arm: dts: k3-am654: remove duplicate wkup_uart0

With the Linux and U-Boot board files unified, we now have a duplicate
wkup_uart0 node. Remove it

Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 50e6be611829412655f09f95351140f6beef6060..fb13a17b1dc646d25496d2449d87330c1b01985c 100644 (file)
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -18,7 +18,6 @@
                ethernet0 = &cpsw_port1;
                remoteproc0 = &sysctrler;
                remoteproc1 = &a53_0;
-               serial0 = &wkup_uart0;
                serial1 = &mcu_uart0;
                serial2 = &main_uart0;
                spi0 = &ospi0;
@@ -117,8 +116,6 @@
 };
 
 &wkup_uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&wkup_uart0_pins_default>;
        status = "okay";
        bootph-pre-ram;
 };
@@ -146,15 +143,6 @@
 };
 
 &wkup_pmx0 {
-       wkup_uart0_pins_default: wkup_uart0_pins_default {
-               pinctrl-single,pins = <
-                       AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0)  /* (AB1) WKUP_UART0_RXD */
-                       AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
-                       AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)  /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-                       AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
-               >;
-       };
-
        wkup_vtt_pins_default: wkup_vtt_pins_default {
                pinctrl-single,pins = <
                        AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)  /* WKUP_GPIO0_28 */