:
- See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+ See include/dt-bindings/phy/phy-qcom-qmp.h
"#phy-cells":
const: 1
description:
- See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+ See include/dt-bindings/phy/phy-qcom-qmp.h
orientation-switch:
description:
- qcom,sc8280xp-qmp-usb43dp-phy
- qcom,sm6350-qmp-usb3-dp-phy
- qcom,sm8550-qmp-usb3-dp-phy
+ - qcom,sm8650-qmp-usb3-dp-phy
+ - qcom,x1e80100-qmp-usb3-dp-phy
then:
required:
- power-domains
- items:
- enum:
- qcom,sdx75-snps-eusb2-phy
+ - qcom,sm8650-snps-eusb2-phy
+ - qcom,x1e80100-snps-eusb2-phy
- const: qcom,sm8550-snps-eusb2-phy
- const: qcom,sm8550-snps-eusb2-phy
- ti,omap3-padconf
- ti,omap4-padconf
- ti,omap5-padconf
+ - ti,j7200-padconf
- const: pinctrl-single
reg:
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 24
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 27
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 35
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 33
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC LPASS LPI TLMM Common Properties
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Common properties for the Top Level Mode Multiplexer pin controllers in the
+ Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs.
+
+properties:
+ gpio-controller: true
+
+ "#gpio-cells":
+ description:
+ Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+required:
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+additionalProperties: true
+
+$defs:
+ qcom-tlmm-state:
+ properties:
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ additionalProperties: true
+
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- '#interrupt-cells': true
- gpio-controller: true
- '#gpio-cells': true
- gpio-ranges: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
-
gpio-reserved-ranges:
maxItems: 1
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 86
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 61
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
patternProperties:
"-state$":
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 76
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 73
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 73
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 73
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 75
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 75
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
- |
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
- pm8841_mpp: mpps@a000 {
- compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
- reg = <0xa000 0>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8841_mpp 0 0 4>;
- gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
- "BT_LED_CTRL", "GPIO-F";
- interrupt-controller;
- #interrupt-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pm8841_default>;
-
- mpp1-state {
- pins = "mpp1";
- function = "digital";
- input-enable;
- power-source = <PM8841_MPP_S3>;
- };
-
- default-state {
- gpio-pins {
- pins = "mpp1", "mpp2", "mpp3", "mpp4";
- function = "digital";
- input-enable;
- power-source = <PM8841_MPP_S3>;
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8841_mpp: mpps@a000 {
+ compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+ reg = <0xa000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8841_mpp 0 0 4>;
+ gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+ "BT_LED_CTRL", "GPIO-F";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8841_default>;
+
+ mpp1-state {
+ pins = "mpp1";
+ function = "digital";
+ input-enable;
+ power-source = <PM8841_MPP_S3>;
+ };
+
+ default-state {
+ gpio-pins {
+ pins = "mpp1", "mpp2", "mpp3", "mpp4";
+ function = "digital";
+ input-enable;
+ power-source = <PM8841_MPP_S3>;
+ };
+ };
};
- };
};
...
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 60
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg:
maxItems: 1
- interrupts: true
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
+ interrupts:
+ maxItems: 1
gpio-reserved-ranges:
minItems: 1
gpio-line-names:
maxItems: 151
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg:
maxItems: 1
- interrupts: true
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
+ interrupts:
+ maxItems: 1
gpio-reserved-ranges:
minItems: 1
gpio-line-names:
maxItems: 148
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 60
- reg
- reg-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg:
maxItems: 2
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-pull-down: true
- bias-pull-up: true
- bias-bus-hold: true
- bias-disable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
required:
- compatible
- reg
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+allOf:
+ - $ref: qcom,lpass-lpi-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
description: Specifies the TLMM summary IRQ
maxItems: 1
- interrupt-controller: true
-
- '#interrupt-cells':
- description:
- Specifies the PIN numbers and Flags, as defined in defined in
- include/dt-bindings/interrupt-controller/irq.h
- const: 2
-
- gpio-controller: true
-
- '#gpio-cells':
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
gpio-reserved-ranges:
minItems: 1
maxItems: 88
gpio-line-names:
maxItems: 175
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
required:
- compatible
- reg
- - interrupts
- - interrupt-controller
- - '#interrupt-cells'
- - gpio-controller
- - '#gpio-cells'
- - gpio-ranges
-
-additionalProperties: false
+
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- '#interrupt-cells': true
- gpio-controller: true
gpio-reserved-ranges: true
- '#gpio-cells': true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
- - reg-names
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-bus-hold: true
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 57
gpio-line-names:
maxItems: 114
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges:
minItems: 1
maxItems: 75
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 75
gpio-line-names:
maxItems: 150
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
-
gpio-reserved-ranges:
maxItems: 1
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
-
gpio-reserved-ranges:
maxItems: 1
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg:
maxItems: 1
- interrupts: true
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
+ interrupts:
+ maxItems: 1
gpio-reserved-ranges:
minItems: 1
gpio-line-names:
maxItems: 133
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM4450 TLMM block
+
+maintainers:
+ - Tengfei Fan <quic_tengfan@quicinc.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm4450-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 68
+
+ gpio-line-names:
+ maxItems: 136
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm4450-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm4450-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm4450-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+ atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
+ atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
+ jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
+ mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
+ phase_flag0, phase_flag1, phase_flag10, phase_flag11,
+ phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+ phase_flag16, phase_flag17, phase_flag18, phase_flag19,
+ phase_flag2, phase_flag20, phase_flag21, phase_flag22,
+ phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+ phase_flag27, phase_flag28, phase_flag29, phase_flag3,
+ phase_flag30, phase_flag31, phase_flag4, phase_flag5,
+ phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+ pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
+ prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
+ qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+ qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
+ qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+ qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+ qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
+ qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+ qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
+ tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+ tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
+ uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
+ vsense_trigger ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm4450-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 137>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio23";
+ function = "qup1_se2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio22";
+ function = "qup1_se2";
+ bias-disable;
+ };
+ };
+ };
+...
items:
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-bus-hold: true
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
gpio-reserved-ranges: true
- wakeup-parent: true
patternProperties:
"-state$":
- reg
- reg-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
- - reg-names
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
minItems: 9
maxItems: 9
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 78
gpio-line-names:
maxItems: 156
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
gpio-reserved-ranges: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
patternProperties:
"-state$":
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 60
- reg
- reg-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 88
- reg
- reg-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-pull-down: true
- bias-pull-up: true
- bias-bus-hold: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 90
- reg
- reg-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-bus-hold: true
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 102
gpio-line-names:
maxItems: 203
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-bus-hold: true
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
interrupts:
maxItems: 1
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
-
gpio-reserved-ranges:
minItems: 1
maxItems: 105
gpio-line-names:
maxItems: 210
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
patternProperties:
"-state$":
oneOf:
required:
- pins
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
properties:
compatible:
- const: qcom,sm8550-lpass-lpi-pinctrl
+ oneOf:
+ - const: qcom,sm8550-lpass-lpi-pinctrl
+ - items:
+ - const: qcom,x1e80100-lpass-lpi-pinctrl
+ - const: qcom,sm8550-lpass-lpi-pinctrl
reg:
items:
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-bus-hold: true
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg:
maxItems: 1
- interrupts: true
- interrupt-controller: true
- "#interrupt-cells": true
- gpio-controller: true
+ interrupts:
+ maxItems: 1
gpio-reserved-ranges:
minItems: 1
gpio-line-names:
maxItems: 210
- "#gpio-cells": true
- gpio-ranges: true
- wakeup-parent: true
-
patternProperties:
"-state$":
oneOf:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 SoC LPASS LPI TLMM
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8650-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8650-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8650-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8650-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+ function:
+ enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+ dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+ ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+ i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+ i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+ i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk,
+ slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data,
+ wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+allOf:
+ - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+ lpass_tlmm: pinctrl@6e80000 {
+ compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+ reg = <0x06e80000 0x20000>;
+
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+ tx-swr-sleep-clk-state {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8650 TLMM block
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8650-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 105
+
+ gpio-line-names:
+ maxItems: 210
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8650-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8650-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8650-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+ audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4,
+ cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
+ cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx,
+ coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete,
+ ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1,
+ gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0,
+ i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
+ i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+ i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+ i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c,
+ jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0,
+ nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n,
+ pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+ qdss_gpio, qlink_big_enable, qlink_big_request,
+ qlink_little_enable, qlink_little_request, qlink_wmss,
+ qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0,
+ qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6,
+ qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4,
+ qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+ tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk,
+ uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1,
+ vsense_trigger_mirnat ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8650-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 211>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio60";
+ function = "qup1_se7";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio61";
+ function = "qup1_se7";
+ bias-disable;
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. X1E80100 TLMM block
+
+maintainers:
+ - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,x1e80100-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 119
+
+ gpio-line-names:
+ maxItems: 238
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-x1e80100-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-x1e80100-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ aon_cci, aoss_cti, atest_char, atest_char0,
+ atest_char1, atest_char2, atest_char3, atest_usb,
+ audio_ext, audio_ref, cam_aon, cam_mclk, cci_async,
+ cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3,
+ cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7,
+ edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac,
+ eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2,
+ gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0,
+ i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5,
+ mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk,
+ pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+ qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0,
+ qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+ qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2,
+ qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk,
+ sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle,
+ tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5,
+ tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+ tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy,
+ usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx,
+ usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,x1e80100-tlmm";
+ reg = <0x0f100000 0xf00000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 239>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio26";
+ function = "qup2_se7";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio27";
+ function = "qup2_se7";
+ bias-disable;
+ };
+ };
+ };
+...
properties:
compatible:
- const: "renesas,r7s9210-pinctrl" # RZ/A2M
+ const: renesas,r7s9210-pinctrl # RZ/A2M
reg:
maxItems: 1
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
<RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
- power-source = <3300>;
+ power-source = <3300>;
};
};
};
properties:
compatible:
- enum:
- - samsung,s3c2410-wakeup-eint
- - samsung,s3c2412-wakeup-eint
- - samsung,s3c64xx-wakeup-eint
- - samsung,s5pv210-wakeup-eint
- - samsung,exynos4210-wakeup-eint
- - samsung,exynos7-wakeup-eint
- - samsung,exynos850-wakeup-eint
- - samsung,exynosautov9-wakeup-eint
+ oneOf:
+ - enum:
+ - samsung,s3c2410-wakeup-eint
+ - samsung,s3c2412-wakeup-eint
+ - samsung,s3c64xx-wakeup-eint
+ - samsung,s5pv210-wakeup-eint
+ - samsung,exynos4210-wakeup-eint
+ - samsung,exynos7-wakeup-eint
+ - samsung,exynosautov920-wakeup-eint
+ - items:
+ - enum:
+ - samsung,exynos5433-wakeup-eint
+ - samsung,exynos7885-wakeup-eint
+ - samsung,exynos850-wakeup-eint
+ - const: samsung,exynos7-wakeup-eint
+ - items:
+ - enum:
+ - google,gs101-wakeup-eint
+ - samsung,exynosautov9-wakeup-eint
+ - const: samsung,exynos850-wakeup-eint
+ - const: samsung,exynos7-wakeup-eint
interrupts:
description:
- if:
properties:
compatible:
- contains:
- enum:
- - samsung,s5pv210-wakeup-eint
- - samsung,exynos4210-wakeup-eint
- - samsung,exynos7-wakeup-eint
+ # Match without "contains", to skip newer variants which are still
+ # compatible with samsung,exynos7-wakeup-eint
+ enum:
+ - samsung,s5pv210-wakeup-eint
+ - samsung,exynos4210-wakeup-eint
+ - samsung,exynos5433-wakeup-eint
+ - samsung,exynos7-wakeup-eint
+ - samsung,exynos7885-wakeup-eint
then:
properties:
interrupts:
contains:
enum:
- samsung,exynos850-wakeup-eint
- - samsung,exynosautov9-wakeup-eint
+ - samsung,exynosautov920-wakeup-eint
then:
properties:
interrupts: false
compatible:
enum:
+ - google,gs101-pinctrl
- samsung,s3c2412-pinctrl
- samsung,s3c2416-pinctrl
- samsung,s3c2440-pinctrl
- samsung,exynos7885-pinctrl
- samsung,exynos850-pinctrl
- samsung,exynosautov9-pinctrl
+ - samsung,exynosautov920-pinctrl
- tesla,fsd-pinctrl
interrupts:
pinctrl-0 = <&initial_alive>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos7-wakeup-eint";
+ compatible = "samsung,exynos5433-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
};
phandle to the SLCR.
patternProperties:
- '^(.*-)?(default|gpio)$':
+ '^(.*-)?(default|gpio-grp)$':
type: object
patternProperties:
'^mux':
const: xlnx,zynqmp-pinctrl
patternProperties:
- '^(.*-)?(default|gpio)$':
+ '^(.*-)?(default|gpio-grp)$':
type: object
patternProperties:
'^mux':
compatible:
items:
- enum:
+ - fsl,imx8dl-scu-pd
- fsl,imx8qm-scu-pd
- fsl,imx8qxp-scu-pd
- const: fsl,scu-pd
- qcom,sc7280-rpmhpd
- qcom,sc8180x-rpmhpd
- qcom,sc8280xp-rpmhpd
- - qcom,sc8380xp-rpmhpd
- qcom,sdm660-rpmpd
- qcom,sdm670-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sm8450-rpmhpd
- qcom,sm8550-rpmhpd
- qcom,sm8650-rpmhpd
+ - qcom,x1e80100-rpmhpd
- items:
- enum:
- qcom,msm8937-rpmpd
items:
- const: reboot-mode
-patternProperties:
- "^mode-.+":
- $ref: /schemas/types.yaml#/definitions/uint32
- description: Vendor-specific mode value written to the mode register
+allOf:
+ - $ref: reboot-mode.yaml#
required:
- compatible
- nvmem-cells
- nvmem-cell-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
- spmi_bus: spmi@c440000 {
+
+ spmi@c440000 {
reg = <0x0c440000 0x1100>;
#address-cells = <2>;
#size-cells = <0>;
- pmk8350: pmic@0 {
+
+ pmic@0 {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- pmk8350_pon: pon_hlos@1300 {
- reg = <0x1300>;
+
+ pon@800 {
compatible = "qcom,pm8998-pon";
+ reg = <0x800>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
- interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
$ref: /schemas/types.yaml#/definitions/uint32
description: Offset in the register map for the mode register (in bytes)
-patternProperties:
- "^mode-.+":
- $ref: /schemas/types.yaml#/definitions/uint32
- description: Vendor-specific mode value written to the mode register
+allOf:
+ - $ref: reboot-mode.yaml#
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
firmware {
zynqmp-firmware {
- zynqmp-power {
+ power-management {
compatible = "xlnx,zynqmp-power";
interrupts = <0 35 4>;
};
firmware {
zynqmp-firmware {
- zynqmp-power {
+ power-management {
compatible = "xlnx,zynqmp-power";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
- ti,bq24192
- ti,bq24192i
- ti,bq24196
+ - ti,bq24296
reg:
maxItems: 1
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- richtek,output-charge-current = <500000>;
- richtek,end-of-charge-percentage = <10>;
- richtek,battery-regulation-voltage = <4200000>;
- richtek,boost-output-voltage = <5050000>;
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
richtek,min-input-voltage-regulation = <4500000>;
richtek,avg-input-current-regulation = <500000>;
Any device nodes
----------------
-Nodes that describe devices which has wakeup capability must contain an
+Nodes that describe devices which have wakeup capability may contain a
"wakeup-source" boolean property.
-Also, if device is marked as a wakeup source, then all the primary
-interrupt(s) can be used as wakeup interrupt(s).
+If the device is marked as a wakeup-source, interrupt wake capability depends
+on the device specific "interrupt-names" property. If no interrupts are labeled
+as wake capable, then it is up to the device to determine which interrupts can
+wake the system.
-However if the devices have dedicated interrupt as the wakeup source
-then they need to specify/identify the same using device specific
-interrupt name. In such cases only that interrupt can be used as wakeup
-interrupt.
+However if a device has a dedicated interrupt as the wakeup source, then it
+needs to specify/identify it using a device specific interrupt name. In such
+cases only that interrupt can be used as a wakeup interrupt.
+
+While various legacy interrupt names exist, new devices should use "wakeup" as
+the canonical interrupt name.
List of legacy properties and respective binding document
---------------------------------------------------------
maintainers:
- Jitao Shi <jitao.shi@mediatek.com>
- - Xinlei Lee <xinlei.lee@mediatek.com>
allOf:
- $ref: pwm.yaml#
+++ /dev/null
-* OMAP PWM for dual-mode timers
-
-Required properties:
-- compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
- about these timers.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
- the cells format.
-
-Optional properties:
-- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
-- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
- - 0x00 - high-frequency system clock (timer_sys_ck)
- - 0x01 - 32-kHz always-on clock (timer_32k_ck)
- - 0x02 - external clock (timer_ext_ck, OMAP2 only)
-
-Example:
- pwm9: dmtimer-pwm@9 {
- compatible = "ti,omap-dmtimer-pwm";
- ti,timers = <&timer9>;
- #pwm-cells = <3>;
- };
- samsung,exynos4210-pwm # 32-bit, Exynos
- items:
- enum:
+ - samsung,exynos5433-pwm
+ - samsung,exynos7-pwm
- samsung,exynosautov9-pwm
+ - samsung,exynosautov920-pwm
+ - tesla,fsd-pwm
- const: samsung,exynos4210-pwm
reg:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/ti,omap-dmtimer-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual mode timer PWM controller
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+description:
+ TI dual mode timer instances have an IO pin for PWM capability
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ const: ti,omap-dmtimer-pwm
+
+ "#pwm-cells":
+ const: 3
+
+ ti,timers:
+ description: Timer instance phandle for the PWM
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ ti,prescaler:
+ description: |
+ Legacy clock prescaler for timer. The timer counter is prescaled
+ with 2^n where n is the prescaler.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+ deprecated: true
+
+ ti,clock-source:
+ description: |
+ Legacy clock for timer, please use assigned-clocks instead.
+ 0x00 - high-frequency system clock (timer_sys_ck)
+ 0x01 - 32-kHz always-on clock (timer_32k_ck)
+ 0x02 - external clock (timer_ext_ck, OMAP2 only)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+ deprecated: true
+
+required:
+ - compatible
+ - ti,timers
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pwm9: pwm {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer9>;
+ #pwm-cells = <3>;
+ };
description:
Interrupt signaling a critical under-voltage event.
+ system-critical-regulator: true
+
required:
- compatible
- regulator-name
regulator-name = "buck1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
};
regulator-name = "buck1";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <3587500>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <7600000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <7600000>;
regulator-boot-on;
mps,buck-ovp-disable;
mps,buck-phase-delay = /bits/ 8 <2>;
For PM7325, smps1 - smps8, ldo1 - ldo19
For PM8005, smps1 - smps4
For PM8009, smps1 - smps2, ldo1 - ldo7
+ For PM8010, ldo1 - ldo7
For PM8150, smps1 - smps10, ldo1 - ldo18
For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
For PM8350, smps1 - smps12, ldo1 - ldo10
- qcom,pm8005-rpmh-regulators
- qcom,pm8009-rpmh-regulators
- qcom,pm8009-1-rpmh-regulators
+ - qcom,pm8010-rpmh-regulators
- qcom,pm8150-rpmh-regulators
- qcom,pm8150l-rpmh-regulators
- qcom,pm8350-rpmh-regulators
"^vdd-l[1-47]-supply$": true
"^vdd-s[1-2]-supply$": true
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,pm8010-rpmh-regulators
+ then:
+ properties:
+ vdd-l1-l2-supply: true
+ vdd-l3-l4-supply: true
+ patternProperties:
+ "^vdd-l[5-7]-supply$": true
+
- if:
properties:
compatible:
For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l13, l14, l15, l16, l17, l18
+ For pm8937, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+ l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23
+
For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
lvs3, 5vs1, 5vs2
- qcom,rpm-pm8841-regulators
- qcom,rpm-pm8909-regulators
- qcom,rpm-pm8916-regulators
+ - qcom,rpm-pm8937-regulators
- qcom,rpm-pm8941-regulators
- qcom,rpm-pm8950-regulators
- qcom,rpm-pm8953-regulators
- qcom,pm8841-regulators
- qcom,pm8909-regulators
- qcom,pm8916-regulators
+ - qcom,pm8937-regulators
- qcom,pm8941-regulators
- qcom,pm8950-regulators
- qcom,pm8994-regulators
patternProperties:
"^vdd_s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8937-regulators
+ then:
+ properties:
+ vdd_l1_l19-supply: true
+ vdd_l20_l21-supply: true
+ vdd_l2_l23-supply: true
+ vdd_l3-supply: true
+ vdd_l4_l5_l6_l7_l16-supply: true
+ vdd_l8_l11_l12_l17_l22-supply: true
+ vdd_l9_l10_l13_l14_l15_l18-supply: true
+ patternProperties:
+ "^vdd_s[1-6]-supply$": true
+
- if:
properties:
compatible:
examples:
- |
- pm8150b {
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
- pm8150b_vbus: usb-vbus-regulator@1100 {
+
+ usb-vbus-regulator@1100 {
compatible = "qcom,pm8150b-vbus-reg";
reg = <0x1100>;
regulator-min-microamp = <500000>;
description: Enable pull down resistor when the regulator is disabled.
type: boolean
+ system-critical-regulator:
+ description: Set if the regulator is critical to system stability or
+ functionality.
+ type: boolean
+
regulator-over-current-protection:
description: Enable over current protection.
type: boolean
be enabled but limit setting can be omitted. Limit is given as microvolt
offset from voltage set to regulator.
+ regulator-uv-less-critical-window-ms:
+ description: Specifies the time window (in milliseconds) following a
+ critical under-voltage event during which the system can continue to
+ operate safely while performing less critical operations. This property
+ provides a defined duration before a more severe reaction to the
+ under-voltage event is needed, allowing for certain non-urgent actions to
+ be carried out in preparation for potential power loss.
+
regulator-temp-protection-kelvin:
description: Set over temperature protection limit. This is a limit where
hardware performs emergency shutdown. Zero can be passed to disable
};
imx7d-cm4 {
- compatible = "fsl,imx7d-cm4";
- memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
- syscon = <&src>;
- clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+ compatible = "fsl,imx7d-cm4";
+ memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+ syscon = <&src>;
+ clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
};
- |
enum:
- qcom,sc7180-adsp-pas
- qcom,sc7180-mpss-pas
+ - qcom,sc7280-adsp-pas
+ - qcom,sc7280-cdsp-pas
- qcom,sc7280-mpss-pas
+ - qcom,sc7280-wpss-pas
reg:
maxItems: 1
compatible:
enum:
- qcom,sc7180-adsp-pas
+ - qcom,sc7280-adsp-pas
then:
properties:
power-domains:
compatible:
enum:
- qcom,sc7280-mpss-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MSS power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mss
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7280-cdsp-pas
+ - qcom,sc7280-wpss-pas
then:
properties:
power-domains:
- amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
- amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
- amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+ - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
reg:
maxItems: 1
properties:
compatible:
oneOf:
- - const: "fsl,imx51-src"
+ - const: fsl,imx51-src
- items:
- - const: "fsl,imx50-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx53-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx6q-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx6sx-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx6sl-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx6ul-src"
- - const: "fsl,imx51-src"
- - items:
- - const: "fsl,imx6sll-src"
- - const: "fsl,imx51-src"
+ - enum:
+ - fsl,imx50-src
+ - fsl,imx53-src
+ - fsl,imx6q-src
+ - fsl,imx6sx-src
+ - fsl,imx6sl-src
+ - fsl,imx6ul-src
+ - fsl,imx6sll-src
+ - const: fsl,imx51-src
reg:
maxItems: 1
examples:
- |
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/hi3660-clock.h>
-
- iomcu: iomcu@ffd7e000 {
- compatible = "hisilicon,hi3660-iomcu", "syscon";
- reg = <0xffd7e000 0x1000>;
- };
-
- iomcu_rst: iomcu_rst_controller {
+ iomcu_rst_controller {
compatible = "hisilicon,hi3660-reset";
hisilicon,rst-syscon = <&iomcu>;
#reset-cells = <2>;
};
-
- /* Specifying reset lines connected to IP modules */
- i2c@ffd71000 {
- compatible = "snps,designware-i2c";
- reg = <0xffd71000 0x1000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <400000>;
- clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
- resets = <&iomcu_rst 0x20 3>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
- };
...
oneOf:
- description: on SC7180 SoCs the following compatibles must be specified
items:
- - const: "qcom,sc7180-aoss-cc"
- - const: "qcom,sdm845-aoss-cc"
+ - const: qcom,sc7180-aoss-cc
+ - const: qcom,sdm845-aoss-cc
- description: on SC7280 SoCs the following compatibles must be specified
items:
- - const: "qcom,sc7280-aoss-cc"
- - const: "qcom,sdm845-aoss-cc"
+ - const: qcom,sc7280-aoss-cc
+ - const: qcom,sdm845-aoss-cc
- description: on SDM845 SoCs the following compatibles must be specified
items:
- - const: "qcom,sdm845-aoss-cc"
+ - const: qcom,sdm845-aoss-cc
reg:
maxItems: 1
oneOf:
- description: on SC7180 SoCs the following compatibles must be specified
items:
- - const: "qcom,sc7180-pdc-global"
- - const: "qcom,sdm845-pdc-global"
+ - const: qcom,sc7180-pdc-global
+ - const: qcom,sdm845-pdc-global
- description: on SC7280 SoCs the following compatibles must be specified
items:
- - const: "qcom,sc7280-pdc-global"
+ - const: qcom,sc7280-pdc-global
- description: on SDM845 SoCs the following compatibles must be specified
items:
- - const: "qcom,sdm845-pdc-global"
+ - const: qcom,sdm845-pdc-global
reg:
maxItems: 1
compatible:
items:
- enum:
- - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
+ - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five
- renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
- renesas,r9a07g054-usbphy-ctrl # RZ/V2L
- const: renesas,rzg2l-usbphy-ctrl
title: Zynq UltraScale+ MPSoC and Versal reset
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
description: |
The Zynq UltraScale+ MPSoC and Versal has several different resets.
oneOf:
- items:
- enum:
+ - amd,mbv32
- andestech,ax45mp
- canaan,k210
- sifive,bullet0
mmu-type:
description:
- Identifies the MMU address translation mode used on this
- hart. These values originate from the RISC-V Privileged
+ Identifies the largest MMU address translation mode supported by
+ this hart. These values originate from the RISC-V Privileged
Specification document, available from
https://riscv.org/specifications/
$ref: /schemas/types.yaml#/definitions/string
description:
The blocksize in bytes for the Zicbom cache operations.
+ riscv,cbop-block-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The blocksize in bytes for the Zicbop cache operations.
+
riscv,cboz-block-size:
$ref: /schemas/types.yaml#/definitions/uint32
description:
insensitive, letters in the riscv,isa string must be all
lowercase.
$ref: /schemas/types.yaml#/definitions/string
- pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+ pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[0-9a-z])+)?(?:_[hsxz](?:[0-9a-z])+)*$
deprecated: true
riscv,isa-base:
memory types as ratified in the 20191213 version of the privileged
ISA specification.
+ - const: zacas
+ description: |
+ The Zacas extension for Atomic Compare-and-Swap (CAS) instructions
+ is supported as ratified at commit 5059e0ca641c ("update to
+ ratified") of the riscv-zacas.
+
- const: zba
description: |
The standard Zba bit-manipulation extension for address generation
multiplication as ratified at commit 6d33919 ("Merge pull request
#158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+ - const: zbkb
+ description:
+ The standard Zbkb bitmanip instructions for cryptography as ratified
+ in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zbkc
+ description:
+ The standard Zbkc carry-less multiply instructions as ratified
+ in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zbkx
+ description:
+ The standard Zbkx crossbar permutation instructions as ratified
+ in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
- const: zbs
description: |
The standard Zbs bit-manipulation extension for single-bit
instructions as ratified at commit 6d33919 ("Merge pull request #158
from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+ - const: zfa
+ description:
+ The standard Zfa extension for additional floating point
+ instructions, as ratified in commit 056b6ff ("Zfa is ratified") of
+ riscv-isa-manual.
+
+ - const: zfh
+ description:
+ The standard Zfh extension for 16-bit half-precision binary
+ floating-point instructions, as ratified in commit 64074bc ("Update
+ version numbers for Zfh/Zfinx") of riscv-isa-manual.
+
+ - const: zfhmin
+ description:
+ The standard Zfhmin extension which provides minimal support for
+ 16-bit half-precision binary floating-point instructions, as ratified
+ in commit 64074bc ("Update version numbers for Zfh/Zfinx") of
+ riscv-isa-manual.
+
+ - const: zk
+ description:
+ The standard Zk Standard Scalar cryptography extension as ratified
+ in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zkn
+ description:
+ The standard Zkn NIST algorithm suite extensions as ratified in
+ version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zknd
+ description: |
+ The standard Zknd for NIST suite: AES decryption instructions as
+ ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zkne
+ description: |
+ The standard Zkne for NIST suite: AES encryption instructions as
+ ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zknh
+ description: |
+ The standard Zknh for NIST suite: hash function instructions as
+ ratified in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zkr
+ description:
+ The standard Zkr entropy source extension as ratified in version
+ 1.0 of RISC-V Cryptography Extensions Volume I specification.
+ This string being present means that the CSR associated to this
+ extension is accessible at the privilege level to which that
+ device-tree has been provided.
+
+ - const: zks
+ description:
+ The standard Zks ShangMi algorithm suite extensions as ratified in
+ version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
+ - const: zksed
+ description: |
+ The standard Zksed for ShangMi suite: SM4 block cipher instructions
+ as ratified in version 1.0 of RISC-V Cryptography Extensions
+ Volume I specification.
+
+ - const: zksh
+ description: |
+ The standard Zksh for ShangMi suite: SM3 hash function instructions
+ as ratified in version 1.0 of RISC-V Cryptography Extensions
+ Volume I specification.
+
+ - const: zkt
+ description:
+ The standard Zkt for data independent execution latency as ratified
+ in version 1.0 of RISC-V Cryptography Extensions Volume I
+ specification.
+
- const: zicbom
description:
The standard Zicbom extension for base cache management operations as
The standard Zihintpause extension for pause hints, as ratified in
commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
+ - const: zihintntl
+ description:
+ The standard Zihintntl extension for non-temporal locality hints, as
+ ratified in commit 0dc91f5 ("Zihintntl is ratified") of the
+ riscv-isa-manual.
+
- const: zihpm
description:
The standard Zihpm extension for hardware performance counters, as
in commit 2e5236 ("Ztso is now ratified.") of the
riscv-isa-manual.
+ - const: zvbb
+ description:
+ The standard Zvbb extension for vectored basic bit-manipulation
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvbc
+ description:
+ The standard Zvbc extension for vectored carryless multiplication
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvfh
+ description:
+ The standard Zvfh extension for vectored half-precision
+ floating-point instructions, as ratified in commit e2ccd05
+ ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+ - const: zvfhmin
+ description:
+ The standard Zvfhmin extension for vectored minimal half-precision
+ floating-point instructions, as ratified in commit e2ccd05
+ ("Remove draft warnings from Zvfh[min]") of riscv-v-spec.
+
+ - const: zvkb
+ description:
+ The standard Zvkb extension for vector cryptography bit-manipulation
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvkg
+ description:
+ The standard Zvkg extension for vector GCM/GMAC instructions, as
+ ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+ of riscv-crypto.
+
+ - const: zvkn
+ description:
+ The standard Zvkn extension for NIST algorithm suite instructions, as
+ ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc")
+ of riscv-crypto.
+
+ - const: zvknc
+ description:
+ The standard Zvknc extension for NIST algorithm suite with carryless
+ multiply instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvkned
+ description:
+ The standard Zvkned extension for Vector AES block cipher
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvkng
+ description:
+ The standard Zvkng extension for NIST algorithm suite with GCM
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvknha
+ description: |
+ The standard Zvknha extension for NIST suite: vector SHA-2 secure,
+ hash (SHA-256 only) instructions, as ratified in commit
+ 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvknhb
+ description: |
+ The standard Zvknhb extension for NIST suite: vector SHA-2 secure,
+ hash (SHA-256 and SHA-512) instructions, as ratified in commit
+ 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvks
+ description:
+ The standard Zvks extension for ShangMi algorithm suite
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvksc
+ description:
+ The standard Zvksc extension for ShangMi algorithm suite with
+ carryless multiplication instructions, as ratified in commit 56ed795
+ ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvksed
+ description: |
+ The standard Zvksed extension for ShangMi suite: SM4 block cipher
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvksh
+ description: |
+ The standard Zvksh extension for ShangMi suite: SM3 secure hash
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvksg
+ description:
+ The standard Zvksg extension for ShangMi algorithm suite with GCM
+ instructions, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
+ - const: zvkt
+ description:
+ The standard Zvkt extension for vector data-independent execution
+ latency, as ratified in commit 56ed795 ("Update
+ riscv-crypto-spec-vector.adoc") of riscv-crypto.
+
additionalProperties: true
...
- enum:
- milkv,duo
- const: sophgo,cv1800b
+ - items:
+ - enum:
+ - sophgo,huashan-pi
+ - const: sophgo,cv1812h
- items:
- enum:
- milkv,pioneer
properties:
compatible:
- const: starfive,jh7110-trng
+ oneOf:
+ - items:
+ - const: starfive,jh8100-trng
+ - const: starfive,jh7110-trng
+ - const: starfive,jh7110-trng
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31335 RTC
+
+maintainers:
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description:
+ Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with
+ Integrated MEMS Resonator.
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ const: adi,max31335
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#clock-cells":
+ description:
+ RTC can be used as a clock source through its clock output pin.
+ const: 0
+
+ adi,tc-diode:
+ description:
+ Select the diode configuration for the trickle charger.
+ schottky - Schottky diode in series.
+ standard+schottky - standard diode + Schottky diode in series.
+ enum: [schottky, standard+schottky]
+
+ trickle-resistor-ohms:
+ description:
+ Selected resistor for trickle charger. Should be specified if trickle
+ charger should be enabled.
+ enum: [3000, 6000, 11000]
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "adi,max31335";
+ reg = <0x68>;
+ pinctrl-0 = <&rtc_nint_pins>;
+ interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+ aux-voltage-chargeable = <1>;
+ trickle-resistor-ohms = <6000>;
+ adi,tc-diode = "schottky";
+ };
+ };
+...
trickle-diode-disable: true
+ wakeup-source: true
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,ma35d1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Real Time Clock
+
+maintainers:
+ - Min-Jen Chen <mjchen@nuvoton.com>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,ma35d1-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+ rtc@40410000 {
+ compatible = "nuvoton,ma35d1-rtc";
+ reg = <0x40410000 0x200>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk RTC_GATE>;
+ };
+
+...
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
- spmi_bus: spmi@c440000 {
- reg = <0x0c440000 0x1100>;
- #address-cells = <2>;
- #size-cells = <0>;
- pmicintc: pmic@0 {
- reg = <0x0 SPMI_USID>;
- compatible = "qcom,pm8921";
- interrupts = <104 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
+
+ spmi {
+ #address-cells = <2>;
#size-cells = <0>;
- pm8921_rtc: rtc@11d {
- compatible = "qcom,pm8921-rtc";
- reg = <0x11d>;
- interrupts = <0x27 0>;
- nvmem-cells = <&rtc_offset>;
- nvmem-cell-names = "offset";
+ pmic@0 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ nvmem-cells = <&rtc_offset>;
+ nvmem-cell-names = "offset";
+ };
};
- };
};
...
- samsung,s3c2416-rtc
- samsung,s3c2443-rtc
- samsung,s3c6410-rtc
+ - items:
+ - enum:
+ - samsung,exynos7-rtc
+ - samsung,exynos850-rtc
+ - const: samsung,s3c6410-rtc
- const: samsung,exynos3250-rtc
deprecated: true
+++ /dev/null
-* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus.
-
-H1 Secure Microcontroller running Cr50 firmware provides several
-functions, including TPM-like functionality. It communicates over
-SPI using the FIFO protocol described in the PTP Spec, section 6.
-
-Required properties:
-- compatible: Should be "google,cr50".
-- spi-max-frequency: Maximum SPI frequency.
-
-Example:
-
-&spi0 {
- tpm@0 {
- compatible = "google,cr50";
- reg = <0>;
- spi-max-frequency = <800000>;
- };
-};
+++ /dev/null
-* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
-
-Required properties:
-
-- compatible : property name that conveys the platform architecture
- identifiers, as 'IBM,vtpm'
-- device_type : specifies type of virtual device
-- interrupts : property specifying the interrupt source number and
- sense code associated with this virtual I/O Adapters
-- ibm,my-drc-index : integer index for the connector between the device
- and its parent - present only if Dynamic
- Reconfiguration(DR) Connector is enabled
-- ibm,#dma-address-cells: specifies the number of cells that are used to
- encode the physical address field of dma-window
- properties
-- ibm,#dma-size-cells : specifies the number of cells that are used to
- encode the size field of dma-window properties
-- ibm,my-dma-window : specifies DMA window associated with this virtual
- IOA
-- ibm,loc-code : specifies the unique and persistent location code
- associated with this virtual I/O Adapters
-- linux,sml-base : 64-bit base address of the reserved memory allocated
- for the firmware event log
-- linux,sml-size : size of the memory allocated for the firmware event log
-
-Example (IBM Virtual Trusted Platform Module)
----------------------------------------------
-
- vtpm@30000003 {
- ibm,#dma-size-cells = <0x2>;
- compatible = "IBM,vtpm";
- device_type = "IBM,vtpm";
- ibm,my-drc-index = <0x30000003>;
- ibm,#dma-address-cells = <0x2>;
- linux,sml-base = <0xc60e 0x0>;
- interrupts = <0xa0003 0x0>;
- ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
- ibm,loc-code = "U8286.41A.10082DV-V3-C3";
- reg = <0x30000003>;
- linux,sml-size = <0xbce10200>;
- };
+++ /dev/null
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
-
-&i2c2 {
-
-
- st33zp24: st33zp24@13 {
-
- compatible = "st,st33zp24-i2c";
-
- reg = <0x13>;
- clock-frequency = <400000>;
-
- interrupt-parent = <&gpio5>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
- lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
- };
-};
+++ /dev/null
-* STMicroelectronics SAS. ST33ZP24 TPM SoC
-
-Required properties:
-- compatible: Should be "st,st33zp24-spi".
-- spi-max-frequency: Maximum SPI frequency (<= 10000000).
-
-Optional ST33ZP24 Properties:
-- interrupts: GPIO interrupt to which the chip is connected
-- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
-If set, power must be present when the platform is going into sleep/hibernate mode.
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
-
-&mcspi4 {
-
-
- st33zp24@0 {
-
- compatible = "st,st33zp24-spi";
-
- spi-max-frequency = <10000000>;
-
- interrupt-parent = <&gpio5>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-
- lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
- };
-};
+++ /dev/null
-* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
-
-Required properties:
-
-- compatible : 'manufacturer,model', eg. nuvoton,npct650
-- label : human readable string describing the device, eg. "tpm"
-- linux,sml-base : 64-bit base address of the reserved memory allocated for
- the firmware event log
-- linux,sml-size : size of the memory allocated for the firmware event log
-
-Optional properties:
-
-- powered-while-suspended: present when the TPM is left powered on between
- suspend and resume (makes the suspend/resume
- callbacks do nothing).
-
-Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
-----------------------------------------------------------
-
-tpm@57 {
- reg = <0x57>;
- label = "tpm";
- compatible = "nuvoton,npct650", "nuvoton,npct601";
- linux,sml-base = <0x7f 0xfd450000>;
- linux,sml-size = <0x10000>;
-};
+++ /dev/null
-Trusted Computing Group MMIO Trusted Platform Module
-
-The TCG defines multi vendor standard for accessing a TPM chip, this
-is the standard protocol defined to access the TPM via MMIO. Typically
-this interface will be implemented over Intel's LPC bus.
-
-Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
-publication for the specification.
-
-Required properties:
-
-- compatible: should contain a string below for the chip, followed by
- "tcg,tpm-tis-mmio". Valid chip strings are:
- * "atmel,at97sc3204"
-- reg: The location of the MMIO registers, should be at least 0x5000 bytes
-- interrupts: An optional interrupt indicating command completion.
-
-Example:
-
- tpm_tis@90000 {
- compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
- reg = <0x90000 0x5000>;
- interrupt-parent = <&EIC0>;
- interrupts = <1 2>;
- };
+++ /dev/null
-Required properties:
-- compatible: should be one of the following
- "st,st33htpm-spi"
- "infineon,slb9670"
- "tcg,tpm_tis-spi"
-- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
-
-&mcspi4 {
-
-
- tpm_tis@0 {
-
- compatible = "tcg,tpm_tis-spi";
-
- spi-max-frequency = <10000000>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/arm,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DCC (Data communication channel) serial emulation
+
+maintainers:
+ - Michal Simek <michal.simek@amd.com>
+
+description: |
+ ARM DCC (Data communication channel) serial emulation interface available
+ via JTAG can be also used as one of serial line tightly coupled with every
+ ARM CPU available in the system.
+
+properties:
+ compatible:
+ const: arm,dcc
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ serial {
+ compatible = "arm,dcc";
+ };
https://www.nxp.com/webapp/Download?colCode=S32V234RM.
maintainers:
- - Chester Lin <clin@suse.com>
+ - Chester Lin <chester62515@gmail.com>
allOf:
- $ref: serial.yaml#
maintainers:
- Fabio Estevam <festevam@gmail.com>
-allOf:
- - $ref: serial.yaml#
- - $ref: rs485.yaml#
-
properties:
compatible:
oneOf:
- const: tx
interrupts:
- maxItems: 1
+ items:
+ - description: UART RX Interrupt
+ - description: UART TX Interrupt
+ - description: UART RTS Interrupt
+ minItems: 1
wakeup-source: true
- clock-names
- interrupts
+allOf:
+ - $ref: serial.yaml#
+ - $ref: rs485.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx1-uart
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
- const: tx
- const: rx
+ interconnects:
+ maxItems: 1
+
interrupts:
maxItems: 1
+ operating-points-v2: true
+
+ power-domains:
+ maxItems: 1
+
qcom,rx-crci:
$ref: /schemas/types.yaml#/definitions/uint32
description:
examples:
- |
+ #include <dt-bindings/interconnect/qcom,msm8996.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
clock-names = "core", "iface";
dmas = <&dma0 0>, <&dma0 1>;
dma-names = "tx", "rx";
+ power-domains = <&rpmpd MSM8996_VDDCX>;
+ operating-points-v2 = <&uart_opp_table>;
+ interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>;
};
oneOf:
- items:
- enum:
- - renesas,r9a07g043-sci # RZ/G2UL
+ - renesas,r9a07g043-sci # RZ/G2UL and RZ/Five
- renesas,r9a07g044-sci # RZ/G2{L,LC}
- renesas,r9a07g054-sci # RZ/V2L
- const: renesas,sci # generic SCI compatible UART
properties:
compatible:
oneOf:
- - items:
- - const: samsung,exynosautov9-uart
- - const: samsung,exynos850-uart
- enum:
- apple,s5l-uart
- axis,artpec8-uart
+ - google,gs101-uart
- samsung,s3c6400-uart
- samsung,s5pv210-uart
- samsung,exynos4210-uart
- samsung,exynos5433-uart
- samsung,exynos850-uart
+ - items:
+ - enum:
+ - samsung,exynos7-uart
+ - tesla,fsd-uart
+ - const: samsung,exynos4210-uart
+ - items:
+ - enum:
+ - samsung,exynos7885-uart
+ - const: samsung,exynos5433-uart
+ - items:
+ - enum:
+ - samsung,exynosautov9-uart
+ - samsung,exynosautov920-uart
+ - const: samsung,exynos850-uart
reg:
maxItems: 1
- const: uart
- const: clk_uart_baud0
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - google,gs101-uart
+ then:
+ required:
+ - samsung,uart-fifosize
+
unevaluatedProperties: false
examples:
allOf:
- $ref: serial.yaml#
+ - $ref: rs485.yaml#
properties:
compatible:
- sprd,sc9860-uart
- sprd,sc9863a-uart
- sprd,ums512-uart
+ - sprd,ums9620-uart
- const: sprd,sc9836-uart
- const: sprd,sc9836-uart
};
};
};
+
+ - |
+ system-controller@ff63c000 {
+ compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
+ reg = <0xff63c000 0x400>;
+
+ clock-controller {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ };
+
+ power-controller {
+ compatible = "amlogic,meson-axg-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+ resets = <&reset_viu>,
+ <&reset_venc>,
+ <&reset_vcbus>,
+ <&reset_vencl>,
+ <&reset_vid_lock>;
+ reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
+ clocks = <&clk_vpu>, <&clk_vapb>;
+ clock-names = "vpu", "vapb";
+ };
+
+ phy {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
+ };
+ };
- mediatek,mt8173-pwrap
- mediatek,mt8183-pwrap
- mediatek,mt8186-pwrap
- - mediatek,mt8188-pwrap
- mediatek,mt8195-pwrap
- mediatek,mt8365-pwrap
- mediatek,mt8516-pwrap
- mediatek,mt8186-pwrap
- mediatek,mt8195-pwrap
- const: syscon
+ - items:
+ - enum:
+ - mediatek,mt8188-pwrap
+ - const: mediatek,mt8195-pwrap
+ - const: syscon
reg:
minItems: 1
compatible:
enum:
- mediatek,mt8183-svs
+ - mediatek,mt8186-svs
- mediatek,mt8188-svs
- mediatek,mt8192-svs
+ - mediatek,mt8195-svs
reg:
maxItems: 1
compatible:
const: microchip,mpfs-sys-controller
+ microchip,bitstream-flash:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The SPI flash connected to the system controller's QSPI controller.
+ The system controller may retrieve FPGA bitstreams from this flash to
+ perform In-Application Programming (IAP) or during device initialisation
+ for Auto Update. The MSS and system controller have separate QSPI
+ controllers and this flash is connected to both. Software running in the
+ MSS can write bitstreams to the flash.
+
required:
- compatible
- mboxes
- qcom,sm8350-aoss-qmp
- qcom,sm8450-aoss-qmp
- qcom,sm8550-aoss-qmp
+ - qcom,sm8650-aoss-qmp
+ - qcom,x1e80100-aoss-qmp
- const: qcom,aoss-qmp
reg:
properties:
compatible:
- items:
- - enum:
- - qcom,sc8180x-pmic-glink
- - qcom,sc8280xp-pmic-glink
- - qcom,sm8350-pmic-glink
- - qcom,sm8450-pmic-glink
- - qcom,sm8550-pmic-glink
- - const: qcom,pmic-glink
+ oneOf:
+ - items:
+ - enum:
+ - qcom,sc8180x-pmic-glink
+ - qcom,sc8280xp-pmic-glink
+ - qcom,sm8350-pmic-glink
+ - qcom,sm8450-pmic-glink
+ - qcom,sm8550-pmic-glink
+ - const: qcom,pmic-glink
+ - items:
+ - enum:
+ - qcom,sm8650-pmic-glink
+ - const: qcom,sm8550-pmic-glink
+ - const: qcom,pmic-glink
'#address-cells':
const: 1
reg:
maxItems: 1
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM
+
required:
- compatible
- reg
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ const: qcom,rpmh-stats
+ then:
+ properties:
+ qcom,qmp: false
+
additionalProperties: false
examples:
- rockchip,rk3588-sys-grf
- rockchip,rk3588-pcie3-phy-grf
- rockchip,rk3588-pcie3-pipe-grf
+ - rockchip,rk3588-vo-grf
+ - rockchip,rk3588-vop-grf
- rockchip,rv1108-usbgrf
- const: syscon
- items:
compatible:
contains:
enum:
+ - google,gs101-pmu
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
- samsung,exynos4212-pmu
oneOf:
- items:
- enum:
+ - google,gs101-pmu
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
- samsung,exynos4212-pmu
- samsung,exynos850-pmu
- samsung-s5pv210-pmu
- const: syscon
+ - items:
+ - enum:
+ - samsung,exynos7885-pmu
+ - samsung,exynosautov9-pmu
+ - samsung,exynosautov920-pmu
+ - tesla,fsd-pmu
+ - const: samsung,exynos7-pmu
+ - const: syscon
- items:
- enum:
- samsung,exynos3250-pmu
compatible:
oneOf:
- items:
- - const: samsung,exynosautov9-usi
+ - enum:
+ - google,gs101-usi
+ - samsung,exynosautov9-usi
+ - samsung,exynosautov920-usi
- const: samsung,exynos850-usi
- enum:
- samsung,exynos850-usi
};
hsi2c_0: i2c@13820000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c", "samsung,exynosautov9-hsi2c";
reg = <0x13820000 0xc0>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
oneOf:
- items:
- enum:
+ - google,gs101-apm-sysreg
+ - google,gs101-peric0-sysreg
+ - google,gs101-peric1-sysreg
- samsung,exynos3-sysreg
- samsung,exynos4-sysreg
- samsung,exynos5-sysreg
+ - samsung,exynosautov920-peric0-sysreg
+ - samsung,exynosautov920-peric1-sysreg
- tesla,fsd-cam-sysreg
- tesla,fsd-fsys0-sysreg
- tesla,fsd-fsys1-sysreg
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/xilinx.yaml#
+$id: http://devicetree.org/schemas/soc/xilinx/xilinx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq Platforms
- const: xlnx,zynqmp-smk-k26
- const: xlnx,zynqmp
+ - description: AMD MicroBlaze V (QEMU)
+ items:
+ - const: qemu,mbv
+ - const: amd,mbv
+
additionalProperties: true
...
examples:
- |
- soundwire-controller@3250000 {
+ soundwire@3250000 {
#address-cells = <2>;
#size-cells = <0>;
reg = <0x3250000 0x2000>;
- const: allwinner,sun6i-a31-spdif
- const: allwinner,sun8i-h3-spdif
- const: allwinner,sun50i-h6-spdif
+ - const: allwinner,sun50i-h616-spdif
- items:
- const: allwinner,sun8i-a83t-spdif
- const: allwinner,sun8i-h3-spdif
enum:
- allwinner,sun6i-a31-spdif
- allwinner,sun8i-h3-spdif
+ - allwinner,sun50i-h6-spdif
+ - allwinner,sun50i-h616-spdif
then:
required:
contains:
enum:
- allwinner,sun8i-h3-spdif
- - allwinner,sun50i-h6-spdif
+ - allwinner,sun50i-h616-spdif
then:
properties:
properties:
mclk-fs:
$ref: simple-card.yaml#/definitions/mclk-fs
+ playback-only:
+ description: port connection used only for playback
+ $ref: /schemas/types.yaml#/definitions/flag
+ capture-only:
+ description: port connection used only for capture
+ $ref: /schemas/types.yaml#/definitions/flag
endpoint-base:
allOf:
+++ /dev/null
-Everest ES8328 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
- - compatible : Should be "everest,es8328" or "everest,es8388"
- - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
- - AVDD-supply : Regulator providing analog supply voltage 3.3V
- - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
- - IPVDD-supply : Regulator providing analog output voltage 3.3V
- - clocks : A 22.5792 or 11.2896 MHz clock
- - reg : the I2C address of the device for I2C, the chip select number for SPI
-
-Pins on the device (for linking into audio routes):
-
- * LOUT1
- * LOUT2
- * ROUT1
- * ROUT2
- * LINPUT1
- * RINPUT1
- * LINPUT2
- * RINPUT2
- * Mic Bias
-
-
-Example:
-
-codec: es8328@11 {
- compatible = "everest,es8328";
- DVDD-supply = <®_3p3v>;
- AVDD-supply = <®_3p3v>;
- PVDD-supply = <®_3p3v>;
- HPVDD-supply = <®_3p3v>;
- clocks = <&clks 169>;
- reg = <0x11>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+ Everest Audio Codec, which can be connected via I2C or SPI.
+ Pins on the device (for linking into audio routes) are
+ * LOUT1
+ * LOUT2
+ * ROUT1
+ * ROUT2
+ * LINPUT1
+ * RINPUT1
+ * LINPUT2
+ * RINPUT2
+ * Mic Bias
+
+maintainers:
+ - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+ compatible:
+ enum:
+ - everest,es8328
+ - everest,es8388
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: A 22.5792 or 11.2896 MHz clock
+
+ DVDD-supply:
+ description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+ AVDD-supply:
+ description: Regulator providing analog supply voltage 3.3V
+
+ PVDD-supply:
+ description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+ HPVDD-supply:
+ description: Regulator providing analog output voltage 3.3V
+
+required:
+ - compatible
+ - clocks
+ - DVDD-supply
+ - AVDD-supply
+ - PVDD-supply
+ - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ es8328: codec@11 {
+ compatible = "everest,es8328";
+ reg = <0x11>;
+ AVDD-supply = <®_3p3v>;
+ DVDD-supply = <®_3p3v>;
+ HPVDD-supply = <®_3p3v>;
+ PVDD-supply = <®_3p3v>;
+ clocks = <&clks 169>;
+ };
+ };
+++ /dev/null
-fsl,mqs audio CODEC
-
-Required properties:
- - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
- "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
- - clocks : A list of phandles + clock-specifiers, one for each entry in
- clock-names
- - clock-names : "mclk" - must required.
- "core" - required if compatible is "fsl,imx8qm-mqs", it
- is for register access.
- - gpr : A phandle of General Purpose Registers in IOMUX Controller.
- Required if compatible is "fsl,imx6sx-mqs".
-
-Required if compatible is "fsl,imx8qm-mqs":
- - power-domains: A phandle of PM domain provider node.
- - reg: Offset and length of the register set for the device.
-
-Example:
-
-mqs: mqs {
- compatible = "fsl,imx6sx-mqs";
- gpr = <&gpr>;
- clocks = <&clks IMX6SX_CLK_SAI1>;
- clock-names = "mclk";
- status = "disabled";
-};
-
-mqs: mqs@59850000 {
- compatible = "fsl,imx8qm-mqs";
- reg = <0x59850000 0x10000>;
- clocks = <&clk IMX8QM_AUD_MQS_IPG>,
- <&clk IMX8QM_AUD_MQS_HMCLK>;
- clock-names = "core", "mclk";
- power-domains = <&pd_mqs0>;
- status = "disabled";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+ - Shengjiu Wang <shengjiu.wang@nxp.com>
+ - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+ Medium quality sound (MQS) is used to generate medium quality audio
+ via a standard GPIO in the pinmux, allowing the user to connect
+ stereo speakers or headphones to a power amplifier without an
+ additional DAC chip.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-mqs
+ - fsl,imx8qm-mqs
+ - fsl,imx8qxp-mqs
+ - fsl,imx93-mqs
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ gpr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to the General Purpose Register (GPR) node
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-mqs
+ - fsl,imx8qxp-mqs
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Master clock
+ - description: Clock for register access
+ clock-names:
+ items:
+ - const: mclk
+ - const: core
+ required:
+ - reg
+ - power-domains
+ else:
+ properties:
+ clocks:
+ items:
+ - description: Master clock
+ clock-names:
+ items:
+ - const: mclk
+ required:
+ - gpr
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ mqs0: mqs {
+ compatible = "fsl,imx6sx-mqs";
+ gpr = <&gpr>;
+ clocks = <&clks IMX6SX_CLK_SAI1>;
+ clock-names = "mclk";
+ };
+
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ mqs1: mqs@59850000 {
+ compatible = "fsl,imx8qm-mqs";
+ reg = <0x59850000 0x10000>;
+ clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+ clock-names = "mclk", "core";
+ power-domains = <&pd IMX_SC_R_MQS_0>;
+ };
- const: txfifo
interrupts:
- maxItems: 1
+ items:
+ - description: WAKEUPMIX Audio XCVR Interrupt 1
+ - description: WAKEUPMIX Audio XCVR Interrupt 2
+ minItems: 1
clocks:
items:
- dma-names
- resets
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx93-xcvr
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
additionalProperties: false
examples:
title: Google SC7280-Herobrine ASoC sound card driver
maintainers:
- - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
- Judy Hsiao <judyhsiao@chromium.org>
description:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt2701-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Audio Front End (AFE) PCM controller for mt2701
+
+description:
+ The AFE PCM node must be a subnode of the MediaTek audsys device tree node.
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@collabora.com>
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-audio
+ - mediatek,mt7622-audio
+
+ interrupts:
+ items:
+ - description: AFE interrupt
+ - description: ASYS interrupt
+
+ interrupt-names:
+ items:
+ - const: afe
+ - const: asys
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: audio infra sys clock
+ - description: top audio mux 1
+ - description: top audio mux 2
+ - description: top audio sys a1 clock
+ - description: top audio sys a2 clock
+ - description: i2s0 source selection
+ - description: i2s1 source selection
+ - description: i2s2 source selection
+ - description: i2s3 source selection
+ - description: i2s0 source divider
+ - description: i2s1 source divider
+ - description: i2s2 source divider
+ - description: i2s3 source divider
+ - description: i2s0 master clock
+ - description: i2s1 master clock
+ - description: i2s2 master clock
+ - description: i2s3 master clock
+ - description: i2so0 hopping clock
+ - description: i2so1 hopping clock
+ - description: i2so2 hopping clock
+ - description: i2so3 hopping clock
+ - description: i2si0 hopping clock
+ - description: i2si1 hopping clock
+ - description: i2si2 hopping clock
+ - description: i2si3 hopping clock
+ - description: asrc0 output clock
+ - description: asrc1 output clock
+ - description: asrc2 output clock
+ - description: asrc3 output clock
+ - description: audio front end pd clock
+ - description: audio front end conn pd clock
+ - description: top audio a1 sys pd
+ - description: top audio a2 sys pd
+ - description: audio merge interface pd
+
+ clock-names:
+ items:
+ - const: infra_sys_audio_clk
+ - const: top_audio_mux1_sel
+ - const: top_audio_mux2_sel
+ - const: top_audio_a1sys_hp
+ - const: top_audio_a2sys_hp
+ - const: i2s0_src_sel
+ - const: i2s1_src_sel
+ - const: i2s2_src_sel
+ - const: i2s3_src_sel
+ - const: i2s0_src_div
+ - const: i2s1_src_div
+ - const: i2s2_src_div
+ - const: i2s3_src_div
+ - const: i2s0_mclk_en
+ - const: i2s1_mclk_en
+ - const: i2s2_mclk_en
+ - const: i2s3_mclk_en
+ - const: i2so0_hop_ck
+ - const: i2so1_hop_ck
+ - const: i2so2_hop_ck
+ - const: i2so3_hop_ck
+ - const: i2si0_hop_ck
+ - const: i2si1_hop_ck
+ - const: i2si2_hop_ck
+ - const: i2si3_hop_ck
+ - const: asrc0_out_ck
+ - const: asrc1_out_ck
+ - const: asrc2_out_ck
+ - const: asrc3_out_ck
+ - const: audio_afe_pd
+ - const: audio_afe_conn_pd
+ - const: audio_a1sys_pd
+ - const: audio_a2sys_pd
+ - const: audio_mrgif_pd
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - power-domains
+ - clocks
+ - clock-names
+
+additionalProperties: false
properties:
compatible:
enum:
+ - mediatek,mt8188-es8326
- mediatek,mt8188-mt6359-evb
- mediatek,mt8188-nau8825
- mediatek,mt8188-rt5682s
+++ /dev/null
-Mediatek AFE PCM controller for mt2701
-
-Required properties:
-- compatible: should be one of the following.
- - "mediatek,mt2701-audio"
- - "mediatek,mt7622-audio"
-- interrupts: should contain AFE and ASYS interrupts
-- interrupt-names: should be "afe" and "asys"
-- power-domains: should define the power domain
-- clocks: Must contain an entry for each entry in clock-names
- See ../clocks/clock-bindings.txt for details
-- clock-names: should have these clock names:
- "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
- "top_audio_a1sys_hp",
- "top_audio_a2sys_hp",
- "i2s0_src_sel",
- "i2s1_src_sel",
- "i2s2_src_sel",
- "i2s3_src_sel",
- "i2s0_src_div",
- "i2s1_src_div",
- "i2s2_src_div",
- "i2s3_src_div",
- "i2s0_mclk_en",
- "i2s1_mclk_en",
- "i2s2_mclk_en",
- "i2s3_mclk_en",
- "i2so0_hop_ck",
- "i2so1_hop_ck",
- "i2so2_hop_ck",
- "i2so3_hop_ck",
- "i2si0_hop_ck",
- "i2si1_hop_ck",
- "i2si2_hop_ck",
- "i2si3_hop_ck",
- "asrc0_out_ck",
- "asrc1_out_ck",
- "asrc2_out_ck",
- "asrc3_out_ck",
- "audio_afe_pd",
- "audio_afe_conn_pd",
- "audio_a1sys_pd",
- "audio_a2sys_pd",
- "audio_mrgif_pd";
-- assigned-clocks: list of input clocks and dividers for the audio system.
- See ../clocks/clock-bindings.txt for details.
-- assigned-clocks-parents: parent of input clocks of assigned clocks.
-- assigned-clock-rates: list of clock frequencies of assigned clocks.
-
-Must be a subnode of MediaTek audsys device tree node.
-See ../arm/mediatek/mediatek,audsys.txt for details about the parent node.
-
-Example:
-
- audsys: audio-subsystem@11220000 {
- compatible = "mediatek,mt2701-audsys", "syscon";
- ...
-
- afe: audio-controller {
- compatible = "mediatek,mt2701-audio";
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
- clocks = <&infracfg CLK_INFRA_AUDIO>,
- <&topckgen CLK_TOP_AUD_MUX1_SEL>,
- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
- <&topckgen CLK_TOP_AUD_48K_TIMING>,
- <&topckgen CLK_TOP_AUD_44K_TIMING>,
- <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
- <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
- <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
- <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
- <&audsys CLK_AUD_I2SO1>,
- <&audsys CLK_AUD_I2SO2>,
- <&audsys CLK_AUD_I2SO3>,
- <&audsys CLK_AUD_I2SO4>,
- <&audsys CLK_AUD_I2SIN1>,
- <&audsys CLK_AUD_I2SIN2>,
- <&audsys CLK_AUD_I2SIN3>,
- <&audsys CLK_AUD_I2SIN4>,
- <&audsys CLK_AUD_ASRCO1>,
- <&audsys CLK_AUD_ASRCO2>,
- <&audsys CLK_AUD_ASRCO3>,
- <&audsys CLK_AUD_ASRCO4>,
- <&audsys CLK_AUD_AFE>,
- <&audsys CLK_AUD_AFE_CONN>,
- <&audsys CLK_AUD_A1SYS>,
- <&audsys CLK_AUD_A2SYS>,
- <&audsys CLK_AUD_AFE_MRGIF>;
-
- clock-names = "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
- "top_audio_a1sys_hp",
- "top_audio_a2sys_hp",
- "i2s0_src_sel",
- "i2s1_src_sel",
- "i2s2_src_sel",
- "i2s3_src_sel",
- "i2s0_src_div",
- "i2s1_src_div",
- "i2s2_src_div",
- "i2s3_src_div",
- "i2s0_mclk_en",
- "i2s1_mclk_en",
- "i2s2_mclk_en",
- "i2s3_mclk_en",
- "i2so0_hop_ck",
- "i2so1_hop_ck",
- "i2so2_hop_ck",
- "i2so3_hop_ck",
- "i2si0_hop_ck",
- "i2si1_hop_ck",
- "i2si2_hop_ck",
- "i2si3_hop_ck",
- "asrc0_out_ck",
- "asrc1_out_ck",
- "asrc2_out_ck",
- "asrc3_out_ck",
- "audio_afe_pd",
- "audio_afe_conn_pd",
- "audio_a1sys_pd",
- "audio_a2sys_pd",
- "audio_mrgif_pd";
-
- assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
- <&topckgen CLK_TOP_AUD_MUX2_SEL>,
- <&topckgen CLK_TOP_AUD_MUX1_DIV>,
- <&topckgen CLK_TOP_AUD_MUX2_DIV>;
- assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
- <&topckgen CLK_TOP_AUD2PLL_90M>;
- assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
- };
- };
$ref: /schemas/types.yaml#/definitions/uint32
default: 3072000
+ nuvoton,dmic-slew-rate:
+ description: The range 0 to 7 represents the speed of DMIC slew rate.
+ The lowest value 0 means the slowest rate and the highest value
+ 7 means the fastest rate.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 7
+ default: 0
+
nuvoton,left-input-single-end:
description: Enable left input with single-ended settings if set.
For the headset mic application, the single-ended control is
nuvoton,jack-insert-debounce = <7>;
nuvoton,jack-eject-debounce = <0>;
nuvoton,dmic-clk-threshold = <3072000>;
+ nuvoton,dmic-slew-rate = <0>;
#sound-dai-cells = <0>;
};
};
#include <dt-bindings/clock/tegra30-car.h>
#include <dt-bindings/soc/tegra-pmc.h>
sound {
- compatible = "lge,tegra-audio-max98089-p895",
+ compatible = "lg,tegra-audio-max98089-p895",
"nvidia,tegra-audio-max98089";
nvidia,model = "LG Optimus Vu MAX98089";
properties:
compatible:
- enum:
- - qcom,sc7280-lpass-rx-macro
- - qcom,sm8250-lpass-rx-macro
- - qcom,sm8450-lpass-rx-macro
- - qcom,sm8550-lpass-rx-macro
- - qcom,sc8280xp-lpass-rx-macro
+ oneOf:
+ - enum:
+ - qcom,sc7280-lpass-rx-macro
+ - qcom,sm8250-lpass-rx-macro
+ - qcom,sm8450-lpass-rx-macro
+ - qcom,sm8550-lpass-rx-macro
+ - qcom,sc8280xp-lpass-rx-macro
+ - items:
+ - enum:
+ - qcom,sm8650-lpass-rx-macro
+ - qcom,x1e80100-lpass-rx-macro
+ - const: qcom,sm8550-lpass-rx-macro
reg:
maxItems: 1
- if:
properties:
compatible:
- enum:
- - qcom,sm8550-lpass-rx-macro
+ contains:
+ enum:
+ - qcom,sm8550-lpass-rx-macro
then:
properties:
clocks:
properties:
compatible:
- enum:
- - qcom,sc7280-lpass-tx-macro
- - qcom,sm6115-lpass-tx-macro
- - qcom,sm8250-lpass-tx-macro
- - qcom,sm8450-lpass-tx-macro
- - qcom,sm8550-lpass-tx-macro
- - qcom,sc8280xp-lpass-tx-macro
+ oneOf:
+ - enum:
+ - qcom,sc7280-lpass-tx-macro
+ - qcom,sm6115-lpass-tx-macro
+ - qcom,sm8250-lpass-tx-macro
+ - qcom,sm8450-lpass-tx-macro
+ - qcom,sm8550-lpass-tx-macro
+ - qcom,sc8280xp-lpass-tx-macro
+ - items:
+ - enum:
+ - qcom,sm8650-lpass-tx-macro
+ - qcom,x1e80100-lpass-tx-macro
+ - const: qcom,sm8550-lpass-tx-macro
reg:
maxItems: 1
- if:
properties:
compatible:
- enum:
- - qcom,sm8550-lpass-tx-macro
+ contains:
+ enum:
+ - qcom,sm8550-lpass-tx-macro
then:
properties:
clocks:
properties:
compatible:
- enum:
- - qcom,sc7280-lpass-va-macro
- - qcom,sm8250-lpass-va-macro
- - qcom,sm8450-lpass-va-macro
- - qcom,sm8550-lpass-va-macro
- - qcom,sc8280xp-lpass-va-macro
+ oneOf:
+ - enum:
+ - qcom,sc7280-lpass-va-macro
+ - qcom,sm8250-lpass-va-macro
+ - qcom,sm8450-lpass-va-macro
+ - qcom,sm8550-lpass-va-macro
+ - qcom,sc8280xp-lpass-va-macro
+ - items:
+ - enum:
+ - qcom,sm8650-lpass-va-macro
+ - qcom,x1e80100-lpass-va-macro
+ - const: qcom,sm8550-lpass-va-macro
reg:
maxItems: 1
properties:
compatible:
- enum:
- - qcom,sc7280-lpass-wsa-macro
- - qcom,sm8250-lpass-wsa-macro
- - qcom,sm8450-lpass-wsa-macro
- - qcom,sm8550-lpass-wsa-macro
- - qcom,sc8280xp-lpass-wsa-macro
+ oneOf:
+ - enum:
+ - qcom,sc7280-lpass-wsa-macro
+ - qcom,sm8250-lpass-wsa-macro
+ - qcom,sm8450-lpass-wsa-macro
+ - qcom,sm8550-lpass-wsa-macro
+ - qcom,sc8280xp-lpass-wsa-macro
+ - items:
+ - enum:
+ - qcom,sm8650-lpass-wsa-macro
+ - qcom,x1e80100-lpass-wsa-macro
+ - const: qcom,sm8550-lpass-wsa-macro
reg:
maxItems: 1
- if:
properties:
compatible:
- enum:
- - qcom,sm8550-lpass-wsa-macro
+ contains:
+ enum:
+ - qcom,sm8550-lpass-wsa-macro
then:
properties:
clocks:
- lenovo,yoga-c630-sndcard
- qcom,db845c-sndcard
- const: qcom,sdm845-sndcard
+ - items:
+ - enum:
+ - qcom,sm8550-sndcard
+ - qcom,sm8650-sndcard
+ - const: qcom,sm8450-sndcard
- enum:
- qcom,apq8016-sbc-sndcard
- qcom,msm8916-qdsp6-sndcard
- qcom,sdm845-sndcard
- qcom,sm8250-sndcard
- qcom,sm8450-sndcard
+ - qcom,x1e80100-sndcard
audio-routing:
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
- |
codec@1,0{
compatible = "slim217,250";
- reg = <1 0>;
+ reg = <1 0>;
reset-gpios = <&tlmm 64 0>;
- slim-ifc-dev = <&wcd9340_ifd>;
+ slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
interrupt-parent = <&tlmm>;
interrupts = <54 4>;
reg = <0x03210000 0x2000>;
wcd938x_rx: codec@0,4 {
compatible = "sdw20217010d00";
- reg = <0 4>;
+ reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
reg = <0x03230000 0x2000>;
wcd938x_tx: codec@0,3 {
compatible = "sdw20217010d00";
- reg = <0 3>;
+ reg = <0 3>;
qcom,tx-port-mapping = <2 3 4 5>;
};
};
reg = <0x03210000 0x2000>;
wcd938x_rx: codec@0,4 {
compatible = "sdw20217010d00";
- reg = <0 4>;
+ reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
reg = <0x03230000 0x2000>;
wcd938x_tx: codec@0,3 {
compatible = "sdw20217010d00";
- reg = <0 3>;
+ reg = <0 3>;
qcom,tx-port-mapping = <2 3 4 5>;
};
};
- |
#include <dt-bindings/gpio/gpio.h>
- soundwire-controller@3250000 {
+ soundwire@3250000 {
#address-cells = <2>;
#size-cells = <0>;
reg = <0x3250000 0x2000>;
- |
#include <dt-bindings/gpio/gpio.h>
- soundwire-controller {
+ soundwire {
#address-cells = <2>;
#size-cells = <0>;
maintainers:
- Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
-definitions:
- port-def:
- $ref: audio-graph-port.yaml#/definitions/port-base
- unevaluatedProperties: false
- patternProperties:
- "^endpoint(@[0-9a-f]+)?":
- $ref: audio-graph-port.yaml#/definitions/endpoint-base
- properties:
- playback:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- capture:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- unevaluatedProperties: false
-
properties:
compatible:
# ports is below
port:
- $ref: "#/definitions/port-def"
+ $ref: audio-graph-port.yaml#/definitions/port-base
+ unevaluatedProperties: false
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ $ref: audio-graph-port.yaml#/definitions/endpoint-base
+ properties:
+ playback:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ capture:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ unevaluatedProperties: false
rcar_sound,dvc:
description: DVC subnode.
unevaluatedProperties: false
patternProperties:
'^port(@[0-9a-f]+)?$':
- $ref: "#/definitions/port-def"
+ $ref: "#/properties/port"
required:
- compatible
rcar_sound,dai {
dai0 {
playback = <&ssi5>, <&src5>;
- capture = <&ssi6>;
+ capture = <&ssi6>;
};
dai1 {
playback = <&ssi3>;
};
dai2 {
- capture = <&ssi4>;
+ capture = <&ssi4>;
};
dai3 {
playback = <&ssi7>;
};
dai4 {
- capture = <&ssi8>;
+ capture = <&ssi8>;
};
};
frame-master = <&rsnd_endpoint0>;
playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
};
compatible:
items:
- enum:
- - renesas,r9a07g043-ssi # RZ/G2UL
+ - renesas,r9a07g043-ssi # RZ/G2UL and RZ/Five
- renesas,r9a07g044-ssi # RZ/G2{L,LC}
- renesas,r9a07g054-ssi # RZ/V2L
- const: renesas,rz-ssi
frequencies supported by Exynos7 I2S and 7.1 channel TDM support
for playback and capture TDM (Time division multiplexing) to allow
transfer of multiple channel audio data on single data line.
- enum:
- - samsung,s3c6410-i2s
- - samsung,s5pv210-i2s
- - samsung,exynos5420-i2s
- - samsung,exynos7-i2s
- - samsung,exynos7-i2s1
- - tesla,fsd-i2s
+ oneOf:
+ - enum:
+ - samsung,s3c6410-i2s
+ - samsung,s5pv210-i2s
+ - samsung,exynos5420-i2s
+ - samsung,exynos7-i2s
+ - samsung,exynos7-i2s1
+ - tesla,fsd-i2s
+ - items:
+ - enum:
+ - samsung,exynos5433-i2s
+ - const: samsung,exynos7-i2s
'#address-cells':
const: 1
pair of strings, the first being the connection's sink, the second
being the connection's source.
+ ignore-suspend-widgets:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of audio sound widgets which are marked ignoring system suspend.
+ Paths between these endpoints are still active over suspend of the main
+ application processor that the current operating system is running.
+
model:
$ref: /schemas/types.yaml#/definitions/string
description: User specified audio sound card name
Specifications about the audio amplifier can be found at:
https://www.ti.com/lit/gpn/tas2562
- https://www.ti.com/lit/gpn/tas2563
https://www.ti.com/lit/gpn/tas2564
https://www.ti.com/lit/gpn/tas2110
compatible:
enum:
- ti,tas2562
- - ti,tas2563
- ti,tas2564
- ti,tas2110
$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Texas Instruments TAS2781 SmartAMP
+title: Texas Instruments TAS2563/TAS2781 SmartAMP
maintainers:
- Shenghao Ding <shenghao-ding@ti.com>
-description:
- The TAS2781 is a mono, digital input Class-D audio amplifier
- optimized for efficiently driving high peak power into small
- loudspeakers. An integrated on-chip DSP supports Texas Instruments
- Smart Amp speaker protection algorithm. The integrated speaker
- voltage and current sense provides for real time
+description: |
+ The TAS2563/TAS2781 is a mono, digital input Class-D audio
+ amplifier optimized for efficiently driving high peak power into
+ small loudspeakers. An integrated on-chip DSP supports Texas
+ Instruments Smart Amp speaker protection algorithm. The
+ integrated speaker voltage and current sense provides for real time
monitoring of loudspeaker behavior.
-allOf:
- - $ref: dai-common.yaml#
+ Specifications about the audio amplifier can be found at:
+ https://www.ti.com/lit/gpn/tas2563
+ https://www.ti.com/lit/gpn/tas2781
properties:
compatible:
- enum:
- - ti,tas2781
+ description: |
+ ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated
+ DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM.
+
+ ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker
+ Protection and Audio Processing, 16/20/24/32bit stereo I2S or
+ multichannel TDM.
+ oneOf:
+ - items:
+ - enum:
+ - ti,tas2563
+ - const: ti,tas2781
+ - enum:
+ - ti,tas2781
reg:
description:
- I2C address, in multiple tas2781s case, all the i2c address
+ I2C address, in multiple-AMP case, all the i2c address
aggregate as one Audio Device to support multiple audio slots.
maxItems: 8
minItems: 1
- items:
- minimum: 0x38
- maximum: 0x3f
reset-gpios:
maxItems: 1
- compatible
- reg
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tas2563
+ then:
+ properties:
+ reg:
+ description:
+ I2C address, in multiple-AMP case, all the i2c address
+ aggregate as one Audio Device to support multiple audio slots.
+ maxItems: 4
+ minItems: 1
+ items:
+ minimum: 0x4c
+ maximum: 0x4f
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tas2781
+ then:
+ properties:
+ reg:
+ description:
+ I2C address, in multiple-AMP case, all the i2c address
+ aggregate as one Audio Device to support multiple audio slots.
+ maxItems: 8
+ minItems: 1
+ items:
+ minimum: 0x38
+ maximum: 0x3f
+
additionalProperties: false
examples:
ldoin-supply = <®_3v3>;
clocks = <&clks 201>;
clock-names = "mclk";
- aic32x4-gpio-func= <
+ aic32x4-gpio-func = <
0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
+++ /dev/null
-Analog Devices AXI SPI Engine controller Device Tree Bindings
-
-Required properties:
-- compatible : Must be "adi,axi-spi-engine-1.00.a""
-- reg : Physical base address and size of the register map.
-- interrupts : Property with a value describing the interrupt
- number.
-- clock-names : List of input clock names - "s_axi_aclk", "spi_clk"
-- clocks : Clock phandles and specifiers (See clock bindings for
- details on clock-names and clocks).
-- #address-cells : Must be <1>
-- #size-cells : Must be <0>
-
-Optional subnodes:
- Subnodes are use to represent the SPI slave devices connected to the SPI
- master. They follow the generic SPI bindings as outlined in spi-bus.txt.
-
-Example:
-
- spi@@44a00000 {
- compatible = "adi,axi-spi-engine-1.00.a";
- reg = <0x44a00000 0x1000>;
- interrupts = <0 56 4>;
- clocks = <&clkc 15 &clkc 15>;
- clock-names = "s_axi_aclk", "spi_clk";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* SPI devices */
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI SPI Engine Controller
+
+description: |
+ The AXI SPI Engine controller is part of the SPI Engine framework[1] and
+ allows memory mapped access to the SPI Engine control bus. This allows it
+ to be used as a general purpose software driven SPI controller as well as
+ some optional advanced acceleration and offloading capabilities.
+
+ [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine
+
+maintainers:
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Nuno Sá <nuno.sa@analog.com>
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ const: adi,axi-spi-engine-1.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The AXI interconnect clock.
+ - description: The SPI controller clock.
+
+ clock-names:
+ items:
+ - const: s_axi_aclk
+ - const: spi_clk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi@44a00000 {
+ compatible = "adi,axi-spi-engine-1.00.a";
+ reg = <0x44a00000 0x1000>;
+ interrupts = <0 56 4>;
+ clocks = <&clkc 15>, <&clkc 15>;
+ clock-names = "s_axi_aclk", "spi_clk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* SPI devices */
+ };
- enum:
- renesas,rspi-r7s72100 # RZ/A1H
- renesas,rspi-r7s9210 # RZ/A2
- - renesas,r9a07g043-rspi # RZ/G2UL
+ - renesas,r9a07g043-rspi # RZ/G2UL and RZ/Five
- renesas,r9a07g044-rspi # RZ/G2{L,LC}
- renesas,r9a07g054-rspi # RZ/V2L
- const: renesas,rspi-rz
- const: snps,dw-apb-ssi
- description: Intel Keem Bay SPI Controller
const: intel,keembay-ssi
- - description: Intel Thunder Bay SPI Controller
- const: intel,thunderbay-ssi
- description: Intel Mount Evans Integrated Management Complex SPI Controller
const: intel,mountevans-imc-ssi
- description: AMD Pensando Elba SoC SPI Controller
compatible:
enum:
- st,stm32f4-spi
+ - st,stm32f7-spi
- st,stm32h7-spi
+ - st,stm32mp25-spi
reg:
maxItems: 1
- allwinner,sun8i-a83t-ths
- allwinner,sun8i-h3-ths
- allwinner,sun8i-r40-ths
+ - allwinner,sun20i-d1-ths
- allwinner,sun50i-a64-ths
- allwinner,sun50i-a100-ths
- allwinner,sun50i-h5-ths
compatible:
contains:
enum:
+ - allwinner,sun20i-d1-ths
- allwinner,sun50i-a100-ths
- allwinner,sun50i-h6-ths
properties:
compatible:
contains:
- const: allwinner,sun8i-h3-ths
+ enum:
+ - allwinner,sun8i-h3-ths
+ - allwinner,sun20i-d1-ths
then:
properties:
enum:
- allwinner,sun8i-h3-ths
- allwinner,sun8i-r40-ths
+ - allwinner,sun20i-d1-ths
- allwinner,sun50i-a64-ths
- allwinner,sun50i-a100-ths
- allwinner,sun50i-h5-ths
- zhanghongchen <zhanghongchen@loongson.cn>
- Yinbo Zhu <zhuyinbo@loongson.cn>
+allOf:
+ - $ref: /schemas/thermal/thermal-sensor.yaml#
+
properties:
compatible:
oneOf:
interrupts:
maxItems: 1
+ '#thermal-sensor-cells':
+ const: 1
+
required:
- compatible
- reg
- interrupts
+ - '#thermal-sensor-cells'
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
reg = <0x1fe01500 0x30>;
interrupt-parent = <&liointc0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek thermal controller for on-SoC temperatures
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+ This device does not have its own ADC, instead it directly controls the AUXADC
+ via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it
+ controls a mux in the apmixedsys register space via AHB bus accesses, so a
+ phandle to the APMIXEDSYS is also needed.
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-thermal
+ - mediatek,mt2712-thermal
+ - mediatek,mt7622-thermal
+ - mediatek,mt7981-thermal
+ - mediatek,mt7986-thermal
+ - mediatek,mt8173-thermal
+ - mediatek,mt8183-thermal
+ - mediatek,mt8365-thermal
+ - mediatek,mt8516-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main clock needed for register access
+ - description: The AUXADC clock
+
+ clock-names:
+ items:
+ - const: therm
+ - const: auxadc
+
+ mediatek,auxadc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the AUXADC which the thermal controller uses
+
+ mediatek,apmixedsys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the APMIXEDSYS controller
+
+ resets:
+ description: Reset controller controlling the thermal controller
+
+ nvmem-cells:
+ items:
+ - description:
+ NVMEM cell with EEPROMA phandle to the calibration data provided by an
+ NVMEM device. If unspecified default values shall be used.
+
+ nvmem-cell-names:
+ items:
+ - const: calibration-data
+
+required:
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - mediatek,auxadc
+ - mediatek,apmixedsys
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/reset/mt8173-resets.h>
+
+ thermal@1100b000 {
+ compatible = "mediatek,mt8173-thermal";
+ reg = <0x1100b000 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration_data>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ };
+++ /dev/null
-* Mediatek Thermal
-
-This describes the device tree binding for the Mediatek thermal controller
-which measures the on-SoC temperatures. This device does not have its own ADC,
-instead it directly controls the AUXADC via AHB bus accesses. For this reason
-this device needs phandles to the AUXADC. Also it controls a mux in the
-apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
-is also needed.
-
-Required properties:
-- compatible:
- - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
- - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
- - "mediatek,mt7622-thermal" : For MT7622 SoC
- - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
- - "mediatek,mt7986-thermal" : For MT7986 SoC
- - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
- - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
- - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
-- reg: Address range of the thermal controller
-- interrupts: IRQ for the thermal controller
-- clocks, clock-names: Clocks needed for the thermal controller. required
- clocks are:
- "therm": Main clock needed for register access
- "auxadc": The AUXADC clock
-- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
-- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- resets: Reference to the reset controller controlling the thermal controller.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
- unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
-
-Example:
-
- thermal: thermal@1100b000 {
- #thermal-sensor-cells = <1>;
- compatible = "mediatek,mt8173-thermal";
- reg = <0 0x1100b000 0 0x1000>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
- clock-names = "therm", "auxadc";
- resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
- reset-names = "therm";
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
- nvmem-cells = <&thermal_calibration_data>;
- nvmem-cell-names = "calibration-data";
- };
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spmi_bus {
+
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
+
pm8998_adc: adc@3100 {
- reg = <0x3100>;
compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
};
};
- pm8998_adc_tm: adc-tm@3400 {
+ adc-tm@3400 {
compatible = "qcom,spmi-adc-tm-hc";
reg = <0x3400>;
interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spmi_bus {
+
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
+
pm8150b_adc: adc@3100 {
- reg = <0x3100>;
compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
};
};
- pm8150b_adc_tm: adc-tm@3500 {
+ adc-tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spmi_bus {
+
+ pmic {
#address-cells = <1>;
#size-cells = <0>;
+
pmk8350_vadc: adc@3100 {
- reg = <0x3100>;
compatible = "qcom,spmi-adc7";
+ reg = <0x3100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
};
};
- pmk8350_adc_tm: adc-tm@3400 {
+ adc-tm@3400 {
compatible = "qcom,spmi-adc-tm5-gen2";
reg = <0x3400>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
- qcom,sm8350-tsens
- qcom,sm8450-tsens
- qcom,sm8550-tsens
+ - qcom,sm8650-tsens
- const: qcom,tsens-v2
- description: v2 of TSENS with combined interrupt
framework and assumes that the thermal sensors in this zone
support interrupts.
+ critical-action:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ The action the OS should perform after the critical temperature is reached.
+ By default the system will shutdown as a safe action to prevent damage
+ to the hardware, if the property is not set.
+ The shutdown action should be always the default and preferred one.
+ Choose 'reboot' with care, as the hardware may be in thermal stress,
+ thus leading to infinite reboots that may cause damage to the hardware.
+ Make sure the firmware/bootloader will act as the last resort and take
+ over the thermal control.
+
+ enum:
+ - shutdown
+ - reboot
+
thermal-sensors:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
- sifive,fu540-c000-clint # SiFive FU540
- starfive,jh7100-clint # StarFive JH7100
- starfive,jh7110-clint # StarFive JH7110
+ - starfive,jh8100-clint # StarFive JH8100
- const: sifive,clint0 # SiFive CLINT v0 IP block
- items:
- enum:
- allwinner,sun20i-d1-clint
- sophgo,cv1800b-clint
+ - sophgo,cv1812h-clint
- thead,th1520-clint
- const: thead,c900-clint
- items:
- const: thead,c900-aclint-mtimer
reg:
- maxItems: 1
+ items:
+ - description: MTIMECMP Registers
+
+ reg-names:
+ items:
+ - const: mtimecmp
interrupts-extended:
minItems: 1
required:
- compatible
- reg
+ - reg-names
- interrupts-extended
examples:
<&cpu3intc 7>,
<&cpu4intc 7>;
reg = <0xac000000 0x00010000>;
+ reg-names = "mtimecmp";
};
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Security Chip H1 (running Cr50 firmware)
+
+maintainers:
+ - Andrey Pronin <apronin@chromium.org>
+
+description: |
+ Google has designed a family of security chips called "Titan".
+ One member is the H1 built into Chromebooks and running Cr50 firmware:
+ https://www.osfc.io/2018/talks/google-secure-microcontroller-and-ccd-closed-case-debugging/
+
+ The chip provides several functions, including TPM 2.0 like functionality.
+ It communicates over SPI or I²C using the FIFO protocol described in the
+ TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP), sec 6:
+ https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+properties:
+ compatible:
+ const: google,cr50
+
+allOf:
+ - $ref: tpm-common.yaml#
+
+anyOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: tcg,tpm-tis-i2c.yaml#/properties/reg
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@0 {
+ reg = <0>;
+ compatible = "google,cr50";
+ spi-max-frequency = <800000>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@50 {
+ compatible = "google,cr50";
+ reg = <0x50>;
+ interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cr50_int>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/ibm,vtpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Virtual Trusted Platform Module (vTPM)
+
+maintainers:
+ - Nayna Jain <nayna@linux.ibm.com>
+
+description: |
+ Virtual TPM is used on IBM POWER7+ and POWER8 systems running POWERVM.
+ It is supported through the adjunct partition with firmware release 740
+ or higher. With vTPM support, each lpar is able to have its own vTPM
+ without the physical TPM hardware. The TPM functionality is provided by
+ communicating with the vTPM adjunct partition through Hypervisor calls
+ (Hcalls) and Command/Response Queue (CRQ) commands.
+
+properties:
+ compatible:
+ enum:
+ - IBM,vtpm
+ - IBM,vtpm20
+
+ device_type:
+ description:
+ type of virtual device
+ enum:
+ - IBM,vtpm
+ - IBM,vtpm20
+
+ reg:
+ maxItems: 1
+
+ 'ibm,#dma-address-cells':
+ description:
+ number of cells that are used to encode the physical address field of
+ dma-window properties
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ 'ibm,#dma-size-cells':
+ description:
+ number of cells that are used to encode the size field of
+ dma-window properties
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ ibm,my-dma-window:
+ description:
+ DMA window associated with this virtual I/O Adapter
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 5
+ maxItems: 5
+
+ ibm,my-drc-index:
+ description:
+ integer index for the connector between the device and its parent;
+ present only if Dynamic Reconfiguration (DR) Connector is enabled
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ibm,loc-code:
+ description:
+ unique and persistent location code associated with this virtual
+ I/O Adapter
+ $ref: /schemas/types.yaml#/definitions/string
+
+required:
+ - compatible
+ - device_type
+ - reg
+ - interrupts
+ - ibm,#dma-address-cells
+ - ibm,#dma-size-cells
+ - ibm,my-dma-window
+ - ibm,my-drc-index
+ - ibm,loc-code
+ - linux,sml-base
+ - linux,sml-size
+
+allOf:
+ - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@30000003 {
+ compatible = "IBM,vtpm";
+ device_type = "IBM,vtpm";
+ reg = <0x30000003>;
+ interrupts = <0xa0003 0x0>;
+ ibm,#dma-address-cells = <0x2>;
+ ibm,#dma-size-cells = <0x2>;
+ ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
+ ibm,my-drc-index = <0x30000003>;
+ ibm,loc-code = "U8286.41A.10082DV-V3-C3";
+ linux,sml-base = <0xc60e 0x0>;
+ linux,sml-size = <0xbce10200>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/microsoft,ftpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft firmware-based Trusted Platform Module (fTPM)
+
+maintainers:
+ - Thirupathaiah Annapureddy <thiruan@microsoft.com>
+ - Sasha Levin <sashal@kernel.org>
+
+description: |
+ Commodity CPU architectures, such as ARM and Intel CPUs, have started to
+ offer trusted computing features in their CPUs aimed at displacing dedicated
+ trusted hardware. Unfortunately, these CPU architectures raise serious
+ challenges to building trusted systems because they omit providing secure
+ resources outside the CPU perimeter.
+
+ Microsoft's firmware-based TPM 2.0 (fTPM) leverages ARM TrustZone to overcome
+ these challenges and provide software with security guarantees similar to
+ those of dedicated trusted hardware.
+
+ https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/
+ https://github.com/Microsoft/ms-tpm-20-ref/tree/main/Samples/ARM32-FirmwareTPM
+
+properties:
+ compatible:
+ const: microsoft,ftpm
+
+required:
+ - compatible
+ - linux,sml-base
+ - linux,sml-size
+
+allOf:
+ - $ref: tpm-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ tpm {
+ compatible = "microsoft,ftpm";
+ linux,sml-base = <0x0 0xc0000000>;
+ linux,sml-size = <0x10000>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I²C-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+ - Lukas Wunner <lukas@wunner.de>
+
+description: |
+ The Trusted Computing Group (TCG) has defined a multi-vendor standard
+ for accessing a TPM chip. It can be transported over various buses,
+ one of them being I²C. The standard is named:
+ TCG PC Client Specific TPM Interface Specification (TIS)
+ https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+ The I²C interface was not originally part of the standard, but added
+ in 2017 with a separate document:
+ TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP)
+ https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
+
+ Recent TPM 2.0 chips conform to this generic interface, others use a
+ vendor-specific I²C interface.
+
+properties:
+ compatible:
+ oneOf:
+ - description: Generic TPM 2.0 chips conforming to TCG PTP interface
+ items:
+ - enum:
+ - infineon,slb9673
+ - nuvoton,npct75x
+ - const: tcg,tpm-tis-i2c
+
+ - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface
+ items:
+ - enum:
+ - atmel,at97sc3204t # TPM 1.2
+ - infineon,slb9635tt # TPM 1.2 (maximum 100 kHz)
+ - infineon,slb9645tt # TPM 1.2 (maximum 400 kHz)
+ - infineon,tpm_i2c_infineon # TPM 1.2
+ - nuvoton,npct501 # TPM 1.2
+ - nuvoton,npct601 # TPM 2.0
+ - st,st33zp24-i2c # TPM 2.0
+ - winbond,wpct301 # TPM 1.2
+
+ reg:
+ description: address of TPM on the I²C bus
+
+allOf:
+ - $ref: tpm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@57 {
+ label = "tpm";
+ compatible = "nuvoton,npct601";
+ reg = <0x57>;
+ linux,sml-base = <0x7f 0xfd450000>;
+ linux,sml-size = <0x10000>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@13 {
+ reg = <0x13>;
+ compatible = "st,st33zp24-i2c";
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMIO-accessed Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+ - Lukas Wunner <lukas@wunner.de>
+
+description: |
+ The Trusted Computing Group (TCG) has defined a multi-vendor standard
+ for accessing a TPM chip. It can be transported over various buses,
+ one of them being LPC (via MMIO). The standard is named:
+ TCG PC Client Specific TPM Interface Specification (TIS)
+ https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - at97sc3201
+ - atmel,at97sc3204
+ - socionext,synquacer-tpm-mmio
+ - const: tcg,tpm-tis-mmio
+
+ reg:
+ description:
+ location and length of the MMIO registers, length should be
+ at least 0x5000 bytes
+
+allOf:
+ - $ref: tpm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ tpm@90000 {
+ compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
+ reg = <0x90000 0x5000>;
+ interrupt-parent = <&EIC0>;
+ interrupts = <1 2>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-attached Trusted Platform Module conforming to TCG TIS specification
+
+maintainers:
+ - Lukas Wunner <lukas@wunner.de>
+
+description: |
+ The Trusted Computing Group (TCG) has defined a multi-vendor standard
+ for accessing a TPM chip. It can be transported over various buses,
+ one of them being SPI. The standard is named:
+ TCG PC Client Specific TPM Interface Specification (TIS)
+ https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - infineon,slb9670
+ - st,st33htpm-spi
+ - st,st33zp24-spi
+ - const: tcg,tpm_tis-spi
+
+allOf:
+ - $ref: tpm-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,st33zp24-spi
+ then:
+ properties:
+ spi-max-frequency:
+ maximum: 10000000
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@0 {
+ reg = <0>;
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tpm@0 {
+ reg = <0>;
+ compatible = "st,st33zp24-spi", "tcg,tpm_tis-spi";
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trusted Platform Module common properties
+
+maintainers:
+ - Lukas Wunner <lukas@wunner.de>
+
+properties:
+ $nodename:
+ pattern: '^tpm(@[0-9a-f]+)?$'
+
+ interrupts:
+ description: indicates command completion
+ maxItems: 1
+
+ label:
+ description: human readable string describing the device, e.g. "tpm"
+
+ linux,sml-base:
+ description:
+ base address of reserved memory allocated for firmware event log
+ $ref: /schemas/types.yaml#/definitions/uint64
+
+ linux,sml-size:
+ description:
+ size of reserved memory allocated for firmware event log
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ memory-region:
+ description: reserved memory allocated for firmware event log
+ maxItems: 1
+
+ powered-while-suspended:
+ description:
+ present when the TPM is left powered on between suspend and resume
+ (makes the suspend/resume callbacks do nothing)
+ type: boolean
+
+ resets:
+ description: Reset controller to reset the TPM
+ maxItems: 1
+
+ reset-gpios:
+ description: Output GPIO pin to reset the TPM
+ maxItems: 1
+
+# must always have both linux,sml-base and linux,sml-size
+dependentRequired:
+ linux,sml-base: ['linux,sml-size']
+ linux,sml-size: ['linux,sml-base']
+
+# must only have either memory-region or linux,sml-base
+# as well as either resets or reset-gpios
+dependentSchemas:
+ memory-region:
+ properties:
+ linux,sml-base: false
+ linux,sml-base:
+ properties:
+ memory-region: false
+ resets:
+ properties:
+ reset-gpios: false
+ reset-gpios:
+ properties:
+ resets: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ pattern: '^st,st33zp24'
+ then:
+ properties:
+ lpcpd-gpios:
+ description:
+ Output GPIO pin used for ST33ZP24 power management of D1/D2 state.
+ If set, power must be present when the platform is going into
+ sleep/hibernate mode.
+ maxItems: 1
+
+additionalProperties: true
- ams,iaq-core
# i2c serial eeprom (24cxx)
- at,24c08
- # i2c trusted platform module (TPM)
- - atmel,at97sc3204t
# ATSHA204 - i2c h/w symmetric crypto module
- atmel,atsha204
# ATSHA204A - i2c h/w symmetric crypto module
- fsl,mpl3115
# MPR121: Proximity Capacitive Touch Sensor Controller
- fsl,mpr121
+ # Monolithic Power Systems Inc. multi-phase controller mp2856
+ - mps,mp2856
+ # Monolithic Power Systems Inc. multi-phase controller mp2857
+ - mps,mp2857
# Monolithic Power Systems Inc. multi-phase controller mp2888
- mps,mp2888
# Monolithic Power Systems Inc. multi-phase controller mp2971
- mps,mp2973
# Monolithic Power Systems Inc. multi-phase controller mp2975
- mps,mp2975
+ # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+ - mps,mp5990
# Honeywell Humidicon HIH-6130 humidity/temperature sensor
- honeywell,hi6130
# IBM Common Form Factor Power Supply Versions (all versions)
- infineon,ir38263
# Infineon IRPS5401 Voltage Regulator (PMIC)
- infineon,irps5401
- # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
- - infineon,slb9635tt
- # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
- - infineon,slb9645tt
- # Infineon SLB9673 I2C TPM 2.0
- - infineon,slb9673
# Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
- infineon,tlv493d-a1b6
# Infineon Multi-phase Digital VR Controller xdpe11280
- isil,isl29030
# Intersil ISL68137 Digital Output Configurable PWM Controller
- isil,isl68137
+ # Intersil ISL76682 Ambient Light Sensor
+ - isil,isl76682
# Linear Technology LTC2488
- lineartechnology,ltc2488
# 5 Bit Programmable, Pulse-Width Modulator
- national,lm85
# I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
- national,lm92
- # i2c trusted platform module (TPM)
- - nuvoton,npct501
- # i2c trusted platform module (TPM2)
- - nuvoton,npct601
# Nuvoton Temperature Sensor
- nuvoton,w83773g
# OKI ML86V7667 video decoder
- silabs,si7020
# Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
- skyworks,sky81452
- # Socionext SynQuacer TPM MMIO module
- - socionext,synquacer-tpm-mmio
# SparkFun Qwiic Joystick (COM-15168) with i2c interface
- sparkfun,qwiic-joystick
# i2c serial eeprom (24cxx)
- winbond,w83793
# Vicor Corporation Digital Supervisor
- vicor,pli1209bc
- # i2c trusted platform module (TPM)
- - winbond,wpct301
required:
- compatible
- qcom,msm8996-ufshc
- qcom,msm8998-ufshc
- qcom,sa8775p-ufshc
+ - qcom,sc7280-ufshc
- qcom,sc8280xp-ufshc
- qcom,sdm845-ufshc
- qcom,sm6115-ufshc
enum:
- qcom,msm8998-ufshc
- qcom,sa8775p-ufshc
+ - qcom,sc7280-ufshc
- qcom,sc8280xp-ufshc
- qcom,sm8250-ufshc
- qcom,sm8350-ufshc
samsung,sysreg:
$ref: /schemas/types.yaml#/definitions/phandle-array
- description: Should be phandle/offset pair. The phandle to the syscon node
- which indicates the FSYSx sysreg interface and the offset of
- the control register for UFS io coherency setting.
+ items:
+ - items:
+ - description: phandle to FSYSx sysreg node
+ - description: offset of the control register for UFS io coherency setting
+ description:
+ Phandle and offset to the FSYSx sysreg for UFS io coherency setting.
dma-coherent: true
description:
Specifies max. load that can be drawn from VCCQ2 supply.
+ msi-parent: true
+
dependencies:
freq-table-hz: [ clocks ]
operating-points-v2: [ clocks, clock-names ]
title: Xilinx SuperSpeed DWC3 USB SoC controller
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
properties:
compatible:
maintainers:
- Mathias Nyman <mathias.nyman@intel.com>
-allOf:
- - $ref: usb-xhci.yaml#
-
properties:
compatible:
oneOf:
- marvell,armada-380-xhci
- marvell,armada-8k-xhci
- const: generic-xhci
+ - description: Broadcom SoCs with power domains
+ items:
+ - enum:
+ - brcm,bcm2711-xhci
+ - const: brcm,xhci-brcm-v2
- description: Broadcom STB SoCs with xHCI
enum:
- brcm,xhci-brcm-v2
- const: core
- const: reg
+ power-domains:
+ maxItems: 1
+
unevaluatedProperties: false
required:
- reg
- interrupts
+allOf:
+ - $ref: usb-xhci.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm2711-xhci
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
+
examples:
- |
usb@f0931000 {
description:
the regulator that provides 3.3V core power to the hub.
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the peer hub on the controller.
+
required:
- compatible
- reg
defined in the xHCI spec on MTK's controller.
default: 5000
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ It is a quirk used to work around Gen1 isoc-in endpoint transfer issue
+ that still send out unexpected ACK after device finishes the burst
+ transfer with a short packet and cause an exception, specially on a 4K
+ camera device, it happens on controller before about IPM v1.6.0;
+ the side-effect is that it may cause performance drop about 10%,
+ including bulk transfer, prefer to use 3k here. The size is in bytes.
+ enum: [1024, 2048, 3072, 4096]
+
# the following properties are only used for case 1
wakeup-source:
description: enable USB remote wakeup, see power/wakeup-source.txt
USB 2.0 traffic.
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
- Michal Simek <michal.simek@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
properties:
compatible:
$id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: NXP PTN5110 Typec Port Cotroller
+title: NXP PTN5110 Type-C Port Controller
maintainers:
- Li Jun <jun.li@nxp.com>
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
+ - qcom,sm8650-dwc3
+ - qcom,x1e80100-dwc3
- const: qcom,dwc3
reg:
- const: apps-usb
interrupts:
- minItems: 1
- maxItems: 4
+ description: |
+ Different types of interrupts are used based on HS PHY used on target:
+ - pwr_event: Used for wakeup based on other power events.
+ - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+ hs_phy_irq which is not triggered by default and its
+ functionality is mutually exclusive to that of
+ {dp/dm}_hs_phy_irq and qusb2_phy_irq.
+ - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
+ expose only a single IRQ whose behavior can be modified
+ by the QUSB2PHY_INTR_CTRL register. The required DPSE/
+ DMSE configuration is done in QUSB2PHY_INTR_CTRL register
+ of PHY address space.
+ - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
+ DM pads of the SoC. These are used for wakeup
+ only on SoCs with non-QUSB2 targets with
+ exception of SDM670/SDM845/SM6350.
+ - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
+ minItems: 2
+ maxItems: 5
interrupt-names:
- minItems: 1
- maxItems: 4
+ minItems: 2
+ maxItems: 5
qcom,select-utmi-as-pipe-clk:
description:
contains:
enum:
- qcom,sc8280xp-dwc3
+ - qcom,x1e80100-dwc3
then:
properties:
clocks:
then:
properties:
clocks:
- minItems: 5
- maxItems: 6
+ minItems: 4
+ maxItems: 5
clock-names:
oneOf:
- items:
- const: iface
- const: sleep
- const: mock_utmi
- - const: bus
- items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- - const: bus
- if:
properties:
- qcom,sm8250-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
+ - qcom,sm8650-dwc3
then:
properties:
clocks:
compatible:
contains:
enum:
- - qcom,ipq4019-dwc3
+ - qcom,ipq5018-dwc3
- qcom,ipq6018-dwc3
- - qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- - qcom,msm8994-dwc3
- - qcom,qcs404-dwc3
- - qcom,sc7180-dwc3
- - qcom,sdm670-dwc3
- - qcom,sdm845-dwc3
- - qcom,sdx55-dwc3
- - qcom,sdx65-dwc3
- - qcom,sdx75-dwc3
- - qcom,sm4250-dwc3
- - qcom,sm6125-dwc3
- - qcom,sm6350-dwc3
- - qcom,sm8150-dwc3
- - qcom,sm8250-dwc3
- - qcom,sm8350-dwc3
- - qcom,sm8450-dwc3
- - qcom,sm8550-dwc3
- then:
- properties:
- interrupts:
- items:
- - description: The interrupt that is asserted
- when a wakeup event is received on USB2 bus.
- - description: The interrupt that is asserted
- when a wakeup event is received on USB3 bus.
- - description: Wakeup event on DM line.
- - description: Wakeup event on DP line.
- interrupt-names:
- items:
- - const: hs_phy_irq
- - const: ss_phy_irq
- - const: dm_hs_phy_irq
- - const: dp_hs_phy_irq
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,msm8953-dwc3
- - qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- - qcom,sm6115-dwc3
then:
properties:
interrupts:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
interrupt-names:
items:
- - const: hs_phy_irq
+ - const: pwr_event
+ - const: qusb2_phy
- const: ss_phy_irq
- if:
compatible:
contains:
enum:
- - qcom,ipq5018-dwc3
- - qcom,ipq5332-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,qcs404-dwc3
- qcom,sdm660-dwc3
- then:
- properties:
- interrupts:
- minItems: 1
- maxItems: 2
- interrupt-names:
- minItems: 1
- items:
- - const: hs_phy_irq
- - const: ss_phy_irq
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc7280-dwc3
+ - qcom,sm6115-dwc3
+ - qcom,sm6125-dwc3
then:
properties:
interrupts:
minItems: 3
maxItems: 4
interrupt-names:
- minItems: 3
items:
+ - const: pwr_event
+ - const: qusb2_phy
- const: hs_phy_irq
- - const: dp_hs_phy_irq
- - const: dm_hs_phy_irq
- const: ss_phy_irq
- if:
compatible:
contains:
enum:
- - qcom,sc8280xp-dwc3
+ - qcom,ipq5332-dwc3
+ - qcom,x1e80100-dwc3
then:
properties:
interrupts:
compatible:
contains:
enum:
+ - qcom,ipq4019-dwc3
+ - qcom,ipq8064-dwc3
+ - qcom,msm8994-dwc3
- qcom,sa8775p-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
+ - qcom,sc8280xp-dwc3
+ - qcom,sdm670-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
+ - qcom,sdx75-dwc3
+ - qcom,sm4250-dwc3
+ - qcom,sm6350-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8350-dwc3
+ - qcom,sm8450-dwc3
+ - qcom,sm8550-dwc3
+ - qcom,sm8650-dwc3
then:
properties:
interrupts:
- minItems: 3
- maxItems: 4
+ minItems: 4
+ maxItems: 5
interrupt-names:
- minItems: 3
items:
- const: pwr_event
+ - const: hs_phy_irq
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
<GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event", "hs_phy_irq",
+ "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
+ functionally separate USB SubSystem for Altmode/Analog Audio Switch
+ accessible over an I2C interface.
+ The Audio Headphone and Microphone data path between the Codec and the
+ USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint
+ graph description to handle USB-C altmode & orientation switching for Audio
+ Accessory Mode.
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,wcd9390-usbss
+ - items:
+ - const: qcom,wcd9395-usbss
+ - const: qcom,wcd9390-usbss
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description: USBSS VDD power supply
+
+ mode-switch:
+ description: Flag the port as possible handle of altmode switching
+ type: boolean
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the WCD939x USB SubSystem to a TypeC controller for the
+ purpose of handling altmode muxing and orientation switching.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the
+ purpose of handling USB-C Audio Accessory Mode muxing and orientation switching.
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec-mux@42 {
+ compatible = "qcom,wcd9390-usbss";
+ reg = <0x42>;
+
+ vdd-supply = <&vreg_bob>;
+
+ mode-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ wcd9390_usbss_sbu: endpoint {
+ remote-endpoint = <&typec_sbu>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ wcd9390_usbss_codec: endpoint {
+ remote-endpoint = <&wcd9390_codec_usbss>;
+ };
+ };
+ };
+ };
+ };
+...
- items:
- enum:
- renesas,usbhs-r7s9210 # RZ/A2
- - renesas,usbhs-r9a07g043 # RZ/G2UL
+ - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
- renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
- renesas,usbhs-r9a07g054 # RZ/V2L
- const: renesas,rza2-usbhs
items:
enum: [1, 4, 8, 16, 32, 64, 128, 256]
+ num-hc-interrupters:
+ maximum: 8
+ default: 1
+
port:
$ref: /schemas/graph.yaml#/properties/port
description:
- const: main
- const: patch-address
+ reset-gpios:
+ description: GPIO used for the HRESET pin.
+ maxItems: 1
+
wakeup-source: true
interrupts:
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&typec_pins>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
typec_con: connector {
compatible = "usb-c-connector";
description: Interrupt moderation interval
default: 5000
+ num-hc-interrupters:
+ description: Maximum number of interrupters to allocate
+ $ref: /schemas/types.yaml#/definitions/uint16
+ minimum: 1
+ maximum: 1024
+
additionalProperties: true
examples:
title: Xilinx udc controller
maintainers:
- - Piyush Mehta <piyush.mehta@amd.com>
+ - Mubin Sayyed <mubin.sayyed@amd.com>
+ - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
properties:
compatible:
description: ALFA Network Inc.
"^allegro,.*":
description: Allegro DVT
+ "^alliedvision,.*":
+ description: Allied Vision Technologies GmbH
"^allo,.*":
description: Allo.com
"^allwinner,.*":
description: Andes Technology Corporation
"^anvo,.*":
description: Anvo-Systems Dresden GmbH
+ "^aosong,.*":
+ description: Guangzhou Aosong Electronic Co., Ltd.
"^apm,.*":
description: Applied Micro Circuits Corporation (APM)
"^apple,.*":
description: CompuLab Ltd.
"^congatec,.*":
description: congatec GmbH
+ "^coolpi,.*":
+ description: cool-pi.com
"^coreriver,.*":
description: CORERIVER Semiconductor Co.,Ltd.
"^corpro,.*":
description: Digi International Inc.
"^digilent,.*":
description: Diglent, Inc.
+ "^dimonoff,.*":
+ description: Dimonoff inc.
"^diodes,.*":
description: Diodes, Inc.
"^dioo,.*":
description: Fairphone B.V.
"^faraday,.*":
description: Faraday Technology Corporation
+ "^fascontek,.*":
+ description: Fascontek
"^fastrax,.*":
description: Fastrax Oy
"^fcs,.*":
description: Fujitsu Ltd.
"^fxtec,.*":
description: FX Technology Ltd.
+ "^galaxycore,.*":
+ description: GalaxyCore Inc.
"^gardena,.*":
description: GARDENA GmbH
"^gateway,.*":
description: Hewlett Packard Enterprise
"^hsg,.*":
description: HannStar Display Co.
+ "^htc,.*":
+ description: HTC Corporation
"^huawei,.*":
description: Huawei Technologies Co., Ltd.
"^hugsun,.*":
description: Shenzhen Roofull Technology Co, Ltd
"^roseapplepi,.*":
description: RoseapplePi.org
+ "^rve,.*":
+ description: Recharge Véhicule Électrique (RVE) inc.
