rockchip: odroid-go2: Use common bss and stack addresses

U-Boot proper pre-reloc is currently running out of memory on PX30
Ringneck and it is thus impossible to boot into U-Boot CLI. It is
assumed the same problem can be seen on other PX30 boards though I
cannot guarantee it since I don't have access to them.

Fix this by migrating to the common bss and stack addresses for PX30,
which drastically increases the size of the pre-reloc allocation pool (8
times bigger now). The memory layout in SPL and U-Boot proper now
match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>

diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
index 3c1abb83ed95690a049317ef296f20d4191edd7e..f4c9b02e12fca29c729731f95d1053dca3a4a26b 100644 (file)
--- a/configs/odroid-go2_defconfig
+++ b/configs/odroid-go2_defconfig
@@ -2,29 +2,17 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2"
-CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_PX30=y
+# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
 CONFIG_TARGET_ODROID_GO2=y
 CONFIG_DEBUG_UART_CHANNEL=1
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
+# CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
-CONFIG_SPL_STACK_R=y
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
@@ -44,11 +32,11 @@ CONFIG_SPL_MAX_SIZE=0x20000
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 # CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set
 # CONFIG_TPL_BANNER_PRINT is not set
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_ELF is not set