OMAP3 Beagle Pin Mux initialization glitch fix

The below patch reverses the order of two segments in the board file.
Output pins need to have their values initialized, before they are
exposed to the logic outside the chip.

Signed-off-by: Bob Feretich <bob.feretich@rafresearch.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ab50514f255daefa8b3d24d34b0b93536f7e201b..15d061a0082aa1dc87c54e23551f8e3503ce08c9 100644 (file)
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -301,17 +301,17 @@ int misc_init_r(void)
        twl4030_power_init();
        twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
 
-       /* Configure GPIOs to output */
-       writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
-       writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
-               GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
-
-       /* Set GPIOs */
+       /* Set GPIO states before they are made outputs */
        writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
                &gpio6_base->setdataout);
        writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
                GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
 
+       /* Configure GPIOs to output */
+       writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
+       writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+               GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
+
        dieid_num_r();
 
        return 0;