"^saef,.*":
description: Saef Technology Limited
"^samsung,.*":
description: Skyworks Solutions, Inc.
"^smartlabs,.*":
description: SmartLabs LLC
+ "^smi,.*":
+ description: Silicon Motion Technology Corporation
"^smsc,.*":
description: Standard Microsystems Corporation
"^snps,.*":
description: Technologic Systems
"^techstar,.*":
description: Shenzhen Techstar Electronics Co., Ltd.
+ "^techwell,.*":
+ description: Techwell, Inc.
"^teejet,.*":
description: TeeJet
"^teltonika,.*":
description: TPO
"^tq,.*":
description: TQ-Systems GmbH
+ "^transpeed,.*":
+ description: Transpeed
"^traverse,.*":
description: Traverse Technologies Australia Pty Ltd
"^tronfy,.*":
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/amd,axi-1wire-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD AXI 1-wire bus host for programmable logic
+
+maintainers:
+ - Kris Chaplin <kris.chaplin@amd.com>
+
+properties:
+ compatible:
+ const: amd,axi-1wire-host
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ onewire@a0000000 {
+ compatible = "amd,axi-1wire-host";
+ reg = <0xa0000000 0x10000>;
+ clocks = <&zynqmp_clk 0x47>;
+ interrupts = <GIC_SPI 0x59 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+...
title: Allwinner A10 Watchdog
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
oneOf:
title: Alphascale asm9260 Watchdog timer
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Oleksij Rempel <linux@rempel-privat.de>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
const: alphascale,asm9260-wdt
title: Apple SoC Watchdog
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Sven Peter <sven@svenpeter.dev>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
items:
title: ARM Secure Monitor Call based watchdog
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Julius Werner <jwerner@chromium.org>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
enum:
title: BCM63xx and BCM7038 watchdog timer
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Florian Fainelli <f.fainelli@gmail.com>
- Justin Chen <justinpopo6@gmail.com>
- Rafał Miłecki <rafal@milecki.pl>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
enum:
The clock running the watchdog. If no clock is found the driver will
default to 27000000 Hz.
-unevaluatedProperties: false
-
required:
- reg
+unevaluatedProperties: false
+
examples:
- |
watchdog@f040a7e8 {
timer counters. The first timer (called "Timer A") is the only one that can be
used as watchdog.
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Baruch Siach <baruch@tkos.co.il>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
const: cnxt,cx92755-wdt
$id: http://devicetree.org/schemas/watchdog/dlg,da9062-watchdog.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Dialog Semiconductor DA9062/61 Watchdog Timer
+title: Dialog Semiconductor DA906{1,2,3} Watchdog Timer
maintainers:
- Steve Twiss <stwiss.opensource@diasemi.com>
properties:
compatible:
- enum:
- - dlg,da9061-watchdog
- - dlg,da9062-watchdog
+ oneOf:
+ - enum:
+ - dlg,da9062-watchdog
+ - dlg,da9063-watchdog
+ - items:
+ - const: dlg,da9061-watchdog
+ - const: dlg,da9062-watchdog
dlg,use-sw-pm:
type: boolean
maintainers:
- Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
enum:
- interrupt-names
- clocks
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
title: Maxim 63xx Watchdog Timers
-allOf:
- - $ref: watchdog.yaml#
- - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
-
maintainers:
- Marc Zyngier <maz@kernel.org>
- Linus Walleij <linus.walleij@linaro.org>
+allOf:
+ - $ref: watchdog.yaml#
+ - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
properties:
compatible:
enum:
- mediatek,mt6735-wdt
- mediatek,mt6795-wdt
- mediatek,mt7986-wdt
+ - mediatek,mt7988-wdt
- mediatek,mt8183-wdt
- mediatek,mt8186-wdt
- mediatek,mt8188-wdt
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nxp,pnx4008-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX watchdog timer
+
+maintainers:
+ - Roland Stigge <stigge@antcom.de>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ const: nxp,pnx4008-wdt
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@4003c000 {
+ compatible = "nxp,pnx4008-wdt";
+ reg = <0x4003c000 0x1000>;
+ timeout-sec = <10>;
+ };
+++ /dev/null
-* NXP PNX watchdog timer
-
-Required properties:
-- compatible: must be "nxp,pnx4008-wdt"
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
- watchdog@4003c000 {
- compatible = "nxp,pnx4008-wdt";
- reg = <0x4003C000 0x1000>;
- timeout-sec = <10>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
+
+maintainers:
+ - Gabor Juhos <juhosg@openwrt.org>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ const: qca,ar7130-wdt
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+ };
+++ /dev/null
-* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: must be "qca,ar7130-wdt"
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-Example:
-
-wdt@18060008 {
- compatible = "qca,ar9330-wdt", "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
- pmic@0 {
- compatible = "qcom,pm8916", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
+ spmi {
+ #address-cells = <2>;
#size-cells = <0>;
- pon@800 {
- compatible = "qcom,pm8916-pon";
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- watchdog {
- compatible = "qcom,pm8916-wdt";
- interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
- timeout-sec = <60>;
+ pmic@0 {
+ compatible = "qcom,pm8916", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ watchdog {
+ compatible = "qcom,pm8916-wdt";
+ interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+ timeout-sec = <60>;
+ };
};
};
};
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
reg = <0x17c10000 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
timeout-sec = <10>;
};
+++ /dev/null
-Realtek RTD1295 Watchdog
-========================
-
-Required properties:
-
-- compatible : Should be "realtek,rtd1295-watchdog"
-- reg : Specifies the physical base address and size of registers
-- clocks : Specifies one clock input
-
-
-Example:
-
- watchdog@98007680 {
- compatible = "realtek,rtd1295-watchdog";
- reg = <0x98007680 0x100>;
- clocks = <&osc27M>;
- };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,rtd1295-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTD1295 Watchdog
+
+maintainers:
+ - Andreas Färber <afaerber@suse.de>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ const: realtek,rtd1295-watchdog
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@98007680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x98007680 0x100>;
+ clocks = <&osc27M>;
+ };
properties:
compatible:
- enum:
- - samsung,s3c2410-wdt # for S3C2410
- - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4
- - samsung,exynos5250-wdt # for Exynos5250
- - samsung,exynos5420-wdt # for Exynos5420
- - samsung,exynos7-wdt # for Exynos7
- - samsung,exynos850-wdt # for Exynos850
- - samsung,exynosautov9-wdt # for Exynosautov9
+ oneOf:
+ - enum:
+ - google,gs101-wdt # for Google gs101
+ - samsung,s3c2410-wdt # for S3C2410
+ - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4
+ - samsung,exynos5250-wdt # for Exynos5250
+ - samsung,exynos5420-wdt # for Exynos5420
+ - samsung,exynos7-wdt # for Exynos7
+ - samsung,exynos850-wdt # for Exynos850
+ - samsung,exynosautov9-wdt # for Exynosautov9
+ - items:
+ - enum:
+ - tesla,fsd-wdt
+ - const: samsung,exynos7-wdt
reg:
maxItems: 1
samsung,cluster-index:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- Index of CPU cluster on which watchdog is running (in case of Exynos850)
+ Index of CPU cluster on which watchdog is running (in case of Exynos850
+ or Google gs101).
samsung,syscon-phandle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the PMU system controller node (in case of Exynos5250,
- Exynos5420, Exynos7 and Exynos850).
+ Exynos5420, Exynos7, Exynos850 and gs101).
required:
- compatible
compatible:
contains:
enum:
+ - google,gs101-wdt
- samsung,exynos5250-wdt
- samsung,exynos5420-wdt
- samsung,exynos7-wdt
compatible:
contains:
enum:
+ - google,gs101-wdt
- samsung,exynos850-wdt
- samsung,exynosautov9-wdt
then:
title: Synopsys Designware Watchdog Timer
-allOf:
- - $ref: watchdog.yaml#
-
maintainers:
- Jamie Iles <jamie@jamieiles.com>
+allOf:
+ - $ref: watchdog.yaml#
+
properties:
compatible:
oneOf:
minItems: 16
maxItems: 16
-unevaluatedProperties: false
-
required:
- compatible
- reg
- clocks
+unevaluatedProperties: false
+
examples:
- |
watchdog@ffd02000 {
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/technologic,ts7200-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems TS-72xx based SBCs watchdog
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: technologic,ts7200-wdt
+ - items:
+ - enum:
+ - technologic,ts7300-wdt
+ - technologic,ts7260-wdt
+ - technologic,ts7250-wdt
+ - const: technologic,ts7200-wdt
+
+ reg:
+ items:
+ - description: control register
+ - description: feed register
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@23800000 {
+ compatible = "technologic,ts7200-wdt";
+ reg = <0x23800000 0x01>, <0x23c00000 0x01>;
+ timeout-sec = <30>;
+ };
+
+...
#define QCOM_ID_SA8775P 534
#define QCOM_ID_QRU1000 539
#define QCOM_ID_QDU1000 545
+#define QCOM_ID_SM8650 557
#define QCOM_ID_SM4450 568
#define QCOM_ID_QDU1010 587
#define QCOM_ID_QRU1032 588
#define CLKID_MIPI_DSI_PXCLK_DIV 268
#define CLKID_MIPI_DSI_PXCLK_SEL 269
#define CLKID_MIPI_DSI_PXCLK 270
+#define CLKID_CTS_ENCL 271
+#define CLKID_CTS_ENCL_SEL 272
+#define CLKID_MIPI_ISP_DIV 273
+#define CLKID_MIPI_ISP_SEL 274
+#define CLKID_MIPI_ISP 275
+#define CLKID_MIPI_ISP_GATE 276
+#define CLKID_MIPI_ISP_CSI_PHY0 277
+#define CLKID_MIPI_ISP_CSI_PHY1 278
#endif /* __G12A_CLKC_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Linaro Ltd.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Device Tree binding constants for Google gs101 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
+#define _DT_BINDINGS_CLOCK_GOOGLE_GS101_H
+
+/* CMU_TOP PLL */
+#define CLK_FOUT_SHARED0_PLL 1
+#define CLK_FOUT_SHARED1_PLL 2
+#define CLK_FOUT_SHARED2_PLL 3
+#define CLK_FOUT_SHARED3_PLL 4
+#define CLK_FOUT_SPARE_PLL 5
+
+/* CMU_TOP MUX */
+#define CLK_MOUT_PLL_SHARED0 6
+#define CLK_MOUT_PLL_SHARED1 7
+#define CLK_MOUT_PLL_SHARED2 8
+#define CLK_MOUT_PLL_SHARED3 9
+#define CLK_MOUT_PLL_SPARE 10
+#define CLK_MOUT_CMU_BO_BUS 11
+#define CLK_MOUT_CMU_BUS0_BUS 12
+#define CLK_MOUT_CMU_BUS1_BUS 13
+#define CLK_MOUT_CMU_BUS2_BUS 14
+#define CLK_MOUT_CMU_CIS_CLK0 15
+#define CLK_MOUT_CMU_CIS_CLK1 16
+#define CLK_MOUT_CMU_CIS_CLK2 17
+#define CLK_MOUT_CMU_CIS_CLK3 18
+#define CLK_MOUT_CMU_CIS_CLK4 19
+#define CLK_MOUT_CMU_CIS_CLK5 20
+#define CLK_MOUT_CMU_CIS_CLK6 21
+#define CLK_MOUT_CMU_CIS_CLK7 22
+#define CLK_MOUT_CMU_CMU_BOOST 23
+#define CLK_MOUT_CMU_BOOST_OPTION1 24
+#define CLK_MOUT_CMU_CORE_BUS 25
+#define CLK_MOUT_CMU_CPUCL0_DBG 26
+#define CLK_MOUT_CMU_CPUCL0_SWITCH 27
+#define CLK_MOUT_CMU_CPUCL1_SWITCH 28
+#define CLK_MOUT_CMU_CPUCL2_SWITCH 29
+#define CLK_MOUT_CMU_CSIS_BUS 30
+#define CLK_MOUT_CMU_DISP_BUS 31
+#define CLK_MOUT_CMU_DNS_BUS 32
+#define CLK_MOUT_CMU_DPU_BUS 33
+#define CLK_MOUT_CMU_EH_BUS 34
+#define CLK_MOUT_CMU_G2D_G2D 35
+#define CLK_MOUT_CMU_G2D_MSCL 36
+#define CLK_MOUT_CMU_G3AA_G3AA 37
+#define CLK_MOUT_CMU_G3D_BUSD 38
+#define CLK_MOUT_CMU_G3D_GLB 39
+#define CLK_MOUT_CMU_G3D_SWITCH 40
+#define CLK_MOUT_CMU_GDC_GDC0 41
+#define CLK_MOUT_CMU_GDC_GDC1 42
+#define CLK_MOUT_CMU_GDC_SCSC 43
+#define CLK_MOUT_CMU_HPM 44
+#define CLK_MOUT_CMU_HSI0_BUS 45
+#define CLK_MOUT_CMU_HSI0_DPGTC 46
+#define CLK_MOUT_CMU_HSI0_USB31DRD 47
+#define CLK_MOUT_CMU_HSI0_USBDPDBG 48
+#define CLK_MOUT_CMU_HSI1_BUS 49
+#define CLK_MOUT_CMU_HSI1_PCIE 50
+#define CLK_MOUT_CMU_HSI2_BUS 51
+#define CLK_MOUT_CMU_HSI2_MMC_CARD 52
+#define CLK_MOUT_CMU_HSI2_PCIE 53
+#define CLK_MOUT_CMU_HSI2_UFS_EMBD 54
+#define CLK_MOUT_CMU_IPP_BUS 55
+#define CLK_MOUT_CMU_ITP_BUS 56
+#define CLK_MOUT_CMU_MCSC_ITSC 57
+#define CLK_MOUT_CMU_MCSC_MCSC 58
+#define CLK_MOUT_CMU_MFC_MFC 59
+#define CLK_MOUT_CMU_MIF_BUSP 60
+#define CLK_MOUT_CMU_MIF_SWITCH 61
+#define CLK_MOUT_CMU_MISC_BUS 62
+#define CLK_MOUT_CMU_MISC_SSS 63
+#define CLK_MOUT_CMU_PDP_BUS 64
+#define CLK_MOUT_CMU_PDP_VRA 65
+#define CLK_MOUT_CMU_PERIC0_BUS 66
+#define CLK_MOUT_CMU_PERIC0_IP 67
+#define CLK_MOUT_CMU_PERIC1_BUS 68
+#define CLK_MOUT_CMU_PERIC1_IP 69
+#define CLK_MOUT_CMU_TNR_BUS 70
+#define CLK_MOUT_CMU_TOP_BOOST_OPTION1 71
+#define CLK_MOUT_CMU_TOP_CMUREF 72
+#define CLK_MOUT_CMU_TPU_BUS 73
+#define CLK_MOUT_CMU_TPU_TPU 74
+#define CLK_MOUT_CMU_TPU_TPUCTL 75
+#define CLK_MOUT_CMU_TPU_UART 76
+#define CLK_MOUT_CMU_CMUREF 77
+
+/* CMU_TOP Dividers */
+#define CLK_DOUT_CMU_BO_BUS 78
+#define CLK_DOUT_CMU_BUS0_BUS 79
+#define CLK_DOUT_CMU_BUS1_BUS 80
+#define CLK_DOUT_CMU_BUS2_BUS 81
+#define CLK_DOUT_CMU_CIS_CLK0 82
+#define CLK_DOUT_CMU_CIS_CLK1 83
+#define CLK_DOUT_CMU_CIS_CLK2 84
+#define CLK_DOUT_CMU_CIS_CLK3 85
+#define CLK_DOUT_CMU_CIS_CLK4 86
+#define CLK_DOUT_CMU_CIS_CLK5 87
+#define CLK_DOUT_CMU_CIS_CLK6 88
+#define CLK_DOUT_CMU_CIS_CLK7 89
+#define CLK_DOUT_CMU_CORE_BUS 90
+#define CLK_DOUT_CMU_CPUCL0_DBG 91
+#define CLK_DOUT_CMU_CPUCL0_SWITCH 92
+#define CLK_DOUT_CMU_CPUCL1_SWITCH 93
+#define CLK_DOUT_CMU_CPUCL2_SWITCH 94
+#define CLK_DOUT_CMU_CSIS_BUS 95
+#define CLK_DOUT_CMU_DISP_BUS 96
+#define CLK_DOUT_CMU_DNS_BUS 97
+#define CLK_DOUT_CMU_DPU_BUS 98
+#define CLK_DOUT_CMU_EH_BUS 99
+#define CLK_DOUT_CMU_G2D_G2D 100
+#define CLK_DOUT_CMU_G2D_MSCL 101
+#define CLK_DOUT_CMU_G3AA_G3AA 102
+#define CLK_DOUT_CMU_G3D_BUSD 103
+#define CLK_DOUT_CMU_G3D_GLB 104
+#define CLK_DOUT_CMU_G3D_SWITCH 105
+#define CLK_DOUT_CMU_GDC_GDC0 106
+#define CLK_DOUT_CMU_GDC_GDC1 107
+#define CLK_DOUT_CMU_GDC_SCSC 108
+#define CLK_DOUT_CMU_CMU_HPM 109
+#define CLK_DOUT_CMU_HSI0_BUS 110
+#define CLK_DOUT_CMU_HSI0_DPGTC 111
+#define CLK_DOUT_CMU_HSI0_USB31DRD 112
+#define CLK_DOUT_CMU_HSI0_USBDPDBG 113
+#define CLK_DOUT_CMU_HSI1_BUS 114
+#define CLK_DOUT_CMU_HSI1_PCIE 115
+#define CLK_DOUT_CMU_HSI2_BUS 116
+#define CLK_DOUT_CMU_HSI2_MMC_CARD 117
+#define CLK_DOUT_CMU_HSI2_PCIE 118
+#define CLK_DOUT_CMU_HSI2_UFS_EMBD 119
+#define CLK_DOUT_CMU_IPP_BUS 120
+#define CLK_DOUT_CMU_ITP_BUS 121
+#define CLK_DOUT_CMU_MCSC_ITSC 122
+#define CLK_DOUT_CMU_MCSC_MCSC 123
+#define CLK_DOUT_CMU_MFC_MFC 124
+#define CLK_DOUT_CMU_MIF_BUSP 125
+#define CLK_DOUT_CMU_MISC_BUS 126
+#define CLK_DOUT_CMU_MISC_SSS 127
+#define CLK_DOUT_CMU_OTP 128
+#define CLK_DOUT_CMU_PDP_BUS 129
+#define CLK_DOUT_CMU_PDP_VRA 130
+#define CLK_DOUT_CMU_PERIC0_BUS 131
+#define CLK_DOUT_CMU_PERIC0_IP 132
+#define CLK_DOUT_CMU_PERIC1_BUS 133
+#define CLK_DOUT_CMU_PERIC1_IP 134
+#define CLK_DOUT_CMU_TNR_BUS 135
+#define CLK_DOUT_CMU_TPU_BUS 136
+#define CLK_DOUT_CMU_TPU_TPU 137
+#define CLK_DOUT_CMU_TPU_TPUCTL 138
+#define CLK_DOUT_CMU_TPU_UART 139
+#define CLK_DOUT_CMU_CMU_BOOST 140
+#define CLK_DOUT_CMU_CMU_CMUREF 141
+#define CLK_DOUT_CMU_SHARED0_DIV2 142
+#define CLK_DOUT_CMU_SHARED0_DIV3 143
+#define CLK_DOUT_CMU_SHARED0_DIV4 144
+#define CLK_DOUT_CMU_SHARED0_DIV5 145
+#define CLK_DOUT_CMU_SHARED1_DIV2 146
+#define CLK_DOUT_CMU_SHARED1_DIV3 147
+#define CLK_DOUT_CMU_SHARED1_DIV4 148
+#define CLK_DOUT_CMU_SHARED2_DIV2 149
+#define CLK_DOUT_CMU_SHARED3_DIV2 150
+
+/* CMU_TOP Gates */
+#define CLK_GOUT_CMU_BUS0_BOOST 151
+#define CLK_GOUT_CMU_BUS1_BOOST 152
+#define CLK_GOUT_CMU_BUS2_BOOST 153
+#define CLK_GOUT_CMU_CORE_BOOST 154
+#define CLK_GOUT_CMU_CPUCL0_BOOST 155
+#define CLK_GOUT_CMU_CPUCL1_BOOST 156
+#define CLK_GOUT_CMU_CPUCL2_BOOST 157
+#define CLK_GOUT_CMU_MIF_BOOST 158
+#define CLK_GOUT_CMU_MIF_SWITCH 159
+#define CLK_GOUT_CMU_BO_BUS 160
+#define CLK_GOUT_CMU_BUS0_BUS 161
+#define CLK_GOUT_CMU_BUS1_BUS 162
+#define CLK_GOUT_CMU_BUS2_BUS 163
+#define CLK_GOUT_CMU_CIS_CLK0 164
+#define CLK_GOUT_CMU_CIS_CLK1 165
+#define CLK_GOUT_CMU_CIS_CLK2 166
+#define CLK_GOUT_CMU_CIS_CLK3 167
+#define CLK_GOUT_CMU_CIS_CLK4 168
+#define CLK_GOUT_CMU_CIS_CLK5 169
+#define CLK_GOUT_CMU_CIS_CLK6 170
+#define CLK_GOUT_CMU_CIS_CLK7 171
+#define CLK_GOUT_CMU_CMU_BOOST 172
+#define CLK_GOUT_CMU_CORE_BUS 173
+#define CLK_GOUT_CMU_CPUCL0_DBG 174
+#define CLK_GOUT_CMU_CPUCL0_SWITCH 175
+#define CLK_GOUT_CMU_CPUCL1_SWITCH 176
+#define CLK_GOUT_CMU_CPUCL2_SWITCH 177
+#define CLK_GOUT_CMU_CSIS_BUS 178
+#define CLK_GOUT_CMU_DISP_BUS 179
+#define CLK_GOUT_CMU_DNS_BUS 180
+#define CLK_GOUT_CMU_DPU_BUS 181
+#define CLK_GOUT_CMU_EH_BUS 182
+#define CLK_GOUT_CMU_G2D_G2D 183
+#define CLK_GOUT_CMU_G2D_MSCL 184
+#define CLK_GOUT_CMU_G3AA_G3AA 185
+#define CLK_GOUT_CMU_G3D_BUSD 186
+#define CLK_GOUT_CMU_G3D_GLB 187
+#define CLK_GOUT_CMU_G3D_SWITCH 188
+#define CLK_GOUT_CMU_GDC_GDC0 189
+#define CLK_GOUT_CMU_GDC_GDC1 190
+#define CLK_GOUT_CMU_GDC_SCSC 191
+#define CLK_GOUT_CMU_HPM 192
+#define CLK_GOUT_CMU_HSI0_BUS 193
+#define CLK_GOUT_CMU_HSI0_DPGTC 194
+#define CLK_GOUT_CMU_HSI0_USB31DRD 195
+#define CLK_GOUT_CMU_HSI0_USBDPDBG 196
+#define CLK_GOUT_CMU_HSI1_BUS 197
+#define CLK_GOUT_CMU_HSI1_PCIE 198
+#define CLK_GOUT_CMU_HSI2_BUS 199
+#define CLK_GOUT_CMU_HSI2_MMC_CARD 200
+#define CLK_GOUT_CMU_HSI2_PCIE 201
+#define CLK_GOUT_CMU_HSI2_UFS_EMBD 202
+#define CLK_GOUT_CMU_IPP_BUS 203
+#define CLK_GOUT_CMU_ITP_BUS 204
+#define CLK_GOUT_CMU_MCSC_ITSC 205
+#define CLK_GOUT_CMU_MCSC_MCSC 206
+#define CLK_GOUT_CMU_MFC_MFC 207
+#define CLK_GOUT_CMU_MIF_BUSP 208
+#define CLK_GOUT_CMU_MISC_BUS 209
+#define CLK_GOUT_CMU_MISC_SSS 210
+#define CLK_GOUT_CMU_PDP_BUS 211
+#define CLK_GOUT_CMU_PDP_VRA 212
+#define CLK_GOUT_CMU_G3AA 213
+#define CLK_GOUT_CMU_PERIC0_BUS 214
+#define CLK_GOUT_CMU_PERIC0_IP 215
+#define CLK_GOUT_CMU_PERIC1_BUS 216
+#define CLK_GOUT_CMU_PERIC1_IP 217
+#define CLK_GOUT_CMU_TNR_BUS 218
+#define CLK_GOUT_CMU_TOP_CMUREF 219
+#define CLK_GOUT_CMU_TPU_BUS 220
+#define CLK_GOUT_CMU_TPU_TPU 221
+#define CLK_GOUT_CMU_TPU_TPUCTL 222
+#define CLK_GOUT_CMU_TPU_UART 223
+
+/* CMU_APM */
+#define CLK_MOUT_APM_FUNC 1
+#define CLK_MOUT_APM_FUNCSRC 2
+#define CLK_DOUT_APM_BOOST 3
+#define CLK_DOUT_APM_USI0_UART 4
+#define CLK_DOUT_APM_USI0_USI 5
+#define CLK_DOUT_APM_USI1_UART 6
+#define CLK_GOUT_APM_APM_CMU_APM_PCLK 7
+#define CLK_GOUT_BUS0_BOOST_OPTION1 8
+#define CLK_GOUT_CMU_BOOST_OPTION1 9
+#define CLK_GOUT_CORE_BOOST_OPTION1 10
+#define CLK_GOUT_APM_FUNC 11
+#define CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK 12
+#define CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK 13
+#define CLK_GOUT_APM_APBIF_PMU_ALIVE_PCLK 14
+#define CLK_GOUT_APM_APBIF_RTC_PCLK 15
+#define CLK_GOUT_APM_APBIF_TRTC_PCLK 16
+#define CLK_GOUT_APM_APM_USI0_UART_IPCLK 17
+#define CLK_GOUT_APM_APM_USI0_UART_PCLK 18
+#define CLK_GOUT_APM_APM_USI0_USI_IPCLK 19
+#define CLK_GOUT_APM_APM_USI0_USI_PCLK 20
+#define CLK_GOUT_APM_APM_USI1_UART_IPCLK 21
+#define CLK_GOUT_APM_APM_USI1_UART_PCLK 22
+#define CLK_GOUT_APM_D_TZPC_APM_PCLK 23
+#define CLK_GOUT_APM_GPC_APM_PCLK 24
+#define CLK_GOUT_APM_GREBEINTEGRATION_HCLK 25
+#define CLK_GOUT_APM_INTMEM_ACLK 26
+#define CLK_GOUT_APM_INTMEM_PCLK 27
+#define CLK_GOUT_APM_LHM_AXI_G_SWD_I_CLK 28
+#define CLK_GOUT_APM_LHM_AXI_P_AOCAPM_I_CLK 29
+#define CLK_GOUT_APM_LHM_AXI_P_APM_I_CLK 30
+#define CLK_GOUT_APM_LHS_AXI_D_APM_I_CLK 31
+#define CLK_GOUT_APM_LHS_AXI_G_DBGCORE_I_CLK 32
+#define CLK_GOUT_APM_LHS_AXI_G_SCAN2DRAM_I_CLK 33
+#define CLK_GOUT_APM_MAILBOX_APM_AOC_PCLK 34
+#define CLK_GOUT_APM_MAILBOX_APM_AP_PCLK 35
+#define CLK_GOUT_APM_MAILBOX_APM_GSA_PCLK 36
+#define CLK_GOUT_APM_MAILBOX_APM_SWD_PCLK 37
+#define CLK_GOUT_APM_MAILBOX_APM_TPU_PCLK 38
+#define CLK_GOUT_APM_MAILBOX_AP_AOC_PCLK 39
+#define CLK_GOUT_APM_MAILBOX_AP_DBGCORE_PCLK 40
+#define CLK_GOUT_APM_PMU_INTR_GEN_PCLK 41
+#define CLK_GOUT_APM_ROM_CRC32_HOST_ACLK 42
+#define CLK_GOUT_APM_ROM_CRC32_HOST_PCLK 43
+#define CLK_GOUT_APM_CLK_APM_BUS_CLK 44
+#define CLK_GOUT_APM_CLK_APM_USI0_UART_CLK 45
+#define CLK_GOUT_APM_CLK_APM_USI0_USI_CLK 46
+#define CLK_GOUT_APM_CLK_APM_USI1_UART_CLK 47
+#define CLK_GOUT_APM_SPEEDY_APM_PCLK 48
+#define CLK_GOUT_APM_SPEEDY_SUB_APM_PCLK 49
+#define CLK_GOUT_APM_SSMT_D_APM_ACLK 50
+#define CLK_GOUT_APM_SSMT_D_APM_PCLK 51
+#define CLK_GOUT_APM_SSMT_G_DBGCORE_ACLK 52
+#define CLK_GOUT_APM_SSMT_G_DBGCORE_PCLK 53
+#define CLK_GOUT_APM_SS_DBGCORE_SS_DBGCORE_HCLK 54
+#define CLK_GOUT_APM_SYSMMU_D_APM_CLK_S2 55
+#define CLK_GOUT_APM_SYSREG_APM_PCLK 56
+#define CLK_GOUT_APM_UASC_APM_ACLK 57
+#define CLK_GOUT_APM_UASC_APM_PCLK 58
+#define CLK_GOUT_APM_UASC_DBGCORE_ACLK 59
+#define CLK_GOUT_APM_UASC_DBGCORE_PCLK 60
+#define CLK_GOUT_APM_UASC_G_SWD_ACLK 61
+#define CLK_GOUT_APM_UASC_G_SWD_PCLK 62
+#define CLK_GOUT_APM_UASC_P_AOCAPM_ACLK 63
+#define CLK_GOUT_APM_UASC_P_AOCAPM_PCLK 64
+#define CLK_GOUT_APM_UASC_P_APM_ACLK 65
+#define CLK_GOUT_APM_UASC_P_APM_PCLK 66
+#define CLK_GOUT_APM_WDT_APM_PCLK 67
+#define CLK_GOUT_APM_XIU_DP_APM_ACLK 68
+#define CLK_APM_PLL_DIV2_APM 69
+#define CLK_APM_PLL_DIV4_APM 70
+#define CLK_APM_PLL_DIV16_APM 71
+
+/* CMU_MISC */
+#define CLK_MOUT_MISC_BUS_USER 1
+#define CLK_MOUT_MISC_SSS_USER 2
+#define CLK_MOUT_MISC_GIC 3
+#define CLK_DOUT_MISC_BUSP 4
+#define CLK_DOUT_MISC_GIC 5
+#define CLK_GOUT_MISC_MISC_CMU_MISC_PCLK 6
+#define CLK_GOUT_MISC_OTP_CON_BIRA_I_OSCCLK 7
+#define CLK_GOUT_MISC_OTP_CON_BISR_I_OSCCLK 8
+#define CLK_GOUT_MISC_OTP_CON_TOP_I_OSCCLK 9
+#define CLK_GOUT_MISC_CLK_MISC_OSCCLK_CLK 10
+#define CLK_GOUT_MISC_ADM_AHB_SSS_HCLKM 11
+#define CLK_GOUT_MISC_AD_APB_DIT_PCLKM 12
+#define CLK_GOUT_MISC_AD_APB_PUF_PCLKM 13
+#define CLK_GOUT_MISC_DIT_ICLKL2A 14
+#define CLK_GOUT_MISC_D_TZPC_MISC_PCLK 15
+#define CLK_GOUT_MISC_GIC_GICCLK 16
+#define CLK_GOUT_MISC_GPC_MISC_PCLK 17
+#define CLK_GOUT_MISC_LHM_AST_ICC_CPUGIC_I_CLK 18
+#define CLK_GOUT_MISC_LHM_AXI_D_SSS_I_CLK 19
+#define CLK_GOUT_MISC_LHM_AXI_P_GIC_I_CLK 20
+#define CLK_GOUT_MISC_LHM_AXI_P_MISC_I_CLK 21
+#define CLK_GOUT_MISC_LHS_ACEL_D_MISC_I_CLK 22
+#define CLK_GOUT_MISC_LHS_AST_IRI_GICCPU_I_CLK 23
+#define CLK_GOUT_MISC_LHS_AXI_D_SSS_I_CLK 24
+#define CLK_GOUT_MISC_MCT_PCLK 25
+#define CLK_GOUT_MISC_OTP_CON_BIRA_PCLK 26
+#define CLK_GOUT_MISC_OTP_CON_BISR_PCLK 27
+#define CLK_GOUT_MISC_OTP_CON_TOP_PCLK 28
+#define CLK_GOUT_MISC_PDMA_ACLK 29
+#define CLK_GOUT_MISC_PPMU_DMA_ACLK 30
+#define CLK_GOUT_MISC_PPMU_MISC_ACLK 31
+#define CLK_GOUT_MISC_PPMU_MISC_PCLK 32
+#define CLK_GOUT_MISC_PUF_I_CLK 33
+#define CLK_GOUT_MISC_QE_DIT_ACLK 34
+#define CLK_GOUT_MISC_QE_DIT_PCLK 35
+#define CLK_GOUT_MISC_QE_PDMA_ACLK 36
+#define CLK_GOUT_MISC_QE_PDMA_PCLK 37
+#define CLK_GOUT_MISC_QE_PPMU_DMA_ACLK 38
+#define CLK_GOUT_MISC_QE_PPMU_DMA_PCLK 39
+#define CLK_GOUT_MISC_QE_RTIC_ACLK 40
+#define CLK_GOUT_MISC_QE_RTIC_PCLK 41
+#define CLK_GOUT_MISC_QE_SPDMA_ACLK 42
+#define CLK_GOUT_MISC_QE_SPDMA_PCLK 43
+#define CLK_GOUT_MISC_QE_SSS_ACLK 44
+#define CLK_GOUT_MISC_QE_SSS_PCLK 45
+#define CLK_GOUT_MISC_CLK_MISC_BUSD_CLK 46
+#define CLK_GOUT_MISC_CLK_MISC_BUSP_CLK 47
+#define CLK_GOUT_MISC_CLK_MISC_GIC_CLK 48
+#define CLK_GOUT_MISC_CLK_MISC_SSS_CLK 49
+#define CLK_GOUT_MISC_RTIC_I_ACLK 50
+#define CLK_GOUT_MISC_RTIC_I_PCLK 51
+#define CLK_GOUT_MISC_SPDMA_ACLK 52
+#define CLK_GOUT_MISC_SSMT_DIT_ACLK 53
+#define CLK_GOUT_MISC_SSMT_DIT_PCLK 54
+#define CLK_GOUT_MISC_SSMT_PDMA_ACLK 55
+#define CLK_GOUT_MISC_SSMT_PDMA_PCLK 56
+#define CLK_GOUT_MISC_SSMT_PPMU_DMA_ACLK 57
+#define CLK_GOUT_MISC_SSMT_PPMU_DMA_PCLK 58
+#define CLK_GOUT_MISC_SSMT_RTIC_ACLK 59
+#define CLK_GOUT_MISC_SSMT_RTIC_PCLK 60
+#define CLK_GOUT_MISC_SSMT_SPDMA_ACLK 61
+#define CLK_GOUT_MISC_SSMT_SPDMA_PCLK 62
+#define CLK_GOUT_MISC_SSMT_SSS_ACLK 63
+#define CLK_GOUT_MISC_SSMT_SSS_PCLK 64
+#define CLK_GOUT_MISC_SSS_I_ACLK 65
+#define CLK_GOUT_MISC_SSS_I_PCLK 66
+#define CLK_GOUT_MISC_SYSMMU_MISC_CLK_S2 67
+#define CLK_GOUT_MISC_SYSMMU_SSS_CLK_S1 68
+#define CLK_GOUT_MISC_SYSREG_MISC_PCLK 69
+#define CLK_GOUT_MISC_TMU_SUB_PCLK 70
+#define CLK_GOUT_MISC_TMU_TOP_PCLK 71
+#define CLK_GOUT_MISC_WDT_CLUSTER0_PCLK 72
+#define CLK_GOUT_MISC_WDT_CLUSTER1_PCLK 73
+#define CLK_GOUT_MISC_XIU_D_MISC_ACLK 74
+
+#endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ * Author: Xiufeng Li <Xiufeng.Li@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT7988_H
+#define _DT_BINDINGS_CLK_MT7988_H
+
+/* APMIXEDSYS */
+
+#define CLK_APMIXED_NETSYSPLL 0
+#define CLK_APMIXED_MPLL 1
+#define CLK_APMIXED_MMPLL 2
+#define CLK_APMIXED_APLL2 3
+#define CLK_APMIXED_NET1PLL 4
+#define CLK_APMIXED_NET2PLL 5
+#define CLK_APMIXED_WEDMCUPLL 6
+#define CLK_APMIXED_SGMPLL 7
+#define CLK_APMIXED_ARM_B 8
+#define CLK_APMIXED_CCIPLL2_B 9
+#define CLK_APMIXED_USXGMIIPLL 10
+#define CLK_APMIXED_MSDCPLL 11
+
+/* TOPCKGEN */
+
+#define CLK_TOP_XTAL 0
+#define CLK_TOP_XTAL_D2 1
+#define CLK_TOP_RTC_32K 2
+#define CLK_TOP_RTC_32P7K 3
+#define CLK_TOP_MPLL_D2 4
+#define CLK_TOP_MPLL_D3_D2 5
+#define CLK_TOP_MPLL_D4 6
+#define CLK_TOP_MPLL_D8 7
+#define CLK_TOP_MPLL_D8_D2 8
+#define CLK_TOP_MMPLL_D2 9
+#define CLK_TOP_MMPLL_D3_D5 10
+#define CLK_TOP_MMPLL_D4 11
+#define CLK_TOP_MMPLL_D6_D2 12
+#define CLK_TOP_MMPLL_D8 13
+#define CLK_TOP_APLL2_D4 14
+#define CLK_TOP_NET1PLL_D4 15
+#define CLK_TOP_NET1PLL_D5 16
+#define CLK_TOP_NET1PLL_D5_D2 17
+#define CLK_TOP_NET1PLL_D5_D4 18
+#define CLK_TOP_NET1PLL_D8 19
+#define CLK_TOP_NET1PLL_D8_D2 20
+#define CLK_TOP_NET1PLL_D8_D4 21
+#define CLK_TOP_NET1PLL_D8_D8 22
+#define CLK_TOP_NET1PLL_D8_D16 23
+#define CLK_TOP_NET2PLL_D2 24
+#define CLK_TOP_NET2PLL_D4 25
+#define CLK_TOP_NET2PLL_D4_D4 26
+#define CLK_TOP_NET2PLL_D4_D8 27
+#define CLK_TOP_NET2PLL_D6 28
+#define CLK_TOP_NET2PLL_D8 29
+#define CLK_TOP_NETSYS_SEL 30
+#define CLK_TOP_NETSYS_500M_SEL 31
+#define CLK_TOP_NETSYS_2X_SEL 32
+#define CLK_TOP_NETSYS_GSW_SEL 33
+#define CLK_TOP_ETH_GMII_SEL 34
+#define CLK_TOP_NETSYS_MCU_SEL 35
+#define CLK_TOP_NETSYS_PAO_2X_SEL 36
+#define CLK_TOP_EIP197_SEL 37
+#define CLK_TOP_AXI_INFRA_SEL 38
+#define CLK_TOP_UART_SEL 39
+#define CLK_TOP_EMMC_250M_SEL 40
+#define CLK_TOP_EMMC_400M_SEL 41
+#define CLK_TOP_SPI_SEL 42
+#define CLK_TOP_SPIM_MST_SEL 43
+#define CLK_TOP_NFI1X_SEL 44
+#define CLK_TOP_SPINFI_SEL 45
+#define CLK_TOP_PWM_SEL 46
+#define CLK_TOP_I2C_SEL 47
+#define CLK_TOP_PCIE_MBIST_250M_SEL 48
+#define CLK_TOP_PEXTP_TL_SEL 49
+#define CLK_TOP_PEXTP_TL_P1_SEL 50
+#define CLK_TOP_PEXTP_TL_P2_SEL 51
+#define CLK_TOP_PEXTP_TL_P3_SEL 52
+#define CLK_TOP_USB_SYS_SEL 53
+#define CLK_TOP_USB_SYS_P1_SEL 54
+#define CLK_TOP_USB_XHCI_SEL 55
+#define CLK_TOP_USB_XHCI_P1_SEL 56
+#define CLK_TOP_USB_FRMCNT_SEL 57
+#define CLK_TOP_USB_FRMCNT_P1_SEL 58
+#define CLK_TOP_AUD_SEL 59
+#define CLK_TOP_A1SYS_SEL 60
+#define CLK_TOP_AUD_L_SEL 61
+#define CLK_TOP_A_TUNER_SEL 62
+#define CLK_TOP_SSPXTP_SEL 63
+#define CLK_TOP_USB_PHY_SEL 64
+#define CLK_TOP_USXGMII_SBUS_0_SEL 65
+#define CLK_TOP_USXGMII_SBUS_1_SEL 66
+#define CLK_TOP_SGM_0_SEL 67
+#define CLK_TOP_SGM_SBUS_0_SEL 68
+#define CLK_TOP_SGM_1_SEL 69
+#define CLK_TOP_SGM_SBUS_1_SEL 70
+#define CLK_TOP_XFI_PHY_0_XTAL_SEL 71
+#define CLK_TOP_XFI_PHY_1_XTAL_SEL 72
+#define CLK_TOP_SYSAXI_SEL 73
+#define CLK_TOP_SYSAPB_SEL 74
+#define CLK_TOP_ETH_REFCK_50M_SEL 75
+#define CLK_TOP_ETH_SYS_200M_SEL 76
+#define CLK_TOP_ETH_SYS_SEL 77
+#define CLK_TOP_ETH_XGMII_SEL 78
+#define CLK_TOP_BUS_TOPS_SEL 79
+#define CLK_TOP_NPU_TOPS_SEL 80
+#define CLK_TOP_DRAMC_SEL 81
+#define CLK_TOP_DRAMC_MD32_SEL 82
+#define CLK_TOP_INFRA_F26M_SEL 83
+#define CLK_TOP_PEXTP_P0_SEL 84
+#define CLK_TOP_PEXTP_P1_SEL 85
+#define CLK_TOP_PEXTP_P2_SEL 86
+#define CLK_TOP_PEXTP_P3_SEL 87
+#define CLK_TOP_DA_XTP_GLB_P0_SEL 88
+#define CLK_TOP_DA_XTP_GLB_P1_SEL 89
+#define CLK_TOP_DA_XTP_GLB_P2_SEL 90
+#define CLK_TOP_DA_XTP_GLB_P3_SEL 91
+#define CLK_TOP_CKM_SEL 92
+#define CLK_TOP_DA_SEL 93
+#define CLK_TOP_PEXTP_SEL 94
+#define CLK_TOP_TOPS_P2_26M_SEL 95
+#define CLK_TOP_MCUSYS_BACKUP_625M_SEL 96
+#define CLK_TOP_NETSYS_SYNC_250M_SEL 97
+#define CLK_TOP_MACSEC_SEL 98
+#define CLK_TOP_NETSYS_TOPS_400M_SEL 99
+#define CLK_TOP_NETSYS_PPEFB_250M_SEL 100
+#define CLK_TOP_NETSYS_WARP_SEL 101
+#define CLK_TOP_ETH_MII_SEL 102
+#define CLK_TOP_NPU_SEL 103
+#define CLK_TOP_AUD_I2S_M 104
+
+/* MCUSYS */
+
+#define CLK_MCU_BUS_DIV_SEL 0
+#define CLK_MCU_ARM_DIV_SEL 1
+
+/* INFRACFG_AO */
+
+#define CLK_INFRA_MUX_UART0_SEL 0
+#define CLK_INFRA_MUX_UART1_SEL 1
+#define CLK_INFRA_MUX_UART2_SEL 2
+#define CLK_INFRA_MUX_SPI0_SEL 3
+#define CLK_INFRA_MUX_SPI1_SEL 4
+#define CLK_INFRA_MUX_SPI2_SEL 5
+#define CLK_INFRA_PWM_SEL 6
+#define CLK_INFRA_PWM_CK1_SEL 7
+#define CLK_INFRA_PWM_CK2_SEL 8
+#define CLK_INFRA_PWM_CK3_SEL 9
+#define CLK_INFRA_PWM_CK4_SEL 10
+#define CLK_INFRA_PWM_CK5_SEL 11
+#define CLK_INFRA_PWM_CK6_SEL 12
+#define CLK_INFRA_PWM_CK7_SEL 13
+#define CLK_INFRA_PWM_CK8_SEL 14
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL 15
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL 16
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL 17
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL 18
+
+/* INFRACFG */
+
+#define CLK_INFRA_PCIE_PERI_26M_CK_P0 19
+#define CLK_INFRA_PCIE_PERI_26M_CK_P1 20
+#define CLK_INFRA_PCIE_PERI_26M_CK_P2 21
+#define CLK_INFRA_PCIE_PERI_26M_CK_P3 22
+#define CLK_INFRA_66M_GPT_BCK 23
+#define CLK_INFRA_66M_PWM_HCK 24
+#define CLK_INFRA_66M_PWM_BCK 25
+#define CLK_INFRA_66M_PWM_CK1 26
+#define CLK_INFRA_66M_PWM_CK2 27
+#define CLK_INFRA_66M_PWM_CK3 28
+#define CLK_INFRA_66M_PWM_CK4 29
+#define CLK_INFRA_66M_PWM_CK5 30
+#define CLK_INFRA_66M_PWM_CK6 31
+#define CLK_INFRA_66M_PWM_CK7 32
+#define CLK_INFRA_66M_PWM_CK8 33
+#define CLK_INFRA_133M_CQDMA_BCK 34
+#define CLK_INFRA_66M_AUD_SLV_BCK 35
+#define CLK_INFRA_AUD_26M 36
+#define CLK_INFRA_AUD_L 37
+#define CLK_INFRA_AUD_AUD 38
+#define CLK_INFRA_AUD_EG2 39
+#define CLK_INFRA_DRAMC_F26M 40
+#define CLK_INFRA_133M_DBG_ACKM 41
+#define CLK_INFRA_66M_AP_DMA_BCK 42
+#define CLK_INFRA_66M_SEJ_BCK 43
+#define CLK_INFRA_PRE_CK_SEJ_F13M 44
+#define CLK_INFRA_26M_THERM_SYSTEM 45
+#define CLK_INFRA_I2C_BCK 46
+#define CLK_INFRA_52M_UART0_CK 47
+#define CLK_INFRA_52M_UART1_CK 48
+#define CLK_INFRA_52M_UART2_CK 49
+#define CLK_INFRA_NFI 50
+#define CLK_INFRA_SPINFI 51
+#define CLK_INFRA_66M_NFI_HCK 52
+#define CLK_INFRA_104M_SPI0 53
+#define CLK_INFRA_104M_SPI1 54
+#define CLK_INFRA_104M_SPI2_BCK 55
+#define CLK_INFRA_66M_SPI0_HCK 56
+#define CLK_INFRA_66M_SPI1_HCK 57
+#define CLK_INFRA_66M_SPI2_HCK 58
+#define CLK_INFRA_66M_FLASHIF_AXI 59
+#define CLK_INFRA_RTC 60
+#define CLK_INFRA_26M_ADC_BCK 61
+#define CLK_INFRA_RC_ADC 62
+#define CLK_INFRA_MSDC400 63
+#define CLK_INFRA_MSDC2_HCK 64
+#define CLK_INFRA_133M_MSDC_0_HCK 65
+#define CLK_INFRA_66M_MSDC_0_HCK 66
+#define CLK_INFRA_133M_CPUM_BCK 67
+#define CLK_INFRA_BIST2FPC 68
+#define CLK_INFRA_I2C_X16W_MCK_CK_P1 69
+#define CLK_INFRA_I2C_X16W_PCK_CK_P1 70
+#define CLK_INFRA_133M_USB_HCK 71
+#define CLK_INFRA_133M_USB_HCK_CK_P1 72
+#define CLK_INFRA_66M_USB_HCK 73
+#define CLK_INFRA_66M_USB_HCK_CK_P1 74
+#define CLK_INFRA_USB_SYS 75
+#define CLK_INFRA_USB_SYS_CK_P1 76
+#define CLK_INFRA_USB_REF 77
+#define CLK_INFRA_USB_CK_P1 78
+#define CLK_INFRA_USB_FRMCNT 79
+#define CLK_INFRA_USB_FRMCNT_CK_P1 80
+#define CLK_INFRA_USB_PIPE 81
+#define CLK_INFRA_USB_PIPE_CK_P1 82
+#define CLK_INFRA_USB_UTMI 83
+#define CLK_INFRA_USB_UTMI_CK_P1 84
+#define CLK_INFRA_USB_XHCI 85
+#define CLK_INFRA_USB_XHCI_CK_P1 86
+#define CLK_INFRA_PCIE_GFMUX_TL_P0 87
+#define CLK_INFRA_PCIE_GFMUX_TL_P1 88
+#define CLK_INFRA_PCIE_GFMUX_TL_P2 89
+#define CLK_INFRA_PCIE_GFMUX_TL_P3 90
+#define CLK_INFRA_PCIE_PIPE_P0 91
+#define CLK_INFRA_PCIE_PIPE_P1 92
+#define CLK_INFRA_PCIE_PIPE_P2 93
+#define CLK_INFRA_PCIE_PIPE_P3 94
+#define CLK_INFRA_133M_PCIE_CK_P0 95
+#define CLK_INFRA_133M_PCIE_CK_P1 96
+#define CLK_INFRA_133M_PCIE_CK_P2 97
+#define CLK_INFRA_133M_PCIE_CK_P3 98
+
+/* ETHDMA */
+
+#define CLK_ETHDMA_XGP1_EN 0
+#define CLK_ETHDMA_XGP2_EN 1
+#define CLK_ETHDMA_XGP3_EN 2
+#define CLK_ETHDMA_FE_EN 3
+#define CLK_ETHDMA_GP2_EN 4
+#define CLK_ETHDMA_GP1_EN 5
+#define CLK_ETHDMA_GP3_EN 6
+#define CLK_ETHDMA_ESW_EN 7
+#define CLK_ETHDMA_CRYPT0_EN 8
+#define CLK_ETHDMA_NR_CLK 9
+
+/* SGMIISYS_0 */
+
+#define CLK_SGM0_TX_EN 0
+#define CLK_SGM0_RX_EN 1
+#define CLK_SGMII0_NR_CLK 2
+
+/* SGMIISYS_1 */
+
+#define CLK_SGM1_TX_EN 0
+#define CLK_SGM1_RX_EN 1
+#define CLK_SGMII1_NR_CLK 2
+
+/* ETHWARP */
+
+#define CLK_ETHWARP_WOCPU2_EN 0
+#define CLK_ETHWARP_WOCPU1_EN 1
+#define CLK_ETHWARP_WOCPU0_EN 2
+#define CLK_ETHWARP_NR_CLK 3
+
+/* XFIPLL */
+#define CLK_XFIPLL_PLL 0
+#define CLK_XFIPLL_PLL_EN 1
+
+#endif /* _DT_BINDINGS_CLK_MT7988_H */
#define GCC_VENUS0_CORE1_VCODEC0_CLK 184
#define GCC_OXILI_TIMER_CLK 185
#define SYSTEM_MM_NOC_BFDCD_CLK_SRC 186
+#define CSI2_CLK_SRC 187
+#define GCC_CAMSS_CSI2_AHB_CLK 188
+#define GCC_CAMSS_CSI2_CLK 189
+#define GCC_CAMSS_CSI2PHY_CLK 190
+#define GCC_CAMSS_CSI2PIX_CLK 191
+#define GCC_CAMSS_CSI2RDI_CLK 192
/* Indexes for GDSCs */
#define BIMC_GDSC 0
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_ECPRI_CC_QDU1000_H
+#define _DT_BINDINGS_CLK_QCOM_ECPRI_CC_QDU1000_H
+
+/* ECPRI_CC clocks */
+#define ECPRI_CC_PLL0 0
+#define ECPRI_CC_PLL1 1
+#define ECPRI_CC_ECPRI_CG_CLK 2
+#define ECPRI_CC_ECPRI_CLK_SRC 3
+#define ECPRI_CC_ECPRI_DMA_CLK 4
+#define ECPRI_CC_ECPRI_DMA_CLK_SRC 5
+#define ECPRI_CC_ECPRI_DMA_NOC_CLK 6
+#define ECPRI_CC_ECPRI_FAST_CLK 7
+#define ECPRI_CC_ECPRI_FAST_CLK_SRC 8
+#define ECPRI_CC_ECPRI_FAST_DIV2_CLK 9
+#define ECPRI_CC_ECPRI_FAST_DIV2_CLK_SRC 10
+#define ECPRI_CC_ECPRI_FAST_DIV2_NOC_CLK 11
+#define ECPRI_CC_ECPRI_FR_CLK 12
+#define ECPRI_CC_ECPRI_ORAN_CLK_SRC 13
+#define ECPRI_CC_ECPRI_ORAN_DIV2_CLK 14
+#define ECPRI_CC_ETH_100G_C2C0_HM_FF_CLK_SRC 15
+#define ECPRI_CC_ETH_100G_C2C0_UDP_FIFO_CLK 16
+#define ECPRI_CC_ETH_100G_C2C1_UDP_FIFO_CLK 17
+#define ECPRI_CC_ETH_100G_C2C_0_HM_FF_0_CLK 18
+#define ECPRI_CC_ETH_100G_C2C_0_HM_FF_1_CLK 19
+#define ECPRI_CC_ETH_100G_C2C_HM_FF_0_DIV_CLK_SRC 20
+#define ECPRI_CC_ETH_100G_C2C_HM_FF_1_DIV_CLK_SRC 21
+#define ECPRI_CC_ETH_100G_C2C_HM_MACSEC_CLK 22
+#define ECPRI_CC_ETH_100G_C2C_HM_MACSEC_CLK_SRC 23
+#define ECPRI_CC_ETH_100G_DBG_C2C_HM_FF_0_CLK 24
+#define ECPRI_CC_ETH_100G_DBG_C2C_HM_FF_0_DIV_CLK_SRC 25
+#define ECPRI_CC_ETH_100G_DBG_C2C_HM_FF_1_CLK 26
+#define ECPRI_CC_ETH_100G_DBG_C2C_HM_FF_1_DIV_CLK_SRC 27
+#define ECPRI_CC_ETH_100G_DBG_C2C_HM_FF_CLK_SRC 28
+#define ECPRI_CC_ETH_100G_DBG_C2C_UDP_FIFO_CLK 29
+#define ECPRI_CC_ETH_100G_FH0_HM_FF_CLK_SRC 30
+#define ECPRI_CC_ETH_100G_FH0_MACSEC_CLK_SRC 31
+#define ECPRI_CC_ETH_100G_FH1_HM_FF_CLK_SRC 32
+#define ECPRI_CC_ETH_100G_FH1_MACSEC_CLK_SRC 33
+#define ECPRI_CC_ETH_100G_FH2_HM_FF_CLK_SRC 34
+#define ECPRI_CC_ETH_100G_FH2_MACSEC_CLK_SRC 35
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_0_CLK 36
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_0_DIV_CLK_SRC 37
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_1_CLK 38
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_1_DIV_CLK_SRC 39
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_2_CLK 40
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_2_DIV_CLK_SRC 41
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_3_CLK 42
+#define ECPRI_CC_ETH_100G_FH_0_HM_FF_3_DIV_CLK_SRC 43
+#define ECPRI_CC_ETH_100G_FH_0_UDP_FIFO_CLK 44
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_0_CLK 45
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_0_DIV_CLK_SRC 46
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_1_CLK 47
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_1_DIV_CLK_SRC 48
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_2_CLK 49
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_2_DIV_CLK_SRC 50
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_3_CLK 51
+#define ECPRI_CC_ETH_100G_FH_1_HM_FF_3_DIV_CLK_SRC 52
+#define ECPRI_CC_ETH_100G_FH_1_UDP_FIFO_CLK 53
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_0_CLK 54
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_0_DIV_CLK_SRC 55
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_1_CLK 56
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_1_DIV_CLK_SRC 57
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_2_CLK 58
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_2_DIV_CLK_SRC 59
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_3_CLK 60
+#define ECPRI_CC_ETH_100G_FH_2_HM_FF_3_DIV_CLK_SRC 61
+#define ECPRI_CC_ETH_100G_FH_2_UDP_FIFO_CLK 62
+#define ECPRI_CC_ETH_100G_FH_MACSEC_0_CLK 63
+#define ECPRI_CC_ETH_100G_FH_MACSEC_1_CLK 64
+#define ECPRI_CC_ETH_100G_FH_MACSEC_2_CLK 65
+#define ECPRI_CC_ETH_100G_MAC_C2C_HM_REF_CLK 66
+#define ECPRI_CC_ETH_100G_MAC_C2C_HM_REF_CLK_SRC 67
+#define ECPRI_CC_ETH_100G_MAC_DBG_C2C_HM_REF_CLK 68
+#define ECPRI_CC_ETH_100G_MAC_DBG_C2C_HM_REF_CLK_SRC 69
+#define ECPRI_CC_ETH_100G_MAC_FH0_HM_REF_CLK 70
+#define ECPRI_CC_ETH_100G_MAC_FH0_HM_REF_CLK_SRC 71
+#define ECPRI_CC_ETH_100G_MAC_FH1_HM_REF_CLK 72
+#define ECPRI_CC_ETH_100G_MAC_FH1_HM_REF_CLK_SRC 73
+#define ECPRI_CC_ETH_100G_MAC_FH2_HM_REF_CLK 74
+#define ECPRI_CC_ETH_100G_MAC_FH2_HM_REF_CLK_SRC 75
+#define ECPRI_CC_ETH_DBG_NFAPI_AXI_CLK 76
+#define ECPRI_CC_ETH_DBG_NOC_AXI_CLK 77
+#define ECPRI_CC_ETH_PHY_0_OCK_SRAM_CLK 78
+#define ECPRI_CC_ETH_PHY_1_OCK_SRAM_CLK 79
+#define ECPRI_CC_ETH_PHY_2_OCK_SRAM_CLK 80
+#define ECPRI_CC_ETH_PHY_3_OCK_SRAM_CLK 81
+#define ECPRI_CC_ETH_PHY_4_OCK_SRAM_CLK 82
+#define ECPRI_CC_MSS_EMAC_CLK 83
+#define ECPRI_CC_MSS_EMAC_CLK_SRC 84
+#define ECPRI_CC_MSS_ORAN_CLK 85
+#define ECPRI_CC_PHY0_LANE0_RX_CLK 86
+#define ECPRI_CC_PHY0_LANE0_TX_CLK 87
+#define ECPRI_CC_PHY0_LANE1_RX_CLK 88
+#define ECPRI_CC_PHY0_LANE1_TX_CLK 89
+#define ECPRI_CC_PHY0_LANE2_RX_CLK 90
+#define ECPRI_CC_PHY0_LANE2_TX_CLK 91
+#define ECPRI_CC_PHY0_LANE3_RX_CLK 92
+#define ECPRI_CC_PHY0_LANE3_TX_CLK 93
+#define ECPRI_CC_PHY1_LANE0_RX_CLK 94
+#define ECPRI_CC_PHY1_LANE0_TX_CLK 95
+#define ECPRI_CC_PHY1_LANE1_RX_CLK 96
+#define ECPRI_CC_PHY1_LANE1_TX_CLK 97
+#define ECPRI_CC_PHY1_LANE2_RX_CLK 98
+#define ECPRI_CC_PHY1_LANE2_TX_CLK 99
+#define ECPRI_CC_PHY1_LANE3_RX_CLK 100
+#define ECPRI_CC_PHY1_LANE3_TX_CLK 101
+#define ECPRI_CC_PHY2_LANE0_RX_CLK 102
+#define ECPRI_CC_PHY2_LANE0_TX_CLK 103
+#define ECPRI_CC_PHY2_LANE1_RX_CLK 104
+#define ECPRI_CC_PHY2_LANE1_TX_CLK 105
+#define ECPRI_CC_PHY2_LANE2_RX_CLK 106
+#define ECPRI_CC_PHY2_LANE2_TX_CLK 107
+#define ECPRI_CC_PHY2_LANE3_RX_CLK 108
+#define ECPRI_CC_PHY2_LANE3_TX_CLK 109
+#define ECPRI_CC_PHY3_LANE0_RX_CLK 110
+#define ECPRI_CC_PHY3_LANE0_TX_CLK 111
+#define ECPRI_CC_PHY3_LANE1_RX_CLK 112
+#define ECPRI_CC_PHY3_LANE1_TX_CLK 113
+#define ECPRI_CC_PHY3_LANE2_RX_CLK 114
+#define ECPRI_CC_PHY3_LANE2_TX_CLK 115
+#define ECPRI_CC_PHY3_LANE3_RX_CLK 116
+#define ECPRI_CC_PHY3_LANE3_TX_CLK 117
+#define ECPRI_CC_PHY4_LANE0_RX_CLK 118
+#define ECPRI_CC_PHY4_LANE0_TX_CLK 119
+#define ECPRI_CC_PHY4_LANE1_RX_CLK 120
+#define ECPRI_CC_PHY4_LANE1_TX_CLK 121
+#define ECPRI_CC_PHY4_LANE2_RX_CLK 122
+#define ECPRI_CC_PHY4_LANE2_TX_CLK 123
+#define ECPRI_CC_PHY4_LANE3_RX_CLK 124
+#define ECPRI_CC_PHY4_LANE3_TX_CLK 125
+
+/* ECPRI_CC resets */
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ECPRI_SS_BCR 0
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ETH_C2C_BCR 1
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ETH_FH0_BCR 2
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ETH_FH1_BCR 3
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ETH_FH2_BCR 4
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_ETH_WRAPPER_TOP_BCR 5
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_MODEM_BCR 6
+#define ECPRI_CC_CLK_CTL_TOP_ECPRI_CC_NOC_BCR 7
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#ifndef __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__
+#define __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__
+
+/* CAMCC clocks */
+#define CAMCC_PLL0 0
+#define CAMCC_PLL0_OUT_EVEN 1
+#define CAMCC_PLL0_OUT_ODD 2
+#define CAMCC_PLL1 3
+#define CAMCC_PLL1_OUT_EVEN 4
+#define CAMCC_PLL2 5
+#define CAMCC_PLL3 6
+#define CAMCC_PLL3_OUT_EVEN 7
+#define CAMCC_PLL4 8
+#define CAMCC_PLL4_OUT_EVEN 9
+#define CAMCC_PLL5 10
+#define CAMCC_PLL5_OUT_EVEN 11
+#define CAMCC_PLL6 12
+#define CAMCC_PLL6_OUT_EVEN 13
+#define CAMCC_PLL7 14
+#define CAMCC_PLL7_OUT_EVEN 15
+#define CAMCC_PLL7_OUT_ODD 16
+#define CAMCC_BPS_AHB_CLK 17
+#define CAMCC_BPS_AREG_CLK 18
+#define CAMCC_BPS_AXI_CLK 19
+#define CAMCC_BPS_CLK 20
+#define CAMCC_BPS_CLK_SRC 21
+#define CAMCC_CAMNOC_AXI_CLK 22
+#define CAMCC_CAMNOC_AXI_CLK_SRC 23
+#define CAMCC_CAMNOC_DCD_XO_CLK 24
+#define CAMCC_CCI_0_CLK 25
+#define CAMCC_CCI_0_CLK_SRC 26
+#define CAMCC_CCI_1_CLK 27
+#define CAMCC_CCI_1_CLK_SRC 28
+#define CAMCC_CCI_2_CLK 29
+#define CAMCC_CCI_2_CLK_SRC 30
+#define CAMCC_CCI_3_CLK 31
+#define CAMCC_CCI_3_CLK_SRC 32
+#define CAMCC_CORE_AHB_CLK 33
+#define CAMCC_CPAS_AHB_CLK 34
+#define CAMCC_CPHY_RX_CLK_SRC 35
+#define CAMCC_CSI0PHYTIMER_CLK 36
+#define CAMCC_CSI0PHYTIMER_CLK_SRC 37
+#define CAMCC_CSI1PHYTIMER_CLK 38
+#define CAMCC_CSI1PHYTIMER_CLK_SRC 39
+#define CAMCC_CSI2PHYTIMER_CLK 40
+#define CAMCC_CSI2PHYTIMER_CLK_SRC 41
+#define CAMCC_CSI3PHYTIMER_CLK 42
+#define CAMCC_CSI3PHYTIMER_CLK_SRC 43
+#define CAMCC_CSIPHY0_CLK 44
+#define CAMCC_CSIPHY1_CLK 45
+#define CAMCC_CSIPHY2_CLK 46
+#define CAMCC_CSIPHY3_CLK 47
+#define CAMCC_FAST_AHB_CLK_SRC 48
+#define CAMCC_GDSC_CLK 49
+#define CAMCC_ICP_AHB_CLK 50
+#define CAMCC_ICP_CLK 51
+#define CAMCC_ICP_CLK_SRC 52
+#define CAMCC_IFE_0_AXI_CLK 53
+#define CAMCC_IFE_0_CLK 54
+#define CAMCC_IFE_0_CLK_SRC 55
+#define CAMCC_IFE_0_CPHY_RX_CLK 56
+#define CAMCC_IFE_0_CSID_CLK 57
+#define CAMCC_IFE_0_CSID_CLK_SRC 58
+#define CAMCC_IFE_0_DSP_CLK 59
+#define CAMCC_IFE_1_AXI_CLK 60
+#define CAMCC_IFE_1_CLK 61
+#define CAMCC_IFE_1_CLK_SRC 62
+#define CAMCC_IFE_1_CPHY_RX_CLK 63
+#define CAMCC_IFE_1_CSID_CLK 64
+#define CAMCC_IFE_1_CSID_CLK_SRC 65
+#define CAMCC_IFE_1_DSP_CLK 66
+#define CAMCC_IFE_2_AXI_CLK 67
+#define CAMCC_IFE_2_CLK 68
+#define CAMCC_IFE_2_CLK_SRC 69
+#define CAMCC_IFE_2_CPHY_RX_CLK 70
+#define CAMCC_IFE_2_CSID_CLK 71
+#define CAMCC_IFE_2_CSID_CLK_SRC 72
+#define CAMCC_IFE_2_DSP_CLK 73
+#define CAMCC_IFE_3_AXI_CLK 74
+#define CAMCC_IFE_3_CLK 75
+#define CAMCC_IFE_3_CLK_SRC 76
+#define CAMCC_IFE_3_CPHY_RX_CLK 77
+#define CAMCC_IFE_3_CSID_CLK 78
+#define CAMCC_IFE_3_CSID_CLK_SRC 79
+#define CAMCC_IFE_3_DSP_CLK 80
+#define CAMCC_IFE_LITE_0_CLK 81
+#define CAMCC_IFE_LITE_0_CLK_SRC 82
+#define CAMCC_IFE_LITE_0_CPHY_RX_CLK 83
+#define CAMCC_IFE_LITE_0_CSID_CLK 84
+#define CAMCC_IFE_LITE_0_CSID_CLK_SRC 85
+#define CAMCC_IFE_LITE_1_CLK 86
+#define CAMCC_IFE_LITE_1_CLK_SRC 87
+#define CAMCC_IFE_LITE_1_CPHY_RX_CLK 88
+#define CAMCC_IFE_LITE_1_CSID_CLK 89
+#define CAMCC_IFE_LITE_1_CSID_CLK_SRC 90
+#define CAMCC_IFE_LITE_2_CLK 91
+#define CAMCC_IFE_LITE_2_CLK_SRC 92
+#define CAMCC_IFE_LITE_2_CPHY_RX_CLK 93
+#define CAMCC_IFE_LITE_2_CSID_CLK 94
+#define CAMCC_IFE_LITE_2_CSID_CLK_SRC 95
+#define CAMCC_IFE_LITE_3_CLK 96
+#define CAMCC_IFE_LITE_3_CLK_SRC 97
+#define CAMCC_IFE_LITE_3_CPHY_RX_CLK 98
+#define CAMCC_IFE_LITE_3_CSID_CLK 99
+#define CAMCC_IFE_LITE_3_CSID_CLK_SRC 100
+#define CAMCC_IPE_0_AHB_CLK 101
+#define CAMCC_IPE_0_AREG_CLK 102
+#define CAMCC_IPE_0_AXI_CLK 103
+#define CAMCC_IPE_0_CLK 104
+#define CAMCC_IPE_0_CLK_SRC 105
+#define CAMCC_IPE_1_AHB_CLK 106
+#define CAMCC_IPE_1_AREG_CLK 107
+#define CAMCC_IPE_1_AXI_CLK 108
+#define CAMCC_IPE_1_CLK 109
+#define CAMCC_JPEG_CLK 110
+#define CAMCC_JPEG_CLK_SRC 111
+#define CAMCC_LRME_CLK 112
+#define CAMCC_LRME_CLK_SRC 113
+#define CAMCC_MCLK0_CLK 114
+#define CAMCC_MCLK0_CLK_SRC 115
+#define CAMCC_MCLK1_CLK 116
+#define CAMCC_MCLK1_CLK_SRC 117
+#define CAMCC_MCLK2_CLK 118
+#define CAMCC_MCLK2_CLK_SRC 119
+#define CAMCC_MCLK3_CLK 120
+#define CAMCC_MCLK3_CLK_SRC 121
+#define CAMCC_MCLK4_CLK 122
+#define CAMCC_MCLK4_CLK_SRC 123
+#define CAMCC_MCLK5_CLK 124
+#define CAMCC_MCLK5_CLK_SRC 125
+#define CAMCC_MCLK6_CLK 126
+#define CAMCC_MCLK6_CLK_SRC 127
+#define CAMCC_MCLK7_CLK 128
+#define CAMCC_MCLK7_CLK_SRC 129
+#define CAMCC_SLEEP_CLK 130
+#define CAMCC_SLEEP_CLK_SRC 131
+#define CAMCC_SLOW_AHB_CLK_SRC 132
+#define CAMCC_XO_CLK_SRC 133
+
+/* CAMCC resets */
+#define CAMCC_BPS_BCR 0
+#define CAMCC_CAMNOC_BCR 1
+#define CAMCC_CCI_BCR 2
+#define CAMCC_CPAS_BCR 3
+#define CAMCC_CSI0PHY_BCR 4
+#define CAMCC_CSI1PHY_BCR 5
+#define CAMCC_CSI2PHY_BCR 6
+#define CAMCC_CSI3PHY_BCR 7
+#define CAMCC_ICP_BCR 8
+#define CAMCC_IFE_0_BCR 9
+#define CAMCC_IFE_1_BCR 10
+#define CAMCC_IFE_2_BCR 11
+#define CAMCC_IFE_3_BCR 12
+#define CAMCC_IFE_LITE_0_BCR 13
+#define CAMCC_IFE_LITE_1_BCR 14
+#define CAMCC_IFE_LITE_2_BCR 15
+#define CAMCC_IFE_LITE_3_BCR 16
+#define CAMCC_IPE_0_BCR 17
+#define CAMCC_IPE_1_BCR 18
+#define CAMCC_JPEG_BCR 19
+#define CAMCC_LRME_BCR 20
+
+/* CAMCC GDSCRs */
+#define BPS_GDSC 0
+#define IFE_0_GDSC 1
+#define IFE_1_GDSC 2
+#define IFE_2_GDSC 3
+#define IFE_3_GDSC 4
+#define IPE_0_GDSC 5
+#define IPE_1_GDSC 6
+#define TITAN_TOP_GDSC 7
+
+#endif /* __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H
+#define _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H
+
+/* DISP_CC clocks */
+#define DISP_CC_MDSS_ACCU_CLK 0
+#define DISP_CC_MDSS_AHB1_CLK 1
+#define DISP_CC_MDSS_AHB_CLK 2
+#define DISP_CC_MDSS_AHB_CLK_SRC 3
+#define DISP_CC_MDSS_BYTE0_CLK 4
+#define DISP_CC_MDSS_BYTE0_CLK_SRC 5
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 6
+#define DISP_CC_MDSS_BYTE0_INTF_CLK 7
+#define DISP_CC_MDSS_BYTE1_CLK 8
+#define DISP_CC_MDSS_BYTE1_CLK_SRC 9
+#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 10
+#define DISP_CC_MDSS_BYTE1_INTF_CLK 11
+#define DISP_CC_MDSS_DPTX0_AUX_CLK 12
+#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC 13
+#define DISP_CC_MDSS_DPTX0_CRYPTO_CLK 14
+#define DISP_CC_MDSS_DPTX0_LINK_CLK 15
+#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC 16
+#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC 17
+#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK 18
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK 19
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC 20
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK 21
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC 22
+#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK 23
+#define DISP_CC_MDSS_DPTX1_AUX_CLK 24
+#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC 25
+#define DISP_CC_MDSS_DPTX1_CRYPTO_CLK 26
+#define DISP_CC_MDSS_DPTX1_LINK_CLK 27
+#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC 28
+#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC 29
+#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK 30
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK 31
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC 32
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK 33
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC 34
+#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK 35
+#define DISP_CC_MDSS_DPTX2_AUX_CLK 36
+#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC 37
+#define DISP_CC_MDSS_DPTX2_CRYPTO_CLK 38
+#define DISP_CC_MDSS_DPTX2_LINK_CLK 39
+#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC 40
+#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC 41
+#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK 42
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK 43
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC 44
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK 45
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC 46
+#define DISP_CC_MDSS_DPTX3_AUX_CLK 47
+#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC 48
+#define DISP_CC_MDSS_DPTX3_CRYPTO_CLK 49
+#define DISP_CC_MDSS_DPTX3_LINK_CLK 50
+#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC 51
+#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC 52
+#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK 53
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK 54
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC 55
+#define DISP_CC_MDSS_ESC0_CLK 56
+#define DISP_CC_MDSS_ESC0_CLK_SRC 57
+#define DISP_CC_MDSS_ESC1_CLK 58
+#define DISP_CC_MDSS_ESC1_CLK_SRC 59
+#define DISP_CC_MDSS_MDP1_CLK 60
+#define DISP_CC_MDSS_MDP_CLK 61
+#define DISP_CC_MDSS_MDP_CLK_SRC 62
+#define DISP_CC_MDSS_MDP_LUT1_CLK 63
+#define DISP_CC_MDSS_MDP_LUT_CLK 64
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 65
+#define DISP_CC_MDSS_PCLK0_CLK 66
+#define DISP_CC_MDSS_PCLK0_CLK_SRC 67
+#define DISP_CC_MDSS_PCLK1_CLK 68
+#define DISP_CC_MDSS_PCLK1_CLK_SRC 69
+#define DISP_CC_MDSS_RSCC_AHB_CLK 70
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK 71
+#define DISP_CC_MDSS_VSYNC1_CLK 72
+#define DISP_CC_MDSS_VSYNC_CLK 73
+#define DISP_CC_MDSS_VSYNC_CLK_SRC 74
+#define DISP_CC_PLL0 75
+#define DISP_CC_PLL1 76
+#define DISP_CC_SLEEP_CLK 77
+#define DISP_CC_SLEEP_CLK_SRC 78
+#define DISP_CC_XO_CLK 79
+#define DISP_CC_XO_CLK_SRC 80
+
+/* DISP_CC resets */
+#define DISP_CC_MDSS_CORE_BCR 0
+#define DISP_CC_MDSS_CORE_INT2_BCR 1
+#define DISP_CC_MDSS_RSCC_BCR 2
+
+/* DISP_CC GDSCR */
+#define MDSS_GDSC 0
+#define MDSS_INT2_GDSC 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SM8650_H
+
+/* GCC clocks */
+#define GCC_AGGRE_NOC_PCIE_AXI_CLK 0
+#define GCC_AGGRE_UFS_PHY_AXI_CLK 1
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 2
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK 3
+#define GCC_BOOT_ROM_AHB_CLK 4
+#define GCC_CAMERA_AHB_CLK 5
+#define GCC_CAMERA_HF_AXI_CLK 6
+#define GCC_CAMERA_SF_AXI_CLK 7
+#define GCC_CAMERA_XO_CLK 8
+#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 9
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 10
+#define GCC_CNOC_PCIE_SF_AXI_CLK 11
+#define GCC_DDRSS_GPU_AXI_CLK 12
+#define GCC_DDRSS_PCIE_SF_QTB_CLK 13
+#define GCC_DISP_AHB_CLK 14
+#define GCC_DISP_HF_AXI_CLK 15
+#define GCC_DISP_XO_CLK 16
+#define GCC_GP1_CLK 17
+#define GCC_GP1_CLK_SRC 18
+#define GCC_GP2_CLK 19
+#define GCC_GP2_CLK_SRC 20
+#define GCC_GP3_CLK 21
+#define GCC_GP3_CLK_SRC 22
+#define GCC_GPLL0 23
+#define GCC_GPLL0_OUT_EVEN 24
+#define GCC_GPLL1 25
+#define GCC_GPLL3 26
+#define GCC_GPLL4 27
+#define GCC_GPLL6 28
+#define GCC_GPLL7 29
+#define GCC_GPLL9 30
+#define GCC_GPU_CFG_AHB_CLK 31
+#define GCC_GPU_GPLL0_CLK_SRC 32
+#define GCC_GPU_GPLL0_DIV_CLK_SRC 33
+#define GCC_GPU_MEMNOC_GFX_CLK 34
+#define GCC_GPU_SNOC_DVM_GFX_CLK 35
+#define GCC_PCIE_0_AUX_CLK 36
+#define GCC_PCIE_0_AUX_CLK_SRC 37
+#define GCC_PCIE_0_CFG_AHB_CLK 38
+#define GCC_PCIE_0_MSTR_AXI_CLK 39
+#define GCC_PCIE_0_PHY_RCHNG_CLK 40
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 41
+#define GCC_PCIE_0_PIPE_CLK 42
+#define GCC_PCIE_0_PIPE_CLK_SRC 43
+#define GCC_PCIE_0_SLV_AXI_CLK 44
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 45
+#define GCC_PCIE_1_AUX_CLK 46
+#define GCC_PCIE_1_AUX_CLK_SRC 47
+#define GCC_PCIE_1_CFG_AHB_CLK 48
+#define GCC_PCIE_1_MSTR_AXI_CLK 49
+#define GCC_PCIE_1_PHY_AUX_CLK 50
+#define GCC_PCIE_1_PHY_AUX_CLK_SRC 51
+#define GCC_PCIE_1_PHY_RCHNG_CLK 52
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 53
+#define GCC_PCIE_1_PIPE_CLK 54
+#define GCC_PCIE_1_PIPE_CLK_SRC 55
+#define GCC_PCIE_1_SLV_AXI_CLK 56
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 57
+#define GCC_PDM2_CLK 58
+#define GCC_PDM2_CLK_SRC 59
+#define GCC_PDM_AHB_CLK 60
+#define GCC_PDM_XO4_CLK 61
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK 62
+#define GCC_QMIP_CAMERA_RT_AHB_CLK 63
+#define GCC_QMIP_DISP_AHB_CLK 64
+#define GCC_QMIP_GPU_AHB_CLK 65
+#define GCC_QMIP_PCIE_AHB_CLK 66
+#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 67
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK 68
+#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 69
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 70
+#define GCC_QUPV3_I2C_CORE_CLK 71
+#define GCC_QUPV3_I2C_S0_CLK 72
+#define GCC_QUPV3_I2C_S0_CLK_SRC 73
+#define GCC_QUPV3_I2C_S1_CLK 74
+#define GCC_QUPV3_I2C_S1_CLK_SRC 75
+#define GCC_QUPV3_I2C_S2_CLK 76
+#define GCC_QUPV3_I2C_S2_CLK_SRC 77
+#define GCC_QUPV3_I2C_S3_CLK 78
+#define GCC_QUPV3_I2C_S3_CLK_SRC 79
+#define GCC_QUPV3_I2C_S4_CLK 80
+#define GCC_QUPV3_I2C_S4_CLK_SRC 81
+#define GCC_QUPV3_I2C_S5_CLK 82
+#define GCC_QUPV3_I2C_S5_CLK_SRC 83
+#define GCC_QUPV3_I2C_S6_CLK 84
+#define GCC_QUPV3_I2C_S6_CLK_SRC 85
+#define GCC_QUPV3_I2C_S7_CLK 86
+#define GCC_QUPV3_I2C_S7_CLK_SRC 87
+#define GCC_QUPV3_I2C_S8_CLK 88
+#define GCC_QUPV3_I2C_S8_CLK_SRC 89
+#define GCC_QUPV3_I2C_S9_CLK 90
+#define GCC_QUPV3_I2C_S9_CLK_SRC 91
+#define GCC_QUPV3_I2C_S_AHB_CLK 92
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK 93
+#define GCC_QUPV3_WRAP1_CORE_CLK 94
+#define GCC_QUPV3_WRAP1_QSPI_REF_CLK 95
+#define GCC_QUPV3_WRAP1_QSPI_REF_CLK_SRC 96
+#define GCC_QUPV3_WRAP1_S0_CLK 97
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98
+#define GCC_QUPV3_WRAP1_S1_CLK 99
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100
+#define GCC_QUPV3_WRAP1_S2_CLK 101
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102
+#define GCC_QUPV3_WRAP1_S3_CLK 103
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104
+#define GCC_QUPV3_WRAP1_S4_CLK 105
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106
+#define GCC_QUPV3_WRAP1_S5_CLK 107
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108
+#define GCC_QUPV3_WRAP1_S6_CLK 109
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC 110
+#define GCC_QUPV3_WRAP1_S7_CLK 111
+#define GCC_QUPV3_WRAP1_S7_CLK_SRC 112
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK 113
+#define GCC_QUPV3_WRAP2_CORE_CLK 114
+#define GCC_QUPV3_WRAP2_IBI_CTRL_0_CLK_SRC 115
+#define GCC_QUPV3_WRAP2_IBI_CTRL_2_CLK 116
+#define GCC_QUPV3_WRAP2_IBI_CTRL_3_CLK 117
+#define GCC_QUPV3_WRAP2_S0_CLK 118
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC 119
+#define GCC_QUPV3_WRAP2_S1_CLK 120
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC 121
+#define GCC_QUPV3_WRAP2_S2_CLK 122
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC 123
+#define GCC_QUPV3_WRAP2_S3_CLK 124
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC 125
+#define GCC_QUPV3_WRAP2_S4_CLK 126
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC 127
+#define GCC_QUPV3_WRAP2_S5_CLK 128
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC 129
+#define GCC_QUPV3_WRAP2_S6_CLK 130
+#define GCC_QUPV3_WRAP2_S6_CLK_SRC 131
+#define GCC_QUPV3_WRAP2_S7_CLK 132
+#define GCC_QUPV3_WRAP2_S7_CLK_SRC 133
+#define GCC_QUPV3_WRAP3_CORE_2X_CLK 134
+#define GCC_QUPV3_WRAP3_CORE_CLK 135
+#define GCC_QUPV3_WRAP3_QSPI_REF_CLK 136
+#define GCC_QUPV3_WRAP3_QSPI_REF_CLK_SRC 137
+#define GCC_QUPV3_WRAP3_S0_CLK 138
+#define GCC_QUPV3_WRAP3_S0_CLK_SRC 139
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK 140
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK 141
+#define GCC_QUPV3_WRAP_2_IBI_2_AHB_CLK 142
+#define GCC_QUPV3_WRAP_2_IBI_3_AHB_CLK 143
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK 144
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK 145
+#define GCC_QUPV3_WRAP_3_M_AHB_CLK 146
+#define GCC_QUPV3_WRAP_3_S_AHB_CLK 147
+#define GCC_SDCC2_AHB_CLK 148
+#define GCC_SDCC2_APPS_CLK 149
+#define GCC_SDCC2_APPS_CLK_SRC 150
+#define GCC_SDCC4_AHB_CLK 151
+#define GCC_SDCC4_APPS_CLK 152
+#define GCC_SDCC4_APPS_CLK_SRC 153
+#define GCC_UFS_PHY_AHB_CLK 154
+#define GCC_UFS_PHY_AXI_CLK 155
+#define GCC_UFS_PHY_AXI_CLK_SRC 156
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK 157
+#define GCC_UFS_PHY_ICE_CORE_CLK 158
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 159
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 160
+#define GCC_UFS_PHY_PHY_AUX_CLK 161
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 162
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 163
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 164
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 165
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 166
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 167
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 169
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK 170
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 171
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 172
+#define GCC_USB30_PRIM_MASTER_CLK 173
+#define GCC_USB30_PRIM_MASTER_CLK_SRC 174
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK 175
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 176
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 177
+#define GCC_USB30_PRIM_SLEEP_CLK 178
+#define GCC_USB3_PRIM_PHY_AUX_CLK 179
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 180
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 181
+#define GCC_USB3_PRIM_PHY_PIPE_CLK 182
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 183
+#define GCC_VIDEO_AHB_CLK 184
+#define GCC_VIDEO_AXI0_CLK 185
+#define GCC_VIDEO_AXI1_CLK 186
+#define GCC_VIDEO_XO_CLK 187
+#define GCC_GPLL0_AO 188
+#define GCC_GPLL0_OUT_EVEN_AO 189
+#define GCC_GPLL1_AO 190
+#define GCC_GPLL3_AO 191
+#define GCC_GPLL4_AO 192
+#define GCC_GPLL6_AO 193
+
+/* GCC resets */
+#define GCC_CAMERA_BCR 0
+#define GCC_DISPLAY_BCR 1
+#define GCC_GPU_BCR 2
+#define GCC_PCIE_0_BCR 3
+#define GCC_PCIE_0_LINK_DOWN_BCR 4
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5
+#define GCC_PCIE_0_PHY_BCR 6
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7
+#define GCC_PCIE_1_BCR 8
+#define GCC_PCIE_1_LINK_DOWN_BCR 9
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10
+#define GCC_PCIE_1_PHY_BCR 11
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12
+#define GCC_PCIE_PHY_BCR 13
+#define GCC_PCIE_PHY_CFG_AHB_BCR 14
+#define GCC_PCIE_PHY_COM_BCR 15
+#define GCC_PDM_BCR 16
+#define GCC_QUPV3_WRAPPER_1_BCR 17
+#define GCC_QUPV3_WRAPPER_2_BCR 18
+#define GCC_QUPV3_WRAPPER_3_BCR 19
+#define GCC_QUPV3_WRAPPER_I2C_BCR 20
+#define GCC_QUSB2PHY_PRIM_BCR 21
+#define GCC_QUSB2PHY_SEC_BCR 22
+#define GCC_SDCC2_BCR 23
+#define GCC_SDCC4_BCR 24
+#define GCC_UFS_PHY_BCR 25
+#define GCC_USB30_PRIM_BCR 26
+#define GCC_USB3_DP_PHY_PRIM_BCR 27
+#define GCC_USB3_DP_PHY_SEC_BCR 28
+#define GCC_USB3_PHY_PRIM_BCR 29
+#define GCC_USB3_PHY_SEC_BCR 30
+#define GCC_USB3PHY_PHY_PRIM_BCR 31
+#define GCC_USB3PHY_PHY_SEC_BCR 32
+#define GCC_VIDEO_AXI0_CLK_ARES 33
+#define GCC_VIDEO_AXI1_CLK_ARES 34
+#define GCC_VIDEO_BCR 35
+
+/* GCC power domains */
+#define PCIE_0_GDSC 0
+#define PCIE_0_PHY_GDSC 1
+#define PCIE_1_GDSC 2
+#define PCIE_1_PHY_GDSC 3
+#define UFS_PHY_GDSC 4
+#define UFS_MEM_PHY_GDSC 5
+#define USB30_PRIM_GDSC 6
+#define USB3_PHY_GDSC 7
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8650_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK 0
+#define GPU_CC_CRC_AHB_CLK 1
+#define GPU_CC_CX_ACCU_SHIFT_CLK 2
+#define GPU_CC_CX_FF_CLK 3
+#define GPU_CC_CX_GMU_CLK 4
+#define GPU_CC_CXO_AON_CLK 5
+#define GPU_CC_CXO_CLK 6
+#define GPU_CC_DEMET_CLK 7
+#define GPU_CC_DPM_CLK 8
+#define GPU_CC_FF_CLK_SRC 9
+#define GPU_CC_FREQ_MEASURE_CLK 10
+#define GPU_CC_GMU_CLK_SRC 11
+#define GPU_CC_GX_ACCU_SHIFT_CLK 12
+#define GPU_CC_GX_FF_CLK 13
+#define GPU_CC_GX_GFX3D_CLK 14
+#define GPU_CC_GX_GFX3D_RDVM_CLK 15
+#define GPU_CC_GX_GMU_CLK 16
+#define GPU_CC_GX_VSENSE_CLK 17
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 18
+#define GPU_CC_HUB_AON_CLK 19
+#define GPU_CC_HUB_CLK_SRC 20
+#define GPU_CC_HUB_CX_INT_CLK 21
+#define GPU_CC_HUB_DIV_CLK_SRC 22
+#define GPU_CC_MEMNOC_GFX_CLK 23
+#define GPU_CC_PLL0 24
+#define GPU_CC_PLL1 25
+#define GPU_CC_SLEEP_CLK 26
+
+/* GDSCs */
+#define GPU_GX_GDSC 0
+#define GPU_CX_GDSC 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_TCSR_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_TCSR_CC_SM8650_H
+
+/* TCSR CC clocks */
+#define TCSR_PCIE_0_CLKREF_EN 0
+#define TCSR_PCIE_1_CLKREF_EN 1
+#define TCSR_UFS_CLKREF_EN 2
+#define TCSR_UFS_PAD_CLKREF_EN 3
+#define TCSR_USB2_CLKREF_EN 4
+#define TCSR_USB3_CLKREF_EN 5
+
+#endif
/* VIDEO_CC Resets */
#define VIDEO_CC_MVSC_CORE_CLK_BCR 0
+#define VIDEO_CC_INTERFACE_BCR 1
+#define VIDEO_CC_MVS0_BCR 2
+#define VIDEO_CC_MVS1_BCR 3
+#define VIDEO_CC_MVSC_BCR 4
/* VIDEO_CC GDSCRs */
#define VENUS_GDSC 0
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_X1E80100_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_X1E80100_H
+
+/* GCC clocks */
+#define GCC_AGGRE_NOC_USB_NORTH_AXI_CLK 0
+#define GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK 1
+#define GCC_AGGRE_UFS_PHY_AXI_CLK 2
+#define GCC_AGGRE_USB2_PRIM_AXI_CLK 3
+#define GCC_AGGRE_USB3_MP_AXI_CLK 4
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5
+#define GCC_AGGRE_USB3_SEC_AXI_CLK 6
+#define GCC_AGGRE_USB3_TERT_AXI_CLK 7
+#define GCC_AGGRE_USB4_0_AXI_CLK 8
+#define GCC_AGGRE_USB4_1_AXI_CLK 9
+#define GCC_AGGRE_USB4_2_AXI_CLK 10
+#define GCC_AGGRE_USB_NOC_AXI_CLK 11
+#define GCC_AV1E_AHB_CLK 12
+#define GCC_AV1E_AXI_CLK 13
+#define GCC_AV1E_XO_CLK 14
+#define GCC_BOOT_ROM_AHB_CLK 15
+#define GCC_CAMERA_AHB_CLK 16
+#define GCC_CAMERA_HF_AXI_CLK 17
+#define GCC_CAMERA_SF_AXI_CLK 18
+#define GCC_CAMERA_XO_CLK 19
+#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 20
+#define GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK 21
+#define GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK 22
+#define GCC_CFG_NOC_USB2_PRIM_AXI_CLK 23
+#define GCC_CFG_NOC_USB3_MP_AXI_CLK 24
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 25
+#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 26
+#define GCC_CFG_NOC_USB3_TERT_AXI_CLK 27
+#define GCC_CFG_NOC_USB_ANOC_AHB_CLK 28
+#define GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK 29
+#define GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK 30
+#define GCC_CNOC_PCIE1_TUNNEL_CLK 31
+#define GCC_CNOC_PCIE2_TUNNEL_CLK 32
+#define GCC_CNOC_PCIE_NORTH_SF_AXI_CLK 33
+#define GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK 34
+#define GCC_CNOC_PCIE_TUNNEL_CLK 35
+#define GCC_DDRSS_GPU_AXI_CLK 36
+#define GCC_DISP_AHB_CLK 37
+#define GCC_DISP_HF_AXI_CLK 38
+#define GCC_DISP_XO_CLK 39
+#define GCC_GP1_CLK 40
+#define GCC_GP1_CLK_SRC 41
+#define GCC_GP2_CLK 42
+#define GCC_GP2_CLK_SRC 43
+#define GCC_GP3_CLK 44
+#define GCC_GP3_CLK_SRC 45
+#define GCC_GPLL0 46
+#define GCC_GPLL0_OUT_EVEN 47
+#define GCC_GPLL4 48
+#define GCC_GPLL7 49
+#define GCC_GPLL8 50
+#define GCC_GPLL9 51
+#define GCC_GPU_CFG_AHB_CLK 52
+#define GCC_GPU_GPLL0_CPH_CLK_SRC 53
+#define GCC_GPU_GPLL0_DIV_CPH_CLK_SRC 54
+#define GCC_GPU_MEMNOC_GFX_CLK 55
+#define GCC_GPU_SNOC_DVM_GFX_CLK 56
+#define GCC_PCIE0_PHY_RCHNG_CLK 57
+#define GCC_PCIE1_PHY_RCHNG_CLK 58
+#define GCC_PCIE2_PHY_RCHNG_CLK 59
+#define GCC_PCIE_0_AUX_CLK 60
+#define GCC_PCIE_0_AUX_CLK_SRC 61
+#define GCC_PCIE_0_CFG_AHB_CLK 62
+#define GCC_PCIE_0_MSTR_AXI_CLK 63
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 64
+#define GCC_PCIE_0_PIPE_CLK 65
+#define GCC_PCIE_0_SLV_AXI_CLK 66
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 67
+#define GCC_PCIE_1_AUX_CLK 68
+#define GCC_PCIE_1_AUX_CLK_SRC 69
+#define GCC_PCIE_1_CFG_AHB_CLK 70
+#define GCC_PCIE_1_MSTR_AXI_CLK 71
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 72
+#define GCC_PCIE_1_PIPE_CLK 73
+#define GCC_PCIE_1_SLV_AXI_CLK 74
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 75
+#define GCC_PCIE_2_AUX_CLK 76
+#define GCC_PCIE_2_AUX_CLK_SRC 77
+#define GCC_PCIE_2_CFG_AHB_CLK 78
+#define GCC_PCIE_2_MSTR_AXI_CLK 79
+#define GCC_PCIE_2_PHY_RCHNG_CLK_SRC 80
+#define GCC_PCIE_2_PIPE_CLK 81
+#define GCC_PCIE_2_SLV_AXI_CLK 82
+#define GCC_PCIE_2_SLV_Q2A_AXI_CLK 83
+#define GCC_PCIE_3_AUX_CLK 84
+#define GCC_PCIE_3_AUX_CLK_SRC 85
+#define GCC_PCIE_3_CFG_AHB_CLK 86
+#define GCC_PCIE_3_MSTR_AXI_CLK 87
+#define GCC_PCIE_3_PHY_AUX_CLK 88
+#define GCC_PCIE_3_PHY_RCHNG_CLK 89
+#define GCC_PCIE_3_PHY_RCHNG_CLK_SRC 90
+#define GCC_PCIE_3_PIPE_CLK 91
+#define GCC_PCIE_3_PIPE_DIV_CLK_SRC 92
+#define GCC_PCIE_3_PIPEDIV2_CLK 93
+#define GCC_PCIE_3_SLV_AXI_CLK 94
+#define GCC_PCIE_3_SLV_Q2A_AXI_CLK 95
+#define GCC_PCIE_4_AUX_CLK 96
+#define GCC_PCIE_4_AUX_CLK_SRC 97
+#define GCC_PCIE_4_CFG_AHB_CLK 98
+#define GCC_PCIE_4_MSTR_AXI_CLK 99
+#define GCC_PCIE_4_PHY_RCHNG_CLK 100
+#define GCC_PCIE_4_PHY_RCHNG_CLK_SRC 101
+#define GCC_PCIE_4_PIPE_CLK 102
+#define GCC_PCIE_4_PIPE_DIV_CLK_SRC 103
+#define GCC_PCIE_4_PIPEDIV2_CLK 104
+#define GCC_PCIE_4_SLV_AXI_CLK 105
+#define GCC_PCIE_4_SLV_Q2A_AXI_CLK 106
+#define GCC_PCIE_5_AUX_CLK 107
+#define GCC_PCIE_5_AUX_CLK_SRC 108
+#define GCC_PCIE_5_CFG_AHB_CLK 109
+#define GCC_PCIE_5_MSTR_AXI_CLK 110
+#define GCC_PCIE_5_PHY_RCHNG_CLK 111
+#define GCC_PCIE_5_PHY_RCHNG_CLK_SRC 112
+#define GCC_PCIE_5_PIPE_CLK 113
+#define GCC_PCIE_5_PIPE_DIV_CLK_SRC 114
+#define GCC_PCIE_5_PIPEDIV2_CLK 115
+#define GCC_PCIE_5_SLV_AXI_CLK 116
+#define GCC_PCIE_5_SLV_Q2A_AXI_CLK 117
+#define GCC_PCIE_6A_AUX_CLK 118
+#define GCC_PCIE_6A_AUX_CLK_SRC 119
+#define GCC_PCIE_6A_CFG_AHB_CLK 120
+#define GCC_PCIE_6A_MSTR_AXI_CLK 121
+#define GCC_PCIE_6A_PHY_AUX_CLK 122
+#define GCC_PCIE_6A_PHY_RCHNG_CLK 123
+#define GCC_PCIE_6A_PHY_RCHNG_CLK_SRC 124
+#define GCC_PCIE_6A_PIPE_CLK 125
+#define GCC_PCIE_6A_PIPE_DIV_CLK_SRC 126
+#define GCC_PCIE_6A_PIPEDIV2_CLK 127
+#define GCC_PCIE_6A_SLV_AXI_CLK 128
+#define GCC_PCIE_6A_SLV_Q2A_AXI_CLK 129
+#define GCC_PCIE_6B_AUX_CLK 130
+#define GCC_PCIE_6B_AUX_CLK_SRC 131
+#define GCC_PCIE_6B_CFG_AHB_CLK 132
+#define GCC_PCIE_6B_MSTR_AXI_CLK 133
+#define GCC_PCIE_6B_PHY_AUX_CLK 134
+#define GCC_PCIE_6B_PHY_RCHNG_CLK 135
+#define GCC_PCIE_6B_PHY_RCHNG_CLK_SRC 136
+#define GCC_PCIE_6B_PIPE_CLK 137
+#define GCC_PCIE_6B_PIPE_DIV_CLK_SRC 138
+#define GCC_PCIE_6B_PIPEDIV2_CLK 139
+#define GCC_PCIE_6B_SLV_AXI_CLK 140
+#define GCC_PCIE_6B_SLV_Q2A_AXI_CLK 141
+#define GCC_PCIE_RSCC_AHB_CLK 142
+#define GCC_PCIE_RSCC_XO_CLK 143
+#define GCC_PCIE_RSCC_XO_CLK_SRC 144
+#define GCC_PDM2_CLK 145
+#define GCC_PDM2_CLK_SRC 146
+#define GCC_PDM_AHB_CLK 147
+#define GCC_PDM_XO4_CLK 148
+#define GCC_QMIP_AV1E_AHB_CLK 149
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK 150
+#define GCC_QMIP_CAMERA_RT_AHB_CLK 151
+#define GCC_QMIP_DISP_AHB_CLK 152
+#define GCC_QMIP_GPU_AHB_CLK 153
+#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 154
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK 155
+#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 156
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 157
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK 158
+#define GCC_QUPV3_WRAP0_CORE_CLK 159
+#define GCC_QUPV3_WRAP0_QSPI_S2_CLK 160
+#define GCC_QUPV3_WRAP0_QSPI_S3_CLK 161
+#define GCC_QUPV3_WRAP0_S0_CLK 162
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC 163
+#define GCC_QUPV3_WRAP0_S1_CLK 164
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC 165
+#define GCC_QUPV3_WRAP0_S2_CLK 166
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC 167
+#define GCC_QUPV3_WRAP0_S2_DIV_CLK_SRC 168
+#define GCC_QUPV3_WRAP0_S3_CLK 169
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC 170
+#define GCC_QUPV3_WRAP0_S3_DIV_CLK_SRC 171
+#define GCC_QUPV3_WRAP0_S4_CLK 172
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC 173
+#define GCC_QUPV3_WRAP0_S5_CLK 174
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC 175
+#define GCC_QUPV3_WRAP0_S6_CLK 176
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC 177
+#define GCC_QUPV3_WRAP0_S7_CLK 178
+#define GCC_QUPV3_WRAP0_S7_CLK_SRC 179
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK 180
+#define GCC_QUPV3_WRAP1_CORE_CLK 181
+#define GCC_QUPV3_WRAP1_QSPI_S2_CLK 182
+#define GCC_QUPV3_WRAP1_QSPI_S3_CLK 183
+#define GCC_QUPV3_WRAP1_S0_CLK 184
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC 185
+#define GCC_QUPV3_WRAP1_S1_CLK 186
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC 187
+#define GCC_QUPV3_WRAP1_S2_CLK 188
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC 189
+#define GCC_QUPV3_WRAP1_S2_DIV_CLK_SRC 190
+#define GCC_QUPV3_WRAP1_S3_CLK 191
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC 192
+#define GCC_QUPV3_WRAP1_S3_DIV_CLK_SRC 193
+#define GCC_QUPV3_WRAP1_S4_CLK 194
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC 195
+#define GCC_QUPV3_WRAP1_S5_CLK 196
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC 197
+#define GCC_QUPV3_WRAP1_S6_CLK 198
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC 199
+#define GCC_QUPV3_WRAP1_S7_CLK 200
+#define GCC_QUPV3_WRAP1_S7_CLK_SRC 201
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK 202
+#define GCC_QUPV3_WRAP2_CORE_CLK 203
+#define GCC_QUPV3_WRAP2_QSPI_S2_CLK 204
+#define GCC_QUPV3_WRAP2_QSPI_S3_CLK 205
+#define GCC_QUPV3_WRAP2_S0_CLK 206
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC 207
+#define GCC_QUPV3_WRAP2_S1_CLK 208
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC 209
+#define GCC_QUPV3_WRAP2_S2_CLK 210
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC 211
+#define GCC_QUPV3_WRAP2_S2_DIV_CLK_SRC 212
+#define GCC_QUPV3_WRAP2_S3_CLK 213
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC 214
+#define GCC_QUPV3_WRAP2_S3_DIV_CLK_SRC 215
+#define GCC_QUPV3_WRAP2_S4_CLK 216
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC 217
+#define GCC_QUPV3_WRAP2_S5_CLK 218
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC 219
+#define GCC_QUPV3_WRAP2_S6_CLK 220
+#define GCC_QUPV3_WRAP2_S6_CLK_SRC 221
+#define GCC_QUPV3_WRAP2_S7_CLK 222
+#define GCC_QUPV3_WRAP2_S7_CLK_SRC 223
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK 224
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK 225
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK 226
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK 227
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK 228
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK 229
+#define GCC_SDCC2_AHB_CLK 230
+#define GCC_SDCC2_APPS_CLK 231
+#define GCC_SDCC2_APPS_CLK_SRC 232
+#define GCC_SDCC4_AHB_CLK 233
+#define GCC_SDCC4_APPS_CLK 234
+#define GCC_SDCC4_APPS_CLK_SRC 235
+#define GCC_SYS_NOC_USB_AXI_CLK 236
+#define GCC_UFS_PHY_AHB_CLK 237
+#define GCC_UFS_PHY_AXI_CLK 238
+#define GCC_UFS_PHY_AXI_CLK_SRC 239
+#define GCC_UFS_PHY_ICE_CORE_CLK 240
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 241
+#define GCC_UFS_PHY_PHY_AUX_CLK 242
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 243
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 244
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 245
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 246
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK 247
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 248
+#define GCC_USB20_MASTER_CLK 249
+#define GCC_USB20_MASTER_CLK_SRC 250
+#define GCC_USB20_MOCK_UTMI_CLK 251
+#define GCC_USB20_MOCK_UTMI_CLK_SRC 252
+#define GCC_USB20_MOCK_UTMI_POSTDIV_CLK_SRC 253
+#define GCC_USB20_SLEEP_CLK 254
+#define GCC_USB30_MP_MASTER_CLK 255
+#define GCC_USB30_MP_MASTER_CLK_SRC 256
+#define GCC_USB30_MP_MOCK_UTMI_CLK 257
+#define GCC_USB30_MP_MOCK_UTMI_CLK_SRC 258
+#define GCC_USB30_MP_MOCK_UTMI_POSTDIV_CLK_SRC 259
+#define GCC_USB30_MP_SLEEP_CLK 260
+#define GCC_USB30_PRIM_MASTER_CLK 261
+#define GCC_USB30_PRIM_MASTER_CLK_SRC 262
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK 263
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 264
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 265
+#define GCC_USB30_PRIM_SLEEP_CLK 266
+#define GCC_USB30_SEC_MASTER_CLK 267
+#define GCC_USB30_SEC_MASTER_CLK_SRC 268
+#define GCC_USB30_SEC_MOCK_UTMI_CLK 269
+#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 270
+#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 271
+#define GCC_USB30_SEC_SLEEP_CLK 272
+#define GCC_USB30_TERT_MASTER_CLK 273
+#define GCC_USB30_TERT_MASTER_CLK_SRC 274
+#define GCC_USB30_TERT_MOCK_UTMI_CLK 275
+#define GCC_USB30_TERT_MOCK_UTMI_CLK_SRC 276
+#define GCC_USB30_TERT_MOCK_UTMI_POSTDIV_CLK_SRC 277
+#define GCC_USB30_TERT_SLEEP_CLK 278
+#define GCC_USB3_MP_PHY_AUX_CLK 279
+#define GCC_USB3_MP_PHY_AUX_CLK_SRC 280
+#define GCC_USB3_MP_PHY_COM_AUX_CLK 281
+#define GCC_USB3_MP_PHY_PIPE_0_CLK 282
+#define GCC_USB3_MP_PHY_PIPE_1_CLK 283
+#define GCC_USB3_PRIM_PHY_AUX_CLK 284
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 285
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 286
+#define GCC_USB3_PRIM_PHY_PIPE_CLK 287
+#define GCC_USB3_SEC_PHY_AUX_CLK 288
+#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 289
+#define GCC_USB3_SEC_PHY_COM_AUX_CLK 290
+#define GCC_USB3_SEC_PHY_PIPE_CLK 291
+#define GCC_USB3_TERT_PHY_AUX_CLK 292
+#define GCC_USB3_TERT_PHY_AUX_CLK_SRC 293
+#define GCC_USB3_TERT_PHY_COM_AUX_CLK 294
+#define GCC_USB3_TERT_PHY_PIPE_CLK 295
+#define GCC_USB4_0_CFG_AHB_CLK 296
+#define GCC_USB4_0_DP0_CLK 297
+#define GCC_USB4_0_DP1_CLK 298
+#define GCC_USB4_0_MASTER_CLK 299
+#define GCC_USB4_0_MASTER_CLK_SRC 300
+#define GCC_USB4_0_PHY_P2RR2P_PIPE_CLK 301
+#define GCC_USB4_0_PHY_PCIE_PIPE_CLK 302
+#define GCC_USB4_0_PHY_PCIE_PIPE_CLK_SRC 303
+#define GCC_USB4_0_PHY_RX0_CLK 304
+#define GCC_USB4_0_PHY_RX1_CLK 305
+#define GCC_USB4_0_PHY_USB_PIPE_CLK 306
+#define GCC_USB4_0_SB_IF_CLK 307
+#define GCC_USB4_0_SB_IF_CLK_SRC 308
+#define GCC_USB4_0_SYS_CLK 309
+#define GCC_USB4_0_TMU_CLK 310
+#define GCC_USB4_0_TMU_CLK_SRC 311
+#define GCC_USB4_1_CFG_AHB_CLK 312
+#define GCC_USB4_1_DP0_CLK 313
+#define GCC_USB4_1_DP1_CLK 314
+#define GCC_USB4_1_MASTER_CLK 315
+#define GCC_USB4_1_MASTER_CLK_SRC 316
+#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK 317
+#define GCC_USB4_1_PHY_PCIE_PIPE_CLK 318
+#define GCC_USB4_1_PHY_PCIE_PIPE_CLK_SRC 319
+#define GCC_USB4_1_PHY_RX0_CLK 320
+#define GCC_USB4_1_PHY_RX1_CLK 321
+#define GCC_USB4_1_PHY_USB_PIPE_CLK 322
+#define GCC_USB4_1_SB_IF_CLK 323
+#define GCC_USB4_1_SB_IF_CLK_SRC 324
+#define GCC_USB4_1_SYS_CLK 325
+#define GCC_USB4_1_TMU_CLK 326
+#define GCC_USB4_1_TMU_CLK_SRC 327
+#define GCC_USB4_2_CFG_AHB_CLK 328
+#define GCC_USB4_2_DP0_CLK 329
+#define GCC_USB4_2_DP1_CLK 330
+#define GCC_USB4_2_MASTER_CLK 331
+#define GCC_USB4_2_MASTER_CLK_SRC 332
+#define GCC_USB4_2_PHY_P2RR2P_PIPE_CLK 333
+#define GCC_USB4_2_PHY_PCIE_PIPE_CLK 334
+#define GCC_USB4_2_PHY_PCIE_PIPE_CLK_SRC 335
+#define GCC_USB4_2_PHY_RX0_CLK 336
+#define GCC_USB4_2_PHY_RX1_CLK 337
+#define GCC_USB4_2_PHY_USB_PIPE_CLK 338
+#define GCC_USB4_2_SB_IF_CLK 339
+#define GCC_USB4_2_SB_IF_CLK_SRC 340
+#define GCC_USB4_2_SYS_CLK 341
+#define GCC_USB4_2_TMU_CLK 342
+#define GCC_USB4_2_TMU_CLK_SRC 343
+#define GCC_VIDEO_AHB_CLK 344
+#define GCC_VIDEO_AXI0_CLK 345
+#define GCC_VIDEO_AXI1_CLK 346
+#define GCC_VIDEO_XO_CLK 347
+#define GCC_PCIE_3_PIPE_CLK_SRC 348
+#define GCC_PCIE_4_PIPE_CLK_SRC 349
+#define GCC_PCIE_5_PIPE_CLK_SRC 350
+#define GCC_PCIE_6A_PIPE_CLK_SRC 351
+#define GCC_PCIE_6B_PIPE_CLK_SRC 352
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 353
+#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 354
+#define GCC_USB3_TERT_PHY_PIPE_CLK_SRC 355
+
+/* GCC power domains */
+#define GCC_PCIE_0_TUNNEL_GDSC 0
+#define GCC_PCIE_1_TUNNEL_GDSC 1
+#define GCC_PCIE_2_TUNNEL_GDSC 2
+#define GCC_PCIE_3_GDSC 3
+#define GCC_PCIE_3_PHY_GDSC 4
+#define GCC_PCIE_4_GDSC 5
+#define GCC_PCIE_4_PHY_GDSC 6
+#define GCC_PCIE_5_GDSC 7
+#define GCC_PCIE_5_PHY_GDSC 8
+#define GCC_PCIE_6_PHY_GDSC 9
+#define GCC_PCIE_6A_GDSC 10
+#define GCC_PCIE_6B_GDSC 11
+#define GCC_UFS_MEM_PHY_GDSC 12
+#define GCC_UFS_PHY_GDSC 13
+#define GCC_USB20_PRIM_GDSC 14
+#define GCC_USB30_MP_GDSC 15
+#define GCC_USB30_PRIM_GDSC 16
+#define GCC_USB30_SEC_GDSC 17
+#define GCC_USB30_TERT_GDSC 18
+#define GCC_USB3_MP_SS0_PHY_GDSC 19
+#define GCC_USB3_MP_SS1_PHY_GDSC 20
+#define GCC_USB4_0_GDSC 21
+#define GCC_USB4_1_GDSC 22
+#define GCC_USB4_2_GDSC 23
+#define GCC_USB_0_PHY_GDSC 24
+#define GCC_USB_1_PHY_GDSC 25
+#define GCC_USB_2_PHY_GDSC 26
+
+/* GCC resets */
+#define GCC_AV1E_BCR 0
+#define GCC_CAMERA_BCR 1
+#define GCC_DISPLAY_BCR 2
+#define GCC_GPU_BCR 3
+#define GCC_PCIE_0_LINK_DOWN_BCR 4
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5
+#define GCC_PCIE_0_PHY_BCR 6
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7
+#define GCC_PCIE_0_TUNNEL_BCR 8
+#define GCC_PCIE_1_LINK_DOWN_BCR 9
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10
+#define GCC_PCIE_1_PHY_BCR 11
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12
+#define GCC_PCIE_1_TUNNEL_BCR 13
+#define GCC_PCIE_2_LINK_DOWN_BCR 14
+#define GCC_PCIE_2_NOCSR_COM_PHY_BCR 15
+#define GCC_PCIE_2_PHY_BCR 16
+#define GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR 17
+#define GCC_PCIE_2_TUNNEL_BCR 18
+#define GCC_PCIE_3_BCR 19
+#define GCC_PCIE_3_LINK_DOWN_BCR 20
+#define GCC_PCIE_3_NOCSR_COM_PHY_BCR 21
+#define GCC_PCIE_3_PHY_BCR 22
+#define GCC_PCIE_3_PHY_NOCSR_COM_PHY_BCR 23
+#define GCC_PCIE_4_BCR 24
+#define GCC_PCIE_4_LINK_DOWN_BCR 25
+#define GCC_PCIE_4_NOCSR_COM_PHY_BCR 26
+#define GCC_PCIE_4_PHY_BCR 27
+#define GCC_PCIE_4_PHY_NOCSR_COM_PHY_BCR 28
+#define GCC_PCIE_5_BCR 29
+#define GCC_PCIE_5_LINK_DOWN_BCR 30
+#define GCC_PCIE_5_NOCSR_COM_PHY_BCR 31
+#define GCC_PCIE_5_PHY_BCR 32
+#define GCC_PCIE_5_PHY_NOCSR_COM_PHY_BCR 33
+#define GCC_PCIE_6A_BCR 34
+#define GCC_PCIE_6A_LINK_DOWN_BCR 35
+#define GCC_PCIE_6A_NOCSR_COM_PHY_BCR 36
+#define GCC_PCIE_6A_PHY_BCR 37
+#define GCC_PCIE_6A_PHY_NOCSR_COM_PHY_BCR 38
+#define GCC_PCIE_6B_BCR 39
+#define GCC_PCIE_6B_LINK_DOWN_BCR 40
+#define GCC_PCIE_6B_NOCSR_COM_PHY_BCR 41
+#define GCC_PCIE_6B_PHY_BCR 42
+#define GCC_PCIE_6B_PHY_NOCSR_COM_PHY_BCR 43
+#define GCC_PCIE_PHY_BCR 44
+#define GCC_PCIE_PHY_CFG_AHB_BCR 45
+#define GCC_PCIE_PHY_COM_BCR 46
+#define GCC_PCIE_RSCC_BCR 47
+#define GCC_PDM_BCR 48
+#define GCC_QUPV3_WRAPPER_0_BCR 49
+#define GCC_QUPV3_WRAPPER_1_BCR 50
+#define GCC_QUPV3_WRAPPER_2_BCR 51
+#define GCC_QUSB2PHY_HS0_MP_BCR 52
+#define GCC_QUSB2PHY_HS1_MP_BCR 53
+#define GCC_QUSB2PHY_PRIM_BCR 54
+#define GCC_QUSB2PHY_SEC_BCR 55
+#define GCC_QUSB2PHY_TERT_BCR 56
+#define GCC_QUSB2PHY_USB20_HS_BCR 57
+#define GCC_SDCC2_BCR 58
+#define GCC_SDCC4_BCR 59
+#define GCC_UFS_PHY_BCR 60
+#define GCC_USB20_PRIM_BCR 61
+#define GCC_USB30_MP_BCR 62
+#define GCC_USB30_PRIM_BCR 63
+#define GCC_USB30_SEC_BCR 64
+#define GCC_USB30_TERT_BCR 65
+#define GCC_USB3_MP_SS0_PHY_BCR 66
+#define GCC_USB3_MP_SS1_PHY_BCR 67
+#define GCC_USB3_PHY_PRIM_BCR 68
+#define GCC_USB3_PHY_SEC_BCR 69
+#define GCC_USB3_PHY_TERT_BCR 70
+#define GCC_USB3_UNIPHY_MP0_BCR 71
+#define GCC_USB3_UNIPHY_MP1_BCR 72
+#define GCC_USB3PHY_PHY_PRIM_BCR 73
+#define GCC_USB3PHY_PHY_SEC_BCR 74
+#define GCC_USB3PHY_PHY_TERT_BCR 75
+#define GCC_USB3UNIPHY_PHY_MP0_BCR 76
+#define GCC_USB3UNIPHY_PHY_MP1_BCR 77
+#define GCC_USB4_0_BCR 78
+#define GCC_USB4_0_DP0_PHY_PRIM_BCR 79
+#define GCC_USB4_1_DP0_PHY_SEC_BCR 80
+#define GCC_USB4_2_DP0_PHY_TERT_BCR 81
+#define GCC_USB4_1_BCR 82
+#define GCC_USB4_2_BCR 83
+#define GCC_USB_0_PHY_BCR 84
+#define GCC_USB_1_PHY_BCR 85
+#define GCC_USB_2_PHY_BCR 86
+#define GCC_VIDEO_BCR 87
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Ltd.
