ARM: zynq: Add support for zc770-xm011

Add xm011 DTS file and related configs and configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8ebd6934320b05692e325845f7afeb8b33677dca..06fbd8b0af20dac2b38c83edc968810044b5ace1 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
        zynq-microzed.dtb \
        zynq-picozed.dtb \
        zynq-zc770-xm010.dtb \
+       zynq-zc770-xm011.dtb \
        zynq-zc770-xm012.dtb \
        zynq-zc770-xm013.dtb
 dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb

diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
new file mode 100644 (file)
index 0000000..d38c820
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,65 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+/ {
+       compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+       model = "Xilinx Zynq";
+
+       aliases {
+               i2c0 = &i2c1;
+               serial0 = &uart1;
+               spi0 = &spi0;
+       };
+
+       chosen {
+               bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+               linux,stdout-path = &uart1;
+               stdout-path = &uart1;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x40000000>;
+       };
+
+       usb_phy1: phy1 {
+               compatible = "usb-nop-xceiv";
+               #phy-cells = <0>;
+       };
+};
+
+&spi0 {
+       status = "okay";
+       num-cs = <4>;
+       is-decoded-cs = <0>;
+};
+
+&can0 {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       m24c02_eeprom@52 {
+               compatible = "at,24c02";
+               reg = <0x52>;
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+       dr_mode = "host";
+       usb-phy = <&usb_phy1>;
+};

diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
new file mode 100644 (file)
index 0000000..8f9221d
--- /dev/null
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ZYNQ=y
+CONFIG_TARGET_ZYNQ_ZC770=y
+CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set

diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
index 16b904743f1e97f5487f850f81f6c0383a40c724..7a1b8729e5b17a83c8526ca553af2e54cddaacf9 100644 (file)
--- a/include/configs/zynq_zc770.h
+++ b/include/configs/zynq_zc770.h
@@ -21,6 +21,9 @@
 # define CONFIG_ZYNQ_SDHCI0
 # define CONFIG_ZYNQ_SPI
 
+#elif defined(CONFIG_ZC770_XM011)
+# define CONFIG_ZYNQ_SERIAL_UART1
+
 #elif defined(CONFIG_ZC770_XM012)
 # define CONFIG_ZYNQ_SERIAL_UART1
 # undef CONFIG_SYS_NO_FLASH