configs: gxp: add gxp_defconfig

This is the initial very basic config that enables the U-Boot console on
the hpe gxp soc.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>

diff --git a/configs/gxp_defconfig b/configs/gxp_defconfig
new file mode 100644 (file)
index 0000000..4408c6c
--- /dev/null
+++ b/configs/gxp_defconfig
@@ -0,0 +1,60 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_GXP=y
+CONFIG_SYS_MALLOC_LEN=0x4000000
+CONFIG_GXP_VROM_64MB=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x60000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DEFAULT_DEVICE_TREE="hpe-bmc-dl360gen10"
+CONFIG_ENV_OFFSET_REDUND=0x70000
+CONFIG_SYS_LOAD_ADDR=0x40100000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=5
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlyprintk console=ttyS2,115200 user_debug=31"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run spiboot"
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="gxp# "
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_MISC=y
+CONFIG_CMD_FAT=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_NETCONSOLE=y
+CONFIG_MISC=y
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=3
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_POWER is not set
+CONFIG_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_GXP_SPI=y
+CONFIG_TIMER=y
+CONFIG_GXP_TIMER=y
+CONFIG_SHA512=y