+ */
+
+#ifndef __DT_BINDINGS_SOPHGO_CV1800_CLK_H__
+#define __DT_BINDINGS_SOPHGO_CV1800_CLK_H__
+
+#define CLK_MPLL 0
+#define CLK_TPLL 1
+#define CLK_FPLL 2
+#define CLK_MIPIMPLL 3
+#define CLK_A0PLL 4
+#define CLK_DISPPLL 5
+#define CLK_CAM0PLL 6
+#define CLK_CAM1PLL 7
+
+#define CLK_MIPIMPLL_D3 8
+#define CLK_CAM0PLL_D2 9
+#define CLK_CAM0PLL_D3 10
+
+#define CLK_TPU 11
+#define CLK_TPU_FAB 12
+#define CLK_AHB_ROM 13
+#define CLK_DDR_AXI_REG 14
+#define CLK_RTC_25M 15
+#define CLK_SRC_RTC_SYS_0 16
+#define CLK_TEMPSEN 17
+#define CLK_SARADC 18
+#define CLK_EFUSE 19
+#define CLK_APB_EFUSE 20
+#define CLK_DEBUG 21
+#define CLK_AP_DEBUG 22
+#define CLK_XTAL_MISC 23
+#define CLK_AXI4_EMMC 24
+#define CLK_EMMC 25
+#define CLK_EMMC_100K 26
+#define CLK_AXI4_SD0 27
+#define CLK_SD0 28
+#define CLK_SD0_100K 29
+#define CLK_AXI4_SD1 30
+#define CLK_SD1 31
+#define CLK_SD1_100K 32
+#define CLK_SPI_NAND 33
+#define CLK_ETH0_500M 34
+#define CLK_AXI4_ETH0 35
+#define CLK_ETH1_500M 36
+#define CLK_AXI4_ETH1 37
+#define CLK_APB_GPIO 38
+#define CLK_APB_GPIO_INTR 39
+#define CLK_GPIO_DB 40
+#define CLK_AHB_SF 41
+#define CLK_AHB_SF1 42
+#define CLK_A24M 43
+#define CLK_AUDSRC 44
+#define CLK_APB_AUDSRC 45
+#define CLK_SDMA_AXI 46
+#define CLK_SDMA_AUD0 47
+#define CLK_SDMA_AUD1 48
+#define CLK_SDMA_AUD2 49
+#define CLK_SDMA_AUD3 50
+#define CLK_I2C 51
+#define CLK_APB_I2C 52
+#define CLK_APB_I2C0 53
+#define CLK_APB_I2C1 54
+#define CLK_APB_I2C2 55
+#define CLK_APB_I2C3 56
+#define CLK_APB_I2C4 57
+#define CLK_APB_WDT 58
+#define CLK_PWM_SRC 59
+#define CLK_PWM 60
+#define CLK_SPI 61
+#define CLK_APB_SPI0 62
+#define CLK_APB_SPI1 63
+#define CLK_APB_SPI2 64
+#define CLK_APB_SPI3 65
+#define CLK_1M 66
+#define CLK_CAM0_200 67
+#define CLK_PM 68
+#define CLK_TIMER0 69
+#define CLK_TIMER1 70
+#define CLK_TIMER2 71
+#define CLK_TIMER3 72
+#define CLK_TIMER4 73
+#define CLK_TIMER5 74
+#define CLK_TIMER6 75
+#define CLK_TIMER7 76
+#define CLK_UART0 77
+#define CLK_APB_UART0 78
+#define CLK_UART1 79
+#define CLK_APB_UART1 80
+#define CLK_UART2 81
+#define CLK_APB_UART2 82
+#define CLK_UART3 83
+#define CLK_APB_UART3 84
+#define CLK_UART4 85
+#define CLK_APB_UART4 86
+#define CLK_APB_I2S0 87
+#define CLK_APB_I2S1 88
+#define CLK_APB_I2S2 89
+#define CLK_APB_I2S3 90
+#define CLK_AXI4_USB 91
+#define CLK_APB_USB 92
+#define CLK_USB_125M 93
+#define CLK_USB_33K 94
+#define CLK_USB_12M 95
+#define CLK_AXI4 96
+#define CLK_AXI6 97
+#define CLK_DSI_ESC 98
+#define CLK_AXI_VIP 99
+#define CLK_SRC_VIP_SYS_0 100
+#define CLK_SRC_VIP_SYS_1 101
+#define CLK_SRC_VIP_SYS_2 102
+#define CLK_SRC_VIP_SYS_3 103
+#define CLK_SRC_VIP_SYS_4 104
+#define CLK_CSI_BE_VIP 105
+#define CLK_CSI_MAC0_VIP 106
+#define CLK_CSI_MAC1_VIP 107
+#define CLK_CSI_MAC2_VIP 108
+#define CLK_CSI0_RX_VIP 109
+#define CLK_CSI1_RX_VIP 110
+#define CLK_ISP_TOP_VIP 111
+#define CLK_IMG_D_VIP 112
+#define CLK_IMG_V_VIP 113
+#define CLK_SC_TOP_VIP 114
+#define CLK_SC_D_VIP 115
+#define CLK_SC_V1_VIP 116
+#define CLK_SC_V2_VIP 117
+#define CLK_SC_V3_VIP 118
+#define CLK_DWA_VIP 119
+#define CLK_BT_VIP 120
+#define CLK_DISP_VIP 121
+#define CLK_DSI_MAC_VIP 122
+#define CLK_LVDS0_VIP 123
+#define CLK_LVDS1_VIP 124
+#define CLK_PAD_VI_VIP 125
+#define CLK_PAD_VI1_VIP 126
+#define CLK_PAD_VI2_VIP 127
+#define CLK_CFG_REG_VIP 128
+#define CLK_VIP_IP0 129
+#define CLK_VIP_IP1 130
+#define CLK_VIP_IP2 131
+#define CLK_VIP_IP3 132
+#define CLK_IVE_VIP 133
+#define CLK_RAW_VIP 134
+#define CLK_OSDC_VIP 135
+#define CLK_CAM0_VIP 136
+#define CLK_AXI_VIDEO_CODEC 137
+#define CLK_VC_SRC0 138
+#define CLK_VC_SRC1 139
+#define CLK_VC_SRC2 140
+#define CLK_H264C 141
+#define CLK_APB_H264C 142
+#define CLK_H265C 143
+#define CLK_APB_H265C 144
+#define CLK_JPEG 145
+#define CLK_APB_JPEG 146
+#define CLK_CAM0 147
+#define CLK_CAM1 148
+#define CLK_WGN 149
+#define CLK_WGN0 150
+#define CLK_WGN1 151
+#define CLK_WGN2 152
+#define CLK_KEYSCAN 153
+#define CLK_CFG_REG_VC 154
+#define CLK_C906_0 155
+#define CLK_C906_1 156
+#define CLK_A53 157
+#define CLK_CPU_AXI0 158
+#define CLK_CPU_GIC 159
+#define CLK_XTAL_AP 160
+
+// Only for CV181x
+#define CLK_DISP_SRC_VIP 161
+
+#endif /* __DT_BINDINGS_SOPHGO_CV1800_CLK_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+ */
+
+#ifndef _DT_BINDINGS_STM32MP25_CLKS_H_
+#define _DT_BINDINGS_STM32MP25_CLKS_H_
+
+/* INTERNAL/EXTERNAL OSCILLATORS */
+#define HSI_CK 0
+#define HSE_CK 1
+#define MSI_CK 2
+#define LSI_CK 3
+#define LSE_CK 4
+#define I2S_CK 5
+#define RTC_CK 6
+#define SPDIF_CK_SYMB 7
+
+/* PLL CLOCKS */
+#define PLL1_CK 8
+#define PLL2_CK 9
+#define PLL3_CK 10
+#define PLL4_CK 11
+#define PLL5_CK 12
+#define PLL6_CK 13
+#define PLL7_CK 14
+#define PLL8_CK 15
+
+#define CK_CPU1 16
+
+/* APB DIV CLOCKS */
+#define CK_ICN_APB1 17
+#define CK_ICN_APB2 18
+#define CK_ICN_APB3 19
+#define CK_ICN_APB4 20
+#define CK_ICN_APBDBG 21
+
+/* GLOBAL TIMER */
+#define TIMG1_CK 22
+#define TIMG2_CK 23
+
+/* FLEXGEN CLOCKS */
+#define CK_ICN_HS_MCU 24
+#define CK_ICN_SDMMC 25
+#define CK_ICN_DDR 26
+#define CK_ICN_DISPLAY 27
+#define CK_ICN_HSL 28
+#define CK_ICN_NIC 29
+#define CK_ICN_VID 30
+#define CK_FLEXGEN_07 31
+#define CK_FLEXGEN_08 32
+#define CK_FLEXGEN_09 33
+#define CK_FLEXGEN_10 34
+#define CK_FLEXGEN_11 35
+#define CK_FLEXGEN_12 36
+#define CK_FLEXGEN_13 37
+#define CK_FLEXGEN_14 38
+#define CK_FLEXGEN_15 39
+#define CK_FLEXGEN_16 40
+#define CK_FLEXGEN_17 41
+#define CK_FLEXGEN_18 42
+#define CK_FLEXGEN_19 43
+#define CK_FLEXGEN_20 44
+#define CK_FLEXGEN_21 45
+#define CK_FLEXGEN_22 46
+#define CK_FLEXGEN_23 47
+#define CK_FLEXGEN_24 48
+#define CK_FLEXGEN_25 49
+#define CK_FLEXGEN_26 50
+#define CK_FLEXGEN_27 51
+#define CK_FLEXGEN_28 52
+#define CK_FLEXGEN_29 53
+#define CK_FLEXGEN_30 54
+#define CK_FLEXGEN_31 55
+#define CK_FLEXGEN_32 56
+#define CK_FLEXGEN_33 57
+#define CK_FLEXGEN_34 58
+#define CK_FLEXGEN_35 59
+#define CK_FLEXGEN_36 60
+#define CK_FLEXGEN_37 61
+#define CK_FLEXGEN_38 62
+#define CK_FLEXGEN_39 63
+#define CK_FLEXGEN_40 64
+#define CK_FLEXGEN_41 65
+#define CK_FLEXGEN_42 66
+#define CK_FLEXGEN_43 67
+#define CK_FLEXGEN_44 68
+#define CK_FLEXGEN_45 69
+#define CK_FLEXGEN_46 70
+#define CK_FLEXGEN_47 71
+#define CK_FLEXGEN_48 72
+#define CK_FLEXGEN_49 73
+#define CK_FLEXGEN_50 74
+#define CK_FLEXGEN_51 75
+#define CK_FLEXGEN_52 76
+#define CK_FLEXGEN_53 77
+#define CK_FLEXGEN_54 78
+#define CK_FLEXGEN_55 79
+#define CK_FLEXGEN_56 80
+#define CK_FLEXGEN_57 81
+#define CK_FLEXGEN_58 82
+#define CK_FLEXGEN_59 83
+#define CK_FLEXGEN_60 84
+#define CK_FLEXGEN_61 85
+#define CK_FLEXGEN_62 86
+#define CK_FLEXGEN_63 87
+
+/* LOW SPEED MCU CLOCK */
+#define CK_ICN_LS_MCU 88
+
+#define CK_BUS_STM500 89
+#define CK_BUS_FMC 90
+#define CK_BUS_GPU 91
+#define CK_BUS_ETH1 92
+#define CK_BUS_ETH2 93
+#define CK_BUS_PCIE 94
+#define CK_BUS_DDRPHYC 95
+#define CK_BUS_SYSCPU1 96
+#define CK_BUS_ETHSW 97
+#define CK_BUS_HPDMA1 98
+#define CK_BUS_HPDMA2 99
+#define CK_BUS_HPDMA3 100
+#define CK_BUS_ADC12 101
+#define CK_BUS_ADC3 102
+#define CK_BUS_IPCC1 103
+#define CK_BUS_CCI 104
+#define CK_BUS_CRC 105
+#define CK_BUS_MDF1 106
+#define CK_BUS_OSPIIOM 107
+#define CK_BUS_BKPSRAM 108
+#define CK_BUS_HASH 109
+#define CK_BUS_RNG 110
+#define CK_BUS_CRYP1 111
+#define CK_BUS_CRYP2 112
+#define CK_BUS_SAES 113
+#define CK_BUS_PKA 114
+#define CK_BUS_GPIOA 115
+#define CK_BUS_GPIOB 116
+#define CK_BUS_GPIOC 117
+#define CK_BUS_GPIOD 118
+#define CK_BUS_GPIOE 119
+#define CK_BUS_GPIOF 120
+#define CK_BUS_GPIOG 121
+#define CK_BUS_GPIOH 122
+#define CK_BUS_GPIOI 123
+#define CK_BUS_GPIOJ 124
+#define CK_BUS_GPIOK 125
+#define CK_BUS_LPSRAM1 126
+#define CK_BUS_LPSRAM2 127
+#define CK_BUS_LPSRAM3 128
+#define CK_BUS_GPIOZ 129
+#define CK_BUS_LPDMA 130
+#define CK_BUS_HSEM 131
+#define CK_BUS_IPCC2 132
+#define CK_BUS_RTC 133
+#define CK_BUS_SPI8 134
+#define CK_BUS_LPUART1 135
+#define CK_BUS_I2C8 136
+#define CK_BUS_LPTIM3 137
+#define CK_BUS_LPTIM4 138
+#define CK_BUS_LPTIM5 139
+#define CK_BUS_IWDG5 140
+#define CK_BUS_WWDG2 141
+#define CK_BUS_I3C4 142
+#define CK_BUS_TIM2 143
+#define CK_BUS_TIM3 144
+#define CK_BUS_TIM4 145
+#define CK_BUS_TIM5 146
+#define CK_BUS_TIM6 147
+#define CK_BUS_TIM7 148
+#define CK_BUS_TIM10 149
+#define CK_BUS_TIM11 150
+#define CK_BUS_TIM12 151
+#define CK_BUS_TIM13 152
+#define CK_BUS_TIM14 153
+#define CK_BUS_LPTIM1 154
+#define CK_BUS_LPTIM2 155
+#define CK_BUS_SPI2 156
+#define CK_BUS_SPI3 157
+#define CK_BUS_SPDIFRX 158
+#define CK_BUS_USART2 159
+#define CK_BUS_USART3 160
+#define CK_BUS_UART4 161
+#define CK_BUS_UART5 162
+#define CK_BUS_I2C1 163
+#define CK_BUS_I2C2 164
+#define CK_BUS_I2C3 165
+#define CK_BUS_I2C4 166
+#define CK_BUS_I2C5 167
+#define CK_BUS_I2C6 168
+#define CK_BUS_I2C7 169
+#define CK_BUS_I3C1 170
+#define CK_BUS_I3C2 171
+#define CK_BUS_I3C3 172
+#define CK_BUS_TIM1 173
+#define CK_BUS_TIM8 174
+#define CK_BUS_TIM15 175
+#define CK_BUS_TIM16 176
+#define CK_BUS_TIM17 177
+#define CK_BUS_TIM20 178
+#define CK_BUS_SAI1 179
+#define CK_BUS_SAI2 180
+#define CK_BUS_SAI3 181
+#define CK_BUS_SAI4 182
+#define CK_BUS_USART1 183
+#define CK_BUS_USART6 184
+#define CK_BUS_UART7 185
+#define CK_BUS_UART8 186
+#define CK_BUS_UART9 187
+#define CK_BUS_FDCAN 188
+#define CK_BUS_SPI1 189
+#define CK_BUS_SPI4 190
+#define CK_BUS_SPI5 191
+#define CK_BUS_SPI6 192
+#define CK_BUS_SPI7 193
+#define CK_BUS_BSEC 194
+#define CK_BUS_IWDG1 195
+#define CK_BUS_IWDG2 196
+#define CK_BUS_IWDG3 197
+#define CK_BUS_IWDG4 198
+#define CK_BUS_WWDG1 199
+#define CK_BUS_VREF 200
+#define CK_BUS_DTS 201
+#define CK_BUS_SERC 202
+#define CK_BUS_HDP 203
+#define CK_BUS_IS2M 204
+#define CK_BUS_DSI 205
+#define CK_BUS_LTDC 206
+#define CK_BUS_CSI 207
+#define CK_BUS_DCMIPP 208
+#define CK_BUS_DDRC 209
+#define CK_BUS_DDRCFG 210
+#define CK_BUS_GICV2M 211
+#define CK_BUS_USBTC 212
+#define CK_BUS_USB3PCIEPHY 214
+#define CK_BUS_STGEN 215
+#define CK_BUS_VDEC 216
+#define CK_BUS_VENC 217
+#define CK_SYSDBG 218
+#define CK_KER_TIM2 219
+#define CK_KER_TIM3 220
+#define CK_KER_TIM4 221
+#define CK_KER_TIM5 222
+#define CK_KER_TIM6 223
+#define CK_KER_TIM7 224
+#define CK_KER_TIM10 225
+#define CK_KER_TIM11 226
+#define CK_KER_TIM12 227
+#define CK_KER_TIM13 228
+#define CK_KER_TIM14 229
+#define CK_KER_TIM1 230
+#define CK_KER_TIM8 231
+#define CK_KER_TIM15 232
+#define CK_KER_TIM16 233
+#define CK_KER_TIM17 234
+#define CK_KER_TIM20 235
+#define CK_BUS_SYSRAM 236
+#define CK_BUS_VDERAM 237
+#define CK_BUS_RETRAM 238
+#define CK_BUS_OSPI1 239
+#define CK_BUS_OSPI2 240
+#define CK_BUS_OTFD1 241
+#define CK_BUS_OTFD2 242
+#define CK_BUS_SRAM1 243
+#define CK_BUS_SRAM2 244
+#define CK_BUS_SDMMC1 245
+#define CK_BUS_SDMMC2 246
+#define CK_BUS_SDMMC3 247
+#define CK_BUS_DDR 248
+#define CK_BUS_RISAF4 249
+#define CK_BUS_USB2OHCI 250
+#define CK_BUS_USB2EHCI 251
+#define CK_BUS_USB3DR 252
+#define CK_KER_LPTIM1 253
+#define CK_KER_LPTIM2 254
+#define CK_KER_USART2 255
+#define CK_KER_UART4 256
+#define CK_KER_USART3 257
+#define CK_KER_UART5 258
+#define CK_KER_SPI2 259
+#define CK_KER_SPI3 260
+#define CK_KER_SPDIFRX 261
+#define CK_KER_I2C1 262
+#define CK_KER_I2C2 263
+#define CK_KER_I3C1 264
+#define CK_KER_I3C2 265
+#define CK_KER_I2C3 266
+#define CK_KER_I2C5 267
+#define CK_KER_I3C3 268
+#define CK_KER_I2C4 269
+#define CK_KER_I2C6 270
+#define CK_KER_I2C7 271
+#define CK_KER_SPI1 272
+#define CK_KER_SPI4 273
+#define CK_KER_SPI5 274
+#define CK_KER_SPI6 275
+#define CK_KER_SPI7 276
+#define CK_KER_USART1 277
+#define CK_KER_USART6 278
+#define CK_KER_UART7 279
+#define CK_KER_UART8 280
+#define CK_KER_UART9 281
+#define CK_KER_MDF1 282
+#define CK_KER_SAI1 283
+#define CK_KER_SAI2 284
+#define CK_KER_SAI3 285
+#define CK_KER_SAI4 286
+#define CK_KER_FDCAN 287
+#define CK_KER_DSIBLANE 288
+#define CK_KER_DSIPHY 289
+#define CK_KER_CSI 290
+#define CK_KER_CSITXESC 291
+#define CK_KER_CSIPHY 292
+#define CK_KER_LVDSPHY 293
+#define CK_KER_STGEN 294
+#define CK_KER_USB3PCIEPHY 295
+#define CK_KER_USB2PHY2EN 296
+#define CK_KER_I3C4 297
+#define CK_KER_SPI8 298
+#define CK_KER_I2C8 299
+#define CK_KER_LPUART1 300
+#define CK_KER_LPTIM3 301
+#define CK_KER_LPTIM4 302
+#define CK_KER_LPTIM5 303
+#define CK_KER_TSDBG 304
+#define CK_KER_TPIU 305
+#define CK_BUS_ETR 306
+#define CK_BUS_SYSATB 307
+#define CK_KER_ADC12 308
+#define CK_KER_ADC3 309
+#define CK_KER_OSPI1 310
+#define CK_KER_OSPI2 311
+#define CK_KER_FMC 312
+#define CK_KER_SDMMC1 313
+#define CK_KER_SDMMC2 314
+#define CK_KER_SDMMC3 315
+#define CK_KER_ETH1 316
+#define CK_KER_ETH2 317
+#define CK_KER_ETH1PTP 318
+#define CK_KER_ETH2PTP 319
+#define CK_KER_USB2PHY1 320
+#define CK_KER_USB2PHY2 321
+#define CK_KER_ETHSW 322
+#define CK_KER_ETHSWREF 323
+#define CK_MCO1 324
+#define CK_MCO2 325
+#define CK_KER_DTS 326
+#define CK_ETH1_RX 327
+#define CK_ETH1_TX 328
+#define CK_ETH1_MAC 329
+#define CK_ETH2_RX 330
+#define CK_ETH2_TX 331
+#define CK_ETH2_MAC 332
+#define CK_ETH1_STP 333
+#define CK_ETH2_STP 334
+#define CK_KER_USBTC 335
+#define CK_BUS_ADF1 336
+#define CK_KER_ADF1 337
+#define CK_BUS_LVDS 338
+#define CK_KER_LTDC 339
+#define CK_KER_GPU 340
+#define CK_BUS_ETHSWACMCFG 341
+#define CK_BUS_ETHSWACMMSG 342
+#define HSE_DIV2_CK 343
+
+#define STM32MP25_LAST_CLK 344
+
+#define CK_SCMI_ICN_HS_MCU 0
+#define CK_SCMI_ICN_SDMMC 1
+#define CK_SCMI_ICN_DDR 2
+#define CK_SCMI_ICN_DISPLAY 3
+#define CK_SCMI_ICN_HSL 4
+#define CK_SCMI_ICN_NIC 5
+#define CK_SCMI_ICN_VID 6
+#define CK_SCMI_FLEXGEN_07 7
+#define CK_SCMI_FLEXGEN_08 8
+#define CK_SCMI_FLEXGEN_09 9
+#define CK_SCMI_FLEXGEN_10 10
+#define CK_SCMI_FLEXGEN_11 11
+#define CK_SCMI_FLEXGEN_12 12
+#define CK_SCMI_FLEXGEN_13 13
+#define CK_SCMI_FLEXGEN_14 14
+#define CK_SCMI_FLEXGEN_15 15
+#define CK_SCMI_FLEXGEN_16 16
+#define CK_SCMI_FLEXGEN_17 17
+#define CK_SCMI_FLEXGEN_18 18
+#define CK_SCMI_FLEXGEN_19 19
+#define CK_SCMI_FLEXGEN_20 20
+#define CK_SCMI_FLEXGEN_21 21
+#define CK_SCMI_FLEXGEN_22 22
+#define CK_SCMI_FLEXGEN_23 23
+#define CK_SCMI_FLEXGEN_24 24
+#define CK_SCMI_FLEXGEN_25 25
+#define CK_SCMI_FLEXGEN_26 26
+#define CK_SCMI_FLEXGEN_27 27
+#define CK_SCMI_FLEXGEN_28 28
+#define CK_SCMI_FLEXGEN_29 29
+#define CK_SCMI_FLEXGEN_30 30
+#define CK_SCMI_FLEXGEN_31 31
+#define CK_SCMI_FLEXGEN_32 32
+#define CK_SCMI_FLEXGEN_33 33
+#define CK_SCMI_FLEXGEN_34 34
+#define CK_SCMI_FLEXGEN_35 35
+#define CK_SCMI_FLEXGEN_36 36
+#define CK_SCMI_FLEXGEN_37 37
+#define CK_SCMI_FLEXGEN_38 38
+#define CK_SCMI_FLEXGEN_39 39
+#define CK_SCMI_FLEXGEN_40 40
+#define CK_SCMI_FLEXGEN_41 41
+#define CK_SCMI_FLEXGEN_42 42
+#define CK_SCMI_FLEXGEN_43 43
+#define CK_SCMI_FLEXGEN_44 44
+#define CK_SCMI_FLEXGEN_45 45
+#define CK_SCMI_FLEXGEN_46 46
+#define CK_SCMI_FLEXGEN_47 47
+#define CK_SCMI_FLEXGEN_48 48
+#define CK_SCMI_FLEXGEN_49 49
+#define CK_SCMI_FLEXGEN_50 50
+#define CK_SCMI_FLEXGEN_51 51
+#define CK_SCMI_FLEXGEN_52 52
+#define CK_SCMI_FLEXGEN_53 53
+#define CK_SCMI_FLEXGEN_54 54
+#define CK_SCMI_FLEXGEN_55 55
+#define CK_SCMI_FLEXGEN_56 56
+#define CK_SCMI_FLEXGEN_57 57
+#define CK_SCMI_FLEXGEN_58 58
+#define CK_SCMI_FLEXGEN_59 59
+#define CK_SCMI_FLEXGEN_60 60
+#define CK_SCMI_FLEXGEN_61 61
+#define CK_SCMI_FLEXGEN_62 62
+#define CK_SCMI_FLEXGEN_63 63
+#define CK_SCMI_ICN_LS_MCU 64
+#define CK_SCMI_HSE 65
+#define CK_SCMI_LSE 66
+#define CK_SCMI_HSI 67
+#define CK_SCMI_LSI 68
+#define CK_SCMI_MSI 69
+#define CK_SCMI_HSE_DIV2 70
+#define CK_SCMI_CPU1 71
+#define CK_SCMI_SYSCPU1 72
+#define CK_SCMI_PLL2 73
+#define CK_SCMI_PLL3 74
+#define CK_SCMI_RTC 75
+#define CK_SCMI_RTCCK 76
+#define CK_SCMI_ICN_APB1 77
+#define CK_SCMI_ICN_APB2 78
+#define CK_SCMI_ICN_APB3 79
+#define CK_SCMI_ICN_APB4 80
+#define CK_SCMI_ICN_APBDBG 81
+#define CK_SCMI_TIMG1 82
+#define CK_SCMI_TIMG2 83
+#define CK_SCMI_BKPSRAM 84
+#define CK_SCMI_BSEC 85
+#define CK_SCMI_ETR 87
+#define CK_SCMI_FMC 88
+#define CK_SCMI_GPIOA 89
+#define CK_SCMI_GPIOB 90
+#define CK_SCMI_GPIOC 91
+#define CK_SCMI_GPIOD 92
+#define CK_SCMI_GPIOE 93
+#define CK_SCMI_GPIOF 94
+#define CK_SCMI_GPIOG 95
+#define CK_SCMI_GPIOH 96
+#define CK_SCMI_GPIOI 97
+#define CK_SCMI_GPIOJ 98
+#define CK_SCMI_GPIOK 99
+#define CK_SCMI_GPIOZ 100
+#define CK_SCMI_HPDMA1 101
+#define CK_SCMI_HPDMA2 102
+#define CK_SCMI_HPDMA3 103
+#define CK_SCMI_HSEM 104
+#define CK_SCMI_IPCC1 105
+#define CK_SCMI_IPCC2 106
+#define CK_SCMI_LPDMA 107
+#define CK_SCMI_RETRAM 108
+#define CK_SCMI_SRAM1 109
+#define CK_SCMI_SRAM2 110
+#define CK_SCMI_LPSRAM1 111
+#define CK_SCMI_LPSRAM2 112
+#define CK_SCMI_LPSRAM3 113
+#define CK_SCMI_VDERAM 114
+#define CK_SCMI_SYSRAM 115
+#define CK_SCMI_OSPI1 116
+#define CK_SCMI_OSPI2 117
+#define CK_SCMI_TPIU 118
+#define CK_SCMI_SYSDBG 119
+#define CK_SCMI_SYSATB 120
+#define CK_SCMI_TSDBG 121
+#define CK_SCMI_STM500 122
+
+#endif /* _DT_BINDINGS_STM32MP25_CLKS_H_ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef _FSL_EDMA_DT_BINDING_H_
+#define _FSL_EDMA_DT_BINDING_H_
+
+/* Receive Channel */
+#define FSL_EDMA_RX 0x1
+
+/* iMX8 audio remote DMA */
+#define FSL_EDMA_REMOTE 0x2
+
+/* FIFO is continue memory region */
+#define FSL_EDMA_MULTI_FIFO 0x4
+
+/* Channel need stick to even channel */
+#define FSL_EDMA_EVEN_CH 0x8
+
+/* Channel need stick to odd channel */
+#define FSL_EDMA_ODD_CH 0x10
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H
+#define _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H
+
+#ifndef PM7325_SID
+#define PM7325_SID 1
+#endif
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/* ADC channels for PM7325_ADC for PMIC7 */
+#define PM7325_ADC7_REF_GND (PM7325_SID << 8 | ADC7_REF_GND)
+#define PM7325_ADC7_1P25VREF (PM7325_SID << 8 | ADC7_1P25VREF)
+#define PM7325_ADC7_VREF_VADC (PM7325_SID << 8 | ADC7_VREF_VADC)
+#define PM7325_ADC7_DIE_TEMP (PM7325_SID << 8 | ADC7_DIE_TEMP)
+
+#define PM7325_ADC7_AMUX_THM1 (PM7325_SID << 8 | ADC7_AMUX_THM1)
+#define PM7325_ADC7_AMUX_THM2 (PM7325_SID << 8 | ADC7_AMUX_THM2)
+#define PM7325_ADC7_AMUX_THM3 (PM7325_SID << 8 | ADC7_AMUX_THM3)
+#define PM7325_ADC7_AMUX_THM4 (PM7325_SID << 8 | ADC7_AMUX_THM4)
+#define PM7325_ADC7_AMUX_THM5 (PM7325_SID << 8 | ADC7_AMUX_THM5)
+#define PM7325_ADC7_GPIO1 (PM7325_SID << 8 | ADC7_GPIO1)
+#define PM7325_ADC7_GPIO2 (PM7325_SID << 8 | ADC7_GPIO2)
+#define PM7325_ADC7_GPIO3 (PM7325_SID << 8 | ADC7_GPIO3)
+#define PM7325_ADC7_GPIO4 (PM7325_SID << 8 | ADC7_GPIO4)
+
+/* 30k pull-up1 */
+#define PM7325_ADC7_AMUX_THM1_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_30K_PU)
+#define PM7325_ADC7_AMUX_THM2_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_30K_PU)
+#define PM7325_ADC7_AMUX_THM3_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_30K_PU)
+#define PM7325_ADC7_AMUX_THM4_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_30K_PU)
+#define PM7325_ADC7_AMUX_THM5_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_30K_PU)
+#define PM7325_ADC7_GPIO1_30K_PU (PM7325_SID << 8 | ADC7_GPIO1_30K_PU)
+#define PM7325_ADC7_GPIO2_30K_PU (PM7325_SID << 8 | ADC7_GPIO2_30K_PU)
+#define PM7325_ADC7_GPIO3_30K_PU (PM7325_SID << 8 | ADC7_GPIO3_30K_PU)
+#define PM7325_ADC7_GPIO4_30K_PU (PM7325_SID << 8 | ADC7_GPIO4_30K_PU)
+
+/* 100k pull-up2 */
+#define PM7325_ADC7_AMUX_THM1_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_100K_PU)
+#define PM7325_ADC7_AMUX_THM2_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_100K_PU)
+#define PM7325_ADC7_AMUX_THM3_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_100K_PU)
+#define PM7325_ADC7_AMUX_THM4_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_100K_PU)
+#define PM7325_ADC7_AMUX_THM5_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_100K_PU)
+#define PM7325_ADC7_GPIO1_100K_PU (PM7325_SID << 8 | ADC7_GPIO1_100K_PU)
+#define PM7325_ADC7_GPIO2_100K_PU (PM7325_SID << 8 | ADC7_GPIO2_100K_PU)
+#define PM7325_ADC7_GPIO3_100K_PU (PM7325_SID << 8 | ADC7_GPIO3_100K_PU)
+#define PM7325_ADC7_GPIO4_100K_PU (PM7325_SID << 8 | ADC7_GPIO4_100K_PU)
+
+/* 400k pull-up3 */
+#define PM7325_ADC7_AMUX_THM1_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_400K_PU)
+#define PM7325_ADC7_AMUX_THM2_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_400K_PU)
+#define PM7325_ADC7_AMUX_THM3_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_400K_PU)
+#define PM7325_ADC7_AMUX_THM4_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_400K_PU)
+#define PM7325_ADC7_AMUX_THM5_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_400K_PU)
+#define PM7325_ADC7_GPIO1_400K_PU (PM7325_SID << 8 | ADC7_GPIO1_400K_PU)
+#define PM7325_ADC7_GPIO2_400K_PU (PM7325_SID << 8 | ADC7_GPIO2_400K_PU)
+#define PM7325_ADC7_GPIO3_400K_PU (PM7325_SID << 8 | ADC7_GPIO3_400K_PU)
+#define PM7325_ADC7_GPIO4_400K_PU (PM7325_SID << 8 | ADC7_GPIO4_400K_PU)
+
+/* 1/3 Divider */
+#define PM7325_ADC7_GPIO4_DIV3 (PM7325_SID << 8 | ADC7_GPIO4_DIV3)
+
+#define PM7325_ADC7_VPH_PWR (PM7325_SID << 8 | ADC7_VPH_PWR)
+
+#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H
+#define _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+#define SMB139x_1_ADC7_SMB_TEMP (SMB139x_1_SID << 8 | ADC7_SMB_TEMP)
+#define SMB139x_1_ADC7_ICHG_SMB (SMB139x_1_SID << 8 | ADC7_ICHG_SMB)
+#define SMB139x_1_ADC7_IIN_SMB (SMB139x_1_SID << 8 | ADC7_IIN_SMB)
+
+#define SMB139x_2_ADC7_SMB_TEMP (SMB139x_2_SID << 8 | ADC7_SMB_TEMP)
+#define SMB139x_2_ADC7_ICHG_SMB (SMB139x_2_SID << 8 | ADC7_ICHG_SMB)
+#define SMB139x_2_ADC7_IIN_SMB (SMB139x_2_SID << 8 | ADC7_IIN_SMB)
+
+#endif
#define ADC7_GPIO3 0x0c
#define ADC7_GPIO4 0x0d
+#define ADC7_SMB_TEMP 0x06
#define ADC7_CHG_TEMP 0x10
#define ADC7_USB_IN_V_16 0x11
#define ADC7_VDC_16 0x12
#define ADC7_CC1_ID 0x13
#define ADC7_VREF_BAT_THERM 0x15
#define ADC7_IIN_FB 0x17
+#define ADC7_ICHG_SMB 0x18
+#define ADC7_IIN_SMB 0x19
/* 30k pull-up1 */
#define ADC7_AMUX_THM1_30K_PU 0x24
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM6115_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SM6115_H
+
+/* BIMC */
+#define MASTER_AMPSS_M0 0
+#define MASTER_SNOC_BIMC_RT 1
+#define MASTER_SNOC_BIMC_NRT 2
+#define SNOC_BIMC_MAS 3
+#define MASTER_GRAPHICS_3D 4
+#define MASTER_TCU_0 5
+#define SLAVE_EBI_CH0 6
+#define BIMC_SNOC_SLV 7
+
+/* CNOC */
+#define SNOC_CNOC_MAS 0
+#define MASTER_QDSS_DAP 1
+#define SLAVE_AHB2PHY_USB 2
+#define SLAVE_APSS_THROTTLE_CFG 3
+#define SLAVE_BIMC_CFG 4
+#define SLAVE_BOOT_ROM 5
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG 6
+#define SLAVE_CAMERA_RT_THROTTLE_CFG 7
+#define SLAVE_CAMERA_CFG 8
+#define SLAVE_CLK_CTL 9
+#define SLAVE_RBCPR_CX_CFG 10
+#define SLAVE_RBCPR_MX_CFG 11
+#define SLAVE_CRYPTO_0_CFG 12
+#define SLAVE_DCC_CFG 13
+#define SLAVE_DDR_PHY_CFG 14
+#define SLAVE_DDR_SS_CFG 15
+#define SLAVE_DISPLAY_CFG 16
+#define SLAVE_DISPLAY_THROTTLE_CFG 17
+#define SLAVE_GPU_CFG 18
+#define SLAVE_GPU_THROTTLE_CFG 19
+#define SLAVE_HWKM_CORE 20
+#define SLAVE_IMEM_CFG 21
+#define SLAVE_IPA_CFG 22
+#define SLAVE_LPASS 23
+#define SLAVE_MAPSS 24
+#define SLAVE_MDSP_MPU_CFG 25
+#define SLAVE_MESSAGE_RAM 26
+#define SLAVE_CNOC_MSS 27
+#define SLAVE_PDM 28
+#define SLAVE_PIMEM_CFG 29
+#define SLAVE_PKA_CORE 30
+#define SLAVE_PMIC_ARB 31
+#define SLAVE_QDSS_CFG 32
+#define SLAVE_QM_CFG 33
+#define SLAVE_QM_MPU_CFG 34
+#define SLAVE_QPIC 35
+#define SLAVE_QUP_0 36
+#define SLAVE_RPM 37
+#define SLAVE_SDCC_1 38
+#define SLAVE_SDCC_2 39
+#define SLAVE_SECURITY 40
+#define SLAVE_SNOC_CFG 41
+#define SLAVE_TCSR 42
+#define SLAVE_TLMM 43
+#define SLAVE_USB3 44
+#define SLAVE_VENUS_CFG 45
+#define SLAVE_VENUS_THROTTLE_CFG 46
+#define SLAVE_VSENSE_CTRL_CFG 47
+#define SLAVE_SERVICE_CNOC 48
+
+/* SNOC */
+#define MASTER_CRYPTO_CORE0 0
+#define MASTER_SNOC_CFG 1
+#define MASTER_TIC 2
+#define MASTER_ANOC_SNOC 3
+#define BIMC_SNOC_MAS 4
+#define MASTER_PIMEM 5
+#define MASTER_QDSS_BAM 6
+#define MASTER_QPIC 7
+#define MASTER_QUP_0 8
+#define MASTER_IPA 9
+#define MASTER_QDSS_ETR 10
+#define MASTER_SDCC_1 11
+#define MASTER_SDCC_2 12
+#define MASTER_USB3 13
+#define SLAVE_APPSS 14
+#define SNOC_CNOC_SLV 15
+#define SLAVE_OCIMEM 16
+#define SLAVE_PIMEM 17
+#define SNOC_BIMC_SLV 18
+#define SLAVE_SERVICE_SNOC 19
+#define SLAVE_QDSS_STM 20
+#define SLAVE_TCU 21
+#define SLAVE_ANOC_SNOC 22
+
+/* CLK Virtual */
+#define MASTER_QUP_CORE_0 0
+#define SLAVE_QUP_CORE_0 1
+
+/* MMRT Virtual */
+#define MASTER_CAMNOC_HF 0
+#define MASTER_MDP_PORT0 1
+#define SLAVE_SNOC_BIMC_RT 2
+
+/* MMNRT Virtual */
+#define MASTER_CAMNOC_SF 0
+#define MASTER_VIDEO_P0 1
+#define MASTER_VIDEO_PROC 2
+#define SLAVE_SNOC_BIMC_NRT 3
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM8650_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SM8650_H
+
+#define MASTER_QSPI_0 0
+#define MASTER_QUP_1 1
+#define MASTER_QUP_3 2
+#define MASTER_SDCC_4 3
+#define MASTER_UFS_MEM 4
+#define MASTER_USB3_0 5
+#define SLAVE_A1NOC_SNOC 6
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_QUP_2 1
+#define MASTER_CRYPTO 2
+#define MASTER_IPA 3
+#define MASTER_SP 4
+#define MASTER_QDSS_ETR 5
+#define MASTER_QDSS_ETR_1 6
+#define MASTER_SDCC_2 7
+#define SLAVE_A2NOC_SNOC 8
+
+#define MASTER_QUP_CORE_0 0
+#define MASTER_QUP_CORE_1 1
+#define MASTER_QUP_CORE_2 2
+#define SLAVE_QUP_CORE_0 3
+#define SLAVE_QUP_CORE_1 4
+#define SLAVE_QUP_CORE_2 5
+
+#define MASTER_CNOC_CFG 0
+#define SLAVE_AHB2PHY_SOUTH 1
+#define SLAVE_AHB2PHY_NORTH 2
+#define SLAVE_CAMERA_CFG 3
+#define SLAVE_CLK_CTL 4
+#define SLAVE_RBCPR_CX_CFG 5
+#define SLAVE_CPR_HMX 6
+#define SLAVE_RBCPR_MMCX_CFG 7
+#define SLAVE_RBCPR_MXA_CFG 8
+#define SLAVE_RBCPR_MXC_CFG 9
+#define SLAVE_CPR_NSPCX 10
+#define SLAVE_CRYPTO_0_CFG 11
+#define SLAVE_CX_RDPM 12
+#define SLAVE_DISPLAY_CFG 13
+#define SLAVE_GFX3D_CFG 14
+#define SLAVE_I2C 15
+#define SLAVE_I3C_IBI0_CFG 16
+#define SLAVE_I3C_IBI1_CFG 17
+#define SLAVE_IMEM_CFG 18
+#define SLAVE_CNOC_MSS 19
+#define SLAVE_MX_2_RDPM 20
+#define SLAVE_MX_RDPM 21
+#define SLAVE_PCIE_0_CFG 22
+#define SLAVE_PCIE_1_CFG 23
+#define SLAVE_PCIE_RSCC 24
+#define SLAVE_PDM 25
+#define SLAVE_PRNG 26
+#define SLAVE_QDSS_CFG 27
+#define SLAVE_QSPI_0 28
+#define SLAVE_QUP_3 29
+#define SLAVE_QUP_1 30
+#define SLAVE_QUP_2 31
+#define SLAVE_SDCC_2 32
+#define SLAVE_SDCC_4 33
+#define SLAVE_SPSS_CFG 34
+#define SLAVE_TCSR 35
+#define SLAVE_TLMM 36
+#define SLAVE_UFS_MEM_CFG 37
+#define SLAVE_USB3_0 38
+#define SLAVE_VENUS_CFG 39
+#define SLAVE_VSENSE_CTRL_CFG 40
+#define SLAVE_CNOC_MNOC_CFG 41
+#define SLAVE_NSP_QTB_CFG 42
+#define SLAVE_PCIE_ANOC_CFG 43
+#define SLAVE_SERVICE_CNOC_CFG 44
+#define SLAVE_QDSS_STM 45
+#define SLAVE_TCU 46
+
+#define MASTER_GEM_NOC_CNOC 0
+#define MASTER_GEM_NOC_PCIE_SNOC 1
+#define SLAVE_AOSS 2
+#define SLAVE_IPA_CFG 3
+#define SLAVE_IPC_ROUTER_CFG 4
+#define SLAVE_TME_CFG 5
+#define SLAVE_APPSS 6
+#define SLAVE_CNOC_CFG 7
+#define SLAVE_DDRSS_CFG 8
+#define SLAVE_IMEM 9
+#define SLAVE_SERVICE_CNOC 10
+#define SLAVE_PCIE_0 11
+#define SLAVE_PCIE_1 12
+
+#define MASTER_GPU_TCU 0
+#define MASTER_SYS_TCU 1
+#define MASTER_UBWC_P_TCU 2
+#define MASTER_APPSS_PROC 3
+#define MASTER_GFX3D 4
+#define MASTER_LPASS_GEM_NOC 5
+#define MASTER_MSS_PROC 6
+#define MASTER_MNOC_HF_MEM_NOC 7
+#define MASTER_MNOC_SF_MEM_NOC 8
+#define MASTER_COMPUTE_NOC 9
+#define MASTER_ANOC_PCIE_GEM_NOC 10
+#define MASTER_SNOC_SF_MEM_NOC 11
+#define MASTER_UBWC_P 12
+#define MASTER_GIC 13
+#define SLAVE_GEM_NOC_CNOC 14
+#define SLAVE_LLCC 15
+#define SLAVE_MEM_NOC_PCIE_SNOC 16
+
+#define MASTER_LPIAON_NOC 0
+#define SLAVE_LPASS_GEM_NOC 1
+
+#define MASTER_LPASS_LPINOC 0
+#define SLAVE_LPIAON_NOC_LPASS_AG_NOC 1
+
+#define MASTER_LPASS_PROC 0
+#define SLAVE_LPICX_NOC_LPIAON_NOC 1
+
+#define MASTER_LLCC 0
+#define SLAVE_EBI1 1
+
+#define MASTER_CAMNOC_HF 0
+#define MASTER_CAMNOC_ICP 1
+#define MASTER_CAMNOC_SF 2
+#define MASTER_MDP 3
+#define MASTER_CDSP_HCP 4
+#define MASTER_VIDEO 5
+#define MASTER_VIDEO_CV_PROC 6
+#define MASTER_VIDEO_PROC 7
+#define MASTER_VIDEO_V_PROC 8
+#define MASTER_CNOC_MNOC_CFG 9
+#define SLAVE_MNOC_HF_MEM_NOC 10
+#define SLAVE_MNOC_SF_MEM_NOC 11
+#define SLAVE_SERVICE_MNOC 12
+
+#define MASTER_CDSP_PROC 0
+#define SLAVE_CDSP_MEM_NOC 1
+
+#define MASTER_PCIE_ANOC_CFG 0
+#define MASTER_PCIE_0 1
+#define MASTER_PCIE_1 2
+#define SLAVE_ANOC_PCIE_GEM_NOC 3
+#define SLAVE_SERVICE_PCIE_ANOC 4
+
+#define MASTER_A1NOC_SNOC 0
+#define MASTER_A2NOC_SNOC 1
+#define SLAVE_SNOC_GEM_NOC_SF 2
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_X1E80100_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_X1E80100_H
+
+#define MASTER_QSPI_0 0
+#define MASTER_QUP_1 1
+#define MASTER_SDCC_4 2
+#define MASTER_UFS_MEM 3
+#define SLAVE_A1NOC_SNOC 4
+
+#define MASTER_QUP_0 0
+#define MASTER_QUP_2 1
+#define MASTER_CRYPTO 2
+#define MASTER_SP 3
+#define MASTER_QDSS_ETR 4
+#define MASTER_QDSS_ETR_1 5
+#define MASTER_SDCC_2 6
+#define SLAVE_A2NOC_SNOC 7
+
+#define MASTER_DDR_PERF_MODE 0
+#define MASTER_QUP_CORE_0 1
+#define MASTER_QUP_CORE_1 2
+#define MASTER_QUP_CORE_2 3
+#define SLAVE_DDR_PERF_MODE 4
+#define SLAVE_QUP_CORE_0 5
+#define SLAVE_QUP_CORE_1 6
+#define SLAVE_QUP_CORE_2 7
+
+#define MASTER_CNOC_CFG 0
+#define SLAVE_AHB2PHY_SOUTH 1
+#define SLAVE_AHB2PHY_NORTH 2
+#define SLAVE_AHB2PHY_2 3
+#define SLAVE_AV1_ENC_CFG 4
+#define SLAVE_CAMERA_CFG 5
+#define SLAVE_CLK_CTL 6
+#define SLAVE_CRYPTO_0_CFG 7
+#define SLAVE_DISPLAY_CFG 8
+#define SLAVE_GFX3D_CFG 9
+#define SLAVE_IMEM_CFG 10
+#define SLAVE_IPC_ROUTER_CFG 11
+#define SLAVE_PCIE_0_CFG 12
+#define SLAVE_PCIE_1_CFG 13
+#define SLAVE_PCIE_2_CFG 14
+#define SLAVE_PCIE_3_CFG 15
+#define SLAVE_PCIE_4_CFG 16
+#define SLAVE_PCIE_5_CFG 17
+#define SLAVE_PCIE_6A_CFG 18
+#define SLAVE_PCIE_6B_CFG 19
+#define SLAVE_PCIE_RSC_CFG 20
+#define SLAVE_PDM 21
+#define SLAVE_PRNG 22
+#define SLAVE_QDSS_CFG 23
+#define SLAVE_QSPI_0 24
+#define SLAVE_QUP_0 25
+#define SLAVE_QUP_1 26
+#define SLAVE_QUP_2 27
+#define SLAVE_SDCC_2 28
+#define SLAVE_SDCC_4 29
+#define SLAVE_SMMUV3_CFG 30
+#define SLAVE_TCSR 31
+#define SLAVE_TLMM 32
+#define SLAVE_UFS_MEM_CFG 33
+#define SLAVE_USB2 34
+#define SLAVE_USB3_0 35
+#define SLAVE_USB3_1 36
+#define SLAVE_USB3_2 37
+#define SLAVE_USB3_MP 38
+#define SLAVE_USB4_0 39
+#define SLAVE_USB4_1 40
+#define SLAVE_USB4_2 41
+#define SLAVE_VENUS_CFG 42
+#define SLAVE_LPASS_QTB_CFG 43
+#define SLAVE_CNOC_MNOC_CFG 44
+#define SLAVE_NSP_QTB_CFG 45
+#define SLAVE_QDSS_STM 46
+#define SLAVE_TCU 47
+
+#define MASTER_GEM_NOC_CNOC 0
+#define MASTER_GEM_NOC_PCIE_SNOC 1
+#define SLAVE_AOSS 2
+#define SLAVE_TME_CFG 3
+#define SLAVE_APPSS 4
+#define SLAVE_CNOC_CFG 5
+#define SLAVE_BOOT_IMEM 6
+#define SLAVE_IMEM 7
+#define SLAVE_PCIE_0 8
+#define SLAVE_PCIE_1 9
+#define SLAVE_PCIE_2 10
+#define SLAVE_PCIE_3 11
+#define SLAVE_PCIE_4 12
+#define SLAVE_PCIE_5 13
+#define SLAVE_PCIE_6A 14
+#define SLAVE_PCIE_6B 15
+
+#define MASTER_GPU_TCU 0
+#define MASTER_PCIE_TCU 1
+#define MASTER_SYS_TCU 2
+#define MASTER_APPSS_PROC 3
+#define MASTER_GFX3D 4
+#define MASTER_LPASS_GEM_NOC 5
+#define MASTER_MNOC_HF_MEM_NOC 6
+#define MASTER_MNOC_SF_MEM_NOC 7
+#define MASTER_COMPUTE_NOC 8
+#define MASTER_ANOC_PCIE_GEM_NOC 9
+#define MASTER_SNOC_SF_MEM_NOC 10
+#define MASTER_GIC2 11
+#define SLAVE_GEM_NOC_CNOC 12
+#define SLAVE_LLCC 13
+#define SLAVE_MEM_NOC_PCIE_SNOC 14
+#define MASTER_MNOC_HF_MEM_NOC_DISP 15
+#define MASTER_ANOC_PCIE_GEM_NOC_DISP 16
+#define SLAVE_LLCC_DISP 17
+#define MASTER_ANOC_PCIE_GEM_NOC_PCIE 18
+#define SLAVE_LLCC_PCIE 19
+
+#define MASTER_LPIAON_NOC 0
+#define SLAVE_LPASS_GEM_NOC 1
+
+#define MASTER_LPASS_LPINOC 0
+#define SLAVE_LPIAON_NOC_LPASS_AG_NOC 1
+
+#define MASTER_LPASS_PROC 0
+#define SLAVE_LPICX_NOC_LPIAON_NOC 1
+
+#define MASTER_LLCC 0
+#define SLAVE_EBI1 1
+#define MASTER_LLCC_DISP 2
+#define SLAVE_EBI1_DISP 3
+#define MASTER_LLCC_PCIE 4
+#define SLAVE_EBI1_PCIE 5
+
+#define MASTER_AV1_ENC 0
+#define MASTER_CAMNOC_HF 1
+#define MASTER_CAMNOC_ICP 2
+#define MASTER_CAMNOC_SF 3
+#define MASTER_EVA 4
+#define MASTER_MDP 5
+#define MASTER_VIDEO 6
+#define MASTER_VIDEO_CV_PROC 7
+#define MASTER_VIDEO_V_PROC 8
+#define MASTER_CNOC_MNOC_CFG 9
+#define SLAVE_MNOC_HF_MEM_NOC 10
+#define SLAVE_MNOC_SF_MEM_NOC 11
+#define SLAVE_SERVICE_MNOC 12
+#define MASTER_MDP_DISP 13
+#define SLAVE_MNOC_HF_MEM_NOC_DISP 14
+
+#define MASTER_CDSP_PROC 0
+#define SLAVE_CDSP_MEM_NOC 1
+
+#define MASTER_PCIE_NORTH 0
+#define MASTER_PCIE_SOUTH 1
+#define SLAVE_ANOC_PCIE_GEM_NOC 2
+#define MASTER_PCIE_NORTH_PCIE 3
+#define MASTER_PCIE_SOUTH_PCIE 4
+#define SLAVE_ANOC_PCIE_GEM_NOC_PCIE 5
+
+#define MASTER_PCIE_3 0
+#define MASTER_PCIE_4 1
+#define MASTER_PCIE_5 2
+#define SLAVE_PCIE_NORTH 3
+#define MASTER_PCIE_3_PCIE 4
+#define MASTER_PCIE_4_PCIE 5
+#define MASTER_PCIE_5_PCIE 6
+#define SLAVE_PCIE_NORTH_PCIE 7
+
+#define MASTER_PCIE_0 0
+#define MASTER_PCIE_1 1
+#define MASTER_PCIE_2 2
+#define MASTER_PCIE_6A 3
+#define MASTER_PCIE_6B 4
+#define SLAVE_PCIE_SOUTH 5
+#define MASTER_PCIE_0_PCIE 6
+#define MASTER_PCIE_1_PCIE 7
+#define MASTER_PCIE_2_PCIE 8
+#define MASTER_PCIE_6A_PCIE 9
+#define MASTER_PCIE_6B_PCIE 10
+#define SLAVE_PCIE_SOUTH_PCIE 11
+
+#define MASTER_A1NOC_SNOC 0
+#define MASTER_A2NOC_SNOC 1
+#define MASTER_GIC1 2
+#define MASTER_USB_NOC_SNOC 3
+#define SLAVE_SNOC_GEM_NOC_SF 4
+
+#define MASTER_AGGRE_USB_NORTH 0
+#define MASTER_AGGRE_USB_SOUTH 1
+#define SLAVE_USB_NOC_SNOC 2
+
+#define MASTER_USB2 0
+#define MASTER_USB3_MP 1
+#define SLAVE_AGGRE_USB_NORTH 2
+
+#define MASTER_USB3_0 0
+#define MASTER_USB3_1 1
+#define MASTER_USB3_2 2
+#define MASTER_USB4_0 3
+#define MASTER_USB4_1 4
+#define MASTER_USB4_2 5
+#define SLAVE_AGGRE_USB_SOUTH 6
+
+#endif
#define PWRC_G12A_VPU_ID 0
#define PWRC_G12A_ETH_ID 1
#define PWRC_G12A_NNA_ID 2
+#define PWRC_G12A_ISP_ID 3
#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_C3_RESET_H
+#define _DT_BINDINGS_AMLOGIC_C3_RESET_H
+
+/* RESET0 */
+/* 0-3 */
+#define RESET_USBCTRL 4
+/* 5-7 */
+#define RESET_USBPHY20 8
+/* 9 */
+#define RESET_USB2DRD 10
+#define RESET_MIPI_DSI_HOST 11
+#define RESET_MIPI_DSI_PHY 12
+/* 13-20 */
+#define RESET_GE2D 21
+#define RESET_DWAP 22
+/* 23-31 */
+
+/* RESET1 */
+#define RESET_AUDIO 32
+/* 33-34 */
+#define RESET_DDRAPB 35
+#define RESET_DDR 36
+#define RESET_DOS_CAPB3 37
+#define RESET_DOS 38
+/* 39-46 */
+#define RESET_NNA 47
+#define RESET_ETHERNET 48
+#define RESET_ISP 49
+#define RESET_VC9000E_APB 50
+#define RESET_VC9000E_A 51
+/* 52 */
+#define RESET_VC9000E_CORE 53
+/* 54-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB 64
+#define RESET_IRCTRL 65
+/* 66 */
+#define RESET_TEMP_PII 67
+/* 68-72 */
+#define RESET_SPICC_0 73
+#define RESET_SPICC_1 74
+#define RESET_RSA 75
+
+/* 76-79 */
+#define RESET_MSR_CLK 80
+#define RESET_SPIFC 81
+#define RESET_SAR_ADC 82
+/* 83-87 */
+#define RESET_ACODEC 88
+/* 89-90 */
+#define RESET_WATCHDOG 91
+/* 92-95 */
+
+/* RESET3 */
+#define RESET_ISP_NIC_GPV 96
+#define RESET_ISP_NIC_MAIN 97
+#define RESET_ISP_NIC_VCLK 98
+#define RESET_ISP_NIC_VOUT 99
+#define RESET_ISP_NIC_ALL 100
+#define RESET_VOUT 101
+#define RESET_VOUT_VENC 102
+/* 103 */
+#define RESET_CVE_NIC_GPV 104
+#define RESET_CVE_NIC_MAIN 105
+#define RESET_CVE_NIC_GE2D 106
+#define RESET_CVE_NIC_DW 106
+#define RESET_CVE_NIC_CVE 108
+#define RESET_CVE_NIC_ALL 109
+#define RESET_CVE 110
+/* 112-127 */
+
+/* RESET4 */
+#define RESET_RTC 128
+#define RESET_PWM_AB 129
+#define RESET_PWM_CD 130
+#define RESET_PWM_EF 131
+#define RESET_PWM_GH 132
+#define RESET_PWM_IJ 133
+#define RESET_PWM_KL 134
+#define RESET_PWM_MN 135
+/* 136-137 */
+#define RESET_UART_A 138
+#define RESET_UART_B 139
+#define RESET_UART_C 140
+#define RESET_UART_D 141
+#define RESET_UART_E 142
+#define RESET_UART_F 143
+#define RESET_I2C_S_A 144
+#define RESET_I2C_M_A 145
+#define RESET_I2C_M_B 146
+#define RESET_I2C_M_C 147
+#define RESET_I2C_M_D 148
+/* 149-151 */
+#define RESET_SD_EMMC_A 152
+#define RESET_SD_EMMC_B 153
+#define RESET_SD_EMMC_C 154
+
+/* RESET5 */
+/* 160-172 */
+#define RESET_BRG_NIC_NNA 173
+#define RESET_BRG_MUX_NIC_MAIN 174
+#define RESET_BRG_AO_NIC_ALL 175
+/* 176-183 */
+#define RESET_BRG_NIC_VAPB 184
+#define RESET_BRG_NIC_SDIO_B 185
+#define RESET_BRG_NIC_SDIO_A 186
+#define RESET_BRG_NIC_EMMC 187
+#define RESET_BRG_NIC_DSU 188
+#define RESET_BRG_NIC_SYSCLK 189
+#define RESET_BRG_NIC_MAIN 190
+#define RESET_BRG_NIC_ALL 191
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Daniel Golle <daniel@makrotopia.org>
+ * Author: Daniel Golle <daniel@makrotopia.org>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7988
+#define _DT_BINDINGS_RESET_CONTROLLER_MT7988
+
+/* ETHWARP resets */
+#define MT7988_ETHWARP_RST_SWITCH 0
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7988 */
#define MT8188_INFRA_RST1_THERMAL_CTRL_RST 1
#define MT8188_INFRA_RST3_PTP_CTRL_RST 2
+#define MT8188_VDO0_RST_DISP_OVL0 0
+#define MT8188_VDO0_RST_FAKE_ENG0 1
+#define MT8188_VDO0_RST_DISP_CCORR0 2
+#define MT8188_VDO0_RST_DISP_MUTEX0 3
+#define MT8188_VDO0_RST_DISP_GAMMA0 4
+#define MT8188_VDO0_RST_DISP_DITHER0 5
+#define MT8188_VDO0_RST_DISP_WDMA0 6
+#define MT8188_VDO0_RST_DISP_RDMA0 7
+#define MT8188_VDO0_RST_DSI0 8
+#define MT8188_VDO0_RST_DSI1 9
+#define MT8188_VDO0_RST_DSC_WRAP0 10
+#define MT8188_VDO0_RST_VPP_MERGE0 11
+#define MT8188_VDO0_RST_DP_INTF0 12
+#define MT8188_VDO0_RST_DISP_AAL0 13
+#define MT8188_VDO0_RST_INLINEROT0 14
+#define MT8188_VDO0_RST_APB_BUS 15
+#define MT8188_VDO0_RST_DISP_COLOR0 16
+#define MT8188_VDO0_RST_MDP_WROT0 17
+#define MT8188_VDO0_RST_DISP_RSZ0 18
+
+#define MT8188_VDO1_RST_SMI_LARB2 0
+#define MT8188_VDO1_RST_SMI_LARB3 1
+#define MT8188_VDO1_RST_GALS 2
+#define MT8188_VDO1_RST_FAKE_ENG0 3
+#define MT8188_VDO1_RST_FAKE_ENG1 4
+#define MT8188_VDO1_RST_MDP_RDMA0 5
+#define MT8188_VDO1_RST_MDP_RDMA1 6
+#define MT8188_VDO1_RST_MDP_RDMA2 7
+#define MT8188_VDO1_RST_MDP_RDMA3 8
+#define MT8188_VDO1_RST_VPP_MERGE0 9
+#define MT8188_VDO1_RST_VPP_MERGE1 10
+#define MT8188_VDO1_RST_VPP_MERGE2 11
+#define MT8188_VDO1_RST_VPP_MERGE3 12
+#define MT8188_VDO1_RST_VPP_MERGE4 13
+#define MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC 14
+#define MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC 15
+#define MT8188_VDO1_RST_DISP_MUTEX 16
+#define MT8188_VDO1_RST_MDP_RDMA4 17
+#define MT8188_VDO1_RST_MDP_RDMA5 18
+#define MT8188_VDO1_RST_MDP_RDMA6 19
+#define MT8188_VDO1_RST_MDP_RDMA7 20
+#define MT8188_VDO1_RST_DP_INTF1_MMCK 21
+#define MT8188_VDO1_RST_DPI0_MM_CK 22
+#define MT8188_VDO1_RST_DPI1_MM_CK 23
+#define MT8188_VDO1_RST_MERGE0_DL_ASYNC 24
+#define MT8188_VDO1_RST_MERGE1_DL_ASYNC 25
+#define MT8188_VDO1_RST_MERGE2_DL_ASYNC 26
+#define MT8188_VDO1_RST_MERGE3_DL_ASYNC 27
+#define MT8188_VDO1_RST_MERGE4_DL_ASYNC 28
+#define MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC 29
+#define MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC 30
+#define MT8188_VDO1_RST_PADDING0 31
+#define MT8188_VDO1_RST_PADDING1 32
+#define MT8188_VDO1_RST_PADDING2 33
+#define MT8188_VDO1_RST_PADDING3 34
+#define MT8188_VDO1_RST_PADDING4 35
+#define MT8188_VDO1_RST_PADDING5 36
+#define MT8188_VDO1_RST_PADDING6 37
+#define MT8188_VDO1_RST_PADDING7 38
+#define MT8188_VDO1_RST_DISP_RSZ0 39
+#define MT8188_VDO1_RST_DISP_RSZ1 40
+#define MT8188_VDO1_RST_DISP_RSZ2 41
+#define MT8188_VDO1_RST_DISP_RSZ3 42
+#define MT8188_VDO1_RST_HDR_VDO_FE0 43
+#define MT8188_VDO1_RST_HDR_GFX_FE0 44
+#define MT8188_VDO1_RST_HDR_VDO_BE 45
+#define MT8188_VDO1_RST_HDR_VDO_FE1 46
+#define MT8188_VDO1_RST_HDR_GFX_FE1 47
+#define MT8188_VDO1_RST_DISP_MIXER 48
+#define MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC 49
+#define MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC 50
+#define MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC 51
+#define MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC 52
+#define MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC 53
+
#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8188 */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8650_H
+#define _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8650_H
+
+#define GPUCC_GPU_CC_ACD_BCR 0
+#define GPUCC_GPU_CC_CX_BCR 1
+#define GPUCC_GPU_CC_FAST_HUB_BCR 2
+#define GPUCC_GPU_CC_FF_BCR 3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR 4
+#define GPUCC_GPU_CC_GMU_BCR 5
+#define GPUCC_GPU_CC_GX_BCR 6
+#define GPUCC_GPU_CC_XO_BCR 7
+#define GPUCC_GPU_CC_GX_ACD_IROOT_BCR 8
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author(s): Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+ */
+
+#ifndef _DT_BINDINGS_STM32MP25_RESET_H_
+#define _DT_BINDINGS_STM32MP25_RESET_H_
+
+#define TIM1_R 0
+#define TIM2_R 1
+#define TIM3_R 2
+#define TIM4_R 3
+#define TIM5_R 4
+#define TIM6_R 5
+#define TIM7_R 6
+#define TIM8_R 7
+#define TIM10_R 8
+#define TIM11_R 9
+#define TIM12_R 10
+#define TIM13_R 11
+#define TIM14_R 12
+#define TIM15_R 13
+#define TIM16_R 14
+#define TIM17_R 15
+#define TIM20_R 16
+#define LPTIM1_R 17
+#define LPTIM2_R 18
+#define LPTIM3_R 19
+#define LPTIM4_R 20
+#define LPTIM5_R 21
+#define SPI1_R 22
+#define SPI2_R 23
+#define SPI3_R 24
+#define SPI4_R 25
+#define SPI5_R 26
+#define SPI6_R 27
+#define SPI7_R 28
+#define SPI8_R 29
+#define SPDIFRX_R 30
+#define USART1_R 31
+#define USART2_R 32
+#define USART3_R 33
+#define UART4_R 34
+#define UART5_R 35
+#define USART6_R 36
+#define UART7_R 37
+#define UART8_R 38
+#define UART9_R 39
+#define LPUART1_R 40
+#define IS2M_R 41
+#define I2C1_R 42
+#define I2C2_R 43
+#define I2C3_R 44
+#define I2C4_R 45
+#define I2C5_R 46
+#define I2C6_R 47
+#define I2C7_R 48
+#define I2C8_R 49
+#define SAI1_R 50
+#define SAI2_R 51
+#define SAI3_R 52
+#define SAI4_R 53
+#define MDF1_R 54
+#define MDF2_R 55
+#define FDCAN_R 56
+#define HDP_R 57
+#define ADC12_R 58
+#define ADC3_R 59
+#define ETH1_R 60
+#define ETH2_R 61
+#define USB2_R 62
+#define USB2PHY1_R 63
+#define USB2PHY2_R 64
+#define USB3DR_R 65
+#define USB3PCIEPHY_R 66
+#define USBTC_R 67
+#define ETHSW_R 68
+#define SDMMC1_R 69
+#define SDMMC1DLL_R 70
+#define SDMMC2_R 71
+#define SDMMC2DLL_R 72
+#define SDMMC3_R 73
+#define SDMMC3DLL_R 74
+#define GPU_R 75
+#define LTDC_R 76
+#define DSI_R 77
+#define LVDS_R 78
+#define CSI_R 79
+#define DCMIPP_R 80
+#define CCI_R 81
+#define VDEC_R 82
+#define VENC_R 83
+#define WWDG1_R 84
+#define WWDG2_R 85
+#define VREF_R 86
+#define DTS_R 87
+#define CRC_R 88
+#define SERC_R 89
+#define OSPIIOM_R 90
+#define I3C1_R 91
+#define I3C2_R 92
+#define I3C3_R 93
+#define I3C4_R 94
+#define IWDG2_KER_R 95
+#define IWDG4_KER_R 96
+#define RNG_R 97
+#define PKA_R 98
+#define SAES_R 99
+#define HASH_R 100
+#define CRYP1_R 101
+#define CRYP2_R 102
+#define PCIE_R 103
+#define OSPI1_R 104
+#define OSPI1DLL_R 105
+#define OSPI2_R 106
+#define OSPI2DLL_R 107
+#define FMC_R 108
+#define DBG_R 109
+#define GPIOA_R 110
+#define GPIOB_R 111
+#define GPIOC_R 112
+#define GPIOD_R 113
+#define GPIOE_R 114
+#define GPIOF_R 115
+#define GPIOG_R 116
+#define GPIOH_R 117
+#define GPIOI_R 118
+#define GPIOJ_R 119
+#define GPIOK_R 120
+#define GPIOZ_R 121
+#define HPDMA1_R 122
+#define HPDMA2_R 123
+#define HPDMA3_R 124
+#define LPDMA_R 125
+#define HSEM_R 126
+#define IPCC1_R 127
+#define IPCC2_R 128
+#define C2_HOLDBOOT_R 129
+#define C1_HOLDBOOT_R 130
+#define C1_R 131
+#define C1P1POR_R 132
+#define C1P1_R 133
+#define C2_R 134
+#define C3_R 135
+#define SYS_R 136
+#define VSW_R 137
+#define C1MS_R 138
+#define DDRCP_R 139
+#define DDRCAPB_R 140
+#define DDRPHYCAPB_R 141
+#define DDRCFG_R 142
+#define DDR_R 143
+
+#define STM32MP25_LAST_RESET 144
+
+#define RST_SCMI_C1_R 0
+#define RST_SCMI_C2_R 1
+#define RST_SCMI_C1_HOLDBOOT_R 2
+#define RST_SCMI_C2_HOLDBOOT_R 3
+#define RST_SCMI_FMC 4
+#define RST_SCMI_OSPI1 5
+#define RST_SCMI_OSPI1DLL 6
+#define RST_SCMI_OSPI2 7
+#define RST_SCMI_OSPI2DLL 8
+
+#endif /* _DT_BINDINGS_STM32MP25_RESET_H_ */
#define ROCKCHIP_VOP2_EP_LVDS0 5
#define ROCKCHIP_VOP2_EP_MIPI1 6
#define ROCKCHIP_VOP2_EP_LVDS1 7
+#define ROCKCHIP_VOP2_EP_HDMI1 8
+#define ROCKCHIP_VOP2_EP_EDP1 9
+#define ROCKCHIP_VOP2_EP_DP0 10
+#define ROCKCHIP_VOP2_EP_DP1 11
#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
- interrupt-controller;
msi-controller;
al,msi-base-spi = <96>;
al,msi-num-spis = <64>;
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
- tpmdev@0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- tpmdev@0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
status = "okay";
tpm: tpm@2e {
- compatible = "tcg,tpm-tis-i2c";
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
reg = <0x2e>;
};
};
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
interrupts = <40>;
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
reg = <0x1e780500 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
reg = <0x1e780600 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c1: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c2: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c3: i2c-bus@200 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x200 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c4: i2c-bus@280 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x280 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c5: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c6: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c7: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c8: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c9: i2c-bus@500 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x500 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c10: i2c-bus@580 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x580 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c11: i2c-bus@600 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x600 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c12: i2c-bus@680 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x680 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c13: i2c-bus@700 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x700 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c14: i2c-bus@780 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x780 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
i2c15: i2c-bus@800 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x800 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
- tpmdev@0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&mailbox>;
interrupts = <0>;
};
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
i2c1: i2c@1800b000 {
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 42 1>,
<&pinctrl 1 44 3>,
gpio-controller;
ngpios = <4>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
gpio-controller;
ngpios = <32>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
gpio-controller;
ngpios = <4>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
};
// SPDX-License-Identifier: GPL-2.0
#include "bcm2835-rpi.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
/ {
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
+
+&xhci {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
};
};
+ xhci: usb@7e9c0000 {
+ compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+ reg = <0x0 0x7e9c0000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ /* DWC2 and this IP block share the same USB PHY,
+ * enabling both at the same time results in lockups.
+ * So keep this node disabled and let the bootloader
+ * decide which interface should be enabled.
+ */
+ status = "disabled";
+ };
+
v3d: gpu@7ec00000 {
compatible = "brcm,2711-v3d";
reg = <0x0 0x7ec00000 0x4000>,
interrupt-names = "nand";
};
+ serial@4400 {
+ compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+ reg = <0x4400 0x1e0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
bootlut: bootlut@8000 {
compatible = "brcm,bcm63138-bootlut";
reg = <0x8000 0x50>;
* We have slots (IDSEL) 1 and 2 with one assigned IRQ
* each handling all IRQs.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 1 */
<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
* The slots have Ethernet, Ethernet, NEC and MPCI.
* The IDSELs are 11, 12, 13, 14.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 11 - Ethernet A */
<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
#address-cells = <1>;
#size-cells = <0>;
+ /*
+ * PHY 0..4 are internal to the MV88E6060 switch but appear
+ * as independent devices.
+ */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ /* Altima AMI101L used by the WAN port */
phy9: ethernet-phy@9 {
reg = <9>;
};
port@0 {
reg = <0>;
label = "lan1";
+ phy-handle = <&phy0>;
};
port@1 {
reg = <1>;
label = "lan2";
+ phy-handle = <&phy1>;
};
port@2 {
reg = <2>;
label = "lan3";
+ phy-handle = <&phy2>;
};
port@3 {
reg = <3>;
label = "lan4";
+ phy-handle = <&phy3>;
};
port@5 {
status = "disabled";
};
- nand0: nand@ff900000 {
+ nand0: nand-controller@ff900000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "altr,socfpga-denali-nand";
status = "disabled";
};
- nand: nand@ffb90000 {
+ nand: nand-controller@ffb90000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "altr,socfpga-denali-nand";
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <3>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <4>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
gpio-fan {
compatible = "gpio-fan";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0 3000 1>;
+ gpio-fan,speed-map = <0 0>, <3000 1>;
pinctrl-0 = <&fan_pins>;
pinctrl-names = "default";
};
};
};
- switch: switch@10 {
+ switch: ethernet-switch@10 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x10>;
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
#address-cells = <1>;
#size-cells = <0>;
- switchphy0: switchphy@0 {
+ switchphy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy1: switchphy@1 {
+ switchphy1: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy2: switchphy@2 {
+ switchphy2: ethernet-phy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy3: switchphy@3 {
+ switchphy3: ethernet-phy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
gpio-fan {
gpio-fan,speed-map =
- < 0 3
- 950 2
- 1400 1
- 1800 0>;
+ < 0 3>,
+ < 950 2>,
+ <1400 1>,
+ <1800 0>;
};
};
gpio-fan {
gpio-fan,speed-map =
- < 0 3
- 800 2
- 1050 1
- 1300 0>;
+ < 0 3>,
+ < 800 2>,
+ <1050 1>,
+ <1300 0>;
};
};
&gpio2 0 GPIO_ACTIVE_HIGH
&gpio2 1 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 1000 1
- 1150 2
- 1350 4
- 1500 3
- 1650 5
- 1750 6
- 1900 7 >;
+ gpio-fan,speed-map = < 0 0>,
+ <1000 1>,
+ <1150 2>,
+ <1350 4>,
+ <1500 3>,
+ <1650 5>,
+ <1750 6>,
+ <1900 7>;
};
gpio-leds {
pinctrl-0 = <&mdio_pins>;
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
#interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio1>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&switch_interrupt_pins>;
pinctrl-names = "default";
- #size-cells = <0>;
reg = <0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1: switch0phy1@1 {
+ switch0phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy2: switch0phy2@2 {
+ switch0phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy3: switch0phy3@3 {
+ switch0phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy4: switch0phy4@4 {
+ switch0phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy5: switch0phy5@5 {
+ switch0phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy6: switch0phy6@6 {
+ switch0phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy7: switch0phy7@7 {
+ switch0phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy8: switch0phy8@8 {
+ switch0phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
};
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
ethernet = <ð0>;
phy-mode = "rgmii";
reg = <0>;
};
};
- port@1 {
+ ethernet-port@1 {
label = "lan1";
phy-handle = <&switch0phy1>;
reg = <1>;
};
- port@2 {
+ ethernet-port@2 {
label = "lan2";
phy-handle = <&switch0phy2>;
reg = <2>;
};
- port@3 {
+ ethernet-port@3 {
label = "lan3";
phy-handle = <&switch0phy3>;
reg = <3>;
};
- port@4 {
+ ethernet-port@4 {
label = "lan4";
phy-handle = <&switch0phy4>;
reg = <4>;
};
- port@5 {
+ ethernet-port@5 {
label = "lan5";
phy-handle = <&switch0phy5>;
reg = <5>;
};
- port@6 {
+ ethernet-port@6 {
label = "lan6";
phy-handle = <&switch0phy6>;
reg = <6>;
};
- port@7 {
+ ethernet-port@7 {
label = "lan7";
phy-handle = <&switch0phy7>;
reg = <7>;
};
- port@8 {
+ ethernet-port@8 {
label = "lan8";
phy-handle = <&switch0phy8>;
reg = <8>;
};
- port@9 {
+ ethernet-port@9 {
/* 88X3310P external phy */
label = "lan9";
phy-handle = <&phy1>;
reg = <9>;
};
- port@a {
+ ethernet-port@a {
/* 88X3310P external phy */
label = "lan10";
phy-handle = <&phy2>;
};
&mdio {
- switch0: switch0@4 {
+ switch0: ethernet-switch@4 {
compatible = "marvell,mv88e6190";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan8";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan7";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan6";
phy-handle = <&switch0phy2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan5";
phy-handle = <&switch0phy3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "lan4";
phy-handle = <&switch0phy4>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "lan3";
phy-handle = <&switch0phy5>;
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "lan2";
phy-handle = <&switch0phy6>;
};
- port@8 {
+ ethernet-port@8 {
reg = <8>;
label = "lan1";
phy-handle = <&switch0phy7>;
};
- port@10 {
+ ethernet-port@10 {
reg = <10>;
phy-mode = "2500base-x";
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@1 {
+ switch0phy0: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy1: switch0phy1@2 {
+ switch0phy1: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy2: switch0phy2@3 {
+ switch0phy2: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy3: switch0phy3@4 {
+ switch0phy3: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy4: switch0phy4@5 {
+ switch0phy4: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy5: switch0phy5@6 {
+ switch0phy5: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy6: switch0phy6@7 {
+ switch0phy6: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy7: switch0phy7@8 {
+ switch0phy7: ethernet-phy@8 {
reg = <0x8>;
};
};
};
&mdio {
- switch0: switch0@4 {
+ switch0: ethernet-switch@4 {
compatible = "marvell,mv88e6085";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan4";
phy-handle = <&switch0phy2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "2500base-x";
ethernet = <ð1>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@11 {
+ switch0phy0: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1@12 {
+ switch0phy1: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2@13 {
+ switch0phy2: ethernet-phy@13 {
reg = <0x13>;
};
- switch0phy3: switch0phy3@14 {
+ switch0phy3: ethernet-phy@14 {
reg = <0x14>;
};
};
&mdio {
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "sgmii";
ethernet = <ð2>;
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
<&gpio1 17 GPIO_ACTIVE_HIGH>,
<&gpio1 16 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 1500 1
- 2500 2
- 3000 3
- 3400 4
- 3700 5
- 3900 6
- 4000 7>;
+ gpio-fan,speed-map = < 0 0>,
+ <1500 1>,
+ <2500 2>,
+ <3000 3>,
+ <3400 4>,
+ <3700 5>,
+ <3900 6>,
+ <4000 7>;
#cooling-cells = <2>;
};
};
/* Switch MV88E6176 at address 0x10 */
- switch@10 {
+ ethernet-switch@10 {
pinctrl-names = "default";
pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
dsa,member = <0 0>;
reg = <0x10>;
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- ports@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
};
- ports@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
};
- ports@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- ports@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
};
- ports@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan4";
};
- ports@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
};
};
- ports@6 {
+ ethernet-port@6 {
reg = <6>;
ethernet = <ð0>;
phy-mode = "rgmii-id";
&mdio {
status = "okay";
- switch@4 {
+ ethernet-switch@4 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <4>;
pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
pinctrl-names = "default";
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan5";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan4";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan3";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan2";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan1";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "1000base-x";
};
};
- port@6 {
+ ethernet-port@6 {
/* 88E1512 external phy */
reg = <6>;
label = "lan6";
gpio-fan {
compatible = "gpio-fan";
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 3000 1>;
+ gpio-fan,speed-map = < 0 0>,
+ <3000 1>;
};
};
&mdio {
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "internet";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "rgmii-id";
ethernet = <ð0>;
pinctrl-names = "default";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0
- 3000 1
- 6000 2>;
+ gpio-fan,speed-map = <0 0>,
+ <3000 1>,
+ <6000 2>;
};
gpio_poweroff {
gpio2: gpio-expander@20 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x20>;
gpio3: gpio-expander@21 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x21>;
gpios = <&gpio0 17 GPIO_ACTIVE_LOW
&gpio0 16 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
&gpio1 15 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
pinctrl-names = "default";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW
&gpio0 18 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ gpio-fan,speed-map =
+ <0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
&gpio1 1 GPIO_ACTIVE_LOW
&gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
- < 0 0
- 1500 15
- 1700 14
- 1800 13
- 2100 12
- 3100 11
- 3300 10
- 4300 9
- 5500 8>;
+ < 0 0>,
+ <1500 15>,
+ <1700 14>,
+ <1800 13>,
+ <2100 12>,
+ <3100 11>,
+ <3300 10>,
+ <4300 9>,
+ <5500 8>;
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
&gpio1 1 GPIO_ACTIVE_LOW
&gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
- < 0 0
- 3000 15
- 3180 14
- 4140 13
- 4570 12
- 6760 11
- 7140 10
- 7980 9
- 9200 8>;
+ < 0 0>,
+ <3000 15>,
+ <3180 14>,
+ <4140 13>,
+ <4570 12>,
+ <6760 11>,
+ <7140 10>,
+ <7980 9>,
+ <9200 8>;
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2200 1>,
+ <2500 2>,
+ <3000 4>,
+ <3300 3>,
+ <3700 5>,
+ <3800 6>,
+ <4200 7>;
};
gpio-fan-150-15-18 {
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2200 1
- 2500 2
- 3000 4
- 3300 3
- 3700 5
- 3800 6
- 4200 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2200 1>,
+ <2500 2>,
+ <3000 4>,
+ <3300 3>,
+ <3700 5>,
+ <3800 6>,
+ <4200 7>;
};
gpio-fan-100-32-35 {
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-18 {
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-35-1 {
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-fan-100-15-35-3 {
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
&gpio1 12 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = < 0 0
- 2500 1
- 3100 2
- 3800 3
- 4600 4
- 4800 5
- 4900 6
- 5000 7 >;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <2500 1>,
+ <3100 2>,
+ <3800 3>,
+ <4600 4>,
+ <4800 5>,
+ <4900 6>,
+ <5000 7>;
};
gpio-leds-alarm-12 {
pinctrl-names = "default";
gpio-fan,speed-map =
- <0 3
- 1500 2
- 3250 1
- 5000 0>;
+ < 0 3>,
+ <1500 2>,
+ <3250 1>,
+ <5000 0>;
};
};
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
- mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
&sdmmc0 {
bus-width = <4>;
- mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
<3 IRQ_TYPE_LEVEL_HIGH>,
<4 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
interrupt-controller;
};
gpio-controller;
#gpio-cells = <2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
interrupt-controller;
};
tegra_ac97: ac97@70002000 {
status = "okay";
nvidia,codec-reset-gpio =
- <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
nvidia,codec-sync-gpio =
<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
};
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
pinctrl-0 = <&pinctrl_weim>;
status = "okay";
- nor: nor@0,0 {
+ nor: flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <4>;
pinctrl-0 = <&pinctrl_weim>;
status = "okay";
- nor: nor@0,0 {
+ nor: flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
interrupt-parent = <&aitc>;
ranges;
- aipi@200000 {
+ bus@200000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- aipi@210000 {
+ bus@210000 {
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- esram: esram@300000 {
+ esram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x20000>;
+ ranges = <0 0x00300000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
};
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
bus-width = <18>;
display-timings {
native-mode = <&qvga_timings>;
- qvga_timings: 320x240 {
+ qvga_timings: timing0 {
clock-frequency = <6500000>;
hactive = <320>;
vactive = <240>;
bus-width = <18>;
display-timings {
native-mode = <&dvi_svga_timings>;
- dvi_svga_timings: 800x600 {
+ dvi_svga_timings: timing0 {
clock-frequency = <40000000>;
hactive = <800>;
vactive = <600>;
bus-width = <18>;
display-timings {
native-mode = <&dvi_vga_timings>;
- dvi_vga_timings: 640x480 {
+ dvi_vga_timings: timing0 {
clock-frequency = <31250000>;
hactive = <640>;
vactive = <480>;
bus-width = <18>;
display-timings {
native-mode = <&wvga_timings>;
- wvga_timings: 640x480 {
+ wvga_timings: timing0 {
hactive = <640>;
vactive = <480>;
hback-porch = <45>;
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ #sound-dai-cells = <0>;
clocks = <&clks 129>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
};
+ usbphy0: usb-phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f80000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <3>;
status = "disabled";
};
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f84000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <10>;
status = "disabled";
};
compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
reg = <0x43f98000 0x4000>;
clocks = <&clks 48>;
- clock-names = "";
+ clock-names = "ipg";
interrupts = <4>;
status = "disabled";
};
};
kpp: kpp@43fa8000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
reg = <0x43fa8000 0x4000>;
clocks = <&clks 102>;
- clock-names = "";
interrupts = <24>;
status = "disabled";
};
};
iim: efuse@53ff0000 {
- compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+ compatible = "fsl,imx25-iim";
reg = <0x53ff0000 0x4000>;
interrupts = <19>;
clocks = <&clks 99>;
#size-cells = <1>;
};
- emi@80000000 {
+ bus@80000000 {
compatible = "fsl,emi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
-
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy@0 {
- reg = <0>;
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-
- usbphy1: usb-phy@1 {
- reg = <1>;
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
- };
};
fsl,pcr = <0xfae80083>; /* non-standard but required */
display-timings {
native-mode = <&timing0>;
- timing0: 800x480 {
+ timing0: timing0 {
clock-frequency = <33000033>;
hactive = <800>;
vactive = <480>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- user {
+ led-user {
label = "Heartbeat";
gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
&weim {
status = "okay";
- nor: nor@0,0 {
+ nor: flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
display-timings {
native-mode = <&timing0>;
- timing0: 320x240 {
+ timing0: timing0 {
clock-frequency = <6500000>;
hactive = <320>;
vactive = <240>;
reg = <0xa0000000 0x08000000>;
};
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+
+ usbphy0: usbphy {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
native-mode = <&timing0>;
- timing0: 640x480 {
+ timing0: timing0 {
hactive = <640>;
vactive = <480>;
hback-porch = <112>;
display-timings {
native-mode = <&timing0>;
- timing0: 240x320 {
+ timing0: timing0 {
clock-frequency = <5500000>;
hactive = <240>;
vactive = <320>;
regulator-always-on;
};
- usbphy {
- usbphy2: usbphy@2 {
- compatible = "usb-nop-xceiv";
- reg = <2>;
- vcc-supply = <®_5v0>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+ usbphy2: usbphy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_5v0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
regulator-max-microvolt = <5000000>;
};
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- vcc-supply = <&sw3_reg>;
- clocks = <&clks IMX27_CLK_DUMMY>;
- clock-names = "main_clk";
- #phy-cells = <0>;
- };
+
+ usbphy0: usbphy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&sw3_reg>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
};
};
status = "okay";
/* SSI0 <=> PINS_4 (MC13783 Audio) */
- ssi0 {
+ mux-ssi0 {
fsl,audmux-port = <0>;
fsl,port-config = <0xcb205000>;
};
- pins4 {
+ mux-pins4 {
fsl,audmux-port = <2>;
fsl,port-config = <0x00001000>;
};
reg = <0x52>;
};
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
&weim {
status = "okay";
- nor: nor@0,0 {
+ nor: flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
interrupt-parent = <&aitc>;
ranges;
- aipi1: aipi@10000000 { /* AIPI1 */
+ aipi1: bus@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
- aipi2: aipi@10020000 { /* AIPI2 */
+ aipi2: bus@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
iram: sram@ffff4c00 {
compatible = "mmio-sram";
reg = <0xffff4c00 0xb400>;
+ ranges = <0 0xffff4c00 0xb400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
};
};
display-0 {
- #address-cells =<1>;
+ #address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
compatible = "ilitek,ili251x";
reg = <0x41>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
compatible = "ilitek,ili251x";
reg = <0x41>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
compatible = "eeti,exc80h60";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
compatible = "eeti,exc80h60";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
compatible = "eeti,exc80h84";
reg = <0x2a>;
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_q7_gpio0>;
+ pinctrl-0 = <&pinctrl_q7_gpio0>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
touchscreen-inverted-x;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can1_power>;
regulator-name = "can1_supply";
+ startup-delay-us = <1000>;
};
reg_can2_supply: regulator-can2-supply {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can2_power>;
regulator-name = "can2_supply";
+ startup-delay-us = <1000>;
};
};
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
bridge@2,1 {
compatible = "pci10b5,8605";
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
ethernet@3,0 {
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
switch_nic: ethernet@4,0 {
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
};
};
compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
panel0: lvds-panel0 {
- compatible = "panel-lvds";
+ compatible = "panel-lvds";
backlight = <&backlight_lvds>;
width-mm = <152>;
height-mm = <91>;
};
panel1: lvds-panel1 {
- compatible = "panel-lvds";
+ compatible = "panel-lvds";
width-mm = <152>;
height-mm = <91>;
data-mapping = "jeida-18";
model = "Toradex Apalis iMX6Q/D Module";
compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+ aliases {
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC1 slot */
+ mmc2 = &usdhc2; /* SD1 slot */
+ /delete-property/ mmc3;
+ };
+
/* Will be filled by the bootloader */
memory@10000000 {
device_type = "memory";
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-max-microvolt = <5000000>;
blocks = <0x5>;
id = <0>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
interrupt-parent = <&gpio4>;
irq-trigger = <0x1>;
pinctrl-names = "default";
model = "Toradex Colibri iMX6DL/S Module";
compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+ aliases {
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC/SD Slot */
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <0 45 63 88 119 158 203 255>;
blocks = <0x5>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio6>;
- interrupt-controller;
id = <0>;
irq-trigger = <0x1>;
pinctrl-names = "default";
clk_codec: clock-codec {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <12000000>;
+ clock-frequency = <12000000>;
};
sound {
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
onkey {
compatible = "dlg,da9063-onkey";
pinctrl_pwm1: pwm1grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
>;
};
reg = <0x58>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+ #interrupt-cells = <2>;
interrupt-controller;
regulators {
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touch>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
<&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
"txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
fsl,asrc-width = <16>;
status = "okay";
};
tpm_tis: tpm@1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
- compatible = "tcg,tpm_tis-spi";
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
spi-max-frequency = <20000000>;
interrupt-parent = <&gpio5>;
};
};
- /* NXP SE97BTP with temperature sensor + eeprom */
+ /* LM75A temperature sensor, TQMa7x 01xx */
+ lm75a: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
se97b: temperature-sensor-eeprom@1e {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1e>;
- status = "okay";
};
/* ST M24C64 */
/* Required to properly pass MAC addresses from bootloader. */
ethernet0 = &fec1;
ethernet1 = &fec2;
+ mmc0 = &usdhc3; /* eMMC */
+ mmc1 = &usdhc1; /* MMC/SD slot */
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
};
memory@80000000 {
* TCG specification - Section 6.4.1 Clocking:
* TPM shall support a SPI clock frequency range of 10-24 MHz.
*/
- st33htph: tpm-tis@0 {
+ st33htph: tpm@0 {
compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <24000000>;
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <®_wlreg_on>;
- vqmmc-supply =<®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
status = "okay";
brcmf: wifi@1 {
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
reg = <0x25>;
};
assigned-clock-rates = <0>, <32768>;
};
+&cpu0 {
+ cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+ cpu-supply = <&sw1a_reg>;
+};
+
&ecspi3 {
cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_i2c2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
};
&ca_funnel_in_ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
interrupt-parent = <&gpc>;
ranges;
+ ocram: sram@900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&clks IMX7D_OCRAM_CLK>;
+ };
+
funnel@30041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30041000 0x1000>;
clock-names = "apb_pclk";
ca_funnel_in_ports: in-ports {
- port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
ca_funnel_in_port0: endpoint {
remote-endpoint = <&etm0_out_port>;
};
nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+ #thermal-sensor-cells = <0>;
};
};
clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
<&clks IMX7D_ECSPI4_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
status = "disabled";
};
};
lcdif: lcdif@30730000 {
- compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
reg = <0x30730000 0x10000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
};
};
};
+
+ mipi_dsi: dsi@30760000 {
+ compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30760000 0x400>;
+ clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "bus_clk", "sclk_mipi";
+ assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+ <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+ assigned-clock-rates = <0>, <333000000>;
+ power-domains = <&pgc_mipi_phy>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,burst-clock-frequency = <891000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "disabled";
+ };
};
aips3: bus@30800000 {
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
status = "disabled";
};
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
status = "disabled";
};
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
status = "disabled";
};
gpmi: nand-controller@33002000 {
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
pinctrl_pwm2: pwm2grp {
fsl,pins = <
- /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ /* 100 k PD, DSE 120 OHM, SPEED LO */
MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050
>;
};
sct_pwm: pwm@40000000 {
compatible = "nxp,lpc1850-sct-pwm";
reg = <0x40000000 0x1000>;
- clocks =<&ccu1 CLK_CPU_SCT>;
+ clocks = <&ccu1 CLK_CPU_SCT>;
clock-names = "pwm";
resets = <&rgu 37>;
#pwm-cells = <3>;
compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e00 0x0 0x8>;
msi-controller;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
};
msi2: msi-controller@1570e08 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
- gpios = <
- &gpio1 24 0 /* SDA */
- &gpio1 22 0 /* SCL */
- >;
+ sda-gpios = <&gpio1 24 0>;
+ scl-gpios = <&gpio1 22 0>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
- gpios = <
- &gpio0 31 0 /* SDA */
- &gpio0 30 0 /* SCL */
- >;
+ sda-gpios = <&gpio0 31 0>;
+ scl-gpios = <&gpio0 30 0>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
touch: touch@20 {
reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <0>;
interrupts = <16>;
gpio-controller;
};
gpio1: gpio@1 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <1>;
interrupts = <17>;
gpio-controller;
};
gpio2: gpio@2 {
- compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx23-gpio";
reg = <2>;
interrupts = <18>;
gpio-controller;
status = "disabled";
};
- dma_apbx: dma-apbx@80024000 {
+ dma_apbx: dma-controller@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 0x2000>;
interrupts = <7>, <5>, <9>, <26>,
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+ compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
memory@40000000 {
reg = <0x40000000 0x08000000>;
+ device_type = "memory";
};
reg_3v3: regulator-reg-3v3 {
sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ #sound-dai-cells = <0>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
clocks = <&mclk>;
reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <0>;
interrupts = <127>;
gpio-controller;
};
gpio1: gpio@1 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <1>;
interrupts = <126>;
gpio-controller;
};
gpio2: gpio@2 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <2>;
interrupts = <125>;
gpio-controller;
};
gpio3: gpio@3 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <3>;
interrupts = <124>;
gpio-controller;
};
gpio4: gpio@4 {
- compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ compatible = "fsl,imx28-gpio";
reg = <4>;
interrupts = <123>;
gpio-controller;
status = "disabled";
};
- dma_apbx: dma-apbx@80024000 {
+ dma_apbx: dma-controller@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 0x2000>;
interrupts = <78>, <79>, <66>, <0>,
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+ compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <®_3v3>;
- status = "okay";
+ status = "okay";
};
&dcu0 {
#address-cells = <1>;
#size-cells = <0>;
/* PTD12 ->RPIO[91] */
- sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
/* PTD10 ->RPIO[89] */
miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
gpio-controller;
#gpio-cells = <2>;
/* PTB18 -> RGPIO[40] */
- load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
spi-max-frequency = <100000>;
};
};
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_switch>;
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "eth_cu_1000_1";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_2";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_fc_1000_1";
phy-mode = "1000base-x";
sfp = <&sff>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
phy-mode = "rmii";
ethernet = <&fec1>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
- sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
- &gpio1 8 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+ &gpio1 8 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
flash@0 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "aib2main_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "aib2main_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_5";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_6";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_4";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_7";
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "modem_pic";
};
};
- switch0port10: port@10 {
+ switch0port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
#address-cells = <1>;
#size-cells = <0>;
- switch1: switch1@0 {
+ switch1: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 1>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_100_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_100_3";
};
- switch1port9: port@9 {
+ switch1port9: ethernet-port@9 {
reg = <9>;
label = "dsa";
phy-mode = "xgmii";
};
};
- switch1port10: port@10 {
+ switch1port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
#address-cells = <1>;
#size-cells = <0>;
- switch2: switch2@0 {
+ switch2: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 2>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_fc_1000_2";
phy-mode = "1000base-x";
sfp = <&sff1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_fc_1000_3";
phy-mode = "1000base-x";
sfp = <&sff2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_fc_1000_4";
phy-mode = "1000base-x";
sfp = <&sff3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_fc_1000_5";
phy-mode = "1000base-x";
sfp = <&sff4>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_fc_1000_6";
phy-mode = "1000base-x";
sfp = <&sff5>;
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "eth_fc_1000_7";
phy-mode = "1000base-x";
sfp = <&sff6>;
};
- port@9 {
+ ethernet-port@9 {
reg = <9>;
label = "eth_fc_1000_1";
phy-mode = "1000base-x";
sfp = <&sff0>;
};
- switch2port10: port@10 {
+ switch2port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "2500base-x";
#address-cells = <1>;
#size-cells = <0>;
- switch3: switch3@0 {
+ switch3: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
reg = <0>;
dsa,member = <0 3>;
eeprom-length = <65536>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_fc_1000_8";
phy-mode = "1000base-x";
sfp = <&sff7>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_fc_1000_9";
phy-mode = "1000base-x";
sfp = <&sff8>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_fc_1000_10";
phy-mode = "1000base-x";
sfp = <&sff9>;
};
- switch3port9: port@9 {
+ switch3port9: ethernet-port@9 {
reg = <9>;
label = "dsa";
phy-mode = "2500base-x";
};
};
- switch3port10: port@10 {
+ switch3port10: ethernet-port@10 {
reg = <10>;
label = "dsa";
phy-mode = "xgmii";
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_3";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_4";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_5";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_6";
};
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_100_3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_4";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_5";
};
- port@8 {
+ ethernet-port@8 {
reg = <8>;
label = "eth_cu_1000_1";
};
- port@9 {
+ ethernet-port@9 {
reg = <9>;
label = "eth_cu_1000_2";
phy-handle = <&phy9>;
};
};
- mdio1 {
+ mdio-external {
compatible = "marvell,mv88e6xxx-mdio-external";
#address-cells = <1>;
#size-cells = <0>;
- phy9: phy9@0 {
+ phy9: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
pinctrl-0 = <&pinctrl_gpio_phy9>;
pinctrl-names = "default";
suppress-preamble;
status = "okay";
- switch0: switch0@0 {
+ switch0: ethernet-switch@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
pinctrl-names = "default";
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
phy-mode = "rmii";
ethernet = <&fec1>;
};
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "eth_cu_1000_1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "eth_cu_1000_2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "eth_cu_1000_3";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "eth_cu_1000_4";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "eth_cu_1000_5";
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "eth_cu_1000_6";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+ pm8018: pmic {
+ compatible = "qcom,pm8018", "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8018-pwrkey",
+ "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8018_mpps: mpps@50 {
+ compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8018_mpps 0 0 6>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+
+ pm8018_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8018_gpio 0 0 6>;
+ #gpio-cells = <2>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8058: pmic {
+ compatible = "qcom,pm8058";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+
+ pm8058_mpps: mpps@50 {
+ compatible = "qcom,pm8058-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8058_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
+ };
+
+ pm8058_keypad: keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
+ pm8058_xoadc: xoadc@197 {
+ compatible = "qcom,pm8058-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ ichg: adc-channel@3 {
+ reg = <0x00 0x03>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ ref_325mv: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+
+ rtc@1e8 {
+ compatible = "qcom,pm8058-rtc";
+ reg = <0x1e8>;
+ interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ };
+};
"usb-valid",
"dc-valid";
+ status = "disabled";
+
chg_otg: otg-vbus { };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+ pm8821: pmic {
+ compatible = "qcom,pm8821";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8821_mpps 0 0 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8921: pmic {
+ compatible = "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8921_mpps: mpps@50 {
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8921_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ reg = <0x11d>;
+ interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+ allow-set-time;
+ };
+
+ pm8921_keypad: keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+ <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ status = "disabled";
+ };
+
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8921_xoadc: xoadc@197 {
+ compatible = "qcom,pm8921-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ batt_therm: adc-channel@8 {
+ reg = <0x00 0x08>;
+ };
+
+ batt_id: adc-channel@9 {
+ reg = <0x00 0x09>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ chg_temp: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+ <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+ };
+};
usb-otg-in-supply = <&pm8941_5vs1>;
+ status = "disabled";
+
chg_otg: otg-vbus { };
};
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
qcom,fast-charge-high-threshold-voltage = <4400000>;
qcom,auto-recharge-threshold-voltage = <4300000>;
qcom,minimum-input-voltage = <4400000>;
+
+ status = "okay";
};
&tlmm {
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
#include <dt-bindings/input/ti-drv260x.h>
/delete-node/ &adsp_region;
qcom,fast-charge-current-limit = <300000>;
qcom,fast-charge-safe-current = <600000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
+
+ status = "okay";
};
&tlmm {
/dts-v1/;
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4450000>;
+
+ status = "okay";
};
&tlmm {
#include <dt-bindings/input/input.h>
#include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
/delete-node/ &adsp_region;
/delete-node/ &smem_region;
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm APQ8060 Dragonboard";
/* Trig on both edges - getting close or far away */
interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
/* MPP05 analog input to the XOADC */
- io-channels = <&xoadc 0x00 0x05>;
+ io-channels = <&pm8058_xoadc 0x00 0x05>;
io-channel-names = "aout";
pinctrl-names = "default";
pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
};
};
+&pm8058 {
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8058_gpio {
dragon_ethernet_gpios: ethernet-state {
pinconf {
* that means
*/
regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+
vdd_l0-supply = <&pm8901_s4>;
vdd_l1-supply = <&vph>;
vdd_l2-supply = <&vph>;
lvs3_in-supply = <&pm8058_s2>;
mvs_in-supply = <&pm8058_s3>;
- l0 {
+ pm8901_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8901_l1: l1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l2 {
+
+ pm8901_l2: l2 {
/* TMA340 requires strictly 3.3V */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l3 {
+
+ pm8901_l3: l3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+
+ pm8901_l4: l4 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l5 {
+
+ pm8901_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8901_l6: l6 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
/* s0 and s1 are SAW regulators controlled over SPM */
- s2 {
+ pm8901_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8901_s3: s3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s4 {
+ pm8901_s4: s4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <1600000>;
};
/* LVS0 thru 3 and mvs are just switches */
- lvs0 {
+ pm8901_lvs0: lvs0 {
regulator-always-on;
};
- lvs1 { };
- lvs2 { };
- lvs3 { };
- mvs { };
+ pm8901_lvs1: lvs1 { };
+
+ pm8901_lvs2: lvs2 { };
+
+ pm8901_lvs3: lvs3 { };
+
+ pm8901_mvs: mvs { };
};
regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
+
vdd_l0_l1_lvs-supply = <&pm8058_s3>;
vdd_l2_l11_l12-supply = <&vph>;
vdd_l3_l4_l5-supply = <&vph>;
vdd_s4-supply = <&vph>;
vdd_ncp-supply = <&vph>;
- l0 {
+ pm8058_l0: l0 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l1 {
+
+ pm8058_l1: l1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l2 {
+
+ pm8058_l2: l2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l3 {
+
+ pm8058_l3: l3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l4 {
+
+ pm8058_l4: l4 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l5 {
+
+ pm8058_l5: l5 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l6 {
+
+ pm8058_l6: l6 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
bias-pull-down;
};
- l7 {
+
+ pm8058_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l8 {
+
+ pm8058_l8: l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3050000>;
bias-pull-down;
};
- l9 {
+
+ pm8058_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l10 {
+
+ pm8058_l10: l10 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l11 {
+
+ pm8058_l11: l11 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
bias-pull-down;
};
- l12 {
+
+ pm8058_l12: l12 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l13 {
+
+ pm8058_l13: l13 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
bias-pull-down;
};
- l14 {
+
+ pm8058_l14: l14 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- l15 {
+
+ pm8058_l15: l15 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
bias-pull-down;
};
- l16 {
+
+ pm8058_l16: l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
regulator-always-on;
};
- l17 {
+
+ pm8058_l17: l17 {
// 1.5V according to schematic
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l18 {
+
+ pm8058_l18: l18 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
bias-pull-down;
};
- l19 {
+
+ pm8058_l19: l19 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
bias-pull-down;
};
- l20 {
+
+ pm8058_l20: l20 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l21 {
+
+ pm8058_l21: l21 {
// 1.1 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
regulator-always-on;
};
- l22 {
+
+ pm8058_l22: l22 {
// 1.2 V according to schematic
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l23 {
+
+ pm8058_l23: l23 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l24 {
+
+ pm8058_l24: l24 {
// Unused
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l25 {
+
+ pm8058_l25: l25 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- s0 {
+ pm8058_s0: s0 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1325000>;
regulator-min-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s1 {
+
+ pm8058_s1: s1 {
// regulator-min-microvolt = <500000>;
// regulator-max-microvolt = <1250000>;
regulator-min-microvolt = <1100000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s2 {
+
+ pm8058_s2: s2 {
// 1.3 V according to schematic
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+
+ pm8058_s3: s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
regulator-always-on;
bias-pull-down;
};
- s4 {
+
+ pm8058_s4: s4 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* LVS0 and LVS1 are just switches */
- lvs0 {
+ pm8058_lvs0: lvs0 {
bias-pull-down;
};
- lvs1 {
+
+ pm8058_lvs1: lvs1 {
bias-pull-down;
};
- ncp {
+ pm8058_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
-&xoadc {
+&pm8058_xoadc {
/* Reference voltage 2.2 V */
xoadc-ref-supply = <&pm8058_l18>;
/* Board-specific channels */
- mpp5@5 {
+ adc-channel@5 {
/* Connected to AOUT of ALS sensor */
reg = <0x00 0x05>;
};
- mpp6@6 {
+
+ adc-channel@6 {
/* Connected to test point TP43 */
reg = <0x00 0x06>;
};
- mpp7@7 {
+
+ adc-channel@7 {
/* Connected to battery thermistor */
reg = <0x00 0x07>;
};
- mpp8@8 {
+
+ adc-channel@8 {
/* Connected to battery ID detector */
reg = <0x00 0x08>;
};
- mpp9@9 {
+
+ adc-channel@9 {
/* Connected to XO thermistor */
reg = <0x00 0x09>;
};
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Asus Nexus7(flo)";
compatible = "asus,nexus7-flo", "qcom,apq8064";
status = "okay";
};
-/* eMMC */
-&sdcc1 {
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- status = "okay";
-};
-
&mdp_dsi1_out {
remote-endpoint = <&dsi0_in>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
-
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vin_lvs2-supply = <&pm8921_s1>;
vdd_ncp-supply = <&pm8921_l6>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
/* msm otg HSUSB_VDDCX */
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
* tabla2x-slim-CDC_VDD_CP
* tabla2x-slim-VDDIO_CDC
*/
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
/* mipi_dsi.1-dsi1_pll_vdda */
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
/* msm_otg-HSUSB_3p3 */
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
/* msm_otg-HSUSB_1p8 */
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
/* msm_sdcc.1-sdc_vdd */
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-always-on;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
+ pm8921_l8: l8 {
+ };
+
/* mipi_dsi.1-dsi1_avdd */
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
/* pwm_power for backlight */
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
/* camera, qdsp6 */
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
* tabla2x-slim-CDC_VDDA_A_1P2V
* tabla2x-slim-VDDD_CDC_D
*/
- l25 {
+ pm8921_l25: l25 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
/*
* mipi_dsi.1-dsi1_vddio
* pil_riva-pll_vdd
*/
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
};
};
+/* eMMC */
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ status = "okay";
+};
+
&usb_hs1_phy {
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
-
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
-
};
};
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
wlan_default_gpios: wlan-gpios-state {
pinconf {
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
-
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- s4 {
+ pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- lvs1 {
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs6 {
+ pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
};
// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
status = "okay";
};
+&pm8821 {
+ interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+ interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_gpio {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
&riva {
pinctrl-names = "default";
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
status = "okay";
+
+ iris {
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
};
&rpm {
regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs_1_3_6-supply = <&pm8921_s4>;
vin_lvs_4_5_7-supply = <&pm8921_s4>;
vin_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
- s1 {
+ pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
};
- s2 {
+ pm8921_s2: s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
- s3 {
+ pm8921_s3: s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
- s4 {
+ pm8921_s4: s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
- s7 {
+ pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- s8 {
+ pm8921_s8: s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* PMOS LDO */
- l1 {
+ pm8921_l1: l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
- l2 {
+ pm8921_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l3 {
+ pm8921_l3: l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
- l4 {
+ pm8921_l4: l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l5 {
+ pm8921_l5: l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l6 {
+ pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l7 {
+ pm8921_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l8 {
+ pm8921_l8: l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l9 {
+ pm8921_l9: l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l10 {
+ pm8921_l10: l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
- l11 {
+ pm8921_l11: l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- l12 {
+ pm8921_l12: l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l14 {
+ pm8921_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l15 {
+ pm8921_l15: l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- l16 {
+ pm8921_l16: l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
- l17 {
+ pm8921_l17: l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
- l18 {
+ pm8921_l18: l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
- l21 {
+ pm8921_l21: l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l22 {
+ pm8921_l22: l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
- l23 {
+ pm8921_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- l24 {
+ pm8921_l24: l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
- l25 {
+ pm8921_l25: l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
- l27 {
+ pm8921_l27: l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- l28 {
+ pm8921_l28: l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
- l29 {
+ pm8921_l29: l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
- lvs1 {
+ pm8921_lvs1: lvs1 {
bias-pull-down;
};
- lvs2 {
+ pm8921_lvs2: lvs2 {
bias-pull-down;
};
- lvs3 {
+ pm8921_lvs3: lvs3 {
bias-pull-down;
};
- lvs4 {
+ pm8921_lvs4: lvs4 {
bias-pull-down;
};
- lvs5 {
+ pm8921_lvs5: lvs5 {
bias-pull-down;
};
- lvs6 {
+ pm8921_lvs6: lvs6 {
bias-pull-down;
};
- lvs7 {
+ pm8921_lvs7: lvs7 {
bias-pull-down;
};
- usb-switch {};
+ pm8921_usb_switch: usb-switch {};
- hdmi-switch {};
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
- ncp {
+ pm8921_ncp: ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
-
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Charger temperature */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
clock-names = "core";
};
- ssbi@c00000 {
+ ssbi2: ssbi@c00000 {
compatible = "qcom,ssbi";
reg = <0x00c00000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8821: pmic {
- compatible = "qcom,pm8821";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8821_mpps: mpps@50 {
- compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
- reg = <0x50>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8821_mpps 0 0 4>;
- };
- };
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pmicintc: pmic {
- compatible = "qcom,pm8921";
- interrupt-parent = <&tlmm_pinmux>;
- interrupts = <74 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8921_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
- interrupts = <39 1>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- xoadc: xoadc@197 {
- compatible = "qcom,pm8921-adc";
- reg = <197>;
- interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- batt_therm: adc-channel@8 {
- reg = <0x00 0x08>;
- };
- batt_id: adc-channel@9 {
- reg = <0x00 0x09>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- chg_temp: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
- };
};
qfprom: qfprom@700000 {
clocks = <&pxo_board>, <&cxo_board>;
clock-names = "pxo", "cxo";
};
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
-
- pm8921_s1: s1 {};
- pm8921_s2: s2 {};
- pm8921_s3: s3 {};
- pm8921_s4: s4 {};
- pm8921_s7: s7 {};
- pm8921_s8: s8 {};
-
- pm8921_l1: l1 {};
- pm8921_l2: l2 {};
- pm8921_l3: l3 {};
- pm8921_l4: l4 {};
- pm8921_l5: l5 {};
- pm8921_l6: l6 {};
- pm8921_l7: l7 {};
- pm8921_l8: l8 {};
- pm8921_l9: l9 {};
- pm8921_l10: l10 {};
- pm8921_l11: l11 {};
- pm8921_l12: l12 {};
- pm8921_l14: l14 {};
- pm8921_l15: l15 {};
- pm8921_l16: l16 {};
- pm8921_l17: l17 {};
- pm8921_l18: l18 {};
- pm8921_l21: l21 {};
- pm8921_l22: l22 {};
- pm8921_l23: l23 {};
- pm8921_l24: l24 {};
- pm8921_l25: l25 {};
- pm8921_l26: l26 {};
- pm8921_l27: l27 {};
- pm8921_l28: l28 {};
- pm8921_l29: l29 {};
-
- pm8921_lvs1: lvs1 {};
- pm8921_lvs2: lvs2 {};
- pm8921_lvs3: lvs3 {};
- pm8921_lvs4: lvs4 {};
- pm8921_lvs5: lvs5 {};
- pm8921_lvs6: lvs6 {};
- pm8921_lvs7: lvs7 {};
-
- pm8921_usb_switch: usb-switch {};
-
- pm8921_hdmi_switch: hdmi-switch {
- bias-pull-down;
- };
-
- pm8921_ncp: ncp {};
- };
};
usb1: usb@12500000 {
qcom,ncb = <3>;
};
- pcie: pci@1b500000 {
+ pcie: pcie@1b500000 {
compatible = "qcom,pcie-apq8064";
reg = <0x1b500000 0x1000>,
<0x1b502000 0x80>,
memory-region = <&wcnss_mem>;
- vddcx-supply = <&pm8921_s3>;
- vddmx-supply = <&pm8921_l24>;
- vddpx-supply = <&pm8921_s4>;
-
status = "disabled";
iris {
clocks = <&cxo_board>;
clock-names = "xo";
-
- vddxo-supply = <&pm8921_l4>;
- vddrfa-supply = <&pm8921_s2>;
- vddpa-supply = <&pm8921_l10>;
- vdddig-supply = <&pm8921_lvs2>;
};
smd-edge {
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
/delete-node/ &mpss_region;
no-map;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_uart2 {
pinctrl-1 = <&sdc2_off>;
};
+&smbb {
+ status = "okay";
+};
+
&tlmm {
sdc1_on: sdc1-on-state {
clk-pins {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
/ {
model = "Qualcomm APQ8084/IFC6540";
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
/ {
model = "Qualcomm APQ 8084-MTP";
};
};
- pci@40000000 {
+ pcie@40000000 {
status = "okay";
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
};
sdhci: mmc@7824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x4ab000 0x4>;
};
- pcie0: pci@40000000 {
+ pcie0: pcie@40000000 {
compatible = "qcom,pcie-ipq4019";
reg = <0x40000000 0xf1d>,
<0x40000f20 0xa8>,
};
};
- qcom,ssbi@500000 {
+ ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
status = "disabled";
};
- pcie0: pci@1b500000 {
+ pcie0: pcie@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
0x1b502000 0x80
perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
};
- pcie1: pci@1b700000 {
+ pcie1: pcie@1b700000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b700000 0x1000
0x1b702000 0x80
perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
};
- pcie2: pci@1b900000 {
+ pcie2: pcie@1b900000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b900000 0x1000
0x1b902000 0x80
* Author : Neil Armstrong <narmstrong@baylibre.com>
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
/ {
model = "MangOH Green with WP8548 Module";
*/
#include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
/ {
model = "Sierra Wireless WP8548 Module";
};
};
-&pmicgpio {
+&pm8018 {
+ interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
pinctrl-names = "default";
};
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8018-regulators";
+
+ vin_lvs1-supply = <&pm8018_s3>;
+
+ vdd_l7-supply = <&pm8018_s4>;
+ vdd_l8-supply = <&pm8018_s3>;
+ vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+ /* Buck SMPS */
+ pm8018_s1: s1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s2: s2 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s3: s3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s4: s4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s5: s5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8018_l2: l2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l3: l3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l4: l4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8018_l5: l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8018_l8: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8018_l9: l9 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8018_l10: l10 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l11: l11 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l13: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8018_l14: l14 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8018_lvs1: lvs1 {
+ bias-pull-down;
+ };
+ };
+};
+
&sdcc1 {
status = "okay";
};
};
};
- qcom,ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pmicintc: pmic {
- compatible = "qcom,pm8018", "qcom,pm8921";
- interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- pmicmpp: mpps@50 {
- compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pmicmpp 0 0 6>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
-
- pmicgpio: gpio@150 {
- compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pmicgpio 0 0 6>;
- #gpio-cells = <2>;
- };
- };
};
sdcc1bam: dma-controller@12182000 {
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8018-regulators";
-
- vin_lvs1-supply = <&pm8018_s3>;
-
- vdd_l7-supply = <&pm8018_s4>;
- vdd_l8-supply = <&pm8018_s3>;
- vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
- /* Buck SMPS */
- pm8018_s1: s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1150000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s2: s2 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s3: s3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s4: s4 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2200000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- pm8018_s5: s5 {
- regulator-always-on;
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
- };
-
- /* PMOS LDO */
- pm8018_l2: l2 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l3: l3 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- pm8018_l4: l4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- pm8018_l5: l5 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- pm8018_l7: l7 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- pm8018_l8: l8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- bias-pull-down;
- };
-
- pm8018_l9: l9 {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1150000>;
- bias-pull-down;
- };
-
- pm8018_l10: l10 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l11: l11 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l12: l12 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- bias-pull-down;
- };
-
- pm8018_l13: l13 {
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- pm8018_l14: l14 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- bias-pull-down;
- };
-
- /* Low Voltage Switch */
- pm8018_lvs1: lvs1 {
- bias-pull-down;
- };
- };
};
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* microSD */
+ display0 = &framebuffer;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ stdout-path = "display0";
+
+ framebuffer: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x3200000 0x800000>;
+ format = "a8r8g8b8";
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 4)>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ /*
+ * This device being a WP platform has a different
+ * memory layout than other Android based devices.
+ * This smem memory region is directly copied from
+ * the original UEFI firmware.
+ */
+ reserved-memory {
+ display_reserved: framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ /* These values were taken from the original firmware DSDT */
+ pm8226_s1: s1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio106", "gpio107", "gpio108";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ irq-pins {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ reset-pins {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Microsoft Lumia 640";
+ compatible = "microsoft,dempsey", "qcom,msm8226";
+ chassis-type = "handset";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Microsoft Lumia 640 XL";
+ compatible = "microsoft,makepeace", "qcom,msm8226";
+ chassis-type = "handset";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+ model = "Nokia Lumia 630";
+ compatible = "microsoft,moneypenny", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&framebuffer {
+ width = <480>;
+ height = <854>;
+ stride = <(480 * 4)>;
+};
<&gcc GPLL0_VOTE>,
<&gcc GPLL1_VOTE>,
<&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
- <0>,
- <0>;
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>;
clock-names = "xo",
"mmss_gpll0_vote",
"gpll0_vote",
offset = <0x65c>;
mode-bootloader = <0x77665500>;
- mode-normal = <0x77665501>;
- mode-recovery = <0x77665502>;
+ mode-normal = <0x77665501>;
+ mode-recovery = <0x77665502>;
};
};
"ref";
};
};
+
+ gpu: adreno@fdb00000 {
+ compatible = "qcom,adreno-305.18", "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ clock-names = "core", "iface", "mem_iface";
+
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ status = "disabled";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-450000000 {
+ opp-hz = /bits/ 64 <450000000>;
+ };
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-19000000 {
+ opp-hz = /bits/ 64 <19000000>;
+ };
+ };
+ };
};
thermal-zones {
#include <dt-bindings/input/input.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
};
&pm8058 {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_FN_F1)
- MATRIX_KEY(0, 1, KEY_UP)
- MATRIX_KEY(0, 2, KEY_LEFT)
- MATRIX_KEY(0, 3, KEY_VOLUMEUP)
- MATRIX_KEY(1, 0, KEY_FN_F2)
- MATRIX_KEY(1, 1, KEY_RIGHT)
- MATRIX_KEY(1, 2, KEY_DOWN)
- MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
- MATRIX_KEY(2, 3, KEY_ENTER)
- MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
- MATRIX_KEY(4, 1, KEY_UP)
- MATRIX_KEY(4, 2, KEY_LEFT)
- MATRIX_KEY(4, 3, KEY_HOME)
- MATRIX_KEY(4, 4, KEY_FN_F3)
- MATRIX_KEY(5, 0, KEY_CAMERA)
- MATRIX_KEY(5, 1, KEY_RIGHT)
- MATRIX_KEY(5, 2, KEY_DOWN)
- MATRIX_KEY(5, 3, KEY_BACK)
- MATRIX_KEY(5, 4, KEY_MENU)
- >;
- keypad,num-rows = <6>;
- keypad,num-columns = <5>;
+ interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_FN_F1)
+ MATRIX_KEY(0, 1, KEY_UP)
+ MATRIX_KEY(0, 2, KEY_LEFT)
+ MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(1, 0, KEY_FN_F2)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+ MATRIX_KEY(2, 3, KEY_ENTER)
+ MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(4, 1, KEY_UP)
+ MATRIX_KEY(4, 2, KEY_LEFT)
+ MATRIX_KEY(4, 3, KEY_HOME)
+ MATRIX_KEY(4, 4, KEY_FN_F3)
+ MATRIX_KEY(5, 0, KEY_CAMERA)
+ MATRIX_KEY(5, 1, KEY_RIGHT)
+ MATRIX_KEY(5, 2, KEY_DOWN)
+ MATRIX_KEY(5, 3, KEY_BACK)
+ MATRIX_KEY(5, 4, KEY_MENU)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
+};
+
+&rpm {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8901-regulators";
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8058-regulators";
};
};
};
};
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&xoadc 0x00 0x01>, /* Battery */
- <&xoadc 0x00 0x02>, /* DC in (charger) */
- <&xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&xoadc 0x00 0x0b>, /* Die temperature */
- <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8058: pmic {
- compatible = "qcom,pm8058";
- interrupt-parent = <&tlmm>;
- interrupts = <88 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8058_mpps: mpps@50 {
- compatible = "qcom,pm8058-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8058_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8058_keypad: keypad@148 {
- compatible = "qcom,pm8058-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- xoadc: xoadc@197 {
- compatible = "qcom,pm8058-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- ichg: adc-channel@3 {
- reg = <0x00 0x03>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- ref_325mv: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
-
- rtc@1e8 {
- compatible = "qcom,pm8058-rtc";
- reg = <0x1e8>;
- interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
- allow-set-time;
- };
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
-
- };
};
l2cc: clock-controller@2082000 {
clocks = <&pxo_board>;
clock-names = "pxo";
};
-
- regulators-0 {
- compatible = "qcom,rpm-pm8901-regulators";
-
- pm8901_l0: l0 {};
- pm8901_l1: l1 {};
- pm8901_l2: l2 {};
- pm8901_l3: l3 {};
- pm8901_l4: l4 {};
- pm8901_l5: l5 {};
- pm8901_l6: l6 {};
-
- /* S0 and S1 Handled as SAW regulators by SPM */
- pm8901_s2: s2 {};
- pm8901_s3: s3 {};
- pm8901_s4: s4 {};
-
- pm8901_lvs0: lvs0 {};
- pm8901_lvs1: lvs1 {};
- pm8901_lvs2: lvs2 {};
- pm8901_lvs3: lvs3 {};
-
- pm8901_mvs: mvs {};
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pm8058-regulators";
-
- pm8058_l0: l0 {};
- pm8058_l1: l1 {};
- pm8058_l2: l2 {};
- pm8058_l3: l3 {};
- pm8058_l4: l4 {};
- pm8058_l5: l5 {};
- pm8058_l6: l6 {};
- pm8058_l7: l7 {};
- pm8058_l8: l8 {};
- pm8058_l9: l9 {};
- pm8058_l10: l10 {};
- pm8058_l11: l11 {};
- pm8058_l12: l12 {};
- pm8058_l13: l13 {};
- pm8058_l14: l14 {};
- pm8058_l15: l15 {};
- pm8058_l16: l16 {};
- pm8058_l17: l17 {};
- pm8058_l18: l18 {};
- pm8058_l19: l19 {};
- pm8058_l20: l20 {};
- pm8058_l21: l21 {};
- pm8058_l22: l22 {};
- pm8058_l23: l23 {};
- pm8058_l24: l24 {};
- pm8058_l25: l25 {};
-
- pm8058_s0: s0 {};
- pm8058_s1: s1 {};
- pm8058_s2: s2 {};
- pm8058_s3: s3 {};
- pm8058_s4: s4 {};
-
- pm8058_lvs0: lvs0 {};
- pm8058_lvs1: lvs1 {};
-
- pm8058_ncp: ncp {};
- };
};
amba {
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+ model = "HTC One Mini 2";
+ compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ unknown@5b00000 {
+ reg = <0x05b00000 0x200000>;
+ no-map;
+ };
+
+ unknown@7500000 {
+ reg = <0x07500000 0xb00000>;
+ no-map;
+ };
+
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x4f00000>;
+ no-map;
+ };
+
+ unknown@cf00000 {
+ reg = <0x0cf00000 0x200000>;
+ no-map;
+ };
+
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x3a000>;
+ no-map;
+ };
+
+ unknown@d13a000 {
+ reg = <0x0d13a000 0xc6000>;
+ no-map;
+ };
+
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0x650000>;
+ no-map;
+ };
+
+ unknown@d850000 {
+ reg = <0x0d850000 0x3b0000>;
+ no-map;
+ };
+
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1400000>;
+ no-map;
+ };
+
+ unknown@f000000 {
+ reg = <0x0f000000 0x500000>;
+ no-map;
+ };
+
+ venus_region: venus@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ unknown@fb00000 {
+ reg = <0x0fb00000 0x1b00000>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/msm8926/memul/adsp.mbn";
+ status = "okay";
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0d>;
+ interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vid-supply = <&pm8226_l28>;
+ };
+
+ accelerometer@18 {
+ compatible = "bosch,bma250e";
+ reg = <0x18>;
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vddio-supply = <&pm8226_l28>;
+ };
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ /* TFA9887 @ 34 */
+ /* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l19>;
+
+ syna,startup-delay-ms = <160>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ /* NCP6924 Camera Regulators @ 10 */
+ /* PN544 NFC @ 28 */
+ /* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1750000>;
+ qcom,fast-charge-current-limit = <1750000>;
+ qcom,fast-charge-safe-voltage = <4360000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Nokia Lumia 735";
+ compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "disabled";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Nokia Lumia 830";
+ compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+ status = "okay";
+
+ touchscreen: touchscreen@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l15>;
+ vio-supply = <&pm8226_l6>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c5 {
+ status = "disabled";
+};
+
+&gpio_keys {
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key-camera-focus {
+ label = "Camera Focus";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G 4G (2013)";
+ compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ /* Pull-up for I2C lines */
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
#include <dt-bindings/input/input.h>
#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
};
};
-&pmicintc {
- keypad@148 {
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_VOLUMEUP)
- MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
- MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
- MATRIX_KEY(0, 3, KEY_CAMERA)
- >;
- keypad,num-rows = <1>;
- keypad,num-columns = <5>;
- };
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
+
+ status = "okay";
};
&rpm {
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
/ {
model = "Samsung Galaxy Express SGH-I437";
};
};
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
compatible = "qcom,rpm-pm8921-regulators";
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
- };
};
acc0: clock-controller@2088000 {
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pmicintc: pmic {
- compatible = "qcom,pm8921";
- interrupt-parent = <&msmgpio>;
- interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- keypad@148 {
- compatible = "qcom,pm8921-keypad";
- reg = <0x148>;
- interrupt-parent = <&pmicintc>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
- };
};
rng@1a500000 {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
pmsg-size = <0x80000>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
};
&tlmm {
reg = <0xf9011000 0x1000>;
};
+ saw_l2: power-controller@f9012000 {
+ compatible = "qcom,saw2";
+ reg = <0xf9012000 0x1000>;
+ regulator;
+ };
+
+ watchdog@f9017000 {
+ compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+ reg = <0xf9017000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sleep_clk>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
};
};
- saw0: power-controller@f9089000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw1: power-controller@f9099000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw2: power-controller@f90a9000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw3: power-controller@f90b9000 {
- compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
- reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
- };
-
- saw_l2: power-controller@f9012000 {
- compatible = "qcom,saw2";
- reg = <0xf9012000 0x1000>;
- regulator;
- };
-
acc0: power-manager@f9088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
};
+ saw0: power-controller@f9089000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc1: power-manager@f9098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
};
+ saw1: power-controller@f9099000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc2: power-manager@f90a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
};
+ saw2: power-controller@f90a9000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+ };
+
acc3: power-manager@f90b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
+ saw3: power-controller@f90b9000 {
+ compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+ reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+ };
+
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
};
};
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
};
};
- bimc: interconnect@fc380000 {
- reg = <0xfc380000 0x6a000>;
- compatible = "qcom,msm8974-bimc";
- #interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
- };
-
snoc: interconnect@fc460000 {
reg = <0xfc460000 0x4000>;
compatible = "qcom,msm8974-snoc";
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
pnoc: interconnect@fc468000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
};
ocmemnoc: interconnect@fc470000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
- <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
};
mmssnoc: interconnect@fc478000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&mmcc MMSS_S0_AXI_CLK>,
- <&mmcc MMSS_S0_AXI_CLK>;
+ <&mmcc MMSS_S0_AXI_CLK>;
};
cnoc: interconnect@fc480000 {
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
tsens: thermal-sensor@fc4a9000 {
bias-pull-up;
drive-strength = <2>;
};
-
- cd-pins {
- pins = "gpio54";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- };
};
blsp1_uart2_default: blsp1-uart2-default-state {
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4450000>;
+
+ status = "okay";
};
&tlmm {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
debounce-interval = <150>;
};
};
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c1 {
status = "okay";
};
+&smbb {
+ status = "okay";
+};
+
&tlmm {
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio68";
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/leds/common.h>
enable-active-high;
};
- /delete-node/ vreg-boost;
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
&blsp1_i2c2 {
vddr-supply = <&vreg_panel>;
reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
- te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
};
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
+
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
+ status = "okay";
};
&remoteproc_mss {
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
+ status = "okay";
};
&rpm_requests {
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
};
&tlmm {
#include "qcom-sdx55.dtsi"
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SDX55 MTP";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Thundercomm T55 Development Kit";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
/ {
model = "Telit FN980 TLB";
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx55-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00ff6000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
-
- resets = <&gcc GCC_USB3PHY_PHY_BCR>,
- <&gcc GCC_USB3_PHY_BCR>;
- reset-names = "phy", "common";
-
- usb_ssphy: phy@ff6200 {
- reg = <0x00ff6200 0x170>,
- <0x00ff6400 0x200>,
- <0x00ff6800 0x800>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ status = "disabled";
};
mc_virt: interconnect@1100000 {
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,
status = "disabled";
};
- pcie_phy: phy@1c07000 {
+ pcie_phy: phy@1c06000 {
compatible = "qcom,sdx55-qmp-pcie-phy";
- reg = <0x01c07000 0x2000>;
+ reg = <0x01c06000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
compatible = "qcom,sdx55-pdc", "qcom,pdc";
reg = <0x0b210000 0x30000>;
qcom,pdc-ranges = <0 179 52>;
- #interrupt-cells = <3>;
+ #interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <arm64/qcom/pmk8350.dtsi>
#include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SDX65 MTP";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdx65";
reg = <0x00100000 0x001f7400>;
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
- clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <&pcie_phy>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "sleep_clk",
+ "pcie_pipe_clk",
+ "usb3_phy_wrapper_gcc_usb30_pipe_clk";
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
- reg = <0x00ff6000 0x1c8>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00ff6000 0x2000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_EN>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_BCR>,
- <&gcc GCC_USB3_PHY_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
status = "disabled";
- usb_ssphy: phy@ff6200 {
- reg = <0x00ff6e00 0x160>,
- <0x00ff7000 0x1ec>,
- <0x00ff6200 0x1e00>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
};
system_noc: interconnect@1620000 {
power-domains = <&gcc PCIE_GDSC>;
phys = <&pcie_phy>;
- phy-names = "pcie-phy";
+ phy-names = "pciephy";
max-link-speed = <3>;
num-lanes = <2>;
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_hsphy>, <&usb_ssphy>;
+ phys = <&usb_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
reg = <0x0c264000 0x1000>;
};
- spmi_bus: qcom,spmi@c440000 {
+ spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
<0xc600000 0x2000000>,
};
};
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&can1 {
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
i2c-gpio,delay-us = <5>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
};
+ panel {
+ compatible = "ampire,am-800480l1tmqw-t00h";
+ backlight = <&backlight>;
+ power-supply = <®_5p0v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc0_rgb>;
+ };
+ };
+ };
+
sound {
compatible = "simple-audio-card";
};
};
-&pfc {
+&lcdc0 {
pinctrl-0 = <&lcd0_pins>;
pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pfc {
ether_pins: ether {
groups = "gether_mii", "gether_int";
function = "gether";
status = "disabled";
};
+ lcdc0: lcd-controller@fe940000 {
+ compatible = "renesas,r8a7740-lcdc";
+ reg = <0xfe940000 0x4000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+ <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+ <&vou_clk>;
+ clock-names = "fck", "media", "lclk", "video";
+ power-domains = <&pd_a4lc>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcdc0_rgb: endpoint {
+ };
+ };
+ };
+ };
+
+ lcdc1: lcd-controller@fe944000 {
+ compatible = "renesas,r8a7740-lcdc";
+ reg = <0xfe944000 0x4000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+ <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+ <&vou_clk>;
+ clock-names = "fck", "media", "lclk", "video";
+ power-domains = <&pd_a4lc>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcdc1_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcdc1_hdmi: endpoint {
+ };
+ };
+ };
+ };
+
tmu0: timer@fff80000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff80000 0x2c>;
#clock-cells = <0>;
clock-frequency = <0>;
};
+ lcdlclk0_clk: lcdlclk0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ lcdlclk1_clk: lcdlclk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
};
};
};
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&du {
clock-names = "cec";
pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
VDDIO-supply = <®_3p3v>;
};
- stmpe811@44 {
+ port-expander@44 {
compatible = "st,stmpe811";
reg = <0x44>;
interrupt-parent = <&gpio4>;
/* internal ADC reference */
st,ref-sel = <0>;
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
states = <3300000 1>, <1800000 0>;
};
- keyboard-irq {
+ keypad-0 {
compatible = "gpio-keys";
- pinctrl-0 = <&keyboard_irq_pins>;
+ pinctrl-0 = <&keypad0_pins>;
pinctrl-names = "default";
interrupt-parent = <&gpio0>;
};
};
- keyboard-gpio {
+ keypad-1 {
compatible = "gpio-keys-polled";
poll-interval = <50>;
- pinctrl-0 = <&keyboard_gpio_pins>;
+ pinctrl-0 = <&keypad1_pins>;
pinctrl-names = "default";
key-3 {
};
&gpio0 {
- keyboard-irq-hog {
+ keypad0-hog {
gpio-hog;
gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
input;
};
&lbsc {
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x04000000>;
+ pinctrl-0 = <&flash_pins>;
+ pinctrl-names = "default";
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
};
};
+ flash_pins: flash {
+ groups = "lbsc_cs0";
+ function = "lbsc";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_c";
function = "scif2";
function = "hspi0";
};
- keyboard_irq_pins: keyboard-irq {
+ keypad0_pins: keypad-0 {
pins = "GP_0_17", "GP_0_18";
bias-pull-up;
};
- keyboard_gpio_pins: keyboard-gpio {
+ keypad1_pins: keypad-1 {
pins = "GP_0_19", "GP_0_20";
bias-pull-up;
};
};
};
+ fixedregulator1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
*
* IIC0/I2C0 does not appear to support fallback to GPIO.
*/
- i2cexio0: i2c-10 {
+ i2cexio0: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio0";
* This is similar to the arangement described for i2cexio0 (above)
* with a fallback to GPIO also provided.
*/
- i2cexio1: i2c-11 {
+ i2cexio1: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
* IIC2 and I2C2 may be switched using pinmux.
* A fallback to GPIO is also provided.
*/
- i2chdmi: i2c-12 {
+ i2chdmi: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
* IIC3 and I2C3 may be switched using pinmux.
* IIC3/I2C3 does not appear to support fallback to GPIO.
*/
- i2cpwr: i2c-13 {
+ i2cpwr: i2c-mux4 {
compatible = "i2c-demux-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins>;
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
};
};
+ fixedregulator1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
clocks = <&osc4_clk>;
clock-names = "cec";
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";
};
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
* I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio1: i2c-12 {
+ i2cexio1: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-exio1";
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-13 {
+ i2chdmi: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
clocks = <&cec_clock>;
clock-names = "cec";
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux3 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
reg = <2 0x00000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
watchdog {
compatible = "dlg,da9063-watchdog";
reg = <0 0x40000000 0 0x40000000>;
};
+ d1_8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
};
&lbsc {
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0x00000000 0x04000000>;
+ pinctrl-0 = <&flash_pins>;
+ pinctrl-names = "default";
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
function = "du1";
};
+ flash_pins: flash {
+ groups = "lbsc_cs0";
+ function = "lbsc";
+ };
+
keyboard_pins: keyboard {
pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
bias-pull-up;
interrupt-parent = <&irqc>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
reg = <0 0x40000000 0 0x40000000>;
};
+ d1_8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
reg-names = "main", "edid", "cec", "packet";
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
reg = <0x39>, <0x49>, <0x29>, <0x59>;
reg-names = "main", "edid", "cec", "packet";
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
};
};
+ reg_1p8v: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
/*
* A fallback to GPIO is provided for I2C2.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c2>, <&gpioi2c2>;
i2c-bus-name = "i2c-hdmi";
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-12 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-11 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
* A fallback to GPIO is provided.
*/
- i2cexio4: i2c-14 {
+ i2cexio4: i2c-mux2 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c4>, <&gpioi2c4>;
i2c-bus-name = "i2c-exio4";
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
};
};
+ d1_8v: regulator-d1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3_3v: regulator-d3-3v {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
/*
* A fallback to GPIO is provided for I2C1.
*/
- i2chdmi: i2c-10 {
+ i2chdmi: i2c-mux1 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
interrupt-parent = <&gpio5>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+ bgvdd-supply = <&d1_8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";
};
can0: can@52104000 {
- compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+ compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
reg = <0x52104000 0x800>;
reg-io-width = <4>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
model = "Rockchip RK3036 KylinBoard";
compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x20000000>;
};
+ hdmi_con: hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds: gpio-leds {
compatible = "gpio-leds";
status = "okay";
};
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
interrupt-parent = <&gic>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- rockchip,default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
dma-names = "rx-tx";
pinctrl-0 = <&hdmi_ctl>;
status = "disabled";
- hdmi_in: port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
- hdmi_in_vop: endpoint@0 {
+
+ hdmi_in: port@0 {
reg = <0>;
- remote-endpoint = <&vop_out_hdmi>;
+
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
};
};
};
/ {
compatible = "rockchip,rk3066a";
+ aliases {
+ gpio4 = &gpio4;
+ gpio6 = &gpio6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- i2c1 = &i2c1;
mmc0 = &emmc;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+ model = "Geniatech XPI-3128";
+ compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <3300000>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ dc_5v: dc-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * This is a vbus-supply, which also supplies the GL852G usb hub,
+ * thus has to be always-on
+ */
+ host_pwr_5v: host-pwr-5v-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <1500>;
+ regulator-name = "HOST_PWR_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_5v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_drv>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-power {
+ gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_led>;
+ };
+
+ led-spd {
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ /*
+ * currently not allowed to be set as per
+ * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+ * and needs to set in userspace:
+ *
+ * linux,default-trigger = "netdev";
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&spd_led>;
+ };
+ };
+
+ mcu3v3: mcu3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "MCU3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_ddr: vcc-ddr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_io: vcc-io-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_lan: vcc-lan-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_LAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: vcc-sd-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <500>;
+ regulator-name = "VCC_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_5v>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc33_hdmi: vcc33-hdmi-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC33_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcca_33>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcca_33: vcca-33-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCA_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_11: vdd-11-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd11_hdmi: vdd11-hdmi-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD11_HDMI";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vdd_11>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_arm: vdd-arm-regulator {
+ compatible = "pwm-regulator";
+ regulator-name = "VDD_ARM";
+ pwms = <&pwm1 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+ * Since there are HW blocks in PD_LOGIC (which are all driven by
+ * this supply), that either do not have a driver at all or the
+ * driver does not implement regulator support we have to make
+ * sure here that the voltage never drops below 1050 mV.
+ */
+ vdd_log: vdd-log-regulator {
+ compatible = "pwm-regulator";
+ regulator-name = "VDD_LOG";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-dutycycle-range = <30 100>;
+ pwm-supply = <&vcc_sys>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <4000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ vmmc-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates= <50000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names = /* GPIO0 A0-A7 */
+ "", "", "HEADER_5", "HEADER_3",
+ "", "", "", "",
+ /* GPIO0 B0-B7 */
+ "HEADER_22", "HEADER_23", "", "HEADER_19",
+ "HEADER_26", "HEADER_21", "HEADER_24", "",
+ /* GPIO0 C0-C7 */
+ "", "HEADER_18", "", "",
+ "", "", "", "",
+ /* GPIO0 D0-D7 */
+ "HEADER_36", "", "", "",
+ "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+ gpio-line-names = /* GPIO1 A0-A7 */
+ "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+ "HEADER_40", "HEADER_38", "", "",
+ /* GPIO1 B0-B7 */
+ "HEADER_11", "", "", "HEADER_29",
+ "HEADER_31", "", "", "",
+ /* GPIO1 C0-C7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO1 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names = /* GPIO2 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO2 C0-C7 */
+ "", "", "", "",
+ "HEADER_27", "", "", "",
+ /* GPIO2 D0-D7 */
+ "", "", "HEADER_8", "HEADER_10",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = /* GPIO3 A0-A7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO3 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO3 C0-C7 */
+ "", "HEADER_32", "", "",
+ "", "", "", "HEADER_12",
+ /* GPIO3 D0-D7 */
+ "", "", "", "HEADER_15",
+ "", "", "", "";
+};
+
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
+&mdio {
+ phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ max-speed = <100>;
+ /* T2.2.4 min. 1 us */
+ reset-assert-us = <10>;
+ /* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+ reset-deassert-us = <20>;
+ reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp83848c_rst>;
+ };
+};
+
+&pinctrl {
+ dp83848c {
+ dp83848c_rst: dp83848c-rst {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir-receiver {
+ ir_int: ir-int {
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ power_led: power-led {
+ rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ spd_led: spd-led {
+ rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_drv: host-drv {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ vmmc-supply = <&vcc_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+ disable-wp;
+ cap-sd-highspeed;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_otg {
+ vusb_a-supply = <&vcc_io>;
+ vusb_d-supply = <&vdd_11>;
+ status = "okay";
+};
+
+&usb2phy {
+ status = "okay";
+};
+
+&usb2phy_host {
+ status = "okay";
+};
+
+&usb2phy_otg {
+ status = "okay";
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
/ {
compatible = "rockchip,rk3128";
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
};
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <975000 975000 1250000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1050000 1050000 1250000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1150000 1150000 1250000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1250000 1250000 1250000>;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
};
};
+ gpu: gpu@10090000 {
+ compatible = "rockchip,rk3128-mali", "arm,mali-400";
+ reg = <0x10090000 0x10000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1";
+ clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ resets = <&cru SRST_GPU>;
+ power-domains = <&power RK3128_PD_GPU>;
+ status = "disabled";
+ };
+
pmu: syscon@100a0000 {
compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
reg = <0x100a0000 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3128-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3128_PD_VIO {
+ reg = <RK3128_PD_VIO>;
+ clocks = <&cru ACLK_CIF>,
+ <&cru HCLK_CIF>,
+ <&cru DCLK_EBC>,
+ <&cru HCLK_EBC>,
+ <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>,
+ <&cru ACLK_LCDC0>,
+ <&cru HCLK_LCDC0>,
+ <&cru PCLK_MIPI>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>,
+ <&cru ACLK_VIO0>,
+ <&cru ACLK_VIO1>,
+ <&cru HCLK_VIO>,
+ <&cru HCLK_VIO_H2P>,
+ <&cru DCLK_VOP>,
+ <&cru SCLK_VOP>;
+ pm_qos = <&qos_ebc>,
+ <&qos_iep>,
+ <&qos_lcdc>,
+ <&qos_rga>,
+ <&qos_vip>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3128_PD_VIDEO {
+ reg = <RK3128_PD_VIDEO>;
+ clocks = <&cru ACLK_VDPU>,
+ <&cru HCLK_VDPU>,
+ <&cru ACLK_VEPU>,
+ <&cru HCLK_VEPU>,
+ <&cru SCLK_HEVC_CORE>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3128_PD_GPU {
+ reg = <RK3128_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ qos_gpu: qos@1012d000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012d000 0x20>;
+ };
+
+ qos_vpu: qos@1012e000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012e000 0x20>;
+ };
+
+ qos_rga: qos@1012f000 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f000 0x20>;
+ };
+
+ qos_ebc: qos@1012f080 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f080 0x20>;
+ };
+
+ qos_iep: qos@1012f100 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f100 0x20>;
+ };
+
+ qos_lcdc: qos@1012f180 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f180 0x20>;
+ };
+
+ qos_vip: qos@1012f200 {
+ compatible = "rockchip,rk3128-qos", "syscon";
+ reg = <0x1012f200 0x20>;
};
gic: interrupt-controller@10139000 {
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
phys = <&usb2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
compatible = "generic-ehci";
reg = <0x101c0000 0x20000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
compatible = "generic-ohci";
reg = <0x101e0000 0x20000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy";
+ assigned-clocks = <&cru SCLK_USB480M>;
+ assigned-clock-parents = <&usb2phy>;
#clock-cells = <0>;
status = "disabled";
#dma-cells = <1>;
};
+ gmac: ethernet@2008c000 {
+ compatible = "rockchip,rk3128-gmac";
+ reg = <0x2008c000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ resets = <&cru SRST_GMAC>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3128-pinctrl";
rockchip,grf = <&grf>;
rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
};
+ sdmmc_det: sdmmc-det {
+ rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+ };
+
sdmmc_wp: sdmmc-wp {
rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
};
interrupt-parent = <&gic>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
aliases {
ethernet0 = &gmac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ gpio8 = &gpio8;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
aliases {
ethernet0 = &emac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
pwm4: pwm@10280000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280000 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm5: pwm@10280010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280010 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm6: pwm@10280020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280020 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm7: pwm@10280030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280030 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm0: pwm@20040000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040000 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm1: pwm@20040010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040010 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm2: pwm@20040020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040020 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pwm3: pwm@20040030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040030 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+ model = "Sonoff iHost 2G";
+ compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+ compatible = "rockchip,rv1109";
+
+ cpus {
+ /delete-node/ cpu@f02;
+ /delete-node/ cpu@f03;
+ };
+
+ arm-pmu {
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+};
phy-mode = "rgmii";
phy-supply = <&vcc_3v3>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+ pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
tx_delay = <0x2a>;
rx_delay = <0x1a>;
status = "okay";
<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
};
};
+ i2c2 {
+ /omit-if-no-ref/
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ /* i2c2_scl */
+ <0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+ /* i2c2_sda */
+ <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+ };
+ };
pwm2 {
/omit-if-no-ref/
pwm2m0_pins: pwm2m0-pins {
};
rgmii {
/omit-if-no-ref/
- rgmiim1_pins: rgmiim1-pins {
+ rgmiim1_miim: rgmiim1-miim {
rockchip,pins =
/* rgmii_mdc_m1 */
<2 RK_PC2 2 &pcfg_pull_none>,
/* rgmii_mdio_m1 */
- <2 RK_PC1 2 &pcfg_pull_none>,
- /* rgmii_rxclk_m1 */
- <2 RK_PD3 2 &pcfg_pull_none>,
+ <2 RK_PC1 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_rxer: rgmiim1-rxer {
+ rockchip,pins =
+ /* rgmii_rxer_m1 */
+ <2 RK_PC0 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_bus2: rgmiim1-bus2 {
+ rockchip,pins =
/* rgmii_rxd0_m1 */
<2 RK_PB5 2 &pcfg_pull_none>,
/* rgmii_rxd1_m1 */
<2 RK_PB6 2 &pcfg_pull_none>,
- /* rgmii_rxd2_m1 */
- <2 RK_PC7 2 &pcfg_pull_none>,
- /* rgmii_rxd3_m1 */
- <2 RK_PD0 2 &pcfg_pull_none>,
/* rgmii_rxdv_m1 */
<2 RK_PB4 2 &pcfg_pull_none>,
- /* rgmii_txclk_m1 */
- <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd0_m1 */
<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd1_m1 */
<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+ /* rgmii_txen_m1 */
+ <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_bus4: rgmiim1-bus4 {
+ rockchip,pins =
+ /* rgmii_rxclk_m1 */
+ <2 RK_PD3 2 &pcfg_pull_none>,
+ /* rgmii_rxd2_m1 */
+ <2 RK_PC7 2 &pcfg_pull_none>,
+ /* rgmii_rxd3_m1 */
+ <2 RK_PD0 2 &pcfg_pull_none>,
+ /* rgmii_txclk_m1 */
+ <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd2_m1 */
<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
/* rgmii_txd3_m1 */
- <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
- /* rgmii_txen_m1 */
- <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+ <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+ };
+ /omit-if-no-ref/
+ rgmiim1_mclkinout: rgmiim1-mclkinout {
+ rockchip,pins =
+ /* rgmii_clk_m1 */
+ <2 RK_PB7 2 &pcfg_pull_none>;
};
};
sdmmc0 {
/* uart3_tx_m0 */
<3 RK_PC6 4 &pcfg_pull_up>;
};
+ /omit-if-no-ref/
+ uart3m2_xfer: uart3m2-xfer {
+ rockchip,pins =
+ /* uart3_rx_m2 */
+ <3 RK_PA1 4 &pcfg_pull_up>,
+ /* uart3_tx_m2 */
+ <3 RK_PA0 4 &pcfg_pull_up>;
+ };
};
uart4 {
/omit-if-no-ref/
/* uart4_tx_m0 */
<3 RK_PA4 4 &pcfg_pull_up>;
};
+ /omit-if-no-ref/
+ uart4m2_xfer: uart4m2-xfer {
+ rockchip,pins =
+ /* uart4_rx_m2 */
+ <1 RK_PD4 3 &pcfg_pull_up>,
+ /* uart4_tx_m2 */
+ <1 RK_PD5 3 &pcfg_pull_up>;
+ };
};
uart5 {
/omit-if-no-ref/
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+ model = "Sonoff iHost 4G";
+ compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ sdio_pwrseq: pwrseq-sdio {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_npu_vepu: DCDC_REG1 {
+ regulator-name = "vdd_npu_vepu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-name = "vcc_buck5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcc_0v8: LDO_REG1 {
+ regulator-name = "vcc_0v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG2 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd0v8_pmu: LDO_REG3 {
+ regulator-name = "vcc0v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <800000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_dovdd: LDO_REG5 {
+ regulator-name = "vcc_dovdd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_dvdd: LDO_REG6 {
+ regulator-name = "vcc_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_avdd: LDO_REG7 {
+ regulator-name = "vcc_avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG9 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0: SWITCH_REG1 {
+ regulator-name = "vcc_5v0";
+ };
+
+ vcc_3v3: SWITCH_REG2 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&gmac {
+ assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+ <&cru CLK_GMAC_TX_RX>;
+ assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+ <&cru RMII_MODE_CLK>;
+ assigned-clock-rates = <0>, <50000000>;
+ clock_in_out = "output";
+ phy-handle = <&phy>;
+ phy-mode = "rmii";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+ status = "okay";
+};
+
+&mdio {
+ phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_phy_rst>;
+ reset-active-low;
+ reset-assert-us = <50000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy_rst: eth-phy-rst {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+ bt {
+ bt_enable: bt-enable {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_dev: bt-wake-dev {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio0-supply = <&vcc1v8_pmu>;
+ pmuio1-supply = <&vcc3v3_sys>;
+ vccio1-supply = <&vcc_1v8>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_1v8>;
+ vccio4-supply = <&vcc_dovdd>;
+ vccio5-supply = <&vcc_1v8>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_dovdd>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+ enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+ host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+ max-speed = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m2_xfer>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m2_xfer>;
+ status = "okay";
+};
aliases {
i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
};
cpus {
status = "disabled";
};
+ i2c2: i2c@ff400000 {
+ compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+ reg = <0xff400000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,grf = <&pmugrf>;
+ clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart1: serial@ff410000 {
compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
reg = <0xff410000 0x100>;
camera: camera@11800000 {
compatible = "samsung,fimc";
+ ranges = <0x0 0x11800000 0xa0000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
#clock-cells = <1>;
clock-output-names = "cam_a_clkout", "cam_b_clkout";
- ranges;
- fimc_0: fimc@11800000 {
+ fimc_0: fimc@0 {
compatible = "samsung,exynos4210-fimc";
- reg = <0x11800000 0x1000>;
+ reg = <0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
status = "disabled";
};
- fimc_1: fimc@11810000 {
+ fimc_1: fimc@10000 {
compatible = "samsung,exynos4210-fimc";
- reg = <0x11810000 0x1000>;
+ reg = <0x00010000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
status = "disabled";
};
- fimc_2: fimc@11820000 {
+ fimc_2: fimc@20000 {
compatible = "samsung,exynos4210-fimc";
- reg = <0x11820000 0x1000>;
+ reg = <0x00020000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
status = "disabled";
};
- fimc_3: fimc@11830000 {
+ fimc_3: fimc@30000 {
compatible = "samsung,exynos4210-fimc";
- reg = <0x11830000 0x1000>;
+ reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
status = "disabled";
};
- csis_0: csis@11880000 {
+ csis_0: csis@80000 {
compatible = "samsung,exynos4210-csis";
- reg = <0x11880000 0x4000>;
+ reg = <0x00080000 0x4000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>,
<&clock CLK_SCLK_CSIS0>;
#size-cells = <0>;
};
- csis_1: csis@11890000 {
+ csis_1: csis@90000 {
compatible = "samsung,exynos4210-csis";
- reg = <0x11890000 0x4000>;
+ reg = <0x00090000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS1>,
<&clock CLK_SCLK_CSIS1>;
};
};
+ i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+
+ touchscreen@20 {
+ compatible = "cypress,aries-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&gpl0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&vtouchled_reg>;
+ vcc-supply = <&vtouch_reg>;
+ linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+ };
+ };
+
spi-3 {
compatible = "spi-gpio";
#address-cells = <1>;
vusb_a-supply = <&vusbdac_reg>;
};
+&i2c_1 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+
+ lis3dh: accelerometer@19 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x19>;
+
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
+
&i2c_3 {
status = "okay";
regulator-name = "TOUCH_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
};
vpll_reg: LDO10 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ /*
+ * Force-enable this regulator; otherwise the
+ * kernel hangs very early in the boot process
+ * for about 12 seconds, without apparent
+ * reason.
+ */
+ regulator-always-on;
};
vcclcd_reg: LDO13 {
};
&fimd {
+ samsung,invert-vclk;
status = "okay";
};
};
&camera {
+ ranges = <0x0 0x11800000 0xba1000>;
clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
/* fimc_[0-3] are configured outside, under phandles */
- fimc_lite_0: fimc-lite@12390000 {
+ fimc_lite_0: fimc-lite@b90000 {
compatible = "samsung,exynos4212-fimc-lite";
- reg = <0x12390000 0x1000>;
+ reg = <0x00b90000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
status = "disabled";
};
- fimc_lite_1: fimc-lite@123a0000 {
+ fimc_lite_1: fimc-lite@ba0000 {
compatible = "samsung,exynos4212-fimc-lite";
- reg = <0x123a0000 0x1000>;
+ reg = <0x00ba0000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
status = "disabled";
};
- fimc_is: fimc-is@12000000 {
+ fimc_is: fimc-is@800000 {
compatible = "samsung,exynos4212-fimc-is";
- reg = <0x12000000 0x260000>;
+ reg = <0x00800000 0x260000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
<&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
iommu-names = "isp", "drc", "fd", "mcuctl";
+ samsung,pmu-syscon = <&pmu_system_controller>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
- pmu@10020000 {
- reg = <0x10020000 0x3000>;
- };
-
- i2c1_isp: i2c-isp@12140000 {
+ i2c1_isp: i2c-isp@940000 {
compatible = "samsung,exynos4212-i2c-isp";
- reg = <0x12140000 0x100>;
+ reg = <0x00940000 0x100>;
clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
clock-names = "i2c_isp";
#address-cells = <1>;
camera: camera@fa600000 {
compatible = "samsung,fimc";
+ ranges = <0x0 0xfa600000 0xe01000>;
clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
clock-names = "sclk_cam0", "sclk_cam1";
#address-cells = <1>;
#size-cells = <1>;
#clock-cells = <1>;
clock-output-names = "cam_a_clkout", "cam_b_clkout";
- ranges;
- csis0: csis@fa600000 {
+ csis0: csis@0 {
compatible = "samsung,s5pv210-csis";
- reg = <0xfa600000 0x4000>;
+ reg = <0x00000000 0x4000>;
interrupt-parent = <&vic2>;
interrupts = <29>;
clocks = <&clocks CLK_CSIS>,
#size-cells = <0>;
};
- fimc0: fimc@fb200000 {
+ fimc0: fimc@c00000 {
compatible = "samsung,s5pv210-fimc";
- reg = <0xfb200000 0x1000>;
+ reg = <0x00c00000 0x1000>;
interrupts = <5>;
interrupt-parent = <&vic2>;
clocks = <&clocks CLK_FIMC0>,
samsung,cam-if;
};
- fimc1: fimc@fb300000 {
+ fimc1: fimc@d00000 {
compatible = "samsung,s5pv210-fimc";
- reg = <0xfb300000 0x1000>;
+ reg = <0x00d00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <6>;
clocks = <&clocks CLK_FIMC1>,
samsung,lcd-wb;
};
- fimc2: fimc@fb400000 {
+ fimc2: fimc@e00000 {
compatible = "samsung,s5pv210-fimc";
- reg = <0xfb400000 0x1000>;
+ reg = <0x00e00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <7>;
clocks = <&clocks CLK_FIMC2>,
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8012e000 0x80>;
+ reg = <0x8012e000 0x80>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8012e080 0x80>;
+ reg = <0x8012e080 0x80>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e000 0x80>;
+ reg = <0x8000e000 0x80>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e080 0x80>;
+ reg = <0x8000e080 0x80>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e100 0x80>;
+ reg = <0x8000e100 0x80>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8000e180 0x80>;
+ reg = <0x8000e180 0x80>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8011e000 0x80>;
+ reg = <0x8011e000 0x80>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0x8011e080 0x80>;
+ reg = <0x8011e080 0x80>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
- reg = <0xa03fe000 0x80>;
+ reg = <0xa03fe000 0x80>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
soc {
prcmu@80157000 {
ab8500 {
+ phy {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ regulator {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+
gpio {
/* Hog a few default settings */
pinctrl-names = "default";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8505 {
+ phy {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ regulator {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+
+ gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio4_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio12_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio16_default_mode>,
+ <&gpio24_default_mode>,
+ <&gpio25_default_mode>,
+ <&gpio36_default_mode>,
+ <&gpio37_default_mode>,
+ <&gpio38_default_mode>,
+ <&gpio39_default_mode>,
+ <&gpio42_default_mode>,
+ <&gpio26_default_mode>,
+ <&gpio35_default_mode>,
+ <&ycbcr_default_mode>,
+ <&pwm_default_mode>,
+ <&adi1_default_mode>,
+ <&usbuicc_default_mode>,
+ <&dmic_default_mode>,
+ <&extcpena_default_mode>,
+ <&modsclsda_default_mode>;
+
+ /*
+ * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio2_a_1";
+ };
+ default_cfg {
+ pins = "GPIO2_T9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio4 {
+ gpio4_default_mode: gpio4_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio4_a_1";
+ };
+ default_cfg {
+ pins = "GPIO4_W2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio10_d_1";
+ };
+ default_cfg {
+ pins = "GPIO10_U17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio11_d_1";
+ };
+ default_cfg {
+ pins = "GPIO11_AA18";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio12 {
+ gpio12_default_mode: gpio12_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio12_d_1";
+ };
+ default_cfg {
+ pins = "GPIO12_U16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio13_d_1";
+ };
+ default_cfg {
+ pins = "GPIO13_W17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio16 {
+ gpio16_default_mode: gpio16_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio16_a_1";
+ };
+ default_cfg {
+ pins = "GPIO16_F15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio24 {
+ gpio24_default_mode: gpio24_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio24_a_1";
+ };
+ default_cfg {
+ pins = "GPIO24_T14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio25 {
+ gpio25_default_mode: gpio25_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio25_a_1";
+ };
+ default_cfg {
+ pins = "GPIO25_R16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio36 {
+ gpio36_default_mode: gpio36_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio36_a_1";
+ };
+ default_cfg {
+ pins = "GPIO36_A17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio37 {
+ gpio37_default_mode: gpio37_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio37_a_1";
+ };
+ default_cfg {
+ pins = "GPIO37_E15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio38 {
+ gpio38_default_mode: gpio38_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio38_a_1";
+ };
+ default_cfg {
+ pins = "GPIO38_C17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio39 {
+ gpio39_default_mode: gpio39_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio39_a_1";
+ };
+ default_cfg {
+ pins = "GPIO39_E16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio42 {
+ gpio42_default_mode: gpio42_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio42_a_1";
+ };
+ default_cfg {
+ pins = "GPIO42_U2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+ */
+ gpio26 {
+ gpio26_default_mode: gpio26_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio26_d_1";
+ };
+ default_cfg {
+ pins = "GPIO26_M16";
+ output-low;
+ };
+ };
+ };
+ gpio35 {
+ gpio35_default_mode: gpio35_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio35_d_1";
+ };
+ default_cfg {
+ pins = "GPIO35_W15";
+ output-low;
+ };
+ };
+ };
+ /*
+ * This sets up the YCBCR connector pins, i.e. analog video out.
+ * Set as input with no bias.
+ */
+ ycbcr {
+ ycbcr_default_mode: ycbcr_default {
+ default_mux {
+ function = "ycbcr";
+ groups = "ycbcr0123_d_1";
+ };
+ default_cfg {
+ pins = "GPIO6_Y18",
+ "GPIO7_AA20",
+ "GPIO8_W18",
+ "GPIO9_AA19";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ /* This sets up the PWM pins 14 and 15 */
+ pwm {
+ pwm_default_mode: pwm_default {
+ default_mux {
+ function = "pwmout";
+ groups = "pwmout1_d_1", "pwmout2_d_1";
+ };
+ default_cfg {
+ pins = "GPIO14_F14",
+ "GPIO15_B17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up audio interface 1 */
+ adi1 {
+ adi1_default_mode: adi1_default {
+ default_mux {
+ function = "adi1";
+ groups = "adi1_d_1";
+ };
+ default_cfg {
+ pins = "GPIO17_P5",
+ "GPIO18_R5",
+ "GPIO19_U5",
+ "GPIO20_T5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the USB UICC pins */
+ usbuicc {
+ usbuicc_default_mode: usbuicc_default {
+ default_mux {
+ function = "usbuicc";
+ groups = "usbuicc_d_1";
+ };
+ default_cfg {
+ pins = "GPIO21_H19",
+ "GPIO22_G20",
+ "GPIO23_G19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the microphone pins */
+ dmic {
+ dmic_default_mode: dmic_default {
+ default_mux {
+ function = "dmic";
+ groups = "dmic12_d_1",
+ "dmic34_d_1",
+ "dmic56_d_1";
+ };
+ default_cfg {
+ pins = "GPIO27_J6",
+ "GPIO28_K6",
+ "GPIO29_G6",
+ "GPIO30_H6",
+ "GPIO31_F5",
+ "GPIO32_G5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ extcpena {
+ extcpena_default_mode: extcpena_default {
+ default_mux {
+ function = "extcpena";
+ groups = "extcpena_d_1";
+ };
+ default_cfg {
+ pins = "GPIO34_R17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ function = "modsclsda";
+ groups = "modsclsda_d_1";
+ };
+ default_cfg {
+ pins = "GPIO40_T19",
+ "GPIO41_U19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Clock output pins associated with regulators.
+ */
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ pins = "GPIO1_T10";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq2_sleep_mode: sysclkreq2_sleep {
+ default_mux {
+ function = "gpio";
+ groups = "gpio1_a_1";
+ };
+ default_cfg {
+ pins = "GPIO1_T10";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ sysclkreq4 {
+ sysclkreq4_default_mode: sysclkreq4_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq4_d_1";
+ };
+ default_cfg {
+ pins = "GPIO3_U9";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq4_sleep_mode: sysclkreq4_sleep {
+ default_mux {
+ function = "gpio";
+ groups = "gpio3_a_1";
+ };
+ default_cfg {
+ pins = "GPIO3_U9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ };
+ /*
+ * Charging is not working on the HREF unless an actual battery is
+ * mounted, most HREFs have a DC cable in to the "battery power"
+ * which means this will only be cofusing. So do not enable charging
+ * of the HREFs.
+ */
+ ab8500_fg {
+ status = "disabled";
+ };
+ ab8500_btemp {
+ status = "disabled";
+ };
+ ab8500_charger {
+ status = "disabled";
+ };
+ ab8500_chargalg {
+ status = "disabled";
+ };
+ };
+ };
+ };
+};
status = "okay";
};
- prcmu@80157000 {
- ab8500 {
- gpio {
- };
-
- phy {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&usb_a_1_default>;
- pinctrl-1 = <&usb_a_1_sleep>;
- };
-
- regulator {
- ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- regulator-name = "V-DISPLAY";
- };
-
- ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
- regulator-name = "V-eMMC1";
- };
-
- ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
- regulator-name = "V-MMC-SD";
- };
-
- ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
- regulator-name = "V-INTCORE";
- };
-
- ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
- regulator-name = "V-TVOUT";
- };
-
- ab8500_ldo_audio_reg: ab8500_ldo_audio {
- regulator-name = "V-AUD";
- };
-
- ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
- regulator-name = "V-AMIC1";
- };
-
- ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
- regulator-name = "V-AMIC2";
- };
-
- ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
- regulator-name = "V-DMIC";
- };
-
- ab8500_ldo_ana_reg: ab8500_ldo_ana {
- regulator-name = "V-CSI/DSI";
- };
- };
- };
- };
-
pinctrl {
sdi0 {
sdi0_default_mode: sdi0_default {
/dts-v1/;
#include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-tvk1281618-r3.dtsi"
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-stuib.dtsi"
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-tvk1281618-r2.dtsi"
// External Micro SD slot
mmc@80126000 {
- cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
};
pinctrl {
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-stuib.dtsi"
/dts-v1/;
#include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-hrefv60plus.dtsi"
#include "ste-href-tvk1281618-r2.dtsi"
* Copyright 2012 ST-Ericsson AB
*/
-#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
/ {
// External Micro SD slot
mmc@80126000 {
- cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+ cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
pinctrl {
gpio0: gpio@101e4000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e4000 0x80>;
+ reg = <0x101e4000 0x80>;
interrupt-parent = <&vica>;
interrupts = <6>;
interrupt-controller;
gpio1: gpio@101e5000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e5000 0x80>;
+ reg = <0x101e5000 0x80>;
interrupt-parent = <&vica>;
interrupts = <7>;
interrupt-controller;
gpio2: gpio@101e6000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e6000 0x80>;
+ reg = <0x101e6000 0x80>;
interrupt-parent = <&vica>;
interrupts = <8>;
interrupt-controller;
gpio3: gpio@101e7000 {
compatible = "st,nomadik-gpio";
- reg = <0x101e7000 0x80>;
+ reg = <0x101e7000 0x80>;
ngpio = <28>;
interrupt-parent = <&vica>;
interrupts = <9>;
pinctrl-1 = <&mc0_a_1_sleep>;
/* GPIO218 MMC_CD */
- cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
/* "flash detect" actually card detect */
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_2_default>;
pinctrl-1 = <&mc0_a_2_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mc0_a_1_default>;
pinctrl-1 = <&mc0_a_1_sleep>;
- cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
status = "okay";
};
reg = <0x42>;
interrupts = <8 3>;
interrupt-parent = <&gpioi>;
- interrupt-controller;
wakeup-source;
stmpegpio: stmpe_gpio {
serial0 = &usart3;
};
- mmc_vcard: mmc_vcard {
+ vcc_3v3: vcc-3v3 {
compatible = "regulator-fixed";
- regulator-name = "mmc_vcard";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_dsi: vdd-dsi {
- compatible = "regulator-fixed";
- regulator-name = "vdd_dsi";
+ regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
- power-supply = <&vdd_dsi>;
+ power-supply = <&vcc_3v3>;
status = "okay";
port {
&sdio {
status = "okay";
- vmmc-supply = <&mmc_vcard>;
+ vmmc-supply = <&vcc_3v3>;
cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
};
+ spi2: spi@40003800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003800 0x400>;
+ interrupts = <36>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+ status = "disabled";
+ };
+
+ spi3: spi@40003c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40003c00 0x400>;
+ interrupts = <51>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+ status = "disabled";
+ };
+
usart2: serial@40004400 {
compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
status = "disabled";
};
+ spi1: spi@40013000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013000 0x400>;
+ interrupts = <35>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+ status = "disabled";
+ };
+
+ spi4: spi@40013400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40013400 0x400>;
+ interrupts = <84>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+ status = "disabled";
+ };
+
syscfg: syscon@40013800 {
compatible = "st,stm32-syscfg", "syscon";
reg = <0x40013800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
};
exti: interrupt-controller@40013c00 {
};
};
+ spi5: spi@40015000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015000 0x400>;
+ interrupts = <85>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+ status = "disabled";
+ };
+
+ spi6: spi@40015400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32f7-spi";
+ reg = <0x40015400 0x400>;
+ interrupts = <86>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+ status = "disabled";
+ };
+
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
/ {
soc {
+ dcmipp: dcmipp@5a000000 {
+ compatible = "st,stm32mp13-dcmipp";
+ reg = <0x5a000000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc DCMIPP_R>;
+ clocks = <&rcc DCMIPP_K>;
+ status = "disabled";
+
+ port {
+ };
+ };
};
};
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
status = "disabled";
};
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
companion = <&usbh_ohci>;
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
status = "disabled";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
/ {
model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
- compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+ compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
reserved-memory {
optee@de000000 {
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
/ {
model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
- compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+ compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
reserved-memory {
optee@de000000 {
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
reg = <0x38>;
interrupts = <2 2>;
interrupt-parent = <&gpiof>;
- interrupt-controller;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
status = "okay";
/ {
model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
- compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+ compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
reserved-memory {
optee@fe000000 {
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
/ {
model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
- compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
- "st,stm32mp157";
+ compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
reserved-memory {
optee@fe000000 {
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
-
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
};
&usbh_ohci {
- phys = <&usbphyc_port0>;
status = "okay";
};
};
&usbh_ehci {
- phys = <&usbphyc_port0>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <528 16>;
#include "keystone-k2g.dtsi"
/ {
- compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
+ compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
model = "Texas Instruments K2G General Purpose EVM";
memory@800000000 {
qpend {
qpend-0 {
qrange = <77 8>;
- interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
- 0 311 0xf04 0 312 0xf04 0 313 0xf04
- 0 314 0xf04 0 315 0xf04>;
+ interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+ 0 311 0xf04 0 312 0xf04 0 313 0xf04
+ 0 314 0xf04 0 315 0xf04>;
qalloc-by-id;
};
};
#include "keystone-k2hk.dtsi"
/ {
- compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
reserved-memory {
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <8704 16>;
qpend {
qpend-0 {
qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
+ interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
};
qpend-1 {
qrange = <528 16>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
- tpm_spi_tis@0 {
+ tpm@0 {
compatible = "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <500000>;
};
&extcon_usb2 {
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
ti,enable-id-detection;
- id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
};
reg = <0x41>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio2>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
};
&extcon_usb2 {
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
sound0: sound0 {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&ipu2 {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&m_can0 {
&uart2 {
/delete-property/dma-names;
- bluetooth {
+ bluetooth-gnss {
compatible = "ti,wl1283-st";
enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
max-speed = <3000000>;
#include "motorola-cpcap-mapphone.dtsi"
/ {
- chosen {
- stdout-path = &uart3;
- };
-
- aliases {
- display0 = &lcd0;
- display1 = &hdmi0;
- };
-
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
* then 1023 - 1024 seems to contain mbm.
regulator-always-on;
};
- /* FS USB Host PHY on port 1 for mdm6600 */
- fsusb1_phy: usb-phy@1 {
- compatible = "motorola,mapphone-mdm6600";
- pinctrl-0 = <&usb_mdm6600_pins>;
- pinctrl-1 = <&usb_mdm6600_sleep_pins>;
- pinctrl-names = "default", "sleep";
- enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
- power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
- reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
- /* mode: gpio_148 gpio_149 */
- motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
- <&gpio5 21 GPIO_ACTIVE_HIGH>;
- /* cmd: gpio_103 gpio_104 gpio_142 */
- motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
- <&gpio4 8 GPIO_ACTIVE_HIGH>,
- <&gpio5 14 GPIO_ACTIVE_HIGH>;
- /* status: gpio_52 gpio_53 gpio_55 */
- motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
- <&gpio2 21 GPIO_ACTIVE_HIGH>,
- <&gpio2 23 GPIO_ACTIVE_HIGH>;
- #phy-cells = <0>;
- };
-
- /* HS USB host TLL nop-phy on port 2 for w3glte */
- hsusb2_phy: usb-phy@2 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-
- /* LCD regulator from sw5 source */
- lcd_regulator: regulator-lcd {
- compatible = "regulator-fixed";
- regulator-name = "lcd";
- regulator-min-microvolt = <5050000>;
- regulator-max-microvolt = <5050000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
- enable-active-high;
- vin-supply = <&sw5>;
- };
-
/* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
-
- pwm8: pwm-8 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_direction_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer8>;
- ti,clock-source = <0x01>;
- };
-
- pwm9: pwm-9 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_enable_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer9>;
- ti,clock-source = <0x01>;
- };
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
- pwm-names = "enable", "direction";
- direction-duty-cycle-ns = <10000000>;
- };
-
- backlight: backlight {
- compatible = "led-backlight";
-
- leds = <&backlight_led>;
- brightness-levels = <31 63 95 127 159 191 223 255>;
- default-brightness-level = <6>;
- };
};
&cpu_thermal {
status = "okay";
};
-&dsi1 {
- status = "okay";
- vdd-supply = <&vcsi>;
-
- port {
- dsi1_out_ep: endpoint {
- remote-endpoint = <&lcd0_in>;
- lanes = <0 1 2 3 4 5>;
- };
- };
-
- lcd0: panel@0 {
- compatible = "motorola,droid4-panel", "panel-dsi-cm";
- reg = <0>;
- label = "lcd0";
- vddi-supply = <&lcd_regulator>;
- reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
-
- backlight = <&backlight>;
-
- width-mm = <50>;
- height-mm = <89>;
- rotation = <90>;
-
- panel-timing {
- clock-frequency = <0>; /* Calculated by dsi */
-
- hback-porch = <2>;
- hactive = <540>;
- hfront-porch = <0>;
- hsync-len = <2>;
-
- vback-porch = <1>;
- vactive = <960>;
- vfront-porch = <0>;
- vsync-len = <1>;
-
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- port {
- lcd0_in: endpoint {
- remote-endpoint = <&dsi1_out_ep>;
- };
- };
- };
-};
-
&hdmi {
status = "okay";
pinctrl-0 = <&dss_hdmi_pins>;
};
};
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
- pinctrl-0 = <&hdq_pins>;
- pinctrl-names = "default";
- ti,mode = "1w";
-};
-
&i2c1 {
tmp105@48 {
compatible = "ti,tmp105";
};
};
-&i2c2 {
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_pins>;
-
- reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
- /* gpio_183 with sys_nirq2 pad as wakeup */
- interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
- <&omap4_pmx_core 0x160>;
- interrupt-names = "irq", "wakeup";
- wakeup-source;
- };
-
- isl29030@44 {
- compatible = "isil,isl29030";
- reg = <0x44>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&als_proximity_pins>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
- };
-};
-
&omap4_pmx_core {
/* hdmi_hpd.gpio_63 */
>;
};
- hdq_pins: hdq-pins {
- pinctrl-single,pins = <
- /* 0x4a100120 hdq_sio.hdq_sio aa27 */
- OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
- >;
- };
-
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: dss-hdmi-pins {
pinctrl-single,pins = <
>;
};
- touchscreen_pins: touchscreen-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- als_proximity_pins: als-proximity-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- usb_mdm6600_pins: usb-mdm6600-pins {
- pinctrl-single,pins = <
- /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
- /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
- /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
- OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
- /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
- /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
- /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
- /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
- /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
- /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
- /* Modem sleep pins to keep gpio_49 high with internal pull */
- usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
usb_ulpi_pins: usb-ulpi-pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-
- vibrator_direction_pin: vibrator-direction-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
- >;
- };
-
- vibrator_enable_pin: vibrator-enable-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
- >;
- };
};
&omap4_pmx_wkup {
status = "disabled";
};
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
- assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
- assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
/*
* The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
* for wake-up events for both the USB PHY and the UART. We can use gpio_149
};
};
-&usbhsohci {
- phys = <&fsusb1_phy>;
- phy-names = "usb";
-};
-
-&usbhsehci {
- phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
- port1-mode = "ohci-phy-4pin-dpdm";
- port2-mode = "ehci-tll";
-};
-
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
interface-type = <1>;
power = <150>;
};
-&i2c4 {
- ak8975: magnetometer@c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
-
- vdd-supply = <&vhvio>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
- rotation-matrix = "-1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-
- };
-};
-
&mcbsp2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ /* FS USB Host PHY on port 1 for mdm6600 */
+ fsusb1_phy: usb-phy@1 {
+ compatible = "motorola,mapphone-mdm6600";
+ pinctrl-0 = <&usb_mdm6600_pins>;
+ pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+ pinctrl-names = "default", "sleep";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
+ /* mode: gpio_148 gpio_149 */
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ /* cmd: gpio_103 gpio_104 gpio_142 */
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ /* status: gpio_52 gpio_53 gpio_55 */
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB host TLL nop-phy on port 2 for w3glte */
+ hsusb2_phy: usb-phy@2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ pwm8: pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+ pinctrl-0 = <&hdq_pins>;
+ pinctrl-names = "default";
+ ti,mode = "1w";
+};
+
+&i2c2 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+ <&omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+
+ isl29030@44 {
+ compatible = "isil,isl29030";
+ reg = <0x44>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&als_proximity_pins>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+ };
+};
+
+&omap4_pmx_core {
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ /* 0x4a100120 hdq_sio.hdq_sio aa27 */
+ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: tmp105-irq-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ touchscreen_pins: touchscreen-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_mdm6600_pins: usb-mdm6600-pins {
+ pinctrl-single,pins = <
+ /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+ /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+ /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+ /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+ /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+ /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+ /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ /* Modem sleep pins to keep gpio_49 high with internal pull */
+ usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ als_proximity_pins: als-proximity-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ vibrator_direction_pin: vibrator-direction-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: vibrator-enable-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+ assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+ assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+};
+
+&usbhsehci {
+ phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+ <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+ vmmc-supply = <&vsimcard>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+
+ /* LCD regulator from sw5 source */
+ lcd_regulator: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ enable-active-high;
+ vin-supply = <&sw5>;
+ };
+};
+
+&dsi1 {
+ status = "okay";
+ vdd-supply = <&vcsi>;
+
+ port {
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+ };
+
+ lcd0: panel@0 {
+ compatible = "motorola,droid4-panel", "panel-dsi-cm";
+ reg = <0>;
+ label = "lcd0";
+ vddi-supply = <&lcd_regulator>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ backlight = <&backlight>;
+
+ width-mm = <50>;
+ height-mm = <89>;
+ rotation = <90>;
+
+ panel-timing {
+ clock-frequency = <0>; /* Calculated by dsi */
+
+ hback-porch = <2>;
+ hactive = <540>;
+ hfront-porch = <0>;
+ hsync-len = <2>;
+
+ vback-porch = <1>;
+ vactive = <960>;
+ vfront-porch = <0>;
+ vsync-len = <1>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
model = "Motorola Droid Bionic XT875";
compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
};
&keypad {
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
/ {
+ model = "Motorola Droid 4 XT894";
+ compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi0;
+ };
+
gpio_keys {
compatible = "gpio-keys";
};
};
-/ {
- model = "Motorola Droid 4 XT894";
- compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
regulator-name = "unknown";
};
+ wl12xx_pwrseq: wl12xx-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&twl 1>;
+ clock-names = "ext_clock";
+ };
+
/* regulator for wl12xx on sdio2 */
wl12xx_vmmc: wl12xx-vmmc {
pinctrl-names = "default";
twl: pmic@48 {
compatible = "ti,twl6032";
reg = <0x48>;
+ #clock-cells = <1>;
/* IRQ# = 7 */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-controller;
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_pins>;
vmmc-supply = <&wl12xx_vmmc>;
+ mmc-pwrseq = <&wl12xx_pwrseq>;
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core 0x12e>;
non-removable;
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
&omap4_pmx_core OMAP4_UART2_RX>;
- /*
- * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
- * which does not have a driver
- */
+ bluetooth-gnss {
+ compatible = "ti,wl1283-st";
+ enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; /* GPIO_25 */
+ clocks = <&twl 1>;
+ clock-names = "ext_clock";
+ };
};
&uart3 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ609";
+ compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+
+ backlight: backlight {
+ compatible = "led-backlight";
+
+ leds = <&backlight_led>;
+ brightness-levels = <31 63 95 127 159 191 223 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+ model = "Motorola Xyboard MZ617";
+ compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ display1 = &hdmi0;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "OrangePi Zero 2W";
+ compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the USB-C socket */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ /* SY8089 DC/DC converter */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_vcc5v>;
+ regulator-always-on;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&mmc0 {
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_dldo1>;
+ vcc-pf-supply = <®_dldo1>; /* internally via VCC-IO */
+ vcc-pg-supply = <®_aldo1>;
+ vcc-ph-supply = <®_dldo1>; /* internally via VCC-IO */
+ vcc-pi-supply = <®_dldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&pio>;
+ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ /* Supplies VCC-PLL and DRAM */
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Supplies VCC-IO, so needs to be always on. */
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-dram";
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usbotg {
+ /*
+ * PHY0 pins are connected to a USB-C socket, but a role switch
+ * is not implemented: both CC pins are pulled to GND.
+ * The VBUS pins power the device, so a fixed peripheral mode
+ * is the best choice.
+ * The board can be powered via GPIOs, in this case port0 *can*
+ * act as a host (with a cable/adapter ignoring CC), as VBUS is
+ * then provided by the GPIOs. Any user of this setup would
+ * need to adjust the DT accordingly: dr_mode set to "host",
+ * enabling OHCI0 and EHCI0.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc5v>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "Transpeed 8K618-T";
+ compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ /* discrete 3.3V regulator */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dldo1>;
+ cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_dldo1>;
+ vqmmc-supply = <®_aldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8-pll";
+ };
+
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3-io-mmc";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vdd-dram";
+ };
+ };
+ };
+};
+
+&pio {
+ vcc-pc-supply = <®_aldo1>;
+ vcc-pg-supply = <®_dldo1>;
+ vcc-ph-supply = <®_dldo1>;
+ vcc-pi-supply = <®_dldo1>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host"; /* USB A type receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
};
};
+ firmware {
+ svc {
+ compatible = "intel,stratix10-svc";
+ method = "smc";
+ memory-region = <&service_reserved>;
+
+ fpga_mgr: fpga-mgr {
+ compatible = "intel,stratix10-soc-fpga-mgr";
+ };
+ };
+ };
+
+ fpga-region {
+ compatible = "fpga-region";
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ fpga-mgr = <&fpga_mgr>;
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 170 4>,
};
};
- soc {
+ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges = <0 0 0 0xffffffff>;
- base_fpga_region {
- #address-cells = <0x2>;
- #size-cells = <0x2>;
- compatible = "fpga-region";
- fpga-mgr = <&fpga_mgr>;
- };
-
clkmgr: clock-controller@ffd10000 {
compatible = "intel,stratix10-clkmgr";
reg = <0xffd10000 0x1000>;
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
reset-names = "dwc2", "dwc2-ecc";
clocks = <&clkmgr STRATIX10_USB_CLK>;
+ clock-names = "otg";
iommus = <&smmu 7>;
status = "disabled";
};
status = "disabled";
};
-
- firmware {
- svc {
- compatible = "intel,stratix10-svc";
- method = "smc";
- memory-region = <&service_reserved>;
-
- fpga_mgr: fpga-mgr {
- compatible = "intel,stratix10-soc-fpga-mgr";
- };
- };
- };
};
usbphy0: usbphy0 {
regulator-max-microvolt = <330000>;
};
- soc {
+ soc@0 {
eccmgr {
sdmmca-ecc@ff8c8c00 {
compatible = "altr,socfpga-s10-sdmmc-ecc",
};
&pinctrl0 {
- i2c1_pmx_func: i2c1-pmx-func {
+ i2c1_pmx_func: i2c1-pmx-func-pins {
pinctrl-single,pins = <
0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */
0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */
>;
};
- i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+ i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
pinctrl-single,pins = <
0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */
0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <1>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
regulator-max-microvolt = <330000>;
};
- soc {
+ soc@0 {
eccmgr {
sdmmca-ecc@ff8c8c00 {
compatible = "altr,socfpga-s10-sdmmc-ecc",
&nand {
status = "okay";
- flash@0 {
+ nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <1>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
&mmc {
status = "okay";
- altr,dw-mshc-ciu-div = <0x3>;
- altr,dw-mshc-sdr-timing = <0x0 0x3>;
cap-sd-highspeed;
cap-mmc-highspeed;
broken-cd;
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
- interrupt-controller;
msi-controller;
al,msi-base-spi = <160>;
al,msi-num-spis = <160>;
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
- interrupt-controller;
msi-controller;
al,msi-base-spi = <336>;
al,msi-num-spis = <959>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ watchdog@2100 {
+ compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+ reg = <0x0 0x2100 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+
periphs_pinctrl: pinctrl@4000 {
compatible = "amlogic,c3-periphs-pinctrl";
#address-cells = <2>;
&uart_B {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
};
};
+
+&i2c_AO {
+ /* EEPROM on base board */
+ eeprompd: eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ pagesize = <0x20>;
+ label = "eeprompd";
+ address-width = <0x10>;
+ vcc-supply = <&vddao_3v3>;
+ };
+};
&sd_emmc_b {
broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
};
+
+&i2c_AO {
+ /* EEPROM on base board */
+ eeprompd: eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ pagesize = <0x20>;
+ label = "eeprompd";
+ address-width = <0x10>;
+ vcc-supply = <&vddao_3v3>;
+ };
+};
VDDA-supply = <&vcc_3v3>;
VDDP-supply = <&vcc_3v3>;
VDDD-supply = <&vcc_3v3>;
- status = "okay";
sound-name-prefix = "Linein";
};
compatible = "everest,es7154";
VDD-supply = <&vcc_3v3>;
PVDD-supply = <&vcc_5v>;
- status = "okay";
sound-name-prefix = "Lineout";
};
spdif_dit: audio-codec-2 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
compatible = "dmic-codec";
num-channels = <7>;
wakeup-delay-ms = <50>;
- status = "okay";
sound-name-prefix = "MIC";
};
spdif_dir: audio-codec-4 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dir";
- status = "okay";
sound-name-prefix = "DIR";
};
};
};
+ nand_all_pins: nand-all-pins {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "nand_ce0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr";
+ function = "nand";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
emmc_ds_pins: emmc_ds {
mux {
groups = "emmc_ds";
reg = <0x0 0x7800 0x0 0x100>,
<0x0 0x7000 0x0 0x800>;
reg-names = "nfc", "emmc";
+ pinctrl-0 = <&nand_all_pins>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
compatible = "dmic-codec";
num-channels = <2>;
wakeup-delay-ms = <50>;
- status = "okay";
sound-name-prefix = "MIC";
};
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
spdif_dit: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
- status = "okay";
sound-name-prefix = "DIT";
};
#size-cells = <2>;
aliases {
- serial0 = &uart_B;
+ serial0 = &uart_b;
};
memory@0 {
reg = <0x0 0x0 0x0 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 52 MiB reserved for ARM Trusted Firmware */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x3400000>;
+ no-map;
+ };
+ };
};
-&uart_B {
+&uart_b {
status = "okay";
};
pinctrl-0 = <&remote_pins>;
pinctrl-names = "default";
};
+
+&nand {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x00200000>;
+ };
+ partition@200000 {
+ label = "env";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "system";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "media";
+ reg = <0x04000000 0x8000000>;
+ };
+ };
+};
+
+&spicc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spicc0_pins_x>;
+ cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
/ {
cpus {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ clkc_periphs: clock-controller@0 {
+ compatible = "amlogic,s4-peripherals-clkc";
+ reg = <0x0 0x0 0x0 0x49c>;
+ clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV2P5>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV4>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&clkc_pll CLKID_GP0_PLL>,
+ <&clkc_pll CLKID_MPLL0>,
+ <&clkc_pll CLKID_MPLL1>,
+ <&clkc_pll CLKID_MPLL2>,
+ <&clkc_pll CLKID_MPLL3>,
+ <&clkc_pll CLKID_HDMI_PLL>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+ "fclk_div4", "fclk_div5", "fclk_div7",
+ "hifi_pll", "gp0_pll", "mpll0", "mpll1",
+ "mpll2", "mpll3", "hdmi_pll", "xtal";
+ #clock-cells = <1>;
+ };
+
+ clkc_pll: clock-controller@8000 {
+ compatible = "amlogic,s4-pll-clkc";
+ reg = <0x0 0x8000 0x0 0x1e8>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
+ watchdog@2100 {
+ compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+ reg = <0x0 0x2100 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+
periphs_pinctrl: pinctrl@4000 {
compatible = "amlogic,meson-s4-periphs-pinctrl";
#address-cells = <2>;
bias-disable;
};
};
+
+ i2c0_pins1: i2c0-pins1 {
+ mux {
+ groups = "i2c0_sda",
+ "i2c0_scl";
+ function = "i2c0";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins1: i2c1-pins1 {
+ mux {
+ groups = "i2c1_sda_c",
+ "i2c1_scl_c";
+ function = "i2c1";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins2: i2c1-pins2 {
+ mux {
+ groups = "i2c1_sda_d",
+ "i2c1_scl_d";
+ function = "i2c1";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins3: i2c1-pins3 {
+ mux {
+ groups = "i2c1_sda_h",
+ "i2c1_scl_h";
+ function = "i2c1";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins4: i2c1-pins4 {
+ mux {
+ groups = "i2c1_sda_x",
+ "i2c1_scl_x";
+ function = "i2c1";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins1: i2c2-pins1 {
+ mux {
+ groups = "i2c2_sda_d",
+ "i2c2_scl_d";
+ function = "i2c2";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins2: i2c2-pins2 {
+ mux {
+ groups = "i2c2_sda_h8",
+ "i2c2_scl_h9";
+ function = "i2c2";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins3: i2c2-pins3 {
+ mux {
+ groups = "i2c2_sda_h0",
+ "i2c2_scl_h1";
+ function = "i2c2";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c3_pins1: i2c3-pins1 {
+ mux {
+ groups = "i2c3_sda_x",
+ "i2c3_scl_x";
+ function = "i2c3";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c3_pins2: i2c3-pins2 {
+ mux {
+ groups = "i2c3_sda_z",
+ "i2c3_scl_z";
+ function = "i2c3";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c4_pins1: i2c4-pins1 {
+ mux {
+ groups = "i2c4_sda_c",
+ "i2c4_scl_c";
+ function = "i2c4";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c4_pins2: i2c4-pins2 {
+ mux {
+ groups = "i2c4_sda_d",
+ "i2c4_scl_d";
+ function = "i2c4";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ i2c4_pins3: i2c4-pins3 {
+ mux {
+ groups = "i2c4_sda_z",
+ "i2c4_scl_z";
+ function = "i2c4";
+ drive-strength-microamp = <3000>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand-pins {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "nand_ce0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr";
+ function = "nand";
+ input-enable;
+ };
+ };
+
+ spicc0_pins_x: spicc0-pins_x {
+ mux {
+ groups = "spi_a_mosi_x",
+ "spi_a_miso_x",
+ "spi_a_clk_x";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc0_pins_h: spicc0-pins-h {
+ mux {
+ groups = "spi_a_mosi_h",
+ "spi_a_miso_h",
+ "spi_a_clk_h";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ spicc0_pins_z: spicc0-pins-z {
+ mux {
+ groups = "spi_a_mosi_z",
+ "spi_a_miso_z",
+ "spi_a_clk_z";
+ function = "spi_a";
+ drive-strength-microamp = <3000>;
+ };
+ };
+
};
gpio_intc: interrupt-controller@4080 {
<10 11 12 13 14 15 16 17 18 19 20 21>;
};
- uart_B: serial@7a000 {
+ eth_phy: mdio-multiplexer@28000 {
+ compatible = "amlogic,g12a-mdio-mux";
+ reg = <0x0 0x28000 0x0 0xa4>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc_periphs CLKID_ETHPHY>,
+ <&xtal>,
+ <&clkc_pll CLKID_MPLL_50M>;
+ clock-names = "pclk", "clkin0", "clkin1";
+ mdio-parent-bus = <&mdio0>;
+
+ ext_mdio: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ int_mdio: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_ephy: ethernet-phy@8 {
+ compatible = "ethernet-phy-id0180.3301",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+ };
+
+ spicc0: spi@50000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x50000 0x0 0x44>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc_periphs CLKID_SPICC0>,
+ <&clkc_periphs CLKID_SPICC0_EN>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@66000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x66000 0x0 0x20>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_I2C_M_A>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@68000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x68000 0x0 0x20>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_I2C_M_B>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@6a000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6a000 0x0 0x20>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_I2C_M_C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@6c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6c000 0x0 0x20>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_I2C_M_D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@6e000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x6e000 0x0 0x20>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_I2C_M_E>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ nand: nand-controller@8c800 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+ reg-names = "nfc", "emmc";
+ interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+ <&clkc_pll CLKID_FCLK_DIV2>;
+ clock-names = "core", "device";
+ status = "disabled";
+ };
+
+ uart_b: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x7a000 0x0 0x18>;
interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
};
reset: reset-controller@2000 {
reg = <0x0 0x440788 0x0 0x0c>;
};
};
+
+ ethmac: ethernet@fdc00000 {
+ compatible = "amlogic,meson-axg-dwmac",
+ "snps,dwmac-3.70a",
+ "snps,dwmac";
+ reg = <0x0 0xfdc00000 0x0 0x10000>,
+ <0x0 0xfe024000 0x0 0x8>;
+
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ power-domains = <&pwrc PWRC_S4_ETH_ID>;
+ clocks = <&clkc_periphs CLKID_ETH>,
+ <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
+ status = "disabled";
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+ };
};
};
compatible = "dmic-codec";
num-channels = <2>;
wakeup-delay-ms = <50>;
- status = "okay";
sound-name-prefix = "MIC";
};
};
thermal-zones {
- pmic {
+ pmic-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 0>;
};
};
- soc {
+ soc-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 3>;
};
};
- big_cluster_thermal_zone: big-cluster {
+ big_cluster_thermal_zone: big-cluster-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 21>;
status = "disabled";
};
- little_cluster_thermal_zone: little-cluster {
+ little_cluster_thermal_zone: little-cluster-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 22>;
status = "disabled";
};
- gpu0_thermal_zone: gpu0 {
+ gpu0_thermal_zone: gpu0-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 23>;
status = "disabled";
};
- gpu1_thermal_zone: gpu1 {
+ gpu1_thermal_zone: gpu1-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 24>;
};
thermal-zones {
- pmic {
+ pmic-thermal {
thermal-sensors = <&scmi_sensors0 0>;
};
- soc {
+ soc-thermal {
thermal-sensors = <&scmi_sensors0 3>;
};
- big-cluster {
+ big-cluster-thermal {
thermal-sensors = <&scmi_sensors0 21>;
};
- little-cluster {
+ little-cluster-thermal {
thermal-sensors = <&scmi_sensors0 22>;
};
- gpu0 {
+ gpu0-thermal {
thermal-sensors = <&scmi_sensors0 23>;
};
- gpu1 {
+ gpu1-thermal {
thermal-sensors = <&scmi_sensors0 24>;
};
};
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
};
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinmux 0 0 16>,
<&pinmux 16 71 2>,
ranges = <0x0 0x0 0x0 0x18000000>;
chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
+ compatible = "samsung,exynos5433-chipid",
+ "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos7-wakeup-eint";
+ compatible = "samsung,exynos5433-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
adc: adc@14d10000 {
- compatible = "samsung,exynos7-adc";
+ compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
reg = <0x14d10000 0x100>;
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc";
};
i2s1: i2s@14d60000 {
- compatible = "samsung,exynos7-i2s";
+ compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
reg = <0x14d60000 0x100>;
dmas = <&pdma0 31>, <&pdma0 30>;
dma-names = "tx", "rx";
};
pwm: pwm@14dd0000 {
- compatible = "samsung,exynos4210-pwm";
+ compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
reg = <0x14dd0000 0x100>;
interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
};
hsi2c_0: i2c@14e40000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14e40000 0x1000>;
interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_1: i2c@14e50000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14e50000 0x1000>;
interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_2: i2c@14e60000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14e60000 0x1000>;
interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_3: i2c@14e70000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14e70000 0x1000>;
interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_4: i2c@14ec0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14ec0000 0x1000>;
interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_5: i2c@14ed0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14ed0000 0x1000>;
interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_6: i2c@14ee0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14ee0000 0x1000>;
interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_7: i2c@14ef0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14ef0000 0x1000>;
interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_8: i2c@14d90000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14d90000 0x1000>;
interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_9: i2c@14da0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14da0000 0x1000>;
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_10: i2c@14de0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14de0000 0x1000>;
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_11: i2c@14df0000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "samsung,exynos5433-hsi2c",
+ "samsung,exynos7-hsi2c";
reg = <0x14df0000 0x1000>;
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
mshc_0: mmc@15540000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos5433-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
};
mshc_1: mmc@15550000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos5433-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
};
mshc_2: mmc@15560000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos5433-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
};
i2s0: i2s@11440000 {
- compatible = "samsung,exynos7-i2s";
+ compatible = "samsung,exynos5433-i2s",
+ "samsung,exynos7-i2s";
reg = <0x11440000 0x100>;
dmas = <&adma 0>, <&adma 2>;
dma-names = "tx", "rx";
ranges = <0 0 0 0x18000000>;
chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
+ compatible = "samsung,exynos7-chipid",
+ "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
};
};
serial_0: serial@13630000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
reg = <0x13630000 0x100>;
interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_UART0>,
};
serial_1: serial@14c20000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
reg = <0x14c20000 0x100>;
interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART1>,
};
serial_2: serial@14c30000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
reg = <0x14c30000 0x100>;
interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART2>,
};
serial_3: serial@14c40000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
reg = <0x14c40000 0x100>;
interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART3>,
};
rtc: rtc@10590000 {
- compatible = "samsung,s3c6410-rtc";
+ compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
reg = <0x10590000 0x100>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
};
gpu: gpu@14ac0000 {
- compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+ compatible = "samsung,exynos7-mali",
+ "samsung,exynos5433-mali", "arm,mali-t760";
reg = <0x14ac0000 0x5000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
};
pwm: pwm@136c0000 {
- compatible = "samsung,exynos4210-pwm";
+ compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
reg = <0x136c0000 0x100>;
interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
ranges = <0x0 0x0 0x0 0x20000000>;
chipid@10000000 {
- compatible = "samsung,exynos850-chipid";
+ compatible = "samsung,exynos7885-chipid",
+ "samsung,exynos850-chipid";
reg = <0x10000000 0x24>;
};
reg = <0x11cb0000 0x1000>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos7-wakeup-eint";
+ compatible = "samsung,exynos7885-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
};
};
pmu_system_controller: system-controller@11c80000 {
- compatible = "samsung,exynos7-pmu", "syscon";
+ compatible = "samsung,exynos7885-pmu",
+ "samsung,exynos7-pmu", "syscon";
reg = <0x11c80000 0x10000>;
};
mmc_0: mmc@13500000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos7885-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
reg = <0x13500000 0x2000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
serial_0: serial@13800000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13800000 0x100>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
};
serial_1: serial@13810000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13810000 0x100>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
};
serial_2: serial@13820000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13820000 0x100>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
};
i2c_0: i2c@13830000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13830000 0x100>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_1: i2c@13840000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13840000 0x100>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_2: i2c@13850000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13850000 0x100>;
interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_3: i2c@13860000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_4: i2c@13870000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_5: i2c@13880000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_6: i2c@13890000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_7: i2c@11cd0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x11cd0000 0x100>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
reg = <0x11850000 0x1000>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
+ compatible = "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
};
};
reg = <0x11c30000 0x1000>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos850-wakeup-eint";
+ compatible = "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
};
};
};
rtc: rtc@11a30000 {
- compatible = "samsung,s3c6410-rtc";
+ compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
reg = <0x11a30000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
};
mmc_0: mmc@12100000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos850-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
reg = <0x12100000 0x2000>;
interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_0: i2c@13830000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13830000 0x100>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_1: i2c@13840000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13840000 0x100>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_2: i2c@13850000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13850000 0x100>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_3: i2c@13860000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
i2c_4: i2c@13870000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
i2c_5: i2c@13880000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* I2C_6 (also called MOTOR_I2C in TRM) */
i2c_6: i2c@13890000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
hsi2c_0: i2c@138a0000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c",
+ "samsung,exynosautov9-hsi2c";
reg = <0x138a0000 0xc0>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
hsi2c_1: i2c@138b0000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c",
+ "samsung,exynosautov9-hsi2c";
reg = <0x138b0000 0xc0>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
hsi2c_2: i2c@138c0000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c",
+ "samsung,exynosautov9-hsi2c";
reg = <0x138c0000 0xc0>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
hsi2c_3: i2c@11d00000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c",
+ "samsung,exynosautov9-hsi2c";
reg = <0x11d00000 0xc0>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
status = "disabled";
hsi2c_4: i2c@11d20000 {
- compatible = "samsung,exynosautov9-hsi2c";
+ compatible = "samsung,exynos850-hsi2c",
+ "samsung,exynosautov9-hsi2c";
reg = <0x11d20000 0xc0>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/dts-v1/;
#include "exynosautov9.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Samsung ExynosAuto v9 SADK board";
<0xa 0x00000000 0x2 0x00000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+ key-wakeup {
+ label = "Wakeup";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
ufs_0_fixed_vcc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "ufs-vcc";
};
};
+&pinctrl_alive {
+ key_wakeup: key-wakeup-pins {
+ samsung,pins = "gpa0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
+&pinctrl_peric1 {
+ key_voldown: key-voldown-pins {
+ samsung,pins = "gpg2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ key_volup: key-volup-pins {
+ samsung,pins = "gpg1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_tout3>;
ranges = <0x0 0x0 0x0 0x20000000>;
chipid@10000000 {
- compatible = "samsung,exynos850-chipid";
+ compatible = "samsung,exynosautov9-chipid",
+ "samsung,exynos850-chipid";
reg = <0x10000000 0x24>;
};
reg = <0x10450000 0x1000>;
wakeup-interrupt-controller {
- compatible = "samsung,exynosautov9-wakeup-eint";
+ compatible = "samsung,exynosautov9-wakeup-eint",
+ "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
};
};
};
pmu_system_controller: system-controller@10460000 {
- compatible = "samsung,exynos7-pmu", "syscon";
+ compatible = "samsung,exynosautov9-pmu",
+ "samsung,exynos7-pmu", "syscon";
reg = <0x10460000 0x10000>;
reboot: syscon-reboot {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+ gpa0: gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa1: gpa1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpq0: gpq0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_aud {
+ gpb0: gpb0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb4: gpb4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb5: gpb5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb6: gpb6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_hsi0 {
+ gph0: gph0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_hsi1 {
+ gph8: gph8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_hsi2 {
+ gph3: gph3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph4: gph4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph5: gph5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph6: gph6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_hsi2ufs {
+ gph2: gph2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out-pins {
+ samsung,pins = "gph2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ ufs_rst_n: ufs-rst-n-pins {
+ samsung,pins = "gph2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ ufs_refclk_out_1: ufs-refclk-out-1-pins {
+ samsung,pins = "gph2-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ ufs_rst_n_1: ufs-rst-n-1-pins {
+ samsung,pins = "gph2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_peric0 {
+ gpg0: gpg0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg4: gpg4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg5: gpg5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp0: gpp0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp1: gpp1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp2: gpp2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp3: gpp3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp4: gpp4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* PWM PERIC0 */
+ pwm_tout0: pwm-tout0-pins {
+ samsung,pins = "gpg0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ pwm_tout1: pwm-tout1-pins {
+ samsung,pins = "gpg0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ pwm_tout2: pwm-tout2-pins {
+ samsung,pins = "gpg0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ pwm_tout3: pwm-tout3-pins {
+ samsung,pins = "gpg0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI00 */
+ uart0_bus: uart0-bus-pins {
+ samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart0_bus_dual: uart0-bus-dual-pins {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI01 */
+ uart1_bus: uart1-bus-pins {
+ samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart1_bus_dual: uart1-bus-dual-pins {
+ samsung,pins = "gpp0-4", "gpp0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI02 */
+ uart2_bus: uart2-bus-pins {
+ samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart2_bus_dual: uart2-bus-dual-pins {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI03 */
+ uart3_bus: uart3-bus-pins {
+ samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart3_bus_dual: uart3-bus-dual-pins {
+ samsung,pins = "gpp1-4", "gpp1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI04 */
+ uart4_bus: uart4-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart4_bus_dual: uart4-bus-dual-pins {
+ samsung,pins = "gpp2-0", "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI05 */
+ uart5_bus: uart5-bus-pins {
+ samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart5_bus_dual: uart5-bus-dual-pins {
+ samsung,pins = "gpp2-4", "gpp2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI06 */
+ uart6_bus: uart6-bus-pins {
+ samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart6_bus_dual: uart6-bus-dual-pins {
+ samsung,pins = "gpp3-0", "gpp3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI07 */
+ uart7_bus: uart7-bus-pins {
+ samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart7_bus_dual: uart7-bus-dual-pins {
+ samsung,pins = "gpp3-4", "gpp3-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC0_USI08 */
+ uart8_bus: uart8-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart8_bus_dual: uart8-bus-dual-pins {
+ samsung,pins = "gpp4-0", "gpp4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI00 */
+ hsi2c0_bus: hsi2c0-bus-pins {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI00_I2C */
+ hsi2c1_bus: hsi2c1-bus-pins {
+ samsung,pins = "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI01 */
+ hsi2c2_bus: hsi2c2-bus-pins {
+ samsung,pins = "gpp0-4", "gpp0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI01_I2C */
+ hsi2c3_bus: hsi2c3-bus-pins {
+ samsung,pins = "gpp0-6", "gpp0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI02 */
+ hsi2c4_bus: hsi2c4-bus-pins {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI02_I2C */
+ hsi2c5_bus: hsi2c5-bus-pins {
+ samsung,pins = "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI03 */
+ hsi2c6_bus: hsi2c6-bus-pins {
+ samsung,pins = "gpp1-4", "gpp1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI03_I2C */
+ hsi2c7_bus: hsi2c7-bus-pins {
+ samsung,pins = "gpp1-6", "gpp1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI04 */
+ hsi2c8_bus: hsi2c8-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI04_I2C */
+ hsi2c9_bus: hsi2c9-bus-pins {
+ samsung,pins = "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI05 */
+ hsi2c10_bus: hsi2c10-bus-pins {
+ samsung,pins = "gpp2-4", "gpp2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI05_I2C */
+ hsi2c11_bus: hsi2c11-bus-pins {
+ samsung,pins = "gpp2-6", "gpp2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI06 */
+ hsi2c12_bus: hsi2c12-bus-pins {
+ samsung,pins = "gpp3-0", "gpp3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI06_I2C */
+ hsi2c13_bus: hsi2c13-bus-pins {
+ samsung,pins = "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI07 */
+ hsi2c14_bus: hsi2c14-bus-pins {
+ samsung,pins = "gpp3-4", "gpp3-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI07_I2C */
+ hsi2c15_bus: hsi2c15-bus-pins {
+ samsung,pins = "gpp3-6", "gpp3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI08 */
+ hsi2c16_bus: hsi2c16-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC0 USI08_I2C */
+ hsi2c17_bus: hsi2c17-bus-pins {
+ samsung,pins = "gpp4-2", "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI00 */
+ spi0_bus: spi0-bus-pins {
+ samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi0_cs: spi0-cs-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi0_cs_func: spi0-cs-func-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI01 */
+ spi1_bus: spi1-bus-pins {
+ samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi1_cs: spi1-cs-pins {
+ samsung,pins = "gpp0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi1_cs_func: spi1-cs-func-pins {
+ samsung,pins = "gpp0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI02 */
+ spi2_bus: spi2-bus-pins {
+ samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi2_cs: spi2-cs-pins {
+ samsung,pins = "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi2_cs_func: spi2-cs-func-pins {
+ samsung,pins = "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI03 */
+ spi3_bus: spi3-bus-pins {
+ samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi3_cs: spi3-cs-pins {
+ samsung,pins = "gpp1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi3_cs_func: spi3-cs-func-pins {
+ samsung,pins = "gpp1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI04 */
+ spi4_bus: spi4-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi4_cs: spi4-cs-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi4_cs_func: spi4-cs-func-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI05 */
+ spi5_bus: spi5-bus-pins {
+ samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi5_cs: spi5-cs-pins {
+ samsung,pins = "gpp2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi5_cs_func: spi5-cs-func-pins {
+ samsung,pins = "gpp2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI06 */
+ spi6_bus: spi6-bus-pins {
+ samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi6_cs: spi6-cs-pins {
+ samsung,pins = "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi6_cs_func: spi6-cs-func-pins {
+ samsung,pins = "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI07 */
+ spi7_bus: spi7-bus-pins {
+ samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi7_cs: spi7-cs-pins {
+ samsung,pins = "gpp3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi7_cs_func: spi7-cs-func-pins {
+ samsung,pins = "gpp3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC0 USI08 */
+ spi8_bus: spi8-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi8_cs: spi8-cs-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi8_cs_func: spi8-cs-func-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I3C PERIC0 */
+ i3c0_bus: i3c0-bus-pins {
+ samsung,pins = "gpp2-6", "gpp2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c1_bus: i3c1-bus-pins {
+ samsung,pins = "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c2_bus: i3c2-bus-pins {
+ samsung,pins = "gpp3-6", "gpp3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c3_bus: i3c3-bus-pins {
+ samsung,pins = "gpp4-2", "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_peric1 {
+ gpg1: gpg1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp5: gpp5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp6: gpp6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp7: gpp7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp8: gpp8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp9: gpp9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp10: gpp10-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp11: gpp11-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp12: gpp12-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* UART PERIC1 USI09 */
+ uart9_bus: uart9-bus-pins {
+ samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart9_bus_dual: uart9-bus-dual-pins {
+ samsung,pins = "gpp5-0", "gpp5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI10 */
+ uart10_bus: uart10-bus-pins {
+ samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart10_bus_dual: uart10-bus-dual-pins {
+ samsung,pins = "gpp5-4", "gpp5-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI11 */
+ uart11_bus: uart11-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart11_bus_dual: uart11-bus-dual-pins {
+ samsung,pins = "gpp10-0", "gpp10-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1_USI12 */
+ uart12_bus: uart12-bus-pins {
+ samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart12_bus_dual: uart12-bus-dual-pins {
+ samsung,pins = "gpp7-0", "gpp7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1_USI13 */
+ uart13_bus: uart13-bus-pins {
+ samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart13_bus_dual: uart13-bus-dual-pins {
+ samsung,pins = "gpp7-4", "gpp7-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI14 */
+ uart14_bus: uart14-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart14_bus_dual: uart14-bus-dual-pins {
+ samsung,pins = "gpp8-0", "gpp8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI15 */
+ uart15_bus: uart15-bus-pins {
+ samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart15_bus_dual: uart15-bus-dual-pins {
+ samsung,pins = "gpp11-0", "gpp11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI16 */
+ uart16_bus: uart16-bus-pins {
+ samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart16_bus_dual: uart16-bus-dual-pins {
+ samsung,pins = "gpp9-0", "gpp9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* UART PERIC1 USI17 */
+ uart17_bus: uart17-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart17_bus_dual: uart17-bus-dual-pins {
+ samsung,pins = "gpp12-0", "gpp12-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI09 */
+ hsi2c18_bus: hsi2c18-bus-pins {
+ samsung,pins = "gpp5-0", "gpp5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI09_I2C */
+ hsi2c19_bus: hsi2c19-bus-pins {
+ samsung,pins = "gpp5-2", "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI10 */
+ hsi2c20_bus: hsi2c20-bus-pins {
+ samsung,pins = "gpp5-4", "gpp5-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI10_I2C */
+ hsi2c21_bus: hsi2c21-bus-pins {
+ samsung,pins = "gpp5-6", "gpp5-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI11 */
+ hsi2c22_bus: hsi2c22-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI11_I2C */
+ hsi2c23_bus: hsi2c23-bus-pins {
+ samsung,pins = "gpp10-2", "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI12 */
+ hsi2c24_bus: hsi2c24-bus-pins {
+ samsung,pins = "gpp7-0", "gpp7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI12_I2C */
+ hsi2c25_bus: hsi2c25-bus-pins {
+ samsung,pins = "gpp7-2", "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI13 */
+ hsi2c26_bus: hsi2c26-bus-pins {
+ samsung,pins = "gpp7-4", "gpp7-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI13_I2C */
+ hsi2c27_bus: hsi2c27-bus-pins {
+ samsung,pins = "gpp7-6", "gpp7-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI14 */
+ hsi2c28_bus: hsi2c28-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI14_I2C */
+ hsi2c29_bus: hsi2c29-bus-pins {
+ samsung,pins = "gpp8-2", "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI15 */
+ hsi2c30_bus: hsi2c30-bus-pins {
+ samsung,pins = "gpp11-0", "gpp11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI15_I2C */
+ hsi2c31_bus: hsi2c31-bus-pins {
+ samsung,pins = "gpp11-2", "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI16 */
+ hsi2c32_bus: hsi2c32-bus-pins {
+ samsung,pins = "gpp9-0", "gpp9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI16_I2C */
+ hsi2c33_bus: hsi2c33-bus-pins {
+ samsung,pins = "gpp9-2", "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI17 */
+ hsi2c34_bus: hsi2c34-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I2C PERIC1 USI17_I2C */
+ hsi2c35_bus: hsi2c35-bus-pins {
+ samsung,pins = "gpp12-2", "gpp12-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI09 */
+ spi9_bus: spi9-bus-pins {
+ samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi9_cs: spi9-cs-pins {
+ samsung,pins = "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi9_cs_func: spi9-cs-func-pins {
+ samsung,pins = "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI10 */
+ spi10_bus: spi10-bus-pins {
+ samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi10_cs: spi10-cs-pins {
+ samsung,pins = "gpp5-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi10_cs_func: spi10-cs-func-pins {
+ samsung,pins = "gpp5-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI11 */
+ spi11_bus: spi11-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi11_cs: spi11-cs-pins {
+ samsung,pins = "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi11_cs_func: spi11-cs-func-pins {
+ samsung,pins = "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI12 */
+ spi12_bus: spi12-bus-pins {
+ samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi12_cs: spi12-cs-pins {
+ samsung,pins = "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi12_cs_func: spi12-cs-func-pins {
+ samsung,pins = "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI13 */
+ spi13_bus: spi13-bus-pins {
+ samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi13_cs: spi13-cs-pins {
+ samsung,pins = "gpp7-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi13_cs_func: spi13-cs-func-pins {
+ samsung,pins = "gpp7-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI14 */
+ spi14_bus: spi14-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi14_cs: spi14-cs-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi14_cs_func: spi14-cs-func-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI15 */
+ spi15_bus: spi15-bus-pins {
+ samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi15_cs: spi15-cs-pins {
+ samsung,pins = "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi15_cs_func: spi15-cs-func-pins {
+ samsung,pins = "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI16 */
+ spi16_bus: spi16-bus-pins {
+ samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi16_cs: spi16-cs-pins {
+ samsung,pins = "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi16_cs_func: spi16-cs-func-pins {
+ samsung,pins = "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* SPI PERIC1 USI17 */
+ spi17_bus: spi17-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi17_cs: spi17-cs-pins {
+ samsung,pins = "gpp12-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi17_cs_func: spi17-cs-func-pins {
+ samsung,pins = "gpp12-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* I3C PERIC1 */
+ i3c4_bus: i3c4-bus-pins {
+ samsung,pins = "gpp7-2", "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c5_bus: i3c5-bus-pins {
+ samsung,pins = "gpp7-6", "gpp7-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c6_bus: i3c6-bus-pins {
+ samsung,pins = "gpp8-2", "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c7_bus: i3c7-bus-pins {
+ samsung,pins = "gpp11-2", "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung ExynosAutov920 SADK board";
+ compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial_0;
+ };
+
+ chosen {
+ stdout-path = &serial_0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_wakeup &key_back>;
+
+ key-wakeup {
+ label = "KEY_WAKEUP";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ key-back {
+ label = "KEY_BACK";
+ linux,code = <KEY_BACK>;
+ gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x70000000>,
+ <0x8 0x80000000 0x1 0xfba00000>,
+ <0xa 0x00000000 0x2 0x00000000>;
+ };
+};
+
+&pinctrl_alive {
+ key_wakeup: key-wakeup-pins {
+ samsung,pins = "gpa0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ };
+};
+
+&pinctrl_peric1 {
+ key_back: key-back-pins {
+ samsung,pins = "gpp6-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_tout0>;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&usi_0 {
+ samsung,clkreq-on; /* needed for UART mode */
+ status = "okay";
+};
+
+&xtcxo {
+ clock-frequency = <38400000>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+ compatible = "samsung,exynosautov920";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_aud;
+ pinctrl2 = &pinctrl_hsi0;
+ pinctrl3 = &pinctrl_hsi1;
+ pinctrl4 = &pinctrl_hsi2;
+ pinctrl5 = &pinctrl_hsi2ufs;
+ pinctrl6 = &pinctrl_peric0;
+ pinctrl7 = &pinctrl_peric1;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a78-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ xtcxo: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "oscclk";
+ };
+
+ /*
+ * FIXME: Keep the stub clock for serial driver, until proper clock
+ * driver is implemented.
+ */
+ clock_usi: clock-usi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "usi";
+ };
+
+ cpus: cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@10000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x10000>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@10100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x10100>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@10200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x10200>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@10300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x10300>;
+ enable-method = "psci";
+ };
+
+ cpu8: cpu@20000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x20000>;
+ enable-method = "psci";
+ };
+
+ cpu9: cpu@20100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78ae";
+ reg = <0x0 0x20100>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x20000000>;
+
+ chipid@10000000 {
+ compatible = "samsung,exynosautov920-chipid",
+ "samsung,exynos850-chipid";
+ reg = <0x10000000 0x24>;
+ };
+
+ gic: interrupt-controller@10400000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x10400000 0x10000>,
+ <0x10460000 0x140000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscon_peric0: syscon@10820000 {
+ compatible = "samsung,exynosautov920-peric0-sysreg",
+ "syscon";
+ reg = <0x10820000 0x2000>;
+ };
+
+ pinctrl_peric0: pinctrl@10830000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x10830000 0x10000>;
+ interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usi_0: usi@108800c0 {
+ compatible = "samsung,exynosautov920-usi",
+ "samsung,exynos850-usi";
+ reg = <0x108800c0 0x20>;
+ samsung,sysreg = <&syscon_peric0 0x1000>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&clock_usi>, <&clock_usi>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_0: serial@10880000 {
+ compatible = "samsung,exynosautov920-uart",
+ "samsung,exynos850-uart";
+ reg = <0x10880000 0xc0>;
+ interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ clocks = <&clock_usi>, <&clock_usi>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+ };
+
+ pwm: pwm@109b0000 {
+ compatible = "samsung,exynosautov920-pwm",
+ "samsung,exynos4210-pwm";
+ reg = <0x109b0000 0x100>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ #pwm-cells = <3>;
+ clocks = <&xtcxo>;
+ clock-names = "timers";
+ status = "disabled";
+ };
+
+ syscon_peric1: syscon@10c20000 {
+ compatible = "samsung,exynosautov920-peric1-sysreg",
+ "syscon";
+ reg = <0x10c20000 0x2000>;
+ };
+
+ pinctrl_peric1: pinctrl@10c30000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x10c30000 0x10000>;
+ interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_alive: pinctrl@11850000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x11850000 0x10000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynosautov920-wakeup-eint";
+ };
+ };
+
+ pmu_system_controller: system-controller@11860000 {
+ compatible = "samsung,exynosautov920-pmu",
+ "samsung,exynos7-pmu","syscon";
+ reg = <0x11860000 0x10000>;
+ };
+
+ pinctrl_hsi0: pinctrl@16040000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x16040000 0x10000>;
+ interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_hsi1: pinctrl@16450000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x16450000 0x10000>;
+ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_hsi2: pinctrl@16c10000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x16c10000 0x10000>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_hsi2ufs: pinctrl@16d20000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x16d20000 0x10000>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_aud: pinctrl@1a460000 {
+ compatible = "samsung,exynosautov920-pinctrl";
+ reg = <0x1a460000 0x10000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "exynosautov920-pinctrl.dtsi"
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+ model = "Oriole";
+ compatible = "google,gs101-oriole", "google,gs101";
+
+ aliases {
+ serial0 = &serial_0;
+ };
+
+ chosen {
+ /* Bootloader expects bootargs specified otherwise it crashes */
+ bootargs = "";
+ stdout-path = &serial_0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+
+ button-vol-down {
+ label = "KEY_VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-vol-up {
+ label = "KEY_VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-power {
+ label = "KEY_POWER";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+};
+
+&ext_24_5m {
+ clock-frequency = <24576000>;
+};
+
+&ext_200m {
+ clock-frequency = <200000000>;
+};
+
+&pinctrl_far_alive {
+ key_voldown: key-voldown-pins {
+ samsung,pins = "gpa7-3";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ key_volup: key-volup-pins {
+ samsung,pins = "gpa8-1";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+};
+
+&pinctrl_gpio_alive {
+ key_power: key-power-pins {
+ samsung,pins = "gpa10-1";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+};
+
+&serial_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ status = "okay";
+};
+
+&usi_uart {
+ samsung,clkreq-on; /* needed for UART mode */
+ status = "okay";
+};
+
+&watchdog_cl0 {
+ timeout-sec = <30>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+ gpa0: gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa1: gpa1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa2: gpa2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa3: gpa3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa4: gpa4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa5: gpa5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa9: gpa9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa10: gpa10-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ uart15_bus: uart15-bus-pins {
+ samsung,pins = "gpa2-3", "gpa2-4";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ uart16_bus: uart16-bus-pins {
+ samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ uart17_bus: uart17-bus-pins {
+ samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi15_bus: spi15-bus-pins {
+ samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi15_cs: spi15-cs-pins {
+ samsung,pins = "gpa4-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+};
+
+&pinctrl_far_alive {
+ gpa6: gpa6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa7: gpa7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa8: gpa8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa11: gpa11-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+};
+
+&pinctrl_gsacore {
+ gps0: gps0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gps1: gps1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gps2: gps2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_gsactrl {
+ gps3: gps3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_hsi1 {
+ gph0: gph0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcie0_clkreq: pcie0-clkreq-pins{
+ samsung,pins = "gph0-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+ };
+
+ pcie0_perst: pcie0-perst-pins {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ };
+};
+
+&pinctrl_hsi2 {
+ gph2: gph2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph3: gph3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph4: gph4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd2_clk: sd2-clk-pins {
+ samsung,pins = "gph4-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+ };
+
+ sd2_cmd: sd2-cmd-pins {
+ samsung,pins = "gph4-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+ };
+
+ sd2_bus1: sd2-bus-width1-pins {
+ samsung,pins = "gph4-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+ };
+
+ sd2_bus4: sd2-bus-width4-pins {
+ samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+ };
+
+ sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+ samsung,pins = "gph4-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+ samsung,pins = "gph4-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+ samsung,pins = "gph4-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+ };
+
+ sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+ samsung,pins = "gph4-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+ };
+
+ ufs_rst_n: ufs-rst-n-pins {
+ samsung,pins = "gph3-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out-pins {
+ samsung,pins = "gph3-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+ };
+
+ pcie1_clkreq: pcie1-clkreq-pins {
+ samsung,pins = "gph2-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+ };
+
+ pcie1_perst: pcie1-perst-pins {
+ samsung,pins = "gph2-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ };
+};
+
+&pinctrl_peric0 {
+ gpp0: gpp0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp1: gpp1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp2: gpp2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp3: gpp3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp4: gpp4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp5: gpp5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp6: gpp6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp7: gpp7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp8: gpp8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp9: gpp9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp10: gpp10-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp11: gpp11-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp12: gpp12-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp13: gpp13-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp14: gpp14-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp15: gpp15-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp16: gpp16-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp17: gpp17-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp18: gpp18-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp19: gpp19-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* USI_PERIC0_UART_DBG */
+ uart0_bus: uart0-bus-pins {
+ samsung,pins = "gpp1-2", "gpp1-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ disp_te_pri_on: disp-te-pri-on-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ };
+
+ disp_te_pri_off: disp-te-pri-off-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+ };
+
+ disp_te_sec_on: disp-te-sec-on-pins {
+ samsung,pins = "gpp0-4";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ };
+
+ disp_te_sec_off: disp-te-sec-off-pins {
+ samsung,pins = "gpp0-4";
+ samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+ };
+
+ sensor_mclk1_out: sensor-mclk1-out-pins {
+ samsung,pins = "gpp3-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk1_fn: sensor-mclk1-fn-pins {
+ samsung,pins = "gpp3-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk2_out: sensor-mclk2-out-pins {
+ samsung,pins = "gpp5-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk2_fn: sensor-mclk2-fn-pins {
+ samsung,pins = "gpp5-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk3_out: sensor-mclk3-out-pins {
+ samsung,pins = "gpp7-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk3_fn: sensor-mclk3-fn-pins {
+ samsung,pins = "gpp7-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk4_out: sensor-mclk4-out-pins {
+ samsung,pins = "gpp9-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk4_fn: sensor-mclk4-fn-pins {
+ samsung,pins = "gpp9-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk5_out: sensor-mclk5-out-pins {
+ samsung,pins = "gpp11-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk5_fn: sensor-mclk5-fn-pins {
+ samsung,pins = "gpp11-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk6_out: sensor-mclk6-out-pins {
+ samsung,pins = "gpp13-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk6_fn: sensor-mclk6-fn-pins {
+ samsung,pins = "gpp13-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk7_out: sensor-mclk7-out-pins {
+ samsung,pins = "gpp15-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk7_fn: sensor-mclk7-fn-pins {
+ samsung,pins = "gpp15-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk8_out: sensor-mclk8-out-pins {
+ samsung,pins = "gpp17-0";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ sensor_mclk8_fn: sensor-mclk8-fn-pins {
+ samsung,pins = "gpp17-0";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+ };
+
+ hsi2c14_bus: hsi2c14-bus-pins {
+ samsung,pins = "gpp18-0", "gpp18-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart14_bus_single: uart14-bus-pins {
+ samsung,pins = "gpp18-0", "gpp18-1",
+ "gpp18-2", "gpp18-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi14_bus: spi14-bus-pins {
+ samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi14_cs: spi14-cs-pins {
+ samsung,pins = "gpp18-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi14_cs_func: spi14-cs-func-pins {
+ samsung,pins = "gpp18-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c8_bus: hsi2c8-bus-pins {
+ samsung,pins = "gpp16-0", "gpp16-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+ };
+
+ uart8_bus_single: uart8-bus-pins {
+ samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+ "gpp16-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi8_bus: spi8-bus-pins {
+ samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi8_cs: spi8-cs-pins {
+ samsung,pins = "gpp16-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi8_cs_func: spi8-cs-func-pins {
+ samsung,pins = "gpp16-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c7_bus: hsi2c7-bus-pins {
+ samsung,pins = "gpp14-0", "gpp14-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart7_bus_single: uart7-bus-pins {
+ samsung,pins = "gpp14-0", "gpp14-1",
+ "gpp14-2", "gpp14-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi7_bus: spi7-bus-pins {
+ samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi7_cs: spi7-cs-pins {
+ samsung,pins = "gpp14-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi7_cs_func: spi7-cs-func-pins {
+ samsung,pins = "gpp14-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c6_bus: hsi2c6-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart6_bus_single: uart6-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1",
+ "gpp12-2", "gpp12-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi6_bus: spi6-bus-pins {
+ samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi6_cs: spi6-cs-pins {
+ samsung,pins = "gpp12-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi6_cs_func: spi6-cs-func-pins {
+ samsung,pins = "gpp12-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c5_bus: hsi2c5-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart5_bus_single: uart5-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1",
+ "gpp10-2", "gpp10-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi5_bus: spi5-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi5_cs_func: spi5-cs-func-pins {
+ samsung,pins = "gpp10-3";
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+ };
+
+ hsi2c4_bus: hsi2c4-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart4_bus_single: uart4-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1",
+ "gpp8-2", "gpp8-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi4_bus: spi4-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi4_cs: spi4-cs-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi4_cs_func: spi4-cs-func-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c3_bus: hsi2c3-bus-pins {
+ samsung,pins = "gpp6-0", "gpp6-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart3_bus_single: uart3-bus-pins {
+ samsung,pins = "gpp6-0", "gpp6-1",
+ "gpp6-2", "gpp6-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi3_bus: spi3-bus-pins {
+ samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi3_cs: spi3-cs-pins {
+ samsung,pins = "gpp6-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi3_cs_func: spi3-cs-func-pins {
+ samsung,pins = "gpp6-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c2_bus: hsi2c2-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart2_bus_single: uart2-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1",
+ "gpp4-2", "gpp4-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi2_bus: spi2-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi2_cs: spi2-cs-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi2_cs_func: spi2-cs-func-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c1_bus: hsi2c1-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart1_bus_single: uart1-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1",
+ "gpp2-2", "gpp2-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi1_bus: spi1-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi1_cs: spi1-cs-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi1_cs_func: spi1-cs-func-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+};
+
+&pinctrl_peric1 {
+ gpp20: gpp20-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp21: gpp21-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp22: gpp22-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp23: gpp23-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp24: gpp24-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp25: gpp25-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp26: gpp26-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp27: gpp27-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hsi2c13_bus: hsi2c13-bus-pins {
+ samsung,pins = "gpp25-0", "gpp25-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart13_bus_single: uart13-bus-pins {
+ samsung,pins = "gpp25-0", "gpp25-1",
+ "gpp25-2", "gpp25-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi13_bus: spi13-bus-pins {
+ samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi13_cs: spi13-cs-pins {
+ samsung,pins = "gpp25-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi13_cs_func: spi13-cs-func-pins {
+ samsung,pins = "gpp25-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c12_bus: hsi2c12-bus-pins {
+ samsung,pins = "gpp23-4", "gpp23-5";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart12_bus_single: uart12-bus-pins {
+ samsung,pins = "gpp23-4", "gpp23-5",
+ "gpp23-6", "gpp23-7";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi12_bus: spi12-bus-pins {
+ samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi14_cs2: spi14-cs2-pins {
+ samsung,pins = "gpp23-6";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi12_cs: spi12-cs-pins {
+ samsung,pins = "gpp23-7";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi12_cs_func: spi12-cs-func-pins {
+ samsung,pins = "gpp23-7";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c11_bus: hsi2c11-bus-pins {
+ samsung,pins = "gpp23-0", "gpp23-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart11_bus_single: uart11-bus-pins {
+ samsung,pins = "gpp23-0", "gpp23-1",
+ "gpp23-2", "gpp23-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi11_bus: spi11-bus-pins {
+ samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi11_cs: spi11-cs-pins {
+ samsung,pins = "gpp23-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi11_cs_func: spi11-cs-func-pins {
+ samsung,pins = "gpp23-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c10_bus: hsi2c10-bus-pins {
+ samsung,pins = "gpp21-0", "gpp21-1";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart10_bus_single: uart10-bus-pins {
+ samsung,pins = "gpp21-0", "gpp21-1",
+ "gpp21-2", "gpp21-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi10_bus: spi10-bus-pins {
+ samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi10_cs: spi10-cs-pins {
+ samsung,pins = "gpp21-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi10_cs_func: spi10-cs-func-pins {
+ samsung,pins = "gpp21-3";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c9_bus: hsi2c9-bus-pins {
+ samsung,pins = "gpp20-4", "gpp20-5";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart9_bus_single: uart9-bus-pins {
+ samsung,pins = "gpp20-4", "gpp20-5",
+ "gpp20-6", "gpp20-7";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi9_bus: spi9-bus-pins {
+ samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi9_cs: spi9-cs-pins {
+ samsung,pins = "gpp20-7";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi9_cs_func: spi9-cs-func-pins {
+ samsung,pins = "gpp20-7";
+ samsung,pin-function = <GS101_PIN_FUNC_2>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ hsi2c0_bus: hsi2c0-bus-pins {
+ samsung,pins = "gpp20-0", "gpp20-1";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ uart0_bus_single: uart0-bus-pins {
+ samsung,pins = "gpp20-0", "gpp20-1",
+ "gpp20-2", "gpp20-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
+ spi0_bus: spi0-bus-pins {
+ samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi0_cs: spi0-cs-pins {
+ samsung,pins = "gpp20-3";
+ samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+
+ spi0_cs_func: spi0-cs-func-pins {
+ samsung,pins = "gpp20-3";
+ samsung,pin-function = <GS101_PIN_FUNC_3>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
+};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE 0
+#define GS101_PIN_PULL_DOWN 1
+#define GS101_PIN_PULL_UP 3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0 0
+#define GS101_PIN_PDN_OUT1 1
+#define GS101_PIN_PDN_INPUT 2
+#define GS101_PIN_PDN_PREV 3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA 0
+#define GS101_PIN_DRV_5_MA 1
+#define GS101_PIN_DRV_7_5_MA 2
+#define GS101_PIN_DRV_10_MA 3
+
+#define GS101_PIN_FUNC_INPUT 0
+#define GS101_PIN_FUNC_OUTPUT 1
+#define GS101_PIN_FUNC_2 2
+#define GS101_PIN_FUNC_3 3
+#define GS101_PIN_FUNC_EINT 0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+ compatible = "google,gs101";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_gpio_alive;
+ pinctrl1 = &pinctrl_far_alive;
+ pinctrl2 = &pinctrl_gsacore;
+ pinctrl3 = &pinctrl_gsactrl;
+ pinctrl4 = &pinctrl_peric0;
+ pinctrl5 = &pinctrl_peric1;
+ pinctrl6 = &pinctrl_hsi1;
+ pinctrl7 = &pinctrl_hsi2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu6>;
+ };
+ core1 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0000>;
+ enable-method = "psci";
+ cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+ capacity-dmips-mhz = <250>;
+ dynamic-power-coefficient = <70>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0100>;
+ enable-method = "psci";
+ cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+ capacity-dmips-mhz = <250>;
+ dynamic-power-coefficient = <70>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0200>;
+ enable-method = "psci";
+ cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+ capacity-dmips-mhz = <250>;
+ dynamic-power-coefficient = <70>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0300>;
+ enable-method = "psci";
+ cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+ capacity-dmips-mhz = <250>;
+ dynamic-power-coefficient = <70>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0400>;
+ enable-method = "psci";
+ cpu-idle-states = <&ENYO_CPU_SLEEP>;
+ capacity-dmips-mhz = <620>;
+ dynamic-power-coefficient = <284>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0500>;
+ enable-method = "psci";
+ cpu-idle-states = <&ENYO_CPU_SLEEP>;
+ capacity-dmips-mhz = <620>;
+ dynamic-power-coefficient = <284>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-x1";
+ reg = <0x0600>;
+ enable-method = "psci";
+ cpu-idle-states = <&HERA_CPU_SLEEP>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <650>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-x1";
+ reg = <0x0700>;
+ enable-method = "psci";
+ cpu-idle-states = <&HERA_CPU_SLEEP>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <650>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+ idle-state-name = "c2";
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <70>;
+ exit-latency-us = <160>;
+ min-residency-us = <2000>;
+ };
+
+ ENYO_CPU_SLEEP: cpu-enyo-sleep {
+ idle-state-name = "c2";
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <150>;
+ exit-latency-us = <190>;
+ min-residency-us = <2500>;
+ };
+
+ HERA_CPU_SLEEP: cpu-hera-sleep {
+ idle-state-name = "c2";
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <235>;
+ exit-latency-us = <220>;
+ min-residency-us = <3500>;
+ };
+ };
+ };
+
+ /* TODO replace with CCF clock */
+ dummy_clk: clock-3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12345>;
+ clock-output-names = "pclk";
+ };
+
+ /* ect node is required to be present by bootloader */
+ ect {
+ };
+
+ ext_24_5m: clock-1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "oscclk";
+ };
+
+ ext_200m: clock-2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ext-200m";
+ };
+
+ pmu-0 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-1 {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ pmu-2 {
+ compatible = "arm,cortex-x1-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+ };
+
+ pmu-3 {
+ compatible = "arm,dsu-pmu";
+ interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ gsa_reserved_protected: gsa@90200000 {
+ reg = <0x0 0x90200000 0x400000>;
+ no-map;
+ };
+
+ tpu_fw_reserved: tpu-fw@93000000 {
+ reg = <0x0 0x93000000 0x1000000>;
+ no-map;
+ };
+
+ aoc_reserve: aoc@94000000 {
+ reg = <0x0 0x94000000 0x03000000>;
+ no-map;
+ };
+
+ abl_reserved: abl@f8800000 {
+ reg = <0x0 0xf8800000 0x02000000>;
+ no-map;
+ };
+
+ dss_log_reserved: dss-log-reserved@fd3f0000 {
+ reg = <0x0 0xfd3f0000 0x0000e000>;
+ no-map;
+ };
+
+ debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+ reg = <0x0 0xfd3fe000 0x00001000>;
+ no-map;
+ };
+
+ bldr_log_reserved: bldr-log-reserved@fd800000 {
+ reg = <0x0 0xfd800000 0x00100000>;
+ no-map;
+ };
+
+ bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+ reg = <0x0 0xfd900000 0x00002000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
+
+ cmu_misc: clock-controller@10010000 {
+ compatible = "google,gs101-cmu-misc";
+ reg = <0x10010000 0x8000>;
+ #clock-cells = <1>;
+ clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+ <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+ clock-names = "bus", "sss";
+ };
+
+ watchdog_cl0: watchdog@10060000 {
+ compatible = "google,gs101-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+ <&ext_24_5m>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <0>;
+ status = "disabled";
+ };
+
+ watchdog_cl1: watchdog@10070000 {
+ compatible = "google,gs101-wdt";
+ reg = <0x10070000 0x100>;
+ interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+ <&ext_24_5m>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <1>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@10400000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ reg = <0x10400000 0x10000>, /* GICD */
+ <0x10440000 0x100000>;/* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5>;
+ };
+
+ ppi_cluster2: interrupt-partition-2 {
+ affinity = <&cpu6 &cpu7>;
+ };
+ };
+ };
+
+ sysreg_peric0: syscon@10820000 {
+ compatible = "google,gs101-peric0-sysreg", "syscon";
+ reg = <0x10820000 0x10000>;
+ };
+
+ pinctrl_peric0: pinctrl@10840000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x10840000 0x00001000>;
+ interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ usi_uart: usi@10a000c0 {
+ compatible = "google,gs101-usi",
+ "samsung,exynos850-usi";
+ reg = <0x10a000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&dummy_clk>, <&dummy_clk>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&sysreg_peric0 0x1020>;
+ samsung,mode = <USI_V2_UART>;
+ status = "disabled";
+
+ serial_0: serial@10a00000 {
+ compatible = "google,gs101-uart";
+ reg = <0x10a00000 0xc0>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 634
+ IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+ clock-names = "uart", "clk_uart_baud0";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+ };
+
+ sysreg_peric1: syscon@10c20000 {
+ compatible = "google,gs101-peric1-sysreg", "syscon";
+ reg = <0x10c20000 0x10000>;
+ };
+
+ pinctrl_peric1: pinctrl@10c40000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x10c40000 0x00001000>;
+ interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ pinctrl_hsi1: pinctrl@11840000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x11840000 0x00001000>;
+ interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ pinctrl_hsi2: pinctrl@14440000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x14440000 0x00001000>;
+ interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ cmu_apm: clock-controller@17400000 {
+ compatible = "google,gs101-cmu-apm";
+ reg = <0x17400000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&ext_24_5m>;
+ clock-names = "oscclk";
+ };
+
+ sysreg_apm: syscon@174204e0 {
+ compatible = "google,gs101-apm-sysreg", "syscon";
+ reg = <0x174204e0 0x1000>;
+ };
+
+ pmu_system_controller: system-controller@17460000 {
+ compatible = "google,gs101-pmu", "syscon";
+ reg = <0x17460000 0x10000>;
+ };
+
+ pinctrl_gpio_alive: pinctrl@174d0000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x174d0000 0x00001000>;
+
+ wakeup-interrupt-controller {
+ compatible = "google,gs101-wakeup-eint",
+ "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_far_alive: pinctrl@174e0000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x174e0000 0x00001000>;
+
+ wakeup-interrupt-controller {
+ compatible = "google,gs101-wakeup-eint",
+ "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_gsactrl: pinctrl@17940000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x17940000 0x00001000>;
+ };
+
+ pinctrl_gsacore: pinctrl@17a80000 {
+ compatible = "google,gs101-pinctrl";
+ reg = <0x17a80000 0x00001000>;
+ };
+
+ cmu_top: clock-controller@1e080000 {
+ compatible = "google,gs101-cmu-top";
+ reg = <0x1e080000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&ext_24_5m>;
+ clock-names = "oscclk";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts =
+ <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+ };
+};
+
+#include "gs101-pinctrl.dtsi"
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
- fsl,tmu-calibration = <0x00000000 0x00000025
- 0x00000001 0x0000002c
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004c
- 0x00000007 0x00000053
- 0x00000008 0x00000059
- 0x00000009 0x0000005f
- 0x0000000a 0x00000066
- 0x0000000b 0x0000006c
-
- 0x00010000 0x00000026
- 0x00010001 0x0000002d
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004d
- 0x00010006 0x00000055
- 0x00010007 0x0000005d
- 0x00010008 0x00000065
- 0x00010009 0x0000006d
-
- 0x00020000 0x00000026
- 0x00020001 0x00000030
- 0x00020002 0x0000003a
- 0x00020003 0x00000044
- 0x00020004 0x0000004e
- 0x00020005 0x00000059
- 0x00020006 0x00000063
-
- 0x00030000 0x00000014
- 0x00030001 0x00000021
- 0x00030002 0x0000002e
- 0x00030003 0x0000003a
- 0x00030004 0x00000047
- 0x00030005 0x00000053
- 0x00030006 0x00000060>;
- big-endian;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000025>,
+ <0x00000001 0x0000002c>,
+ <0x00000002 0x00000032>,
+ <0x00000003 0x00000039>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000046>,
+ <0x00000006 0x0000004c>,
+ <0x00000007 0x00000053>,
+ <0x00000008 0x00000059>,
+ <0x00000009 0x0000005f>,
+ <0x0000000a 0x00000066>,
+ <0x0000000b 0x0000006c>,
+
+ <0x00010000 0x00000026>,
+ <0x00010001 0x0000002d>,
+ <0x00010002 0x00000035>,
+ <0x00010003 0x0000003d>,
+ <0x00010004 0x00000045>,
+ <0x00010005 0x0000004d>,
+ <0x00010006 0x00000055>,
+ <0x00010007 0x0000005d>,
+ <0x00010008 0x00000065>,
+ <0x00010009 0x0000006d>,
+
+ <0x00020000 0x00000026>,
+ <0x00020001 0x00000030>,
+ <0x00020002 0x0000003a>,
+ <0x00020003 0x00000044>,
+ <0x00020004 0x0000004e>,
+ <0x00020005 0x00000059>,
+ <0x00020006 0x00000063>,
+
+ <0x00030000 0x00000014>,
+ <0x00030001 0x00000021>,
+ <0x00030002 0x0000002e>,
+ <0x00030003 0x0000003a>,
+ <0x00030004 0x00000047>,
+ <0x00030005 0x00000053>,
+ <0x00030006 0x00000060>;
#thermal-sensor-cells = <1>;
};
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
- fsl,tmu-calibration = <0x00000000 0x00000024
- 0x00000001 0x0000002b
- 0x00000002 0x00000031
- 0x00000003 0x00000038
- 0x00000004 0x0000003f
- 0x00000005 0x00000045
- 0x00000006 0x0000004c
- 0x00000007 0x00000053
- 0x00000008 0x00000059
- 0x00000009 0x00000060
- 0x0000000a 0x00000066
- 0x0000000b 0x0000006d
-
- 0x00010000 0x0000001c
- 0x00010001 0x00000024
- 0x00010002 0x0000002c
- 0x00010003 0x00000035
- 0x00010004 0x0000003d
- 0x00010005 0x00000045
- 0x00010006 0x0000004d
- 0x00010007 0x00000055
- 0x00010008 0x0000005e
- 0x00010009 0x00000066
- 0x0001000a 0x0000006e
-
- 0x00020000 0x00000018
- 0x00020001 0x00000022
- 0x00020002 0x0000002d
- 0x00020003 0x00000038
- 0x00020004 0x00000043
- 0x00020005 0x0000004d
- 0x00020006 0x00000058
- 0x00020007 0x00000063
- 0x00020008 0x0000006e
-
- 0x00030000 0x00000010
- 0x00030001 0x0000001c
- 0x00030002 0x00000029
- 0x00030003 0x00000036
- 0x00030004 0x00000042
- 0x00030005 0x0000004f
- 0x00030006 0x0000005b
- 0x00030007 0x00000068>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000024>,
+ <0x00000001 0x0000002b>,
+ <0x00000002 0x00000031>,
+ <0x00000003 0x00000038>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000045>,
+ <0x00000006 0x0000004c>,
+ <0x00000007 0x00000053>,
+ <0x00000008 0x00000059>,
+ <0x00000009 0x00000060>,
+ <0x0000000a 0x00000066>,
+ <0x0000000b 0x0000006d>,
+
+ <0x00010000 0x0000001c>,
+ <0x00010001 0x00000024>,
+ <0x00010002 0x0000002c>,
+ <0x00010003 0x00000035>,
+ <0x00010004 0x0000003d>,
+ <0x00010005 0x00000045>,
+ <0x00010006 0x0000004d>,
+ <0x00010007 0x00000055>,
+ <0x00010008 0x0000005e>,
+ <0x00010009 0x00000066>,
+ <0x0001000a 0x0000006e>,
+
+ <0x00020000 0x00000018>,
+ <0x00020001 0x00000022>,
+ <0x00020002 0x0000002d>,
+ <0x00020003 0x00000038>,
+ <0x00020004 0x00000043>,
+ <0x00020005 0x0000004d>,
+ <0x00020006 0x00000058>,
+ <0x00020007 0x00000063>,
+ <0x00020008 0x0000006e>,
+
+ <0x00030000 0x00000010>,
+ <0x00030001 0x0000001c>,
+ <0x00030002 0x00000029>,
+ <0x00030003 0x00000036>,
+ <0x00030004 0x00000042>,
+ <0x00030005 0x0000004f>,
+ <0x00030006 0x0000005b>,
+ <0x00030007 0x00000068>;
little-endian;
#thermal-sensor-cells = <1>;
};
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
- fsl,tmu-calibration = <0x00000000 0x00000023
- 0x00000001 0x0000002a
- 0x00000002 0x00000031
- 0x00000003 0x00000037
- 0x00000004 0x0000003e
- 0x00000005 0x00000044
- 0x00000006 0x0000004b
- 0x00000007 0x00000051
- 0x00000008 0x00000058
- 0x00000009 0x0000005e
- 0x0000000a 0x00000065
- 0x0000000b 0x0000006b
-
- 0x00010000 0x00000023
- 0x00010001 0x0000002b
- 0x00010002 0x00000033
- 0x00010003 0x0000003b
- 0x00010004 0x00000043
- 0x00010005 0x0000004b
- 0x00010006 0x00000054
- 0x00010007 0x0000005c
- 0x00010008 0x00000064
- 0x00010009 0x0000006c
-
- 0x00020000 0x00000021
- 0x00020001 0x0000002c
- 0x00020002 0x00000036
- 0x00020003 0x00000040
- 0x00020004 0x0000004b
- 0x00020005 0x00000055
- 0x00020006 0x0000005f
-
- 0x00030000 0x00000013
- 0x00030001 0x0000001d
- 0x00030002 0x00000028
- 0x00030003 0x00000032
- 0x00030004 0x0000003d
- 0x00030005 0x00000047
- 0x00030006 0x00000052
- 0x00030007 0x0000005c>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000023>,
+ <0x00000001 0x0000002a>,
+ <0x00000002 0x00000031>,
+ <0x00000003 0x00000037>,
+ <0x00000004 0x0000003e>,
+ <0x00000005 0x00000044>,
+ <0x00000006 0x0000004b>,
+ <0x00000007 0x00000051>,
+ <0x00000008 0x00000058>,
+ <0x00000009 0x0000005e>,
+ <0x0000000a 0x00000065>,
+ <0x0000000b 0x0000006b>,
+
+ <0x00010000 0x00000023>,
+ <0x00010001 0x0000002b>,
+ <0x00010002 0x00000033>,
+ <0x00010003 0x0000003b>,
+ <0x00010004 0x00000043>,
+ <0x00010005 0x0000004b>,
+ <0x00010006 0x00000054>,
+ <0x00010007 0x0000005c>,
+ <0x00010008 0x00000064>,
+ <0x00010009 0x0000006c>,
+
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002c>,
+ <0x00020002 0x00000036>,
+ <0x00020003 0x00000040>,
+ <0x00020004 0x0000004b>,
+ <0x00020005 0x00000055>,
+ <0x00020006 0x0000005f>,
+
+ <0x00030000 0x00000013>,
+ <0x00030001 0x0000001d>,
+ <0x00030002 0x00000028>,
+ <0x00030003 0x00000032>,
+ <0x00030004 0x0000003d>,
+ <0x00030005 0x00000047>,
+ <0x00030006 0x00000052>,
+ <0x00030007 0x0000005c>;
#thermal-sensor-cells = <1>;
};
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000023
- 0x00000001 0x00000029
- 0x00000002 0x0000002f
- 0x00000003 0x00000036
- 0x00000004 0x0000003c
- 0x00000005 0x00000042
- 0x00000006 0x00000049
- 0x00000007 0x0000004f
- 0x00000008 0x00000055
- 0x00000009 0x0000005c
- 0x0000000a 0x00000062
- 0x0000000b 0x00000068
+ <0x00000000 0x00000023>,
+ <0x00000001 0x00000029>,
+ <0x00000002 0x0000002f>,
+ <0x00000003 0x00000036>,
+ <0x00000004 0x0000003c>,
+ <0x00000005 0x00000042>,
+ <0x00000006 0x00000049>,
+ <0x00000007 0x0000004f>,
+ <0x00000008 0x00000055>,
+ <0x00000009 0x0000005c>,
+ <0x0000000a 0x00000062>,
+ <0x0000000b 0x00000068>,
/* Calibration data group 2 */
- 0x00010000 0x00000022
- 0x00010001 0x0000002a
- 0x00010002 0x00000032
- 0x00010003 0x0000003a
- 0x00010004 0x00000042
- 0x00010005 0x0000004a
- 0x00010006 0x00000052
- 0x00010007 0x0000005a
- 0x00010008 0x00000062
- 0x00010009 0x0000006a
+ <0x00010000 0x00000022>,
+ <0x00010001 0x0000002a>,
+ <0x00010002 0x00000032>,
+ <0x00010003 0x0000003a>,
+ <0x00010004 0x00000042>,
+ <0x00010005 0x0000004a>,
+ <0x00010006 0x00000052>,
+ <0x00010007 0x0000005a>,
+ <0x00010008 0x00000062>,
+ <0x00010009 0x0000006a>,
/* Calibration data group 3 */
- 0x00020000 0x00000021
- 0x00020001 0x0000002b
- 0x00020002 0x00000035
- 0x00020003 0x0000003e
- 0x00020004 0x00000048
- 0x00020005 0x00000052
- 0x00020006 0x0000005c
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002b>,
+ <0x00020002 0x00000035>,
+ <0x00020003 0x0000003e>,
+ <0x00020004 0x00000048>,
+ <0x00020005 0x00000052>,
+ <0x00020006 0x0000005c>,
/* Calibration data group 4 */
- 0x00030000 0x00000011
- 0x00030001 0x0000001a
- 0x00030002 0x00000024
- 0x00030003 0x0000002e
- 0x00030004 0x00000038
- 0x00030005 0x00000042
- 0x00030006 0x0000004c
- 0x00030007 0x00000056>;
+ <0x00030000 0x00000011>,
+ <0x00030001 0x0000001a>,
+ <0x00030002 0x00000024>,
+ <0x00030003 0x0000002e>,
+ <0x00030004 0x00000038>,
+ <0x00030005 0x00000042>,
+ <0x00030006 0x0000004c>,
+ <0x00030007 0x00000056>;
big-endian;
#thermal-sensor-cells = <1>;
};
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000023
- 0x00000001 0x0000002a
- 0x00000002 0x00000030
- 0x00000003 0x00000037
- 0x00000004 0x0000003d
- 0x00000005 0x00000044
- 0x00000006 0x0000004a
- 0x00000007 0x00000051
- 0x00000008 0x00000057
- 0x00000009 0x0000005e
- 0x0000000a 0x00000064
- 0x0000000b 0x0000006b
+ <0x00000000 0x00000023>,
+ <0x00000001 0x0000002a>,
+ <0x00000002 0x00000030>,
+ <0x00000003 0x00000037>,
+ <0x00000004 0x0000003d>,
+ <0x00000005 0x00000044>,
+ <0x00000006 0x0000004a>,
+ <0x00000007 0x00000051>,
+ <0x00000008 0x00000057>,
+ <0x00000009 0x0000005e>,
+ <0x0000000a 0x00000064>,
+ <0x0000000b 0x0000006b>,
/* Calibration data group 2 */
- 0x00010000 0x00000022
- 0x00010001 0x0000002a
- 0x00010002 0x00000032
- 0x00010003 0x0000003a
- 0x00010004 0x00000042
- 0x00010005 0x0000004a
- 0x00010006 0x00000052
- 0x00010007 0x0000005a
- 0x00010008 0x00000062
- 0x00010009 0x0000006a
+ <0x00010000 0x00000022>,
+ <0x00010001 0x0000002a>,
+ <0x00010002 0x00000032>,
+ <0x00010003 0x0000003a>,
+ <0x00010004 0x00000042>,
+ <0x00010005 0x0000004a>,
+ <0x00010006 0x00000052>,
+ <0x00010007 0x0000005a>,
+ <0x00010008 0x00000062>,
+ <0x00010009 0x0000006a>,
/* Calibration data group 3 */
- 0x00020000 0x00000021
- 0x00020001 0x0000002b
- 0x00020002 0x00000035
- 0x00020003 0x00000040
- 0x00020004 0x0000004a
- 0x00020005 0x00000054
- 0x00020006 0x0000005e
+ <0x00020000 0x00000021>,
+ <0x00020001 0x0000002b>,
+ <0x00020002 0x00000035>,
+ <0x00020003 0x00000040>,
+ <0x00020004 0x0000004a>,
+ <0x00020005 0x00000054>,
+ <0x00020006 0x0000005e>,
/* Calibration data group 4 */
- 0x00030000 0x00000010
- 0x00030001 0x0000001c
- 0x00030002 0x00000027
- 0x00030003 0x00000032
- 0x00030004 0x0000003e
- 0x00030005 0x00000049
- 0x00030006 0x00000054
- 0x00030007 0x00000060>;
+ <0x00030000 0x00000010>,
+ <0x00030001 0x0000001c>,
+ <0x00030002 0x00000027>,
+ <0x00030003 0x00000032>,
+ <0x00030004 0x0000003e>,
+ <0x00030005 0x00000049>,
+ <0x00030006 0x00000054>,
+ <0x00030007 0x00000060>;
little-endian;
#thermal-sensor-cells = <1>;
};
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
- fsl,tmu-calibration = <0x00000000 0x00000026
- 0x00000001 0x0000002d
- 0x00000002 0x00000032
- 0x00000003 0x00000039
- 0x00000004 0x0000003f
- 0x00000005 0x00000046
- 0x00000006 0x0000004d
- 0x00000007 0x00000054
- 0x00000008 0x0000005a
- 0x00000009 0x00000061
- 0x0000000a 0x0000006a
- 0x0000000b 0x00000071
-
- 0x00010000 0x00000025
- 0x00010001 0x0000002c
- 0x00010002 0x00000035
- 0x00010003 0x0000003d
- 0x00010004 0x00000045
- 0x00010005 0x0000004e
- 0x00010006 0x00000057
- 0x00010007 0x00000061
- 0x00010008 0x0000006b
- 0x00010009 0x00000076
-
- 0x00020000 0x00000029
- 0x00020001 0x00000033
- 0x00020002 0x0000003d
- 0x00020003 0x00000049
- 0x00020004 0x00000056
- 0x00020005 0x00000061
- 0x00020006 0x0000006d
-
- 0x00030000 0x00000021
- 0x00030001 0x0000002a
- 0x00030002 0x0000003c
- 0x00030003 0x0000004e>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000026>,
+ <0x00000001 0x0000002d>,
+ <0x00000002 0x00000032>,
+ <0x00000003 0x00000039>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000046>,
+ <0x00000006 0x0000004d>,
+ <0x00000007 0x00000054>,
+ <0x00000008 0x0000005a>,
+ <0x00000009 0x00000061>,
+ <0x0000000a 0x0000006a>,
+ <0x0000000b 0x00000071>,
+
+ <0x00010000 0x00000025>,
+ <0x00010001 0x0000002c>,
+ <0x00010002 0x00000035>,
+ <0x00010003 0x0000003d>,
+ <0x00010004 0x00000045>,
+ <0x00010005 0x0000004e>,
+ <0x00010006 0x00000057>,
+ <0x00010007 0x00000061>,
+ <0x00010008 0x0000006b>,
+ <0x00010009 0x00000076>,
+
+ <0x00020000 0x00000029>,
+ <0x00020001 0x00000033>,
+ <0x00020002 0x0000003d>,
+ <0x00020003 0x00000049>,
+ <0x00020004 0x00000056>,
+ <0x00020005 0x00000061>,
+ <0x00020006 0x0000006d>,
+
+ <0x00030000 0x00000021>,
+ <0x00030001 0x0000002a>,
+ <0x00030002 0x0000003c>,
+ <0x00030003 0x0000004e>;
little-endian;
#thermal-sensor-cells = <1>;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+ model = "TQ Systems GmbH MBLX2160A Starterkit";
+ compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+ "fsl,lx2160a";
+
+ aliases {
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-user1 {
+ label = "button:user1";
+ gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F1>;
+ };
+
+ button-user2 {
+ label = "button:user2";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-user1 {
+ gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-user2 {
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sfp_xfi1: sfp-xfi1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&xfi1_i2c>;
+ mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ sfp_xfi2: sfp-xfi2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&xfi2_i2c>;
+ mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&dpmac17 {
+ phy-handle = <&dp83867_2_3>;
+ phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+ phy-handle = <&dp83867_2_4>;
+ phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+ status = "okay";
+
+ dp83867_1_1: ethernet-phy@1 {
+ reg = <1>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_2: ethernet-phy@2 {
+ reg = <2>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_3: ethernet-phy@3 {
+ reg = <3>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_4: ethernet-phy@4 {
+ reg = <4>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_5: ethernet-phy@5 {
+ reg = <5>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_1_6: ethernet-phy@6 {
+ reg = <6>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+};
+
+&emdio2 {
+ status = "okay";
+
+ dp83867_2_1: ethernet-phy@1 {
+ reg = <1>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_2: ethernet-phy@2 {
+ reg = <2>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_3: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+
+ dp83867_2_4: ethernet-phy@4 {
+ reg = <4>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ no-mmc;
+ no-sdio;
+ wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ gpioex3: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ mux@70 {
+ compatible = "nxp,pca9544";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <®_vcc3v3>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpioex0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ gpioex1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ gpioex2: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ vcc-supply = <®_vcc3v3>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ mux@70 {
+ compatible = "nxp,pca9544";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <®_vcc3v3>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ xfi1_i2c: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ xfi2_i2c: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&pcs_mdio17 {
+ status = "okay";
+};
+
+&pcs_mdio18 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_2_0: hub@1 {
+ compatible = "usb451,8142";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb451,8140";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+ phy-handle = <&dp83867_2_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac10 {
+ phy-handle = <&dp83867_2_2>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+ status = "okay";
+};
+
+&pcs_mdio10 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+ managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+ phy-handle = <&dp83867_1_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac13 {
+ phy-handle = <&dp83867_1_5>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ phy-handle = <&dp83867_1_6>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac16 {
+ phy-handle = <&dp83867_1_4>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+ status = "okay";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&pcs_mdio16 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+ phy-handle = <&dp83867_1_1>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&dpmac13 {
+ sfp = <&sfp_xfi1>;
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ sfp = <&sfp_xfi2>;
+ managed = "in-band-status";
+};
+
+&dpmac16 {
+ phy-handle = <&dp83867_1_4>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+ status = "okay";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&pcs_mdio16 {
+ status = "okay";
+};
+
+&sfp_xfi1 {
+ status = "okay";
+};
+
+&sfp_xfi2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+ sfp = <&sfp_xfi1>;
+ managed = "in-band-status";
+};
+
+&dpmac14 {
+ sfp = <&sfp_xfi2>;
+ managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+ status = "okay";
+};
+
+&pcs_mdio14 {
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sfp_xfi1 {
+ status = "okay";
+};
+
+&sfp_xfi2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+
+&emdio1 {
+ status = "okay";
+};
+
+&emdio2 {
+ status = "okay";
+};
+
+&esdhc1 {
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&fspi {
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <10000000>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&i2c0 {
+ scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ sensor0: temperature-sensor@1f {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1f>;
+ };
+
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <12500>;
+ };
+
+ eeprom2: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
fsl,tmu-range = <0x800000e6 0x8001017d>;
fsl,tmu-calibration =
/* Calibration data group 1 */
- <0x00000000 0x00000035
+ <0x00000000 0x00000035>,
/* Calibration data group 2 */
- 0x00000001 0x00000154>;
+ <0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can1_supply";
+ startup-delay-us = <1000>;
};
reg_can2_supply: regulator-can2-supply {
gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can2_supply";
+ startup-delay-us = <1000>;
};
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "fsl,imx8qm-edma";
reg = <0x591f0000 0x190000>;
#dma-cells = <3>;
- shared-interrupt;
dma-channels = <24>;
dma-channel-mask = <0x5c0c00>;
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
compatible = "fsl,imx8qm-edma";
reg = <0x599f0000 0xc0000>;
#dma-cells = <3>;
- shared-interrupt;
dma-channels = <11>;
dma-channel-mask = <0xc0>;
interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
clock-frequency = <250000000>;
clock-output-names = "conn_enet0_root_clk";
};
+
+ clk_dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "clk_dummy";
+ };
};
&conn_subsys {
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eth_wake_irq", "macirq";
+ interrupt-names = "macirq", "eth_wake_irq";
clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
<&eqos_lpcg IMX_LPCG_CLK_6>,
<&eqos_lpcg IMX_LPCG_CLK_0>,
rx-burst-size-dword = <0x10>;
power-domains = <&pd IMX_SC_R_USB_1>;
status = "disabled";
-
- clk_dummy: clock-dummy {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "clk_dummy";
- };
};
usbmisc2: usbmisc@5b0e0200 {
*/
&ddr_pmu0 {
- compatible = "fsl,imx8-ddr-pmu";
+ compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
* Copyright 2020 Compass Electronics Group, LLC
*/
+#include "imx8mm-overdrive.dtsi"
+
/ {
aliases {
rtc0 = &rtc;
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
};
};
interrupts = <11 8>;
status = "okay";
- port {
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
-
typec1_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
PDO_VAR(5000, 20000, 3000)>;
op-sink-microwatt = <15000000>;
self-powered;
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
};
};
};
#address-cells = <1>;
#size-cells = <0>;
- i2c3@0 {
+ i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+ assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+ assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+ <&clk IMX8MM_CLK_VPU_G2>,
+ <&clk IMX8MM_CLK_VPU_H1>,
+ <&clk IMX8MM_VPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+ <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL3_OUT>;
+ assigned-clock-rates = <750000000>,
+ <700000000>,
+ <750000000>,
+ <700000000>;
+};
};
tpm: tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio2>;
pinctrl-names = "default";
/ {
model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+ chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio1 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@1,0 {
+ pcie@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@2,3 {
+ pcie@3,0 {
reg = <0x1800 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@5,0 {
+ eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
local-mac-address = [00 00 00 00 00 00];
};
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
>;
};
status = "okay";
tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@1,0 {
+ pcie@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@2,4 {
+ pcie@4,0 {
reg = <0x2000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@6,0 {
+ eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
local-mac-address = [00 00 00 00 00 00];
};
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@1,0 {
+ eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
local-mac-address = [00 00 00 00 00 00];
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ /* SODIMM 52 - USER_LED_1_RED */
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 54 - USER_LED_1_GREEN */
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 56 - USER_LED_2_RED */
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 58 - USER_LED_2_GREEN */
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+ pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm_irq>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <18500000>;
+ };
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+ status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+ compatible = "ti,tmp1075";
+ status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+ status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_leds: ledsgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x106>, /* SODIMM 52 */
+ <MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x106>, /* SODIMM 54 */
+ <MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x106>, /* SODIMM 56 */
+ <MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x106>; /* SODIMM 58 */
+ };
+
+ pinctrl_tpm_cs: tpmcsgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x146>; /* SODIMM 64 */
+ };
+
+ pinctrl_tpm_irq: tpmirqgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x141>; /* SODIMM 66 */
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Mini on Mallow";
+ compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+ "toradex,verdin-imx8mm-nonwifi",
+ "toradex,verdin-imx8mm",
+ "fsl,imx8mm";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Mini WB on Mallow";
+ compatible = "toradex,verdin-imx8mm-wifi-mallow",
+ "toradex,verdin-imx8mm-wifi",
+ "toradex,verdin-imx8mm",
+ "fsl,imx8mm";
+};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mm-ccm";
reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
- <&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_ARM_PLL_OUT>,
<400000000>,
<400000000>,
<750000000>,
- <594000000>,
<393216000>;
};
assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
<&clk IMX8MM_SYS_PLL2_1000M>,
<&clk IMX8MM_SYS_PLL1_800M>;
- assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+ assigned-clock-rates = <24000000>, <500000000>, <200000000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
status = "disabled";
clocks = <&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>;
clock-names = "bus_clk", "sclk_mipi";
- assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
- <&clk IMX8MM_CLK_DSI_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
- <&clk IMX8MM_CLK_24M>;
- assigned-clock-rates = <266000000>, <24000000>;
- samsung,pll-clock-frequency = <24000000>;
+ assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
status = "disabled";
assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
- assigned-clock-rates = <0>, <1000000000>;
+ assigned-clock-rates = <0>, <800000000>;
power-domains = <&pgc_gpu>;
};
assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
- assigned-clock-rates = <0>, <1000000000>;
+ assigned-clock-rates = <0>, <800000000>;
power-domains = <&pgc_gpu>;
};
* Copyright 2020 Compass Electronics Group, LLC
*/
+#include "imx8mn-overdrive.dtsi"
+
/ {
aliases {
rtc0 = &rtc;
/dts-v1/;
#include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
/ {
chosen {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 700000 0>; /* 700000 ns = 1337Hz */
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <50>;
+ status = "okay";
+ };
+
+ reg_3v3_dvdd: regulator-3v3-O3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvdd>;
+ regulator-name = "3v3-dvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_v3v3_avdd: regulator-3v3-O2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_avdd>;
+ regulator-name = "3v3-avdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bl>;
+ status = "okay";
+};
+
+&lcdif {
+ assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+ assigned-clock-rates = <594000000>;
+ status = "okay";
+};
+
+&pgc_dispmix {
+ assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,esc-clock-frequency = <20000000>;
+ samsung,pll-clock-frequency = <12000000>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "sharp,ls068b3sx02", "syna,r63353";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ reg = <0>;
+
+ backlight = <&backlight>;
+ dvdd-supply = <®_3v3_dvdd>;
+ avdd-supply = <®_v3v3_avdd>;
+ reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_avdd: avddgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x16 /* VDD 3V3_VO2 */
+ >;
+ };
+
+ /* This is for both PWM and voltage regulators for display */
+ pinctrl_bl: blgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x16
+ >;
+ };
+
+ pinctrl_dvdd: dvddgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 /* VDD 3V3_VO3 */
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x16 /* panel reset */
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+ model = "DimOnOff Gateway EVK board";
+ compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+ "fsl,imx8mn";
+
+ /*
+ * U30 FPF2193 regulator.
+ * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+ */
+ reg_disp_3v3: regulator-disp-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "Display 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ key-enter {
+ label = "enter";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ wakeup-source;
+ };
+ };
+
+ /* Bourns PEC12R rotary encoder, 24 steps. */
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rotary>;
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+ <&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+ linux,axis = <0>; /* REL_X */
+ rotary-encoder,encoding = "gray";
+ rotary-encoder,relative-axis;
+ };
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+ status = "disabled";
+};
+
+&ecspi1 {
+ /* Resistive touch controller */
+ /delete-node/ touchscreen@0;
+};
+
+&gpu {
+ status = "disabled";
+};
+
+&i2c2 {
+ adc@48 {
+ compatible = "ti,ads7924";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc>;
+ vref-supply = <®_disp_3v3>;
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ label = "Pot0";
+ };
+ channel@1 {
+ reg = <1>;
+ label = "Pot1";
+ };
+ channel@2 {
+ reg = <2>;
+ label = "Pot2";
+ };
+ channel@3 {
+ reg = <3>;
+ label = "Pot3";
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ reset-source; /* For watchdog. */
+ };
+
+ rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ reset-source; /* For watchdog. */
+ interrupt-parent = <&gpio5>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+ };
+};
+
+&i2c3 {
+ touchscreen@38 {
+ status = "disabled";
+ };
+
+ codec@1a {
+ status = "disabled";
+ };
+
+ /* DS1337 RTC module */
+ rtc@68 {
+ status = "disabled";
+ };
+};
+
+&sai5 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xc6
+ >;
+ };
+
+ pinctrl_rotary: rotarygrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x00000156
+ MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000156
+ >;
+ };
+
+ pinctrl_adc: adcgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00000156
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x00000156
+ MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x00000156
+ >;
+ };
+};
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
status = "okay";
- port {
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
- };
-
typec1_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
PDO_VAR(5000, 20000, 3000)>;
op-sink-microwatt = <15000000>;
self-powered;
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
};
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+ <&clk IMX8MN_CLK_GPU_SHADER>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <600000000>,
+ <600000000>,
+ <800000000>,
+ <400000000>,
+ <1200000000>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+ model = "RVE gateway";
+ compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+ crystal_duart_24m: crystal-duart-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ key-enter {
+ label = "enter";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-exit {
+ label = "exit";
+ gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ESC>;
+ };
+ };
+
+ lcd {
+ compatible = "hit,hd44780";
+ display-height-chars = <2>;
+ display-width-chars = <20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ data-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>,
+ <&gpio1 6 GPIO_ACTIVE_HIGH>,
+ <&gpio1 14 GPIO_ACTIVE_HIGH>,
+ <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio5 24 GPIO_ACTIVE_HIGH>,
+ <&gpio5 2 GPIO_ACTIVE_HIGH>,
+ <&gpio1 12 GPIO_ACTIVE_HIGH>,
+ <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+ rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* Bourns PEC12R rotary encoder, 24 steps. */
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rotary>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>, /* A */
+ <&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+ linux,axis = <0>; /* REL_X */
+ rotary-encoder,encoding = "gray";
+ rotary-encoder,relative-axis;
+ };
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+ duart1: serial@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+ clocks = <&crystal_duart_24m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+ "RADIO4", "RADIO_RESET", "TP12", "TP11";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ };
+
+ /delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ /delete-property/ dmas;
+ /delete-property/ dma-names;
+ status = "okay";
+
+ duart2: serial@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+ clocks = <&crystal_duart_24m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+ "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+ "GPIO_EXT0", "TP13";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ };
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+ gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ /* Carrier board EEPROM */
+ eeprom_cb: eeprom@56 {
+ compatible = "atmel,24c04";
+ reg = <0x56>;
+ pagesize = <16>;
+ vcc-supply = <®_3p3v>;
+ };
+
+ lm75: sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+ vs-supply = <®_3p3v>;
+ };
+
+ mcp7940: rtc@6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
+
+&i2c3 {
+ codec@1a {
+ status = "disabled";
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pcf8574_1: gpio@38 {
+ compatible = "nxp,pcf8574";
+ reg = <0x38>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+ "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+ "LED_B_COMM4";
+ };
+
+ pcf8574_2: gpio@39 {
+ compatible = "nxp,pcf8574";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+ "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+ "TP16", "TP17";
+ };
+};
+
+/* Bluetooth */
+&uart2 {
+ status = "disabled";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+ vmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13
+ MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13
+ MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13
+ MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x13 /* SS0 */
+ MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x13 /* SC16 IRQ */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x13
+ MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x13
+ MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x13
+ MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x13 /* SS0 */
+ MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x13 /* SC16 IRQ */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0xc6 /* Enter */
+ MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xc6 /* Exit */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x00000156 /* D0 */
+ MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x00000156 /* D1 */
+ MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00000156 /* D2 */
+ MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x00000156 /* D3 */
+ MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x00000156 /* D4 */
+ MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00000156 /* D5 */
+ MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00000156 /* D6 */
+ MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x00000156 /* D7 */
+ MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x00000156 /* E */
+ MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x00000156 /* RS */
+ MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x00000156 /* R/W */
+ >;
+ };
+
+ pinctrl_rotary: rotarygrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x00000156 /* A */
+ MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x00000156 /* B */
+ >;
+ };
+
+ /* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41
+ >;
+ };
+};
/ {
model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+ chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
linux,default-trigger = "heartbeat";
};
};
+
+ /* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+ reg_per_3v3: regulator-peripheral-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "per_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
ðphy {
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
#gpio-cells = <2>;
wakeup-source;
+ vcc-supply = <®_per_3v3>;
/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
usb3-sata-sel-hog {
gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_3v3_fixed: regulator-3v3-fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
&A53_0 {
compatible = "atmel,24c04";
reg = <0x52>;
pagesize = <16>;
+ vcc-supply = <®_3v3_fixed>;
};
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mn-ccm";
reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
};
};
+ bridge-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
enable-active-high;
};
+ sound-adv7535 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sound-adv7535";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai5>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&adv_bridge>;
+ };
+ };
+
sound-dmic {
compatible = "simple-audio-card";
simple-audio-card,name = "sound-pdm";
status = "okay";
tpm: tpm@0 {
- compatible = "infineon,slb9670";
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
#interrupt-cells = <2>;
};
+ adv_bridge: hdmi@3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+ reg-names = "main", "cec", "edid", "packet";
+ adi,dsi-lanes = <4>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
pcieclk: clock-generator@68 {
compatible = "renesas,9fgv0241";
reg = <0x68>;
};
};
+&lcdif1 {
+ status = "okay";
+};
+
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
status = "okay";
};
+&mipi_dsi {
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
status = "okay";
};
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
>;
};
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0xd6
+ >;
+ };
+
pinctrl_tpm: tpmgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
+ status = "disabled";
};
&usb3_phy0 {
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
- phy-connection-type = "rgmii-id";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
status = "okay";
regulator-always-on;
};
+ reg_csi1_1v8: regulator-csi1-vdd1v8 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "CSI1_VDD1V8";
+ gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_baseboard_vdd3v3>;
+ };
+
+ reg_csi1_3v3: regulator-csi1-vdd3v3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "CSI1_VDD3V3";
+ gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_vdd5v0>;
+ };
+
+ reg_csi2_1v8: regulator-csi2-vdd1v8 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "CSI2_VDD1V8";
+ gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_baseboard_vdd3v3>;
+ };
+
+ reg_csi2_3v3: regulator-csi2-vdd3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "CSI2_VDD3V3";
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_vdd5v0>;
+ };
+
regulator-vbus-usb20 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
>;
};
+ pinctrl_reg_csi2_1v8: regcsi21v8grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x19
+ >;
+ };
+
+ pinctrl_reg_csi2_3v3: regcsi23v3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f
#include "imx8mp.dtsi"
+#include <dt-bindings/leds/common.h>
+
/ {
model = "Polyhex i.MX8MPlus Debix SOM A";
compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ led-0 {
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
};
&A53_0 {
};
&iomuxc {
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
<&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-rates = <13000000>, <13000000>, <156000000>;
- reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
ports {
reg = <0x53>;
};
+ eeprom0wl: eeprom@58 {
+ compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x50 */
+ pagesize = <32>;
+ reg = <0x58>;
+ };
+
+ eeprom1wl: eeprom@5b {
+ compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x53 */
+ pagesize = <32>;
+ reg = <0x5b>;
+ };
+
ioexp: gpio@74 {
compatible = "nxp,pca9539";
reg = <0x74>;
};
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dsp_vdev0vring0: vdev0vring0@942f0000 {
+ reg = <0 0x942f0000 0 0x8000>;
+ no-map;
+ };
+
+ dsp_vdev0vring1: vdev0vring1@942f8000 {
+ reg = <0 0x942f8000 0 0x8000>;
+ no-map;
+ };
+
+ dsp_vdev0buffer: vdev0buffer@94300000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x94300000 0 0x100000>;
+ no-map;
+ };
+ };
};
&flexspi {
clocks = <&clk IMX8MP_CLK_CLKOUT1>;
#sound-dai-cells = <0>;
- VDDA-supply = <®_vcc_3v3_audio>;
- VDDD-supply = <®_vcc_1v8_audio>;
+ VDDA-supply = <®_vcc_3v3_audio>;
+ VDDD-supply = <®_vcc_1v8_audio>;
VDDIO-supply = <®_vcc_1v8_audio>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ /* some of this aliases like backlight0, ethernetX and switch0
+ * are needed for the bootloader.
+ */
+ backlight0 = &backlight;
+ ethernet0 = &eqos;
+ ethernet1 = &lan1;
+ ethernet2 = &lan2;
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs_rtc;
+ switch0 = &switch;
+ };
+
+ /*
+ * Backlight is present only on some of boards, so it is disabled by
+ * default.
+ */
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm1 0 20000 0>;
+ power-supply = <®_24v>;
+ enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <17>;
+ default-brightness-level = <8>;
+ status = "disabled";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ led-0 {
+ label = "D1";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "D2";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-2 {
+ label = "D3";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_1v2: regulator-1v2 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_5v_p>;
+ regulator-name = "1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ reg_2v5: regulator-2v5 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_5v_s>;
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ vin-supply = <®_5v_s>;
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /*
+ * This regulator will provide power as long as possible even if
+ * undervoltage is detected.
+ */
+ reg_5v_p: regulator-5v-p {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_P";
+ vin-supply = <®_24v>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /*
+ * This regulator will be automatically shutdown if undervoltage is
+ * detected.
+ */
+ reg_5v_s: regulator-5v-s {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_S";
+ vin-supply = <®_24v>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_24v: regulator-24v {
+ compatible = "regulator-fixed";
+ regulator-name = "24V";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ };
+
+ reg_can2rs: regulator-can2rs {
+ compatible = "regulator-fixed";
+ regulator-name = "CAN2RS";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2rs>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_canrs: regulator-canrs {
+ compatible = "regulator-fixed";
+ regulator-name = "CANRS";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_canrs>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_tft_vcom: regulator-tft-vcom {
+ compatible = "pwm-regulator";
+ pwms = <&pwm4 0 20000 0>;
+ regulator-name = "VCOM";
+ vin-supply = <®_5v_s>;
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ voltage-table = <3600000 26>;
+ status = "disabled";
+ };
+
+ reg_vsd_3v3: regulator-vsd-3v3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+ vin-supply = <®_vdd_3v3>;
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ adc: adc@0 {
+ compatible = "microchip,mcp3002";
+ reg = <0>;
+ vref-supply = <®_vdd_3v3>;
+ spi-max-frequency = <1000000>;
+ #io-channel-cells = <1>;
+ };
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_canrs>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2rs>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+ sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ reg_vdd_soc: BUCK1 {
+ regulator-name = "VDD_SOC";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_arm: BUCK2 {
+ regulator-name = "VDD_ARM";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_1v8: BUCK5 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_dram_1v1: BUCK6 {
+ regulator-name = "NVCC_DRAM_1V1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_snvs_1v8: LDO1 {
+ regulator-name = "NVCC_SNVS_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdda_1v8: LDO3 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_sd2: LDO5 {
+ regulator-name = "NVCC_SD2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_5v_p>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ i2c_rtc: rtc@51 {
+ compatible = "nxp,pcf85063tp";
+ reg = <0x51>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+ quartz-load-femtofarads = <12500>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <380000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ switch: switch@5f {
+ compatible = "microchip,ksz9893";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+ reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ reg = <0x5f>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lan1: port@0 {
+ reg = <0>;
+ phy-mode = "internal";
+ label = "lan1";
+ };
+
+ lan2: port@1 {
+ reg = <1>;
+ phy-mode = "internal";
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "cpu";
+ ethernet = <&eqos>;
+ phy-mode = "rgmii";
+ /* 2ns RX delay is implemented on PCB */
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_3v3>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_3v3>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_vsd_3v3>;
+ vqmmc-supply = <®_nvcc_sd2>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ vmmc-supply = <®_vdd_3v3>;
+ vqmmc-supply = <®_vdd_1v8>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0100
+ >;
+ };
+
+ pinctrl_can2rs: can2rsgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x154
+ >;
+ };
+
+ pinctrl_canrs: canrsgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x154
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
+ >;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154
+ MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
+ MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116
+ >;
+ };
+
+ pinctrl_reg_vsd_3v3: regvsd3v3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41
+ >;
+ };
+
+ pinctrl_switch: switchgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x41
+ MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ /* external 10 k pull up */
+ /* CTP_INT */
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41
+ /* CTP_RST */
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x41
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS 0x140
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+ model = "SKOV IMX8MP CPU revB - HDMI";
+ compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&iomuxc {
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+ model = "SKOV IMX8MP CPU revB - LT6";
+ compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+ io-channel-names = "y", "z1", "z2", "x";
+ touchscreen-min-pressure = <65000>;
+ touchscreen-inverted-y;
+ touchscreen-swapped-x-y;
+ touchscreen-x-plate-ohms = <300>;
+ };
+};
+
+®_tft_vcom {
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ voltage-table = <3600000 26>;
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ adc_ts: adc@0 {
+ compatible = "ti,tsc2046e-adc";
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_touch>;
+ pinctrl-names ="default";
+ spi-max-frequency = <1000000>;
+ interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* external pull up */
+ MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+ model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+ compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+ panel {
+ compatible = "multi-inno,mi1010ait-1cp";
+ backlight = <&backlight>;
+ power-supply = <®_tft_vcom>;
+
+ port {
+ in_lvds0: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+ };
+};
+
+&backlight {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1280>;
+ touchscreen-size-y = <800>;
+ vcc-supply = <®_vdd_3v3>;
+ iovcc-supply = <®_vdd_3v3>;
+ wakeup-source;
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ /* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+ assigned-clock-rates = <482300000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&in_lvds0>;
+ };
+ };
+ };
+};
+
+&media_blk_ctrl {
+ /* currently it is not possible to let display clocks confugure
+ * automatically, so we need to set them manually
+ */
+ assigned-clock-rates = <500000000>, <200000000>, <0>,
+ /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+ <68900000>,
+ /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+ <964600000>;
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+®_tft_vcom {
+ regulator-min-microvolt = <3160000>;
+ regulator-max-microvolt = <3160000>;
+ voltage-table = <3160000 73>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+ compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+ status = "okay";
+};
+
+&display {
+ compatible = "auo,g133han01";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&ldb_lvds_ch1>;
+ };
+ };
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+ <&clk IMX8MP_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <0>, <988400000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+
+ port@2 {
+ ldb_lvds_ch1: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
/ {
model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+ chassis-type = "embedded";
chosen {
stdout-path = &uart4;
clock-frequency = <25000000>;
};
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ label = "X29";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon0>;
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
fan0: pwm-fan {
compatible = "pwm-fan";
pinctrl-names = "default";
enable-active-high;
};
+ reg_vcc_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
reg_vcc_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
clock-names = "mclk";
clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
- iov-supply = <®_vcc_3v3>;
+ iov-supply = <®_vcc_1v8>;
ldoin-supply = <®_vcc_3v3>;
};
&usb3_1 {
fsl,disable-port-power-control;
fsl,permanently-attached;
- dr_mode = "host";
status = "okay";
};
role-switch-default-mode = "peripheral";
status = "okay";
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- type = "micro";
- label = "X29";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbcon0>;
- id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon1>;
+ type = "micro";
+ label = "Type-C";
+ id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
role-switch-default-mode = "peripheral";
status = "okay";
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbcon1>;
- type = "micro";
- label = "Type-C";
- id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon1>;
+ type = "micro";
+ label = "otg";
+ id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ tpm@1 {
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
&gpio4 {
role-switch-default-mode = "peripheral";
status = "okay";
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbcon1>;
- type = "micro";
- label = "otg";
- id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon1>;
+ type = "micro";
+ label = "otg";
+ id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
status = "okay";
tpm@1 {
- compatible = "tcg,tpm_tis-spi";
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
role-switch-default-mode = "peripheral";
status = "okay";
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbcon1>;
- type = "micro";
- label = "otg";
- id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
reg = <0x0 0x40000000 0 0x80000000>;
};
+ connector {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon1>;
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ label = "Type-C";
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
status = "okay";
tpm@0 {
- compatible = "tcg,tpm_tis-spi";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x0>;
spi-max-frequency = <36000000>;
};
role-switch-default-mode = "peripheral";
status = "okay";
- connector {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbcon1>;
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- type = "micro";
- label = "Type-C";
- id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ /* SODIMM 52 - USER_LED_1_RED */
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 54 - USER_LED_1_GREEN */
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 56 - USER_LED_2_RED */
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 58 - USER_LED_2_GREEN */
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&backlight {
+ power-supply = <®_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+ pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm_irq>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <18500000>;
+ };
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+ status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+ status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+ status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+ compatible = "ti,tmp1075";
+ status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+ status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+ status = "okay";
+};
+
+®_usdhc2_vmmc {
+ vin-supply = <®_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_leds: ledsgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x106>, /* SODIMM 52 */
+ <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x106>, /* SODIMM 54 */
+ <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x106>, /* SODIMM 56 */
+ <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x106>; /* SODIMM 58 */
+ };
+
+ pinctrl_tpm_cs: tpmcsgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */
+ };
+
+ pinctrl_tpm_irq: tpmirqgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x16>; /* SODIMM 66 */
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus on Mallow Board";
+ compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+ "toradex,verdin-imx8mp-nonwifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+ compatible = "toradex,verdin-imx8mp-wifi-mallow",
+ "toradex,verdin-imx8mp-wifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
status = "disabled";
};
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ label = "Type-C";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_1_id>;
+ self-powered;
+ type = "micro";
+ vbus-supply = <®_usb1_vbus>;
+
+ port {
+ usb_dr_connector: endpoint {
+ remote-endpoint = <&usb3_dwc>;
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
srp-disable;
usb-role-switch;
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- label = "Type-C";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_1_id>;
- self-powered;
- type = "micro";
- vbus-supply = <®_usb1_vbus>;
+ port {
+ usb3_dwc: endpoint {
+ remote-endpoint = <&usb_dr_connector>;
+ };
};
};
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
+ status = "disabled";
};
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mp-ccm";
reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
<&clk IMX8MP_CLK_AUDIO_AXI>;
assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
<&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
- <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-rates = <400000000>,
<600000000>;
};
clocks = <&clk IMX8MP_CLK_ML_AXI>,
<&clk IMX8MP_CLK_ML_AHB>,
<&clk IMX8MP_CLK_NPU_ROOT>;
+ assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+ <&clk IMX8MP_CLK_ML_AXI>,
+ <&clk IMX8MP_CLK_ML_AHB>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>,
+ <800000000>,
+ <300000000>;
};
};
};
compatible = "fsl,imx8mp-ldb";
reg = <0x5c 0x4>, <0x128 0x4>;
reg-names = "ldb", "lvds";
- clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
clock-names = "ldb";
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
interconnect-names = "g1", "g2", "vc8000e";
};
+ npu: npu@38500000 {
+ compatible = "vivante,gc";
+ reg = <0x38500000 0x200000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+ <&clk IMX8MP_CLK_NPU_ROOT>,
+ <&clk IMX8MP_CLK_ML_AXI>,
+ <&clk IMX8MP_CLK_ML_AHB>;
+ clock-names = "core", "shader", "bus", "reg";
+ power-domains = <&pgc_mlmix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
status = "okay";
tpm@0 {
- compatible = "infineon,slb9670";
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <43000000>;
};
fan: gpio-fan {
compatible = "gpio-fan";
- gpio-fan,speed-map = <0 0 8600 1>;
+ gpio-fan,speed-map = <0 0>, <8600 1>;
gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
#cooling-cells = <2>;
pinctrl-names = "default";
/ {
model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+ chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
&lpuart0 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+ dma-names = "rx","tx";
};
&lpuart1 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+ dma-names = "rx","tx";
};
&lpuart2 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+ dma-names = "rx","tx";
};
&lpuart3 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+ dma-names = "rx","tx";
};
&i2c0 {
};
gpio-sbu-mux {
- compatible = "gpio-sbu-mux";
+ compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec_mux>;
select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+&dsp_reserved {
+ status = "okay";
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
interrupt-parent = <&lsio_gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- port {
- typec_dr_sw: endpoint {
- remote-endpoint = <&usb3_drd_sw>;
- };
- };
-
usb_con1: connector {
compatible = "usb-c-connector";
label = "USB-C";
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+
+ typec_dr_sw: endpoint {
+ remote-endpoint = <&usb3_drd_sw>;
+ };
+ };
+
port@1 {
reg = <1>;
+
typec_con_ss: endpoint {
remote-endpoint = <&usb3_data_ss>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&vpu_core0 {
+ reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+ reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
serial3 = &lpuart3;
vpu-core0 = &vpu_core0;
vpu-core1 = &vpu_core1;
- vpu-core2 = &vpu_core2;
};
cpus {
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
+ status = "disabled";
};
encoder_rpc: encoder-rpc@94400000 {
};
#include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
#include "imx8qxp-ss-adma.dtsi"
#include "imx8qxp-ss-conn.dtsi"
#include "imx8qxp-ss-lsio.dtsi"
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ off-on-delay-us = <12000>;
enable-active-high;
};
};
>;
};
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
+ MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
+ MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
+ MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
+ MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
+ MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
+ MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
+ MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
+ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
>;
};
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+ model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+ compatible = "tq,imx93-tqma9352-mba93xxca",
+ "tq,imx93-tqma9352", "fsl,imx93";
+ chassis-type = "embedded";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ aliases {
+ eeprom0 = &eeprom0;
+ rtc0 = &pcf85063;
+ rtc1 = &bbnsm_rtc;
+ };
+
+ backlight_lvds: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpm5 0 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_12v0>;
+ enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwmfan>;
+ fan-supply = <®_pwm_fan>;
+ #cooling-cells = <2>;
+ /* typical 25 kHz -> 40.000 nsec */
+ pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+ cooling-levels = <0 32 64 128 196 240>;
+ pulses-per-revolution = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ status = "disabled";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-a {
+ label = "switcha";
+ linux,code = <BTN_0>;
+ gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-b {
+ label = "switchb";
+ linux,code = <BTN_1>;
+ gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_5V0_MB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mpcie_1v5: regulator-mpcie-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5_MPCIE";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mpcie_3v3: regulator-mpcie-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MPCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_pwm_fan: regulator-pwm-fan {
+ compatible = "regulator-fixed";
+ regulator-name = "FAN_PWR";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_12v0>;
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ trips {
+ cpu_active0: trip-active0 {
+ temperature = <40000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+
+ cpu_active1: trip-active1 {
+ temperature = <48000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+
+ cpu_active2: trip-active2 {
+ temperature = <60000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&cpu_active0>;
+ cooling-device = <&fan0 1 1>;
+ };
+
+ map2 {
+ trip = <&cpu_active1>;
+ cooling-device = <&fan0 2 2>;
+ };
+
+ map3 {
+ trip = <&cpu_active2>;
+ cooling-device = <&fan0 3 3>;
+ };
+ };
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_eqos>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy_eqos: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_phy>;
+ reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_fec>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy_fec: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_phy>;
+ reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ expander-irq-hog {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "PEX_INT#";
+ };
+
+ tcpc-irq-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "USB_C_ALERT#";
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ temperature-sensor@1c {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ eeprom2: eeprom@54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_3v3>;
+ };
+
+ expander0: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pexp_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+ "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+ "MPCIE_PERST#", "MPCIE_WDISABLE#",
+ "BUTTON_A#", "BUTTON_B#";
+
+ mpcie-wake-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "MPCIE_WAKE#";
+ };
+
+ /*
+ * Controls the mPCIE slot reset which is low active as
+ * reset signal. The output-low states, the signal is
+ * inactive, e.g. not in reset
+ */
+ mpcie_rst_hog: mpcie-rst-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_PERST#";
+ };
+
+ /*
+ * Controls the mPCIE slot WDISABLE pin which is low active
+ * as disable signal. The output-low states, the signal is
+ * inactive, e.g. not disabled
+ */
+ mpcie_wdisable_hog: mpcie-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_WDISABLE#";
+ };
+ };
+
+ expander1: gpio@71 {
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+ "USB_RESET#", "",
+ "WLAN_PD#", "WLAN_W_DISABLE#",
+ "WLAN_PERST#", "12V_EN";
+
+ /*
+ * Controls the on board USB Hub reset which is low
+ * active as reset signal. The output-low states, the
+ * signal is inactive, e.g. no reset
+ */
+ usb-reset-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "USB_RESET#";
+ };
+
+ /*
+ * Controls the WiFi card PD pin which is low active
+ * as power down signal. The output-high states, the signal
+ * is active, e.g. card is powered down
+ */
+ wlan-pd-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "WLAN_PD#";
+ };
+
+ /*
+ * Controls the WiFi card disable pin which is low active
+ * as disable signal. The output-high states, the signal
+ * is active, e.g. card is disabled
+ */
+ wlan-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "WLAN_W_DISABLE#";
+ };
+
+ /*
+ * Controls the WiFi card reset pin which is low active
+ * as reset signal. The output-high states, the signal
+ * is active, e.g. card in reset
+ */
+ wlan-perst-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "WLAN_PERST#";
+ };
+ };
+
+ expander2: gpio@72 {
+ compatible = "nxp,pca9538";
+ reg = <0x72>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+ "LCD_BLT_EN", "DP_EN",
+ "MIPI_CSI_EN", "MIPI_CSI_RST#",
+ "USER_LED1", "USER_LED2";
+ };
+};
+
+&lpi2c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-1 = <&pinctrl_lpi2c5>;
+ status = "okay";
+};
+
+&lpspi6 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpspi6>;
+ pinctrl-1 = <&pinctrl_lpspi6>;
+ status = "okay";
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "disabled";
+};
+
+&lpuart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&lpuart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&tpm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm6>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ disable-wp;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
+ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e
+ /* PD | FSEL_2 | DSE X6 */
+ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
+ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
+ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
+ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
+ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
+ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
+ >;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e
+ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e
+ /* PD | FSEL_2 | DSE X6 */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
+ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
+ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
+ /* PD | FSEL_3 | DSE X6 */
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
+ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
+ /* PD | FSEL_2 | DSE X4 */
+ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e
+ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e
+ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e
+ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e
+ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e
+ /* PD | FSEL_3 | DSE X3 */
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
+ >;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
+ MX93_PAD_PDM_CLK__CAN1_TX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpspi6: lpspi6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x3fe
+ MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe
+ MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe
+ MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe
+ >;
+ };
+
+ pinctrl_pexp_irq: pexpirqgrp {
+ fsl,pins = <
+ MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306
+ >;
+ };
+
+ pinctrl_pwmfan: pwmfangrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1306
+ >;
+ };
+
+ pinctrl_tpm5: tpm5grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
+ >;
+ };
+
+ pinctrl_tpm6: tpm6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e
+ >;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
+ MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
+ MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e
+ MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
+ MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
+ MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_hs: usdhc2hsgrp {
+ fsl,pins = <
+ /* HYS | PD | PU | FSEL_3 | DSE X5 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be
+ /* HYS | PD | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
+ /* HYS | PD | PU | FSEL_3 | DSE X3 */
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ /* PD | PU | FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ >;
+ };
+
+ pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+ fsl,pins = <
+ /* HYS | PD | PU | FSEL_3 | DSE X6 */
+ MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
+ /* HYS | PD | PU | FSEL_3 | DSE X4 */
+ MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
+ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
+ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
+ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
+ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
+ /* PD | PU | FSEL_2 | DSE X3 */
+ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
+ >;
+ };
+};
model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
compatible = "tq,imx93-tqma9352-mba93xxla",
"tq,imx93-tqma9352", "fsl,imx93";
+ chassis-type = "embedded";
chosen {
stdout-path = &lpuart1;
status = "disabled";
};
+ mqs1: mqs1 {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&aonmix_ns_gpr>;
+ status = "disabled";
+ };
+
+ mqs2: mqs2 {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&wakeupmix_gpr>;
+ status = "disabled";
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
status = "disabled";
};
+ i3c1: i3c-master@44330000 {
+ compatible = "silvaco,i3c-master-v1";
+ reg = <0x44330000 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_I3C1_GATE>,
+ <&clk IMX93_CLK_I3C1_SLOW>;
+ clock-names = "pclk", "fast_clk", "slow_clk";
+ status = "disabled";
+ };
+
lpi2c1: i2c@44340000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x44340000 0x10000>;
status = "disabled";
};
+ sai1: sai@443b0000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x443b0000 0x10000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
iomuxc: pinctrl@443c0000 {
compatible = "fsl,imx93-iomuxc";
reg = <0x443c0000 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
clock-names = "osc_32k", "osc_24m", "clk_ext1";
+ assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <393216000>;
status = "okay";
};
};
};
- anatop: anatop@44480000 {
- compatible = "fsl,imx93-anatop", "syscon";
+ clock-controller@44480000 {
+ compatible = "fsl,imx93-anatop";
reg = <0x44480000 0x2000>;
+ #clock-cells = <1>;
};
tmu: tmu@44482000 {
#thermal-sensor-cells = <1>;
};
+ micfil: micfil@44520000 {
+ compatible = "fsl,imx93-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_PDM_IPG>,
+ <&clk IMX93_CLK_PDM_GATE>,
+ <&clk IMX93_CLK_AUDIO_PLL>;
+ clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+ dmas = <&edma1 29 0 5>;
+ dma-names = "rx";
+ status = "disabled";
+ };
adc1: adc@44530000 {
compatible = "nxp,imx93-adc";
compatible = "fsl,imx93-edma4";
reg = <0x42000000 0x210000>;
#dma-cells = <3>;
- shared-interrupt;
dma-channels = <64>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
+ i3c2: i3c-master@42520000 {
+ compatible = "silvaco,i3c-master-v1";
+ reg = <0x42520000 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_I3C2_GATE>,
+ <&clk IMX93_CLK_I3C2_SLOW>;
+ clock-names = "pclk", "fast_clk", "slow_clk";
+ status = "disabled";
+ };
+
lpi2c3: i2c@42530000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x42530000 0x10000>;
status = "disabled";
};
+ sai2: sai@42650000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42650000 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai3: sai@42660000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42660000 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ xcvr: xcvr@42680000 {
+ compatible = "fsl,imx93-xcvr";
+ reg = <0x42680000 0x800>,
+ <0x42680800 0x400>,
+ <0x42680c00 0x080>,
+ <0x42680e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_SPDIF_GATE>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_AUD_XCVR_GATE>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
lpuart7: serial@42690000 {
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42690000 0x1000>;
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART8_GATE>;
clock-names = "ipg";
- dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
+ dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
<&clk IMX93_CLK_USDHC1_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <8>;
- fsl,tuning-start-tap = <20>;
+ fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
<&clk IMX93_CLK_USDHC2_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
- fsl,tuning-start-tap = <20>;
+ fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
<&clk IMX93_CLK_USDHC3_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
- fsl,tuning-start-tap = <20>;
+ fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
/ {
spmi: spmi@fff24000 {
compatible = "hisilicon,kirin970-spmi-controller";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
#address-cells = <2>;
#size-cells = <0>;
- status = "okay";
- reg = <0x0 0xfff24000 0x0 0x1000>;
hisilicon,spmi-channel = <2>;
pmic: pmic@0 {
gpios = <&gpio28 0 0>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
ldo3: ldo3 { /* HDMI */
regulator-name = "ldo3";
regulator-min-microvolt = <1500000>;
};
};
+ firmware {
+ svc {
+ compatible = "intel,agilex-svc";
+ method = "smc";
+ memory-region = <&service_reserved>;
+
+ fpga_mgr: fpga-mgr {
+ compatible = "intel,agilex-soc-fpga-mgr";
+ };
+ };
+ };
+
+ fpga-region {
+ compatible = "fpga-region";
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ fpga-mgr = <&fpga_mgr>;
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
compatible = "usb-nop-xceiv";
};
- soc {
+ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges = <0 0 0 0xffffffff>;
- base_fpga_region {
- #address-cells = <0x2>;
- #size-cells = <0x2>;
- compatible = "fpga-region";
- fpga-mgr = <&fpga_mgr>;
- };
-
clkmgr: clock-controller@ffd10000 {
compatible = "intel,agilex-clkmgr";
reg = <0xffd10000 0x1000>;
pinctrl-single,function-mask = <0x0000000f>;
};
- pinctrl1: pinconf@ffd13100 {
+ pinctrl1: pinctrl@ffd13100 {
compatible = "pinctrl-single";
#pinctrl-cells = <1>;
reg = <0xffd13100 0x20>;
status = "disabled";
};
-
- firmware {
- svc {
- compatible = "intel,agilex-svc";
- method = "smc";
- memory-region = <&service_reserved>;
-
- fpga_mgr: fpga-mgr {
- compatible = "intel,agilex-soc-fpga-mgr";
- };
- };
- };
};
};
ranges;
#interrupt-cells = <3>;
#address-cells = <2>;
- #size-cells =<2>;
+ #size-cells = <2>;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
num-cs = <4>;
clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
dmas = <&dmac0 2>, <&dmac0 3>;
- dma-names ="tx", "rx";
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0x80000000 0 0>;
};
- soc {
+ soc@0 {
bus@80000000 {
compatible = "simple-bus";
reg = <0x80000000 0x60000000>,
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <2>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
reg = <0 0x80000000 0 0>;
};
- soc {
+ soc@0 {
sdram_edac: memory-controller@f87f8000 {
compatible = "snps,ddrc-3.80a";
reg = <0xf87f8000 0x400>;
interrupts = <0 175 4>;
- status = "okay";
};
};
};
spi-max-frequency = <100000000>;
m25p,fast-read;
- cdns,page-size = <256>;
- cdns,block-size = <16>;
cdns,read-delay = <2>;
cdns,tshsl-ns = <50>;
cdns,tsd2d-ns = <50>;
amba {
#address-cells = <2>;
#size-cells = <1>;
- #interrupt-cells = <3>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
amba {
#address-cells = <2>;
#size-cells = <1>;
- #interrupt-cells = <3>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+ model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+ compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+ "marvell,cn9131-cpu-module", "marvell,cn9131",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x00000000>;
+ };
+
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+ model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+ compatible = "marvell,rd-ac5x-carrier";
+
+};
reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
- ports {
- switch0port1: port@1 {
+ ethernet-ports {
+ switch0port1: ethernet-port@1 {
reg = <1>;
label = "lan0";
phy-handle = <&switch0phy0>;
};
- switch0port2: port@2 {
+ switch0port2: ethernet-port@2 {
reg = <2>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
- switch0port3: port@3 {
+ switch0port3: ethernet-port@3 {
reg = <3>;
label = "lan2";
phy-handle = <&switch0phy2>;
};
- switch0port4: port@4 {
+ switch0port4: ethernet-port@4 {
reg = <4>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
- switch0port5: port@5 {
+ switch0port5: ethernet-port@5 {
reg = <5>;
label = "wan";
phy-handle = <&extphy>;
};
mdio {
- switch0phy3: switch0phy3@14 {
+ switch0phy3: ethernet-phy@14 {
reg = <0x14>;
};
};
};
&mdio {
- switch0: switch0@1 {
+ switch0: ethernet-switch@1 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- switch0port0: port@0 {
+ switch0port0: ethernet-port@0 {
reg = <0>;
label = "cpu";
ethernet = <ð0>;
};
};
- switch0port1: port@1 {
+ switch0port1: ethernet-port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
- switch0port2: port@2 {
+ switch0port2: ethernet-port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
};
- switch0port3: port@3 {
+ switch0port3: ethernet-port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@11 {
+ switch0phy0: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1@12 {
+ switch0phy1: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2@13 {
+ switch0phy2: ethernet-phy@13 {
reg = <0x13>;
};
};
};
&mdio {
- switch0: switch0@1 {
+ switch0: ethernet-switch@1 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
- ports: ports {
+ ports: ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "cpu";
ethernet = <ð0>;
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
nvmem-cell-names = "mac-address";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@11 {
+ switch0phy0: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1@12 {
+ switch0phy1: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2@13 {
+ switch0phy2: ethernet-phy@13 {
reg = <0x13>;
};
};
compatible = "microchip,mcp7940x";
reg = <0x6f>;
interrupt-parent = <&gpiosb>;
- interrupts = <5 0>; /* GPIO2_5 */
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
};
};
reg = <1>;
};
- /* switch nodes are enabled by U-Boot if modules are present */
+ /*
+ * NOTE: switch nodes are enabled by U-Boot if modules are present
+ * DO NOT change this node name (switch0@10) even if it is not following
+ * conventions! Deployed U-Boot binaries are explicitly looking for
+ * this node in order to augment the device tree!
+ * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+ */
switch0@10 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x10>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1: switch0phy1@1 {
+ switch0phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy2: switch0phy2@2 {
+ switch0phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy3: switch0phy3@3 {
+ switch0phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy4: switch0phy4@4 {
+ switch0phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy5: switch0phy5@5 {
+ switch0phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy6: switch0phy6@6 {
+ switch0phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy7: switch0phy7@7 {
+ switch0phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy8: switch0phy8@8 {
+ switch0phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
};
};
+ /* NOTE: this node name is ABI, don't change it! */
switch0@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1_topaz: switch0phy1@11 {
+ switch0phy1_topaz: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy2_topaz: switch0phy2@12 {
+ switch0phy2_topaz: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy3_topaz: switch0phy3@13 {
+ switch0phy3_topaz: ethernet-phy@13 {
reg = <0x13>;
};
- switch0phy4_topaz: switch0phy4@14 {
+ switch0phy4_topaz: ethernet-phy@14 {
reg = <0x14>;
};
};
};
};
+ /* NOTE: this node name is ABI, don't change it! */
switch1@11 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x11>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch1phy1: switch1phy1@1 {
+ switch1phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch1phy2: switch1phy2@2 {
+ switch1phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch1phy3: switch1phy3@3 {
+ switch1phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch1phy4: switch1phy4@4 {
+ switch1phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch1phy5: switch1phy5@5 {
+ switch1phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch1phy6: switch1phy6@6 {
+ switch1phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch1phy7: switch1phy7@7 {
+ switch1phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch1phy8: switch1phy8@8 {
+ switch1phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
};
};
+ /* NOTE: this node name is ABI, don't change it! */
switch1@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch1phy1_topaz: switch1phy1@11 {
+ switch1phy1_topaz: ethernet-phy@11 {
reg = <0x11>;
};
- switch1phy2_topaz: switch1phy2@12 {
+ switch1phy2_topaz: ethernet-phy@12 {
reg = <0x12>;
};
- switch1phy3_topaz: switch1phy3@13 {
+ switch1phy3_topaz: ethernet-phy@13 {
reg = <0x13>;
};
- switch1phy4_topaz: switch1phy4@14 {
+ switch1phy4_topaz: ethernet-phy@14 {
reg = <0x14>;
};
};
};
};
+ /* NOTE: this node name is ABI, don't change it! */
switch2@12 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x12>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch2phy1: switch2phy1@1 {
+ switch2phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch2phy2: switch2phy2@2 {
+ switch2phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch2phy3: switch2phy3@3 {
+ switch2phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch2phy4: switch2phy4@4 {
+ switch2phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch2phy5: switch2phy5@5 {
+ switch2phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch2phy6: switch2phy6@6 {
+ switch2phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch2phy7: switch2phy7@7 {
+ switch2phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch2phy8: switch2phy8@8 {
+ switch2phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
};
};
+ /* NOTE: this node name is ABI, don't change it! */
switch2@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
#address-cells = <1>;
#size-cells = <0>;
- switch2phy1_topaz: switch2phy1@11 {
+ switch2phy1_topaz: ethernet-phy@11 {
reg = <0x11>;
};
- switch2phy2_topaz: switch2phy2@12 {
+ switch2phy2_topaz: ethernet-phy@12 {
reg = <0x12>;
};
- switch2phy3_topaz: switch2phy3@13 {
+ switch2phy3_topaz: ethernet-phy@13 {
reg = <0x13>;
};
- switch2phy4_topaz: switch2phy4@14 {
+ switch2phy4_topaz: ethernet-phy@14 {
reg = <0x14>;
};
};
};
/* 88E6141 Topaz switch */
- switch: switch@3 {
+ switch: ethernet-switch@3 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <3>;
pinctrl-names = "default";
interrupt-parent = <&cp0_gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- swport1: port@1 {
+ swport1: ethernet-port@1 {
reg = <1>;
label = "lan0";
phy-handle = <&swphy1>;
};
- swport2: port@2 {
+ swport2: ethernet-port@2 {
reg = <2>;
label = "lan1";
phy-handle = <&swphy2>;
};
- swport3: port@3 {
+ swport3: ethernet-port@3 {
reg = <3>;
label = "lan2";
phy-handle = <&swphy3>;
};
- swport4: port@4 {
+ swport4: ethernet-port@4 {
reg = <4>;
label = "lan3";
phy-handle = <&swphy4>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "cpu";
ethernet = <&cp0_eth1>;
#address-cells = <1>;
#size-cells = <0>;
- swphy1: swphy1@17 {
+ swphy1: ethernet-phy@17 {
reg = <17>;
};
- swphy2: swphy2@18 {
+ swphy2: ethernet-phy@18 {
reg = <18>;
};
- swphy3: swphy3@19 {
+ swphy3: ethernet-phy@19 {
reg = <19>;
};
- swphy4: swphy4@20 {
+ swphy4: ethernet-phy@20 {
reg = <20>;
};
};
reset-deassert-us = <10000>;
};
- switch0: switch0@4 {
+ switch0: ethernet-switch@4 {
compatible = "marvell,mv88e6085";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cp1_switch_reset_pins>;
reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan4";
phy-handle = <&switch0phy2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "cpu";
ethernet = <&cp1_eth2>;
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@11 {
+ switch0phy0: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1@12 {
+ switch0phy1: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2@13 {
+ switch0phy2: ethernet-phy@13 {
reg = <0x13>;
};
- switch0phy3: switch0phy3@14 {
+ switch0phy3: ethernet-phy@14 {
reg = <0x14>;
};
};
odmi: odmi@300000 {
compatible = "marvell,odmi-controller";
- interrupt-controller;
msi-controller;
marvell,odmi-frames = <4>;
reg = <0x300000 0x4000>,
reg = <0>;
};
- switch6: switch0@6 {
+ switch6: ethernet-switch@6 {
/* Actual device is MV88E6393X */
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <6>;
interrupt-parent = <&cp0_gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
dsa,member = <0 0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "p1";
phy-handle = <&switch0phy1>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "p2";
phy-handle = <&switch0phy2>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "p3";
phy-handle = <&switch0phy3>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "p4";
phy-handle = <&switch0phy4>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "p5";
phy-handle = <&switch0phy5>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "p6";
phy-handle = <&switch0phy6>;
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "p7";
phy-handle = <&switch0phy7>;
};
- port@8 {
+ ethernet-port@8 {
reg = <8>;
label = "p8";
phy-handle = <&switch0phy8>;
};
- port@9 {
+ ethernet-port@9 {
reg = <9>;
label = "p9";
phy-mode = "10gbase-r";
managed = "in-band-status";
};
- port@a {
+ ethernet-port@a {
reg = <10>;
ethernet = <&cp0_eth0>;
phy-mode = "10gbase-r";
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1: switch0phy1@1 {
+ switch0phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy2: switch0phy2@2 {
+ switch0phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy3: switch0phy3@3 {
+ switch0phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy4: switch0phy4@4 {
+ switch0phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy5: switch0phy5@5 {
+ switch0phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy6: switch0phy6@6 {
+ switch0phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy7: switch0phy7@7 {
+ switch0phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy8: switch0phy8@8 {
+ switch0phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+ compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+ compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp1_usb3_0_phy0>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
pmic: pmic {
compatible = "mediatek,mt6358";
interrupt-controller;
- interrupt-parent = <&pio>;
- interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
mt6358codec: mt6358codec {
};
mt6358_vrf12_reg: ldo_vrf12 {
- compatible = "regulator-fixed";
regulator-name = "vrf12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
mt6358_vio18_reg: ldo_vio18 {
- compatible = "regulator-fixed";
regulator-name = "vio18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
mt6358_vcamio_reg: ldo_vcamio {
- compatible = "regulator-fixed";
regulator-name = "vcamio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
mt6358_vcn18_reg: ldo_vcn18 {
- compatible = "regulator-fixed";
regulator-name = "vcn18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
mt6358_vfe28_reg: ldo_vfe28 {
- compatible = "regulator-fixed";
regulator-name = "vfe28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
mt6358_vcn28_reg: ldo_vcn28 {
- compatible = "regulator-fixed";
regulator-name = "vcn28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
mt6358_vxo22_reg: ldo_vxo22 {
- compatible = "regulator-fixed";
regulator-name = "vxo22";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
};
mt6358_vaux18_reg: ldo_vaux18 {
- compatible = "regulator-fixed";
regulator-name = "vaux18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
mt6358_vbif28_reg: ldo_vbif28 {
- compatible = "regulator-fixed";
regulator-name = "vbif28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
mt6358_vio28_reg: ldo_vio28 {
- compatible = "regulator-fixed";
regulator-name = "vio28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
mt6358_va12_reg: ldo_va12 {
- compatible = "regulator-fixed";
regulator-name = "va12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
mt6358_vrf18_reg: ldo_vrf18 {
- compatible = "regulator-fixed";
regulator-name = "vrf18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <120>;
};
- mt6358_vcn33_bt_reg: ldo_vcn33_bt {
- regulator-name = "vcn33_bt";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3500000>;
- regulator-enable-ramp-delay = <270>;
- };
-
- mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
- regulator-name = "vcn33_wifi";
+ mt6358_vcn33_reg: ldo_vcn33 {
+ regulator-name = "vcn33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3500000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vaud28_reg: ldo_vaud28 {
- compatible = "regulator-fixed";
regulator-name = "vaud28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <1>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 54 0>;
ports {
reg = <31>;
interrupt-controller;
#interrupt-cells = <1>;
- interrupt-parent = <&pio>;
- interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
};
};
touchscreen2: touchscreen@34 {
compatible = "melfas,mip4_ts";
reg = <0x34>;
- interrupt-parent = <&pio>;
- interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
};
/*
compatible = "hid-over-i2c";
reg = <0x20>;
hid-descr-addr = <0x0020>;
- interrupt-parent = <&pio>;
- interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
};
};
*/
trackpad2: trackpad@2c {
compatible = "hid-over-i2c";
- interrupt-parent = <&pio>;
- interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
reg = <0x2c>;
hid-descr-addr = <0x0020>;
wakeup-source;
reg = <0x1a>;
avdd-supply = <&mt6397_vgp1_reg>;
cpvdd-supply = <&mt6397_vcama_reg>;
- interrupt-parent = <&pio>;
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
pinctrl-names = "default";
pinctrl-0 = <&rt5650_irq>;
#sound-dai-cells = <1>;
da9211: da9211@68 {
compatible = "dlg,da9211";
reg = <0x68>;
- interrupt-parent = <&pio>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
regulators {
da9211_vcpu_reg: BUCKA {
touchscreen: touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
};
};
trackpad: trackpad@15 {
compatible = "elan,ekth3000";
- interrupt-parent = <&pio>;
- interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
reg = <0x15>;
vcc-supply = <&mt6397_vgp6_reg>;
wakeup-source;
btmrvl: btmrvl@2 {
compatible = "marvell,sd8897-bt";
reg = <2>;
- interrupt-parent = <&pio>;
- interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
marvell,wakeup-pin = /bits/ 16 <0x0d>;
marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
};
mwifiex: mwifiex@1 {
compatible = "marvell,sd8897";
reg = <1>;
- interrupt-parent = <&pio>;
- interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
marvell,wakeup-pin = <3>;
};
};
compatible = "mediatek,mt6397";
#address-cells = <1>;
#size-cells = <1>;
- interrupt-parent = <&pio>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
compatible = "google,cros-ec-spi";
reg = <0x0>;
spi-max-frequency = <12000000>;
- interrupt-parent = <&pio>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
google,cros-ec-spi-msg-delay = <500>;
i2c_tunnel: i2c-tunnel0 {
pmic: pmic {
compatible = "mediatek,mt6397";
- interrupt-parent = <&pio>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#clock-cells = <1>;
};
- vcodec_dec: vcodec@16000000 {
+ vcodec_dec: vcodec@16020000 {
compatible = "mediatek,mt8173-vcodec-dec";
- reg = <0 0x16000000 0 0x100>, /* VDEC_SYS */
- <0 0x16020000 0 0x1000>, /* VDEC_MISC */
+ reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */
<0 0x16021000 0 0x800>, /* VDEC_LD */
<0 0x16021800 0 0x800>, /* VDEC_TOP */
<0 0x16022000 0 0x1000>, /* VDEC_CM */
<0 0x16027000 0 0x800>, /* VDEC_HWQ */
<0 0x16027800 0 0x800>, /* VDEC_HWB */
<0 0x16028400 0 0x400>; /* VDEC_HWG */
+ reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+ "hwd", "hwq", "hwb", "hwg";
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
<&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
mediatek,vpu = <&vpu>;
+ mediatek,vdecsys = <&vdecsys>;
power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
<&topckgen CLK_TOP_UNIVPLL_D2>,
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
pinctrl-0 = <&da7219_pins>;
compatible = "dlg,da7219";
reg = <0x1a>;
- interrupt-parent = <&pio>;
- interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+ interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
dlg,micbias-lvl = <2600>;
dlg,mic-amp-in-sel = "diff";
pinctrl-0 = <&ts3a227e_pins>;
compatible = "ti,ts3a227e";
reg = <0x3b>;
- interrupt-parent = <&pio>;
- interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
status = "okay";
};
};
compatible = "hid-over-i2c";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
compatible = "hid-over-i2c";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
compatible = "hid-over-i2c";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
compatible = "hid-over-i2c";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+ model = "Google makomo sku0 board";
+ chassis-type = "laptop";
+ compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+ pins-clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+ model = "Google makomo sku1 board";
+ chassis-type = "laptop";
+ compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+ pins-clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+ model = "Google pico board";
+ chassis-type = "convertible";
+ compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+ google,remote-bus = <0>;
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <25000>;
+
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+ model = "Google pico6 board";
+ chassis-type = "convertible";
+ compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+ bt_wakeup: bt-wakeup {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins_wakeup>;
+
+ wobt {
+ label = "Wake on BT";
+ gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+};
+
+&i2c_tunnel {
+ google,remote-bus = <0>;
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <25000>;
+
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
+
+&wifi_wakeup {
+ wowlan {
+ gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&wifi_pwrseq {
+ post-power-on-delay-ms = <50>;
+
+ /* Toggle WIFI_ENABLE to reset the chip. */
+ reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+ pins-wifi-enable {
+ pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+ };
+};
+
+&mmc1_pins_default {
+ pins-cmd-dat {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+ pins-clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
+
+&mmc1_pins_uhs {
+ pins-clk {
+ drive-strength = <MTK_DRIVE_6mA>;
+ };
+};
+
+&mmc1 {
+ bt_reset: bt-reset {
+ compatible = "mediatek,mt7921s-bluetooth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins_reset>;
+ reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pio {
+ bt_pins_wakeup: bt-pins-wakeup {
+ piins-bt-wakeup {
+ pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+ input-enable;
+ };
+ };
+
+ bt_pins_reset: bt-pins-reset {
+ pins-bt-reset {
+ pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+ output-high;
+ };
+ };
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&anx7625_pins>;
- panel_flags = <1>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
vdd10-supply = <&pp1200_mipibrdg>;
"google,kakadu", "mediatek,mt8183";
};
+&i2c0 {
+ touchscreen: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ };
+};
+
+&panel {
+ compatible = "boe,tv105wum-nw0";
+};
+
&sound {
compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
};
compatible = "google,kakadu-rev3", "google,kakadu-rev2",
"google,kakadu", "mediatek,mt8183";
};
+
+&i2c0 {
+ touchscreen: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ };
+};
+
+&panel {
+ compatible = "boe,tv105wum-nw0";
+};
&i2c0 {
status = "okay";
-
- touchscreen: touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
- pinctrl-names = "default";
- pinctrl-0 = <&open_touch>;
-
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
-
- post-power-on-delay-ms = <10>;
- hid-descr-addr = <0x0001>;
- };
};
&mt6358_vcama2_reg {
&panel {
status = "okay";
- compatible = "boe,tv105wum-nw0";
+ /* compatible will be set in board dts */
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+ model = "Google katsu board";
+ chassis-type = "tablet";
+ compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+ touchscreen1: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&lcd_pp3300>;
+ };
+};
+
+&panel {
+ compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_KATSU";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+ model = "Google katsu sku38 board";
+ chassis-type = "tablet";
+ compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+ touchscreen1: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&open_touch>;
+
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&lcd_pp3300>;
+ };
+};
+
+&panel {
+ compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+ compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
touchscreen: touchscreen@10 {
compatible = "hid-over-i2c";
reg = <0x10>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touch_default>;
pinctrl-names = "default";
pinctrl-0 = <&open_touch>;
- interrupt-parent = <&pio>;
- interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
post-power-on-delay-ms = <10>;
hid-descr-addr = <0x0001>;
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&pwm0 {
status = "okay";
pinctrl-names = "default";
status = "okay";
cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
- cr50@0 {
+ tpm@0 {
compatible = "google,cr50";
reg = <0>;
spi-max-frequency = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&h1_int_od_l>;
- interrupt-parent = <&pio>;
- interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
};
};
compatible = "google,cros-ec-spi";
reg = <0>;
spi-max-frequency = <3000000>;
- interrupt-parent = <&pio>;
- interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+ interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ec_ap_int_odl>;
};
};
+&pmic {
+ interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
status = "disabled";
};
- svs: svs@1100b000 {
- compatible = "mediatek,mt8183-svs";
- reg = <0 0x1100b000 0 0x1000>;
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&infracfg CLK_INFRA_THERM>;
- clock-names = "main";
- nvmem-cells = <&svs_calibration>,
- <&thermal_calibration>;
- nvmem-cell-names = "svs-calibration-data",
- "t-calibration-data";
- };
-
thermal: thermal@1100b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt8183-thermal";
- reg = <0 0x1100b000 0 0x1000>;
+ reg = <0 0x1100b000 0 0xc00>;
clocks = <&infracfg CLK_INFRA_THERM>,
<&infracfg CLK_INFRA_AUXADC>;
clock-names = "therm", "auxadc";
nvmem-cell-names = "calibration-data";
};
+ svs: svs@1100bc00 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100bc00 0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
};
- mdp3-rdma0@14001000 {
+ dma-controller0@14001000 {
compatible = "mediatek,mt8183-mdp3-rdma";
reg = <0 0x14001000 0 0x1000>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
<&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+ #dma-cells = <1>;
};
mdp3-rsz0@14003000 {
clocks = <&mmsys CLK_MM_MDP_RSZ1>;
};
- mdp3-wrot0@14005000 {
+ dma-controller@14005000 {
compatible = "mediatek,mt8183-mdp3-wrot";
reg = <0 0x14005000 0 0x1000>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_MDP_WROT0>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
+ #dma-cells = <1>;
};
mdp3-wdma@14006000 {
#clock-cells = <1>;
};
+ vcodec_dec: video-codec@16020000 {
+ compatible = "mediatek,mt8183-vcodec-dec";
+ reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */
+ <0 0x16021000 0 0x800>, /* VDEC_VLD */
+ <0 0x16021800 0 0x800>, /* VDEC_TOP */
+ <0 0x16022000 0 0x1000>, /* VDEC_MC */
+ <0 0x16023000 0 0x1000>, /* VDEC_AVCVLD */
+ <0 0x16024000 0 0x1000>, /* VDEC_AVCMV */
+ <0 0x16025000 0 0x1000>, /* VDEC_PP */
+ <0 0x16026800 0 0x800>, /* VP8_VD */
+ <0 0x16027000 0 0x800>, /* VP6_VD */
+ <0 0x16027800 0 0x800>, /* VP8_VL */
+ <0 0x16028400 0 0x400>; /* VP9_VD */
+ reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+ "hwd", "hwq", "hwb", "hwg";
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+ iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+ <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+ mediatek,scp = <&scp>;
+ mediatek,vdecsys = <&vdecsys>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+ clocks = <&vdecsys CLK_VDEC_VDEC>;
+ clock-names = "vdec";
+ };
+
larb1: larb@16010000 {
compatible = "mediatek,mt8183-smi-larb";
reg = <0 0x16010000 0 0x1000>;
aliases {
ovl0 = &ovl0;
- ovl_2l0 = &ovl_2l0;
+ ovl-2l0 = &ovl_2l0;
rdma0 = &rdma0;
rdma1 = &rdma1;
};
status = "disabled";
};
- adsp_mailbox0: mailbox@10686000 {
+ adsp_mailbox0: mailbox@10686100 {
compatible = "mediatek,mt8186-adsp-mbox";
#mbox-cells = <0>;
reg = <0 0x10686100 0 0x1000>;
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
};
- adsp_mailbox1: mailbox@10687000 {
+ adsp_mailbox1: mailbox@10687100 {
compatible = "mediatek,mt8186-adsp-mbox";
#mbox-cells = <0>;
reg = <0 0x10687100 0 0x1000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+ model = "MediaTek MT8188 evaluation board";
+ compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+ aliases {
+ serial0 = &uart0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mmc0 = &mmc0;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scp_mem_reserved: memory@50000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x2900000>;
+ no-map;
+ };
+ };
+};
+
+&auxadc {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&mmc0 {
+ bus-width = <8>;
+ hs400-ds-delay = <0x1481b>;
+ max-frequency = <200000000>;
+
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ supports-cqe;
+ cap-mmc-hw-reset;
+ no-sdio;
+ no-sd;
+ non-removable;
+
+ vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_default_pins>;
+ pinctrl-1 = <&mmc0_uhs_pins>;
+
+ status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+ regulator-always-on;
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nor_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ };
+};
+
+&pio {
+ adsp_uart_pins: adsp-uart-pins {
+ pins-tx-rx {
+ pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+ <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+ <PINMUX_GPIO55__FUNC_B1_SCL0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+ <PINMUX_GPIO57__FUNC_B1_SCL1>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+ <PINMUX_GPIO59__FUNC_B1_SCL2>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+ <PINMUX_GPIO61__FUNC_B1_SCL3>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c4_pins: i2c4-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+ <PINMUX_GPIO63__FUNC_B1_SCL4>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c5_pins: i2c5-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+ <PINMUX_GPIO65__FUNC_B1_SCL5>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ i2c6_pins: i2c6-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+ <PINMUX_GPIO67__FUNC_B1_SCL6>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+ };
+ };
+
+ mmc0_default_pins: mmc0-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+ <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+ <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+ <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+ <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+ <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+ <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+ <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+ <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc0_uhs_pins: mmc0-uhs-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+ <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+ <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+ <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+ <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+ <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+ <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+ <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+ <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk-ds {
+ pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+ <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+ drive-strength = <8>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ nor_pins_default: nor-pins {
+ pins-io-ck {
+ pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+ <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+ <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+ bias-pull-down;
+ };
+
+ pins-io-cs {
+ pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+ <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+ <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+ bias-pull-up;
+ };
+ };
+
+ spi0_pins: spi0-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+ <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+ <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+ <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+ bias-disable;
+ };
+ };
+
+ spi1_pins: spi1-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+ <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+ <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+ <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+ bias-disable;
+ };
+ };
+
+ spi2_pins: spi2-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+ <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+ <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+ <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ pins-rx-tx {
+ pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+ <PINMUX_GPIO32__FUNC_I1_URXD0>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pmic {
+ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+ memory-region = <&scp_mem_reserved>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+ status = "okay";
+};
+
+&u3phy0 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
+
+&xhci1 {
+ status = "okay";
+};
+
+&xhci2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+ compatible = "mediatek,mt8188";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x000>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x400>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x500>;
+ enable-method = "psci";
+ clock-frequency = <2000000000>;
+ capacity-dmips-mhz = <282>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x600>;
+ enable-method = "psci";
+ clock-frequency = <2600000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x700>;
+ enable-method = "psci";
+ clock-frequency = <2600000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+
+ core4 {
+ cpu = <&cpu4>;
+ };
+
+ core5 {
+ cpu = <&cpu5>;
+ };
+
+ core6 {
+ cpu = <&cpu6>;
+ };
+
+ core7 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_off_l: cpu-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010000>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <95>;
+ min-residency-us = <580>;
+ };
+
+ cpu_off_b: cpu-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010000>;
+ local-timer-stop;
+ entry-latency-us = <45>;
+ exit-latency-us = <140>;
+ min-residency-us = <740>;
+ };
+
+ cluster_off_l: cluster-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010010>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <155>;
+ min-residency-us = <840>;
+ };
+
+ cluster_off_b: cluster-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010010>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ cache-unified;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <262144>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&l3_0>;
+ cache-unified;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-size = <2097152>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
+ cache-unified;
+ };
+ };
+
+ clk13m: oscillator-13m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13000000>;
+ clock-output-names = "clk13m";
+ };
+
+ clk26m: oscillator-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "clk32k";
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a78 {
+ compatible = "arm,cortex-a78-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-frequency = <13000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu6 &cpu7>;
+ };
+ };
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8188-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg_ao: syscon@10001000 {
+ compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt8188-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8188-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11c00000 0 0x1000>,
+ <0 0x11e10000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11ea0000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+ "iocfg_lm", "iocfg_rt", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 176>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8188-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ mediatek,disable-extrst;
+ #reset-cells = <1>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8188-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk13m>;
+ };
+
+ pwrap: pwrap@10024000 {
+ compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+ reg = <0 0x10024000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+ <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+ clock-names = "spi", "wrap";
+ };
+
+ scp: scp@10500000 {
+ compatible = "mediatek,mt8188-scp";
+ reg = <0 0x10500000 0 0x100000>,
+ <0 0x10720000 0 0xe0000>;
+ reg-names = "sram", "cfg";
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ adsp_audio26m: clock-controller@10b91100 {
+ compatible = "mediatek,mt8188-adsp-audio26m";
+ reg = <0 0x10b91100 0 0x100>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@11001100 {
+ compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001100 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11001200 {
+ compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001200 0 0x100>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11001300 {
+ compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001300 0 0x100>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11001400 {
+ compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11001400 0 0x100>;
+ interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ auxadc: adc@11002000 {
+ compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ pericfg_ao: syscon@11003000 {
+ compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+ reg = <0 0x11003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi1: spi@11010000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11010000 0 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI1>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi2: spi@11012000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11012000 0 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi3: spi@11013000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11013000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI3>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi4: spi@11018000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11018000 0 0x1000>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI4>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi5: spi@11019000 {
+ compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11019000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI5>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ xhci1: usb@11200000 {
+ compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port1 PHY_TYPE_USB2>,
+ <&u3port1 PHY_TYPE_USB3>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+ <&topckgen CLK_TOP_SSUSB_XHCI>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+ <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x10000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+ <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+ clock-names = "source", "hclk", "source_cg", "crypto_clk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11eb0000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11280000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11280000 0 0x1000>,
+ <0 0x10220080 0 0x80>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11281000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11281000 0 0x1000>,
+ <0 0x10220180 0 0x80>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11282000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11282000 0 0x1000>,
+ <0 0x10220280 0 0x80>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ imp_iic_wrap_c: clock-controller@11283000 {
+ compatible = "mediatek,mt8188-imp-iic-wrap-c";
+ reg = <0 0x11283000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ xhci2: usb@112a0000 {
+ compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+ reg = <0 0x112a0000 0 0x1000>,
+ <0 0x112a3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+ <&topckgen CLK_TOP_USB_TOP_3P>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+ <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck";
+ status = "disabled";
+ };
+
+ xhci0: usb@112b0000 {
+ compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+ reg = <0 0x112b0000 0 0x1000>,
+ <0 0x112b3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port0 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+ <&topckgen CLK_TOP_USB_TOP_2P>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+ <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+ wakeup-source;
+ status = "disabled";
+ };
+
+ nor_flash: spi@1132c000 {
+ compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+ reg = <0 0x1132c000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_SPINOR>,
+ <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+ <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+ clock-names = "spi", "sf", "axi";
+ assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11e00000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11e00000 0 0x1000>,
+ <0 0x10220100 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11e01000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11e01000 0 0x1000>,
+ <0 0x10220380 0 0x80>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ imp_iic_wrap_w: clock-controller@11e02000 {
+ compatible = "mediatek,mt8188-imp-iic-wrap-w";
+ reg = <0 0x11e02000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ u3phy0: t-phy@11e30000 {
+ compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11e30000 0x1000>;
+ status = "disabled";
+
+ u2port0: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+ <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ u3phy1: t-phy@11e40000 {
+ compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11e40000 0x1000>;
+ status = "disabled";
+
+ u2port1: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+ <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u3port1: usb-phy@700 {
+ reg = <0x700 0x700>;
+ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+ <&clk26m>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy2: t-phy@11e80000 {
+ compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11e80000 0x1000>;
+ status = "disabled";
+
+ u2port2: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+ <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ i2c5: i2c@11ec0000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11ec0000 0 0x1000>,
+ <0 0x10220480 0 0x80>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@11ec1000 {
+ compatible = "mediatek,mt8188-i2c";
+ reg = <0 0x11ec1000 0 0x1000>,
+ <0 0x10220600 0 0x80>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ imp_iic_wrap_en: clock-controller@11ec2000 {
+ compatible = "mediatek,mt8188-imp-iic-wrap-en";
+ reg = <0 0x11ec2000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mfgcfg: clock-controller@13fbf000 {
+ compatible = "mediatek,mt8188-mfgcfg";
+ reg = <0 0x13fbf000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vppsys0: clock-controller@14000000 {
+ compatible = "mediatek,mt8188-vppsys0";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ wpesys: clock-controller@14e00000 {
+ compatible = "mediatek,mt8188-wpesys";
+ reg = <0 0x14e00000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ wpesys_vpp0: clock-controller@14e02000 {
+ compatible = "mediatek,mt8188-wpesys-vpp0";
+ reg = <0 0x14e02000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vppsys1: clock-controller@14f00000 {
+ compatible = "mediatek,mt8188-vppsys1";
+ reg = <0 0x14f00000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8188-imgsys";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys1_dip_top: clock-controller@15110000 {
+ compatible = "mediatek,mt8188-imgsys1-dip-top";
+ reg = <0 0x15110000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys1_dip_nr: clock-controller@15130000 {
+ compatible = "mediatek,mt8188-imgsys1-dip-nr";
+ reg = <0 0x15130000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys_wpe1: clock-controller@15220000 {
+ compatible = "mediatek,mt8188-imgsys-wpe1";
+ reg = <0 0x15220000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipesys: clock-controller@15330000 {
+ compatible = "mediatek,mt8188-ipesys";
+ reg = <0 0x15330000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys_wpe2: clock-controller@15520000 {
+ compatible = "mediatek,mt8188-imgsys-wpe2";
+ reg = <0 0x15520000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys_wpe3: clock-controller@15620000 {
+ compatible = "mediatek,mt8188-imgsys-wpe3";
+ reg = <0 0x15620000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8188-camsys";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_rawa: clock-controller@1604f000 {
+ compatible = "mediatek,mt8188-camsys-rawa";
+ reg = <0 0x1604f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_yuva: clock-controller@1606f000 {
+ compatible = "mediatek,mt8188-camsys-yuva";
+ reg = <0 0x1606f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_rawb: clock-controller@1608f000 {
+ compatible = "mediatek,mt8188-camsys-rawb";
+ reg = <0 0x1608f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_yuvb: clock-controller@160af000 {
+ compatible = "mediatek,mt8188-camsys-yuvb";
+ reg = <0 0x160af000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ccusys: clock-controller@17200000 {
+ compatible = "mediatek,mt8188-ccusys";
+ reg = <0 0x17200000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys_soc: clock-controller@1800f000 {
+ compatible = "mediatek,mt8188-vdecsys-soc";
+ reg = <0 0x1800f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: clock-controller@1802f000 {
+ compatible = "mediatek,mt8188-vdecsys";
+ reg = <0 0x1802f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: clock-controller@1a000000 {
+ compatible = "mediatek,mt8188-vencsys";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&spi5_pins>;
- cr50@0 {
+ tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8192-power.h>
#include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8192";
next-level-cache = <&l2_0>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
+ #cooling-cells = <2>;
};
cpu1: cpu@100 {
next-level-cache = <&l2_0>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
+ #cooling-cells = <2>;
};
cpu2: cpu@200 {
next-level-cache = <&l2_0>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
+ #cooling-cells = <2>;
};
cpu3: cpu@300 {
next-level-cache = <&l2_0>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
+ #cooling-cells = <2>;
};
cpu4: cpu@400 {
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu5: cpu@500 {
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu6: cpu@600 {
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu7: cpu@700 {
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
cpu-map {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8192-lvts-ap";
+ reg = <0 0x1100b000 0 0xc00>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
+ svs: svs@1100bc00 {
+ compatible = "mediatek,mt8192-svs";
+ reg = <0 0x1100bc00 0 0x400>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+ nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+ resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+ reset-names = "svs_rst";
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
status = "disabled";
};
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8192-lvts-mcu";
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ #thermal-sensor-cells = <1>;
+ };
+
efuse: efuse@11c10000 {
compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
reg = <0 0x11c10000 0 0x1000>;
power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+ trips {
+ cpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+ trips {
+ cpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+ trips {
+ cpu2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+ trips {
+ cpu3_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+ trips {
+ cpu4_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+ trips {
+ cpu5_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+ trips {
+ cpu6_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+ trips {
+ cpu7_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ vpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+ trips {
+ vpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ vpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+ trips {
+ vpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ vpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+ trips {
+ gpu0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+ trips {
+ gpu1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ infra-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+ trips {
+ infra_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ infra_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+ trips {
+ cam_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+ trips {
+ md0_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+ trips {
+ md1_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ md2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+ trips {
+ md2_alert: trip-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ md2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
regulator-boot-on;
};
+ /* Murata NCP03WF104F05RL */
+ tboard_thermistor1: thermal-sensor-t1 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&auxadc 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-10000) 1553
+ (-5000) 1485
+ 0 1406
+ 5000 1317
+ 10000 1219
+ 15000 1115
+ 20000 1007
+ 25000 900
+ 30000 796
+ 35000 697
+ 40000 605
+ 45000 523
+ 50000 449
+ 55000 384
+ 60000 327
+ 65000 279
+ 70000 237
+ 75000 202
+ 80000 172
+ 85000 147
+ 90000 125
+ 95000 107
+ 100000 92
+ 105000 79
+ 110000 68
+ 115000 59
+ 120000 51
+ 125000 44>;
+ };
+
+ tboard_thermistor2: thermal-sensor-t2 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&auxadc 1>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-10000) 1553
+ (-5000) 1485
+ 0 1406
+ 5000 1317
+ 10000 1219
+ 15000 1115
+ 20000 1007
+ 25000 900
+ 30000 796
+ 35000 697
+ 40000 605
+ 45000 523
+ 50000 449
+ 55000 384
+ 60000 327
+ 65000 279
+ 70000 237
+ 75000 202
+ 80000 172
+ 85000 147
+ 90000 125
+ 95000 107
+ 100000 92
+ 105000 79
+ 110000 68
+ 115000 59
+ 120000 51
+ 125000 44>;
+ };
+
usb_vbus: regulator-5v0-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
memory-region = <&afe_mem>;
};
+&auxadc {
+ status = "okay";
+};
+
&dp_intf0 {
status = "okay";
};
};
+&mfg0 {
+ domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+ domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
&mmc0 {
status = "okay";
/* for GPU SRAM */
&mt6359_vsram_others_ldo_reg {
- regulator-always-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
};
regulator-enable-ramp-delay = <256>;
regulator-ramp-delay = <6250>;
regulator-allowed-modes = <0 1 2>;
- regulator-always-on;
+ };
+ };
+ };
+};
+
+&thermal_zones {
+ soc-area-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&tboard_thermistor1>;
+
+ trips {
+ trip-crit {
+ temperature = <84000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ pmic-area-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tboard_thermistor2>;
+
+ trips {
+ trip-crit {
+ temperature = <84000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
&xhci0 {
status = "okay";
+ rx-fifo-depth = <3072>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&usb_vbus>;
};
&xhci1 {
status = "okay";
+ rx-fifo-depth = <3072>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&usb_vbus>;
};
compatible = "mediatek,mt6360";
reg = <0x34>;
interrupt-controller;
+ #interrupt-cells = <1>;
interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "IRQB";
#size-cells = <0>;
#power-domain-cells = <1>;
- power-domain@MT8195_POWER_DOMAIN_MFG1 {
+ mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
reg = <MT8195_POWER_DOMAIN_MFG1>;
clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
<&topckgen CLK_TOP_MFG_CORE_TMP>;
lvts_ap: thermal-sensor@1100b000 {
compatible = "mediatek,mt8195-lvts-ap";
- reg = <0 0x1100b000 0 0x1000>;
+ reg = <0 0x1100b000 0 0xc00>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
#thermal-sensor-cells = <1>;
};
+ svs: svs@1100bc00 {
+ compatible = "mediatek,mt8195-svs";
+ reg = <0 0x1100bc00 0 0x400>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+ nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+ resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+ reset-names = "svs_rst";
+ };
+
disp_pwm0: pwm@1100e000 {
compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
lvts_efuse_data2: lvts2-calib@1d0 {
reg = <0x1d0 0x38>;
};
+ svs_calib_data: svs-calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy2: t-phy@11c40000 {
};
};
+ mipi_tx0: dsi-phy@11c80000 {
+ compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c80000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ mipi_tx1: dsi-phy@11c90000 {
+ compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c90000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx1_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
i2c5: i2c@11d00000 {
compatible = "mediatek,mt8195-i2c",
"mediatek,mt8192-i2c";
#clock-cells = <1>;
};
+ dma-controller@14001000 {
+ compatible = "mediatek,mt8195-mdp3-rdma";
+ reg = <0 0x14001000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+ <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+ mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+ <&gce1 13 CMDQ_THR_PRIO_1>,
+ <&gce1 14 CMDQ_THR_PRIO_1>,
+ <&gce1 21 CMDQ_THR_PRIO_1>,
+ <&gce1 22 CMDQ_THR_PRIO_1>;
+ #dma-cells = <1>;
+ };
+
+ display@14002000 {
+ compatible = "mediatek,mt8195-mdp3-fg";
+ reg = <0 0x14002000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+ };
+
+ display@14003000 {
+ compatible = "mediatek,mt8195-mdp3-stitch";
+ reg = <0 0x14003000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_STITCH>;
+ };
+
+ display@14004000 {
+ compatible = "mediatek,mt8195-mdp3-hdr";
+ reg = <0 0x14004000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+ };
+
+ display@14005000 {
+ compatible = "mediatek,mt8195-mdp3-aal";
+ reg = <0 0x14005000 0 0x1000>;
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ };
+
+ display@14006000 {
+ compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+ reg = <0 0x14006000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+ <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+ };
+
+ display@14007000 {
+ compatible = "mediatek,mt8195-mdp3-tdshp";
+ reg = <0 0x14007000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+ };
+
+ display@14008000 {
+ compatible = "mediatek,mt8195-mdp3-color";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ };
+
+ display@14009000 {
+ compatible = "mediatek,mt8195-mdp3-ovl";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+ };
+
+ display@1400a000 {
+ compatible = "mediatek,mt8195-mdp3-padding";
+ reg = <0 0x1400a000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_PADDING>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ };
+
+ display@1400b000 {
+ compatible = "mediatek,mt8195-mdp3-tcc";
+ reg = <0 0x1400b000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+ };
+
+ dma-controller@1400c000 {
+ compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+ reg = <0 0x1400c000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+ <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+ clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+ iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+ #dma-cells = <1>;
+ };
+
mutex@1400f000 {
compatible = "mediatek,mt8195-vpp-mutex";
reg = <0 0x1400f000 0 0x1000>;
power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
};
+ display@14f06000 {
+ compatible = "mediatek,mt8195-mdp3-split";
+ reg = <0 0x14f06000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+ <&vppsys1 CLK_VPP1_HDMI_META>,
+ <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f07000 {
+ compatible = "mediatek,mt8195-mdp3-tcc";
+ reg = <0 0x14f07000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+ };
+
+ dma-controller@14f08000 {
+ compatible = "mediatek,mt8195-mdp3-rdma";
+ reg = <0 0x14f08000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+ iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
+ dma-controller@14f09000 {
+ compatible = "mediatek,mt8195-mdp3-rdma";
+ reg = <0 0x14f09000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+ iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
+ dma-controller@14f0a000 {
+ compatible = "mediatek,mt8195-mdp3-rdma";
+ reg = <0 0x14f0a000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+ iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
+ display@14f0b000 {
+ compatible = "mediatek,mt8195-mdp3-fg";
+ reg = <0 0x14f0b000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+ };
+
+ display@14f0c000 {
+ compatible = "mediatek,mt8195-mdp3-fg";
+ reg = <0 0x14f0c000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+ };
+
+ display@14f0d000 {
+ compatible = "mediatek,mt8195-mdp3-fg";
+ reg = <0 0x14f0d000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+ };
+
+ display@14f0e000 {
+ compatible = "mediatek,mt8195-mdp3-hdr";
+ reg = <0 0x14f0e000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+ };
+
+ display@14f0f000 {
+ compatible = "mediatek,mt8195-mdp3-hdr";
+ reg = <0 0x14f0f000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+ };
+
+ display@14f10000 {
+ compatible = "mediatek,mt8195-mdp3-hdr";
+ reg = <0 0x14f10000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+ };
+
+ display@14f11000 {
+ compatible = "mediatek,mt8195-mdp3-aal";
+ reg = <0 0x14f11000 0 0x1000>;
+ interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f12000 {
+ compatible = "mediatek,mt8195-mdp3-aal";
+ reg = <0 0x14f12000 0 0x1000>;
+ interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f13000 {
+ compatible = "mediatek,mt8195-mdp3-aal";
+ reg = <0 0x14f13000 0 0x1000>;
+ interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f14000 {
+ compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+ reg = <0 0x14f14000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+ };
+
+ display@14f15000 {
+ compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+ reg = <0 0x14f15000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+ };
+
+ display@14f16000 {
+ compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+ reg = <0 0x14f16000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+ };
+
+ display@14f17000 {
+ compatible = "mediatek,mt8195-mdp3-tdshp";
+ reg = <0 0x14f17000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+ };
+
+ display@14f18000 {
+ compatible = "mediatek,mt8195-mdp3-tdshp";
+ reg = <0 0x14f18000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+ };
+
+ display@14f19000 {
+ compatible = "mediatek,mt8195-mdp3-tdshp";
+ reg = <0 0x14f19000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+ };
+
+ display@14f1a000 {
+ compatible = "mediatek,mt8195-mdp3-merge";
+ reg = <0 0x14f1a000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f1b000 {
+ compatible = "mediatek,mt8195-mdp3-merge";
+ reg = <0 0x14f1b000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f1c000 {
+ compatible = "mediatek,mt8195-mdp3-color";
+ reg = <0 0x14f1c000 0 0x1000>;
+ interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f1d000 {
+ compatible = "mediatek,mt8195-mdp3-color";
+ reg = <0 0x14f1d000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+ interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f1e000 {
+ compatible = "mediatek,mt8195-mdp3-color";
+ reg = <0 0x14f1e000 0 0x1000>;
+ interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f1f000 {
+ compatible = "mediatek,mt8195-mdp3-ovl";
+ reg = <0 0x14f1f000 0 0x1000>;
+ interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+ };
+
+ display@14f20000 {
+ compatible = "mediatek,mt8195-mdp3-padding";
+ reg = <0 0x14f20000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f21000 {
+ compatible = "mediatek,mt8195-mdp3-padding";
+ reg = <0 0x14f21000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ display@14f22000 {
+ compatible = "mediatek,mt8195-mdp3-padding";
+ reg = <0 0x14f22000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ };
+
+ dma-controller@14f23000 {
+ compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+ reg = <0 0x14f23000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+ iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
+ dma-controller@14f24000 {
+ compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+ reg = <0 0x14f24000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+ iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
+ dma-controller@14f25000 {
+ compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+ reg = <0 0x14f25000 0 0x1000>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+ mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+ <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+ clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+ iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+ #dma-cells = <1>;
+ };
+
imgsys: clock-controller@15000000 {
compatible = "mediatek,mt8195-imgsys";
reg = <0 0x15000000 0 0x1000>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
};
+ dsi0: dsi@1c008000 {
+ compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+ reg = <0 0x1c008000 0 0x1000>;
+ interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+ clocks = <&vdosys0 CLK_VDO0_DSI0>,
+ <&vdosys0 CLK_VDO0_DSI0_DSI>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
dsc0: dsc@1c009000 {
compatible = "mediatek,mt8195-disp-dsc";
reg = <0 0x1c009000 0 0x1000>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
};
+ dsi1: dsi@1c012000 {
+ compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+ reg = <0 0x1c012000 0 0x1000>;
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+ clocks = <&vdosys0 CLK_VDO0_DSI1>,
+ <&vdosys0 CLK_VDO0_DSI1_DSI>,
+ <&mipi_tx1>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx1>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
merge0: merge@1c014000 {
compatible = "mediatek,mt8195-disp-merge";
reg = <0 0x1c014000 0 0x1000>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
};
- vdo1_rdma0: rdma@1c104000 {
+ vdo1_rdma0: dma-controller@1c104000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c104000 0 0x1000>;
interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma1: rdma@1c105000 {
+ vdo1_rdma1: dma-controller@1c105000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c105000 0 0x1000>;
interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma2: rdma@1c106000 {
+ vdo1_rdma2: dma-controller@1c106000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c106000 0 0x1000>;
interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma3: rdma@1c107000 {
+ vdo1_rdma3: dma-controller@1c107000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c107000 0 0x1000>;
interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma4: rdma@1c108000 {
+ vdo1_rdma4: dma-controller@1c108000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c108000 0 0x1000>;
interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma5: rdma@1c109000 {
+ vdo1_rdma5: dma-controller@1c109000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c109000 0 0x1000>;
interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma6: rdma@1c10a000 {
+ vdo1_rdma6: dma-controller@1c10a000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c10a000 0 0x1000>;
interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+ #dma-cells = <1>;
};
- vdo1_rdma7: rdma@1c10b000 {
+ vdo1_rdma7: dma-controller@1c10b000 {
compatible = "mediatek,mt8195-vdo1-rdma";
reg = <0 0x1c10b000 0 0x1000>;
interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+ #dma-cells = <1>;
};
merge1: vpp-merge@1c10c000 {
touchscreen@5d {
compatible = "goodix,gt9271";
reg = <0x5d>;
- interrupt-parent = <&pio>;
- interrupts = <132 IRQ_TYPE_EDGE_RISING>;
+ interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
AVDD28-supply = <&mt6360_ldo1>;
};
&pmic {
- interrupt-parent = <&pio>;
- interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
};
&scp {
status = "okay";
phy-handle = <&mgbe0_phy>;
- phy-mode = "usxgmii";
+ phy-mode = "10gbase-r";
mdio {
#address-cells = <1>;
<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
interconnect-names = "dma-mem", "write";
iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
- power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
status = "disabled";
};
<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
interconnect-names = "dma-mem", "write";
iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
- power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
status = "disabled";
};
<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
interconnect-names = "dma-mem", "write";
iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
- power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
status = "disabled";
};
};
};
+&usb {
+ status = "okay";
+};
+
+&usb_dwc {
+ dr_mode = "host";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
&xo_board_clk {
clock-frequency = <24000000>;
};
* Copyright (c) 2023 The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ operating-points-v2 = <&cpu_opp_table>;
};
CPU1: cpu@1 {
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ operating-points-v2 = <&cpu_opp_table>;
};
L2_0: l2-cache {
};
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq5018", "qcom,scm";
#size-cells = <2>;
ranges;
+ bootloader@4a800000 {
+ reg = <0x0 0x4a800000 0x0 0x200000>;
+ no-map;
+ };
+
+ sbl@4aa00000 {
+ reg = <0x0 0x4aa00000 0x0 0x100000>;
+ no-map;
+ };
+
+ smem@4ab00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x4ab00000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
tz_region: tz@4ac00000 {
reg = <0x0 0x4ac00000 0x0 0x200000>;
no-map;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ usbphy0: phy@5b000 {
+ compatible = "qcom,ipq5018-usb-hsphy";
+ reg = <0x0005b000 0x120>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5018-tlmm";
reg = <0x01000000 0x300000>;
#power-domain-cells = <1>;
};
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
sdhc_1: mmc@7804000 {
compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
reg = <0x7804000 0x1000>;
status = "disabled";
};
+ blsp_dma: dma-controller@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x1d000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
status = "disabled";
};
+ blsp1_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x078b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ usb: usb@8af8800 {
+ compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ resets = <&gcc GCC_USB0_BCR>;
+
+ qcom,select-utmi-as-pipe-clk;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ usb_dwc: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x08a00000 0xe000>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phy-names = "usb2-phy";
+ phys = <&usbphy0>;
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
clocks = <&sleep_clk>;
};
+ apcs_glb: mailbox@b111000 {
+ compatible = "qcom,ipq5018-apcs-apps-global",
+ "qcom,ipq6018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
+ #mbox-cells = <1>;
+ };
+
+ a53pll: clock@b116000 {
+ compatible = "qcom,ipq5018-a53pll";
+ reg = <0x0b116000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo_board_clk>;
+ clock-names = "xo";
+ };
+
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "ipq5332.dtsi"
/ {
pinctrl-names = "default";
led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
&blsp1_i2c1 {
- clock-frequency = <400000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_i2c1 {
- clock-frequency = <400000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_i2c1 {
- clock-frequency = <400000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
};
cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
opp-shared;
+ nvmem-cells = <&cpu_speed_bin>;
- opp-1488000000 {
- opp-hz = /bits/ 64 <1488000000>;
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
};
reg = <0x000a4000 0x721>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@1d {
+ reg = <0x1d 0x2>;
+ bits = <7 2>;
+ };
};
rng: rng@e3000 {
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
- clocks = <&a53pll>, <&xo_board>;
- clock-names = "pll", "xo";
+ clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
};
cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&cpu_speed_bin>;
opp-shared;
opp-864000000 {
opp-hz = /bits/ 64 <864000000>;
opp-microvolt = <725000>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <787500>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
opp-microvolt = <925000>;
+ opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1062500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
ssphy_0: ssphy@78000 {
compatible = "qcom,ipq6018-qmp-usb3-phy";
- reg = <0x0 0x00078000 0x0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0x0 0x00078000 0x0 0x1000>;
clocks = <&gcc GCC_USB0_AUX_CLK>,
- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&xo>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "gcc_usb0_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB0_PHY_BCR>,
<&gcc GCC_USB3PHY_0_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
+ reset-names = "phy",
+ "phy_phy";
- usb0_ssphy: phy@78200 {
- reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
- <0x0 0x00078400 0x0 0x200>, /* Rx */
- <0x0 0x00078800 0x0 0x1f8>, /* PCS */
- <0x0 0x00078600 0x0 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "gcc_usb0_pipe_clk_src";
- };
+ status = "disabled";
};
qusb_phy_0: qusb@79000 {
reg = <0x0 0x000a4000 0x0 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@135 {
+ reg = <0x135 0x1>;
+ bits = <7 1>;
+ };
};
prng: qrng@e3000 {
qcom,ee = <0>;
};
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78af000 0x0 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0 0x078b1000 0x0 0x200>;
status = "disabled";
};
+ blsp1_uart4: serial@78b2000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b2000 0x0 0x200>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart5: serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x78b3000 0x0 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_uart6: serial@78b4000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x0 0x078b4000 0x0 0x200>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
status = "disabled";
};
+ blsp1_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x078b9000 0x0 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
blsp1_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
assigned-clock-rates = <133330000>,
<133330000>,
- <20000000>;
+ <24000000>;
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x08a00000 0x0 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_0>, <&usb0_ssphy>;
+ phys = <&qusb_phy_0>, <&ssphy_0>;
phy-names = "usb2-phy", "usb3-phy";
clocks = <&xo>;
clock-names = "ref";
compatible = "qcom,ipq6018-apcs-apps-global";
reg = <0x0 0x0b111000 0x0 0x1000>;
#clock-cells = <1>;
- clocks = <&a53pll>, <&xo>;
- clock-names = "pll", "xo";
+ clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
};
};
- pcie0: pci@20000000 {
+ pcie0: pcie@20000000 {
compatible = "qcom,pcie-ipq6018";
reg = <0x0 0x20000000 0x0 0xf1d>,
<0x0 0x20000f20 0x0 0xa8>,
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
ssphy_1: phy@58000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00058000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00058000 0x1000>;
clocks = <&gcc GCC_USB1_AUX_CLK>,
- <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&xo>,
+ <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB1_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3phy_1_cc_pipe_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB1_PHY_BCR>,
- <&gcc GCC_USB3PHY_1_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
+ <&gcc GCC_USB3PHY_1_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb1_ssphy: phy@58200 {
- reg = <0x00058200 0x130>, /* Tx */
- <0x00058400 0x200>, /* Rx */
- <0x00058800 0x1f8>, /* PCS */
- <0x00058600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB1_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_1_cc_pipe_clk";
- };
+ status = "disabled";
};
qusb_phy_1: phy@59000 {
ssphy_0: phy@78000 {
compatible = "qcom,ipq8074-qmp-usb3-phy";
- reg = <0x00078000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00078000 0x1000>;
clocks = <&gcc GCC_USB0_AUX_CLK>,
- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
- <&xo>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&xo>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3phy_0_cc_pipe_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB0_PHY_BCR>,
- <&gcc GCC_USB3PHY_0_PHY_BCR>;
- reset-names = "phy","common";
- status = "disabled";
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb0_ssphy: phy@78200 {
- reg = <0x00078200 0x130>, /* Tx */
- <0x00078400 0x200>, /* Rx */
- <0x00078800 0x1f8>, /* PCS */
- <0x00078600 0x044>; /* PCS misc */
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3phy_0_cc_pipe_clk";
- };
+ status = "disabled";
};
qusb_phy_0: phy@79000 {
gcc: gcc@1800000 {
compatible = "qcom,gcc-ipq8074";
reg = <0x01800000 0x80000>;
- clocks = <&xo>, <&sleep_clk>;
- clock-names = "xo", "sleep_clk";
+ clocks = <&xo>,
+ <&sleep_clk>,
+ <&pcie_qmp0>,
+ <&pcie_qmp1>;
+ clock-names = "xo",
+ "sleep_clk",
+ "pcie0_pipe",
+ "pcie1_pipe";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
};
sdhc_1: mmc@7824900 {
- compatible = "qcom,sdhci-msm-v4";
+ compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
reg = <0x7824900 0x500>, <0x7824000 0x800>;
reg-names = "hc", "core";
status = "disabled";
};
+ blsp1_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
blsp1_i2c5: i2c@78b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_0>, <&usb0_ssphy>;
+ phys = <&qusb_phy_0>, <&ssphy_0>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&qusb_phy_1>, <&usb1_ssphy>;
+ phys = <&qusb_phy_1>, <&ssphy_1>;
phy-names = "usb2-phy", "usb3-phy";
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
compatible = "qcom,ipq8074-apcs-apps-global",
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
- clocks = <&a53pll>, <&xo>;
- clock-names = "pll", "xo";
+ clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
#clock-cells = <1>;
#mbox-cells = <1>;
};
};
- pcie1: pci@10000000 {
+ pcie1: pcie@10000000 {
compatible = "qcom,pcie-ipq8074";
reg = <0x10000000 0xf1d>,
<0x10000f20 0xa8>,
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142
+ interrupt-map = <0 0 0 1 &intc 0 0 142
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143
+ <0 0 0 2 &intc 0 0 143
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144
+ <0 0 0 3 &intc 0 0 144
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145
+ <0 0 0 4 &intc 0 0 145
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
status = "disabled";
};
- pcie0: pci@20000000 {
+ pcie0: pcie@20000000 {
compatible = "qcom,pcie-ipq8074-gen3";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
+ interrupt-map = <0 0 0 1 &intc 0 0 75
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
+ <0 0 0 2 &intc 0 0 78
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
+ <0 0 0 3 &intc 0 0 79
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
+ <0 0 0 4 &intc 0 0 83
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ regulator_fixed_3p3: s3300 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "fixed_3p3";
+ };
+
+ regulator_fixed_0p925: s0925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "fixed_0p925";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
+};
+
+&blsp1_spi0 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&blsp1_uart2 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq9574_s1: s1 {
+ /*
+ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+ * During regulator registration, kernel not knowing the initial voltage,
+ * considers it as zero and brings up the regulators with minimum supported voltage.
+ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+ * the regulators are brought up with 725mV which is sufficient for all the
+ * corner parts to operate at 800MHz
+ */
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1075000>;
+ };
+
+ mp5496_l2: l2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ spi_0_pins: spi-0-state {
+ pins = "gpio11", "gpio12", "gpio13", "gpio14";
+ function = "blsp0_spi";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&usb_0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+ vdda-pll-supply = <&mp5496_l2>;
+ vdda-phy-supply = <®ulator_fixed_0p925>;
+
+ status = "okay";
+};
+
+&usb_0_qusbphy {
+ vdd-supply = <®ulator_fixed_0p925>;
+ vdda-pll-supply = <&mp5496_l2>;
+ vdda-phy-dpdm-supply = <®ulator_fixed_3p3>;
+
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <24000000>;
+};
/dts-v1/;
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&blsp1_spi0 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash@0 {
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq9574_s1: s1 {
- /*
- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
- * During regulator registration, kernel not knowing the initial voltage,
- * considers it as zero and brings up the regulators with minimum supported voltage.
- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
- * the regulators are brought up with 725mV which is sufficient for all the
- * corner parts to operate at 800MHz
- */
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1075000>;
- };
- };
};
&sdhc_1 {
status = "okay";
};
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
&tlmm {
sdc_default_state: sdc-default-state {
clk-pins {
bias-pull-down;
};
};
-
- spi_0_pins: spi-0-state {
- pins = "gpio11", "gpio12", "gpio13", "gpio14";
- function = "blsp0_spi";
- drive-strength = <8>;
- bias-disable;
- };
-};
-
-&xo_board_clk {
- clock-frequency = <24000000>;
};
/dts-v1/;
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- regulator_fixed_3p3: s3300 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-name = "fixed_3p3";
- };
-
- regulator_fixed_0p925: s0925 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <925000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-name = "fixed_0p925";
- };
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq9574_s1: s1 {
- /*
- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
- * During regulator registration, kernel not knowing the initial voltage,
- * considers it as zero and brings up the regulators with minimum supported voltage.
- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
- * the regulators are brought up with 725mV which is sufficient for all the
- * corner parts to operate at 800MHz
- */
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1075000>;
- };
-
- mp5496_l2: l2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
};
&sdhc_1 {
status = "okay";
};
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
&tlmm {
sdc_default_state: sdc-default-state {
clk-pins {
};
};
};
-
-&usb_0_dwc3 {
- dr_mode = "host";
-};
-
-&usb_0_qmpphy {
- vdda-pll-supply = <&mp5496_l2>;
- vdda-phy-supply = <®ulator_fixed_0p925>;
-
- status = "okay";
-};
-
-&usb_0_qusbphy {
- vdd-supply = <®ulator_fixed_0p925>;
- vdda-pll-supply = <&mp5496_l2>;
- vdda-phy-dpdm-supply = <®ulator_fixed_3p3>;
-
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
-};
-
-&xo_board_clk {
- clock-frequency = <24000000>;
-};
/dts-v1/;
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&blsp1_spi0 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash@0 {
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq9574_s1: s1 {
- /*
- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
- * During regulator registration, kernel not knowing the initial voltage,
- * considers it as zero and brings up the regulators with minimum supported voltage.
- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
- * the regulators are brought up with 725mV which is sufficient for all the
- * corner parts to operate at 800MHz
- */
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1075000>;
- };
- };
-};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- spi_0_pins: spi-0-state {
- pins = "gpio11", "gpio12", "gpio13", "gpio14";
- function = "blsp0_spi";
- drive-strength = <8>;
- bias-disable;
- };
-};
-
-&xo_board_clk {
- clock-frequency = <24000000>;
};
/dts-v1/;
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&blsp1_spi0 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash@0 {
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq9574_s1: s1 {
- /*
- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
- * During regulator registration, kernel not knowing the initial voltage,
- * considers it as zero and brings up the regulators with minimum supported voltage.
- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
- * the regulators are brought up with 725mV which is sufficient for all the
- * corner parts to operate at 800MHz
- */
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1075000>;
- };
- };
-};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- spi_0_pins: spi-0-state {
- pins = "gpio11", "gpio12", "gpio13", "gpio14";
- function = "blsp0_spi";
- drive-strength = <8>;
- bias-disable;
- };
-};
-
-&xo_board_clk {
- clock-frequency = <24000000>;
};
/dts-v1/;
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&blsp1_spi0 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash@0 {
- compatible = "micron,n25q128a11", "jedec,spi-nor";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&rpm_requests {
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq9574_s1: s1 {
- /*
- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
- * During regulator registration, kernel not knowing the initial voltage,
- * considers it as zero and brings up the regulators with minimum supported voltage.
- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
- * the regulators are brought up with 725mV which is sufficient for all the
- * corner parts to operate at 800MHz
- */
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1075000>;
- };
- };
-};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- spi_0_pins: spi-0-state {
- pins = "gpio11", "gpio12", "gpio13", "gpio14";
- function = "blsp0_spi";
- drive-strength = <8>;
- bias-disable;
- };
-};
-
-&xo_board_clk {
- clock-frequency = <24000000>;
};
};
cpu_opp_table: opp-table-cpu {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
opp-shared;
+ nvmem-cells = <&cpu_speed_bin>;
opp-936000000 {
opp-hz = /bits/ 64 <936000000>;
opp-microvolt = <725000>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <787500>;
+ opp-supported-hw = <0xf>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <862500>;
+ opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1416000000 {
opp-hz = /bits/ 64 <1416000000>;
opp-microvolt = <862500>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1488000000 {
opp-hz = /bits/ 64 <1488000000>;
opp-microvolt = <925000>;
+ opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <987500>;
+ opp-supported-hw = <0x5>;
clock-latency-ns = <200000>;
};
opp-2208000000 {
opp-hz = /bits/ 64 <2208000000>;
opp-microvolt = <1062500>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
reg = <0x000a4000 0x5a1>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@15 {
+ reg = <0x15 0x2>;
+ bits = <7 2>;
+ };
};
cryptobam: dma-controller@704000 {
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
- clocks = <&a73pll>, <&xo_board_clk>;
- clock-names = "pll", "xo";
+ clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+ clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
/*
* NOTE: The original firmware from Acer can only boot 32-bit kernels.
};
};
+&blsp_i2c4 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+};
+
&blsp_i2c5 {
status = "okay";
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
stdout-path = "serial0";
};
+ reserved-memory {
+ /delete-node/ reserved@86680000;
+ /delete-node/ rmtfs@86700000;
+
+ rmtfs: rmtfs@86680000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x86680000 0x0 0x160000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
};
};
+ reg_headphones_avdd: regulator-headphones-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "headphones_avdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-0 = <&headphones_avdd_default>;
+ pinctrl-names = "default";
+ };
+
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
};
};
-&blsp_uart2 {
+&blsp_i2c3 {
status = "okay";
+
+ headphones: audio-codec@10 {
+ compatible = "asahi-kasei,ak4375";
+ reg = <0x10>;
+ avdd-supply = <®_headphones_avdd>;
+ tvdd-supply = <&pm8916_l6>;
+ pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&headphones_pdn_default>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ };
+
+ speaker_codec_top: audio-codec@34 {
+ compatible = "nxp,tfa9897";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l6>;
+ rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_top_default>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Top";
+ #sound-dai-cells = <0>;
+ };
+
+ speaker_codec_bottom: audio-codec@36 {
+ compatible = "nxp,tfa9897";
+ reg = <0x36>;
+ vddd-supply = <&pm8916_l6>;
+ rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&speaker_bottom_default>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Bottom";
+ #sound-dai-cells = <0>;
+ };
};
&blsp_i2c4 {
};
};
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+ qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
+&q6afedai {
+ dai@18 {
+ reg = <SECONDARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+};
+
&sdhc_1 {
status = "okay";
};
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ /* Add pin switches for speakers to allow disabling them individually */
+ model = "alcatel-idol3";
+ widgets =
+ "Speaker", "Speaker Top",
+ "Speaker", "Speaker Bottom";
+ pin-switches = "Speaker Top", "Speaker Bottom";
+ audio-routing =
+ "Speaker Top", "Speaker Top OUT",
+ "Speaker Bottom", "Speaker Bottom OUT",
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+ };
+ };
+};
+
+&sound_link_backend0 {
+ /* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+ link-name = "Secondary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&headphones>;
+ };
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
status = "okay";
};
+/* Only some of the pins are used */
+&pri_mi2s_default {
+ pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+ pins = "gpio113", "gpio115";
+};
+
&tlmm {
accel_int_default: accel-int-default-state {
pins = "gpio31";
bias-disable;
};
+ headphones_avdd_default: headphones-avdd-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ headphones_pdn_default: headphones-pdn-default-state {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
/*
* The OEM wired an additional GPIO to be asserted so that
* the si-en,sn3190 LED IC works. Since this GPIO is not
bias-disable;
};
+ speaker_bottom_default: speaker-bottom-default-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ speaker_top_default: speaker-top-default-state {
+ pins = "gpio50";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_reset_default: ts-int-reset-default-state {
pins = "gpio13", "gpio100";
function = "gpio";
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,micbias1-ext-cap;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/*
* For some reason, the signed wcnss firmware is not relocatable.
- * It must be loaded at 0x8b600000. All other firmware is relocatable,
- * so place wcnss at the fixed address and then all other firmware
- * regions will be automatically allocated at a fitting place.
+ * It must be loaded at 0x8b600000. Unfortunately, this also means that
+ * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+ *
+ * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+ * working higher address. For some reason the modem firmware does not
+ * boot when placed at 0x8a800000 to 0x8e800000.
*/
reserved-memory {
+ /delete-node/ mpss@86800000;
/delete-node/ wcnss;
wcnss_mem: wcnss@8b600000 {
reg = <0x0 0x8b600000 0x0 0x600000>;
no-map;
};
+
+ mpss_mem: mpss@8e800000 {
+ reg = <0x0 0x8e800000 0x0 0x5000000>;
+ no-map;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4350000>;
+ energy-full-design-microwatt-hours = <9500000>;
+ charge-full-design-microamp-hours = <2500000>;
+
+ ocv-capacity-celsius = <25>;
+ ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+ <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+ <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+ <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+ <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+ <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+ <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+ <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+ <3000000 0>;
};
gpio-keys {
#size-cells = <0>;
vcc-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
led@0 {
reg = <0>;
status = "okay";
};
+&pm8916_bms {
+ status = "okay";
+
+ monitored-battery = <&battery>;
+ power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+ status = "okay";
+
+ monitored-battery = <&battery>;
+
+ qcom,fast-charge-safe-current = <900000>;
+ qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
};
-&pm8916_usbin {
- status = "okay";
-};
-
&pm8916_vib {
status = "okay";
};
non-removable;
};
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS Internal1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS Internal3";
+};
+
&usb {
status = "okay";
dr_mode = "peripheral";
- extcon = <&pm8916_usbin>;
+ extcon = <&pm8916_charger>;
};
&usb_hs_phy {
- extcon = <&pm8916_usbin>;
+ extcon = <&pm8916_charger>;
};
&venus {
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "BQ Aquaris X5 (Longcheer L8910)";
stdout-path = "serial0";
};
+ speaker_amp: audio-amplifier {
+ compatible = "awinic,aw8738";
+ mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+ awinic,mode = <5>;
+ sound-name-prefix = "Speaker Amp";
+
+ pinctrl-0 = <&spk_ext_pa_default>;
+ pinctrl-names = "default";
+ };
+
flash-led-controller {
compatible = "ocs,ocp8110";
enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&status_led_default>;
+ pinctrl-names = "default";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
&blsp_i2c3 {
status = "okay";
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+ qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+ status_led_default: status-led-default-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ bias-disable;
+ output-high;
+ };
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ /*
+ * Provide widgets/pin-switches to allow enabling speaker separately.
+ * The hardware does not provide a way to disable the output via the
+ * headphone jack when the speaker is enabled.
+ */
+ model = "bq-paella";
+ widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ pin-switches = "Speaker";
+ audio-routing =
+ "Speaker", "Speaker Amp OUT",
+ "Speaker Amp IN", "HPH_R",
+ "Headphones", "HPH_L",
+ "Headphones", "HPH_R",
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+ aux-devs = <&speaker_amp>;
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
bias-disable;
};
+ spk_ext_pa_default: spk-ext-pa-default-state {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
usb_id_default: usb-id-default-state {
pins = "gpio110";
function = "gpio";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+ status = "okay";
+};
+
+&bam_dmux {
+ status = "okay";
+};
+
+&bam_dmux_dma {
+ status = "okay";
+};
+
+&lpass {
+ status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+ status = "okay";
+};
+
+&mba_mem {
+ status = "okay";
+};
+
+&mpss {
+ status = "okay";
+};
+
+&mpss_mem {
+ status = "okay";
+};
+
+&pm8916_codec {
+ status = "okay";
+};
+
+&q6afedai {
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
+ qcom,sd-lines = <0 1>;
+ };
+ dai@20 {
+ reg = <TERTIARY_MI2S_TX>;
+ qcom,sd-lines = <0 1>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ direction = <Q6ASM_DAI_RX>;
+ };
+ dai@1 {
+ reg = <1>;
+ direction = <Q6ASM_DAI_TX>;
+ };
+ dai@2 {
+ reg = <2>;
+ direction = <Q6ASM_DAI_RX>;
+ };
+ dai@3 {
+ reg = <3>;
+ direction = <Q6ASM_DAI_RX>;
+ is-compress-dai;
+ };
+};
+
+&sound {
+ compatible = "qcom,msm8916-qdsp6-sndcard";
+ model = "msm8916";
+
+ pinctrl-0 = <&cdc_pdm_default>;
+ pinctrl-1 = <&cdc_pdm_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+
+ frontend0-dai-link {
+ link-name = "MultiMedia1";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ frontend1-dai-link {
+ link-name = "MultiMedia2";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ frontend2-dai-link {
+ link-name = "MultiMedia3";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ frontend3-dai-link {
+ link-name = "MultiMedia4";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
+ };
+
+ sound_link_backend0: backend0-dai-link {
+ link-name = "Primary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+ };
+ };
+
+ sound_link_backend1: backend1-dai-link {
+ link-name = "Tertiary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0-only
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
};
};
+&blsp_i2c1 {
+ status = "okay";
+
+ speaker_codec: audio-codec@34 {
+ compatible = "nxp,tfa9895";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l5>;
+ sound-name-prefix = "Speaker";
+ #sound-dai-cells = <0>;
+ };
+};
+
&blsp_i2c2 {
status = "okay";
status = "okay";
};
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+ dai-link@3 {
+ reg = <MI2S_QUATERNARY>;
+ qcom,playback-sd-lines = <1>;
+ };
+};
+
&mdss {
status = "okay";
};
pinctrl-1 = <&mdss_sleep>;
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
};
+&q6afedai {
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+};
+
&sdhc_1 {
status = "okay";
};
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ model = "samsung-a2015";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec>;
+ };
+ };
+};
+
&usb {
status = "okay";
extcon = <&muic>, <&muic>;
};
};
-&touchkey {
- vcc-supply = <®_touch_key>;
- vdd-supply = <®_key_led>;
-};
-
&accelerometer {
mount-matrix = "0", "1", "0",
"1", "0", "0",
remote-endpoint = <&panel_in>;
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_key_led>;
+};
+
&vibrator {
status = "okay";
};
};
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
®_motor_vdd {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
status = "disabled";
};
+&sound {
+ model = "samsung-gmax"; /* No secondary microphone */
+};
+
&tlmm {
gpio_leds_default: gpio-led-default-state {
pins = "gpio60";
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
};
};
-&blsp_i2c4 {
- status = "okay";
-
- fuelgauge@36 {
- compatible = "maxim,max77849-battery";
- reg = <0x36>;
-
- maxim,rsns-microohm = <10000>;
- maxim,over-heat-temp = <600>;
- maxim,over-volt = <4400>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
- pinctrl-0 = <&fuelgauge_int_default>;
- pinctrl-names = "default";
- };
-};
-
&blsp_i2c2 {
status = "okay";
};
};
+&blsp_i2c4 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max77849-battery";
+ reg = <0x36>;
+
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4400>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&fuelgauge_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
&blsp_uart2 {
status = "okay";
};
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+ dai-link@3 {
+ reg = <MI2S_QUATERNARY>;
+ qcom,playback-sd-lines = <1>;
+ };
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
status = "okay";
};
+&q6afedai {
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+};
+
&sdhc_1 {
status = "okay";
};
status = "okay";
};
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec>;
+ };
+ };
+};
+
&usb {
dr_mode = "peripheral";
extcon = <&pm8916_usbin>;
compatible = "samsung,gt510", "qcom,msm8916";
chassis-type = "tablet";
+ speaker_codec: audio-codec {
+ compatible = "maxim,max98357a";
+ sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ pinctrl-0 = <&audio_sdmode_default>;
+ pinctrl-names = "default";
+ };
+
clk_pwm: pwm {
compatible = "clk-pwm";
#pwm-cells = <2>;
};
};
+&gpu {
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
remote-endpoint = <&panel_in>;
};
+&sound {
+ model = "samsung-gt510";
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+};
+
&tlmm {
+ audio_sdmode_default: audio-sdmode-default-state {
+ pins = "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
buckbooster_en_default: buckbooster-en-default-state {
pins = "gpio51";
function = "gpio";
pinctrl-names = "default";
};
+ i2c-amplifier {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&_i2c_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ speaker_codec: audio-codec@34 {
+ compatible = "nxp,tfa9895";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l5>;
+ sound-name-prefix = "Speaker";
+ #sound-dai-cells = <0>;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
};
};
+&gpu {
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
remote-endpoint = <&panel_in>;
};
+&sound {
+ model = "samsung-a2015";
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+ pinctrl-names = "default", "sleep";
+};
+
&tlmm {
+ amp_i2c_default: amp-i2c-default-state {
+ pins = "gpio55", "gpio56";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
buckbooster_en_default: buckbooster-en-default-state {
pins = "gpio8";
function = "gpio";
bias-disable;
};
+ secondary_mic_default: secondary-mic-default-state {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
tsp_int_default: tsp-int-default-state {
pins = "gpio13";
function = "gpio";
// SPDX-License-Identifier: GPL-2.0-only
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
+&sound {
+ model = "msm8916-1mic";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
extcon = <&muic>, <&muic>;
status = "okay";
status = "disabled";
};
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+};
+
&touchscreen {
/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
};
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
no-1-8-v;
};
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
status = "okay";
extcon = <&muic>, <&muic>;
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
-&led_r {
- gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
};
&button_default {
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
-&led_r {
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
};
&mpss {
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
stdout-path = "serial0";
};
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Speaker Amp";
+ pinctrl-0 = <&speaker_amp_default>;
+ pinctrl-names = "default";
+ };
+
+ /*
+ * This seems to be actually an analog switch that either routes audio
+ * to the headphone jack or nowhere. Given that we need to enable a GPIO
+ * to get sound on headphones, modelling it as simple-audio-amplifier
+ * works just fine.
+ */
+ headphones_switch: audio-switch {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+ sound-name-prefix = "Headphones Switch";
+ pinctrl-0 = <&headphones_switch_default>;
+ pinctrl-names = "default";
+ };
+
flash-led-controller {
compatible = "ocs,ocp8110";
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
#size-cells = <0>;
vcc-supply = <&pm8916_l16>;
+ vio-supply = <&pm8916_l5>;
led@0 {
reg = <0>;
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+ qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
non-removable;
};
+&sound {
+ /*
+ * Provide widgets/pin-switches to allow enabling speaker and headphones
+ * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+ */
+ model = "wt88047";
+ widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ pin-switches = "Speaker", "Headphones";
+ audio-routing =
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "Speaker Amp INL", "HPH_R",
+ "Speaker Amp INR", "HPH_R",
+ "Headphones", "Headphones Switch OUTL",
+ "Headphones", "Headphones Switch OUTR",
+ "Headphones Switch INL", "HPH_L",
+ "Headphones Switch INR", "HPH_R",
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2";
+ aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
bias-pull-up;
};
+ headphones_switch_default: headphones-switch-default-state {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
imu_default: imu-default-state {
pins = "gpio115";
function = "gpio";
bias-disable;
};
+ speaker_amp_default: speaker-amp-default-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
touchscreen_default: touchscreen-default-state {
touchscreen-pins {
pins = "gpio13";
gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
};
-&led_r {
- gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+ gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
};
-&led_b {
- gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+ gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
};
&button_default {
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "qcom,msm8916-bimc";
reg = <0x00400000 0x62000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens: thermal-sensor@4a9000 {
compatible = "qcom,msm8916-pcnoc";
reg = <0x00500000 0x11000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8916-snoc";
reg = <0x00580000 0x14000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
stm: stm@802000 {
label = "hexagon";
+ apr: apr {
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ q6core: service@3 {
+ compatible = "qcom,q6core";
+ reg = <APR_SVC_ADSP_CORE>;
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,smd-channels = "fastrpcsmd-apps-dsp";
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,controlled-remotely;
};
blsp_uart1: serial@78af000 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Huawei Honor 5X / GR5 (2016)";
+ compatible = "huawei,kiwi", "qcom,msm8939";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1600000>;
+ no-map;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <25000>;
+ amstaos,proximity-diodes = <0>;
+
+ pinctrl-0 = <&prox_irq_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@1c {
+ compatible = "cypress,tt21000";
+
+ reg = <0x1c>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ /*
+ * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+ * fixed regulator that is automatically enabled by pm8916_l16.
+ */
+ vdd-supply = <&pm8916_l16>;
+ vddio-supply = <&pm8916_l16>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&pm8916_l8 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio69";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ prox_irq_default: prox-irq-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
/ {
};
+&blsp_i2c2 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&status_led_default>;
+ pinctrl-names = "default";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
&blsp_i2c3 {
status = "okay";
light-sensor@23 {
compatible = "liteon,ltr559";
reg = <0x23>;
+ proximity-near-level = <75>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
status = "okay";
};
+&pm8916_gpios {
+ status_led_default: status-led-default-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <PM8916_GPIO_VPH>;
+ bias-disable;
+ output-high;
+ };
+};
+
&pm8916_mpps {
pwm_out: mpp4-state {
pins = "mpp4";
compatible = "qcom,wcn3620";
};
+&wcnss_mem {
+ status = "okay";
+};
+
&tlmm {
button_backlight_default: button-backlight-default-state {
pins = "gpio17";
/dts-v1/;
#include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
/ {
model = "Samsung Galaxy A7 (2015)";
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ speaker_codec: audio-codec@34 {
+ compatible = "nxp,tfa9895";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l5>;
+ sound-name-prefix = "Speaker";
+ #sound-dai-cells = <0>;
+ };
+};
+
&blsp_i2c5 {
status = "okay";
status = "okay";
};
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+ dai-link@3 {
+ reg = <MI2S_QUATERNARY>;
+ qcom,playback-sd-lines = <1>;
+ };
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
};
+&q6afedai {
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+};
+
&sdhc_1 {
status = "okay";
};
status = "okay";
};
+&sound {
+ model = "samsung-a2015";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec>;
+ };
+ };
+};
+
&usb {
extcon = <&muic>, <&muic>;
status = "okay";
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/thermal/thermal.h>
/ {
bimc: interconnect@400000 {
compatible = "qcom,msm8939-bimc";
reg = <0x00400000 0x62000>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
#interconnect-cells = <1>;
};
pcnoc: interconnect@500000 {
compatible = "qcom,msm8939-pcnoc";
reg = <0x00500000 0x11000>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
#interconnect-cells = <1>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8939-snoc";
reg = <0x00580000 0x14080>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
#interconnect-cells = <1>;
snoc_mm: interconnect-snoc {
compatible = "qcom,msm8939-snoc-mm";
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
- <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
#interconnect-cells = <1>;
};
};
#interrupt-cells = <4>;
};
+ bam_dmux_dma: dma-controller@4044000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x04044000 0x19000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ num-channels = <6>;
+ qcom,num-ees = <1>;
+ qcom,powered-remotely;
+
+ status = "disabled";
+ };
+
mpss: remoteproc@4080000 {
compatible = "qcom,msm8916-mss-pil";
reg = <0x04080000 0x100>, <0x04020000 0x040>;
qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
status = "disabled";
+ bam_dmux: bam-dmux {
+ compatible = "qcom,bam-dmux";
+
+ interrupt-parent = <&hexagon_smsm>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pc", "pc-ack";
+
+ qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+ qcom,smem-state-names = "pc", "pc-ack";
+
+ dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+ dma-names = "tx", "rx";
+
+ status = "disabled";
+ };
+
mba {
memory-region = <&mba_mem>;
};
qcom,remote-pid = <1>;
label = "hexagon";
+
+ apr: apr {
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ q6core: service@3 {
+ compatible = "qcom,q6core";
+ reg = <APR_SVC_ADSP_CORE>;
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
};
};
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,controlled-remotely;
};
blsp_uart1: serial@78af000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ /* Necessary because firmware does not configure this correctly */
+ clock-frequency = <19200000>;
frame@b121000 {
reg = <0x0b121000 0x1000>,
reg = <0x45>;
vcc-supply = <&pm8953_l10>;
+ vio-supply = <&pm8953_l5>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x45>;
vcc-supply = <&pm8953_l10>;
+ vio-supply = <&pm8953_l5>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x45>;
vcc-supply = <&pm8953_l10>;
+ vio-supply = <&pm8953_l5>;
#address-cells = <1>;
#size-cells = <0>;
};
};
- memory {
+ memory@10000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
+ reg = <0 0x10000000 0 0>;
};
pmu {
bias-disable;
};
+ spi_3_default: spi-3-default-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_spi3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_3_sleep: spi-3-sleep-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_5_default: spi-5-default-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_spi5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_5_sleep: spi-5-sleep-state {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_6_default: spi-6-default-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_spi6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi_6_sleep: spi-6-sleep-state {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
wcnss_pin_a: wcnss-active-state {
wcss-wlan2-pins {
apps_iommu: iommu@1e20000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x01e20000 0x20000>;
+ ranges = <0 0x01e20000 0x20000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_APSS_TCU_ASYNC_CLK>;
status = "disabled";
};
+ spi_3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_3_default>;
+ pinctrl-1 = <&spi_3_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
status = "disabled";
};
+ spi_5: spi@7af5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07af5000 0x600>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_5_default>;
+ pinctrl-1 = <&spi_5_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_6: i2c@7af6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af6000 0x600>;
status = "disabled";
};
+ spi_6: spi@7af6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07af6000 0x600>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_6_default>;
+ pinctrl-1 = <&spi_6_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_7: i2c@7af7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af7000 0x600>;
apr {
compatible = "qcom,apr-v2";
qcom,smd-channels = "apr_audio_svc";
- qcom,
apr-domain = <APR_DOMAIN_ADSP>;
+ qcom,domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x80000000 0x0 0x0>;
};
+ etm {
+ compatible = "qcom,coresight-remote-etm";
+
+ out-ports {
+ port {
+ modem_etm_out_funnel_in2: endpoint {
+ remote-endpoint =
+ <&funnel_in2_in_modem_etm>;
+ };
+ };
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
<&pciephy_0>,
<&pciephy_1>,
<&pciephy_2>,
- <&ssusb_phy_0>,
- <&ufsphy_lane 0>,
- <&ufsphy_lane 1>,
- <&ufsphy_lane 2>;
+ <&usb3phy>,
+ <&ufsphy 0>,
+ <&ufsphy 1>,
+ <&ufsphy 2>;
clock-names = "cxo",
"cxo2",
"sleep_clk",
compatible = "qcom,msm8996-bimc";
reg = <0x00408000 0x5a000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8996-cnoc";
reg = <0x00500000 0x1000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@524000 {
compatible = "qcom,msm8996-snoc";
reg = <0x00524000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
a0noc: interconnect@543000 {
compatible = "qcom,msm8996-a1noc";
reg = <0x00562000 0x5000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
};
a2noc: interconnect@583000 {
compatible = "qcom,msm8996-a2noc";
reg = <0x00583000 0x7000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ clock-names = "aggre2_ufs_axi", "ufs_axi";
+ clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_UFS_AXI_CLK>;
};
compatible = "qcom,msm8996-mnoc";
reg = <0x005a4000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
- <&rpmcc RPM_SMD_MMAXI_A_CLK>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
pnoc: interconnect@5c0000 {
compatible = "qcom,msm8996-pnoc";
reg = <0x005c0000 0x3000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
tcsr_mutex: hwlock@740000 {
reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy_lane>;
+ phys = <&ufsphy>;
phy-names = "ufsphy";
power-domains = <&gcc UFS_GDSC>;
ufsphy: phy@627000 {
compatible = "qcom,msm8996-qmp-ufs-phy";
- reg = <0x00627000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00627000 0x1000>;
clocks = <&gcc GCC_UFS_CLKREF_CLK>;
clock-names = "ref";
resets = <&ufshc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufsphy_lane: phy@627400 {
- reg = <0x627400 0x12c>,
- <0x627600 0x200>,
- <0x627c00 0x1b4>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
camss: camss@a34000 {
"handover",
"stop-ack";
- clocks = <&xo_board>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
+ clocks = <&xo_board>;
+ clock-names = "xo";
memory-region = <&slpi_mem>;
<&gcc GCC_MSS_GPLL0_DIV_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
- <&rpmcc RPM_SMD_PCNOC_CLK>,
<&rpmcc RPM_SMD_QDSS_CLK>;
- clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
- "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+ clock-names = "iface",
+ "bus",
+ "mem",
+ "xo",
+ "gpll0_mss",
+ "snoc_axi",
+ "mnoc_axi",
+ "qdss";
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ in-ports {
+ port {
+ funnel_in2_in_modem_etm: endpoint {
+ remote-endpoint =
+ <&modem_etm_out_funnel_in2>;
+ };
+ };
+ };
out-ports {
port {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ phys = <&hsusb_phy1>, <&usb3phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
snps,dis_u2_susphy_quirk;
usb3phy: phy@7410000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x07410000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x07410000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
-
- ssusb_phy_0: phy@7410200 {
- reg = <0x07410200 0x200>,
- <0x07410400 0x130>,
- <0x07410600 0x1a8>;
- #phy-cells = <0>;
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- #clock-cells = <0>;
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- };
+ status = "disabled";
};
hsusb_phy1: phy@7411000 {
<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
reg = <0x01c00000 0x2000>,
<0x1b000000 0xf1d>,
compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x01da4000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy_lanes>;
+ phys = <&ufsphy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_GDSC>;
ufsphy: phy@1da7000 {
compatible = "qcom,msm8998-qmp-ufs-phy";
- reg = <0x01da7000 0x18c>;
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
- ranges;
+ reg = <0x01da7000 0x1000>;
clock-names =
"ref",
reset-names = "ufsphy";
resets = <&ufshc 0>;
- ufsphy_lanes: phy@1da7400 {
- reg = <0x01da7400 0x128>,
- <0x01da7600 0x1fc>,
- <0x01da7c00 0x1dc>,
- <0x01da7800 0x128>,
- <0x01da7a00 0x1fc>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+ status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
px-supply = <&vreg_lvs2a_1p8>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
memory-region = <&slpi_mem>;
cpu = <&CPU4>;
- port {
- etm4_out: endpoint {
- remote-endpoint = <&apss_funnel_in4>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint = <&apss_funnel_in4>;
+ };
};
};
};
cpu = <&CPU5>;
- port {
- etm5_out: endpoint {
- remote-endpoint = <&apss_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint = <&apss_funnel_in5>;
+ };
};
};
};
cpu = <&CPU6>;
- port {
- etm6_out: endpoint {
- remote-endpoint = <&apss_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint = <&apss_funnel_in6>;
+ };
};
};
};
cpu = <&CPU7>;
- port {
- etm7_out: endpoint {
- remote-endpoint = <&apss_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint = <&apss_funnel_in7>;
+ };
};
};
};
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&qusb2phy>, <&usb1_ssphy>;
+ phys = <&qusb2phy>, <&usb3phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
usb3phy: phy@c010000 {
compatible = "qcom,msm8998-qmp-usb3-phy";
- reg = <0x0c010000 0x18c>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x0c010000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_BCR>,
<&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
+ reset-names = "phy",
+ "phy_phy";
- usb1_ssphy: phy@c010200 {
- reg = <0xc010200 0x128>,
- <0xc010400 0x200>,
- <0xc010c00 0x20c>,
- <0xc010600 0x128>,
- <0xc010800 0x200>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
+ status = "disabled";
};
qusb2phy: phy@c012000 {
status = "disabled";
};
- pm7250b_gpios: pinctrl@c000 {
+ pm7250b_gpios: gpio@c000 {
compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
pm8550_pwm: pwm {
compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
- #address-cells = <1>;
- #size-cells = <0>;
#pwm-cells = <2>;
status = "disabled";
&spmi_bus {
- pm8550ve: pmic@5 {
+ pm8550ve: pmic@PMK8550VE_SID {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
- reg = <0x5 SPMI_USID>;
+ reg = <PMK8550VE_SID SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550ve_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
- interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
};
};
+ pm8916_charger: charger@1000 {
+ compatible = "qcom,pm8916-lbc";
+ reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+ reg-names = "chgr", "bat_if", "usb", "misc";
+
+ interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "vbat_det",
+ "fast_chg",
+ "chg_fail",
+ "chg_done",
+ "bat_pres",
+ "temp_ok",
+ "coarse_det",
+ "usb_vbus",
+ "chg_gone",
+ "overtemp";
+
+ status = "disabled";
+ };
+
pm8916_usbin: usb-detect@1300 {
compatible = "qcom,pm8941-misc";
reg = <0x1300>;
};
};
+ pm8916_bms: battery@4000 {
+ compatible = "qcom,pm8916-bms-vm";
+ reg = <0x4000>;
+ interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+ <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+ <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+ <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+ <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+ <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "cv_leave",
+ "cv_enter",
+ "ocv_good",
+ "ocv_thr",
+ "fifo",
+ "state_chg";
+
+ status = "disabled";
+ };
+
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>, <0x6100>;
mode-bootloader = <0x02>;
};
};
-
+
&spmi_bus {
pmk8350: pmic@PMK8350_SID {
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
* Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
*/
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
clocks = <&rpmcc RPM_SMD_CE1_CLK>;
clock-names = "core";
#reset-cells = <1>;
+ interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
};
};
CLUSTER_PD: power-domain-cpu-cluster {
#power-domain-cells = <0>;
+ power-domains = <&mpm>;
domain-idle-states = <&CLUSTER_SLEEP>;
};
};
};
};
};
+
+ mpm: interrupt-controller {
+ compatible = "qcom,mpm";
+ qcom,rpm-msg-ram = <&apss_mpm>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #power-domain-cells = <0>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */
+ <5 296>, /* Soundwire master_irq */
+ <12 422>, /* DWC3 ss_phy_irq */
+ <24 79>, /* Soundwire wake_irq */
+ <86 183>, /* MPM wake, SPMI */
+ <90 260>; /* QUSB2_PHY DP+DM */
+ };
};
reserved_memory: reserved-memory {
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 127>;
+ wakeup-parent = <&mpm>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
+ system_noc: interconnect@1880000 {
+ compatible = "qcom,qcm2290-snoc";
+ reg = <0x0 0x01880000 0x0 0x60200>;
+ #interconnect-cells = <2>;
+
+ qup_virt: interconnect-qup {
+ compatible = "qcom,qcm2290-qup-virt";
+ #interconnect-cells = <2>;
+ };
+
+ mmnrt_virt: interconnect-mmnrt {
+ compatible = "qcom,qcm2290-mmnrt-virt";
+ #interconnect-cells = <2>;
+ };
+
+ mmrt_virt: interconnect-mmrt {
+ compatible = "qcom,qcm2290-mmrt-virt";
+ #interconnect-cells = <2>;
+ };
+ };
+
+ config_noc: interconnect@1900000 {
+ compatible = "qcom,qcm2290-cnoc";
+ reg = <0x0 0x01900000 0x0 0x8200>;
+ #interconnect-cells = <2>;
+ };
+
qfprom@1b44000 {
compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
reg = <0x0 0x01b44000 0x0 0x3000>;
};
};
+ pmu@1b8e300 {
+ compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x01b8e300 0x0 0x600>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+ interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+ &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <(200 * 4 * 1000)>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <(300 * 4 * 1000)>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <(451 * 4 * 1000)>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <(547 * 4 * 1000)>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <(681 * 4 * 1000)>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <(768 * 4 * 1000)>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <(1017 * 4 * 1000)>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <(1353 * 4 * 1000)>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <(1555 * 4 * 1000)>;
+ };
+
+ opp-9 {
+ opp-peak-kBps = <(1804 * 4 * 1000)>;
+ };
+ };
+ };
+
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x01c40000 0x0 0x1100>,
"obsrvr",
"intr",
"cnfg";
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
qcom,ee = <0>;
qcom,channel = <0>;
reg = <0x0 0x04411000 0x0 0x1ff>,
<0x0 0x04410000 0x0 0x8>;
#qcom,sensors = <10>;
- interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
clock-names = "core";
};
+ bimc: interconnect@4480000 {
+ compatible = "qcom,qcm2290-bimc";
+ reg = <0x0 0x04480000 0x0 0x80000>;
+ #interconnect-cells = <2>;
+ };
+
rpm_msg_ram: sram@45f0000 {
- compatible = "qcom,rpm-msg-ram";
+ compatible = "qcom,rpm-msg-ram", "mmio-sram";
reg = <0x0 0x045f0000 0x0 0x7000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x045f0000 0x7000>;
+
+ apss_mpm: sram@1b8 {
+ reg = <0x1b8 0x48>;
+ };
};
sram@4690000 {
resets = <&gcc GCC_SDCC1_BCR>;
power-domains = <&rpmpd QCM2290_VDDCX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
iommus = <&apps_smmu 0xc0 0x0>;
+ interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
qcom,dll-config = <0x000f642c>;
qcom,ddr-config = <0x80040868>;
bus-width = <8>;
status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <250000 133320>;
+ opp-avg-kBps = <102400 65000>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <204800 200000>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <204800 200000>;
+ };
+ };
};
sdhc_2: mmc@4784000 {
power-domains = <&rpmpd QCM2290_VDDCX>;
operating-points-v2 = <&sdhc2_opp_table>;
iommus = <&apps_smmu 0xa0 0x0>;
+ interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <250000 133320>;
+ opp-avg-kBps = <261438 150000>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmpd_opp_svs_plus>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <261438 300000>;
};
};
};
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
pinctrl-0 = <&qup_uart0_default>;
pinctrl-names = "default";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
pinctrl-0 = <&qup_uart4_default>;
pinctrl-names = "default";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
usb: usb@4ef8800 {
compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
reg = <0x0 0x04ef8800 0x0 0x400>;
- interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq";
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ /* TODO: USB<->IPA path */
+ interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
wakeup-source;
#address-cells = <2>;
};
};
+ mdss: display-subsystem@5e00000 {
+ compatible = "qcom,qcm2290-mdss";
+ reg = <0x0 0x05e00000 0x0 0x1000>;
+ reg-names = "mdss";
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+ interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdp: display-controller@5e01000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x0 0x05e01000 0x0 0x8f000>,
+ <0x0 0x05eb0000 0x0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "iface",
+ "core",
+ "lut",
+ "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-256000000 {
+ opp-hz = /bits/ 64 <256000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@5e94000 {
+ compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0 0x05e94000 0x0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+ phys = <&mdss_dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-164000000 {
+ opp-hz = /bits/ 64 <164000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x0 0x05e94400 0x0 0x100>,
+ <0x0 0x05e94500 0x0 0x300>,
+ <0x0 0x05e94800 0x0 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "ref";
+
+ power-domains = <&rpmpd QCM2290_VDDMX>;
+ required-opps = <&rpmpd_opp_nom>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@5f00000 {
+ compatible = "qcom,qcm2290-dispcc";
+ reg = <0x0 0x05f00000 0x0 0x20000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+ clock-names = "bi_tcxo",
+ "bi_tcxo_ao",
+ "gcc_disp_gpll0_clk_src",
+ "gcc_disp_gpll0_div_clk_src",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk";
+ #power-domain-cells = <1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
remoteproc_mpss: remoteproc@6080000 {
compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
reg = <0x0 0x06080000 0x0 0x100>;
#define PM7250B_SID 8
#define PM7250B_SID1 9
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
no-map;
};
- adsp_mem: adsp@86700000 {
- reg = <0x0 0x86700000 0x0 0x2800000>;
- no-map;
- };
-
cdsp_mem: cdsp@88f00000 {
reg = <0x0 0x88f00000 0x0 0x1e00000>;
no-map;
};
- mpss_mem: mpss@8b800000 {
- reg = <0x0 0x8b800000 0x0 0xf600000>;
- no-map;
- };
-
- wpss_mem: wpss@9ae00000 {
- reg = <0x0 0x9ae00000 0x0 0x1900000>;
- no-map;
- };
-
rmtfs_mem: memory@f8500000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xf8500000 0x0 0x600000>;
enable-active-high;
vin-supply = <&vreg_bob>;
};
+
+ thermal-zones {
+ camera-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ chg-skin-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm7250b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm7250b_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-cam-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 4>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
};
&apps_rsc {
};
vreg_l7b: ldo7 {
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <3544000>;
+ /* Constrained for UFS VCC, at least until UFS driver scales voltage */
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
status = "okay";
};
+&pm7250b_adc {
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "charger_skin_therm";
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "conn_therm";
+ };
+};
+
+&pm7250b_adc_tm {
+ status = "okay";
+
+ charger-skin-therm@0 {
+ reg = <0>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ conn-therm@1 {
+ reg = <1>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm7325_gpios {
volume_down_default: volume-down-default-state {
pins = "gpio6";
};
};
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ sdm-skin-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wide-rfc-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pmk8350_rtc {
status = "okay";
};
+&pmk8350_vadc {
+ status = "okay";
+
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_xo_therm";
+ };
+
+ channel@144 {
+ reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_quiet_therm";
+ };
+
+ channel@145 {
+ reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_cam_flash_therm";
+ };
+
+ channel@146 {
+ reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_sdm_skin_therm";
+ };
+
+ channel@147 {
+ reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_wide_rfc_therm";
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+ status = "okay";
+};
+
&sdc2_clk {
drive-strength = <16>;
bias-disable;
};
};
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7b>;
+ vcc-max-microamp = <800000>;
+ /*
+ * Technically l9b enables an eLDO (supplied by s1b) which then powers
+ * VCCQ2 of the UFS.
+ */
+ vccq-supply = <&vreg_l9b>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c>;
+ vdda-pll-supply = <&vreg_l6b>;
+
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
};
status = "okay";
};
+
+&wifi {
+ qcom,ath11k-calibration-variant = "Fairphone_5";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+ compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@80700000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@84300000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@84800000 {
+ reg = <0x0 0x84800000 0x0 0x1900000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@88900000 {
+ reg = <0x0 0x88900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ video_mem: video@8a700000 {
+ reg = <0x0 0x8a700000 0x0 0x700000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8ae00000 {
+ reg = <0x0 0x8ae00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@8b300000 {
+ reg = <0x0 0x8b300000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b310000 {
+ reg = <0x0 0x8b310000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8b31a000 {
+ reg = <0x0 0x8b31a000 0x0 0x2000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0xf600000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted_apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@d0600000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <4350000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+ vdd-l2-l7-supply = <&vreg_bob_3p296>;
+ vdd-l3-supply = <&vreg_s2b_0p876>;
+ vdd-l5-supply = <&vreg_s2b_0p876>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+ vdd-l8-supply = <&vreg_s7b_0p972>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+ vdd-l13-supply = <&vreg_s7b_0p972>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+ vreg_s1b_1p872: smps1 {
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s2b_0p876: smps2 {
+ regulator-min-microvolt = <570070>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7b_0p972: smps7 {
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p272: smps8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p504: ldo3 {
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_0p752: ldo4 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <820000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ reg_l5b_0p752: ldo5 {
+ regulator-min-microvolt = <552000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p952: ldo7 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p504: ldo11 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p751: ldo12 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p53: ldo13 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p08: ldo14 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p765: ldo15 {
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p1: ldo16 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p7: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+ vdd-l10-supply = <&vreg_s7b_0p972>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_2p19: smps1 {
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s2c_0p752: smps2 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s5c_0p752: smps5 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7c_0p752: smps7 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s9c_1p084: smps9 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p62: ldo2 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_2p8: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p62: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p62: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p62: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <35440000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p65: ldo12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p7: ldo13 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&sdhc_1 {
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ vmmc-supply = <&vreg_l7b_2p952>;
+ vqmmc-supply = <&vreg_l19b_1p8>;
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 2>, /* ADSP */
+ <48 4>; /* NFC */
+};
+
+&uart5 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p912>;
+
+ status = "okay";
+};
+
+&wifi {
+ memory-region = <&wlan_fw_mem>;
+};
reg = <0x00400000 0x80000>;
compatible = "qcom,qcs404-bimc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens: thermal-sensor@4a9000 {
reg = <0x00500000 0x15080>;
compatible = "qcom,qcs404-pcnoc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
};
snoc: interconnect@580000 {
reg = <0x00580000 0x23080>;
compatible = "qcom,qcs404-snoc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
remoteproc_cdsp: remoteproc@b00000 {
};
};
- pcie: pci@10000000 {
+ pcie: pcie@10000000 {
compatible = "qcom,pcie-qcs404";
reg = <0x10000000 0xf1d>,
<0x10000f20 0xa8>,
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+ model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+ compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@80700000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@84300000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@84800000 {
+ reg = <0x0 0x84800000 0x0 0x1900000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@88900000 {
+ reg = <0x0 0x88900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ video_mem: video@8a700000 {
+ reg = <0x0 0x8a700000 0x0 0x700000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8ae00000 {
+ reg = <0x0 0x8ae00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@8b300000 {
+ reg = <0x0 0x8b300000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b310000 {
+ reg = <0x0 0x8b310000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8b31a000 {
+ reg = <0x0 0x8b31a000 0x0 0x2000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted_apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@d0600000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <4350000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+ vdd-l2-l7-supply = <&vreg_bob_3p296>;
+ vdd-l3-supply = <&vreg_s2b_0p876>;
+ vdd-l5-supply = <&vreg_s2b_0p876>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+ vdd-l8-supply = <&vreg_s7b_0p972>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+ vdd-l13-supply = <&vreg_s7b_0p972>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+ vreg_s1b_1p872: smps1 {
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s2b_0p876: smps2 {
+ regulator-min-microvolt = <570070>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7b_0p972: smps7 {
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p272: smps8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p504: ldo3 {
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_0p752: ldo4 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <820000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ reg_l5b_0p752: ldo5 {
+ regulator-min-microvolt = <552000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p952: ldo7 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p504: ldo11 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p751: ldo12 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p53: ldo13 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p08: ldo14 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p765: ldo15 {
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p1: ldo16 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p7: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+ vdd-l10-supply = <&vreg_s7b_0p972>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_2p19: smps1 {
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s2c_0p752: smps2 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s5c_0p752: smps5 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vreg_s7c_0p752: smps7 {
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_s9c_1p084: smps9 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p62: ldo2 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_2p8: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p62: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p62: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p62: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <35440000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p65: ldo12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p7: ldo13 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 2>, /* ADSP */
+ <48 4>; /* NFC */
+};
+
+&uart5 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p912>;
+
+ status = "okay";
+};
+
+&wifi {
+ memory-region = <&wlan_fw_mem>;
+};
#power-domain-cells = <1>;
};
+ ecpricc: clock-controller@280000 {
+ compatible = "qcom,qdu1000-ecpricc";
+ reg = <0x0 0x00280000 0x0 0x31c00>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+ <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
gpi_dma0: dma-controller@900000 {
compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0x0 0x900000 0x0 0x60000>;
system-cache-controller@19200000 {
compatible = "qcom,qdu1000-llcc";
reg = <0 0x19200000 0 0xd80000>,
- <0 0x1a200000 0 0x80000>,
- <0 0x221c8128 0 0x4>;
- reg-names = "llcc_base",
- "llcc_broadcast_base",
- "multi_channel_register";
+ <0 0x1a200000 0 0x80000>;
+ reg-names = "llcc0_base",
+ "llcc_broadcast_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
- multi-ch-bit-off = <24 2>;
};
};
stdout-path = "serial0:115200n8";
};
+ clocks {
+ clk40M: can-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <<9611_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
};
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ lt9611_codec: hdmi-bridge@2b {
+ compatible = "lontium,lt9611uxc";
+ reg = <0x2b>;
+ interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_hdmi_out_1p2>;
+ vcc-supply = <<9611_3v3>;
+
+ pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&pm2250_l5>;
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+};
+
&pm2250_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
status = "okay";
};
+&spi5 {
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2518fd";
+ reg = <0>;
+ interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk40M>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vdc_5v>;
+ xceiver-supply = <&vdc_5v>;
+ };
+};
+
&tlmm {
+ lt9611_rst_pin: lt9611-rst-state {
+ pins = "gpio41";
+ function = "gpio";
+ input-disable;
+ output-high;
+ };
+
+ lt9611_irq_pin: lt9611-irq-state {
+ pins = "gpio46";
+ function = "gpio";
+ bias-disable;
+ };
+
sd_det_in_on: sd-det-in-on-state {
pins = "gpio88";
function = "gpio";
status = "okay";
};
+&usb_dwc3 {
+ dr_mode = "host";
+};
+
&usb_hsphy {
vdd-supply = <&pm2250_l12>;
vdda-pll-supply = <&pm2250_l13>;
vdd-1.8-xo-supply = <&pm2250_l13>;
vdd-1.3-rfa-supply = <&pm2250_l10>;
vdd-3.3-ch0-supply = <&pm2250_l22>;
+ qcom,ath10k-calibration-variant = "Thundercomm_RB1";
status = "okay";
};
aliases {
serial0 = &uart4;
+ serial1 = &uart3;
};
chosen {
status = "okay";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/qrb4210/modem.mbn";
+
+ status = "okay";
+};
+
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm6125-regulators";
};
vreg_l8a_0p664: l8 {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <728000>;
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <640000>;
};
vreg_l9a_1p8: l9 {
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
};
vreg_l10a_1p8: l10 {
vreg_l16a_1p3: l16 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
+ regulator-allow-set-load;
};
vreg_l17a_1p3: l17 {
regulator-min-microvolt = <1152000>;
regulator-max-microvolt = <1384000>;
+ regulator-allow-set-load;
};
vreg_l18a_1p232: l18 {
};
vreg_l23a_3p3: l23 {
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-allow-set-load;
};
vreg_l24a_2p96: l24 {
<56 3>, <61 2>, <64 1>,
<68 1>, <72 8>, <96 1>;
+ uart3_default: uart3-default-state {
+ cts-pins {
+ pins = "gpio8";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ rts-pins {
+ pins = "gpio9";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio10";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio11";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart3_sleep: uart3-sleep-state {
+ cts-pins {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ rts-pins {
+ pins = "gpio9";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ tx-pins {
+ pins = "gpio10";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rx-pins {
+ pins = "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio41";
function = "gpio";
};
};
+&uart3 {
+ interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&uart3_default>;
+ pinctrl-1 = <&uart3_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3988-bt";
+
+ vddio-supply = <&vreg_l9a_1p8>;
+ vddxo-supply = <&vreg_l16a_1p3>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l23a_3p3>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ max-speed = <3200000>;
+ };
+};
+
&uart4 {
status = "okay";
};
&usb_dwc3 {
maximum-speed = "super-speed";
- dr_mode = "peripheral";
};
&usb_hsphy {
status = "okay";
};
+&wifi {
+ vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+ vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+ qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <19200000>;
};
assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
assigned-clock-rates = <24000000>;
- dovdd-supply = <&vreg_l7f_1p8>;
+ dovdd-supply = <&vreg_l7f_1p8>;
avdd-supply = <&vdc_5v>;
dvdd-supply = <&vdc_5v>;
aliases {
serial0 = &uart12;
+ serial1 = &uart6;
sdhc2 = &sdhc_2;
};
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "panic-indicator";
default-state = "off";
+ panic-indicator;
};
led-wlan {
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+ bt_en_state: bt-default-state {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+
lt9611_irq_pin: lt9611-irq-state {
pins = "gpio63";
function = "gpio";
};
};
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,qca6390-bt";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_state>;
+
+ enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddpmu-supply = <&vreg_s2f_0p95>;
+ vddaon-supply = <&vreg_s6a_0p95>;
+ vddrfa0p9-supply = <&vreg_s2f_0p95>;
+ vddrfa1p3-supply = <&vreg_s8c_1p3>;
+ vddrfa1p9-supply = <&vreg_s5a_1p9>;
+ };
+};
+
&uart12 {
status = "okay";
};
altmodes {
displayport {
- svid = <0xff01>;
+ svid = /bits/ 16 <0xff01>;
vdo = <0x00001c46>;
};
};
"ANALOG_PON_OPT";
};
+&pmm8654au_0_pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
&pmm8654au_1_gpios {
gpio-line-names = "PMIC_C_ID0",
"PMIC_C_ID1",
};
};
+ rng: rng@10d2000 {
+ compatible = "qcom,sa8775p-trng", "qcom,trng";
+ reg = <0 0x010d2000 0 0x1000>;
+ };
+
ufs_mem_hc: ufs@1d84000 {
compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>,
- <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"dp_hs_phy_irq",
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 8 IRQ_TYPE_EDGE_RISING>,
- <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"dp_hs_phy_irq",
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 10 IRQ_TYPE_EDGE_RISING>,
- <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "pwr_event",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
interrupt-controller;
};
+ tsens2: thermal-sensor@c251000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c251000 0x0 0x1ff>,
+ <0x0 0x0c224000 0x0 0x8>;
+ interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <13>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@c252000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c252000 0x0 0x1ff>,
+ <0x0 0x0c225000 0x0 0x8>;
+ interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <13>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c263000 0x0 0x1ff>,
+ <0x0 0x0c222000 0x0 0x8>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <12>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c265000 0x0 0x1ff>,
+ <0x0 0x0c223000 0x0 0x8>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ #qcom,sensors = <12>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
aoss_qmp: power-management@c300000 {
compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0x0 0x0c3f0000 0x0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x0c440000 0x0 0x1100>,
compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
reg = <0x0 0x17c10000 0x0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
memtimer: timer@17c20000 {
};
};
+ thermal-zones {
+ aoss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-3-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ audio-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pcie-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-0-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-3-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-4-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-5-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pcie-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-0-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-3-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-0-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-1-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-2-0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ ddrss-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-1-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens2 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-3-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-0-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-0-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-1-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ nsp-1-2-1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ ddrss-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-1-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens3 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <105000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
arch_timer: timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
- pcie0: pci@1c00000{
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sa8775p";
reg = <0x0 0x01c00000 0x0 0x3000>,
<0x0 0x40000000 0x0 0xf20>,
status = "disabled";
};
- pcie1: pci@1c10000{
+ pcie1: pcie@1c10000 {
compatible = "qcom,pcie-sa8775p";
reg = <0x0 0x01c10000 0x0 0x3000>,
<0x0 0x60000000 0x0 0xf20>,
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7180.dtsi"
pinctrl-names = "default";
};
+ sound: sound {
+ compatible = "qcom,sc7180-qdsp6-sndcard";
+ pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+ pinctrl-names = "default";
+ model = "Acer-Aspire-1";
+
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ multimedia1-dai-link {
+ link-name = "MultiMedia1";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ multimedia2-dai-link {
+ link-name = "MultiMedia2";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ multimedia3-dai-link {
+ link-name = "MultiMedia3";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ multimedia4-dai-link {
+ link-name = "MultiMedia4";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
+ };
+
+ primary-rx-dai-link {
+ link-name = "Primary MI2S Playback";
+
+ cpu {
+ sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&alc5682 0>;
+ };
+ };
+
+ primary-tx-dai-link {
+ link-name = "Primary MI2S Capture";
+
+ cpu {
+ sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&alc5682 0>;
+ };
+ };
+
+ tertiary-rx-dai-link {
+ link-name = "Tertiary MI2S Playback";
+
+ cpu {
+ sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&max98357a>;
+ };
+ };
+
+ displayport-rx-dai-link {
+ link-name = "DisplayPort Playback";
+
+ cpu {
+ sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+ };
+
reg_tp_3p3: touchpad-regulator {
compatible = "regulator-fixed";
regulator-name = "tp_3p3";
AVDD-supply = <&vreg_l15a_1p8>;
MICVDD-supply = <®_codec_3p3>;
VBAT-supply = <®_codec_3p3>;
+ DBVDD-supply = <&vreg_l15a_1p8>;
+ LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+ /*
+ * NOTE: The board has a path from this codec to the
+ * DMIC microphones in the lid, however some of the option
+ * resistors are absent and the microphones are connected
+ * to the SoC instead.
+ *
+ * If the resistors were to be changed by the user to
+ * connect the codec, the following could be used:
+ *
+ * realtek,dmic1-data-pin = <1>;
+ * realtek,dmic1-clk-pin = <1>;
+ */
- realtek,dmic1-data-pin = <1>;
- realtek,dmic1-clk-pin = <1>;
realtek,jd-src = <1>;
};
};
status = "disabled";
};
+&pm6150_rtc {
+ status = "okay";
+};
+
+&q6afedai {
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+
+ dai@17 {
+ reg = <PRIMARY_MI2S_TX>;
+ qcom,sd-lines = <0>;
+ };
+
+ dai@20 {
+ reg = <TERTIARY_MI2S_RX>;
+ qcom,sd-lines = <0>;
+ };
+
+ dai@104 {
+ reg = <DISPLAY_PORT_RX>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+
+ dai@3 {
+ reg = <3>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
status = "okay";
};
+&remoteproc_adsp {
+ memory-region = <&adsp_mem>;
+ firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+ status = "okay";
+};
+
&remoteproc_mpss {
firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
status = "okay";
};
&panel {
- compatible = "kingdisplay,kd116n21-30nv-a010";
+ compatible = "edp-panel";
};
&pen_insert {
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
interrupt-controller;
#interrupt-cells = <1>;
- interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
- interconnect-names = "mdp0-mem";
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
iommus = <&apps_smmu 0x800 0x2>;
compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
* required by the setup for Chrome boards.
*/
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
/delete-node/ &hyp_mem;
/delete-node/ &xbl_mem;
/delete-node/ &reserved_xbl_uefi_log;
/ {
reserved-memory {
- adsp_mem: memory@86700000 {
- reg = <0x0 0x86700000 0x0 0x2800000>;
- no-map;
- };
-
camera_mem: memory@8ad00000 {
reg = <0x0 0x8ad00000 0x0 0x500000>;
no-map;
reg = <0x0 0x8b200000 0x0 0x500000>;
no-map;
};
-
- wpss_mem: memory@9ae00000 {
- reg = <0x0 0x9ae00000 0x0 0x1900000>;
- no-map;
- };
};
};
};
};
+/* Currently not used */
+&remoteproc_cdsp {
+ /delete-property/ memory-region;
+};
+
&remoteproc_wpss {
- status = "okay";
+ compatible = "qcom,sc7280-wpss-pil";
+ clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+ <&gcc GCC_WPSS_AHB_CLK>,
+ <&gcc GCC_WPSS_RSCP_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ahb_bdg",
+ "ahb",
+ "rscp",
+ "xo";
+
+ resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+ <&pdc_reset PDC_WPSS_SYNC_RESET>;
+ reset-names = "restart", "pdc_sync";
+
+ qcom,halt-regs = <&tcsr_1 0x17000>;
+
firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+ status = "okay";
};
&scm {
/ {
reserved-memory {
- mpss_mem: memory@8b800000 {
- reg = <0x0 0x8b800000 0x0 0xf600000>;
- no-map;
- };
-
mba_mem: memory@9c700000 {
reg = <0x0 0x9c700000 0x0 0x200000>;
no-map;
&remoteproc_mpss {
compatible = "qcom,sc7280-mss-pil";
+ reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+ reg-names = "qdsp6", "rmb";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_OFFLINE_AXI_CLK>,
/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
+/delete-node/ &mpss_mem;
/delete-node/ &remoteproc_mpss;
/delete-node/ &rmtfs_mem;
status = "okay";
};
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l7b_2p9>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+ vccq2-supply = <&vreg_l9b_1p2>;
+ vccq2-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p8>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
};
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#size-cells = <2>;
ranges;
- wlan_ce_mem: memory@4cd000 {
+ wlan_ce_mem: wlan-ce@4cd000 {
no-map;
reg = <0x0 0x004cd000 0x0 0x1000>;
};
- hyp_mem: memory@80000000 {
+ hyp_mem: hyp@80000000 {
reg = <0x0 0x80000000 0x0 0x600000>;
no-map;
};
- xbl_mem: memory@80600000 {
+ xbl_mem: xbl@80600000 {
reg = <0x0 0x80600000 0x0 0x200000>;
no-map;
};
- aop_mem: memory@80800000 {
+ aop_mem: aop@80800000 {
reg = <0x0 0x80800000 0x0 0x60000>;
no-map;
};
- aop_cmd_db_mem: memory@80860000 {
+ aop_cmd_db_mem: aop-cmd-db@80860000 {
reg = <0x0 0x80860000 0x0 0x20000>;
compatible = "qcom,cmd-db";
no-map;
};
- reserved_xbl_uefi_log: memory@80880000 {
+ reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
reg = <0x0 0x80884000 0x0 0x10000>;
no-map;
};
- sec_apps_mem: memory@808ff000 {
+ sec_apps_mem: sec-apps@808ff000 {
reg = <0x0 0x808ff000 0x0 0x1000>;
no-map;
};
- smem_mem: memory@80900000 {
+ smem_mem: smem@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
- cpucp_mem: memory@80b00000 {
+ cpucp_mem: cpucp@80b00000 {
no-map;
reg = <0x0 0x80b00000 0x0 0x100000>;
};
- wlan_fw_mem: memory@80c00000 {
+ wlan_fw_mem: wlan-fw@80c00000 {
reg = <0x0 0x80c00000 0x0 0xc00000>;
no-map;
};
- video_mem: memory@8b200000 {
+ adsp_mem: adsp@86700000 {
+ reg = <0x0 0x86700000 0x0 0x2800000>;
+ no-map;
+ };
+
+ video_mem: video@8b200000 {
reg = <0x0 0x8b200000 0x0 0x500000>;
no-map;
};
- ipa_fw_mem: memory@8b700000 {
+ cdsp_mem: cdsp@88f00000 {
+ reg = <0x0 0x88f00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@8b700000 {
reg = <0 0x8b700000 0 0x10000>;
no-map;
};
- rmtfs_mem: memory@9c900000 {
+ gpu_zap_mem: zap@8b71a000 {
+ reg = <0 0x8b71a000 0 0x2000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0xf600000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@9ae00000 {
+ reg = <0x0 0x9ae00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@9c900000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x9c900000 0x0 0x280000>;
no-map;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
<0>, <&pcie1_phy>,
- <0>, <0>, <0>,
+ <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
"pcie_0_pipe_clk", "pcie_1_pipe_clk",
bus-width = <8>;
supports-cqe;
+ dma-coherent;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
};
};
+ rng: rng@10d3000 {
+ compatible = "qcom,sc7280-trng", "qcom,trng";
+ reg = <0 0x010d3000 0 0x1000>;
+ };
+
cnoc2: interconnect@1500000 {
reg = <0 0x01500000 0 0x1000>;
compatible = "qcom,sc7280-cnoc2";
qcom,smem-state-names = "wlan-smp2p-out";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
status = "disabled";
};
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x80 0x0>;
+ dma-coherent;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz =
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sc7280-qmp-ufs-phy";
+ reg = <0x0 0x01d87000 0x0 0xe00>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_UFS_1_CLKREF_EN>;
+ clock-names = "ref", "ref_aux", "qref";
+
+ power-domains = <&rpmhpd SC7280_MX>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0x0 0x01dc4000 0x0 0x28000>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ iommus = <&apps_smmu 0x4e4 0x0011>,
+ <&apps_smmu 0x4e6 0x0011>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0x0 0x01dfa000 0x0 0x6000>;
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+ iommus = <&apps_smmu 0x4e4 0x0011>,
+ <&apps_smmu 0x4e4 0x0011>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "memory";
+ };
+
ipa: ipa@1e40000 {
compatible = "qcom,sc7280-ipa";
"cx_mem",
"cx_dbgc";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&adreno_smmu 0 0x401>;
+ iommus = <&adreno_smmu 0 0x400>,
+ <&adreno_smmu 1 0x400>;
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
+ gpu_zap_shader: zap-shader {
+ memory-region = <&gpu_zap_mem>;
+ };
+
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-hz = /bits/ 64 <315000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <1804000>;
- opp-supported-hw = <0x03>;
+ opp-supported-hw = <0x07>;
};
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <4068000>;
- opp-supported-hw = <0x03>;
+ opp-supported-hw = <0x07>;
};
/* Only applicable for SKUs which has 550Mhz as Fmax */
opp-hz = /bits/ 64 <550000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <6832000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-608000000 {
opp-hz = /bits/ 64 <608000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-peak-kBps = <8368000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <8532000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-812000000 {
opp-hz = /bits/ 64 <812000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <8532000>;
- opp-supported-hw = <0x02>;
+ opp-supported-hw = <0x06>;
};
opp-840000000 {
"gpu_cc_hub_aon_clk";
power-domains = <&gpucc GPU_CC_CX_GDSC>;
+ dma-coherent;
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc7280-mpss-pas";
- reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
- reg-names = "qdsp6", "rmb";
+ reg = <0 0x04080000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
operating-points-v2 = <&sdhc2_opp_table>;
bus-width = <4>;
+ dma-coherent;
qcom,dll-config = <0x0007642c>;
#clock-cells = <1>;
#phy-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
usb_2: usb@8cf8800 {
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 12 IRQ_TYPE_EDGE_RISING>,
- <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
status = "disabled";
};
+ remoteproc_adsp: remoteproc@3700000 {
+ compatible = "qcom,sc7280-adsp-pas";
+ reg = <0 0x03700000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC7280_LCX>,
+ <&rpmhpd SC7280_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
+ };
+ };
+
remoteproc_wpss: remoteproc@8a00000 {
- compatible = "qcom,sc7280-wpss-pil";
+ compatible = "qcom,sc7280-wpss-pas";
reg = <0 0x08a00000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
- clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
- <&gcc GCC_WPSS_AHB_CLK>,
- <&gcc GCC_WPSS_RSCP_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "ahb_bdg", "ahb",
- "rscp", "xo";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
power-domains = <&rpmhpd SC7280_CX>,
<&rpmhpd SC7280_MX>;
qcom,smem-states = <&wpss_smp2p_out 0>;
qcom,smem-state-names = "stop";
- resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
- <&pdc_reset PDC_WPSS_SYNC_RESET>;
- reset-names = "restart", "pdc_sync";
-
- qcom,halt-regs = <&tcsr_1 0x17000>;
status = "disabled";
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ remoteproc_cdsp: remoteproc@a300000 {
+ compatible = "qcom,sc7280-cdsp-pas";
+ reg = <0 0x0a300000 0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MX>;
+ power-domain-names = "cx", "mx";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x11a1 0x0420>,
+ <&apps_smmu 0x1181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x11a2 0x0420>,
+ <&apps_smmu 0x1182 0x0420>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x11a3 0x0420>,
+ <&apps_smmu 0x1183 0x0420>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x11a4 0x0420>,
+ <&apps_smmu 0x1184 0x0420>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x11a5 0x0420>,
+ <&apps_smmu 0x1185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x11a6 0x0420>,
+ <&apps_smmu 0x1186 0x0420>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x11a7 0x0420>,
+ <&apps_smmu 0x1187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x11a8 0x0420>,
+ <&apps_smmu 0x1188 0x0420>;
+ };
+
+ /* note: secure cb9 in downstream */
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x11ab 0x0420>,
+ <&apps_smmu 0x118b 0x0420>;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x11ac 0x0420>,
+ <&apps_smmu 0x118c 0x0420>;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x11ad 0x0420>,
+ <&apps_smmu 0x118d 0x0420>;
+ };
+
+ compute-cb@14 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <14>;
+ iommus = <&apps_smmu 0x11ae 0x0420>,
+ <&apps_smmu 0x118e 0x0420>;
+ };
+ };
+ };
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
#power-domain-cells = <1>;
};
+ cci0: cci@ac4a000 {
+ compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac4a000 0 0x1000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac4b000 {
+ compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac4b000 0 0x1000>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+ pinctrl-0 = <&cci2_default &cci3_default>;
+ pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc7280-camcc";
reg = <0 0x0ad00000 0 0x10000>;
interrupt-controller;
#interrupt-cells = <1>;
- interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
- interconnect-names = "mdp0-mem";
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
iommus = <&apps_smmu 0x900 0x402>;
gpio-ranges = <&tlmm 0 0 175>;
wakeup-parent = <&pdc>;
+ cci0_default: cci0-default-state {
+ pins = "gpio69", "gpio70";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci0_sleep: cci0-sleep-state {
+ pins = "gpio69", "gpio70";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_default: cci1-default-state {
+ pins = "gpio71", "gpio72";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci1_sleep: cci1-sleep-state {
+ pins = "gpio71", "gpio72";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_default: cci2-default-state {
+ pins = "gpio73", "gpio74";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci2_sleep: cci2-sleep-state {
+ pins = "gpio73", "gpio74";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_default: cci3-default-state {
+ pins = "gpio75", "gpio76";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci3_sleep: cci3-sleep-state {
+ pins = "gpio75", "gpio76";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
dp_hot_plug_det: dp-hot-plug-det-state {
pins = "gpio47";
function = "dp_hot";
compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
status = "reserved"; /* Owned by Gunyah hyp */
};
};
&pcie3 {
- perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie3_default_state>;
pinctrl-names = "default";
pinctrl-0 = <&hall_int_active_state>;
lid-switch {
- gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
wakeup-source;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
};
vreg_l10e_2p9: ldo10 {
regulator-min-microvolt = <2904000>;
regulator-max-microvolt = <2904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
};
vreg_l12e: ldo12 {
};
&pcie1 {
- perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
#include <dt-bindings/clock/qcom,gcc-sc8180x.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
qcom,bcm-voters = <&apps_bcm_voter>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
assigned-clock-rates = <19200000>;
- iommus = <&apps_smmu 0x1d80 0x7f>;
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
<0x100 &apps_smmu 0x1d81 0x1>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
+ dma-coherent;
status = "disabled";
};
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
status = "disabled";
};
- pcie3: pci@1c08000 {
+ pcie3: pcie@1c08000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
assigned-clock-rates = <19200000>;
- iommus = <&apps_smmu 0x1e00 0x7f>;
iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
<0x100 &apps_smmu 0x1e01 0x1>;
phys = <&pcie3_phy>;
phy-names = "pciephy";
+ dma-coherent;
status = "disabled";
};
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_CLKREF_CLK>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_3_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
status = "disabled";
};
- pcie1: pci@1c10000 {
+ pcie1: pcie@1c10000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c10000 0 0x3000>,
<0 0x68000000 0 0xf1d>,
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
- iommus = <&apps_smmu 0x1c80 0x7f>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
+ dma-coherent;
status = "disabled";
};
status = "disabled";
};
- pcie2: pci@1c18000 {
+ pcie2: pcie@1c18000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c18000 0 0x3000>,
<0 0x70000000 0 0xf1d>,
assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
assigned-clock-rates = <19200000>;
- iommus = <&apps_smmu 0x1d00 0x7f>;
iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
<0x100 &apps_smmu 0x1d01 0x1>;
phys = <&pcie2_phy>;
phy-names = "pciephy";
+ dma-coherent;
status = "disabled";
};
"refgen",
"pipe";
#clock-cells = <0>;
- clock-output-names = "pcie_3_pipe_clk";
+ clock-output-names = "pcie_2_pipe_clk";
#phy-cells = <0>;
<0 0>,
<0 0>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
+
status = "disabled";
};
usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
clock-names = "iface",
"bus",
"core",
- "vsync";
+ "vsync",
+ "rot",
+ "lut";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
phys = <&edp_phy>;
phy-names = "dp";
- #sound-dai-cells = <0>;
-
operating-points-v2 = <&edp_opp_table>;
power-domains = <&rpmhpd SC8180X_MMCX>;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x20000>;
};
apss_shared: mailbox@17c00000 {
- compatible = "qcom,sc8180x-apss-shared";
+ compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
reg = <0x0 0x17c00000 0x0 0x1000>;
#mbox-cells = <1>;
};
};
&mdss0_dp3_phy {
+ compatible = "qcom,sc8280xp-edp-phy";
+
vdda-phy-supply = <&vreg_l6b>;
vdda-pll-supply = <&vreg_l3b>;
};
&pcie4 {
+ max-link-speed = <2>;
+
perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_indicator_en>;
+
led-camera-indicator {
label = "white:camera-indicator";
function = LED_FUNCTION_INDICATOR;
&mdss0_dp3 {
compatible = "qcom,sc8280xp-edp";
+ /delete-property/ #sound-dai-cells;
data-lanes = <0 1 2 3>;
};
&mdss0_dp3_phy {
+ compatible = "qcom,sc8280xp-edp-phy";
vdda-phy-supply = <&vreg_l6b>;
vdda-pll-supply = <&vreg_l3b>;
};
&pcie4 {
+ max-link-speed = <2>;
+
perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
};
};
+ cam_indicator_en: cam-indicator-en-state {
+ pins = "gpio28";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
edp_reg_en: edp-reg-en-state {
pins = "gpio25";
function = "gpio";
#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
status = "disabled";
};
- swr1: soundwire-controller@3210000 {
+ swr1: soundwire@3210000 {
compatible = "qcom,soundwire-v1.6.0";
reg = <0 0x03210000 0 0x2000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- swr0: soundwire-controller@3250000 {
+ swr0: soundwire@3250000 {
reg = <0 0x03250000 0 0x2000>;
compatible = "qcom,soundwire-v1.6.0";
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
- swr2: soundwire-controller@3330000 {
+ swr2: soundwire@3330000 {
compatible = "qcom,soundwire-v1.6.0";
reg = <0 0x03330000 0 0x2000>;
interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
};
};
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sc8280xp-camcc";
+ reg = <0 0x0ad00000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss0: display-subsystem@ae00000 {
compatible = "qcom,sc8280xp-mdss";
reg = <0 0x0ae00000 0 0x1000>;
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
+ qcom,qmp = <&aoss_qmp>;
};
spmi_bus: spmi@c440000 {
compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
compatible = "qcom,sdm660-bimc";
reg = <0x01008000 0x78000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@10ac000 {
compatible = "qcom,sdm660-cnoc";
reg = <0x01500000 0x10000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@1626000 {
compatible = "qcom,sdm660-snoc";
reg = <0x01626000 0x7090>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
-
- assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <1000>;
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "bus";
#global-interrupts = <2>;
#iommu-cells = <1>;
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
- clock-names = "bus",
- "bus_a",
- "ipa",
+ clock-names = "ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&rpmcc RPM_SMD_IPA_CLK>,
+ clocks = <&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
compatible = "qcom,sdm660-mnoc";
reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
tsens: thermal-sensor@10ae000 {
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>;
- clock-names = "iface", "mem", "mem_iface";
+ clock-names = "iface",
+ "mem",
+ "mem_iface";
#global-interrupts = <2>;
#iommu-cells = <1>;
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
- "mock_utmi",
- "bus";
+ "mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <19200000>, <120000000>,
- <19200000>;
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
- "bus-mm", "bus-smmu";
+ "bus-smmu";
#global-interrupts = <2>;
#iommu-cells = <1>;
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
#interconnect-cells = <1>;
- /*
- * This one apparently features no clocks,
- * so let's not mess with the driver needlessly
- */
- clock-names = "bus", "bus_a";
- clocks = <&xo_board>, <&xo_board>;
};
apcs_glb: mailbox@17911000 {
};
};
+&lpass {
+ status = "okay";
+};
+
&pm8953_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
&usb3_dwc3 {
dr_mode = "peripheral";
};
+
+&wcnss {
+ status = "okay";
+
+ vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3680";
+
+ vddxo-supply = <&pm8953_l7>;
+ vddrfa-supply = <&pm8953_l19>;
+ vddpa-supply = <&pm8953_l9>;
+ vdddig-supply = <&pm8953_l5>;
+};
* Copyright (c) 2022, Richard Acayan. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
};
};
+ dsi_opp_table: opp-table-dsi {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
#interrupt-cells = <4>;
};
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,sdm670-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x880 0x8>,
+ <&apps_smmu 0xc80 0x8>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sdm670-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SDM670_CX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-171428571 {
+ opp-hz = /bits/ 64 <171428571>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@ae94000 {
+ compatible = "qcom,sdm670-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM670_CX>;
+
+ phys = <&mdss_dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94a00 0 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,sdm670-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM670_CX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96a00 0 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "gcc_disp_gpll0_clk_src",
+ "gcc_disp_gpll0_div_clk_src",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_link_clk_divsel_ten",
+ "dp_vco_divided_clk_src_mux";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x80000>;
};
cpufreq_hw: cpufreq@17d43000 {
- compatible = "qcom,cpufreq-hw";
+ compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1";
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "panic-indicator";
default-state = "off";
+ panic-indicator;
};
led-1 {
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
- swm: swm@c85 {
+ swm: soundwire@c85 {
left_spkr: speaker@0,1 {
compatible = "sdw10217201000";
reg = <0 1>;
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
status = "okay";
};
+&pmi8998_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
&q6afedai {
qi2s@22 {
reg = <22>;
reg = <0x42 0x2>;
};
- swm: swm@c85 {
+ swm: soundwire@c85 {
compatible = "qcom,soundwire-v1.3.0";
reg = <0xc85 0x40>;
interrupts-extended = <&wcd9340 20>;
status = "okay";
};
+&pmi8998_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sdm845";
reg = <0 0x01c00000 0 0x2000>,
<0 0x60000000 0 0xf1d>,
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sdm845";
reg = <0 0x01c08000 0 0x2000>,
<0 0x40000000 0 0xf1d>,
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_PHY_GDSC>;
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
- freq-table-hz =
- <50000000 200000000>,
- <0 0>,
- <0 0>,
- <37500000 150000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <75000000 300000000>;
+
+ operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sdm845-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
+ port {
etf_in: endpoint {
remote-endpoint =
<&merge_funnel_out>;
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x18c>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x128>,
- <0 0x088eb400 0 0x1fc>,
- <0 0x088eb800 0 0x218>,
- <0 0x088eb600 0 0x70>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ status = "disabled";
};
usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
iommus = <&apps_smmu 0x760 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
reg = <0 0x17980000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
apss_shared: mailbox@17990000 {
hid-descr-addr = <0x20>;
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-source;
};
};
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hid_active>;
+
+ wakeup-source;
};
};
pinctrl-names = "default";
pinctrl-0 = <&i2c11_hid_active>;
+
+ wakeup-source;
};
};
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
- swm: swm@c85 {
+ swm: soundwire@c85 {
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
- swm: swm@c85 {
+ swm: soundwire@c85 {
left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
stdout-path = "serial0:115200n8";
};
+&pm7550ba_eusb2_repeater {
+ vdd18-supply = <&vreg_l5b_1p776>;
+ vdd3-supply = <&vreg_l10b_3p08>;
+};
+
&qupv3_id_0 {
status = "okay";
};
&uart1 {
status = "okay";
};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ vdd-supply = <&vreg_l4b_0p88>;
+ vdda12-supply = <&vreg_l1b_1p2>;
+
+ phys = <&pm7550ba_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+
+ status = "okay";
+};
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
};
};
+ clk_virt: interconnect-0 {
+ compatible = "qcom,sdx75-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,sdx75-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x0>;
clock-names = "m-ahb",
"s-ahb";
iommus = <&apps_smmu 0xe3 0x0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core";
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0x0 0x00984000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qupv3_se1_2uart_active>;
pinctrl-1 = <&qupv3_se1_2uart_sleep>;
};
};
+ usb_hsphy: phy@ff4000 {
+ compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+ reg = <0x0 0x00ff4000 0x0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+ reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB2_CLKREF_EN>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ system_noc: interconnect@1640000 {
+ compatible = "qcom,sdx75-system-noc";
+ reg = <0x0 0x01640000 0x0 0x4b400>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ pcie_anoc: interconnect@16c0000 {
+ compatible = "qcom,sdx75-pcie-anoc";
+ reg = <0x0 0x016c0000 0x0 0x14200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
#hwlock-cells = <1>;
};
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+ reg = <0x0 0x0a6f8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ status = "disabled";
+
+ usb_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x0a600000 0x0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x80 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>,
+ <&usb_qmpphy>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sdx75-pdc", "qcom,pdc";
reg = <0x0 0xb220000 0x0 0x30000>,
#freq-domain-cells = <1>;
#clock-cells = <1>;
};
+
+ dc_noc: interconnect@190e0000 {
+ compatible = "qcom,sdx75-dc-noc";
+ reg = <0x0 0x190e0000 0x0 0x8200>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@19100000 {
+ compatible = "qcom,sdx75-gem-noc";
+ reg = <0x0 0x19100000 0x0 0x34080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
};
timer {
model = "Qualcomm Technologies, Inc. SM4450 QRD";
compatible = "qcom,sm4450-qrd", "qcom,sm4450";
- aliases { };
+ aliases {
+ serial0 = &uart7;
+ };
chosen {
- bootargs = "console=hvc0";
+ stdout-path = "serial0:115200n8";
};
};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+ status = "okay";
+};
* Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
interrupt-parent = <&intc>;
};
};
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ aop_cmd_db_mem: cmd-db@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x80860000 0x0 0x20000>;
+ no-map;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sm4450-gcc";
+ reg = <0x0 0x00100000 0x0 0x1f4200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
+ qupv3_id_0: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x00ac0000 0x0 0x2000>;
+ ranges;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ uart7: serial@a88000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0x0 0x00a88000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
interrupt-controller;
};
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm4450-tlmm";
+ reg = <0x0 0x0f100000 0x0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 137>;
+ wakeup-parent = <&pdc>;
+
+ qup_uart7_rx: qup-uart7-rx-state {
+ pins = "gpio23";
+ function = "qup1_se2_l2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qup_uart7_tx: qup-uart7-tx-state {
+ pins = "gpio22";
+ function = "qup1_se2_l2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
intc: interrupt-controller@17200000 {
compatible = "arm,gic-v3";
reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */
status = "disabled";
};
};
+
+ apps_rsc: rsc@17a00000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x17a00000 0x0 0x10000>,
+ <0x0 0x17a10000 0x0 0x10000>,
+ <0x0 0x17a20000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ label = "apps_rsc";
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm4450-rpmh-clk";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+ };
+
};
timer {
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
scm: scm {
compatible = "qcom,scm-sm6115", "qcom,scm";
#reset-cells = <1>;
+ interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
};
};
reg = <0 0x80000000 0 0>;
};
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ system_noc: interconnect@1880000 {
+ compatible = "qcom,sm6115-snoc";
+ reg = <0x0 0x01880000 0x0 0x5f080>;
+ clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&rpmcc RPM_SMD_IPA_CLK>;
+ clock-names = "cpu_axi",
+ "ufs_axi",
+ "usb_axi",
+ "ipa";
+ #interconnect-cells = <2>;
+
+ clk_virt: interconnect-clk {
+ compatible = "qcom,sm6115-clk-virt";
+ #interconnect-cells = <2>;
+ };
+
+ mmrt_virt: interconnect-mmrt {
+ compatible = "qcom,sm6115-mmrt-virt";
+ #interconnect-cells = <2>;
+ };
+
+ mmnrt_virt: interconnect-mmnrt {
+ compatible = "qcom,sm6115-mmnrt-virt";
+ #interconnect-cells = <2>;
+ };
+ };
+
+ config_noc: interconnect@1900000 {
+ compatible = "qcom,sm6115-cnoc";
+ reg = <0x0 0x01900000 0x0 0x6200>;
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+ clock-names = "usb_axi";
+ #interconnect-cells = <2>;
+ };
+
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x0 0x01b40000 0x0 0x7000>;
clock-names = "core";
};
+ pmu@1b8e300 {
+ compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x01b8e300 0x0 0x600>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+ interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <(200 * 4 * 1000)>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <(300 * 4 * 1000)>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <(451 * 4 * 1000)>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <(547 * 4 * 1000)>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <(681 * 4 * 1000)>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <(768 * 4 * 1000)>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <(1017 * 4 * 1000)>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <(1353 * 4 * 1000)>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <(1555 * 4 * 1000)>;
+ };
+
+ opp-9 {
+ opp-peak-kBps = <(1804 * 4 * 1000)>;
+ };
+ };
+ };
+
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x01c40000 0x0 0x1100>,
#thermal-sensor-cells = <1>;
};
+ bimc: interconnect@4480000 {
+ compatible = "qcom,sm6115-bimc";
+ reg = <0x0 0x04480000 0x0 0x80000>;
+ #interconnect-cells = <2>;
+ };
+
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x0 0x045f0000 0x0 0x7000>;
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "iface", "core", "xo", "ice";
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
+ interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
bus-width = <8>;
status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <250000 133320>;
+ opp-avg-kBps = <102400 65000>;
+ };
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <204800 200000>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <204800 200000>;
+ };
+ };
};
sdhc_2: mmc@4784000 {
operating-points-v2 = <&sdhc2_opp_table>;
iommus = <&apps_smmu 0x00a0 0x0>;
resets = <&gcc GCC_SDCC2_BCR>;
+ interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
bus-width = <4>;
qcom,dll-config = <0x0007642c>;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <250000 133320>;
+ opp-avg-kBps = <261438 150000>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmpd_opp_nom>;
+ opp-peak-kBps = <800000 300000>;
+ opp-avg-kBps = <261438 300000>;
};
};
};
reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <1>;
#reset-cells = <1>;
ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6115-qmp-ufs-phy";
- reg = <0x0 0x04807000 0x0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0x0 0x04807000 0x0 0x1000>;
clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
clock-names = "ref", "ref_aux";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@4807400 {
- reg = <0x0 0x04807400 0x0 0x098>,
- <0x0 0x04807600 0x0 0x130>,
- <0x0 0x04807c00 0x0 0x16c>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
gpi_dma0: dma-controller@4a00000 {
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ uart3: serial@4a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
+ interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ status = "disabled";
+ };
+
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a90000 0x0 0x4000>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ /* TODO: USB<->IPA path */
+ interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
qcom,select-utmi-as-pipe-clk;
status = "disabled";
iommus = <&apps_smmu 0x420 0x2>,
<&apps_smmu 0x421 0x0>;
+ interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
#address-cells = <2>;
#size-cells = <2>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x0f120000 0x0 0x1000>;
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x0 0x20000000>;
clock-frequency = <19200000>;
frame@f121000 {
- reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+ reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
frame@f123000 {
- reg = <0x0 0x0f123000 0x0 0x1000>;
+ reg = <0x0 0x0f123000 0x1000>;
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f124000 {
- reg = <0x0 0x0f124000 0x0 0x1000>;
+ reg = <0x0 0x0f124000 0x1000>;
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f125000 {
- reg = <0x0 0x0f125000 0x0 0x1000>;
+ reg = <0x0 0x0f125000 0x1000>;
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f126000 {
- reg = <0x0 0x0f126000 0x0 0x1000>;
+ reg = <0x0 0x0f126000 0x1000>;
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f127000 {
- reg = <0x0 0x0f127000 0x0 0x1000>;
+ reg = <0x0 0x0f127000 0x1000>;
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f128000 {
- reg = <0x0 0x0f128000 0x0 0x1000>;
+ reg = <0x0 0x0f128000 0x1000>;
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <66666667>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
power-domains = <&gcc USB30_PRIM_GDSC>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm6350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x18c>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
clock-names = "ref",
"ref_aux";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
+ #phy-cells = <0>;
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x128>,
- <0 0x01d87600 0 0x1fc>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x128>,
- <0 0x01d87a00 0 0x1fc>;
- #phy-cells = <0>;
- };
+ status = "disabled";
};
ipa: ipa@1e40000 {
compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
};
};
+ touch_avdd: touch-avdd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_avdd";
+ gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_avdd_default>;
+ enable-active-high;
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
interrupts = <22 0x2008>;
vdd-supply = <&pm6125_l13>;
+ avdd-supply = <&touch_avdd>;
pinctrl-names = "default";
- pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+ pinctrl-0 = <&ts_int_default>;
};
};
status = "okay";
};
+&remoteproc_mss {
+ firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+ status = "okay";
+};
+
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm6125-regulators";
};
pm6125_l7: l7 {
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
};
pm6125_l8: l8 {
pm6125_l21: l21 {
regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3400000>;
+ regulator-max-microvolt = <3312000>;
};
pm6125_l22: l22 {
pm6125_l23: l23 {
regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3400000>;
+ regulator-max-microvolt = <3312000>;
};
pm6125_l24: l24 {
};
pmr735a_l2: l2 {
- regulator-min-microvolt = <352000>;
- regulator-max-microvolt = <796000>;
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <640000>;
};
pmr735a_l3: l3 {
pins = "gpio59";
function = "gpio";
drive-strength = <8>;
- output-high;
+ output-low;
};
};
};
&usb_1_hsphy {
+ vdda-pll-supply = <&pm6125_l7>;
+ vdda18-supply = <&pm6125_l10>;
+ vdda33-supply = <&pmr735a_l7>;
+ status = "okay";
+};
+
+&wifi {
+ vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+ vdd-1.8-xo-supply = <&pm6125_l16>;
+ vdd-1.3-rfa-supply = <&pm6125_l2>;
+ vdd-3.3-ch0-supply = <&pm6125_l23>;
+ vdd-3.3-ch1-supply = <&pm6125_l21>;
status = "okay";
};
};
};
+ mpm: interrupt-controller {
+ compatible = "qcom,mpm";
+ qcom,rpm-msg-ram = <&apss_mpm>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #power-domain-cells = <0>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <5 296>, /* Soundwire wake_irq */
+ <12 422>, /* DWC3 ss_phy_irq */
+ <86 183>, /* MPM wake, SPMI */
+ <89 314>, /* TSENS0 0C */
+ <90 315>, /* TSENS1 0C */
+ <93 164>, /* DWC3 dm_hs_phy_irq */
+ <94 165>; /* DWC3 dp_hs_phy_irq */
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
CLUSTER_PD: power-domain-cpu-cluster0 {
#power-domain-cells = <0>;
+ power-domains = <&mpm>;
domain-idle-states = <&CLUSTER_SLEEP_0>;
};
};
reg = <0 0x00500000 0 0x800000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&tlmm 0 0 157>;
- /* TODO: Hook up MPM as wakeup-parent when it's there */
+ wakeup-parent = <&mpm>;
interrupt-controller;
gpio-controller;
#interrupt-cells = <2>;
drive-strength = <6>;
bias-disable;
};
+
+ qup_uart1_default: qup-uart1-default-state {
+ cts-pins {
+ pins = "gpio61";
+ function = "qup01";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ rts-pins {
+ pins = "gpio62";
+ function = "qup01";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio63";
+ function = "qup01";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio64";
+ function = "qup01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
gcc: clock-controller@1400000 {
<0 0x01c0a000 0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
};
rpm_msg_ram: sram@45f0000 {
- compatible = "qcom,rpm-msg-ram";
+ compatible = "qcom,rpm-msg-ram", "mmio-sram";
reg = <0 0x045f0000 0 0x7000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x045f0000 0x7000>;
+
+ apss_mpm: sram@1b8 {
+ reg = <0x1b8 0x48>;
+ };
};
sram@4690000 {
status = "disabled";
};
+ uart1: serial@4a84000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a84000 0x0 0x4000>;
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ pinctrl-0 = <&qup_uart1_default>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
i2c2: i2c@4a88000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a88000 0x0 0x4000>;
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <133333333>;
- interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+ <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
};
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <<9611_out>;
+ };
+ };
+ };
};
&apps_rsc {
vdda_sp_sensor:
vdda_ufs_2ln_core_1:
vdda_ufs_2ln_core_2:
- vdda_usb_ss_dp_core_1:
- vdda_usb_ss_dp_core_2:
vdda_qlink_lv:
vdda_qlink_lv_ck:
vreg_l5a_0p875: ldo5 {
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_l18a_0p8: ldo18 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
};
regulators-1 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&gpu {
- /*
- * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
- * after display support is added on this board.
- */
- compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
status = "okay";
};
+&i2c4 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pm8150b_typec_sbu_out>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ lt9611_codec: hdmi-bridge@3b {
+ compatible = "lontium,lt9611";
+ reg = <0x3b>;
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s4a_1p8>;
+ vcc-supply = <&vreg_bob>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<9611_irq_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt9611_b: endpoint {
+ remote-endpoint = <&mdss_dsi1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ status = "okay";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_b>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi1_phy {
+ vdds-supply = <&vreg_l5a_0p875>;
+ status = "okay";
+};
+
+&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ status = "okay";
+};
+
+&pm8150b_typec {
+ status = "okay";
+
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm8150b_role_switch_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm8150b_typec_mux_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pm8150b_typec_sbu_out: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
linux,code = <KEY_VOLUMEDOWN>;
};
+&qupv3_id_0 {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <0 4>, <126 4>;
+
+ lt9611_irq_pin: lt9611-irq-state {
+ pins = "gpio9";
+ function = "gpio";
+ bias-disable;
+ };
+
};
&uart2 {
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+ vdda-pll-supply = <&vreg_l18a_0p8>;
+ orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+ remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pm8150b_typec_mux_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
&usb_2_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+ vdda-pll-supply = <&vreg_l5a_0p875>;
};
&usb_1 {
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
};
&usb_2_dwc3 {
<0x0 0x010ad000 0x0 0x3000>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8150";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
phys = <&pcie0_phy>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8150";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
phys = <&pcie1_phy>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8150-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x16c>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x16c>,
- <0 0x01d87a00 0 0x200>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
+ port {
replicator1_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
#phy-cells = <1>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8150-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x200>,
- <0 0x088eb400 0 0x200>,
- <0 0x088eb800 0 0x800>,
- <0 0x088eb600 0 0x200>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ status = "disabled";
};
sdhc_2: mmc@8804000 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
};
};
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
iommus = <&apps_smmu 0x160 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
remote-endpoint = <&mdss_dsi1_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
};
};
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0x0ae90a00 0 0x600>,
+ <0 0x0ae91000 0 0x600>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp_out: endpoint {
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk";
power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
/delete-node/ &xbl_aop_mem;
/ {
- classis-type = "tablet";
+ chassis-type = "tablet";
/* required for bootloader to select correct board */
qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
};
reserved-memory {
- xbl_aop_mem: xbl-aop@80700000 {
+ xbl_aop_mem: xbl-aop@80600000 {
reg = <0x0 0x80600000 0x0 0x260000>;
no-map;
};
};
};
+&pm8150b_typec {
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pm8150b_role_switch_in: endpoint {
+ remote-endpoint = <&usb_1_role_switch_out>;
+ };
+ };
+ };
+ };
+};
+
+&pm8150b_vbus {
+ status = "okay";
+};
+
&pon_pwrkey {
status = "okay";
};
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
maximum-speed = "high-speed";
/* Remove USB3 phy */
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
+ usb-role-switch;
};
&usb_1_hsphy {
status = "okay";
};
+&usb_1_role_switch_out {
+ remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
&ufs_mem_hc {
vcc-supply = <&vreg_l17a_3p0>;
vcc-max-microamp = <800000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+ model = "Xiaomi Pad 6";
+ compatible = "xiaomi,pipa", "qcom,sm8250";
+
+ chassis-type = "tablet";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+ qcom,board-id = <0x34 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ width = <1800>;
+ height = <2880>;
+ stride = <(1800 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ battery_l: battery-l {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3870000>;
+ energy-full-design-microwatt-hours = <16700000>;
+ charge-full-design-microamp-hours = <4420000>;
+ };
+
+ battery_r: battery-r {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3870000>;
+ energy-full-design-microwatt-hours = <16700000>;
+ charge-full-design-microamp-hours = <4420000>;
+ };
+
+ bl_vddpos_5p5: bl-vddpos-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "bl_vddpos_5p5";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+ gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ bl_vddneg_5p5: bl-vddneg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "bl_vddneg_5p5";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+ gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&vol_up_n>;
+ pinctrl-names = "default";
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+ vreg_s6c_0p88: smpc6-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s6c_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+
+ reserved-memory {
+ xbl_aop_mem: xbl-aop@80700000 {
+ reg = <0x0 0x80600000 0x0 0x260000>;
+ no-map;
+ };
+
+ slpi_mem: slpi@88c00000 {
+ reg = <0x0 0x88c00000 0x0 0x2f00000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@8bb00000 {
+ reg = <0x0 0x8bb00000 0x0 0x2500000>;
+ no-map;
+ };
+
+ spss_mem: spss@8e000000 {
+ reg = <0x0 0x8e000000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+ reg = <0x0 0x8e100000 0x0 0x4600000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ no-map;
+ };
+
+ ramoops@b0000000 {
+ compatible = "ramoops";
+ reg = <0x0 0xb0000000 0x0 0x400000>;
+ record-size = <0x1000>;
+ console-size = <0x200000>;
+ ecc-size = <16>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+ status = "okay";
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ /* (S1+S2+S3) - cx.lvl (ARC) */
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_1p9: smps5 {
+ regulator-name = "vreg_s5a_1p9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p95: smps6 {
+ regulator-name = "vreg_s6a_0p95";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p9: ldo3 {
+ regulator-name = "vreg_l3a_0p9";
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 - lmx.lvl (ARC) */
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L7 is unused. */
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L10 is unused, L11 - lcx.lvl (ARC) */
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L13 is unused. */
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-name = "vreg_l14a_1p88";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L15 & L16 are unused. */
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p9: ldo18 {
+ regulator-name = "vreg_l18a_0p9";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3350000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ /*
+ * S1-S6 are ARCs:
+ * (S1+S2) - gfx.lvl,
+ * S3 - mx.lvl,
+ * (S4+S5) - mmcx.lvl,
+ * S6 - ebi.lvl
+ */
+
+ vreg_s7c_0p35: smps7 {
+ regulator-name = "vreg_s7c_0p35";
+ regulator-min-microvolt = <348000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8c_1p35: smps8 {
+ regulator-name = "vreg_s8c_1p35";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L2-4 are unused. */
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-name = "vreg_l5c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-name = "vreg_l6c_2p9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_2p85: ldo7 {
+ regulator-name = "vreg_l7c_2p85";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-name = "vreg_l9c_2p9";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-name = "vreg_l10c_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p0: ldo11 {
+ regulator-name = "vreg_l11c_3p0";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8009-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vreg_bob>;
+ vdd-l2-supply = <&vreg_s8c_1p35>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_s4a_1p8>;
+
+ vreg_s1f_1p2: smps1 {
+ regulator-name = "vreg_s1f_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2f_0p5: smps2 {
+ regulator-name = "vreg_s2f_0p5";
+ regulator-min-microvolt = <512000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L1 is unused. */
+
+ vreg_l2f_1p3: ldo2 {
+ regulator-name = "vreg_l2f_1p3";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L3 & L4 are unused. */
+
+ vreg_l5f_2p8: ldo5 {
+ regulator-name = "vreg_l5f_2p85";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p8: ldo6 {
+ regulator-name = "vreg_l6f_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7f_1p8: ldo7 {
+ regulator-name = "vreg_l7f_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&cdsp {
+ firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+ status = "okay";
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ fuel-gauge@55 {
+ compatible = "ti,bq27z561";
+ reg = <0x55>;
+ monitored-battery = <&battery_r>;
+ };
+};
+
+&i2c11 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ backlight: backlight@11 {
+ compatible = "kinetic,ktz8866";
+ reg = <0x11>;
+ vddpos-supply = <&bl_vddpos_5p5>;
+ vddneg-supply = <&bl_vddneg_5p5>;
+ enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+ current-num-sinks = <5>;
+ kinetic,current-ramp-delay-ms = <128>;
+ kinetic,led-enable-ramp-delay-ms = <1>;
+ kinetic,enable-lcd-bias;
+ };
+};
+
+&i2c13 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ fuel-gauge@55 {
+ compatible = "ti,bq27z561";
+ reg = <0x55>;
+ monitored-battery = <&battery_l>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+ status = "okay";
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+ status = "okay";
+};
firmware {
scm: scm {
compatible = "qcom,scm-sm8250", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
qcom,bcm-voters = <&apps_bcm_voter>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
status = "disabled";
};
- pcie2: pci@1c10000 {
+ pcie2: pcie@1c10000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c10000 0 0x3000>,
<0 0x64000000 0 0xf1d>,
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
+
+ operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-37500000 {
+ opp-hz = /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8250-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&rpmhcc RPMH_CXO_CLK>,
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x16c>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x16c>,
- <0 0x01d87a00 0 0x200>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sm8250-tcsr", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
status = "disabled";
};
- swr0: soundwire-controller@3250000 {
+ swr0: soundwire@3250000 {
reg = <0 0x03250000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
#sound-dai-cells = <1>;
};
- swr1: soundwire-controller@3210000 {
+ swr1: soundwire@3210000 {
reg = <0 0x03210000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
status = "disabled";
};
/* tx macro */
- swr2: soundwire-controller@3230000 {
+ swr2: soundwire@3230000 {
reg = <0 0x03230000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port {
tpda_out_funnel_qatb: endpoint {
remote-endpoint = <&funnel_qatb_in_tpda>;
};
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
funnel_qatb_in_tpda: endpoint {
remote-endpoint = <&tpda_out_funnel_qatb>;
};
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port {
etf_in_funnel_swao_out: endpoint {
remote-endpoint = <&funnel_swao_out_etf>;
};
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
port {
tpdm_mm_out_tpda9: endpoint {
remote-endpoint = <&tpda_9_in_tpdm_mm>;
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
funnel_apss_merg_in_funnel_apss: endpoint {
remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8250-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x200>,
- <0 0x088eb400 0 0x200>,
- <0 0x088eb800 0 0x800>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ status = "disabled";
};
sdhc_2: mmc@8804000 {
"dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
+ wakeup-source;
resets = <&gcc GCC_USB30_PRIM_BCR>;
"dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
+ wakeup-source;
resets = <&gcc GCC_USB30_SEC_BCR>;
iommus = <&apps_smmu 0x20 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
firmware {
scm: scm {
compatible = "qcom,scm-sm8350", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
<0>,
<0>,
<0>,
- <&ufs_mem_phy_lanes 0>,
- <&ufs_mem_phy_lanes 1>,
- <&ufs_mem_phy_lanes 2>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>;
};
};
};
- gpi_dma0: dma-controller@9800000 {
+ gpi_dma0: dma-controller@900000 {
compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
- reg = <0 0x09800000 0 0x60000>;
+ reg = <0 0x00900000 0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
qcom,bcm-voters = <&apps_bcm_voter>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8350";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8350";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&rpmhcc RPMH_CXO_CLK>,
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sm8350-tcsr", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8350-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0 0x20000>,
compatible = "qcom,sm8350-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
- interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
compatible = "qcom,sm8350-slpi-pas";
reg = <0 0x05c00000 0 0x4000>;
- interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
};
};
- usb_2_qmpphy: phy-wrapper@88eb000 {
+ usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8350-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
+ reg = <0 0x088eb000 0 0x2000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- usb_2_ssphy: phy@88ebe00 {
- reg = <0 0x088ebe00 0 0x200>,
- <0 0x088ec000 0 0x200>,
- <0 0x088eb200 0 0x1100>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
};
dc_noc: interconnect@90c0000 {
iommus = <&apps_smmu 0x20 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
#size-cells = <2>;
ranges;
- dpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- /* TODO: opp-200000000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
-
- opp-345000000 {
- opp-hz = /bits/ 64 <345000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
-
- opp-460000000 {
- opp-hz = /bits/ 64 <460000000>;
- required-opps = <&rpmhpd_opp_nom>;
- };
- };
-
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm8350-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
interrupt-parent = <&mdss>;
interrupts = <0>;
+ dpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-200000000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
compatible = "qcom,sm8350-adsp-pas";
reg = <0 0x17300000 0 0x100>;
- interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
compatible = "qcom,sm8350-cdsp-pas";
reg = <0 0x98900000 0 0x1400000>;
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
status = "okay";
};
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8450/a730_zap.mbn";
+ };
+};
+
&i2c9 {
clock-frequency = <400000>;
status = "okay";
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sm8450-camcc.h>
#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
#include <dt-bindings/clock/qcom,sm8450-videocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
<&pcie0_phy>,
<&pcie1_phy>,
<0>,
- <&ufs_mem_phy_lanes 0>,
- <&ufs_mem_phy_lanes 1>,
- <&ufs_mem_phy_lanes 2>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
clock-names = "bi_tcxo",
"sleep_clk",
};
};
- pcie0: pci@1c00000 {
+ rng: rng@10c3000 {
+ compatible = "qcom,sm8450-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8450-pcie0";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8450-pcie1";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
reg = <0x0 0x1fc0000 0x0 0x30000>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-730.1", "qcom,adreno";
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x1000>,
+ <0x0 0x03d61000 0x0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x400>,
+ <&adreno_smmu 1 0x400>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&gpu_micro_code_mem>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-818000000 {
+ opp-hz = /bits/ 64 <818000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-791000000 {
+ opp-hz = /bits/ 64 <791000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-734000000 {
+ opp-hz = /bits/ 64 <734000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-640000000 {
+ opp-hz = /bits/ 64 <640000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ opp-599000000 {
+ opp-hz = /bits/ 64 <599000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-545000000 {
+ opp-hz = /bits/ 64 <545000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-492000000 {
+ opp-hz = /bits/ 64 <492000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-421000000 {
+ opp-hz = /bits/ 64 <421000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-317000000 {
+ opp-hz = /bits/ 64 <317000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-285000000 {
+ opp-hz = /bits/ 64 <285000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ opp-220000000 {
+ opp-hz = /bits/ 64 <220000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x35000>,
+ <0x0 0x03d50000 0x0 0x10000>,
+ <0x0 0x0b290000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_DEMET_CLK>;
+ clock-names = "ahb",
+ "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "hub",
+ "demet";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x400>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm8450-gpucc";
+ reg = <0x0 0x03d90000 0x0 0xa000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x03da0000 0x0 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>;
+ clock-names = "gmu",
+ "hub",
+ "hlos",
+ "bus",
+ "iface",
+ "ahb";
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8450-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>, <19200000>;
#clock-cells = <0>;
clock-output-names = "wsa2-mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&wsa2_swr_active>;
#sound-dai-cells = <1>;
};
- swr4: soundwire-controller@31f0000 {
+ swr4: soundwire@31f0000 {
compatible = "qcom,soundwire-v1.7.0";
reg = <0 0x031f0000 0 0x2000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface";
label = "WSA2";
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <2>;
qcom,dout-ports = <6>;
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>, <19200000>;
-
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&rx_swr_active>;
#sound-dai-cells = <1>;
};
- swr1: soundwire-controller@3210000 {
+ swr1: soundwire@3210000 {
compatible = "qcom,soundwire-v1.7.0";
reg = <0 0x03210000 0 0x2000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
qcom,din-ports = <0>;
qcom,dout-ports = <5>;
+ pinctrl-0 = <&rx_swr_active>;
+ pinctrl-names = "default";
+
qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>, <19200000>;
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&tx_swr_active>;
#sound-dai-cells = <1>;
};
<&vamacro>;
clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
- <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>, <19200000>;
-
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&wsa_swr_active>;
#sound-dai-cells = <1>;
};
- swr0: soundwire-controller@3250000 {
+ swr0: soundwire@3250000 {
compatible = "qcom,soundwire-v1.7.0";
reg = <0 0x03250000 0 0x2000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface";
label = "WSA";
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <2>;
qcom,dout-ports = <6>;
status = "disabled";
};
- swr2: soundwire-controller@33b0000 {
+ swr2: soundwire@33b0000 {
compatible = "qcom,soundwire-v1.7.0";
reg = <0 0x033b0000 0 0x2000>;
interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core", "wakeup";
- clocks = <&vamacro>;
+ clocks = <&txmacro>;
clock-names = "iface";
label = "TX";
+ pinctrl-0 = <&tx_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <4>;
qcom,dout-ports = <0>;
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "mclk", "macro", "dcodec", "npl";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "fsgen";
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8450-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref", "ref_aux", "qref";
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x188>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x188>,
- <0 0x01d87a00 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
ice: crypto@1d88000 {
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p8>;
+ vdd-l6-supply = <&vreg_s6g_1p8>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p056: ldo1 {
+ regulator-name = "vreg_l1m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_1p8: ldo6 {
+ regulator-name = "vreg_l6m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p8>;
+ vdd-l6-supply = <&vreg_bob1>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p1: ldo2 {
+ regulator-name = "vreg_l2n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_3p3: ldo6 {
+ regulator-name = "vreg_l6n_3p3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_2p96: ldo7 {
+ regulator-name = "vreg_l7n_2p96";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8550/a740_zap.mbn";
+ };
};
&i2c_master_hub_0 {
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p86>;
+ vdd-l6-supply = <&vreg_s6g_1p86>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p056: ldo1 {
+ regulator-name = "vreg_l1m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_1p8: ldo6 {
+ regulator-name = "vreg_l6m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p86>;
+ vdd-l6-supply = <&vreg_bob1>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p1: ldo2 {
+ regulator-name = "vreg_l2n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_3p3: ldo6 {
+ regulator-name = "vreg_l6n_3p3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_2p96: ldo7 {
+ regulator-name = "vreg_l7n_2p96";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&i2c_master_hub_0 {
};
};
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sm8550/ipa_fws.mbn";
+ status = "okay";
+};
+
&gcc {
clocks = <&bi_tcxo_div2>, <&sleep_clk>,
<&pcie0_phy>,
<&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
};
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ firmware-name = "qcom/sm8550/a740_zap.mbn";
+ };
+};
+
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio17";
compatible = "arm,idle-state";
idle-state-name = "silver-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <800>;
+ entry-latency-us = <550>;
exit-latency-us = <750>;
- min-residency-us = <4090>;
+ min-residency-us = <6700>;
local-timer-stop;
};
idle-state-name = "gold-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <600>;
- exit-latency-us = <1550>;
- min-residency-us = <4791>;
+ exit-latency-us = <1300>;
+ min-residency-us = <8136>;
+ local-timer-stop;
+ };
+
+ PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "goldplus-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1350>;
+ min-residency-us = <7480>;
local-timer-stop;
};
};
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000044>;
- entry-latency-us = <1050>;
- exit-latency-us = <2500>;
- min-residency-us = <5309>;
+ entry-latency-us = <750>;
+ exit-latency-us = <2350>;
+ min-residency-us = <9144>;
};
CLUSTER_SLEEP_1: cluster-sleep-1 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x4100c344>;
- entry-latency-us = <2700>;
- exit-latency-us = <3500>;
- min-residency-us = <13959>;
+ entry-latency-us = <2800>;
+ exit-latency-us = <4400>;
+ min-residency-us = <10150>;
};
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sm8550", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x19000>;
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
};
};
CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ domain-idle-states = <&PRIME_CPU_SLEEP_0>;
};
CLUSTER_PD: power-domain-cluster {
qcom,bcm-voters = <&apps_bcm_voter>;
};
- pcie0: pci@1c00000 {
+ rng: rng@10c3000 {
+ compatible = "qcom,sm8550-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
+ pcie0: pcie@1c00000 {
device_type = "pci";
compatible = "qcom,pcie-sm8550";
reg = <0 0x01c00000 0 0x3000>,
status = "disabled";
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
device_type = "pci";
compatible = "qcom,pcie-sm8550";
reg = <0x0 0x01c08000 0x0 0x3000>,
#reset-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-43050a01", "qcom,adreno";
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x1000>,
+ <0x0 0x03d61000 0x0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x0>,
+ <&adreno_smmu 1 0x0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&gpu_micro_code_mem>;
+ };
+
+ /* Speedbin needs more work on A740+, keep only lower freqs */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-680000000 {
+ opp-hz = /bits/ 64 <680000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-615000000 {
+ opp-hz = /bits/ 64 <615000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-475000000 {
+ opp-hz = /bits/ 64 <475000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-401000000 {
+ opp-hz = /bits/ 64 <401000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-348000000 {
+ opp-hz = /bits/ 64 <348000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ opp-295000000 {
+ opp-hz = /bits/ 64 <295000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ opp-220000000 {
+ opp-hz = /bits/ 64 <220000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x35000>,
+ <0x0 0x03d50000 0x0 0x10000>,
+ <0x0 0x0b280000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_DEMET_CLK>;
+ clock-names = "ahb",
+ "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "hub",
+ "demet";
+
+ power-domains = <&gpucc GPU_CC_CX_GDSC>,
+ <&gpucc GPU_CC_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x0>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
gpucc: clock-controller@3d90000 {
compatible = "qcom,sm8550-gpucc";
reg = <0 0x03d90000 0 0xa000>;
#power-domain-cells = <1>;
};
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x03da0000 0x0 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>;
+ clock-names = "hlos",
+ "bus",
+ "iface",
+ "ahb";
+ power-domains = <&gpucc GPU_CC_CX_GDSC>;
+ dma-coherent;
+ };
+
+ ipa: ipa@3f40000 {
+ compatible = "qcom,sm8550-ipa";
+
+ iommus = <&apps_smmu 0x4a0 0x0>,
+ <&apps_smmu 0x4a2 0x0>;
+ reg = <0 0x3f40000 0 0x10000>,
+ <0 0x3f50000 0 0x5000>,
+ <0 0x3e04000 0 0xfc000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+ interconnect-names = "memory",
+ "config";
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sm8550-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "wsa2-mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&wsa2_swr_active>;
#sound-dai-cells = <1>;
};
- swr3: soundwire-controller@6ab0000 {
+ swr3: soundwire@6ab0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ab0000 0 0x10000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface";
label = "WSA2";
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>;
-
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&rx_swr_active>;
#sound-dai-cells = <1>;
};
- swr1: soundwire-controller@6ad0000 {
+ swr1: soundwire@6ad0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ad0000 0 0x10000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface";
label = "RX";
- qcom,din-ports = <0>;
- qcom,dout-ports = <10>;
+ pinctrl-0 = <&rx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <1>;
+ qcom,dout-ports = <11>;
- qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
- qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
- qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
- qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
- qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
- qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
- assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&tx_swr_active>;
#sound-dai-cells = <1>;
};
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>;
-
#clock-cells = <0>;
clock-output-names = "mclk";
- pinctrl-names = "default";
- pinctrl-0 = <&wsa_swr_active>;
#sound-dai-cells = <1>;
};
- swr0: soundwire-controller@6b10000 {
+ swr0: soundwire@6b10000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06b10000 0 0x10000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface";
label = "WSA";
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
status = "disabled";
};
- swr2: soundwire-controller@6d30000 {
+ swr2: soundwire@6d30000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06d30000 0 0x10000>;
interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core", "wakeup";
- clocks = <&lpass_vamacro>;
+ clocks = <&lpass_txmacro>;
clock-names = "iface";
label = "TX";
+ pinctrl-0 = <&tx_swr_active>;
+ pinctrl-names = "default";
+
qcom,din-ports = <4>;
qcom,dout-ports = <0>;
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "mclk", "macro", "dcodec";
- assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
- assigned-clock-rates = <19200000>;
-
#clock-cells = <0>;
clock-output-names = "fsgen";
#sound-dai-cells = <1>;
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 15 IRQ_TYPE_EDGE_RISING>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SM8650 MTP";
+ compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+ aliases {
+ serial0 = &uart15;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8650-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s1c_1p2>;
+ vdd-l12-supply = <&vreg_s6c_1p8>;
+ vdd-l15-supply = <&vreg_s6c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ qcom,pmic-id = "b";
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s1c_1p2>;
+ vdd-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "c";
+
+ vreg_s1c_1p2: smps1 {
+ regulator-name = "vreg_s1c_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1348000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2c_0p8: smps2 {
+ regulator-name = "vreg_s2c_0p8";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <1036000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3c_0p9: smps3 {
+ regulator-name = "vreg_s3c_0p9";
+ regulator-min-microvolt = <976000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4c_1p2: smps4 {
+ regulator-name = "vreg_s4c_1p2";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1280000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5c_0p7: smps5 {
+ regulator-name = "vreg_s5c_0p7";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6c_1p8: smps6 {
+ regulator-name = "vreg_s6c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-name = "vreg_l3c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "d";
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "e";
+
+ vreg_l3e_0p9: ldo3 {
+ regulator-name = "vreg_l3e_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "g";
+
+ vreg_l1g_0p91: ldo1 {
+ regulator-name = "vreg_l1g_0p91";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_0p91: ldo3 {
+ regulator-name = "vreg_l3g_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l2-supply = <&vreg_s3c_0p9>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "i";
+
+ vreg_s4i_0p85: smps4 {
+ regulator-name = "vreg_s4i_0p85";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_0p88: ldo1 {
+ regulator-name = "vreg_l1i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_0p88: ldo2 {
+ regulator-name = "vreg_l2i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_1p2: ldo3 {
+ regulator-name = "vreg_l3i_0p91";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc {
+ status = "okay";
+};
+
+&lpass_tlmm {
+ spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ vddio-supply = <&vreg_l12b_1p8>;
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+
+ pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+ pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+ pinctrl-names = "default", "sleep";
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1i_0p88>;
+
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+ clock-frequency = <1000>;
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1i_0p88>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l3e_0p9>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+ vdda-qref-supply = <&vreg_l1i_0p88>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio12";
+ function = "normal";
+ bias-pull-up;
+ input-enable;
+ output-disable;
+ power-source = <1>; /* 1.8 V */
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8650/adsp.mbn",
+ "qcom/sm8650/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8650/cdsp.mbn",
+ "qcom/sm8650/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8650/modem.mbn",
+ "qcom/sm8650/modem_dtb.mbn";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l8b_1p8>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+
+ pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&swr0 {
+ status = "okay";
+
+ /* WSA8845, Speaker Left */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ pinctrl-0 = <&spkr_1_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l3c_1p2>;
+ };
+
+ /* WSA8845, Speaker Right */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ pinctrl-0 = <&spkr_2_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l3c_1p2>;
+ };
+};
+
+&tlmm {
+ /* Reserved I/Os for NFC */
+ gpio-reserved-ranges = <32 8>, <74 1>;
+
+ disp0_reset_n_active: disp0-reset-n-active-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdp_vsync_active: mdp-vsync-active-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdp_vsync_suspend: mdp-vsync-suspend-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+ pins = "gpio77";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&uart15 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1c_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1i_0p88>;
+ vdda12-supply = <&vreg_l3i_1p2>;
+
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3i_1p2>;
+ vdda-pll-supply = <&vreg_l3g_0p91>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SM8650 QRD";
+ compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+ aliases {
+ serial0 = &uart15;
+ serial1 = &uart14;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8650-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s1c_1p2>;
+ vdd-l12-supply = <&vreg_s6c_1p8>;
+ vdd-l15-supply = <&vreg_s6c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ qcom,pmic-id = "b";
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s1c_1p2>;
+ vdd-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "c";
+
+ vreg_s1c_1p2: smps1 {
+ regulator-name = "vreg_s1c_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1348000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2c_0p8: smps2 {
+ regulator-name = "vreg_s2c_0p8";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <1036000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3c_0p9: smps3 {
+ regulator-name = "vreg_s3c_0p9";
+ regulator-min-microvolt = <976000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4c_1p2: smps4 {
+ regulator-name = "vreg_s4c_1p2";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1280000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5c_0p7: smps5 {
+ regulator-name = "vreg_s5c_0p7";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6c_1p8: smps6 {
+ regulator-name = "vreg_s6c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-name = "vreg_l3c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "d";
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "e";
+
+ vreg_l3e_0p9: ldo3 {
+ regulator-name = "vreg_l3e_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l3-supply = <&vreg_s3c_0p9>;
+
+ qcom,pmic-id = "g";
+
+ vreg_l1g_0p91: ldo1 {
+ regulator-name = "vreg_l1g_0p91";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_0p91: ldo3 {
+ regulator-name = "vreg_l3g_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3c_0p9>;
+ vdd-l2-supply = <&vreg_s3c_0p9>;
+ vdd-l3-supply = <&vreg_s1c_1p2>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "i";
+
+ vreg_s4i_0p85: smps4 {
+ regulator-name = "vreg_s4i_0p85";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_0p88: ldo1 {
+ regulator-name = "vreg_l1i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_0p88: ldo2 {
+ regulator-name = "vreg_l2i_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_1p2: ldo3 {
+ regulator-name = "vreg_l3i_0p91";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sm8650/ipa_fws.mbn";
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ vddio-supply = <&vreg_l12b_1p8>;
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+
+ pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+ pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+ pinctrl-names = "default", "sleep";
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1i_0p88>;
+
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+ clock-frequency = <1000>;
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1i_0p88>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&pm8550_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <2000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <0>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <2>, <3>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <2000000>;
+ flash-max-timeout-us = <1280000>;
+ function-enumerator = <1>;
+ };
+};
+
+&pm8550_gpios {
+ volume_up_n: volume-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-pull-up;
+ input-enable;
+ power-source = <1>;
+ };
+};
+
+&pm8550_pwm {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8650/adsp.mbn",
+ "qcom/sm8650/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8650/cdsp.mbn",
+ "qcom/sm8650/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8650/modem.mbn",
+ "qcom/sm8650/modem_dtb.mbn";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&spi4 {
+ status = "okay";
+
+ touchscreen@0 {
+ compatible = "goodix,gt9916";
+ reg = <0>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&vreg_l14b_3p2>;
+
+ spi-max-frequency = <1000000>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <2400>;
+
+ pinctrl-0 = <&ts_irq>, <&ts_reset>;
+ pinctrl-names = "default";
+ };
+};
+
+&tlmm {
+ /* Reserved I/Os for NFC */
+ gpio-reserved-ranges = <32 8>, <74 1>;
+
+ bt_default: bt-default-state {
+ bt-en-pins {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sw-ctrl-pins {
+ pins = "gpio18";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ disp0_reset_n_active: disp0-reset-n-active-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdp_vsync_active: mdp-vsync-active-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdp_vsync_suspend: mdp-vsync-suspend-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_irq: ts-irq-state {
+ pins = "gpio161";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-disable;
+ };
+
+ ts_reset: ts-reset-state {
+ pins = "gpio162";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+ vddio-supply = <&vreg_l3c_1p2>;
+ vddaon-supply = <&vreg_l15b_1p8>;
+ vdddig-supply = <&vreg_s3c_0p9>;
+ vddrfa0p8-supply = <&vreg_s3c_0p9>;
+ vddrfa1p2-supply = <&vreg_s1c_1p2>;
+ vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+ max-speed = <3200000>;
+
+ enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&bt_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&uart15 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1c_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3i_1p2>;
+
+ status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1i_0p88>;
+ vdda12-supply = <&vreg_l3i_1p2>;
+
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3i_1p2>;
+ vdda-pll-supply = <&vreg_l3g_0p91>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a520";
+ reg = <0 0>;
+
+ clocks = <&cpufreq_hw 0>;
+
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+
+ qcom,freq-domain = <&cpufreq_hw 0>;
+
+ #cooling-cells = <2>;
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+
+ L3_0: l3-cache {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-unified;
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a520";
+ reg = <0 0x100>;
+
+ clocks = <&cpufreq_hw 0>;
+
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+
+ qcom,freq-domain = <&cpufreq_hw 0>;
+
+ #cooling-cells = <2>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a720";
+ reg = <0 0x200>;
+
+ clocks = <&cpufreq_hw 3>;
+
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ capacity-dmips-mhz = <1792>;
+ dynamic-power-coefficient = <238>;
+
+ qcom,freq-domain = <&cpufreq_hw 3>;
+
+ #cooling-cells = <2>;
+
+ L2_200: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a720";
+ reg = <0 0x300>;
+
+ clocks = <&cpufreq_hw 3>;
+
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ capacity-dmips-mhz = <1792>;
+ dynamic-power-coefficient = <238>;
+
+ qcom,freq-domain = <&cpufreq_hw 3>;
+
+ #cooling-cells = <2>;
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a720";
+ reg = <0 0x400>;
+
+ clocks = <&cpufreq_hw 3>;
+
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ capacity-dmips-mhz = <1792>;
+ dynamic-power-coefficient = <238>;
+
+ qcom,freq-domain = <&cpufreq_hw 3>;
+
+ #cooling-cells = <2>;
+
+ L2_400: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a720";
+ reg = <0 0x500>;
+
+ clocks = <&cpufreq_hw 1>;
+
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ capacity-dmips-mhz = <1792>;
+ dynamic-power-coefficient = <238>;
+
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ #cooling-cells = <2>;
+
+ L2_500: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a720";
+ reg = <0 0x600>;
+
+ clocks = <&cpufreq_hw 1>;
+
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ capacity-dmips-mhz = <1792>;
+ dynamic-power-coefficient = <238>;
+
+ qcom,freq-domain = <&cpufreq_hw 1>;
+
+ #cooling-cells = <2>;
+
+ L2_600: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-x4";
+ reg = <0 0x700>;
+
+ clocks = <&cpufreq_hw 2>;
+
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <588>;
+
+ qcom,freq-domain = <&cpufreq_hw 2>;
+
+ #cooling-cells = <2>;
+
+ L2_700: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "silver-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <550>;
+ exit-latency-us = <750>;
+ min-residency-us = <6700>;
+ local-timer-stop;
+ };
+
+ GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <600>;
+ exit-latency-us = <1300>;
+ min-residency-us = <8136>;
+ local-timer-stop;
+ };
+
+ GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-plus-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1350>;
+ min-residency-us = <7480>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000044>;
+ entry-latency-us = <750>;
+ exit-latency-us = <2350>;
+ min-residency-us = <9144>;
+ };
+
+ CLUSTER_SLEEP_1: cluster-sleep-1 {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x4100c344>;
+ entry-latency-us = <2800>;
+ exit-latency-us = <4400>;
+ min-residency-us = <10150>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm8650", "qcom,scm";
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ };
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,sm8650-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,sm8650-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@a0000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0xa0000000 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: power-domain-cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: power-domain-cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: power-domain-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>,
+ <&CLUSTER_SLEEP_1>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: hyp@80000000 {
+ reg = <0 0x80000000 0 0xe00000>;
+ no-map;
+ };
+
+ cpusys_vm_mem: cpusys-vm@80e00000 {
+ reg = <0 0x80e00000 0 0x400000>;
+ no-map;
+ };
+
+ /* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+ xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+ reg = <0 0x81a00000 0 0x260000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x81c60000 0 0x20000>;
+ no-map;
+ };
+
+ /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+ aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+ reg = <0 0x81c80000 0 0x74000>;
+ no-map;
+ };
+
+ /* Secdata region can be reused by apps */
+
+ smem: smem@81d00000 {
+ compatible = "qcom,smem";
+ reg = <0 0x81d00000 0 0x200000>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
+ };
+
+ adsp_mhi_mem: adsp-mhi@81f00000 {
+ reg = <0 0x81f00000 0 0x20000>;
+ no-map;
+ };
+
+ pvmfw_mem: pvmfw@824a0000 {
+ reg = <0 0x824a0000 0 0x100000>;
+ no-map;
+ };
+
+ global_sync_mem: global-sync@82600000 {
+ reg = <0 0x82600000 0 0x100000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@82700000 {
+ reg = <0 0x82700000 0 0x100000>;
+ no-map;
+ };
+
+ qdss_mem: qdss@82800000 {
+ reg = <0 0x82800000 0 0x2000000>;
+ no-map;
+ };
+
+ mpss_dsm_mem: mpss-dsm@86b00000 {
+ reg = <0 0x86b00000 0 0x4900000>;
+ no-map;
+ };
+
+ mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+ reg = <0 0x8b400000 0 0x800000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8bc00000 {
+ reg = <0 0x8bc00000 0 0xf400000>;
+ no-map;
+ };
+
+ q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+ reg = <0 0x9b000000 0 0x80000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@9b080000 {
+ reg = <0 0x9b080000 0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@9b090000 {
+ reg = <0 0x9b090000 0 0xa000>;
+ no-map;
+ };
+
+ gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+ reg = <0 0x9b09a000 0 0x2000>;
+ no-map;
+ };
+
+ spss_region_mem: spss@9b0a0000 {
+ reg = <0 0x9b0a0000 0 0x1e0000>;
+ no-map;
+ };
+
+ /* First part of the "SPU secure shared memory" region */
+ spu_tz_shared_mem: spu-tz-shared@9b280000 {
+ reg = <0 0x9b280000 0 0x60000>;
+ no-map;
+ };
+
+ /* Second part of the "SPU secure shared memory" region */
+ spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+ reg = <0 0x9b2e0000 0 0x20000>;
+ no-map;
+ };
+
+ camera_mem: camera@9b300000 {
+ reg = <0 0x9b300000 0 0x800000>;
+ no-map;
+ };
+
+ video_mem: video@9bb00000 {
+ reg = <0 0x9bb00000 0 0x800000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@9c300000 {
+ reg = <0 0x9c300000 0 0x700000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@9ca00000 {
+ reg = <0 0x9ca00000 0 0x1400000>;
+ no-map;
+ };
+
+ q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+ reg = <0 0x9de00000 0 0x80000>;
+ no-map;
+ };
+
+ q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+ reg = <0 0x9de80000 0 0x80000>;
+ no-map;
+ };
+
+ adspslpi_mem: adspslpi@9df00000 {
+ reg = <0 0x9df00000 0 0x4080000>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@d7c00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xd7c00000 0 0x400000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+ };
+
+ /* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+ tz_merged_mem: tz-merged@d8000000 {
+ reg = <0 0xd8000000 0 0x800000>;
+ no-map;
+ };
+
+ hwfence_shbuf: hwfence-shbuf@e6440000 {
+ reg = <0 0xe6440000 0 0x2dd000>;
+ no-map;
+ };
+
+ trust_ui_vm_mem: trust-ui-vm@f3800000 {
+ reg = <0 0xf3800000 0 0x4400000>;
+ no-map;
+ };
+
+ oem_vm_mem: oem-vm@f7c00000 {
+ reg = <0 0xf7c00000 0 0x4c00000>;
+ no-map;
+ };
+
+ llcc_lpi_mem: llcc-lpi@ff800000 {
+ reg = <0 0xff800000 0 0x600000>;
+ no-map;
+ };
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <443>, <429>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <435>, <428>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ smp2p_modem_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_modem_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ ranges = <0 0 0 0 0x10 0>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sm8650-gcc";
+ reg = <0 0x00100000 0 0x1f4200>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <&pcie_1_phy_aux_clk>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ ipcc: mailbox@406000 {
+ compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+ reg = <0 0x00406000 0 0x1000>;
+
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ #mbox-cells = <2>;
+ };
+
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3f>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x436 0>;
+
+ dma-coherent;
+
+ status = "disabled";
+ };
+
+ qupv3_id_1: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x423 0>;
+
+ dma-coherent;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c8: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi8: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c9: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi9: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c10: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi10: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c11: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi11: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c12: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi12: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c13: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi13: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart14: serial@898000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ uart15: serial@89c000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart15_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+ };
+
+ i2c_master_hub_0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-i2c-master-hub";
+ reg = <0 0x009c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+ clock-names = "s-ahb";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c_hub_0: i2c@980000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00980000 0 0x4000>;
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_1: i2c@984000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00984000 0 0x4000>;
+
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_2: i2c@988000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00988000 0 0x4000>;
+
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_3: i2c@98c000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x0098c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_4: i2c@990000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00990000 0 0x4000>;
+
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_5: i2c@994000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00994000 0 0x4000>;
+
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_6: i2c@998000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00998000 0 0x4000>;
+
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_7: i2c@99c000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x0099c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_8: i2c@9a0000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x009a0000 0 0x4000>;
+
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_9: i2c@9a4000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x009a4000 0 0x4000>;
+
+ interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0xc>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0xb6 0>;
+ dma-coherent;
+
+ status = "disabled";
+ };
+
+ qupv3_id_0: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core";
+
+ iommus = <&apps_smmu 0xa3 0>;
+
+ dma-coherent;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c0: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi4: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi7: spi@a9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ cnoc_main: interconnect@1500000 {
+ compatible = "qcom,sm8650-cnoc-main";
+ reg = <0 0x01500000 0 0x14080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ config_noc: interconnect@1600000 {
+ compatible = "qcom,sm8650-config-noc";
+ reg = <0 0x01600000 0 0x6200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,sm8650-system-noc";
+ reg = <0 0x01680000 0 0x1d080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_noc: interconnect@16c0000 {
+ compatible = "qcom,sm8650-pcie-anoc";
+ reg = <0 0x016c0000 0 0x12200>;
+
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sm8650-aggre1-noc";
+ reg = <0 0x016e0000 0 0x16400>;
+
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sm8650-aggre2-noc";
+ reg = <0 0x01700000 0 0x1e400>;
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ mmss_noc: interconnect@1780000 {
+ compatible = "qcom,sm8650-mmss-noc";
+ reg = <0 0x01780000 0 0x5b800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ rng: rng@10c3000 {
+ compatible = "qcom,sm8650-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
+ pcie0: pci@1c00000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ iommu-map = <0 &apps_smmu 0x1400 0x1>,
+ <0x100 &apps_smmu 0x1401 0x1>;
+
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ #interrupt-cells = <1>;
+
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+ bus-range = <0 0xff>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+ <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+ dma-coherent;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c06000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ pcie1: pci@1c08000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>,
+ <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ iommu-map = <0 &apps_smmu 0x1480 0x1>,
+ <0x100 &apps_smmu 0x1481 0x1>;
+
+ interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ #interrupt-cells = <1>;
+
+ linux,pci-domain = <1>;
+ num-lanes = <2>;
+ bus-range = <0 0xff>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ dma-coherent;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+ <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0e000 {
+ compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+ <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+ reset-names = "phy",
+ "phy_nocsr";
+
+ power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x28000>;
+
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+ #dma-cells = <1>;
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+ };
+
+ ufs_mem_phy: phy@1d80000 {
+ compatible = "qcom,sm8650-qmp-ufs-phy";
+ reg = <0 0x01d80000 0 0x2000>;
+
+ clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clock-names = "ref",
+ "ref_aux";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <100000000 403000000>,
+ <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x60 0>;
+
+ lanes-per-direction = <2>;
+ qcom,ice = <&ice>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ status = "disabled";
+ };
+
+ ice: crypto@1d88000 {
+ compatible = "qcom,sm8650-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0 0x01d88000 0 0x8000>;
+
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0 0x01f40000 0 0x20000>;
+
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: clock-controller@1fc0000 {
+ compatible = "qcom,sm8650-tcsr", "syscon";
+ reg = <0 0x01fc0000 0 0xa0000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm8650-gpucc";
+ reg = <0 0x03d90000 0 0xa000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ ipa: ipa@3f40000 {
+ compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+ iommus = <&apps_smmu 0x4a0 0x0>,
+ <&apps_smmu 0x4a2 0x0>;
+ reg = <0 0x3f40000 0 0x10000>,
+ <0 0x3f50000 0 0x5000>,
+ <0 0x3e04000 0 0xfc000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+ interconnect-names = "memory",
+ "config";
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sm8650-mpss-pas";
+ reg = <0 0x04080000 0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
+ power-domain-names = "cx",
+ "mss";
+
+ memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+ <&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <1>;
+
+ label = "mpss";
+ };
+ };
+
+ lpass_wsa2macro: codec@6aa0000 {
+ compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+ reg = <0 0x06aa0000 0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "wsa2-mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ swr3: soundwire@6ab0000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06ab0000 0 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsa2macro>;
+ clock-names = "iface";
+ label = "WSA2";
+
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_rxmacro: codec@6ac0000 {
+ compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+ reg = <0 0x06ac0000 0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ swr1: soundwire@6ad0000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06ad0000 0 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_rxmacro>;
+ clock-names = "iface";
+ label = "RX";
+
+ pinctrl-0 = <&rx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <0>;
+ qcom,dout-ports = <11>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_txmacro: codec@6ae0000 {
+ compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+ reg = <0 0x06ae0000 0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ lpass_wsamacro: codec@6b00000 {
+ compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+ reg = <0 0x06b00000 0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_vamacro>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ swr0: soundwire@6b10000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06b10000 0 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsamacro>;
+ clock-names = "iface";
+ label = "WSA";
+
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ swr2: soundwire@6d30000 {
+ compatible = "qcom,soundwire-v2.0.0";
+ reg = <0 0x06d30000 0 0x10000>;
+ interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "core", "wakeup";
+ clocks = <&lpass_txmacro>;
+ clock-names = "iface";
+ label = "TX";
+
+ pinctrl-0 = <&tx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <0>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ lpass_vamacro: codec@6d44000 {
+ compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+ reg = <0 0x06d44000 0 0x1000>;
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec";
+
+ #clock-cells = <0>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
+ lpass_tlmm: pinctrl@6e80000 {
+ compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+ reg = <0 0x06e80000 0 0x20000>;
+
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+ tx_swr_active: tx-swr-active-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio1", "gpio2", "gpio14";
+ function = "swr_tx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ rx_swr_active: rx-swr-active-state {
+ clk-pins {
+ pins = "gpio3";
+ function = "swr_rx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5";
+ function = "swr_rx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ dmic01_default: dmic01-default-state {
+ clk-pins {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data-pins {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ dmic02_default: dmic02-default-state {
+ clk-pins {
+ pins = "gpio8";
+ function = "dmic2_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data-pins {
+ pins = "gpio9";
+ function = "dmic2_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ wsa_swr_active: wsa-swr-active-state {
+ clk-pins {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+
+ wsa2_swr_active: wsa2-swr-active-state {
+ clk-pins {
+ pins = "gpio15";
+ function = "wsa2_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio16";
+ function = "wsa2_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+ };
+
+ lpass_lpiaon_noc: interconnect@7400000 {
+ compatible = "qcom,sm8650-lpass-lpiaon-noc";
+ reg = <0 0x07400000 0 0x19080>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_lpicx_noc: interconnect@7430000 {
+ compatible = "qcom,sm8650-lpass-lpicx-noc";
+ reg = <0 0x07430000 0 0x3a200>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_ag_noc: interconnect@7e40000 {
+ compatible = "qcom,sm8650-lpass-ag-noc";
+ reg = <0 0x07e40000 0 0xe080>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ sdhc_2: mmc@8804000 {
+ compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ iommus = <&apps_smmu 0x540 0>;
+
+ bus-width = <4>;
+
+ /* Forbid SDR104/SDR50 - broken hw! */
+ sdhci-caps-mask = <0x3 0>;
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+
+ dma-coherent;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,sm8650-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+ <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sm8650-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@ae94000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae95000 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0 0x0ae95000 0 0x200>,
+ <0 0x0ae95200 0 0x280>,
+ <0 0x0ae95500 0 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae97000 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0 0x0ae97000 0 0x200>,
+ <0 0x0ae97200 0 0x280>,
+ <0 0x0ae97500 0 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dp0: displayport-controller@af54000 {
+ compatible = "qcom,sm8650-dp";
+ reg = <0 0xaf54000 0 0x104>,
+ <0 0xaf54200 0 0xc0>,
+ <0 0xaf55000 0 0x770>,
+ <0 0xaf56000 0 0x9c>,
+ <0 0xaf57000 0 0x9c>;
+
+ interrupts-extended = <&mdss 12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&dp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-162000000 {
+ opp-hz = /bits/ 64 <162000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ };
+ };
+ };
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8650-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <0>, /* dp1 */
+ <0>,
+ <0>, /* dp2 */
+ <0>,
+ <0>, /* dp3 */
+ <0>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8650-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e3000 0 0x154>;
+
+ clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@88e8000 {
+ compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x40 0>;
+
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
+ };
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8650-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+ interrupt-parent = <&intc>;
+
+ qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+ <125 63 1>, <126 716 12>,
+ <138 251 5>, <143 244 4>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c228000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c228000 0 0x1000>, /* TM */
+ <0 0x0c222000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <15>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c229000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c229000 0 0x1000>, /* TM */
+ <0 0x0c223000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@c22a000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c22a000 0 0x1000>, /* TM */
+ <0 0x0c224000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <13>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+
+ interrupt-parent = <&ipcc>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
+ spmi_bus: spmi@c400000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x0c400000 0 0x3000>,
+ <0 0x0c500000 0 0x4000000>,
+ <0 0x0c440000 0 0x80000>,
+ <0 0x0c4c0000 0 0x20000>,
+ <0 0x0c42d000 0 0x4000>;
+ reg-names = "core",
+ "chnls",
+ "obsrvr",
+ "intr",
+ "cnfg";
+
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "periph_irq";
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ qcom,bus-id = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8650-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 211>;
+
+ wakeup-parent = <&pdc>;
+
+ hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio64", "gpio65";
+ function = "i2chub0_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio66", "gpio67";
+ function = "i2chub0_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio68", "gpio69";
+ function = "i2chub0_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio70", "gpio71";
+ function = "i2chub0_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio72", "gpio73";
+ function = "i2chub0_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio74", "gpio75";
+ function = "i2chub0_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio76", "gpio77";
+ function = "i2chub0_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio78", "gpio79";
+ function = "i2chub0_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio206", "gpio207";
+ function = "i2chub0_se8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio80", "gpio81";
+ function = "i2chub0_se9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio95";
+ function = "pcie0_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio98";
+ function = "pcie1_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio32", "gpio33";
+ function = "qup1_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio36", "gpio37";
+ function = "qup1_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio40", "gpio41";
+ function = "qup1_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio60", "gpio61";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio0", "gpio1";
+ function = "qup2_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup2_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup2_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup2_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio16", "gpio17";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio24", "gpio25";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio35";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_cs: qup-spi1-cs-state {
+ pins = "gpio39";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio43";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio47";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio51";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio55";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio59";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio63";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio60", "gpio61", "gpio62";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio3";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_cs: qup-spi9-cs-state {
+ pins = "gpio7";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_cs: qup-spi10-cs-state {
+ pins = "gpio11";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_cs: qup-spi11-cs-state {
+ pins = "gpio15";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_cs: qup-spi12-cs-state {
+ pins = "gpio19";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_cs: qup-spi13-cs-state {
+ pins = "gpio23";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_cs: qup-spi14-cs-state {
+ pins = "gpio27";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio24", "gpio25", "gpio26";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_uart14_default: qup-uart14-default-state {
+ /* TX, RX */
+ pins = "gpio26", "gpio27";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio24", "gpio25";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart15_default: qup-uart15-default-state {
+ /* TX, RX */
+ pins = "gpio30", "gpio31";
+ function = "qup2_se7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+
+ dma-coherent;
+ };
+
+ intc: interrupt-controller@17100000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x17100000 0 0x10000>, /* GICD */
+ <0 0x17180000 0 0x200000>; /* GICR * 8 */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x40000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@17140000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17140000 0 0x20000>;
+
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ timer@17420000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x17420000 0 0x1000>;
+
+ ranges = <0 0 0 0x20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ frame@17421000 {
+ reg = <0x17421000 0x1000>,
+ <0x17422000 0x1000>;
+
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <0>;
+ };
+
+ frame@17423000 {
+ reg = <0x17423000 0x1000>;
+
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <1>;
+
+ status = "disabled";
+ };
+
+ frame@17425000 {
+ reg = <0x17425000 0x1000>;
+
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <2>;
+
+ status = "disabled";
+ };
+
+ frame@17427000 {
+ reg = <0x17427000 0x1000>;
+
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <3>;
+
+ status = "disabled";
+ };
+
+ frame@17429000 {
+ reg = <0x17429000 0x1000>;
+
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <4>;
+
+ status = "disabled";
+ };
+
+ frame@1742b000 {
+ reg = <0x1742b000 0x1000>;
+
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <5>;
+
+ status = "disabled";
+ };
+
+ frame@1742d000 {
+ reg = <0x1742d000 0x1000>;
+
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <6>;
+
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17a00000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0 0x17a00000 0 0x10000>,
+ <0 0x17a10000 0 0x10000>,
+ <0 0x17a20000 0 0x10000>,
+ <0 0x17a30000 0 0x10000>;
+ reg-names = "drv-0",
+ "drv-1",
+ "drv-2";
+
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&CLUSTER_PD>;
+
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm8650-rpmh-clk";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ #clock-cells = <1>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sm8650-rpmhpd";
+
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ #power-domain-cells = <1>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-16 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp-48 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_d2: opp-52 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+
+ rpmhpd_opp_low_svs_d1: opp-56 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ rpmhpd_opp_low_svs_d0: opp-60 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ rpmhpd_opp_low_svs: opp-64 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_l1: opp-80 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs: opp-128 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l0: opp-144 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-192 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp-256 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-320 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-336 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-384 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-416 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ cpufreq_hw: cpufreq@17d91000 {
+ compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x17d91000 0 0x1000>,
+ <0 0x17d92000 0 0x1000>,
+ <0 0x17d93000 0 0x1000>,
+ <0 0x17d94000 0 0x1000>;
+ reg-names = "freq-domain0",
+ "freq-domain1",
+ "freq-domain2",
+ "freq-domain3";
+
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dcvsh-irq-0",
+ "dcvsh-irq-1",
+ "dcvsh-irq-2",
+ "dcvsh-irq-3";
+
+ clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ #clock-cells = <1>;
+ };
+
+ pmu@24091000 {
+ compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+ reg = <0 0x24091000 0 0x1000>;
+
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+ llcc_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <2086000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <2929000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <5931000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <6515000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <7980000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <10437000>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <12157000>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <14060000>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <16113000>;
+ };
+ };
+ };
+
+ pmu@240b7400 {
+ compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0 0x240b7400 0 0x600>;
+
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <4577000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <7110000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <9155000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <12298000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <14236000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <16265000>;
+ };
+ };
+ };
+
+ gem_noc: interconnect@24100000 {
+ compatible = "qcom,sm8650-gem-noc";
+ reg = <0 0x24100000 0 0xc5080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system-cache-controller@25000000 {
+ compatible = "qcom,sm8650-llcc";
+ reg = <0 0x25000000 0 0x200000>,
+ <0 0x25400000 0 0x200000>,
+ <0 0x25200000 0 0x200000>,
+ <0 0x25600000 0 0x200000>,
+ <0 0x25800000 0 0x200000>;
+ reg-names = "llcc0_base",
+ "llcc1_base",
+ "llcc2_base",
+ "llcc3_base",
+ "llcc_broadcast_base";
+
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ compatible = "qcom,sm8650-adsp-pas";
+ reg = <0 0x30000000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <2>;
+
+ label = "lpass";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+ label = "adsp";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+
+ iommus = <&apps_smmu 0x1003 0x80>,
+ <&apps_smmu 0x1043 0x20>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+
+ iommus = <&apps_smmu 0x1004 0x80>,
+ <&apps_smmu 0x1044 0x20>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+
+ iommus = <&apps_smmu 0x1005 0x80>,
+ <&apps_smmu 0x1045 0x20>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+
+ iommus = <&apps_smmu 0x1006 0x80>,
+ <&apps_smmu 0x1046 0x20>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+
+ iommus = <&apps_smmu 0x1007 0x40>,
+ <&apps_smmu 0x1067 0x0>,
+ <&apps_smmu 0x1087 0x0>;
+ };
+ };
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1001 0x80>,
+ <&apps_smmu 0x1061 0x0>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
+ };
+ };
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,sm8650-nsp-noc";
+ reg = <0 0x320c0000 0 0xf080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ remoteproc_cdsp: remoteproc@32300000 {
+ compatible = "qcom,sm8650-cdsp-pas";
+ reg = <0 0x32300000 0 0x1400000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP>;
+ power-domain-names = "cx",
+ "mxc",
+ "nsp";
+
+ memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <5>;
+
+ label = "cdsp";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+ label = "cdsp";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+
+ iommus = <&apps_smmu 0x1961 0x0>,
+ <&apps_smmu 0x0c01 0x20>,
+ <&apps_smmu 0x19c1 0x0>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+
+ iommus = <&apps_smmu 0x1962 0x0>,
+ <&apps_smmu 0x0c02 0x20>,
+ <&apps_smmu 0x19c2 0x0>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+
+ iommus = <&apps_smmu 0x1963 0x0>,
+ <&apps_smmu 0x0c03 0x20>,
+ <&apps_smmu 0x19c3 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+
+ iommus = <&apps_smmu 0x1964 0x0>,
+ <&apps_smmu 0x0c04 0x20>,
+ <&apps_smmu 0x19c4 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+
+ iommus = <&apps_smmu 0x1965 0x0>,
+ <&apps_smmu 0x0c05 0x20>,
+ <&apps_smmu 0x19c5 0x0>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+
+ iommus = <&apps_smmu 0x1966 0x0>,
+ <&apps_smmu 0x0c06 0x20>,
+ <&apps_smmu 0x19c6 0x0>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+
+ iommus = <&apps_smmu 0x1967 0x0>,
+ <&apps_smmu 0x0c07 0x20>,
+ <&apps_smmu 0x19c7 0x0>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+
+ iommus = <&apps_smmu 0x1968 0x0>,
+ <&apps_smmu 0x0c08 0x20>,
+ <&apps_smmu 0x19c8 0x0>;
+ };
+ };
+ };
+ };
+ };
+
+ thermal-zones {
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss2-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpuss3-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-middle-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1-critical {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphvx1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphvx1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphmx0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphmx1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphmx2-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nsphmx3-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ video-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ ddr-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 15>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss2-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss2-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss3-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss3-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss4-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss4-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss5-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss5-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss6-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss6-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss7-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss7-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ modem0-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ modem1-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ modem2-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens2 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ modem3-critical {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+ compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+ compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vph_pwr>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vph_pwr>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <33 3>, /* Unused */
+ <44 4>, /* SPI (TPM) */
+ <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU4: cpu@10000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10000>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU5: cpu@10100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU6: cpu@10200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU7: cpu@10300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_1>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU8: cpu@20000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20000>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD8>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+
+ L2_2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ CPU9: cpu@20100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD9>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU10: cpu@20200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD10>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ CPU11: cpu@20300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_2>;
+ power-domains = <&CPU_PD11>;
+ power-domain-names = "psci";
+ cpu-idle-states = <&CLUSTER_C4>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+
+ core1 {
+ cpu = <&CPU9>;
+ };
+
+ core2 {
+ cpu = <&CPU10>;
+ };
+
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CLUSTER_C4: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "ret";
+ arm,psci-suspend-param = <0x00000004>;
+ entry-latency-us = <180>;
+ exit-latency-us = <320>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_CL4: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "l2-ret";
+ arm,psci-suspend-param = <0x01000044>;
+ entry-latency-us = <350>;
+ exit-latency-us = <500>;
+ min-residency-us = <2500>;
+ };
+
+ CLUSTER_CL5: cluster-sleep-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "ret-pll-off";
+ arm,psci-suspend-param = <0x01000054>;
+ entry-latency-us = <2200>;
+ exit-latency-us = <2500>;
+ min-residency-us = <7000>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-x1e80100", "qcom,scm";
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ };
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,x1e80100-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,x1e80100-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD0>;
+ };
+
+ CPU_PD4: power-domain-cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD1>;
+ };
+
+ CPU_PD5: power-domain-cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD1>;
+ };
+
+ CPU_PD6: power-domain-cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD1>;
+ };
+
+ CPU_PD7: power-domain-cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD1>;
+ };
+
+ CPU_PD8: power-domain-cpu8 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD2>;
+ };
+
+ CPU_PD9: power-domain-cpu9 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD2>;
+ };
+
+ CPU_PD10: power-domain-cpu10 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD2>;
+ };
+
+ CPU_PD11: power-domain-cpu11 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD2>;
+ };
+
+ CLUSTER_PD0: power-domain-cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+ };
+
+ CLUSTER_PD1: power-domain-cpu-cluster1 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+ };
+
+ CLUSTER_PD2: power-domain-cpu-cluster2 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gunyah_hyp_mem: gunyah-hyp@80000000 {
+ reg = <0x0 0x80000000 0x0 0x800000>;
+ no-map;
+ };
+
+ hyp_elf_package_mem: hyp-elf-package@80800000 {
+ reg = <0x0 0x80800000 0x0 0x200000>;
+ no-map;
+ };
+
+ ncc_mem: ncc@80a00000 {
+ reg = <0x0 0x80a00000 0x0 0x400000>;
+ no-map;
+ };
+
+ cpucp_log_mem: cpucp-log@80e00000 {
+ reg = <0x0 0x80e00000 0x0 0x40000>;
+ no-map;
+ };
+
+ cpucp_mem: cpucp@80e40000 {
+ reg = <0x0 0x80e40000 0x0 0x540000>;
+ no-map;
+ };
+
+ reserved-region@81380000 {
+ reg = <0x0 0x81380000 0x0 0x80000>;
+ no-map;
+ };
+
+ tags_mem: tags-region@81400000 {
+ reg = <0x0 0x81400000 0x0 0x1a0000>;
+ no-map;
+ };
+
+ xbl_dtlog_mem: xbl-dtlog@81a00000 {
+ reg = <0x0 0x81a00000 0x0 0x40000>;
+ no-map;
+ };
+
+ xbl_ramdump_mem: xbl-ramdump@81a40000 {
+ reg = <0x0 0x81a40000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ aop_image_mem: aop-image@81c00000 {
+ reg = <0x0 0x81c00000 0x0 0x60000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x81c60000 0x0 0x20000>;
+ no-map;
+ };
+
+ aop_config_mem: aop-config@81c80000 {
+ reg = <0x0 0x81c80000 0x0 0x20000>;
+ no-map;
+ };
+
+ tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+ reg = <0x0 0x81ca0000 0x0 0x40000>;
+ no-map;
+ };
+
+ tme_log_mem: tme-log@81ce0000 {
+ reg = <0x0 0x81ce0000 0x0 0x4000>;
+ no-map;
+ };
+
+ uefi_log_mem: uefi-log@81ce4000 {
+ reg = <0x0 0x81ce4000 0x0 0x10000>;
+ no-map;
+ };
+
+ secdata_apss_mem: secdata-apss@81cff000 {
+ reg = <0x0 0x81cff000 0x0 0x1000>;
+ no-map;
+ };
+
+ pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+ reg = <0x0 0x81e00000 0x0 0x100000>;
+ no-map;
+ };
+
+ gpu_prr_mem: gpu-prr@81f00000 {
+ reg = <0x0 0x81f00000 0x0 0x10000>;
+ no-map;
+ };
+
+ tpm_control_mem: tpm-control@81f10000 {
+ reg = <0x0 0x81f10000 0x0 0x10000>;
+ no-map;
+ };
+
+ usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+ reg = <0x0 0x81f20000 0x0 0x10000>;
+ no-map;
+ };
+
+ pld_pep_mem: pld-pep@81f30000 {
+ reg = <0x0 0x81f30000 0x0 0x6000>;
+ no-map;
+ };
+
+ pld_gmu_mem: pld-gmu@81f36000 {
+ reg = <0x0 0x81f36000 0x0 0x1000>;
+ no-map;
+ };
+
+ pld_pdp_mem: pld-pdp@81f37000 {
+ reg = <0x0 0x81f37000 0x0 0x1000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@82700000 {
+ reg = <0x0 0x82700000 0x0 0x100000>;
+ no-map;
+ };
+
+ xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+ reg = <0x0 0x82800000 0x0 0xc00000>;
+ no-map;
+ };
+
+ adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+ reg = <0x0 0x84b00000 0x0 0x800000>;
+ no-map;
+ };
+
+ spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+ reg = <0x0 0x85300000 0x0 0x80000>;
+ no-map;
+ };
+
+ adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+ reg = <0x0 0x866c0000 0x0 0x40000>;
+ no-map;
+ };
+
+ spss_region_mem: spss-region@86700000 {
+ reg = <0x0 0x86700000 0x0 0x400000>;
+ no-map;
+ };
+
+ adsp_boot_mem: adsp-boot@86b00000 {
+ reg = <0x0 0x86b00000 0x0 0xc00000>;
+ no-map;
+ };
+
+ video_mem: video@87700000 {
+ reg = <0x0 0x87700000 0x0 0x700000>;
+ no-map;
+ };
+
+ adspslpi_mem: adspslpi@87e00000 {
+ reg = <0x0 0x87e00000 0x0 0x3a00000>;
+ no-map;
+ };
+
+ q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0x80000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@8b900000 {
+ reg = <0x0 0x8b900000 0x0 0x2000000>;
+ no-map;
+ };
+
+ q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+ reg = <0x0 0x8d900000 0x0 0x80000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8d9fe000 {
+ reg = <0x0 0x8d9fe000 0x0 0x2000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8da00000 {
+ reg = <0x0 0x8da00000 0x0 0x700000>;
+ no-map;
+ };
+
+ camera_mem: camera@8e100000 {
+ reg = <0x0 0x8e100000 0x0 0x800000>;
+ no-map;
+ };
+
+ av1_encoder_mem: av1-encoder@8e900000 {
+ reg = <0x0 0x8e900000 0x0 0x700000>;
+ no-map;
+ };
+
+ reserved-region@8f000000 {
+ reg = <0x0 0x8f000000 0x0 0xa00000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@8fa00000 {
+ reg = <0x0 0x8fa00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+ reg = <0x0 0x91300000 0x0 0x80000>;
+ no-map;
+ };
+
+ xbl_sc_mem: xbl-sc@d8000000 {
+ reg = <0x0 0xd8000000 0x0 0x40000>;
+ no-map;
+ };
+
+ reserved-region@d8040000 {
+ reg = <0x0 0xd8040000 0x0 0xa0000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@d80e0000 {
+ reg = <0x0 0xd80e0000 0x0 0x520000>;
+ no-map;
+ };
+
+ ta_mem: ta@d8600000 {
+ reg = <0x0 0xd8600000 0x0 0x8a00000>;
+ no-map;
+ };
+
+ tags_mem1: tags@e1000000 {
+ reg = <0x0 0xe1000000 0x0 0x26a0000>;
+ no-map;
+ };
+
+ llcc_lpi_mem: llcc-lpi@ff800000 {
+ reg = <0x0 0xff800000 0x0 0x600000>;
+ no-map;
+ };
+
+ smem_mem: smem@ffe00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ hwlocks = <&tcsr_mutex 3>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ ranges = <0 0 0 0 0x10 0>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,x1e80100-gcc";
+ reg = <0 0x00100000 0 0x200000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+
+ interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x436 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x423 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c16: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c16_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi16: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c17: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c17_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi17: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c18: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c18_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi18: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c19: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c19_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi19: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c20: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c20_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi20: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c21: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c21_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi21: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart21: serial@894000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart21_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c22: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c22_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi22: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c23: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c23_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi23: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x136 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x123 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi13: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c14: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c14_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi14: spi@a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c15: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi15: spi@a9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma0: dma-controller@b00000 {
+ compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00b00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x456 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_0: geniqup@bc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00bc0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x443 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c0: i2c@b80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@b80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@b84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@b84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@b88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@b88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xb88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@b8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@b8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@b90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi4: spi@b90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@b94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@b94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@b98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@b98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@b9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi7: spi@b9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ cnoc_main: interconnect@1500000 {
+ compatible = "qcom,x1e80100-cnoc-main";
+ reg = <0 0x1500000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ config_noc: interconnect@1600000 {
+ compatible = "qcom,x1e80100-cnoc-cfg";
+ reg = <0 0x1600000 0 0x6600>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,x1e80100-system-noc";
+ reg = <0 0x1680000 0 0x1c080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_south_anoc: interconnect@16c0000 {
+ compatible = "qcom,x1e80100-pcie-south-anoc";
+ reg = <0 0x16c0000 0 0xd080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_center_anoc: interconnect@16d0000 {
+ compatible = "qcom,x1e80100-pcie-center-anoc";
+ reg = <0 0x16d0000 0 0x7000>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,x1e80100-aggre1-noc";
+ reg = <0 0x16E0000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,x1e80100-aggre2-noc";
+ reg = <0 0x1700000 0 0x1c400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_north_anoc: interconnect@1740000 {
+ compatible = "qcom,x1e80100-pcie-north-anoc";
+ reg = <0 0x1740000 0 0x9080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_center_anoc: interconnect@1750000 {
+ compatible = "qcom,x1e80100-usb-center-anoc";
+ reg = <0 0x1750000 0 0x8800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_north_anoc: interconnect@1760000 {
+ compatible = "qcom,x1e80100-usb-north-anoc";
+ reg = <0 0x1760000 0 0x7080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_south_anoc: interconnect@1770000 {
+ compatible = "qcom,x1e80100-usb-south-anoc";
+ reg = <0 0x1770000 0 0xf080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ mmss_noc: interconnect@1780000 {
+ compatible = "qcom,x1e80100-mmss-noc";
+ reg = <0 0x1780000 0 0x5B800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0 0x01f40000 0 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ gem_noc: interconnect@26400000 {
+ compatible = "qcom,x1e80100-gem-noc";
+ reg = <0 0x26400000 0 0x311200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,x1e80100-nsp-noc";
+ reg = <0 0x320C0000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_ag_noc: interconnect@7e40000 {
+ compatible = "qcom,x1e80100-lpass-ag-noc";
+ reg = <0 0x7e40000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpiaon_noc: interconnect@7400000 {
+ compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+ reg = <0 0x7400000 0 0x19080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpicx_noc: interconnect@7430000 {
+ compatible = "qcom,x1e80100-lpass-lpicx-noc";
+ reg = <0 0x7430000 0 0x3A200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+ qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+ <47 522 52>, <99 609 32>,
+ <131 717 12>, <143 816 19>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,x1e80100-tlmm";
+ reg = <0 0x0f100000 0 0xf00000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 239>;
+ wakeup-parent = <&pdc>;
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio0", "gpio1";
+ function = "qup0_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup0_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup0_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio16", "gpio17";
+ function = "qup0_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio24", "gpio25";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio14", "gpio15";
+ function = "qup0_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio32", "gpio33";
+ function = "qup1_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio36", "gpio37";
+ function = "qup1_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio40", "gpio41";
+ function = "qup1_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio54", "gpio55";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio64", "gpio65";
+ function = "qup2_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio68", "gpio69";
+ function = "qup2_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio72", "gpio73";
+ function = "qup2_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio76", "gpio77";
+ function = "qup2_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio80", "gpio81";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio84", "gpio85";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio88", "gpio89";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio3";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_cs: qup-spi1-cs-state {
+ pins = "gpio7";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio11";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio15";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio19";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio23";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio27";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio24", "gpio25", "gpio26";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio13";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio14", "gpio15", "gpio12";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio35";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_cs: qup-spi9-cs-state {
+ pins = "gpio39";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_cs: qup-spi10-cs-state {
+ pins = "gpio43";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_cs: qup-spi11-cs-state {
+ pins = "gpio47";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_cs: qup-spi12-cs-state {
+ pins = "gpio51";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_cs: qup-spi13-cs-state {
+ pins = "gpio55";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_cs: qup-spi14-cs-state {
+ pins = "gpio59";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_cs: qup-spi15-cs-state {
+ pins = "gpio53";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_data_clk: qup-spi15-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio54", "gpio55", "gpio52";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_cs: qup-spi16-cs-state {
+ pins = "gpio67";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_data_clk: qup-spi16-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio64", "gpio65", "gpio66";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_cs: qup-spi17-cs-state {
+ pins = "gpio71";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_data_clk: qup-spi17-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio68", "gpio69", "gpio70";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_cs: qup-spi18-cs-state {
+ pins = "gpio75";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_data_clk: qup-spi18-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio72", "gpio73", "gpio74";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_cs: qup-spi19-cs-state {
+ pins = "gpio79";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_data_clk: qup-spi19-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio76", "gpio77", "gpio78";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_cs: qup-spi20-cs-state {
+ pins = "gpio83";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_data_clk: qup-spi20-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio80", "gpio81", "gpio82";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_cs: qup-spi21-cs-state {
+ pins = "gpio87";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_data_clk: qup-spi21-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio84", "gpio85", "gpio86";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_cs: qup-spi22-cs-state {
+ pins = "gpio91";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_data_clk: qup-spi22-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio88", "gpio89", "gpio90";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_cs: qup-spi23-cs-state {
+ pins = "gpio85";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_data_clk: qup-spi23-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio86", "gpio87", "gpio84";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_uart21_default: qup-uart21-default-state {
+ /* TX, RX */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se5";
+ drive-strength= <2>;
+ bias-disable;
+ };
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ };
+
+ intc: interrupt-controller@17000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x17000000 0 0x10000>, /* GICD */
+ <0 0x17080000 0 0x480000>; /* GICR * 12 */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@17040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17040000 0 0x40000>;
+
+ msi-controller;
+ #msi-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17500000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0 0x17500000 0 0x10000>,
+ <0 0x17510000 0 0x10000>,
+ <0 0x17520000 0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ qcom,drv-count = <3>;
+
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,x1e80100-rpmh-clk";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ #clock-cells = <1>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,x1e80100-rpmhpd";
+
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ #power-domain-cells = <1>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-16 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp-48 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_d2: opp-52 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+
+ rpmhpd_opp_low_svs_d1: opp-56 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ rpmhpd_opp_low_svs_d0: opp-60 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ rpmhpd_opp_low_svs: opp-64 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_l1: opp-80 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs: opp-128 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l0: opp-144 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-192 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp-256 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-320 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-336 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-384 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-416 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ timer@17800000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x17800000 0 0x1000>;
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
+
+ frame@17801000 {
+ reg = <0 0x17801000 0x1000>,
+ <0 0x17802000 0x1000>;
+
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <0>;
+ };
+
+ frame@17803000 {
+ reg = <0 0x17803000 0x1000>;
+
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <1>;
+
+ status = "disabled";
+ };
+
+ frame@17805000 {
+ reg = <0 0x17805000 0x1000>;
+
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <2>;
+
+ status = "disabled";
+ };
+
+ frame@17807000 {
+ reg = <0 0x17807000 0x1000>;
+
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <3>;
+
+ status = "disabled";
+ };
+
+ frame@17809000 {
+ reg = <0 0x17809000 0x1000>;
+
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <4>;
+
+ status = "disabled";
+ };
+
+ frame@1780b000 {
+ reg = <0 0x1780b000 0x1000>;
+
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <5>;
+
+ status = "disabled";
+ };
+
+ frame@1780d000 {
+ reg = <0 0x1780d000 0x1000>;
+
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <6>;
+
+ status = "disabled";
+ };
+ };
+
+ system-cache-controller@25000000 {
+ compatible = "qcom,x1e80100-llcc";
+ reg = <0 0x25000000 0 0x200000>,
+ <0 0x25200000 0 0x200000>,
+ <0 0x25400000 0 0x200000>,
+ <0 0x25600000 0 0x200000>,
+ <0 0x25800000 0 0x200000>,
+ <0 0x25a00000 0 0x200000>,
+ <0 0x25c00000 0 0x200000>,
+ <0 0x25e00000 0 0x200000>,
+ <0 0x26000000 0 0x200000>;
+ reg-names = "llcc0_base",
+ "llcc1_base",
+ "llcc2_base",
+ "llcc3_base",
+ "llcc4_base",
+ "llcc5_base",
+ "llcc6_base",
+ "llcc7_base",
+ "llcc_broadcast_base";
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, link it to
- * VIN4 here.
+ * HDMI is the default selection, leave CVBS
+ * not connected here.
*/
- adv7180_out: endpoint {
- remote-endpoint = <&vin4_in>;
- };
};
};
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, leave HDMI
- * not connected here.
+ * HDMI is the default selection, link it to
+ * VIN4 here.
*/
adv7612_out: endpoint {
- pclk-sample = <0>;
- hsync-active = <0>;
- vsync-active = <0>;
+ remote-endpoint = <&vin4_in>;
};
};
};
function = "usb0";
};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ vin4_pins: vin4 {
+ groups = "vin4_data24", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
};
&vin4 {
- pinctrl-0 = <&vin4_pins_cvbs>;
+ pinctrl-0 = <&vin4_pins>;
pinctrl-names = "default";
status = "okay";
ports {
port {
vin4_in: endpoint {
- remote-endpoint = <&adv7180_out>;
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ remote-endpoint = <&adv7612_out>;
};
};
};
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ dvdd-3v-supply = <®_3p3v>;
+ bgvdd-supply = <®_1p8v>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
stdout-path = "serial0:115200n8";
};
+ d1p8: regulator-fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
d3p3: regulator-fixed {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
interrupt-parent = <&gpio1>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1p8>;
+ dvdd-supply = <&d1p8>;
+ pvdd-supply = <&d1p8>;
+ dvdd-3v-supply = <&d3p3>;
+ bgvdd-supply = <&d1p8>;
+
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
};
&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ interrupt-parent = <&irqc>;
gpio-ranges = <&pinctrl 0 0 152>;
clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>;
power-domains = <&cpg>;
<&cpg R9A08G045_GPIO_SPARE_RESETN>;
};
+ irqc: interrupt-controller@11050000 {
+ compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x11050000 0 0x10000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "nmi",
+ "irq0", "irq1", "irq2", "irq3",
+ "irq4", "irq5", "irq6", "irq7",
+ "tint0", "tint1", "tint2", "tint3",
+ "tint4", "tint5", "tint6", "tint7",
+ "tint8", "tint9", "tint10", "tint11",
+ "tint12", "tint13", "tint14", "tint15",
+ "tint16", "tint17", "tint18", "tint19",
+ "tint20", "tint21", "tint22", "tint23",
+ "tint24", "tint25", "tint26", "tint27",
+ "tint28", "tint29", "tint30", "tint31",
+ "bus-err";
+ clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
+ <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A08G045_IA55_RESETN>;
+ };
+
sdhi0: mmc@11c00000 {
compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
reg = <0x0 0x11c00000 0 0x10000>;
status = "disabled";
};
+ eth0: ethernet@11c30000 {
+ compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+ reg = <0 0x11c30000 0 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ eth1: ethernet@11c40000 {
+ compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+ reg = <0 0x11c40000 0 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@12400000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
};
avb: ethernet@a3300000 {
- compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+ compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m";
reg = <0 0xa3300000 0 0x800>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
m25p,fast-read;
spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
m25p,fast-read;
spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
/*
- * Signals of SW_CONFIG switches:
- * @SW_SD0_DEV_SEL:
- * 0 - SD0 is connected to eMMC
- * 1 - SD0 is connected to uSD0 card
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON: switch's state is ON
*/
-#define SW_SD0_DEV_SEL 1
+#define SW_OFF 0
+#define SW_ON 1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ * SW_OFF - SD0 is connected to eMMC
+ * SW_ON - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ * SW_OFF - SD2 is connected to SoC
+ * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2 SW_ON
+#define SW_CONFIG3 SW_ON
/ {
compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
aliases {
mmc0 = &sdhi0;
+#if SW_CONFIG3 == SW_OFF
+ mmc2 = &sdhi2;
+#else
+ eth0 = ð0;
+ eth1 = ð1;
+#endif
};
chosen {
enable-active-high;
};
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
vccq_sdhi0: regulator1 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-always-on;
};
#endif
+
+ vcc_sdhi2: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+#if SW_CONFIG3 == SW_ON
+ð0 {
+ pinctrl-0 = <ð0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy0: ethernet-phy@7 {
+ reg = <7>;
+ interrupt-parent = <&pinctrl>;
+ interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txen-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+ð1 {
+ pinctrl-0 = <ð1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy1: ethernet-phy@7 {
+ reg = <7>;
+ interrupt-parent = <&pinctrl>;
+ interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txen-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
};
+#endif
&extal_clk {
clock-frequency = <24000000>;
};
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
/* SD0 slot */
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
};
#endif
+#if SW_CONFIG3 == SW_OFF
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_sdhi2>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ status = "okay";
+};
+#endif
+
&pinctrl {
+ eth0-phy-irq-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "eth0-phy-irq";
+ };
+
+ eth0_pins: eth0 {
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */
+ power-source = <1800>;
+ output-enable;
+ input-enable;
+ drive-strength-microamp = <5200>;
+ };
+
+ tx_ctl {
+ pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* ET0_TX_CTL */
+ power-source = <1800>;
+ output-enable;
+ drive-strength-microamp = <5200>;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(4, 5, 1)>; /* ET0_LINKSTA */
+ power-source = <1800>;
+ };
+ };
+
+ eth1-phy-irq-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "eth1-phy-irq";
+ };
+
+ eth1_pins: eth1 {
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */
+ power-source = <1800>;
+ output-enable;
+ input-enable;
+ drive-strength-microamp = <5200>;
+ };
+
+ tx_ctl {
+ pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>; /* ET1_TX_CTL */
+ power-source = <1800>;
+ output-enable;
+ drive-strength-microamp = <5200>;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(10, 4, 1)>; /* ET1_LINKSTA */
+ power-source = <1800>;
+ };
+ };
+
sdhi0_pins: sd0 {
data {
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
"SD0_CLK", "SD0_CMD", "SD0_RST#";
power-source = <1800>;
};
+
+ sdhi2_pins: sd2 {
+ data {
+ pins = "P11_2", "P11_3", "P12_0", "P12_1";
+ input-enable;
+ };
+
+ ctrl {
+ pins = "P11_1";
+ input-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */
+ <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */
+ <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */
+ <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */
+ <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */
+ <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */
+ <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */
+ };
+ };
};
/ {
aliases {
serial0 = &scif0;
+ mmc1 = &sdhi1;
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
};
};
pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
<RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
};
+
+ sdhi1_pins: sd1 {
+ data {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <3300>;
+ };
+
+ ctrl {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <3300>;
+ };
+
+ cd {
+ pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+ };
+ };
+
+ sdhi1_pins_uhs: sd1-uhs {
+ data {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <1800>;
+ };
+
+ ctrl {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <1800>;
+ };
+
+ cd {
+ pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+ };
+ };
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
status = "okay";
};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <125000000>;
+ status = "okay";
+};
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
};
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
};
/ {
aliases {
+ ethernet0 = &gmac;
mmc1 = &sdmmc;
mmc2 = &sdio;
};
compatible = "rockchip,px30-evb", "rockchip,px30";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;
compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
aliases {
+ ethernet0 = &gmac;
mmc2 = &sdmmc;
};
#size-cells = <2>;
aliases {
- ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 12>, <&dmac 13>;
dma-names = "tx", "rx";
+ num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
#address-cells = <1>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 14>, <&dmac 15>;
dma-names = "tx", "rx";
+ num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
#address-cells = <1>;
status = "okay";
};
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "header1-pin3 [GPIO0_B3]",
+ "header1-pin5 [GPIO0_B4]", "", "",
+ "header1-pin11 [GPIO0_B7]",
+ /* GPIO0_C0 - C7 */
+ "header1-pin13 [GPIO0_C0]",
+ "header1-pin15 [GPIO0_C1]", "", "", "",
+ "", "", "",
+ /* GPIO0_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+ "header1-pin19 [GPIO1_C7]",
+ /* GPIO1_D0 - D7 */
+ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+ "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+ "", "",
+ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+ /* GPIO2_B0 - B7 */
+ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_B0 - B7 */
+ "", "", "header2-pin42 [GPIO3_B2]",
+ "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+ "header2-pin39 [GPIO3_B5]", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
status = "okay";
};
#size-cells = <2>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
aliases {
+ ethernet0 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;
*/
/dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
/ {
model = "Anbernic RG351M";
compatible = "anbernic,rg351m", "rockchip,rk3326";
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm0 0 1000000 0>;
- pwm-names = "enable";
- };
};
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
&internal_display {
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
+ rotation = <270>;
vdd-supply = <&vcc_lcd>;
};
-
-&pwm0 {
- status = "okay";
-};
-
-/delete-node/ &rk817_charger;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ /*
+ * LED is a tri-state. Driven high it is red, driven low it is
+ * green, and not driven at all (pin set to input) it is amber.
+ * Additionally, there is a 2nd LED that is not controllable
+ * that is on (red) when plugged in to power.
+ */
+ gpio_led: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin>;
+
+ red_green_led: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_CHARGING;
+ };
+ };
+
+ rk817-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rk817_int";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v8_sys";
+ regulator-always-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm0 0 1000000 0>;
+ pwm-names = "enable";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+ assigned-clocks = <&cru PLL_NPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+ assigned-clock-rates = <1188000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ internal_display: panel@0 {
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <16>;
+ i2c-scl-rising-time-ns = <280>;
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ clock-names = "mclk";
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ wakeup-source;
+
+ vcc1-supply = <&vccsys>;
+ vcc2-supply = <&vccsys>;
+ vcc3-supply = <&vccsys>;
+ vcc4-supply = <&vccsys>;
+ vcc5-supply = <&vccsys>;
+ vcc6-supply = <&vccsys>;
+ vcc7-supply = <&vccsys>;
+ vcc8-supply = <&vccsys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_logic";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <950000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-name = "vdd_1v0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vccio_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_sd";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_bl: LDO_REG7 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_bl";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG8 {
+ regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-name = "vcc_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ vcc_wifi: LDO_REG9 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ usb_midu: BOOST {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5400000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_midu";
+ };
+ };
+
+ rk817_codec: codec {
+ rockchip,mic-in-differential;
+ };
+ };
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sfc {
+ #address-cells = <1>;
+ pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+ pinctrl-names = "default";
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "disabled";
+ };
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ led_pin: led-pin {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dc_det: dc-det {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+ model = "Anbernic RG351V";
+ compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+ gpio_keys_vol: gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-vol-down {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-vol-up {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
+
+&internal_display {
+ compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+ vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+ vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+ regulator-max-microvolt = <1800000>;
+};
compatible = "azw,beelink-a1", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ motorcomm,auto-sleep-disabled;
motorcomm,clk-out-frequency-hz = <125000000>;
motorcomm,keep-pll-enabled;
- motorcomm,auto-sleep-disabled;
+ motorcomm,rx-clk-drv-microamp = <5020>;
+ motorcomm,rx-data-drv-microamp = <5020>;
pinctrl-0 = <ð_phy_reset_pin>;
pinctrl-names = "default";
compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};
compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
compatible = "radxa,rockpi-e", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
+ ethernet1 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
status = "okay";
};
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_D0 - D7 */
+ "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_D0 - D7 */
+ "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+ "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+ "pin-33 [GPIO2_A6]", "",
+ /* GPIO2_B0 - B7 */
+ "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+ "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+ "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+ "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+ /* GPIO3_B0 - B7 */
+ "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
status = "okay";
compatible = "pine64,rock64", "rockchip,rk3328";
aliases {
+ ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
#size-cells = <2>;
aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
- ethernet0 = &gmac2io;
- ethernet1 = &gmac2phy;
};
cpus {
pwm3: pwm@ff1b0030 {
compatible = "rockchip,rk3328-pwm";
reg = <0x0 0xff1b0030 0x0 0x10>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
resets = <&cru SRST_GMAC2IO_A>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
status = "disabled";
};
reset-names = "stmmaceth";
phy-mode = "rmii";
phy-handle = <&phy>;
+ tx-fifo-depth = <2048>;
+ rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
clock_in_out = "output";
status = "disabled";
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &emmc;
};
compatible = "geekbuying,geekbox", "rockchip,rk3368";
aliases {
+ ethernet0 = &gmac;
mmc0 = &emmc;
};
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &emmc;
};
compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &emmc;
};
compatible = "rockchip,r88", "rockchip,rk3368";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &emmc;
};
#size-cells = <2>;
aliases {
- ethernet0 = &gmac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
compatible = "openailab,eaidk-610", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdhci;
};
model = "96boards RK3399 Ficus";
compatible = "vamrs,ficus", "rockchip,rk3399";
+ aliases {
+ ethernet0 = &gmac;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
&spi0 {
status = "okay";
- cr50@0 {
+ tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupt-parent = <&gpio0>;
&spi2 {
status = "okay";
- cr50@0 {
+ tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupt-parent = <&gpio1>;
compatible = "hugsun,x99", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
/ {
model = "Khadas Edge-Captain";
compatible = "khadas,edge-captain", "rockchip,rk3399";
+
+ aliases {
+ ethernet0 = &gmac;
+ };
};
&gmac {
/ {
model = "Khadas Edge-V";
compatible = "khadas,edge-v", "rockchip,rk3399";
+
+ aliases {
+ ethernet0 = &gmac;
+ };
};
&gmac {
compatible = "kobol,helios64", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
spi1 = &spi1;
compatible = "leez,p710", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
/dts-v1/;
#include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "Theobroma Systems RK3399-Q7 SoM";
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&haikou_keys_pin>;
+ pinctrl-names = "default";
+
+ button-batlow-n {
+ gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "BATLOW#";
+ linux,code = <KEY_BATTERY>;
+ };
+
+ button-slp-btn-n {
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "SLP_BTN#";
+ linux,code = <KEY_SLEEP>;
+ };
+
+ button-wake-n {
+ gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "WAKE#";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+
+ switch-lid-btn-n {
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "LID_BTN#";
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
leds {
pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
};
&pinctrl {
- pinctrl-names = "default";
- pinctrl-0 = <&haikou_pin_hog>;
-
- hog {
- haikou_pin_hog: haikou-pin-hog {
+ buttons {
+ haikou_keys_pin: haikou-keys-pin {
rockchip,pins =
/* LID_BTN */
<0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BIOS_DISABLE# */
+ /* WAKE# */
<0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdhci;
};
drive-impedance-ohm = <33>;
};
+&gpio0 {
+ /*
+ * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+ * signal. This usually represents the state of a switch on the baseboard.
+ * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+ */
+ bios-disable-hog {
+ gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ input;
+ line-name = "bios_disable";
+ };
+};
+
&gmac {
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
};
compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
};
fan0: gpio-fan {
#cooling-cells = <2>;
compatible = "gpio-fan";
- gpio-fan,speed-map = <0 0 3000 1>;
+ gpio-fan,speed-map = <0 0>, <3000 1>;
gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
#size-cells = <2>;
aliases {
- ethernet0 = &gmac;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
#cooling-cells = <2>;
+ dynamic-power-coefficient = <2640>;
power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
};
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};
&pinctrl {
leds {
sys_led_pin: sys-status-led-pin {
- rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rg353x.dtsi"
+#include "rk3566-powkiddy-rk2023.dtsi"
/ {
model = "RGB30";
compatible = "powkiddy,rgb30", "rockchip,rk3566";
-
- aliases {
- mmc1 = &sdmmc0;
- mmc2 = &sdmmc1;
- mmc3 = &sdmmc2;
- };
-
- battery: battery {
- compatible = "simple-battery";
- charge-full-design-microamp-hours = <3151000>;
- charge-term-current-microamp = <300000>;
- constant-charge-current-max-microamp = <2000000>;
- constant-charge-voltage-max-microvolt = <4250000>;
- factory-internal-resistance-micro-ohms = <117000>;
- voltage-max-design-microvolt = <4172000>;
- voltage-min-design-microvolt = <3400000>;
-
- ocv-capacity-celsius = <20>;
- ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
- <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
- <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
- <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
- <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
- <3400000 0>;
- };
-
- /*
- * Channels reversed for speakers. Headphones automatically switch via hardware when
- * detected with no ability to control output in software. Headphones appear to be mono
- * (each output channel receives all audio). No microphone support on 3.5mm jack.
- */
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "rk817_ext";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Headphone", "Headphones";
- simple-audio-card,routing =
- "Headphones", "HPOL",
- "Headphones", "HPOR";
-
- simple-audio-card,codec {
- sound-dai = <&rk817>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_8ch>;
- };
- };
-};
-
-/delete-node/ &adc_keys;
-
-&chosen {
- /delete-property/ stdout-path;
};
&cru {
<200000000>, <292500000>;
};
-&gpio_keys_control {
- button-r1 {
- gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
- label = "TR";
- linux,code = <BTN_TR>;
- };
-
- button-r2 {
- gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
- label = "TR2";
- linux,code = <BTN_TR2>;
- };
-};
-
-/delete-node/ &{/i2c@fdd40000/regulator@40};
-
-&i2c0 {
- vdd_cpu: regulator@1c {
- compatible = "tcs,tcs4525";
- reg = <0x1c>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1390000>;
- regulator-name = "vdd_cpu";
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
+&dsi0 {
+ panel: panel@0 {
+ compatible = "powkiddy,rgb30-panel";
+ reg = <0>;
+ backlight = <&backlight>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vcc3v3_lcd0_n>;
+ iovcc-supply = <&vcc3v3_lcd0_n>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
};
};
};
-
-/*
- * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
- * red_led0 and red_led1.
- */
-/delete-node/ &{/pwm-leds/led-1};
-/delete-node/ &{/pwm-leds/led-2};
-
-&leds {
- red_led0: led-1 {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_CHARGING;
- max-brightness = <255>;
- pwms = <&pwm7 0 25000 0>;
- };
-
- red_led1: led-2 {
- color = <LED_COLOR_ID_RED>;
- default-state = "off";
- function = LED_FUNCTION_STATUS;
- max-brightness = <255>;
- pwms = <&pwm0 0 25000 0>;
- };
-};
-
-&panel {
- compatible = "powkiddy,rgb30-panel";
- vcc-supply = <&vcc3v3_lcd0_n>;
- iovcc-supply = <&vcc3v3_lcd0_n>;
- /delete-property/ vdd-supply;
-};
-
-&pwm5 {
- status = "disabled";
-};
-
-&rk817 {
- rk817_charger: charger {
- monitored-battery = <&battery>;
- rockchip,resistor-sense-micro-ohms = <10000>;
- rockchip,sleep-enter-current-microamp = <300000>;
- rockchip,sleep-filter-current-microamp = <100000>;
- };
-};
-
-/* There is no UART header visible on the board for this device. */
-&uart2 {
- status = "disabled";
-};
-
-/delete-node/ &vibrator;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+ model = "RK2023";
+ compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+ assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+ <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <32768>, <1200000000>,
+ <200000000>, <115200000>;
+};
+
+&dsi0 {
+ panel: panel@0 {
+ compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+ reg = <0>;
+ backlight = <&backlight>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc3v3_lcd0_n>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ aliases {
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
+ mmc3 = &sdmmc2;
+ };
+
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_en>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "right_x", "left_y", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&saradc 3>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_sys>;
+ pwms = <&pwm4 0 25000 0>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3151000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4250000>;
+ factory-internal-resistance-micro-ohms = <117000>;
+ voltage-max-design-microvolt = <4172000>;
+ voltage-min-design-microvolt = <3400000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+ <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+ <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+ <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+ <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+ <3400000 0>;
+ };
+
+ gpio_keys_control: gpio-keys-control {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&btn_pins_ctrl>;
+ pinctrl-names = "default";
+
+ button-a {
+ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+ label = "EAST";
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+ label = "SOUTH";
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-l1 {
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "TL";
+ linux,code = <BTN_TL>;
+ };
+
+ button-l2 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "TL2";
+ linux,code = <BTN_TL2>;
+ };
+
+ button-left {
+ gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-r1 {
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "TR";
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "TR2";
+ linux,code = <BTN_TR2>;
+ };
+
+ button-right {
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+
+ button-start {
+ gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+
+ button-thumbl {
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
+ button-up {
+ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ label = "NORTH";
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+ label = "WEST";
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio_keys_vol: gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-0 = <&btn_pins_vol>;
+ pinctrl-names = "default";
+
+ button-vol-down {
+ gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-vol-up {
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+ <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ #mux-control-cells = <0>;
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ ddc-i2c-bus = <&i2c5>;
+ type = "c";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ /*
+ * Device also includes an always on LED that is wired to the 5V input
+ * voltage and is on when the device is plugged in.
+ */
+ leds: pwm-leds {
+ compatible = "pwm-leds";
+
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ max-brightness = <255>;
+ pwms = <&pwm6 0 25000 0>;
+ };
+
+ red_led: led-1 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_CHARGING;
+ max-brightness = <255>;
+ pwms = <&pwm7 0 25000 0>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk817 1>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+
+ /*
+ * Channels reversed for speakers. Headphones automatically switch via hardware when
+ * detected with no ability to control output in software. Headphones appear to be mono
+ * (each output channel receives all audio). No microphone support on 3.5mm jack.
+ */
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rk817_ext";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+ };
+
+ vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-0 = <&vcc_lcd_h>;
+ pinctrl-names = "default";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_lcd0_n";
+ vin-supply = <&vcc_3v3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_sys: regulator-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-name = "vcc_sys";
+ };
+
+ vcc_wifi: regulator-vcc-wifi {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc_wifi_h>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ dsi0_in: port@0 {
+ reg = <0>;
+ dsi0_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_dsi0>;
+ };
+ };
+
+ dsi0_out: port@1 {
+ reg = <1>;
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy0 {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-0 = <&hdmitxm0_cec>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ clock-names = "mclk";
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&dcdc_boost>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_logic";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_3v3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda0v9_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_acodec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc1v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc2v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ dcdc_boost: BOOST {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4700000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-name = "boost";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ otg_switch: OTG_SWITCH {
+ regulator-name = "otg_switch";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ rk817_charger: charger {
+ monitored-battery = <&battery>;
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <300000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+ };
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-name = "vdd_cpu";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c5 {
+ pinctrl-0 = <&i2c5m1_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-0 = <&i2s1m0_sclktx
+ &i2s1m0_lrcktx
+ &i2s1m0_sdi0
+ &i2s1m0_sdo0>;
+ pinctrl-names = "default";
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&pinctrl {
+ gpio-btns {
+ btn_pins_ctrl: btn-pins-ctrl {
+ rockchip,pins =
+ <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ btn_pins_vol: btn-pins-vol {
+ rockchip,pins =
+ <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ joy-mux {
+ joy_mux_en: joy-mux-en {
+ rockchip,pins =
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+
+ gpio-lcd {
+ lcd_rst: lcd-rst {
+ rockchip,pins =
+ <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ vcc3v3-lcd {
+ vcc_lcd_h: vcc-lcd-h {
+ rockchip,pins =
+ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ vcc-wifi {
+ vcc_wifi_h: vcc-wifi-h {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc1v8_dvp>;
+ vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc1v8_dvp>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_wifi>;
+ vqmmc-supply = <&vcca1v8_pmu>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ phys = <&usb2phy0_otg>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
+
+&vp1 {
+ vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp1>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Powkiddy x55";
+ compatible = "powkiddy,x55", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc2;
+ mmc3 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc_joystick: adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&saradc 0>, <&saradc 1>,
+ <&saradc 2>, <&saradc 3>;
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <30>;
+ abs-fuzz = <20>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <30>;
+ abs-fuzz = <20>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <30>;
+ abs-fuzz = <20>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <30>;
+ abs-fuzz = <20>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_sys>;
+ pwms = <&pwm4 0 25000 0>;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <4000000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4300000>;
+ factory-internal-resistance-micro-ohms = <91000>;
+ voltage-max-design-microvolt = <4138000>;
+ voltage-min-design-microvolt = <3400000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+ <4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+ <3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+ <3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+ <3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+ <3400000 0>;
+ };
+
+ gpio_keys_control: gpio-keys-control {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&btn_pins_ctrl>;
+ pinctrl-names = "default";
+
+ button-a {
+ gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+ label = "EAST";
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+ label = "SOUTH";
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-l1 {
+ gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+ label = "TL";
+ linux,code = <BTN_TL>;
+ };
+
+ button-l2 {
+ gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+ label = "TL2";
+ linux,code = <BTN_TL2>;
+ };
+
+ button-left {
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+ label = "DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-right {
+ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+ label = "DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "SELECT";
+ linux,code = <BTN_SELECT>;
+ };
+
+ button-start {
+ gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "START";
+ linux,code = <BTN_START>;
+ };
+
+ button-thumbl {
+ gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
+ button-r1 {
+ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+ label = "TR";
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+ label = "TR2";
+ linux,code = <BTN_TR2>;
+ };
+
+ button-up {
+ gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "DPAD-UP";
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+ label = "NORTH";
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+ label = "WEST";
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio_keys_vol: gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-0 = <&btn_pins_vol>;
+ pinctrl-names = "default";
+
+ button-voldown {
+ gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-volup {
+ gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ gpio_leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ red_led: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ green_led: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ amber_led: led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_CHARGING;
+ };
+
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ ddc-i2c-bus = <&i2c5>;
+ type = "c";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk817 1>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Channels reversed for both headphones and speakers. */
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-0 = <&hp_det>;
+ pinctrl-names = "default";
+ simple-audio-card,name = "rk817_ext";
+ simple-audio-card,aux-devs = <&spk_amp>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Internal Speakers";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Internal Speakers", "Speaker Amp OUTL",
+ "Internal Speakers", "Speaker Amp OUTR",
+ "Speaker Amp INL", "HPOL",
+ "Speaker Amp INR", "HPOR";
+ simple-audio-card,pin-switches = "Internal Speakers";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+ };
+
+ spk_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&spk_amp_enable_h>;
+ pinctrl-names = "default";
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc5v0_host_en>;
+ pinctrl-names = "default";
+ regulator-name = "vcc5v0_host";
+ vin-supply = <&dcdc_boost>;
+ };
+
+ vcc_lcd: regulator-vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&vcc_lcd_en>;
+ pinctrl-names = "default";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_lcd";
+ };
+
+ vcc_sys: regulator-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-name = "vcc_sys";
+ };
+
+ vcc_wifi: regulator-vcc-wifi {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&vcc_wifi_h>;
+ pinctrl-names = "default";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cru {
+ assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+ <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <32768>, <1200000000>,
+ <200000000>, <126400000>;
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+ status = "okay";
+};
+
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ dsi0_in: port@0 {
+ reg = <0>;
+ dsi0_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_dsi0>;
+ };
+ };
+
+ dsi0_out: port@1 {
+ reg = <1>;
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ compatible = "powkiddy,x55-panel", "himax,hx8394";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_lcd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
+ vcc-supply = <&vcc_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-0 = <&hdmitxm0_cec>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ clock-names = "mclk";
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+ wakeup-source;
+ #clock-cells = <1>;
+ #sound-dai-cells = <0>;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&dcdc_boost>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_logic";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_3v3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda0v9_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_acodec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_dvp";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc2v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ dcdc_boost: BOOST {
+ regulator-min-microvolt = <4700000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-name = "boost";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ otg_switch: OTG_SWITCH {
+ regulator-name = "otg_switch";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ rk817_charger: charger {
+ monitored-battery = <&battery>;
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <150000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+
+ };
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-name = "vdd_cpu";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c5 {
+ pinctrl-0 = <&i2c5m1_xfer>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+ <&i2s1m0_sdo0>;
+ pinctrl-names = "default";
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&pinctrl {
+ audio-amplifier {
+ spk_amp_enable_h: spk-amp-enable-h {
+ rockchip,pins =
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gpio-control {
+ btn_pins_ctrl: btn-pins-ctrl {
+ rockchip,pins =
+ <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ btn_pins_vol: btn-pins-vol {
+ rockchip,pins =
+ <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gpio-lcd {
+ lcd_rst: lcd-rst {
+ rockchip,pins =
+ <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gpio-leds {
+ led_pins: led-pins {
+ rockchip,pins =
+ <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hp-detect {
+ hp_det: hp-det {
+ rockchip,pins =
+ <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins =
+ <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vcc-lcd {
+ vcc_lcd_en: vcc-lcd-en {
+ rockchip,pins =
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ vcc-wifi {
+ vcc_wifi_h: vcc-wifi-h {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcca1v8_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcca1v8_pmu>;
+ vccio5-supply = <&vcc2v8_dvp>;
+ vccio6-supply = <&vcc1v8_dvp>;
+ vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+ <&emmc_datastrobe>, <&emmc_rstnout>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+ <&sdmmc0_det>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_wifi>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+ <&sdmmc2m1_det>;
+ pinctrl-names = "default";
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc2v8_dvp>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ phys = <&usb2phy0_otg>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
+
+&vp1 {
+ vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp1>;
+ };
+};
fan: gpio_fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
- gpio-fan,speed-map = <0 0
- 4500 1>;
+ gpio-fan,speed-map =
+ < 0 0>,
+ <4500 1>;
pinctrl-names = "default";
pinctrl-0 = <&fan_en_h>;
#cooling-cells = <2>;
compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
aliases {
+ ethernet0 = &gmac1;
mmc1 = &sdmmc0;
};
compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
aliases {
+ ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
mmc2 = &sdmmc1;
model = "PINE64 RK3566 SOQuartz on Blade carrier board";
compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
vcc3v0_sd: vcc3v0-sd-regulator {
compatible = "regulator-fixed";
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
/* labeled +12v in schematic */
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
model = "PINE64 RK3566 SOQuartz on Model A carrier board";
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
/* labeled DCIN_12V in schematic */
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
compatible = "pine64,soquartz", "rockchip,rk3566";
aliases {
- ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
mmc2 = &sdmmc1;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+ model = "RK3588 CoolPi CM5 EVB";
+ compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ power-supply = <&vcc12v_dcin>;
+ pwms = <&pwm2 0 25000 0>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_lcd: vcc3v3-lcd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdpwr_en>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_otg";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+/* Standard pcie */
+&pcie3x2 {
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+ num-lanes = <2>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd {
+ lcdpwr_en: lcdpwr-en {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bl_en: bl-en {
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ bt_pwron: bt-pwron {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_clkreq: pcie-clkreq {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_rst: pcie-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_pwron: wifi-pwron {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_wake: pcie-wake {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_usb_host1>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_usb_host2>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+ compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ serial2 = &uart2;
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_8ch_p0>;
+ label = "rk3588-es8316";
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v85_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ vin-supply = <&vdd_0v85_s0>;
+ };
+
+ avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd1v8_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v75_pcie30";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ vin-supply = <&avdd_0v75_s0>;
+ };
+
+ pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd1v8";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
+ pinctrl-names = "default";
+ rx_delay = <0x00>;
+ tx_delay = <0x43>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7m0_xfer>;
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&mdio0 {
+ rgmii_phy: ethernet-phy@1 {
+ /* YT8531C/H */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&yt8531_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* ethernet */
+&pcie2x1l2 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&yt6801_isolate>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ yt6801 {
+ yt6801_isolate: yt6801-isolate {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ yt8531 {
+ yt8531_rst: yt8531-rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_2v0_pldo_s3>;
+ vcc14-supply = <&vcc_2v0_pldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6a", "rockchip,rk3588";
- aliases {
- serial2 = &uart2;
- };
-
chosen {
stdout-path = "serial2:1500000n8";
};
/ {
model = "Edgeble Neu6B IO Board";
- compatible = "edgeble,neural-compute-module-6b-io",
+ compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6b", "rockchip,rk3588";
- aliases {
- serial2 = &uart2;
- };
-
chosen {
stdout-path = "serial2:1500000n8";
};
compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
aliases {
+ ethernet0 = &gmac0;
mmc0 = &sdhci;
- serial2 = &uart2;
};
chosen {
};
};
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "RK3588 EVB1 Audio";
+ simple-audio-card,aux-devs = <&_headphone>, <&_speaker>;
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,pin-switches = "Headphones", "Speaker";
+ simple-audio-card,routing =
+ "Speaker Amplifier INL", "LOUT2",
+ "Speaker Amplifier INR", "ROUT2",
+ "Speaker", "Speaker Amplifier OUTL",
+ "Speaker", "Speaker Amplifier OUTR",
+ "Headphones Amplifier INL", "LOUT1",
+ "Headphones Amplifier INR", "ROUT1",
+ "Headphones", "Headphones Amplifier OUTL",
+ "Headphones", "Headphones Amplifier OUTR",
+ "LINPUT1", "Onboard Microphone",
+ "RINPUT1", "Onboard Microphone",
+ "LINPUT2", "Microphone Jack",
+ "RINPUT2", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ amp_headphone: headphone-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&headphone_amplifier_en>;
+ sound-name-prefix = "Headphones Amplifier";
+ };
+
+ amp_speaker: speaker-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&speaker_amplifier_en>;
+ sound-name-prefix = "Speaker Amplifier";
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc12v_dcin>;
};
};
+&i2c7 {
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ AVDD-supply = <&avcc_1v8_codec_s0>;
+ DVDD-supply = <&avcc_1v8_codec_s0>;
+ HPVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_3v3_s0>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
&mdio0 {
rgmii_phy: ethernet-phy@1 {
/* RTL8211F */
};
&pinctrl {
+ audio {
+ hp_detect: headphone-detect {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ headphone_amplifier_en: headphone-amplifier-en {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ speaker_amplifier_en: speaker-amplifier-en {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
rtl8111 {
rtl8111_isolate: rtl8111-isolate {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
pinctrl-names = "default";
spi-max-frequency = <1000000>;
+ system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+ model = "Theobroma Systems RK3588-SBC Jaguar";
+ compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ /* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
+ button-bios-disable {
+ label = "BIOS_DISABLE";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ aliases {
+ ethernet0 = &gmac0;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ rtc0 = &rtc_twi;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ /* DCIN is 12-24V but standard is 12V */
+ dc_12v: dc-12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1_pin>;
+
+ /* LED1 on PCB */
+ led-1 {
+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "heartbeat";
+ color = <LED_COLOR_ID_AMBER>;
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v2_s3: vcc-1v2-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v2_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ /* Exposed on P14 and P15 */
+ vcc_2v8_s3: vcc-2v8-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_2v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_a_vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "5v_usbc1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "5v_usbc2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc3v3_mdot2: vcc3v3-mdot2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_mdot2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc_1v2_s3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_rx_bus2
+ &gmac0_tx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus
+ ð0_pins
+ ð_reset>;
+ tx_delay = <0x10>;
+ rx_delay = <0x10>;
+ snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 100000>;
+
+ status = "okay";
+};
+
+&gpio1 {
+ mdot2e-w-disable1-n-hog {
+ gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m.2 E-key W_DISABLE1#";
+ gpio-hog;
+ };
+};
+
+&gpio4 {
+ mdot2e-w-disable2-n-hog {
+ gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m.2 E-key W_DISABLE2#";
+ gpio-hog;
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ };
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1m4_xfer>;
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6m4_xfer>;
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
+
+ /* Also on 0x55 */
+ eeprom@54 {
+ compatible = "st,24c04", "atmel,24c04";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&i2c8 {
+ pinctrl-0 = <&i2c8m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&mdio0 {
+ rgmii_phy: ethernet-phy@6 {
+ /* KSZ9031 or KSZ9131 */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x6>;
+ clocks = <&cru REFCLKO25M_ETH0_OUT>;
+ };
+};
+
+&pcie2x1l0 {
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
+ vpcie3v3-supply = <&vcc3v3_mdot2>;
+ status = "okay";
+};
+
+&pinctrl {
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ethernet {
+ eth_reset: eth-reset {
+ rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led1_pin: led1-pin {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+ supports-cqe;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ broken-cd;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-name = "vdd_log_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-name = "vcca_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-name = "vdda_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-name = "vcca_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-name = "pldo6_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "vdda_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdda_0v75_s0: nldo-reg3 {
+ regulator-name = "vdda_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-name = "vdda_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-name = "vdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc_5v0_usb_a>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ status = "okay";
+};
+
+/* Mule-ATtiny debug UART; typically baudrate 9600 */
+&uart0 {
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
+
+/* Main debug interface on P20 micro-USB B port and P21 header */
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+/* RS485 on P19 */
+&uart3 {
+ pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+/* Mule-ATtiny UPDI flashing UART */
+&uart7 {
+ pinctrl-0 = <&uart7m0_xfer>;
+ status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ehci {
+ status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ohci {
+ status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ehci {
+ status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ohci {
+ status = "okay";
+};
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
- serial2 = &uart2;
};
chosen {
cpu-supply = <&vdd_cpu_lit_s0>;
};
-&cpu_b0{
+&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
-&cpu_b1{
+&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
-&cpu_b2{
+&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
-&cpu_b3{
+&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
};
&sdmmc {
- max-frequency = <200000000>;
- no-sdio;
- no-mmc;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
+ no-mmc;
+ no-sdio;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
vcc1-supply = <&vcc4v0_sys>;
vcc2-supply = <&vcc4v0_sys>;
vcc3-supply = <&vcc4v0_sys>;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl2";
+ pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
- serial2 = &uart2;
};
chosen {
compatible = "pine64,quartzpro64", "rockchip,rk3588";
aliases {
+ ethernet0 = &gmac0;
mmc0 = &sdhci;
mmc1 = &sdmmc;
- serial2 = &uart2;
};
chosen {
mmc0 = &sdhci;
mmc1 = &sdmmc;
mmc2 = &sdio;
- serial2 = &uart2;
};
chosen {
status = "okay";
};
+&combphy2_psu {
+ status = "okay";
+};
+
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl2";
+ pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
&usb_host1_ohci {
status = "okay";
};
+
+&usb_host2_xhci {
+ status = "okay";
+};
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
- serial2 = &uart2;
- serial9 = &uart9;
};
fan: pwm-fan {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "RK3588S CoolPi 4 Model B";
+ compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_8ch_p0>;
+ label = "rk3588-es8316";
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds>;
+
+ led0: led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: led-red {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usbdcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usbdcin>;
+ };
+
+ avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v85_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ vin-supply = <&vdd_0v85_s0>;
+ };
+
+ avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd1v8_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ vcc3v3_mipi: vcc3v3-mipi-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc3v3_mipi";
+ regulator-boot-on;
+ regulator-always-on;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_u3host_en>;
+ regulator-name = "vcc5v0_otg";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6m3_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ };
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7m0_xfer>;
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8111_isolate>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ led {
+ gpio_leds: gpio-leds {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+ <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ rtl8111 {
+ rtl8111_isolate: rtl8111-isolate {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vcc5v0_u3host_en: vcc5v0-u3host-en {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ bt_reset_gpio: bt-reset-pin {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_gpio: bt-wake-pin {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-wlan {
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_poweren_pin: wifi-poweren-pin {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ pinctrl-0 = <&pwm2m1_pins>;
+ status = "okay";
+};
+
+&pwm13 {
+ pinctrl-names = "active";
+ pinctrl-0 = <&pwm13m2_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-name = "vdd_gpu_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-name = "vdd_log_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-name = "avcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-name = "avdd_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-name = "vcc_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-name = "pldo6_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "vdd_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-name = "avdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-name = "vdd_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-name = "vdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+/* bt */
+&uart9 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
mmc0 = &sdhci;
mmc1 = &sdmmc;
mmc2 = &sdio;
- serial2 = &uart2;
};
chosen {
&gpio1 {
gpio-line-names = /* GPIO1 A0-A7 */
- "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+ "HEADER_27_3v3", "", "", "",
"HEADER_29_1v8", "", "HEADER_7_1v8", "",
/* GPIO1 B0-B7 */
"", "HEADER_31_1v8", "HEADER_33_1v8", "",
"HEADER_11_1v8", "HEADER_13_1v8", "", "",
/* GPIO1 C0-C7 */
- "", "", "", "",
+ "", "HEADER_28_3v3", "", "",
"", "", "", "",
/* GPIO1 D0-D7 */
"", "", "", "",
&gpio4 {
gpio-line-names = /* GPIO4 A0-A7 */
- "", "", "HEADER_37_3v3", "HEADER_32_3v3",
- "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+ "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+ "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
/* GPIO4 B0-B7 */
"", "", "", "HEADER_40_3v3",
- "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+ "HEADER_38_3v3", "HEADER_36_3v3", "", "",
/* GPIO4 C0-C7 */
"", "", "", "",
"", "", "", "",
aliases {
mmc0 = &sdhci;
- serial2 = &uart2;
};
chosen {
compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
aliases {
+ ethernet0 = &gmac1;
mmc0 = &sdmmc;
- serial2 = &uart2;
};
chosen {
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
+ system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
&usb_host1_ohci {
status = "okay";
};
+
+&usb_host2_xhci {
+ status = "okay";
+};
compatible = "radxa,rock-5a", "rockchip,rk3588s";
aliases {
+ ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc;
- serial2 = &uart2;
};
analog-sound {
};
};
+&combphy2_psu {
+ status = "okay";
+};
+
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&usb_host1_ohci {
status = "okay";
};
+
+&usb_host2_xhci {
+ status = "okay";
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
+ serial8 = &uart8;
+ serial9 = &uart9;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
reg = <0x0 0xfd58c000 0x0 0x1000>;
};
+ vop_grf: syscon@fd5a4000 {
+ compatible = "rockchip,rk3588-vop-grf", "syscon";
+ reg = <0x0 0xfd5a4000 0x0 0x2000>;
+ };
+
+ vo1_grf: syscon@fd5a8000 {
+ compatible = "rockchip,rk3588-vo-grf", "syscon";
+ reg = <0x0 0xfd5a8000 0x0 0x100>;
+ };
+
php_grf: syscon@fd5b0000 {
compatible = "rockchip,rk3588-php-grf", "syscon";
reg = <0x0 0xfd5b0000 0x0 0x1000>;
status = "disabled";
};
+ vop: vop@fdd90000 {
+ compatible = "rockchip,rk3588-vop";
+ reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+ reg-names = "vop", "gamma-lut";
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>,
+ <&cru HCLK_VOP>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+ <&cru PCLK_VOP_ROOT>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3",
+ "pclk_vop";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3588_PD_VOP>;
+ rockchip,grf = <&sys_grf>;
+ rockchip,vop-grf = <&vop_grf>;
+ rockchip,vo1-grf = <&vo1_grf>;
+ rockchip,pmu = <&pmu>;
+ status = "disabled";
+
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ vp1: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ vp2: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ vp3: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fdd97e00 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_VOP>;
+ status = "disabled";
+ };
+
uart0: serial@fd890000 {
compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
reg = <0x0 0xfd890000 0x0 0x100>;
reg = <RK3588_PD_USB>;
clocks = <&cru PCLK_PHP_ROOT>,
<&cru ACLK_USB_ROOT>,
+ <&cru ACLK_USB>,
<&cru HCLK_USB_ROOT>,
<&cru HCLK_HOST0>,
<&cru HCLK_HOST_ARB0>,
CPU6: cpu@600 {
device_type = "cpu";
- compatible = "arm,cortex-a55";
+ compatible = "arm,cortex-a75";
reg = <0x0 0x600>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
CPU7: cpu@700 {
device_type = "cpu";
- compatible = "arm,cortex-a55";
+ compatible = "arm,cortex-a75";
reg = <0x0 0x700>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
idle-states {
entry-method = "psci";
- CORE_PD: core-pd {
+ CORE_PD: cpu-pd {
compatible = "arm,idle-state";
entry-latency-us = <4000>;
exit-latency-us = <4000>;
pll2: clock-controller@0 {
compatible = "sprd,ums512-gc-pll";
reg = <0x0 0x100>;
+ clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f040000 0 0x1000>;
cpu = <&CPU0>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f140000 0 0x1000>;
cpu = <&CPU1>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f240000 0 0x1000>;
cpu = <&CPU2>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f340000 0 0x1000>;
cpu = <&CPU3>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f440000 0 0x1000>;
cpu = <&CPU4>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f540000 0 0x1000>;
cpu = <&CPU5>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f640000 0 0x1000>;
cpu = <&CPU6>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f740000 0 0x1000>;
cpu = <&CPU7>;
- clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
- clock-names = "apb_pclk", "clk_cs", "cs_src";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
out-ports {
port {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620-2h10 board DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums9620.dtsi"
+
+/ {
+ model = "Unisoc UMS9620-2H10 Board";
+
+ compatible = "sprd,ums9620-2h10", "sprd,ums9620";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:921600n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620 DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ core4 {
+ cpu = <&CPU4>;
+ };
+ core5 {
+ cpu = <&CPU5>;
+ };
+ core6 {
+ cpu = <&CPU6>;
+ };
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&LIT_CORE_PD>;
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&LIT_CORE_PD>;
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ cpu-idle-states = <&LIT_CORE_PD>;
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ cpu-idle-states = <&LIT_CORE_PD>;
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ cpu-idle-states = <&BIG_CORE_PD>;
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ cpu-idle-states = <&BIG_CORE_PD>;
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ cpu-idle-states = <&BIG_CORE_PD>;
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ cpu-idle-states = <&BIG_CORE_PD>;
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+ LIT_CORE_PD: cpu-pd-lit {
+ compatible = "arm,idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <500>;
+ min-residency-us = <2500>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010000>;
+ };
+
+ BIG_CORE_PD: cpu-pd-big {
+ compatible = "arm,idle-state";
+ entry-latency-us = <4000>;
+ exit-latency-us = <4000>;
+ min-residency-us = <10000>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic: interrupt-controller@12000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x12000000 0 0x20000>, /* GICD */
+ <0x0 0x12040000 0 0x100000>; /* GICR */
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ redistributor-stride = <0x0 0x20000>; /* 128KB stride */
+ #redistributor-regions = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apb@20200000 {
+ compatible = "simple-bus";
+ ranges = <0 0 0x20200000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@0 {
+ compatible = "sprd,ums9620-uart",
+ "sprd,sc9836-uart";
+ reg = <0 0x100>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@10000 {
+ compatible = "sprd,ums9620-uart",
+ "sprd,sc9836-uart";
+ reg = <0x10000 0x100>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ext_26m: clk-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext-26m";
+ };
+
+ ext_4m: clk-4m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <4000000>;
+ clock-output-names = "ext-4m";
+ };
+
+ ext_32k: clk-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ext-32k";
+ };
+
+ rco_100m: clk-100m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "rco-100m";
+ };
+
+ dphy_312m5: dphy-312m5 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <312500000>;
+ clock-output-names = "dphy-312m5";
+ };
+
+ dphy_416m7: dphy-416m7 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <416700000>;
+ clock-output-names = "dphy-416m7";
+ };
+};
};
};
+ bsec: efuse@44000000 {
+ compatible = "st,stm32mp25-bsec";
+ reg = <0x44000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ part_number_otp@24 {
+ reg = <0x24 0x4>;
+ };
+
+ package_otp@1e8 {
+ reg = <0x1e8 0x1>;
+ bits = <0 3>;
+ };
+ };
+
syscfg: syscon@44230000 {
compatible = "st,stm32mp25-syscfg", "syscon";
reg = <0x44230000 0x10000>;
#clock-cells = <0>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mfc_left: region@84000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0 0x84000000 0 0x8000000>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
};
serial_0: serial@14180000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
reg = <0x0 0x14180000 0x0 0x100>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 1>, <&pdma1 0>;
};
serial_1: serial@14190000 {
- compatible = "samsung,exynos4210-uart";
+ compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
reg = <0x0 0x14190000 0x0 0x100>;
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 3>, <&pdma1 2>;
};
pmu_system_controller: system-controller@11400000 {
- compatible = "samsung,exynos7-pmu", "syscon";
+ compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon";
reg = <0x0 0x11400000 0x0 0x5000>;
};
watchdog_0: watchdog@100a0000 {
- compatible = "samsung,exynos7-wdt";
+ compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
reg = <0x0 0x100a0000 0x0 0x100>;
interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
samsung,syscon-phandle = <&pmu_system_controller>;
};
watchdog_1: watchdog@100b0000 {
- compatible = "samsung,exynos7-wdt";
+ compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
reg = <0x0 0x100b0000 0x0 0x100>;
interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
samsung,syscon-phandle = <&pmu_system_controller>;
};
watchdog_2: watchdog@100c0000 {
- compatible = "samsung,exynos7-wdt";
+ compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
reg = <0x0 0x100c0000 0x0 0x100>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
samsung,syscon-phandle = <&pmu_system_controller>;
};
pwm_0: pwm@14100000 {
- compatible = "samsung,exynos4210-pwm";
+ compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
reg = <0x0 0x14100000 0x0 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
};
pwm_1: pwm@14110000 {
- compatible = "samsung,exynos4210-pwm";
+ compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
reg = <0x0 0x14110000 0x0 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
};
hsi2c_0: i2c@14200000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14200000 0x0 0x1000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_1: i2c@14210000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14210000 0x0 0x1000>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_2: i2c@14220000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14220000 0x0 0x1000>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_3: i2c@14230000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14230000 0x0 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_4: i2c@14240000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14240000 0x0 0x1000>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_5: i2c@14250000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14250000 0x0 0x1000>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_6: i2c@14260000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14260000 0x0 0x1000>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
hsi2c_7: i2c@14270000 {
- compatible = "samsung,exynos7-hsi2c";
+ compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
reg = <0x0 0x14270000 0x0 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
clock-names = "fin_pll", "mct";
};
+ mfc: mfc@12880000 {
+ compatible = "tesla,fsd-mfc";
+ reg = <0x0 0x12880000 0x0 0x10000>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "mfc";
+ clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>;
+ memory-region = <&mfc_left>;
+ };
+
ufs: ufs@15120000 {
compatible = "tesla,fsd-ufs";
reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x10000>,
+ <0x00 0x484a0000 0x00 0x2000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x1000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
main_gpio0: gpio@600000 {
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00600000 0x0 0x100>;
+ gpio-ranges = <&main_pmx0 0 0 32>,
+ <&main_pmx0 32 33 38>,
+ <&main_pmx0 70 72 22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00601000 0x0 0x100>;
gpio-controller;
+ gpio-ranges = <&main_pmx0 0 94 41>,
+ <&main_pmx0 41 136 6>,
+ <&main_pmx0 47 143 3>,
+ <&main_pmx0 50 149 2>;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <180>, <181>, <182>,
};
};
+ gpu: gpu@fd00000 {
+ compatible = "ti,am62-gpu", "img,img-axe";
+ reg = <0x00 0x0fd00000 0x00 0x20000>;
+ clocks = <&k3_clks 187 0>;
+ clock-names = "core";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+ };
+
cpsw3g: ethernet@8000000 {
compatible = "ti,am642-cpsw-nuss";
#address-cells = <2>;
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ ti_csi2rx0: ticsi2rx@30102000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma 0 0x4700 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x30102000 0x00 0x1000>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx0: csi-bridge@30101000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x30101000 0x00 0x1000>;
+ clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+ <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi0_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi0_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi0_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi0_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ dphy0: phy@30110000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x30110000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
};
/* Verdin UART_2 */
&wkup_uart0 {
- /* FIXME: WKUP UART0 is used by DM firmware */
- status = "reserved";
+ status = "okay";
};
/* Verdin UART_2 */
&wkup_uart0 {
- /* FIXME: WKUP UART0 is used by DM firmware */
- status = "reserved";
+ status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+ <&pinctrl_qspi1_cs_gpio>,
+ <&pinctrl_qspi1_io0_gpio>,
+ <&pinctrl_qspi1_io1_gpio>;
+
+ /* SODIMM 52 - USER_LED_1_RED */
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 54 - USER_LED_1_GREEN */
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 56 - USER_LED_2_RED */
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* SODIMM 58 - USER_LED_2_GREEN */
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Verdin ETH */
+&cpsw3g {
+ status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+ status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+ status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+ status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+ status = "okay";
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+ <&pinctrl_gpio_1>,
+ <&pinctrl_gpio_2>,
+ <&pinctrl_gpio_3>,
+ <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+ status = "okay";
+
+ /* Temperature sensor */
+ sensor@4f {
+ compatible = "ti,tmp1075";
+ reg = <0x4f>;
+ };
+
+ /* EEPROM */
+ eeprom@57 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+ status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+ status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+ status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+ pinctrl-0 = <&pinctrl_spi1>,
+ <&pinctrl_spi1_cs0>,
+ <&pinctrl_qspi1_cs2_gpio>;
+ cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+ status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+ status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+ status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+ status = "okay";
+};
/* Verdin UART_2 */
&wkup_uart0 {
- /* FIXME: WKUP UART0 is used by DM firmware */
- status = "reserved";
+ status = "okay";
};
>;
};
+ /* Verdin SPI_1 CS as GPIO */
+ pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */
+ >;
+ };
+
/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
pinctrl-single,pins = <
pinctrl_spi1: main-spi1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
- AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0 */ /* SODIMM 200 */
AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1 */ /* SODIMM 198 */
>;
};
+ /* Verdin SPI_1 CS */
+ pinctrl_spi1_cs0: main-spi1-cs0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+ >;
+ };
+
/* ETH_25MHz_CLK */
pinctrl_eth_clock: main-system-clkout0-default-pins {
pinctrl-single,pins = <
/* Verdin SPI_1 */
&main_spi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1>;
+ pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>;
ti,pindir-d0-out-d1-in;
status = "disabled";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ clk_ov5640_fixed: ov5640-xclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+};
+
+&main_gpio0 {
+ p11-hog {
+ /* P11 - CSI2_CAMERA_GPIO1 */
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "CSI2_CAMERA_GPIO1";
+ };
+};
+
+&wkup_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ clk_ov5640_fixed: ov5640-xclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+};
+
+&main_gpio0 {
+ p11-hog {
+ /* P11 - CSI2_CAMERA_GPIO1 */
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "CSI2_CAMERA_GPIO1";
+ };
+};
+
+&wkup_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
>;
};
- console_pins_default: console-default-pins {
+ main_uart0_pins_default: main-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
&main_uart0 {
bootph-all;
pinctrl-names = "default";
- pinctrl-0 = <&console_pins_default>;
+ pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
};
standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
};
+ hdmi0: connector-hdmi {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&sii9022_out>;
+ };
+ };
+ };
+
keys {
compatible = "gpio-keys";
autorepeat;
>;
};
+ hdmi_int_pins_default: hdmi-int-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+ >;
+ };
+
+ main_dss0_pins_default: main-dss0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+ AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+ AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+ AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+ AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+ AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+ AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+ AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+ AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+ AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+ AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+ AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+ AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+ AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+ AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+ AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+ AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+ AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+ AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+ AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+ >;
+ };
+
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
};
};
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_dss0_pins_default>;
+ status = "okay";
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VP2: DPI/HDMI Output */
+ port@1 {
+ reg = <1>;
+
+ dpi1_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
status = "okay";
gpio_exp: gpio-expander@21 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+ gpio-line-names = "", "GPIO1_CAN0_nEN",
"GPIO2_LED2", "GPIO3_LVDS_GPIO",
"GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
"GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
};
+ sii9022: bridge-hdmi@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_int_pins_default>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
eeprom@51 {
compatible = "atmel,24c02";
pagesize = <16>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin AM62 on Mallow Board";
+ compatible = "toradex,verdin-am62-nonwifi-mallow",
+ "toradex,verdin-am62-nonwifi",
+ "toradex,verdin-am62",
+ "ti,am625";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+ model = "Toradex Verdin AM62 WB on Mallow Board";
+ compatible = "toradex,verdin-am62-wifi-mallow",
+ "toradex,verdin-am62-wifi",
+ "toradex,verdin-am62",
+ "ti,am625";
+};
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
ti,sci = <&dmsc>;
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x10000>,
+ <0x00 0x484a0000 0x00 0x2000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x1000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
ti,sci = <&dmsc>;
};
};
+ dmss_csi: bus@4e000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges;
+ ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+ ti,sci-dev-id = <198>;
+
+ inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+ compatible = "ti,sci-inta";
+ reg = <0x00 0x4e0a0000 0x00 0x8000>;
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <200>;
+ ti,interrupt-ranges = <0 237 8>;
+ ti,unmapped-event-sources = <&main_bcdma_csi>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_bcdma_csi: dma-controller@4e230000 {
+ compatible = "ti,am62a-dmss-bcdma-csirx";
+ reg = <0x00 0x4e230000 0x00 0x100>,
+ <0x00 0x4e180000 0x00 0x8000>,
+ <0x00 0x4e100000 0x00 0x10000>;
+ reg-names = "gcfg", "rchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss_csi>;
+ #dma-cells = <3>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <199>;
+ ti,sci-rm-range-rchan = <0x21>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ };
+ };
+
dmsc: system-controller@44043000 {
compatible = "ti,k2g-sci";
reg = <0x00 0x44043000 0x00 0xfe0>;
<193>, <194>, <195>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <87>;
+ ti,ngpio = <92>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 77 0>;
<183>, <184>, <185>;
interrupt-controller;
#interrupt-cells = <2>;
- ti,ngpio = <88>;
+ ti,ngpio = <52>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 78 0>;
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ ti_csi2rx0: ticsi2rx@30102000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma_csi 0 0x5000 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x30102000 0x00 0x1000>;
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx0: csi-bridge@30101000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x30101000 0x00 0x1000>;
+ clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+ <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi0_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi0_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi0_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi0_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ dphy0: phy@30110000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x30110000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
};
AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
>;
};
+
+ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+ >;
+ };
};
&mcu_pmx0 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
"BT_EN_SOC", "MMC1_SD_EN",
DRVDD-supply = <&vcc_3v3_sys>;
DVDD-supply = <&buck5>;
};
+
+ exp2: gpio@23 {
+ compatible = "ti,tca6424";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "", "",
+ "", "",
+ "", "",
+ "", "",
+ "WL_LT_EN", "CSI_RSTz",
+ "", "",
+ "", "",
+ "", "",
+ "SPI0_FET_SEL", "SPI0_FET_OE",
+ "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+ "CSI_EN", "AUTO_100M_1000M_CONFIG",
+ "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+ };
+};
+
+&main_i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
};
&sdhci1 {
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x10000>,
+ <0x00 0x484a0000 0x00 0x2000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x1000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
bootph-all;
status = "reserved";
bootph-all;
};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+ status = "reserved";
+};
+
+&mcu_gpio_intr {
+ status = "reserved";
+};
};
};
+&main_i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
+};
+
&sdhci0 {
bootph-all;
status = "okay";
};
};
};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+ status = "reserved";
+};
+
+&mcu_gpio_intr {
+ status = "reserved";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IMX219 (RPi v2) Camera Module
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ clk_imx219_fixed: imx219-xclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+};
+
+&main_i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9543";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /* CAM port */
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ ov5640: camera@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+
+ clocks = <&clk_imx219_fixed>;
+ clock-names = "xclk";
+
+ reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ link-frequencies = /bits/ 64 <456000000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ clk_ov5640_fixed: ov5640-xclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+};
+
+&main_i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9543";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /* CAM port */
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+ powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ clk_ov5640_fixed: ov5640-xclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+};
+
+&main_i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9543";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /* CAM port */
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+ powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
#phy-cells = <1>;
};
- epwm_tbclk: clock-controller@4140 {
+ epwm_tbclk: clock-controller@4130 {
compatible = "ti,am64-epwm-tbclk";
reg = <0x4130 0x4>;
#clock-cells = <1>;
<0x00 0x4c000000 0x00 0x20000>,
<0x00 0x4a820000 0x00 0x20000>,
<0x00 0x4aa40000 0x00 0x20000>,
- <0x00 0x4bc00000 0x00 0x100000>;
- reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4bc00000 0x00 0x100000>,
+ <0x00 0x48600000 0x00 0x8000>,
+ <0x00 0x484a4000 0x00 0x2000>,
+ <0x00 0x484c2000 0x00 0x2000>,
+ <0x00 0x48420000 0x00 0x2000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "bchan";
msi-parent = <&inta_main_dmss>;
#dma-cells = <3>;
reg = <0x00 0x485c0000 0x00 0x100>,
<0x00 0x4a800000 0x00 0x20000>,
<0x00 0x4aa00000 0x00 0x40000>,
- <0x00 0x4b800000 0x00 0x400000>;
- reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ <0x00 0x4b800000 0x00 0x400000>,
+ <0x00 0x485e0000 0x00 0x20000>,
+ <0x00 0x484a0000 0x00 0x4000>,
+ <0x00 0x484c0000 0x00 0x2000>,
+ <0x00 0x48430000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+ "ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x6>;
ti,otap-del-sel-hs200 = <0x7>;
+ status = "disabled";
};
sdhci1: mmc@fa00000 {
ti,otap-del-sel-sdr104 = <0x6>;
ti,otap-del-sel-ddr50 = <0x9>;
ti,clkbuf-sel = <0x7>;
+ status = "disabled";
};
cpsw3g: ethernet@8000000 {
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
alignment = <0x1000>;
no-map;
};
+
+ main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
};
leds {
status = "disabled";
};
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 2>;
+ ti,mbox-tx = <1 0 2>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 2>;
+ ti,mbox-tx = <3 0 2>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 2>;
+ ti,mbox-tx = <1 0 2>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 2>;
+ ti,mbox-tx = <3 0 2>;
+ };
+};
+
&main_i2c0 {
status = "okay";
pinctrl-names = "default";
};
};
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
&ospi0 {
status = "okay";
pinctrl-names = "default";
};
&sdhci0 {
+ status = "okay";
bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
bootph-all;
};
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
&mcu_gpio0 {
status = "reserved";
};
+&mcu_gpio_intr {
+ status = "reserved";
+};
+
&main_spi0 {
status = "okay";
pinctrl-names = "default";
};
};
+/* eMMC */
&sdhci0 {
- /* emmc */
+ status = "okay";
bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
disable-wp;
};
+/* SD/MMC */
&sdhci1 {
- /* SD/MMC */
bootph-all;
+ status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
bus-width = <4>;
};
&sdhci1 {
+ status = "okay";
vmmc-supply = <&vcc_3v3_mmc>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
};
};
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
&mcu_gpio0 {
status = "reserved";
};
+&mcu_gpio_intr {
+ status = "reserved";
+};
+
&sdhci0 {
+ status = "okay";
vmmc-supply = <&wlan_en>;
bus-width = <4>;
non-removable;
};
};
+/* SD/MMC */
&sdhci1 {
- /* SD/MMC */
bootph-all;
+ status = "okay";
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
bus-width = <4>;
ti,driver-strength-ohm = <50>;
ti,fails-without-test-cd;
/* Enabled by overlay */
- status = "disabled";
};
&tscadc0 {
};
&sdhci0 {
+ status = "okay";
non-removable;
disable-wp;
no-sdio;
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
*
* Authors:
* Jan Kiszka <jan.kiszka@siemens.com>
&tx_pru2_1 {
status = "disabled";
};
+
+&icssg0_eth {
+ status = "disabled";
+};
+
+&icssg0_mdio {
+ status = "disabled";
+};
&main_gpio1 {
pinctrl-names = "default";
- pinctrl-0 = <&cp2102n_reset_pin_default>;
+ pinctrl-0 =
+ <&main_pcie_enable_pins_default>,
+ <&cp2102n_reset_pin_default>;
gpio-line-names =
"", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
* Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
*/
-#include "k3-am654.dtsi"
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/net/ti-dp83867.h>
/ {
aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ i2c0 = &wkup_i2c0;
+ i2c1 = &mcu_i2c0;
+ i2c2 = &main_i2c0;
+ i2c3 = &main_i2c1;
+ i2c4 = &main_i2c2;
+ i2c5 = &main_i2c3;
spi0 = &mcu_spi0;
mmc0 = &sdhci1;
mmc1 = &sdhci0;
+ ethernet1 = &icssg0_emac0;
+ ethernet2 = &icssg0_emac1;
};
chosen {
#clock-cells = <0>;
clock-frequency = <19200000>;
};
+
+ /* Dual Ethernet application node on PRU-ICSSG0 */
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>,
+ <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+ <&main_udmap 0xc101>, /* egress slice 0 */
+ <&main_udmap 0xc102>, /* egress slice 0 */
+ <&main_udmap 0xc103>, /* egress slice 0 */
+ <&main_udmap 0xc104>, /* egress slice 1 */
+ <&main_udmap 0xc105>, /* egress slice 1 */
+ <&main_udmap 0xc106>, /* egress slice 1 */
+ <&main_udmap 0xc107>, /* egress slice 1 */
+ <&main_udmap 0x4100>, /* ingress slice 0 */
+ <&main_udmap 0x4101>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_eth0_phy>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+ ti,half-duplex-capable;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_eth1_phy>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+ ti,half-duplex-capable;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
};
&wkup_pmx0 {
+ pinctrl-names =
+ "default",
+ "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown",
+ "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown",
+ "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown",
+ "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown",
+ "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+ "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+ "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+ "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+ "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+ "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+ "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+ "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+ "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+ "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+ pinctrl-0 = <&d0_uart0_rxd>;
+ pinctrl-1 = <&d0_uart0_rxd>;
+ pinctrl-2 = <&d0_gpio>;
+ pinctrl-3 = <&d0_gpio_pullup>;
+ pinctrl-4 = <&d0_gpio_pulldown>;
+ pinctrl-5 = <&d1_uart0_txd>;
+ pinctrl-6 = <&d1_gpio>;
+ pinctrl-7 = <&d1_gpio_pullup>;
+ pinctrl-8 = <&d1_gpio_pulldown>;
+ pinctrl-9 = <&d2_uart0_ctsn>;
+ pinctrl-10 = <&d2_gpio>;
+ pinctrl-11 = <&d2_gpio_pullup>;
+ pinctrl-12 = <&d2_gpio_pulldown>;
+ pinctrl-13 = <&d3_uart0_rtsn>;
+ pinctrl-14 = <&d3_gpio>;
+ pinctrl-15 = <&d3_gpio_pullup>;
+ pinctrl-16 = <&d3_gpio_pulldown>;
+ pinctrl-17 = <&d10_spi0_cs0>;
+ pinctrl-18 = <&d10_gpio>;
+ pinctrl-19 = <&d10_gpio_pullup>;
+ pinctrl-20 = <&d10_gpio_pulldown>;
+ pinctrl-21 = <&d11_spi0_d0>;
+ pinctrl-22 = <&d11_gpio>;
+ pinctrl-23 = <&d11_gpio_pullup>;
+ pinctrl-24 = <&d11_gpio_pulldown>;
+ pinctrl-25 = <&d12_spi0_d1>;
+ pinctrl-26 = <&d12_gpio>;
+ pinctrl-27 = <&d12_gpio_pullup>;
+ pinctrl-28 = <&d12_gpio_pulldown>;
+ pinctrl-29 = <&d13_spi0_clk>;
+ pinctrl-30 = <&d13_gpio>;
+ pinctrl-31 = <&d13_gpio_pullup>;
+ pinctrl-32 = <&d13_gpio_pulldown>;
+ pinctrl-33 = <&a0_gpio>;
+ pinctrl-34 = <&a0_gpio_pullup>;
+ pinctrl-35 = <&a0_gpio_pulldown>;
+ pinctrl-36 = <&a1_gpio>;
+ pinctrl-37 = <&a1_gpio_pullup>;
+ pinctrl-38 = <&a1_gpio_pulldown>;
+ pinctrl-39 = <&a2_gpio>;
+ pinctrl-40 = <&a2_gpio_pullup>;
+ pinctrl-41 = <&a2_gpio_pulldown>;
+ pinctrl-42 = <&a3_gpio>;
+ pinctrl-43 = <&a3_gpio_pullup>;
+ pinctrl-44 = <&a3_gpio_pulldown>;
+ pinctrl-45 = <&a4_gpio>;
+ pinctrl-46 = <&a4_gpio_pullup>;
+ pinctrl-47 = <&a4_gpio_pulldown>;
+ pinctrl-48 = <&a5_gpio>;
+ pinctrl-49 = <&a5_gpio_pullup>;
+ pinctrl-50 = <&a5_gpio_pulldown>;
+
+ d0_uart0_rxd: d0-uart0-rxd-pins {
+ pinctrl-single,pins = <
+ /* (P4) MCU_UART0_RXD */
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+ >;
+ };
+
+ d0_gpio: d0-gpio-pins {
+ pinctrl-single,pins = <
+ /* (P4) WKUP_GPIO0_29 */
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+ >;
+ };
+
+ d0_gpio_pullup: d0-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (P4) WKUP_GPIO0_29 */
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d0_gpio_pulldown: d0-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (P4) WKUP_GPIO0_29 */
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d1_uart0_txd: d1-uart0-txd-pins {
+ pinctrl-single,pins = <
+ /* (P5) MCU_UART0_TXD */
+ AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+ >;
+ };
+
+ d1_gpio: d1-gpio-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_30 */
+ AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+ >;
+ };
+
+ d1_gpio_pullup: d1-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_30 */
+ AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+ >;
+ };
+
+ d1_gpio_pulldown: d1-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_30 */
+ AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d2_uart0_ctsn: d2-uart0-ctsn-pins {
+ pinctrl-single,pins = <
+ /* (P1) MCU_UART0_CTSn */
+ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+ >;
+ };
+
+ d2_gpio: d2-gpio-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_31 */
+ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+ >;
+ };
+
+ d2_gpio_pullup: d2-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_31 */
+ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+ >;
+ };
+
+ d2_gpio_pulldown: d2-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (P5) WKUP_GPIO0_31 */
+ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d3_uart0_rtsn: d3-uart0-rtsn-pins {
+ pinctrl-single,pins = <
+ /* (N3) MCU_UART0_RTSn */
+ AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+ >;
+ };
+
+ d3_gpio: d3-gpio-pins {
+ pinctrl-single,pins = <
+ /* (N3) WKUP_GPIO0_33 */
+ AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+ >;
+ };
+
+ d3_gpio_pullup: d3-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (N3) WKUP_GPIO0_33 */
+ AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+ >;
+ };
+
+ d3_gpio_pulldown: d3-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (N3) WKUP_GPIO0_33 */
+ AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d10_spi0_cs0: d10-spi0-cs0-pins {
+ pinctrl-single,pins = <
+ /* (Y4) MCU_SPI0_CS0 */
+ AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+ >;
+ };
+
+ d10_gpio: d10-gpio-pins {
+ pinctrl-single,pins = <
+ /* (Y4) WKUP_GPIO0_51 */
+ AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+ >;
+ };
+
+ d10_gpio_pullup: d10-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (Y4) WKUP_GPIO0_51 */
+ AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+ >;
+ };
+
+ d10_gpio_pulldown: d10-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (Y4) WKUP_GPIO0_51 */
+ AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d11_spi0_d0: d11-spi0-d0-pins {
+ pinctrl-single,pins = <
+ /* (Y3) MCU_SPI0_D0 */
+ AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+ >;
+ };
+
+ d11_gpio: d11-gpio-pins {
+ pinctrl-single,pins = <
+ /* (Y3) WKUP_GPIO0_49 */
+ AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+ >;
+ };
+
+ d11_gpio_pullup: d11-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (Y3) WKUP_GPIO0_49 */
+ AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+ >;
+ };
+
+ d11_gpio_pulldown: d11-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (Y3) WKUP_GPIO0_49 */
+ AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d12_spi0_d1: d12-spi0-d1-pins {
+ pinctrl-single,pins = <
+ /* (Y2) MCU_SPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+ >;
+ };
+
+ d12_gpio: d12-gpio-pins {
+ pinctrl-single,pins = <
+ /* (Y2) WKUP_GPIO0_50 */
+ AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+ >;
+ };
+
+ d12_gpio_pullup: d12-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (Y2) WKUP_GPIO0_50 */
+ AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+ >;
+ };
+
+ d12_gpio_pulldown: d12-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (Y2) WKUP_GPIO0_50 */
+ AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d13_spi0_clk: d13-spi0-clk-pins {
+ pinctrl-single,pins = <
+ /* (Y1) MCU_SPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+ >;
+ };
+
+ d13_gpio: d13-gpio-pins {
+ pinctrl-single,pins = <
+ /* (Y1) WKUP_GPIO0_48 */
+ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+ >;
+ };
+
+ d13_gpio_pullup: d13-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (Y1) WKUP_GPIO0_48 */
+ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+ >;
+ };
+
+ d13_gpio_pulldown: d13-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (Y1) WKUP_GPIO0_48 */
+ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a0_gpio: a0-gpio-pins {
+ pinctrl-single,pins = <
+ /* (L6) WKUP_GPIO0_45 */
+ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+ >;
+ };
+
+ a0_gpio_pullup: a0-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (L6) WKUP_GPIO0_45 */
+ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+ >;
+ };
+
+ a0_gpio_pulldown: a0-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (L6) WKUP_GPIO0_45 */
+ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a1_gpio: a1-gpio-pins {
+ pinctrl-single,pins = <
+ /* (M6) WKUP_GPIO0_44 */
+ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+ >;
+ };
+
+ a1_gpio_pullup: a1-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (M6) WKUP_GPIO0_44 */
+ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+ >;
+ };
+
+ a1_gpio_pulldown: a1-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (M6) WKUP_GPIO0_44 */
+ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a2_gpio: a2-gpio-pins {
+ pinctrl-single,pins = <
+ /* (L5) WKUP_GPIO0_43 */
+ AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+ >;
+ };
+
+ a2_gpio_pullup: a2-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (L5) WKUP_GPIO0_43 */
+ AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+ >;
+ };
+
+ a2_gpio_pulldown: a2-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (L5) WKUP_GPIO0_43 */
+ AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a3_gpio: a3-gpio-pins {
+ pinctrl-single,pins = <
+ /* (M5) WKUP_GPIO0_39 */
+ AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+ >;
+ };
+
+ a3_gpio_pullup: a3-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (M5) WKUP_GPIO0_39 */
+ AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+ >;
+ };
+
+ a3_gpio_pulldown: a3-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (M5) WKUP_GPIO0_39 */
+ AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a4_gpio: a4-gpio-pins {
+ pinctrl-single,pins = <
+ /* (L2) WKUP_GPIO0_42 */
+ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+ >;
+ };
+
+ a4_gpio_pullup: a4-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (L2) WKUP_GPIO0_42 */
+ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+ >;
+ };
+
+ a4_gpio_pulldown: a4-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (L2) WKUP_GPIO0_42 */
+ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ a5_gpio: a5-gpio-pins {
+ pinctrl-single,pins = <
+ /* (N5) WKUP_GPIO0_35 */
+ AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+ >;
+ };
+
+ a5_gpio_pullup: a5-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (N5) WKUP_GPIO0_35 */
+ AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ a5_gpio_pulldown: a5-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (N5) WKUP_GPIO0_35 */
+ AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
pinctrl-single,pins = <
/* (AC7) WKUP_I2C0_SCL */
>;
};
- arduino_uart_pins_default: arduino-uart-default-pins {
- pinctrl-single,pins = <
- /* (P4) MCU_UART0_RXD */
- AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
- /* (P5) MCU_UART0_TXD */
- AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
- >;
- };
-
- arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
- pinctrl-single,pins = <
- /* (P1) WKUP_GPIO0_31 */
- AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
- /* (N3) WKUP_GPIO0_33 */
- AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
- >;
- };
arduino_io_oe_pins_default: arduino-io-oe-default-pins {
pinctrl-single,pins = <
};
&main_pmx0 {
+ pinctrl-names =
+ "default",
+ "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+ "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+ "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+ "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+ "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+ "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+ pinctrl-0 = <&d4_ehrpwm0_a>;
+ pinctrl-1 = <&d4_ehrpwm0_a>;
+ pinctrl-2 = <&d4_gpio>;
+ pinctrl-3 = <&d4_gpio_pullup>;
+ pinctrl-4 = <&d4_gpio_pulldown>;
+
+ pinctrl-5 = <&d5_ehrpwm1_a>;
+ pinctrl-6 = <&d5_gpio>;
+ pinctrl-7 = <&d5_gpio_pullup>;
+ pinctrl-8 = <&d5_gpio_pulldown>;
+
+ pinctrl-9 = <&d6_ehrpwm2_a>;
+ pinctrl-10 = <&d6_gpio>;
+ pinctrl-11 = <&d6_gpio_pullup>;
+ pinctrl-12 = <&d6_gpio_pulldown>;
+
+ pinctrl-13 = <&d7_ehrpwm3_a>;
+ pinctrl-14 = <&d7_gpio>;
+ pinctrl-15 = <&d7_gpio_pullup>;
+ pinctrl-16 = <&d7_gpio_pulldown>;
+
+ pinctrl-17 = <&d8_ehrpwm4_a>;
+ pinctrl-18 = <&d8_gpio>;
+ pinctrl-19 = <&d8_gpio_pullup>;
+ pinctrl-20 = <&d8_gpio_pulldown>;
+
+ pinctrl-21 = <&d9_ehrpwm5_a>;
+ pinctrl-22 = <&d9_gpio>;
+ pinctrl-23 = <&d9_gpio_pullup>;
+ pinctrl-24 = <&d9_gpio_pulldown>;
+
+ d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+ pinctrl-single,pins = <
+ /* (AG18) EHRPWM0_A */
+ AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d4_gpio: d4-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AG18) GPIO0_33 */
+ AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+ >;
+ };
+
+ d4_gpio_pullup: d4-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AG18) GPIO0_33 */
+ AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d4_gpio_pulldown: d4-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AG18) GPIO0_33 */
+ AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+ pinctrl-single,pins = <
+ /* (AF17) EHRPWM1_A */
+ AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d5_gpio: d5-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AF17) GPIO0_35 */
+ AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+ >;
+ };
+
+ d5_gpio_pullup: d5-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AF17) GPIO0_35 */
+ AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d5_gpio_pulldown: d5-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AF17) GPIO0_35 */
+ AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+ pinctrl-single,pins = <
+ /* (AH16) EHRPWM2_A */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d6_gpio: d6-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AH16) GPIO0_38 */
+ AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+ >;
+ };
+
+ d6_gpio_pullup: d6-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AH16) GPIO0_38 */
+ AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d6_gpio_pulldown: d6-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AH16) GPIO0_38 */
+ AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+ pinctrl-single,pins = <
+ /* (AH15) EHRPWM3_A */
+ AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d7_gpio: d7-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AH15) GPIO0_43 */
+ AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+ >;
+ };
+
+ d7_gpio_pullup: d7-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AH15) GPIO0_43 */
+ AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d7_gpio_pulldown: d7-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AH15) GPIO0_43 */
+ AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+ pinctrl-single,pins = <
+ /* (AG15) EHRPWM4_A */
+ AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d8_gpio: d8-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AG15) GPIO0_48 */
+ AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+ >;
+ };
+
+ d8_gpio_pullup: d8-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AG15) GPIO0_48 */
+ AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d8_gpio_pulldown: d8-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AG15) GPIO0_48 */
+ AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+ pinctrl-single,pins = <
+ /* (AD15) EHRPWM5_A */
+ AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+ >;
+ };
+
+ d9_gpio: d9-gpio-pins {
+ pinctrl-single,pins = <
+ /* (AD15) GPIO0_51 */
+ AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+ >;
+ };
+
+ d9_gpio_pullup: d9-gpio-pullup-pins {
+ pinctrl-single,pins = <
+ /* (AD15) GPIO0_51 */
+ AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+ >;
+ };
+
+ d9_gpio_pulldown: d9-gpio-pulldown-pins {
+ pinctrl-single,pins = <
+ /* (AD15) GPIO0_51 */
+ AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+ >;
+ };
+
+ main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */
+ >;
+ };
+
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */
>;
};
- arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */
- AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */
- AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */
- AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */
- AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */
- AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */
- >;
- };
-
dss_vout1_pins_default: dss-vout1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */
>;
};
+
+ icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+ AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+ >;
+ };
+
+ icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+ AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+ AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+ AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+ AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+ AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+ AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+ AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+ AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ >;
+ };
};
&main_pmx1 {
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
>;
};
-
- ecap0_pins_default: ecap0-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
- >;
- };
};
&wkup_uart0 {
&mcu_uart0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&arduino_uart_pins_default>;
};
&main_gpio0 {
- pinctrl-names = "default";
- pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
gpio-line-names =
"main_gpio0-base", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "",
"", "IO9";
};
+&main_gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_pcie_enable_pins_default>;
+};
+
&wkup_gpio0 {
pinctrl-names = "default";
pinctrl-0 =
- <&arduino_io_d2_to_d3_pins_default>,
<&arduino_i2c_aio_switch_pins_default>,
<&arduino_io_oe_pins_default>,
<&push_button_pins_default>,
status = "disabled";
};
-&ecap0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ecap0_pins_default>;
-};
-
&sdhci1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
&mcu_spi0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_spi0_pins_default>;
-
#address-cells = <1>;
#size-cells = <0>;
ti,pindir-d0-out-d1-in;
<&mcu_r5fss0_core1_memory_region>;
mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_mdio_pins_default>;
+
+ icssg0_eth0_phy: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg0_eth1_phy: ethernet-phy@1 {
+ reg = <1>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
ti,otap-del-sel-hs400 = <0x0>;
ti,trm-icp = <0x8>;
dma-coherent;
+ status = "disabled";
};
sdhci1: mmc@4fa0000 {
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
+ status = "disabled";
};
scm_conf: scm-conf@100000 {
};
dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
- compatible = "syscon";
- reg = <0x000041e0 0x14>;
+ compatible = "ti,am654-dss-oldi-io-ctrl", "syscon";
+ reg = <0x41e0 0x14>;
};
ehrpwm_tbclk: clock-controller@4140 {
compatible = "ti,am654-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x100000>,
+ <0x0 0x30b00000 0x0 0x10000>,
+ <0x0 0x30c00000 0x0 0x10000>,
+ <0x0 0x30d00000 0x0 0x8000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
assigned-clocks = <&k3_clks 67 2>;
assigned-clock-parents = <&k3_clks 67 5>;
- interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
compatible = "ti,am654-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
};
};
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x43000014 0x4>;
+ wkup_conf: bus@43000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
wkup_pmx0: pinctrl@4301c000 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM65 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ next-level-cache = <&msmc_l3>;
+ };
+
+ msmc_l3: l3-cache0 {
+ compatible = "cache";
+ cache-level = <3>;
+ cache-unified;
+ };
+
+ thermal_zones: thermal-zones {
+ #include "k3-am654-industrial-thermal.dtsi"
+ };
+};
* Common bits of the IOT2050 Basic variant, PG1 and PG2
*/
+#include "k3-am652.dtsi"
#include "k3-am65-iot2050-common.dtsi"
/ {
/* 1G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};
-
- cpus {
- cpu-map {
- /delete-node/ cluster1;
- };
- /delete-node/ cpu@100;
- /delete-node/ cpu@101;
- };
-
- /delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
- status = "disabled";
};
&main_pmx0 {
};
&sdhci0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
bus-width = <8>;
* disable sdhci1
*/
&sdhci1 {
+ status = "okay";
vmmc-supply = <&vdd_mmc1_sd>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
/dts-v1/;
+#include "k3-am654.dtsi"
#include "k3-am65-iot2050-common.dtsi"
/ {
/* eMMC */
&sdhci0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
bus-width = <8>;
};
&main_pmx0 {
- main_m2_enable_pins_default: main-m2-enable-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */
- >;
- };
-
main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */
&main_gpio0 {
pinctrl-names = "default";
- pinctrl-0 =
- <&main_m2_pcie_mux_control>,
- <&arduino_io_d4_to_d9_pins_default>;
+ pinctrl-0 = <&main_m2_pcie_mux_control>;
};
&main_gpio1 {
pinctrl-names = "default";
pinctrl-0 =
- <&main_m2_enable_pins_default>,
+ <&main_pcie_enable_pins_default>,
<&main_pmx0_m2_config_pins_default>,
<&main_pmx1_m2_config_pins_default>,
<&cp2102n_reset_pin_default>;
can1 = &mcu_mcan1;
can2 = &main_mcan6;
can3 = &main_mcan7;
+ ethernet0 = &cpsw_port1;
};
vusb_main: regulator-vusb-main5v0 {
&wkup_pmx2 {
bootph-all;
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ /* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
+ J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
+ >;
+ };
+
wkup_uart0_pins_default: wkup-uart0-default-pins {
bootph-all;
pinctrl-single,pins = <
compatible = "atmel,24c512";
reg = <0x51>;
};
+
+ tps659413: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck12-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka12: buck12 {
+ regulator-name = "vdd_ddr_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka3: buck3 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka4: buck4 {
+ regulator-name = "vdd_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vdd_mcuio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vds_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&wkup_gpio0 {
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
- gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+ gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
compatible = "ti,j721e-navss-main-udmap";
reg = <0x00 0x31150000 0x00 0x100>,
<0x00 0x34000000 0x00 0x100000>,
- <0x00 0x35000000 0x00 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x35000000 0x00 0x100000>,
+ <0x00 0x30b00000 0x00 0x4000>,
+ <0x00 0x30c00000 0x00 0x4000>,
+ <0x00 0x30d00000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
ti,otap-del-sel-hs400 = <0x5>;
ti,itap-del-sel-legacy = <0x10>;
ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,itap-del-sel-ddr52 = <0x3>;
ti,strobe-sel = <0x77>;
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
};
};
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x00 0x43000014 0x00 0x4>;
+ wkup_conf: bus@43000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x00 0x285c0000 0x00 0x100>,
<0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x2aa00000 0x00 0x40000>,
+ <0x00 0x284a0000 0x00 0x4000>,
+ <0x00 0x284c0000 0x00 0x4000>,
+ <0x00 0x28400000 0x00 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
};
+&wkup_pmx3 {
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */
+ >;
+ };
+};
+
&main_pmx0 {
main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
compatible = "atmel,24c256";
reg = <0x50>;
};
+
+ tps659414: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck1-supply = <&vsys_3v3>;
+ buck2-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka1: buck1 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka2: buck2 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka3: buck3 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka4: buck4 {
+ regulator-name = "vdd_ddr_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_phyio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd1_lpddr4_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vda_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vdd_wk_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_pll_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ lp876441: pmic@4c {
+ compatible = "ti,lp8764-q1";
+ reg = <0x4c>;
+ system-power-controller;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ buck1-supply = <&vsys_3v3>;
+ buck2-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+
+ regulators: regulators {
+ buckb1: buck1 {
+ regulator-name = "vdd_cpu_avs";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-pre-ram;
+ };
+
+ buckb2: buck2 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb3: buck3 {
+ regulator-name = "vdd_core_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb4: buck4 {
+ regulator-name = "vdd_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&ospi0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+ status = "disabled";
+};
+
+&cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ pcie0_ep: pcie-ep@2900000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
+};
compatible = "ti,j721e-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x100000>,
+ <0x0 0x30b00000 0x0 0x20000>,
+ <0x0 0x30c00000 0x0 0x10000>,
+ <0x0 0x30d00000 0x0 0x8000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
};
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x0 0x43000014 0x0 0x4>;
+ wkup_conf: bus@43000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
wkup_pmx0: pinctrl@4301c000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
&wkup_pmx0 {
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+ >;
+ };
+
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
compatible = "atmel,24c512";
reg = <0x51>;
};
+
+ tps659413: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck123-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka123: buck123 {
+ regulator-name = "vdd_cpu_avs";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ bootph-pre-ram;
+ };
+
+ bucka4: buck4 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_phyio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd1_lpddr4_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vdda_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659411: pmic@4c {
+ compatible = "ti,tps6594-q1";
+ reg = <0x4c>;
+ system-power-controller;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ buck1234-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ buckb1234: buck1234 {
+ regulator-name = "vdd_core_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb5: buck5 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob1: ldo1 {
+ regulator-name = "vdd_sd_dv";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob2: ldo2 {
+ regulator-name = "vdd_usb_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob3: ldo3 {
+ regulator-name = "vdd_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob4: ldo4 {
+ regulator-name = "vda_pll_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&mcu_uart0 {
>;
};
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */
+ >;
+ };
+
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
compatible = "atmel,24c256";
reg = <0x50>;
};
+
+ tps659413: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck12-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka12: buck12 {
+ regulator-name = "vdd_cpu_avs";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ bootph-pre-ram;
+ };
+
+ bucka3: buck3 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka4: buck4 {
+ regulator-name = "vdd_ddr_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_phyio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd1_lpddr4_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vdda_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659411: pmic@4c {
+ compatible = "ti,tps6594-q1";
+ reg = <0x4c>;
+ system-power-controller;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ buck1234-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ buckb1234: buck1234 {
+ regulator-name = "vdd_core_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb5: buck5 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob1: ldo1 {
+ regulator-name = "vdd_sd_dv";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob2: ldo2 {
+ regulator-name = "vdd_usb_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob3: ldo3 {
+ regulator-name = "vdd_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob4: ldo4 {
+ regulator-name = "vda_pll_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&ospi0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+ status = "disabled";
+};
+
+&cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 276 41>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
+};
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
compatible = "ti,j721e-navss-main-udmap";
reg = <0x0 0x31150000 0x0 0x100>,
<0x0 0x34000000 0x0 0x80000>,
- <0x0 0x35000000 0x0 0x200000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x35000000 0x0 0x200000>,
+ <0x0 0x30b00000 0x0 0x20000>,
+ <0x0 0x30c00000 0x0 0x8000>,
+ <0x0 0x30d00000 0x0 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
};
- chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x00 0x43000014 0x00 0x4>;
+ wkup_conf: bus@43000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
secure_proxy_sa3: mailbox@43600000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x0 0x2aa00000 0x0 0x40000>,
+ <0x0 0x284a0000 0x0 0x4000>,
+ <0x0 0x284c0000 0x0 0x4000>,
+ <0x0 0x28400000 0x0 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
};
+&wkup_pmx1 {
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+ J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+ >;
+ };
+};
+
&wkup_pmx2 {
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
pinctrl-single,pins = <
compatible = "atmel,24c256";
reg = <0x50>;
};
+
+ tps659411: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck1234-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka1234: buck1234 {
+ regulator-name = "vdd_cpu_avs";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ bootph-pre-ram;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd_mcuwk_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vdd_mcu_gpioret_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659414: pmic@4c {
+ compatible = "ti,tps6594-q1";
+ reg = <0x4c>;
+ system-power-controller;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ buck1-supply = <&vsys_3v3>;
+ buck2-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ buckb1: buck1 {
+ regulator-name = "vdd_io_1v8_reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buckb2: buck2 {
+ regulator-name = "vdd_fpd_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb3: buck3 {
+ regulator-name = "vdd_phy_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb4: buck4 {
+ regulator-name = "vdd_ddr_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buckb5: buck5 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob1: ldo1 {
+ regulator-name = "vdd_wk_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob2: ldo2 {
+ regulator-name = "vdd_gpioret_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob3: ldo3 {
+ regulator-name = "vda_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldob4: ldo4 {
+ regulator-name = "vda_pll_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ lp876411: pmic@58 {
+ compatible = "ti,lp8764-q1";
+ reg = <0x58>;
+ system-power-controller;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ buck1234-supply = <&vsys_3v3>;
+
+ regulators {
+ buckc1234: buck1234 {
+ regulator-name = "vdd_core_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&main_i2c0 {
};
};
+&wkup_gpio0 {
+ status = "okay";
+};
+
&main_pmx0 {
bootph-all;
main_uart8_pins_default: main-uart8-default-pins {
};
};
+&wkup_pmx1 {
+ status = "okay";
+
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+ J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+ >;
+ };
+};
+
&wkup_pmx0 {
bootph-all;
mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
compatible = "atmel,24c256";
reg = <0x50>;
};
+
+ tps659413: pmic@48 {
+ compatible = "ti,tps6594-q1";
+ reg = <0x48>;
+ system-power-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&wkup_gpio0>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ti,primary-pmic;
+ buck12-supply = <&vsys_3v3>;
+ buck3-supply = <&vsys_3v3>;
+ buck4-supply = <&vsys_3v3>;
+ buck5-supply = <&vsys_3v3>;
+ ldo1-supply = <&vsys_3v3>;
+ ldo2-supply = <&vsys_3v3>;
+ ldo3-supply = <&vsys_3v3>;
+ ldo4-supply = <&vsys_3v3>;
+
+ regulators {
+ bucka12: buck12 {
+ regulator-name = "vdd_ddr_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka3: buck3 {
+ regulator-name = "vdd_ram_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka4: buck4 {
+ regulator-name = "vdd_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bucka5: buck5 {
+ regulator-name = "vdd_mcu_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa1: ldo1 {
+ regulator-name = "vdd_mcuio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa2: ldo2 {
+ regulator-name = "vdd_mcuio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa3: ldo3 {
+ regulator-name = "vds_dll_0v8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldoa4: ldo4 {
+ regulator-name = "vda_mcu_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&mcu_uart0 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
dma-coherent;
compatible = "ti,j721e-navss-main-udmap";
reg = <0x00 0x31150000 0x00 0x100>,
<0x00 0x34000000 0x00 0x80000>,
- <0x00 0x35000000 0x00 0x200000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x35000000 0x00 0x200000>,
+ <0x00 0x30b00000 0x00 0x20000>,
+ <0x00 0x30c00000 0x00 0x8000>,
+ <0x00 0x30d00000 0x00 0x4000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
};
};
- chipid@43000014 {
+ wkup_conf: bus@43000000 {
bootph-all;
- compatible = "ti,am654-chipid";
- reg = <0x00 0x43000014 0x00 0x4>;
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x43000000 0x20000>;
+
+ chipid: chipid@14 {
+ bootph-all;
+ compatible = "ti,am654-chipid";
+ reg = <0x14 0x4>;
+ };
};
secure_proxy_sa3: mailbox@43600000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x00 0x285c0000 0x00 0x100>,
<0x00 0x2a800000 0x00 0x40000>,
- <0x00 0x2aa00000 0x00 0x40000>;
- reg-names = "gcfg", "rchanrt", "tchanrt";
+ <0x00 0x2aa00000 0x00 0x40000>,
+ <0x00 0x284a0000 0x00 0x4000>,
+ <0x00 0x284c0000 0x00 0x4000>,
+ <0x00 0x28400000 0x00 0x2000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt",
+ "tchan", "rchan", "rflow";
msi-parent = <&main_udmass_inta>;
#dma-cells = <1>;
/dts-v1/;
/plugin/;
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- /* u14 - 0x40 - ina260 */
- /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
- si5332_0: si5332_0 { /* u17 */
+&{/} {
+ si5332_0: si5332-0 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
- si5332_1: si5332_1 { /* u17 */
+ si5332_1: si5332-1 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- si5332_2: si5332_2 { /* u17 */
+ si5332_2: si5332-2 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
};
- si5332_3: si5332_3 { /* u17 */
+ si5332_3: si5332-3 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
- si5332_4: si5332_4 { /* u17 */
+ si5332_4: si5332-4 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
- si5332_5: si5332_5 { /* u17 */
+ si5332_5: si5332-5 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
};
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ /* u14 - 0x40 - ina260 */
+ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
/* DP/USB 3.0 and SATA */
&psgtr {
status = "okay";
/dts-v1/;
/plugin/;
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- /* u14 - 0x40 - ina260 */
- /* u43 - 0x2d - usb5744 */
- /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
- si5332_0: si5332_0 { /* u17 */
+&{/} {
+ si5332_0: si5332-0 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
- si5332_1: si5332_1 { /* u17 */
+ si5332_1: si5332-1 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- si5332_2: si5332_2 { /* u17 */
+ si5332_2: si5332-2 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
};
- si5332_3: si5332_3 { /* u17 */
+ si5332_3: si5332-3 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
- si5332_4: si5332_4 { /* u17 */
+ si5332_4: si5332-4 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
- si5332_5: si5332_5 { /* u17 */
+ si5332_5: si5332-5 { /* u17 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
};
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ /* u14 - 0x40 - ina260 */
+ /* u43 - 0x2d - usb5744 */
+ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
/* DP/USB 3.0 */
&psgtr {
status = "okay";
&qspi { /* MIO 0-5 - U143 */
status = "okay";
spi_flash: flash@0 { /* MT25QU512A */
- compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
- #address-cells = <1>;
- #size-cells = <1>;
+ compatible = "jedec,spi-nor"; /* 64MB */
reg = <0>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
label = "Secure OS Storage";
reg = <0x2280000 0x20000>; /* 128KB */
};
- partition@22A0000 {
+ partition@22a0000 {
label = "User";
- reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+ reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
};
};
};
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem2_default>;
- phy0: ethernet-phy@5 {
- reg = <5>;
- ti,rx-internal-delay = <0x8>;
- ti,tx-internal-delay = <0xa>;
- ti,fifo-depth = <0x1>;
- ti,dp83867-rxctrl-strap-quirk;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
};
};
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: ethernet-phy@0 { /* VSC8211 */
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 { /* VSC8211 */
+ reg = <0>;
+ };
};
};
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy0>;
- ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
- reg = <0>;
- };
- ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
- reg = <7>;
- };
- ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
- reg = <3>;
- };
- ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
- reg = <8>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+ reg = <0>;
+ };
+ ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+ reg = <7>;
+ };
+ ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+ reg = <3>;
+ };
+ ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+ reg = <8>;
+ };
};
};
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem1_default>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
};
io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
};
- si5335_0: si5335_0 { /* clk0_usb - u23 */
+ si5335_0: si5335-0 { /* clk0_usb - u23 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
- si5335_1: si5335_1 { /* clk1_dp - u23 */
+ si5335_1: si5335-1 { /* clk1_dp - u23 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
};
- zynqmp_ipi: zynqmp_ipi {
+ zynqmp_ipi: zynqmp-ipi {
bootph-all;
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
ipi_mailbox_pmu1: mailbox@ff9905c0 {
bootph-all;
+ compatible = "xlnx,zynqmp-ipi-dest-mailbox";
reg = <0x0 0xff9905c0 0x0 0x20>,
<0x0 0xff9905e0 0x0 0x20>,
<0x0 0xff990e80 0x0 0x20>,
mbox-names = "tx", "rx";
};
- nvmem_firmware {
+ nvmem-firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
#size-cells = <1>;
- soc_revision: soc_revision@0 {
+ soc_revision: soc-revision@0 {
reg = <0x0 0x4>;
};
};
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
- #address-cells = <1>;
- #size-cells = <0>;
iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+ compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+ model = "Loongson-2K0500 Reference Board";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x00200000 0x0 0x0ee00000>,
+ <0x0 0x90000000 0x0 0x60000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ bus_id = <0x0>;
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ bus_id = <0x1>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@57 {
+ compatible = "atmel,24c16";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg = <0x0>;
+ clocks = <&cpu_clk>;
+ };
+ };
+
+ cpu_clk: cpu-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+ <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+ <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+ <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isa@16400000 {
+ compatible = "isa";
+ #size-cells = <1>;
+ #address-cells = <2>;
+ ranges = <1 0x0 0x0 0x16400000 0x4000>;
+ };
+
+ liointc0: interrupt-controller@1fe11400 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe11400 0x0 0x40>,
+ <0x0 0x1fe11040 0x0 0x8>;
+ reg-names = "main", "isr0";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-names = "int0";
+
+ loongson,parent_int_map = <0xffffffff>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ liointc1: interrupt-controller@1fe11440 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe11440 0x0 0x40>,
+ <0x0 0x1fe11048 0x0 0x8>;
+ reg-names = "main", "isr0";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ interrupt-names = "int2";
+
+ loongson,parent_int_map = <0x00000000>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0xffffffff>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ eiointc: interrupt-controller@1fe11600 {
+ compatible = "loongson,ls2k0500-eiointc";
+ reg = <0x0 0x1fe11600 0x0 0xea00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+ gmac0: ethernet@1f020000 {
+ compatible = "snps,dwmac-3.70a";
+ reg = <0x0 0x1f020000 0x0 0x10000>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@1f030000 {
+ compatible = "snps,dwmac-3.70a";
+ reg = <0x0 0x1f030000 0x0 0x10000>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ };
+
+ sata: sata@1f040000 {
+ compatible = "snps,spear-ahci";
+ reg = <0x0 0x1f040000 0x0 0x10000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <75>;
+ status = "disabled";
+ };
+
+ ehci0: usb@1f050000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x1f050000 0x0 0x8000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ohci0: usb@1f058000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x1f058000 0x0 0x8000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <72>;
+ status = "disabled";
+ };
+
+ uart0: serial@1ff40800 {
+ compatible = "ns16550a";
+ reg = <0x0 0x1ff40800 0x0 0x10>;
+ clock-frequency = <100000000>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <2>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1ff48000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff48000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ i2c@1ff48800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff48800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <15>;
+ status = "disabled";
+ };
+
+ i2c@1ff49000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff49000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ i2c@1ff49800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff49800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ i2c@1ff4a000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff4a000 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ i2c@1ff4a800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1ff4a800 0x0 0x0800>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <19>;
+ status = "disabled";
+ };
+
+ pmc: power-management@1ff6c000 {
+ compatible = "loongson,ls2k0500-pmc", "syscon";
+ reg = <0x0 0x1ff6c000 0x0 0x58>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <56>;
+ loongson,suspend-address = <0x0 0x1c000500>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x30>;
+ mask = <0x1>;
+ };
+
+ syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmc>;
+ offset = <0x14>;
+ mask = <0x3c00>;
+ value = <0x3c00>;
+ };
+ };
+
+ rtc0: rtc@1ff6c100 {
+ compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+ reg = <0x0 0x1ff6c100 0x0 0x100>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <35>;
+ status = "disabled";
+ };
+
+ pcie@1a000000 {
+ compatible = "loongson,ls2k-pci";
+ reg = <0x0 0x1a000000 0x0 0x02000000>,
+ <0xfe 0x0 0x0 0x20000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x0 0x5>;
+ ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+ <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+ pcie@0,0 {
+ reg = <0x0000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&eiointc>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+ ranges;
+ };
+
+ pcie@1,0 {
+ reg = <0x0800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&eiointc>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+ ranges;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k1000.dtsi"
+
+/ {
+ compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
+ model = "Loongson-2K1000 Reference Board";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x00200000 0x0 0x06e00000>,
+ <0x0 0x08000000 0x0 0x07000000>,
+ <0x0 0x90000000 0x1 0xe0000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@1 {
+ reg = <16>;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@57 {
+ compatible = "atmel,24c16";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ spi-max-frequency = <100000000>;
+ reg = <0>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&clk {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&pctrl {
+ status = "okay";
+
+ sdio_pins_default: sdio-pins {
+ sdio-pinmux {
+ groups = "sdio";
+ function = "sdio";
+ };
+ sdio-det-pinmux {
+ groups = "pwm2";
+ function = "gpio";
+ };
+ };
+
+ pwm1_pins_default: pwm1-pins {
+ pinmux {
+ groups = "pwm1";
+ function = "pwm1";
+ };
+ };
+
+ pwm0_pins_default: pwm0-pins {
+ pinmux {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+ };
+
+ i2c1_pins_default: i2c1-pins {
+ pinmux {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+ };
+
+ i2c0_pins_default: i2c0-pins {
+ pinmux {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+ };
+
+ nand_pins_default: nand-pins {
+ pinmux {
+ groups = "nand";
+ function = "nand";
+ };
+ };
+
+ hda_pins_default: hda-pins {
+ grp0-pinmux {
+ groups = "hda";
+ function = "hda";
+ };
+ grp1-pinmux {
+ groups = "i2s";
+ function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg= <0x0>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "loongson,la264";
+ device_type = "cpu";
+ reg = <0x1>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
+ };
+ };
+
+ ref_100m: clock-ref-100m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ref_100m";
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ /* i2c of the dvi eeprom edid */
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ /* i2c of the eeprom edid */
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tsensor 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <33000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+ <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+ <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+ <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-coherent;
+
+ liointc0: interrupt-controller@1fe01400 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe01400 0x0 0x40>,
+ <0x0 0x1fe01040 0x0 0x8>,
+ <0x0 0x1fe01140 0x0 0x8>;
+ reg-names = "main", "isr0", "isr1";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-names = "int0";
+ loongson,parent_int_map = <0xffffffff>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ liointc1: interrupt-controller@1fe01440 {
+ compatible = "loongson,liointc-2.0";
+ reg = <0x0 0x1fe01440 0x0 0x40>,
+ <0x0 0x1fe01048 0x0 0x8>,
+ <0x0 0x1fe01148 0x0 0x8>;
+ reg-names = "main", "isr0", "isr1";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ interrupt-names = "int1";
+ loongson,parent_int_map = <0x00000000>, /* int0 */
+ <0xffffffff>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ chipid@1fe00000 {
+ compatible = "loongson,ls2k-chipid";
+ reg = <0x0 0x1fe00000 0x0 0x30>;
+ little-endian;
+ };
+
+ pctrl: pinctrl@1fe00420 {
+ compatible = "loongson,ls2k-pinctrl";
+ reg = <0x0 0x1fe00420 0x0 0x18>;
+ status = "disabled";
+ };
+
+ clk: clock-controller@1fe00480 {
+ compatible = "loongson,ls2k-clk";
+ reg = <0x0 0x1fe00480 0x0 0x58>;
+ #clock-cells = <1>;
+ clocks = <&ref_100m>;
+ clock-names = "ref_100m";
+ status = "disabled";
+ };
+
+ gpio0: gpio@1fe00500 {
+ compatible = "loongson,ls2k-gpio";
+ reg = <0x0 0x1fe00500 0x0 0x38>;
+ ngpios = <64>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pctrl 0x0 0x0 15>,
+ <&pctrl 16 16 15>,
+ <&pctrl 32 32 10>,
+ <&pctrl 44 44 20>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>,
+ <29 IRQ_TYPE_LEVEL_HIGH>,
+ <30 IRQ_TYPE_LEVEL_HIGH>,
+ <30 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <>,
+ <>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ tsensor: thermal-sensor@1fe01500 {
+ compatible = "loongson,ls2k1000-thermal";
+ reg = <0x0 0x1fe01500 0x0 0x30>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ dma-controller@1fe00c00 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x0 0x1fe00c00 0x0 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe00c10 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x0 0x1fe00c10 0x0 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe00c20 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x0 0x1fe00c20 0x0 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe00c30 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x0 0x1fe00c30 0x0 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ dma-controller@1fe00c40 {
+ compatible = "loongson,ls2k1000-apbdma";
+ reg = <0x0 0x1fe00c40 0x0 0x8>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ uart0: serial@1fe20000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x1fe20000 0x0 0x10>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ i2c2: i2c@1fe21000 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1fe21000 0x0 0x8>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1fe21800 {
+ compatible = "loongson,ls2k-i2c";
+ reg = <0x0 0x1fe21800 0x0 0x8>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pmc: power-management@1fe27000 {
+ compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+ reg = <0x0 0x1fe27000 0x0 0x58>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ loongson,suspend-address = <0x0 0x1c000500>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x30>;
+ mask = <0x1>;
+ };
+
+ syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmc>;
+ offset = <0x14>;
+ mask = <0x3c00>;
+ value = <0x3c00>;
+ };
+ };
+
+ rtc0: rtc@1fe27800 {
+ compatible = "loongson,ls2k1000-rtc";
+ reg = <0x0 0x1fe27800 0x0 0x100>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ spi0: spi@1fff0220 {
+ compatible = "loongson,ls2k1000-spi";
+ reg = <0x0 0x1fff0220 0x0 0x10>;
+ clocks = <&clk LOONGSON2_BOOT_CLK>;
+ status = "disabled";
+ };
+
+ pcie@1a000000 {
+ compatible = "loongson,ls2k-pci";
+ reg = <0x0 0x1a000000 0x0 0x02000000>,
+ <0xfe 0x0 0x0 0x20000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x0 0xff>;
+ ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>,
+ <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+ gmac0: ethernet@3,0 {
+ reg = <0x1800 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@3,1 {
+ reg = <0x1900 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ status = "disabled";
+ };
+
+ ehci0: usb@4,1 {
+ reg = <0x2100 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@4,2 {
+ reg = <0x2200 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc1>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ display@6,0 {
+ reg = <0x3000 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hda@7,0 {
+ reg = <0x3800 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sata: sata@8,0 {
+ reg = <0x4000 0x0 0x0 0x0 0x0>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ reg = <0x4800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@a,0 {
+ reg = <0x5000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&liointc1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@b,0 {
+ reg = <0x5800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&liointc1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@c,0 {
+ reg = <0x6000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&liointc1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@d,0 {
+ reg = <0x6800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&liointc1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@e,0 {
+ reg = <0x7000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&liointc1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+ compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+ model = "Loongson-2K2000 Reference Board";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x00200000 0x0 0x0ee00000>,
+ <0x0 0x90000000 0x0 0x70000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
+
+&xhci1 {
+ status = "okay";
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+};
+
+&gmac2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@1 {
+ compatible = "loongson,la364";
+ device_type = "cpu";
+ reg = <0x0>;
+ clocks = <&cpu_clk>;
+ };
+
+ cpu1: cpu@2 {
+ compatible = "loongson,la364";
+ device_type = "cpu";
+ reg = <0x1>;
+ clocks = <&cpu_clk>;
+ };
+ };
+
+ cpu_clk: cpu-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1400000000>;
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+ <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+ <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmc: power-management@100d0000 {
+ compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+ reg = <0x0 0x100d0000 0x0 0x58>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <47>;
+ loongson,suspend-address = <0x0 0x1c000500>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x30>;
+ mask = <0x1>;
+ };
+
+ syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmc>;
+ offset = <0x14>;
+ mask = <0x3c00>;
+ value = <0x3c00>;
+ };
+ };
+
+ liointc: interrupt-controller@1fe01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0x0 0x1fe01400 0x0 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-names = "int0";
+ loongson,parent_int_map = <0xffffffff>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ eiointc: interrupt-controller@1fe01600 {
+ compatible = "loongson,ls2k2000-eiointc";
+ reg = <0x0 0x1fe01600 0x0 0xea00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+ pic: interrupt-controller@10000000 {
+ compatible = "loongson,pch-pic-1.0";
+ reg = <0x0 0x10000000 0x0 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ loongson,pic-base-vec = <0>;
+ interrupt-parent = <&eiointc>;
+ };
+
+ msi: msi-controller@1fe01140 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0x0 0x1fe01140 0x0 0x8>;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <192>;
+ interrupt-parent = <&eiointc>;
+ };
+
+ rtc0: rtc@100d0100 {
+ compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+ reg = <0x0 0x100d0100 0x0 0x100>;
+ interrupt-parent = <&pic>;
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0x0 0x1fe001e0 0x0 0x10>;
+ clock-frequency = <100000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ pcie@1a000000 {
+ compatible = "loongson,ls2k-pci";
+ reg = <0x0 0x1a000000 0x0 0x02000000>,
+ <0xfe 0x0 0x0 0x20000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x0 0xff>;
+ ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+ <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+ gmac0: ethernet@3,0 {
+ reg = <0x1800 0x0 0x0 0x0 0x0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@3,1 {
+ reg = <0x1900 0x0 0x0 0x0 0x0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@3,2 {
+ reg = <0x1a00 0x0 0x0 0x0 0x0>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ xhci0: usb@4,0 {
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ xhci1: usb@19,0 {
+ reg = <0xc800 0x0 0x0 0x0 0x0>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ display@6,1 {
+ reg = <0x3100 0x0 0x0 0x0 0x0>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ hda@7,0 {
+ reg = <0x3800 0x0 0x0 0x0 0x0>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ sata: sata@8,0 {
+ reg = <0x4000 0x0 0x0 0x0 0x0>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ reg = <0x4800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@a,0 {
+ reg = <0x5000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@b,0 {
+ reg = <0x5800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@c,0 {
+ reg = <0x6000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@d,0 {
+ reg = <0x6800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@e,0 {
+ reg = <0x7000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@f,0 {
+ reg = <0x7800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@10,0 {
+ reg = <0x8000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+ };
+ };
+};
reg = <0xf0000 0x1000>;
interrupts = <18 2 0 0>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
- fsl,tmu-calibration = <0x00000000 0x0000000f
- 0x00000001 0x00000017
- 0x00000002 0x0000001e
- 0x00000003 0x00000026
- 0x00000004 0x0000002e
- 0x00000005 0x00000035
- 0x00000006 0x0000003d
- 0x00000007 0x00000044
- 0x00000008 0x0000004c
- 0x00000009 0x00000053
- 0x0000000a 0x0000005b
- 0x0000000b 0x00000064
-
- 0x00010000 0x00000011
- 0x00010001 0x0000001c
- 0x00010002 0x00000024
- 0x00010003 0x0000002b
- 0x00010004 0x00000034
- 0x00010005 0x00000039
- 0x00010006 0x00000042
- 0x00010007 0x0000004c
- 0x00010008 0x00000051
- 0x00010009 0x0000005a
- 0x0001000a 0x00000063
-
- 0x00020000 0x00000013
- 0x00020001 0x00000019
- 0x00020002 0x00000024
- 0x00020003 0x0000002c
- 0x00020004 0x00000035
- 0x00020005 0x0000003d
- 0x00020006 0x00000046
- 0x00020007 0x00000050
- 0x00020008 0x00000059
-
- 0x00030000 0x00000002
- 0x00030001 0x0000000d
- 0x00030002 0x00000019
- 0x00030003 0x00000024>;
+ fsl,tmu-calibration =
+ <0x00000000 0x0000000f>,
+ <0x00000001 0x00000017>,
+ <0x00000002 0x0000001e>,
+ <0x00000003 0x00000026>,
+ <0x00000004 0x0000002e>,
+ <0x00000005 0x00000035>,
+ <0x00000006 0x0000003d>,
+ <0x00000007 0x00000044>,
+ <0x00000008 0x0000004c>,
+ <0x00000009 0x00000053>,
+ <0x0000000a 0x0000005b>,
+ <0x0000000b 0x00000064>,
+
+ <0x00010000 0x00000011>,
+ <0x00010001 0x0000001c>,
+ <0x00010002 0x00000024>,
+ <0x00010003 0x0000002b>,
+ <0x00010004 0x00000034>,
+ <0x00010005 0x00000039>,
+ <0x00010006 0x00000042>,
+ <0x00010007 0x0000004c>,
+ <0x00010008 0x00000051>,
+ <0x00010009 0x0000005a>,
+ <0x0001000a 0x00000063>,
+
+ <0x00020000 0x00000013>,
+ <0x00020001 0x00000019>,
+ <0x00020002 0x00000024>,
+ <0x00020003 0x0000002c>,
+ <0x00020004 0x00000035>,
+ <0x00020005 0x0000003d>,
+ <0x00020006 0x00000046>,
+ <0x00020007 0x00000050>,
+ <0x00020008 0x00000059>,
+
+ <0x00030000 0x00000002>,
+ <0x00030001 0x0000000d>,
+ <0x00030002 0x00000019>,
+ <0x00030003 0x00000024>;
#thermal-sensor-cells = <1>;
};
reg = <0xf0000 0x1000>;
interrupts = <18 2 0 0>;
fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
- fsl,tmu-calibration = <0x00000000 0x00000025
- 0x00000001 0x00000028
- 0x00000002 0x0000002d
- 0x00000003 0x00000031
- 0x00000004 0x00000036
- 0x00000005 0x0000003a
- 0x00000006 0x00000040
- 0x00000007 0x00000044
- 0x00000008 0x0000004a
- 0x00000009 0x0000004f
- 0x0000000a 0x00000054
-
- 0x00010000 0x0000000d
- 0x00010001 0x00000013
- 0x00010002 0x00000019
- 0x00010003 0x0000001f
- 0x00010004 0x00000025
- 0x00010005 0x0000002d
- 0x00010006 0x00000033
- 0x00010007 0x00000043
- 0x00010008 0x0000004b
- 0x00010009 0x00000053
-
- 0x00020000 0x00000010
- 0x00020001 0x00000017
- 0x00020002 0x0000001f
- 0x00020003 0x00000029
- 0x00020004 0x00000031
- 0x00020005 0x0000003c
- 0x00020006 0x00000042
- 0x00020007 0x0000004d
- 0x00020008 0x00000056
-
- 0x00030000 0x00000012
- 0x00030001 0x0000001d>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000025>,
+ <0x00000001 0x00000028>,
+ <0x00000002 0x0000002d>,
+ <0x00000003 0x00000031>,
+ <0x00000004 0x00000036>,
+ <0x00000005 0x0000003a>,
+ <0x00000006 0x00000040>,
+ <0x00000007 0x00000044>,
+ <0x00000008 0x0000004a>,
+ <0x00000009 0x0000004f>,
+ <0x0000000a 0x00000054>,
+
+ <0x00010000 0x0000000d>,
+ <0x00010001 0x00000013>,
+ <0x00010002 0x00000019>,
+ <0x00010003 0x0000001f>,
+ <0x00010004 0x00000025>,
+ <0x00010005 0x0000002d>,
+ <0x00010006 0x00000033>,
+ <0x00010007 0x00000043>,
+ <0x00010008 0x0000004b>,
+ <0x00010009 0x00000053>,
+
+ <0x00020000 0x00000010>,
+ <0x00020001 0x00000017>,
+ <0x00020002 0x0000001f>,
+ <0x00020003 0x00000029>,
+ <0x00020004 0x00000031>,
+ <0x00020005 0x0000003c>,
+ <0x00020006 0x00000042>,
+ <0x00020007 0x0000004d>,
+ <0x00020008 0x00000056>,
+
+ <0x00030000 0x00000012>,
+ <0x00030001 0x0000001d>;
#thermal-sensor-cells = <1>;
};
status = "okay";
};
+&syscontroller_qspi {
+ /*
+ * The flash *is* there, but Icicle kits that have engineering sample
+ * silicon (write?) access to this flash to non-functional. The system
+ * controller itself can actually access it, but the MSS cannot write
+ * an image there. Instantiating a coreQSPI in the fabric & connecting
+ * it to the flash instead should work though. Pre-production or later
+ * silicon does not have this issue.
+ */
+ status = "disabled";
+
+ sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
&usb {
status = "okay";
dr_mode = "host";
mboxes = <&mbox 0>;
};
+ scbclk: mssclkclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <80000000>;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;
#mbox-cells = <1>;
status = "disabled";
};
+
+ syscontroller_qspi: spi@37020100 {
+ compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x37020100 0x0 0x100>;
+ interrupt-parent = <&plic>;
+ interrupts = <110>;
+ clocks = <&scbclk>;
+ status = "disabled";
+ };
};
};
reg = <0x0>;
status = "okay";
riscv,isa = "rv64imafdc";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm";
mmu-type = "riscv,sv39";
i-cache-size = <0x8000>;
i-cache-line-size = <0x40>;
interrupt-parent = <&gpio>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
*/
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
/ {
compatible = "sophgo,cv1800b";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus: cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- timebase-frequency = <25000000>;
-
- cpu0: cpu@0 {
- compatible = "thead,c906", "riscv";
- device_type = "cpu";
- reg = <0>;
- d-cache-block-size = <64>;
- d-cache-sets = <512>;
- d-cache-size = <65536>;
- i-cache-block-size = <64>;
- i-cache-sets = <128>;
- i-cache-size = <32768>;
- mmu-type = "riscv,sv39";
- riscv,isa = "rv64imafdc";
- riscv,isa-base = "rv64i";
- riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
- "zifencei", "zihpm";
-
- cpu0_intc: interrupt-controller {
- compatible = "riscv,cpu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
- };
-
- osc: oscillator {
- compatible = "fixed-clock";
- clock-output-names = "osc_25m";
- #clock-cells = <0>;
- };
-
- soc {
- compatible = "simple-bus";
- interrupt-parent = <&plic>;
- #address-cells = <1>;
- #size-cells = <1>;
- dma-noncoherent;
- ranges;
-
- uart0: serial@4140000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x04140000 0x100>;
- interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart1: serial@4150000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x04150000 0x100>;
- interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart2: serial@4160000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x04160000 0x100>;
- interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart3: serial@4170000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x04170000 0x100>;
- interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart4: serial@41c0000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x041c0000 0x100>;
- interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
+};
- plic: interrupt-controller@70000000 {
- compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
- reg = <0x70000000 0x4000000>;
- interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- riscv,ndev = <101>;
- };
+&plic {
+ compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+};
- clint: timer@74000000 {
- compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
- reg = <0x74000000 0x10000>;
- interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
- };
- };
+&clint {
+ compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "cv1812h.dtsi"
+
+/ {
+ model = "Huashan Pi";
+ compatible = "sophgo,huashan-pi", "sophgo,cv1812h";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ coprocessor_rtos: region@8fe00000 {
+ reg = <0x8fe00000 0x200000>;
+ no-map;
+ };
+ };
+};
+
+&osc {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
+
+/ {
+ compatible = "sophgo,cv1812h";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&plic {
+ compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+};
+
+&clint {
+ compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <25000000>;
+
+ cpu0: cpu@0 {
+ compatible = "thead,c906", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <512>;
+ d-cache-size = <65536>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+ "zifencei", "zihpm";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_25m";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-noncoherent;
+ ranges;
+
+ gpio0: gpio@3020000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@3021000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3021000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@3022000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3022000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio@3023000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3023000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart0: serial@4140000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04140000 0x100>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@4150000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04150000 0x100>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@4160000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04160000 0x100>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@4170000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04170000 0x100>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@41c0000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x041c0000 0x100>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@70000000 {
+ reg = <0x70000000 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <101>;
+ };
+
+ clint: timer@74000000 {
+ reg = <0x74000000 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+ };
+ };
+};
<&cpu63_intc 3>;
};
- clint_mtimer0: timer@70ac000000 {
+ clint_mtimer0: timer@70ac004000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac000000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac004000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu0_intc 7>,
<&cpu1_intc 7>,
<&cpu2_intc 7>,
<&cpu3_intc 7>;
};
- clint_mtimer1: timer@70ac010000 {
+ clint_mtimer1: timer@70ac014000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac010000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac014000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu4_intc 7>,
<&cpu5_intc 7>,
<&cpu6_intc 7>,
<&cpu7_intc 7>;
};
- clint_mtimer2: timer@70ac020000 {
+ clint_mtimer2: timer@70ac024000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac020000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac024000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu8_intc 7>,
<&cpu9_intc 7>,
<&cpu10_intc 7>,
<&cpu11_intc 7>;
};
- clint_mtimer3: timer@70ac030000 {
+ clint_mtimer3: timer@70ac034000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac030000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac034000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu12_intc 7>,
<&cpu13_intc 7>,
<&cpu14_intc 7>,
<&cpu15_intc 7>;
};
- clint_mtimer4: timer@70ac040000 {
+ clint_mtimer4: timer@70ac044000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac040000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac044000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu16_intc 7>,
<&cpu17_intc 7>,
<&cpu18_intc 7>,
<&cpu19_intc 7>;
};
- clint_mtimer5: timer@70ac050000 {
+ clint_mtimer5: timer@70ac054000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac050000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac054000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu20_intc 7>,
<&cpu21_intc 7>,
<&cpu22_intc 7>,
<&cpu23_intc 7>;
};
- clint_mtimer6: timer@70ac060000 {
+ clint_mtimer6: timer@70ac064000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac060000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac064000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu24_intc 7>,
<&cpu25_intc 7>,
<&cpu26_intc 7>,
<&cpu27_intc 7>;
};
- clint_mtimer7: timer@70ac070000 {
+ clint_mtimer7: timer@70ac074000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac070000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac074000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu28_intc 7>,
<&cpu29_intc 7>,
<&cpu30_intc 7>,
<&cpu31_intc 7>;
};
- clint_mtimer8: timer@70ac080000 {
+ clint_mtimer8: timer@70ac084000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac080000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac084000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu32_intc 7>,
<&cpu33_intc 7>,
<&cpu34_intc 7>,
<&cpu35_intc 7>;
};
- clint_mtimer9: timer@70ac090000 {
+ clint_mtimer9: timer@70ac094000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac090000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac094000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu36_intc 7>,
<&cpu37_intc 7>,
<&cpu38_intc 7>,
<&cpu39_intc 7>;
};
- clint_mtimer10: timer@70ac0a0000 {
+ clint_mtimer10: timer@70ac0a4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0a0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0a4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu40_intc 7>,
<&cpu41_intc 7>,
<&cpu42_intc 7>,
<&cpu43_intc 7>;
};
- clint_mtimer11: timer@70ac0b0000 {
+ clint_mtimer11: timer@70ac0b4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0b0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0b4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu44_intc 7>,
<&cpu45_intc 7>,
<&cpu46_intc 7>,
<&cpu47_intc 7>;
};
- clint_mtimer12: timer@70ac0c0000 {
+ clint_mtimer12: timer@70ac0c4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0c0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0c4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu48_intc 7>,
<&cpu49_intc 7>,
<&cpu50_intc 7>,
<&cpu51_intc 7>;
};
- clint_mtimer13: timer@70ac0d0000 {
+ clint_mtimer13: timer@70ac0d4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0d0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0d4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu52_intc 7>,
<&cpu53_intc 7>,
<&cpu54_intc 7>,
<&cpu55_intc 7>;
};
- clint_mtimer14: timer@70ac0e0000 {
+ clint_mtimer14: timer@70ac0e4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0e0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0e4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu56_intc 7>,
<&cpu57_intc 7>,
<&cpu58_intc 7>,
<&cpu59_intc 7>;
};
- clint_mtimer15: timer@70ac0f0000 {
+ clint_mtimer15: timer@70ac0f4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
- reg = <0x00000070 0xac0f0000 0x00000000 0x00007ff8>;
+ reg = <0x00000070 0xac0f4000 0x00000000 0x0000c000>;
+ reg-names = "mtimecmp";
interrupts-extended = <&cpu60_intc 7>,
<&cpu61_intc 7>,
<&cpu62_intc 7>,
/ {
aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdio1;
serial0 = &uart3;
};
label = "ack";
};
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dma-reserved@fa000000 {
+ reg = <0x0 0xfa000000 0x0 0x1000000>;
+ no-map;
+ };
+
+ linux,dma@107a000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10 0x7a000000 0x0 0x1000000>;
+ no-map;
+ linux,dma-default;
+ };
+ };
+
+ soc {
+ dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>,
+ <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
+ <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
};
&gpio {
};
};
+ sdio0_pins: sdio0-0 {
+ clk-pins {
+ pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
+ GPO_ENABLE, GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ sdio-pins {
+ pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE,
+ GPI_SDIO0_PAD_CARD_DETECT_N)>,
+ <GPIOMUX(53,
+ GPO_SDIO0_PAD_CCMD_OUT,
+ GPO_SDIO0_PAD_CCMD_OEN,
+ GPI_SDIO0_PAD_CCMD_IN)>,
+ <GPIOMUX(49,
+ GPO_SDIO0_PAD_CDATA_OUT_BIT0,
+ GPO_SDIO0_PAD_CDATA_OEN_BIT0,
+ GPI_SDIO0_PAD_CDATA_IN_BIT0)>,
+ <GPIOMUX(50,
+ GPO_SDIO0_PAD_CDATA_OUT_BIT1,
+ GPO_SDIO0_PAD_CDATA_OEN_BIT1,
+ GPI_SDIO0_PAD_CDATA_IN_BIT1)>,
+ <GPIOMUX(51,
+ GPO_SDIO0_PAD_CDATA_OUT_BIT2,
+ GPO_SDIO0_PAD_CDATA_OEN_BIT2,
+ GPI_SDIO0_PAD_CDATA_IN_BIT2)>,
+ <GPIOMUX(52,
+ GPO_SDIO0_PAD_CDATA_OUT_BIT3,
+ GPO_SDIO0_PAD_CDATA_OEN_BIT3,
+ GPI_SDIO0_PAD_CDATA_IN_BIT3)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ sdio1_pins: sdio1-0 {
+ clk-pins {
+ pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
+ GPO_ENABLE, GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ sdio-pins {
+ pinmux = <GPIOMUX(29,
+ GPO_SDIO1_PAD_CCMD_OUT,
+ GPO_SDIO1_PAD_CCMD_OEN,
+ GPI_SDIO1_PAD_CCMD_IN)>,
+ <GPIOMUX(36,
+ GPO_SDIO1_PAD_CDATA_OUT_BIT0,
+ GPO_SDIO1_PAD_CDATA_OEN_BIT0,
+ GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
+ <GPIOMUX(30,
+ GPO_SDIO1_PAD_CDATA_OUT_BIT1,
+ GPO_SDIO1_PAD_CDATA_OEN_BIT1,
+ GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
+ <GPIOMUX(34,
+ GPO_SDIO1_PAD_CDATA_OUT_BIT2,
+ GPO_SDIO1_PAD_CDATA_OEN_BIT2,
+ GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
+ <GPIOMUX(31,
+ GPO_SDIO1_PAD_CDATA_OUT_BIT3,
+ GPO_SDIO1_PAD_CDATA_OEN_BIT3,
+ GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
uart3_pins: uart3-0 {
rx-pins {
pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
clock-frequency = <27000000>;
};
+&sdio0 {
+ broken-cd;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_pins>;
+ status = "okay";
+};
+
+&sdio1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ cap-power-off-card;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio1_pins>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
i-tlb-sets = <1>;
i-tlb-size = <32>;
mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
i-tlb-sets = <1>;
i-tlb-size = <32>;
mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
thermal-sensors = <&sfctemp>;
trips {
- cpu_alert0 {
+ cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit {
+ cpu-crit {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
};
};
- osc_sys: osc_sys {
+ osc_sys: osc-sys {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- osc_aud: osc_aud {
+ osc_aud: osc-aud {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- gmac_rmii_ref: gmac_rmii_ref {
+ gmac_rmii_ref: gmac-rmii-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */
clock-frequency = <0>;
};
- gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+ gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */
interrupt-parent = <&plic>;
#address-cells = <2>;
#size-cells = <2>;
+ dma-noncoherent;
ranges;
clint: clint@2000000 {
compatible = "starfive,jh7100-clint", "sifive,clint0";
reg = <0x0 0x2000000 0x0 0x10000>;
- interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
- &cpu1_intc 3 &cpu1_intc 7>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache";
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ interrupts = <128>, <130>, <131>, <129>;
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
};
plic: interrupt-controller@c000000 {
compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
reg = <0x0 0xc000000 0x0 0x4000000>;
- interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
- &cpu1_intc 11 &cpu1_intc 9>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
riscv,ndev = <133>;
};
+ sdio0: mmc@10000000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x0 0x10000000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_SDIO0_AHB>,
+ <&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>;
+ clock-names = "biu", "ciu";
+ interrupts = <4>;
+ data-addr = <0>;
+ fifo-depth = <32>;
+ fifo-watermark-aligned;
+ status = "disabled";
+ };
+
+ sdio1: mmc@10010000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x0 0x10010000 0x0 0x10000>;
+ clocks = <&clkgen JH7100_CLK_SDIO1_AHB>,
+ <&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>;
+ clock-names = "biu", "ciu";
+ interrupts = <5>;
+ data-addr = <0>;
+ fifo-depth = <32>;
+ fifo-watermark-aligned;
+ status = "disabled";
+ };
+
clkgen: clock-controller@11800000 {
compatible = "starfive,jh7100-clkgen";
reg = <0x0 0x11800000 0x0 0x10000>;
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit {
+ cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
clock-frequency = <62500000>;
};
+&sdhci_clk {
+ clock-frequency = <198000000>;
+};
+
&uart_sclk {
clock-frequency = <100000000>;
};
status = "okay";
};
+&emmc {
+ bus-width = <8>;
+ max-frequency = <198000000>;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ max-frequency = <198000000>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
clock-frequency = <62500000>;
};
+&sdhci_clk {
+ clock-frequency = <198000000>;
+};
+
&uart_sclk {
clock-frequency = <100000000>;
};
&dmac0 {
status = "okay";
};
+
+&emmc {
+ bus-width = <8>;
+ max-frequency = <198000000>;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ max-frequency = <198000000>;
+ status = "okay";
+};
#clock-cells = <0>;
};
+ sdhci_clk: sdhci-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <198000000>;
+ clock-output-names = "sdhci_clk";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
status = "disabled";
};
+ emmc: mmc@ffe7080000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7080000 0x0 0x10000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio0: mmc@ffe7090000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7090000 0x0 0x10000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio1: mmc@ffe70a0000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe70a0000 0x0 0x10000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
projects / u-boot.git / commitdiff
